| ▶ 기타 석유제품 |
| KS M ISO 11357-2:2015 |
플라스틱 - 시차주사열량계(DSC) - 제 2부: 유리 전이 온도 및 유리 전이단계 높이의 측정
10.1 유리 전이 온도 측정 |
0 ℃ ~ 300 ℃ |
소재지 |
| ▶ 전자기적합성 |
| ASTM D4935-18 |
Standard test method for measuring the electromagnetic shielding effectiveness of planar materials |
30 MHz ~ 1.5 GHz |
부속시설-1 |
| CISPR 25:2021 |
Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers
(Exception)
5 Measurement of emissions received by an antenna on the same vehicle
6.6 Radiated emissions from components/modules – Stripline method |
CEV: 150 kHz ∼ 108 MHz
CEC: 150 kHz ∼ 245 MHz
RE: 150 kHz ∼ 5.925 GHz |
부속시설-1 |
| ISO 10605:2023 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
± 25 ㎸ |
부속시설-1 |
| ISO 11452-2:2019 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
(Exception)
8 Test setup for DUT powered by a shielded power system |
Max. 100 V/m
(80 MHz ∼ 18 GHz) |
부속시설-1 |
| ISO 11452-4:2020 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
(Exception)
6.2 TWC test method
8 Test setup for DUT powered by a shielded power system |
Max. 200 mA
(0.1 MHz ∼ 400 MHz) |
부속시설-1 |
| ISO 11452-8:2015 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
1 000 A/m
(DC, 15 Hz ～ 150 kHz) |
부속시설-1 |
| ISO 11452-9:2021 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters
(Exception)
7.3 HV power supply system |
26 MHz ~ 5.85 GHz |
부속시설-1 |
| ISO 16750-2:2023 |
Road vehicles – Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads
(Exception)
4.3 Overvoltage |
0 V ～ 60 V |
부속시설-1 |
| ISO 7637-2:2011 |
Road vehicles – Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
-600 V ～ +300 V |
부속시설-1 |
| ISO 7637-3:2016 |
Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
-120 V ～ +80 V |
부속시설-1 |
| KS C 0304:2014 |
평면재료의 전자파 차폐효과 측정방법
3. 원거리장 차폐 효과 측정방법 |
30 MHz ~ 1.0 GHz |
부속시설-1 |
| MIL-STD-461E:1999 |
Department of defense interface standard Requirements for the control of electromagnetic interference characteristics of subsystems and equipment
(Application)
–5.4 CE101: Conducted Emissions, Power Leads, 30 Hz to 10 kHz
–5.5 CE102: Conducted Emissions, Power Leads, 10 kHz to 10 MHz
–5.6 CE106: conducted emissions, antenna terminal, 10 kHz to 40 GHz
–5.7 CS101 : Conducted Susceptibility, Power Leads, 30 Hz to 150 kHz
–5.12 CS114 : Conducted Susceptibility, Bulk Cable Injection, 10 kHz to 200 MHz
–5.13 CS115 : Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
–5.14 CS116 : Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads, 10 kHz to 100 MHz
–5.15 RE101 : Radiated Emissions, Magnetic Field, 30 Hz to 100 kHz
–5.16 RE102 : Radiated Emissions, Electric Field, 10 kHz to 18 GHz
–5.18 RS101 : Radiated Susceptibility, Magnetic Field, 30 Hz to 100 kHz
–5.19 RS103 : Radiated Susceptibility, Electric Field, 2 MHz to 40 GHz |
– CE101 : 30 Hz ～ 10 kHz
– CE102 : 10 kHz ～ 10 MHz
– CE106 : 10 kHz ～ 26.5 GHz
– CS101 : Max. 136 dBuV
(30 Hz ～ 150 kHz)
– CS114 : Max. 109 dBuA
(10 kHz ～ 200 MHz)
– CS115 : 5 A
– CS116 : Max. 10 A
(10 kHz ～ 100 MHz)
– RE101 : 30 Hz ～ 100 kHz
– RE102 : 10 kHz ～ 18 GHz
– RS101 : Max. 180 dBpT
(30 Hz ∼ 100 kHz)
– RS103 : Max. 20 V/m
(2 MHz ∼ 100 MHz)
Max. 200 V/m
(100 MHz ∼ 18 GHz) |
부속시설-1 |
| MIL-STD-461F:2007 |
Department of defense interface standard Requirements for the control of electromagnetic interference characteristics of subsystems and equipment
(Application)
–5.4 CE101: Conducted Emissions, Power Leads, 30 Hz to 10 kHz
–5.5 CE102: Conducted Emissions, Power Leads, 10 kHz to 10 MHz
–5.6 CE106: conducted emissions, antenna terminal, 10 kHz to 40 GHz
–5.7 CS101 : Conducted Susceptibility, Power Leads, 30 Hz to 150 kHz
–5.11 CS106 : Conducted Susceptibility, Transients, Power Leads
–5.13 CS114 : Conducted Susceptibility, Bulk Cable Injection, 4 kHz to 200 MHz
–5.14 CS115 : Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
–5.15 CS116 : Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads, 10 kHz to 100 MHz
–5.16 RE101 : Radiated Emissions, Magnetic Field, 30 Hz to 100 kHz
–5.17 RE102 : Radiated Emissions, Electric Field, 10 kHz to 18 GHz
–5.19 RS101 : Radiated Susceptibility, Magnetic Field, 30 Hz to 100 kHz
–5.20 RS103 : Radiated Susceptibility, Electric field, 2 MHz to 40 GHz |
– CE101 : 30 Hz ～ 10 kHz
– CE102 : 10 kHz ～ 10 MHz
– CE106 : 10 kHz ～ 26.5 GHz
– CS101 : Max. 136 dBuV
(30 Hz ∼ 150 kHz)
– CS106 : 400 V
– CS114 : Max. 109 dBuA
(4 kHz ∼ 200 MHz)
– CS115 : 5 A
– CS116 : Max. 10 A
(10 kHz ∼ 100 MHz)
– RE101 : 30 Hz ～ 100 kHz
– RE102 : 10 kHz ～ 18 GHz
– RS101 : Max. 180 dBpT
(30 Hz ∼ 100 kHz)
– RS103 : Max. 20 V/m
(2 MHz ∼ 100 MHz)
Max. 200 V/m
(100 MHz ∼ 18 GHz) |
부속시설-1 |
| MIL-STD-461G:2015 |
Department of defense interface standard Requirements for the control of electromagnetic interference characteristics of subsystems and equipment
(Application)
–5.4 CE101: Conducted Emissions, Audio Frequency Currents, Power Leads
–5.5 CE102: Conducted Emissions, Radio Frequency Potentials, Power Leads
–5.6 CE106: conducted emissions, antenna port
–5.7 CS101 : Conducted Susceptibility, Power Leads
–5.12 CS114 : Conducted Susceptibility, Bulk Cable Injection
–5.13 CS115 : Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
–5.14 CS116 : Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads
–5.16 CS118 : Conducted Susceptibility, Personnel Borne Electrostatic Discharge
–5.17 RE101 : Radiated Emissions, Magnetic Field
–5.18 RE102 : Radiated Emissions, Electric Field
–5.20 RS101 : Radiated Susceptibility, Magnetic Field
–5.21 RS103 : Radiated Susceptibility, Electric Field |
– CE101 : 30 Hz ～ 10 kHz
– CE102 : 10 kHz ～ 10 MHz
– CE106 : 10 kHz ～ 26.5 GHz
– CS101 : Max. 136 dBuV
(30 Hz ∼ 150 kHz)
– CS114 : Max. 109 dBuA
(4 kHz ∼ 200 MHz)
– CS115 : 5 A
– CS116 : Max. 10 A
(10 kHz ∼ 100 MHz)
– CS118 : ±15 kV
– RE101 : 30 Hz ～ 100 kHz
– RE102 : 10 kHz ～ 18 GHz
– RS101 : Max. 180 dBpT
(30 Hz ∼ 100 kHz)
– RS103 : Max. 20 V/m
(2 MHz ∼ 100 MHz)
Max. 200 V/m
(100 MHz ∼ 18 GHz) |
부속시설-1 |
| REGULATORYGUIDE 1.180:2003 |
GUIDELINES FOR EVALUATING ELECTROMAGNETIC AND RADIO-FREQUENCY INTERFERENCE IN SAFETY-RELATED INSTRUMENTATION AND CONTROL SYSTEMS
(Application)
-3.1 CE101—Conducted Emissions, Low Frequency
-3.2 CE102—Conducted Emissions, High Frequency
-3.3 RE101—Radiated Emissions, Magnetic Field
-3.4 RE102—Radiated Emissions, Electric Field
-4.1.1 CS101—Conducted Susceptibility, Low Frequency
-4.1.2 CS114—Conducted Susceptibility, High Frequency
-4.2 EMI/RFI Conducted Susceptibility Testing—Signal LeadsMIL-STD-461E Conducted Susceptibility Test Methods
-4.3.1 RS101—Radiated Susceptibility, Magnetic Fields
-4.3.2 RS103—Radiated Susceptibility, Electric Fields |
- CE101 : 30 Hz ～ 10 kHz
- CE102 : 10 kHz ～ 2 MHz
- RE101 : 30 Hz ～ 100 kHz
- RE102 : 2 MHz ～ 1 GHz
- CS101 : Max. 136 dBuV
(30 Hz ∼ 150 kHz)
- CS114 : Max. 100 dBuA
(10 kHz ∼ 30 MHz)
- CS115 : 2 A
- CS116 : 5 A
(10 kHz ∼ 100 MHz)
- RS101 : Max. 180 dBpT
(30 Hz ∼ 100 kHz)
- RS103 : 10 V/m
(30 MHz ∼ 1 GHz) |
부속시설-1 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-14 :2023 |
환경시험 - 제2-14부: 시험 - 시험N: 온도변화
7. 시험 Na: 급격한 온도 변화
8. 시험 Nb: 규정된 변화율에 따른 온도 변화 |
(-65 ~ 150) ℃
가혹도 : Max. 10 K/min |
소재지 |
| KS C IEC 60068-2-1:2007 |
환경시험 - 제2-1부: 시험-시험 A: 내한성 시험 |
(-50 ~ 5) ℃ |
소재지 |
| KS C IEC 60068-2-2:2007 |
환경시험 - 제2-2부: 시험-시험B: 내열성시험 |
(30 ~ 125) ℃ |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경 시험 — 제2-30부: 시험 — 시험 Db와 지침: 주기적 내습(12 h+12 h 주기) |
(25 ~ 55) ℃
(45 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-38:2021 |
환경시험 - 제2-38부: 시험-시험 Z/AD: 합성온도/습도 사이클 시험 |
(-10 ~ 65) ℃
(20 ~ 93) % R.H. |
소재지 |
| KS C IEC 61373:2010 |
철도 적용 - 철도차량 장치 - 충격 및 진동시험
10. 충격 시험 조건 |
(18 ~ 30) ms
(30 ~ 300) ㎨ |
소재지 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험 방법 |
(1 ~ 70) Hz
(4.9 ~ 490) ㎨ |
소재지 |
| MIL-STD-810F:2003 |
Department of defense test method standard for environmental engineering considerations and laboratory tests
501.4 High temperature
502.4 Low temperature
503.4 Temperature shock
507.4 Humidity
514.5 Vibration
(Exception) Category 4 - Truck/trailer/tracked-restrained cargo
(Exception) Category 5 - Truck/trailer/tracked-loose Cargo
(Exception) Category 6 - Truck/trailer-large assembly transport |
(30 ~ 120) ℃
(-50 ~ 5) ℃
(-65 ~ 150) ℃
(23 ~ 60) ℃
(30 ~ 95) % R.H.
(5 ~ 2 000) Hz
(0.98 ~ 490) ㎨ |
소재지 |
| MIL-STD-810G:2008 |
Department of defense test method standard for environmental engineering considerations and laboratory tests
501.5 High temperature
502.5 Low temperature
503.5 Temperature shock
507.5 Humidity
514.6 Vibration
(Exception) Category 4 - Truck/Trailer/Tracked- Secured Cargo
(Exception) Category 5 - Truck/Trailer/Tracked-Loose Cargo
(Exception) Category 6 - Truck/Trailer-large assembly transport |
(30 ~ 120) ℃
(-50 ~ 5) ℃
(-65 ~ 150) ℃
(23 ~ 60) ℃
(30 ~ 95) % R.H.
(5 ~ 2 000) Hz
(0.98 ~ 490) ㎨ |
소재지 |
