| ▶ 전자기적합성 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| ANSI C63.4a:2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation |
RE: 30 MHz ∼ 40 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| ANSI/AAMI/IEC 60601-1-2:2014 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| AS CISPR 11:2017 |
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
(Exception) 30 m test method |
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| AS CISPR 14-1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 30 MHz ∼ 1 GHz
CE: 0.15 MHz ∼ 30 MHz
DP: 30 MHz ∼ 300 MHz |
소재지 |
| AS CISPR 15:2017 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
Insertion loss and 3 m, 4 m loop Antenna test method |
RE: 9 kHz ∼ 300 MHz
CE: 9 kHz ∼ 30 MHz |
소재지 |
| AS/NZS 61000-6-3:2012 |
Electromagnetic compatibility (EMC)
– Part 6.3: Generic emission standard
– Residential, commercial and light industry |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| AS/NZS 61000-6-4:2012 |
Electromagnetic compatibility (EMC)
– Part 6.4: Generic standards
– Emission standard for industrial environments |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| AS/NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| CISPR 11:2015+A1:2016+A2:2019 CSV |
Industrial, scientific and medical (ISM) radio-frequency equipment
- Electromagnetic disturbance characteristics
- Limits and methods of measurement
(Exception) 30 m test method |
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| CISPR 14-1:2016 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 30 MHz ∼ 18 GHz
CE: 0.15 MHz ∼ 30 MHz
DP: 30 MHz ∼ 300 MHz |
소재지 |
| CISPR 14-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus
- Part 2: Immunity
- Product family standard |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 230 MHz)
V-DIP:(0 to 100) % |
소재지 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
Insertion loss and 3 m, 4 m loop Antenna test method |
RE: 9 kHz ∼ 300 MHz
CE: 9 kHz ∼ 30 MHz |
소재지 |
| CISPR 24:2015 |
Information technology equipment
- Immunity characteristics
- Limit and methods of measurement |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 1 kV,
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF : 1 A/m
V-DIP:(0 to 100) % |
소재지 |
| CISPR 25:2016 |
Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of on-board receivers
(Exception)
5. Measurement of emissions received by an antenna on the same vehicle
6.5 Radiated emissions from components/modules - TEM cell methods
6.6 Radiated emissions from components/modules – Stripline method |
RE : 150 kHz ∼ 2.5 GHz
CE(Voltage method) :150 kHz ∼ 108 MHz
CE(Current Probe Method) : 150 kHz ∼ 245 MHz |
소재지 |
| CISPR 32:2015+A1:2019 CSV |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV,
Surge: ± 2 kV
CS: 3 V/m
(0.15 MHz ∼ 30 MHz)
MF : 1 A/m
V-DIP:(0 to 100) % |
소재지 |
| ECE R-10-05:2014 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
(Exception)
Annex 4 - Method of measurement of radiated broadband electromagnetic emissions form vehicles
Annex 5 - Method of measurement of radiated narrowband electromagnetic emissions from vehicles
Annex 6 - Method of testing for immunity of vehicles to electromagnetic radiation
Annex 9 - Appendix 1 800 mm Stripline testing
Annex 9 - Appendix 2 TEM cell Testing
Annex11 Method(s) of testing for emission of harmonics generated on AC power lines from vehicle
Annex 12 Method(s) of testing for emission of voltage changes, voltage fluctuations and flicker on AC power lines from vehicle
Annex 13 Method(s) of testing for emission of radiofrequency conducted disturbances on AC or DC power lines from vehicles
Annex 14 Method(s) of testing for emission of radiofrequency conducted disturbances on network and telecommunication access from vehicles
Annex 15 Method of testing for immunity of vehicles to electrical fast transient/burst disturbances conducted along AC and DC power lines
Annex 16 Method of testing for immunity of vehicles to surges conducted along AC and DC power lines |
RE : 30 MHz ∼ 1 GHz
ALSE : 80 MHz ∼ 2 GHz
BCI : 20 MHz ∼ 400 MHz
CTI : Pulse 1, 2a, 2b, 3a, 3b, 4
CTE : 12 V, 24 V SystemCE(AC, DC Power) :
(0.15 ∼ 30) MHz
CE(TEL) :
(0.15 ∼ 30) MHz
Harmonic Current Emission: 16 A
Voltage Fluctuation and Flicker: 16 A
Electrical Fast Transients/ Burst: ± 2 kV
Surge Transient: ± 2 kV |
소재지 |
| ECE R-97:2001 |
Uniform provisions concerning the approval for vehicle alarm systems (VAS) and of motor vehicles with regard to their alarm systems (AS) |
RE : 30 MHz ∼ 1 GHz
ALSE : 80 MHz ∼ 2 GHz
BCI : 20 MHz ∼ 400 MHz
CTI : Pulse 1, 2a, 2b, 3a, 3b, 4
CTE : 12 V, 24 V System |
소재지 |
| EN 301 489-17:2017 |
Electromagnetic compatibility and Radio spectrum Matters (ERM);Electro Magnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems
(Exception)
9.6(Vehicular Transients) |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 301 489-19:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 19: Specific conditions for Receive Only MobileEarth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 301 489-1:2017 |
Electromagnetic compatibility and Radio spectrum Matters(ERM); Electro Magnetic Compatibility(EMC) standard for radio equipment and services; Part 1: Common technical requirements |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 301 489-34:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 301 489-3:2017 |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 301 489-9:2017 |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 50121-1:2017 |
Railway applications - Electromagnetic compatibility - Part 1: General |
RE: 30 MHz - 6 GHz
CE: 150 kHz - 30 MHz
ESD: ± 8 kV
RS: Max 20 V/m
(80 MHz - 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: 10 V
(150 kHz - 80 MHz)
V-DIP: max 100 % |
소재지 |
| EN 50121-3-2:2016 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz - 30 MHz
ESD: ± 8 kV
RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V
(150 kHz ~ 80 MHz)
M/F: 30 A/m |
소재지 |
| EN 50121-4:2016 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz
ESD: ± 8 kV
RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V
(150 kHz ~ 80 MHz)
M/F: 300 A/m
PLUSE M/F: 300 A/m |
소재지 |
| EN 50121-5:2017 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz
ESD: ± 8 kV
RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V
(150 kHz ~ 80 MHz)
M/F: 300 A/m
PLUSE M/F: 300 A/m |
소재지 |
| EN 50130-4:2011 |
Alarm systems
- Part 4 : Electromagnetic compatibility
- Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
Variations:
Umax= Unom + 10 %
Umax= Unom - 15 %
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 ∼ 100) MHz
V-DIP:(0 to 100) % |
소재지 |
| EN 50155:2017 |
Railway applications - Electronic equipment used on rolling stock |
ESD: ± 8 kV
RS: Max 10 V/m (80 MHz - 3 GHz)
EFT: ± 1 kV
SURGE: ± 2 kV
CS: Max 3 V (150 kHz - 230 MHz)
V-DIP: max 100 %
MF : 30 A/m |
소재지 |
| EN 50270:2015 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
RE: 30 MHz ∼ 1 GHz
CE: 0.15 MHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 55011:2016+A2:2021 |
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
(Exception) 30 m test method |
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| EN 55024:2010+A1:2015 |
Information technology equipment
- Immunity characteristics
- Limit and methods of measurement |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 1 kV,
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 230 MHz)
MF : 1 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 55032:2015+A1:2020 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: 3 V/m
(80 MHz ~ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: 3 V/m
(0.15 MHz ~ 80 MHz)
MF : 1 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-1-2:2007 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 6 GHz
CE: 9 kHz ∼ 30 MHz
ESD: ± 8 kV
RS: Max 10 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-1-2:2015 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-1-2:2015/A1:2021 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-10:2015+A1:2016 |
Medical electrical equipment
- Part 2-10: Particular requirements for the basic safety and essential performance of nerve and musclestimulators
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-18:2015 |
Medical electrical equipment
- Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-19:2009+A1:2016 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-24:2015 |
Medical electrical equipment
- Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-25:2015 |
Medical electrical equipment
- Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-27:2014 |
Medical electrical equipment
- Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-2:2009+A11:2011 |
Medical electrical equipment-
- Part 2-2 : Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-2:2018 |
Medical electrical equipment-
- Part 2-2 : Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- 202 Electromagnetic Disturbance
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-34:2014 |
Medical electrical equipment
- Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-37:2008+A1:2015 |
Medical electrical equipment
- Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-44:2009+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirementsfor the basic safety and essential performance of X-ray equipmentfor computed tomography
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirementsfor basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-49:2015 |
Medical electrical equipment
- Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-5:2015 |
Medical electrical equipment – Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-62:2015 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-63:2015 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 60601-2-65:2013 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 61000-3-2:2019 |
Electromagnetic compatibility (EMC)
- Part 3-2: Limits
- Limits for harmonic current emission (equipment input current ≤16A per phase) |
Single Phase ≤ 16 A |
소재지 |
| EN 61000-3-3:2013+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits
- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
Single Phase ≤ 16 A |
소재지 |
| EN 61000-4-2:2009 |
Testing and measurement techniques - Electrostatic discharge immunity test |
Max ± 15 kV |
소재지 |
| EN 61000-4-4:2012 |
Testing and measurement techniques
- Electrical fast transient/burst immunity test |
Max ± 4 kV |
소재지 |
| EN 61000-4-5:2014 |
Testing and measurement techniques
- Surge immunity test |
Max ± 5 kV |
소재지 |
| EN 61000-4-5:2014/A1:2017 |
Testing and measurement techniques
- Surge immunity test |
Max ± 5 kV |
소재지 |
| EN 61000-4-8:2010 |
Testing and measurement techniques - Power frequency magnetic field immunity test |
Max 30 A/m |
소재지 |
| EN 61204-3:2018 |
Low-voltage power supplies, d.c. output
- Part 3: Electromagnetic compatibility (EMC) |
RE: 30 MHz ∼ 1 GHz
CE: (0.15 ∼ 30) MHz
DP: (30 ∼ 300) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements
- Part 1 : General requirements |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements
- Part 2-1 : Particular requirements
- Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements - Part 2-2: Particular requirements
- Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements
- Part 2-3 : Particular requirements
- Test configurations, operational conditions
and performance criteria for transducers with
integrated or remote signal conditioning |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use
– EMC requirements
– Part 2-4: Particular requirements Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use
– EMC requirements
– Part 2-5: Particular requirements
– Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use
– EMC requirements
– Part 2-6: Particular requirements
- In vitro diagnostic (IVD) medical equipment |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100 ) % |
소재지 |
| EN 61547:2009 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 62040-2:2018 |
Uninterruptible power systems (UPS)
–Part 2:Electromagnetic compatibility(EMC) requirements |
RE: 30 MHz ∼ 1 GHz
CE: 0.15 MHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz) |
소재지 |
| EN 80601-2-30:2010+A1:2015 |
Medical electrical equipment
- Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN 80601-2-60:2015 |
Medical electrical equipment
-Part 2-60:Particular requirements for the basic safety and essential performance of dental equipment
-201.17 Electromagnetic compatibility
-Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE : 9 kHz ∼ 6 GHz
CE : 9 kHz ∼ 30 MHz
DP : 30 MHz ~ 300 MHz |
소재지 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 2: Immunity
- Product family standard |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ~ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ~ 230 MHz)
V-DIP:(0 to 100) % |
소재지 |
| EN IEC 55015:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
Insertion loss and 3 m, 4 m loop Antenna test method |
RE: 9 kHz ∼ 300 MHz
CE: 9 kHz ∼ 30 MHz |
소재지 |
| EN IEC 61000-3-2:2019/A1:2021 |
Electromagnetic compatibility (EMC)
- Part 3-2: Limits
- Limits for harmonic current emission (equipment input current ≤16A per phase) |
Changed(Table 2 - Limits for Class C equipment) |
소재지 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
V-DIP : max 16 A, 100 % |
소재지 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
(80 ∼ 6 000) MHz
Max 20 V/m |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
(0.15 MHz ∼ 230 MHz)
Max 10 V |
소재지 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for equipment in residential environments |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| FCC PART15:2019 |
Radio Frequency Devices
-Subpart B-Unintentional Radiators |
RE: 30 MHz ∼ 40 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| FCC PART18:2018 |
Industrial, Scientific and Medical Equipment |
RE : 9 kHz ∼ 40 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| ICES-001 Issue4:2014 |
Spectrum Management and Telecommunications Interference - Causing Equipment Standard Industrial, scientific and medical radio-frequency Generators |
RE : 30 MHz ∼ 18 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| ICES-003 Issue6:2016 |
Spectrum Management and Telecommunications Interference - Causing Equipment Standard Digital Apparatus |
RE : 30 MHz ∼ 18 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| IEC 60601-1-2:2007 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 6 GHz
CE: 9 kHz ∼ 30 MHz
ESD: ± 8 kV
RS: Max 10 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-1-2:2014 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-1-2:2014/A1:2020 |
Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance
- Collateral standard : Electromagnetic compatibility
- Requirements and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment
- Part 2-10: Particular requirements for the basic safety and essential performance of nerve and musclestimulators
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-18:2009 |
Medical electrical equipment
- Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-19:2009+A1:2016 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-24:2012 |
Medical electrical equipment
- Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-25:2011 |
Medical electrical equipment
- Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-27:2011 |
Medical electrical equipment
- Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-2:2009 |
Medical electrical equipment-
- Part 2-2 : Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-2:2017 |
Medical electrical equipment-
- Part 2-2 : Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- 202 Electromagnetic Disturbance
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-34:2011 |
Medical electrical equipment
- Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-37:2015 |
Medical electrical equipment
- Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medicaldiagnostic and monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-44:2016 |
Medical electrical equipment - Part 2-44: Particular requirementsfor the basic safety and essential performance of X-ray equipmentfor computed tomography
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-45:2015 |
Medical electrical equipment - Part 2-45: Particular requirementsfor basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-49:2011 |
Medical electrical equipment
- Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-54:2009+A1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-54:2009+A1:2015+A2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-5:2009 |
Medical electrical equipment – Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-62:2013 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-63:2012+A1:2017 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 60601-2-65:2017 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 61000-3-2:2018 |
Electromagnetic compatibility (EMC)
- Part 3-2: Limits
- Limits for harmonic current emission (equipment input current ≤16A per phase) |
Single Phase ≤ 16 A |
소재지 |
| IEC 61000-3-3:2013 |
Electromagnetic compatibility (EMC)
- Part 3-3: Limits
- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
Single Phase ≤ 16 A |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
V-DIP : max 16 A, 100 % |
소재지 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
Max ± 15 Kv |
소재지 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency electromagnetic field immunity test |
(80 ∼ 6 000) MHz
Max 20 V/m |
소재지 |
| IEC 61000-4-4:2012 |
Testing and measurement techniques
- Electrical fast transient/burst immunity test |
Max ± 4 kV |
소재지 |
| IEC 61000-4-5:2014 |
Testing and measurement techniques
- Surge immunity test |
Max ± 5 kV |
소재지 |
| IEC 61000-4-5:2014/A1:2017 |
Testing and measurement techniques
- Surge immunity test |
Max ± 5 kV |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
(0.15 MHz ∼ 230 MHz)
Max 10 V |
소재지 |
| IEC 61000-4-8:2009 |
Testing and measurement techniques - Power frequency magnetic field immunity test |
Max 30 A/m |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards
- Immunity for residential, commercial and light - industrial environments |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC)
- Part 6-2: Generic standards
- Immunity standard for industrial environments |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 61000-6-3:2006+A1:2010 |
Electromagnetic compatibility (EMC)
– Part 6-3: Generic standards
– Emission standard for residential, commercial and light-industrial environments |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC)
– Part 6-4: Generic standards
– Emission standard for industrial environments |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz |
소재지 |
| IEC 61204-3:2016 |
Low-voltage power supplies, d.c. output
- Part 3: Electromagnetic compatibility (EMC) |
RE: 30 MHz ∼ 1 GHz
CE: (0.15 ∼ 30) MHz
DP: (30 ∼ 300) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements
- Part 1 : General requirements |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 61326-2-1:2012 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements
- Part 2-1 : Particular requirements
- Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 61326-2-3:2012 |
Electrical equipment for measurement, control and laboratory use
- EMC requirements
- Part 2-3 : Particular requirements
- Test configurations, operational conditions
and performance criteria for transducers with
integrated or remote signal conditioning |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| IEC 61326-2-4:2012 |
Electrical equipment for measurement, control and laboratory use
– EMC requirements
– Part 2-4: Particular requirements Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use
– EMC requirements
– Part 2-5: Particular requirements
– Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
RE: 30 MHz ～ 6 GHz
CE: 150 kHz ～ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ～ 2.7 GHz 10 V/m
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz ～ 80 MHz 10 V
V-DIP: max 100 %
M/F: 30 A/m |
소재지 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control and laboratory use
– EMC requirements
– Part 2-6: Particular requirements
- In vitro diagnostic (IVD) medical equipment |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 61547:2009 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 62040-2:2016 |
Uninterruptible power systems (UPS)
– Part 2: Electromagnetic compatibility (EMC) requirements |
RE: 30 MHz ∼ 1 GHz
CE: 0.15 MHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz) |
소재지 |
| IEC 62236-1:2018 |
Railway applications - Electromagnetic compatibility - Part 1: General |
RE: 30 MHz ~ 6 GHz
CE: 150 kHz ~ 30 MHz
ESD: ± 8 kV RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV Surge: ± 2 Kv
CS: 10 V
(150 kHz - 80 MHz)
V-DIP: max 100 % |
소재지 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz
ESD: ± 8 kV
RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V
(150 kV ~ 80 MHz) |
소재지 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz
ESD: ± 8 kV RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V
(150 kHz ~ 80 MHz)
M/F: 300 A/m
PLUSE M/F: 300 A/m |
소재지 |
| IEC 80601-2-30:2009+A1:2013 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated type non-invasive sphygmomanometers
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 80601-2-30:2018 |
Medical electrical equipment
- Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 80601-2-49:2018 |
Medical electrical equipment
- Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| IEC 80601-2-60:2019 |
Medical electrical equipment
-Part 2-60:Particular requirements for the basic safety and essential performance of dental equipment
-201.17 Electromagnetic compatibility
-Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| ISO 10605:2008 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge
(Exception)10. Vehicle test method |
(± 2 ∼ ± 25) kV |
소재지 |
| ISO 10605:2008+A1:2014 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
(± 2 ∼ ± 25) kV |
소재지 |
| ISO 11452-1:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
General |
소재지 |
| ISO 11452-2:2004 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
80 MHz ∼ 3.2 GHz |
소재지 |
| ISO 11452-4:2011 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
Part 4: Harness excitation methods |
1 MHz ∼ 400 MHz |
소재지 |
| ISO 16750-1:2006 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment Part 1: General |
General |
소재지 |
| ISO 16750-2:2012 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads |
12 V, 24 V System |
소재지 |
| ISO 7637-1:2015 |
Road vehicles - Electrical disturbances from conduction and coupling Part 1: Definitions and general considerations |
General |
소재지 |
| ISO 7637-2:2004+A1:2008 |
Road vehicles - Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
12 V, 24 V System |
소재지 |
| ISO 7637-2:2011 |
Road vehicles - Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
12 V, 24 V System |
소재지 |
| ISO 7637-3:2007 |
Road vehicles - Electrical disturbances from conduction and coupling Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
12 V, 24 V, 42 V System |
소재지 |
| ISO 80601-2-61:2011 |
Medical electrical equipment
- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| ISO 80601-2-61:2017 |
Medical electrical equipment
- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
- 202 Electromagnetic compatibility
- Requirement and tests |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| KS C 9040-2:2017 |
무정전전원장치(UPS) 제2부 전자기적합성(EMC) 요구사항 |
CE : 150 kHz ~ 30 MHz
RE : 10 kHz ~ 1 GHz
ESD : 8 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : 2 kV
Surge : 2 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 30 A/m
V-Dip : 정격전류 16 A |
소재지 |
| KS C 9547:2020 |
일반 조명기기 - 전자파적합성 (EMC) 내성 요구사항 |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 1 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| KS C 9610-3-2:2020 |
전자파적합성(EMC) - 제3-2부: 허용기준 - 고조파 전류의 허용기준(상당 입력 전류 16A 이하 기기) |
상당 입력 전류 ≤ 16 A |
소재지 |
| KS C 9610-3-3:2020 |
전자파적합성(EMC) - 제3-3부: 허용기준 - 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준(상당 16A 이하 기기) |
Single Phase ≤ 16 A |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC)-제4-11부:
시험 및 측정 기술 – 전압 강하,순간 정전,전압 변동 내성 시험 |
V-DIP : max 16 A, 100 % |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) — 제4-2부: 시험 및 측정기술 — 정전기 방전 내성 시험 |
Max ± 15 kV |
소재지 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) — 제4-3부: 시험 및 측정기술 — 방사성 RF 전자기장 내성 시험 |
(80 ∼ 6 000) MHz
Max 20 V/m |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) - 제4-4부 :
시험 및 측정기술 전기적 빠른 과도현상, 버스트 내성시험 |
Max ± 4 kV |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) — 제4—5부: 시험 및 측정기술 — 서지 내성 시험 |
Max ± 5 kV |
소재지 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부 :
시험 및 측정기술 전도성 RF 전자기장 내성 시험 |
(0.15 MHz ∼ 230 MHz)
Max 10 V |
소재지 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) - 제4-8부 :
시험 및 측정기술 전원 주파수 자기장 내성 시험 |
Max 30 A/m |
소재지 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) — 제6-1부: 일반표준 — 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) — 제6-2부: 일반표준 — 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 10 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) —제6-3부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) — 제6-4부: 일반기준 — 산업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz |
소재지 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
(제외항목) 30 m test method |
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| KS C 9814-1:2022 |
전자기적합성(EMC) - 가정용 전기기기, 전동 공구 및 유사기기의 요구사항 – 제1부: 방출 |
RE: 9 kHz ∼ 6GHz
CE: 0.15 MHz ∼ 30 MHz
DP: 30 MHz ∼ 300 MHz |
소재지 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동 공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 230 MHz)
V-DIP:(0 to 100) % |
소재지 |
| KS C 9815:2023 |
조명기기 및 유사기기의 무선 방해 특성의 허용기준과 측정방법
(Exception)
Insertion loss and 3m,4m loop Antenna test method |
RE:9 kHz ~ 1 000 MHz
CE:9 kHz ~ 30 MHz |
소재지 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 장해방지 시험방법 |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| KS C 9835:2019 |
멀티미디어기기 전자파 내성 시험방법 |
ESD: Air ± 8 kV
Contact ± 4 kV
RS: 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV,
Surge: ± 2 kV
CS: 3 V/m
(0.15 MHz ∼ 80 MHz)
MF : 1 A/m
V-DIP:(0 to 100) % |
소재지 |
| KS C 9990:2017 |
자동차 및 내연기관 구동기기류 전자파적합성(EMC) 시험방법
(Exception)
TEM cell,스트립선로 |
RE: 30 MHz ~ 1 GHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System
RI: 20 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz |
소재지 |
| KS C CISPR 22:2011 |
정보기술기기 – 무선 방해 특성 - 측정 한계값과 측정 방법 |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| KS C IEC 60601-1-2:2020 |
의료용 전기기기 – 제1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항 – 보조표준：전자파 장해-요구사항 및 시험 (제외항목) 8.11 항 근접자기장 시험 |
RE: 9 kHz ∼ 18 GHz
CE: 9 kHz ∼ 30 MHz
ESD: Air ± 15 kV
Contact ± 8 kV
RS: Max 28 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 30 A/m
V-DIP:(0 to 100) % |
소재지 |
| KS C IEC 62236-3-2:2018 |
철도 적용-전자기 적합성-제3-2부:철도 차량-기기 |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz
ESD: ± 8 kV
RS: Max 20 V/m
(80 MHz ~ 2.5 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V
(150 kV ~ 80 MHz) |
소재지 |
| KS C IEC 62236-4:2018 |
철도용 전기자기적합성 - 제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE : 9 kHz - 30 MHz
RE : 9 kHz to 18 GHz
ESD : ± 8 Kv
RS : Max 20 V/m
(80 MHz - 6 GHz)
EFT : ± 4 kV
SURGE : ± 4 kV
CS : Max 15 V
(150 kHz - 230 MHz)
M/F : 0 to 300 A/m
PMF: 0 to 300 A/m
V-DIP : (0 to 100) % |
소재지 |
| KS X 3124:2020 |
무선기기의 공통 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| KS X 3125:2020 |
특정 소출력 무선기기 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| KS X 3126:2020 |
무선데이터 통신시스템용 특정 소출력 무선기기 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| KS X 3130:2014 |
음성 및 음향신호 전송용 특정소출력 무선기기에 대한 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz
CE: (0.15 ∼ 30) MHz
ESD: Air ± 8 kV
Contact ± 4 kV
RS: Max 3 V/m
(80 MHz ∼ 6 GHz)
EFT: ± 1 kV
Surge: ± 2 kV
CS: Max 3 V/m
(0.15 MHz ∼ 80 MHz)
V-DIP:(0 to 100) % |
소재지 |
| KS X 3143:2020 |
가정용 무선 전력 전송기기 전자파장해 시험방법 |
RE: 9 kHz ∼ 1 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| SAE J1113-11:2007 |
Immunity to Conducted Transients on Power Leads |
12 V System : Pulse 1a, 1b, 2a, 2b, 3a, 3b, 4, 5a, 5b24 V System : Pulse 1c, 2a, 2b, 3a, 3b, 4, 5a, 5b |
소재지 |
| SAE J1113-12:2006 |
Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than Supply Lines
(Exception)
3.4 Chattering Relay |
CCC :Pulse A,
BDCC :Pulse C,
DICC :Pulse C, D |
소재지 |
| SAE J1113-13:2004 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge |
(± 4 ∼ ± 25) kV |
소재지 |
| SAE J1113-41:2006 |
Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protectionof Receivers Used On Board Vehicles
(Exception)
9. Radiated Emissions-Component/ Module;Tem Cell Method |
CE(Power Line) :
150 kHz ∼ 108 MHz
CE(Signal Line) :
150 kHz ∼ 108 MHz
RE : 150 kHz ∼ 960 MHz |
소재지 |
| SAE J1113-42:2006 |
Electromagnetic Compatibility-ComponentTest ProcedurePart 42-Conducted Transient Emissions |
12 V, 24 V System |
소재지 |
| SAE J1113-4:2004 |
Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method |
1 MHz ∼ 400 MHz |
소재지 |
| TL 81000:2016 |
VOLKSWAGEN - Electromagnetic compatibility of Automotive Electronic Components
(Exception)
3.2.3 Antenna
3.2.4 Stripline
3.2.5 Mobile Radio test
3.2.6 Magnetic field test
3.3.7 Stripline (SL test, optional)
3.3.9 Magnetic field coil 12 cm
3.3.11 Isotropic magnetic field4. Vehcle level |
ESD : (± 2 ∼ ± 15) kV
BCI : 100 kHz ∼ 400 MHz
AN test : 100 kHz ∼ 108 MHz
RE test : 9 kHz ∼ 6 GHz
CP test : 9 kHz ∼ 108 MHz
MF 60cm : 9 kHz ~ 30 MHz
Pulse interference on supply lines : 12 V, 24 V, 42 V/48 V System
(Pulse 1, 2, 3a, 3b, 6)
Pulse interference on sensor cables CCC : Pulse 3a, 3b ICC : Pulse 1, 2 |
소재지 |
| TL 82066:2006 |
VOLKSWAHGEN AG - Electromagnetic compatibility of Automotive Electronic Components (Conducted Interference) |
Pulse 1, 2, 3a, 3b, 5b, 6 |
소재지 |
| TL 82166:2011 |
VOLKSWAGEN - Electromagnetic compatibility of Automotive Electronic Components (RadiatedInterferences)
(Exception)
6.2 Antenna Method
6.3 Stripline
7. Full vehicle testing |
BCI : 100 kHz ∼ 400 MHz |
소재지 |
| TL 82366:2008 |
VOLKSWAGEN AG - Electromagnetic compatibility of Automotive Electronic Components (Coupled Interferences on Sensor Cables) |
CCC : Pulse 3a, 3b
ICC : Pulse 1, 2 |
소재지 |
| TL 82466:2009 |
VOLKSWAGEN - Electromagnetic compatibility of Automotive Electronic Components (Immunity to Electrostatic Discharge (ESD))
(Exception)8. Test at vehicle level |
ESD : (± 2 ∼ ± 15) kV |
소재지 |
| TL 965:2012 |
VOLKSWAGEN - Interference EmissionRequirement
(Exception)
4. HF emissions - vehicle measurement(vehicle test)
5.5 HF emissions–capacitive voltage measurement(CV test, optional)
5.7 HF emissions - measurements with TEMcell (TEM test, optional)
5.8 HF emissions - measurements with thestripline (SL test, optional) |
AN test :
100 kHz ∼ 108 MHz
RE test :
100 kHz ∼ 2 690 MHz
CV test :
100 kHz ∼ 30 MHz
CP test :
30 MHz ∼ 108 MHz |
소재지 |
| TS-0000048-06:2015 |
TESLA MOTORS, Inc- EMC Requirements for Electrical and ElectronicComponents Including Motors
(Exception)
17.RF Immunity-Antenna Irradiation(ALSE With a Ground Plane) Test With Or Without Remote Ground |
AN-TEST : 100 kHz ∼ 174 MHz
CP-TEST: 100 kHz ∼ 174 MHz
RE-TEST(ALSE METHOD) : 100 kHz ∼ 2 690 MHz
CTE-TEST : 12 V System
BCI : 100 kHz ∼ 400 MHz
TSUP : Pulse 1a, 1b, 2a, 3a, 3b
TOL(CCC) : Pulse a, b
TOL(ICC) : Pulse a, b
ESDH-TEST : (± 2 ∼ ± 15) kV
ESDI-TEST : (± 4 ∼ ± 25) kV
ESDD-TEST : (± 4 ∼ ± 25) kV |
소재지 |
| VCCI 32-1:2016 |
Rules for voluntary control measures – Technical Requirements: VCCI-CISPR 32: 2016 |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz |
소재지 |
| 고용노동부 고시 제2008-118호(2008.12.31.) |
의무 안전인증대상 기계․기구 등이 아닌 기계․기구 등의 안전인증 규정
(공통기술기준 S2-W-5) |
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
M/F: 30 A/m
V-DIP: (0 ∼ 100) % |
소재지 |
| 고용노동부 고시 제2017-52호(2017.10.11.) |
위험기계·기구 자율안전확인
(공통기술기준 S2-W-5) |
RE : 30 MHz ∼ 6 GHz
CE : 0.15 MHz ∼ 30 MHz
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
M/F: 30 A/m
V-DIP: (0 ∼ 100) % |
소재지 |
| 식품의약품안전처 고시 제2017-45호 (2017.05.24.) |
의료기기의 전자파안전에 관한 공통기준규격 |
RE: 30 MHz ∼ 6 GHz
CE: 0.15 MHz ∼ 30 MHz
ESD: Air ± 8 kV
Contact ± 6 kV
RS: Max 10 V/m
(80 MHz ∼ 3 GHz)
EFT: ± 2 kV
Surge: ± 2 kV
CS: Max 10 V/m
(0.15 MHz ∼ 80 MHz)
MF: 3 A/m
V-DIP:(0 to 100) % |
소재지 |
