| ▶ 가정용 전기기기 |
| EN 62368-1:2014 +A11:2017 |
Audio/video, information and communication technology equipment - Part1: Safety requirements
(Exception)
5.4.1.10 Vicat test B 50
5.4.3.3 CTI test (Tacking index per IEC 60112)
5.4.4.6.5 Mandrel test
5.6.4.1 (Annex R) Source with atleast 1 500 A short circuit 10 Radiations
Annex G.7 Main supply cord for IEC 60227
Annex G.13.6.2 Abrasion resistance test
Annex G15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.6.2 Leakage current
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 5 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 42 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| IEC 60065:2014 |
Audio, video and similar electronic apparatus - Safety requirements
(Exception)
4.3.12 Citizen’s Band apparatus test
6.2 Laser Radiation
12.3 Remote control devices held in hand
13.3.4 Measurement of transient voltages
13.4 Creepage distances - only subclause of CTI value
14.2 Capacitor and RC-units
14.5 Protective devices
14.6 Switches
16 External flexible cords
18 Mechanical strength of picture tubes and protection against electric shock
Annex A Splash treatment
Annex H Insulated winding wires for use without interleaved insulation |
Input: 600 V(max), 20 A(max)
Heating: 200 ℃
Withstanding voltage: 3 kV
stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| KC 60335-2-23:2022 |
가정용 및 이와 유사한 전기기기의 안정성 – 제2-23부: 피부손질 또는 모발손질용 전기기기의 개별요구사항
(제외항목)
6.2 추가: 핸드 드라이어기에 대한 IPX1시험
11.101 전원코드 회전이음쇠 시험
19 이상운전
23.3 추가: 전선 구부림 시험 5 000회
6.2 방수시험
15.1.2 수지형 기기에 대한 방수 시험
19.11.4 스위치 (꺼짐상태) 시험
21.2 고체 절연물에 대한 강도시험
22.46 소프트웨어 시험
25 전원 접속 및 외부 유연성 코드에 대한 시험
부속서 B 충전식 전지를 전원으로 사용하는 기기
부속서 F 캐패시터
부속서 H 스위치
부속서 J 피복된 인쇄 회로 기판
부속서 N 내트래킹시험
부속서 R 소프트웨어평가
부속서 T 비금속 재료에 대한 UV-C 방사 효과 |
입력: 최대 600 V, 최대 20 A
온도: 200 ℃
내전압: 3 kV
경사: 20°
장력: 250 N
습도: 30 ℃, 95 % R.H.
충격: 0.5 J |
소재지 |
| IEC 60335-2-23:2016 +A1:2019 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
(Exception)
6.2 Addition:Hand dryers shall be at least IPX1
11.101 Supply cord
19 Abnormal operation
23.3 Addition: The number of fixings for conductors that are only flexed when the appliance is stored is 5 000
6.2 Water test
15.1.2 IP test for Hand-held appliances
19.11.4 Switch (offmode) test
21.2 Solid insulation sufficient strength test of accessible
22.46 Software test
25 Supply connection and external flexible cords
Annex B Appliances powered by rechargeable batteries
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 0.5 J |
소재지 |
| IEC 60335-2-23:2003 +A1:2008 +A2:2012 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
(Exception)
6.2 Addition:Hand dryers shall be at least IPX1
11.101 Supply cord
19 Abnormal operation
23.3 Addition: The number of fixings for conductors that are only flexed when the appliance is stored is 5 000
6.2 Water test
15.1.2 IP test for Hand-held appliances
19.11.4 Switch (offmode) test
21.2 Solid insulation sufficient strength test of accessible
22.46 Software test
25 Supply connection and external flexible cords
Annex B Appliances powered by rechargeable batteries
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 0.5 J |
소재지 |
| EN 60335-2-23:2003 +A1:2008 +A11:2010 +A2:2015 |
Household and similar electrical appliances - Safety - Part 2-23 : particular requirements for appliances for skin or hair care
(Exception)
6.2 Addition: Hand dryers shall be at least IPX1
11.101 Supply cord
19 Abnormal operation
23.3 Addition: The number of fixings for conductors that are only flexed when the appliance is stored is 5 000
6.2 Water test
15.1.2 IP test for Hand-held appliances
19.11.4 Switch (offmode) test
21.2 Solid insulation sufficient strength test of accessible
22.46 Software test
25 Supply connection and external flexible cords
Annex B Appliances powered by rechargeable batteries
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 0.5 J |
소재지 |
| KC 60335-1:2022 |
가정용 및 이와 유사한 전기기기의 안정성 - 제1부: 일반 요구 사항
(제외항목)
19.9 전동기에 대한 과부하 운전시험
22.16 자동식 코드릴 시험
22.32 부가절연 및 강화 절연시험 (산소용기시험)
23.3 통상사용시험 (코드구부림시험)
24 부품
29.2 재질에 오염등급 – 비교트래킹 CTI 시험
31 내부식성 시험
32 방사선, 유독성 및 이와 유사한 위험성
6.2 방수 시험
15.1.2 수지형 기기에 대한 방수시험
19.11.4 스위치 (꺼짐상태) 시험
21.2 고체절연물에 대한 강도시험
22.46 소프트웨어 시험
25 전원 접속 및 외부 유연성 코드에 대한 시험
부속서 B 충전식 전지를 전원으로 사용하는 기기
부속서 F 캐패시터
부속서 H 스위치
부속서 J 피복된 인쇄회로기판
부속서 N 내트래킹 시험
부속서 R 소프트웨어 평가
부속서 T 비금속 재료에 대한 UV-C 방사 효과 |
입력: 최대600 V, 최대 20 A
온도: 200 ℃
내전압: 3 kV
경사: 20°
장력: 250 N
습도: 30 ℃, 95 % R.H.
충격: 0.5 J |
소재지 |
| IEC 60335-1:2020 |
Household and similar electrical appliances - Safety - Part 1: General requirements
(Exception)
19.9 Running overload test
22.16 Automatic cord reels
22.32 Supplementary insulation and reinforced insulation
23.3 User maintenance
24 Components
29.2 materials group and the pollution degree - only sub clause of CTI value
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
6.2 Water test
15.1.2 IP test for Hand-held appliances
19.11.4 Switch (offmode) test
21.2 Solid insulation sufficient strength test of accessible
22.46 Software test
25 Supply connection and external flexible cords Annex B Appliances powered by rechargeable batteries
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 0.5 J |
소재지 |
| IEC 60335-1:2010 +A1:2013 +A2:2016 |
Household and similar electrical appliances - Safety - Part 1: General requirements
(Exception)
19.9 Running overload test
22.16 Automatic cord reels
22.32 Supplementary insulation and reinforced insulation
23.3 User maintenance
24 Components
29.2 materials group and the pollution degree - only sub clause of CTI value
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
6.2 Water test
15.1.2 IP test for Hand-held appliances
19.11.4 Switch (offmode) test
21.2 Solid insulation sufficient strength test of accessible
22.46 Software test
25 Supply connection and external flexible cords Annex B Appliances powered by rechargeable batteries
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 0.5 J |
소재지 |
| EN 60335-1:2012 +A1:2019 +A2:2019 +A11:2014 +A12:2017 +A13:2017 +A14:2019 +A15:2021 |
Household and similar electrical appliances - Safety - Part 1: General requirements
(Exception)
19.9 Running overload test
22.16 Automatic cord reels
22.32 Supplementary insulation and reinforced insulation
23.3 User maintenance
24 Components
29.2 materials group and the pollution degree - only sub clause of CTI value
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
6.2 Water test
15.1.2 IP test for Hand-held appliances
19.11.4 Switch (offmode) test
21.2 Solid insulation sufficient strength test of accessible
22.46 Software test
25 Supply connection and external flexible cords Annex B Appliances powered by rechargeable batteries
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 0.5 J |
소재지 |
| IEC 60950-1:2005 +A1:2009 +A2:2013 |
Information technology equipment - Safety - Part 1: General requirements
(Exception)
2.10.4 Creepage distances - only subclause of CTI value
2.10.8.4 Abrasion resistance test
3.2.5.1 AC power supply cords
4.2.8 Cathode ray tubes
4.3.12 Flammable liquids
4.3.13.3 Effect of ultraviolet (UV) radiation on materials
4.3.13.4 Human exposure to ultraviolet (UV) radiation
4.3.15 Lasers (including LEDs) |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 3 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 30 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| IEC 62368-3:2017 |
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports |
Input: 300 V d.c.(max), 11 A(Max) |
소재지 |
| EN IEC 62368-3: 2020 |
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports |
Input: 300 V d.c.(max), 11 A(Max) |
소재지 |
| KC 62368-1:2025 |
오디오/비디오및정보통신기술기기제1부: 안전요구사항
(제외항목)
5.4.1.5.3 스크래치 시험 (Steel pin)
5.4.1.10 ISO 306에 따른 비카 시험 B50
5.4.3.3 CTI 시험 (IEC 60112에 따른 내트래킹)
5.4.4.6.5 맨드렐 시험
5.6.4.1 (부속서 R) 제한 단락 시험 (1 500 A)
10 방사
부속서 C UV 방사
부속서 G.5.3.4 FIW 시험
부속서 G.7 주전원 코드에 대한 시험 (IEC 60227)
부속서 G.9 직접회로 (IC) 전류 제한 시험
부속서 G13.6.2 스크래치 시험 (steel pin)
부속서 G.15 정수압/배관 및 부속품 적합성 시험
부속서 J 중간절연 없이 사용을 위한 절연권선 전선
부속서 M.7수소가스의 농도
부속서 M.8.2 외부 스파크 공급원의 내부 점화 방지 – 스파크 시험
부속서 R 제한 단락 시험(1 500 A)
부속서 S 배열 및 내화성 시험
부속서 U CRT의 기계적 강도/내파 시험
부속서 Y 옥외용 엔클로우저 구성 요구 사항 |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 5 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 42 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
(Exception)
5.4.1.5.3 Scratch test device with steel pin
5.4.1.10 Vicat test B 50 of ISO 306
5.4.3.3 CTI test (Tacking index per IEC 60112)
5.4.4.6.5 Mandrel test
5.6.4.1 (AnnexR) Source with at least 1 500 A short circuit 10 Radiations
Annex C UV raditaion
Annex G.5.3.4 Test for FIW
Annex G.7 Main supply cord for IEC 60227
Annex G.9 Integrated circuit(IC) current limiters
Annex G13.6.2 Scratch test device with steel pin
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without inter leaved insulation
Annex M.7 Concent ration of hydrogen gas
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex R Limited Short-circuit test (1 500 A)
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V(max), 20 A(max)
Heating: 200 ℃
Withstanding voltage: 5 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 42 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| IEC 62368-1:2014 |
Audio/video, information and communication technology equipment – Part1: Safety requirements
(Exception)
5.4.1.10 Vicat test B 50
5.4.3.3 CTI test (Tacking index per IEC 60112)
5.4.4.6.5 Mandrel test
5.6.4.1 (Annex R) Source with at least 1 500 A short circuit 10 Radiations
Annex G.7 Main supply cord for IEC 60227
Annex G.13.6.2 Abrasion resistance test
Annex G15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.6.2 Leakage current
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 5 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 42 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| EN IEC 62368-1:2020 +A11:2020 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
(Exception)
5.4.1.5.3 Scratch test device with steel pin
5.4.1.10 Vicat test B 50 of ISO 306
5.4.3.3 CTI test (Tacking index per IEC 60112)
5.4.4.6.5 Mandrel test
5.6.4.1 (Annex R) Source with at least 1 500 A short circuit 10 Radiations
Annex C UV raditaion
Annex G.5.3.4 Test for FIW
Annex G.7 Main supply cord for IEC 60227
Annex G.9 Integrated circuit (IC) current limiters
Annex G13.6.2 Scratch test device with steel pin
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without inter leaved insulation
Annex M.7 Concent ration of hydrogen gas
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex R Limited Short-circuit test (1 500 A)
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 5 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 42 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| EN 62368-1:2020 |
Audio/video, information and communication technology equipment - Part1: Safety requirements
(Exception)
5.4.1.10 Vicat test B 50
5.4.3.3 CTI test (Tacking index per IEC 60112)
5.4.4.6.5 Mandrel test
5.6.4.1 (Annex R) Source with atleast 1 500 A short circuit 10 Radiations
Annex G.7 Main supply cord for IEC 60227
Annex G.13.6.2 Abrasion resistance test
Annex G15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.6.2 Leakage current
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input: 600 V(max), 20 A(Max)
Heating: 200 ℃
Withstanding voltage: 5 kV
Stability: 20°
Push-Pull: 250 N
Humidity: 42 ℃, 95 % R.H.
Impact: 3.5 J |
소재지 |
| ▶ 전자기적합성 |
| KS C IEC 60601-1-2:2020 |
의료용 전기기기 - 제1-2부 : 기본 안전 및 필수 성능에 관한 일반 요구사항 - 보조표준: 전자파 장해 - 요구사항 및 시험 |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: 16 A 이하 |
소재지-1 |
| EN 61547:2009 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ±2 kV ~ ±8 kV
RS: 80 MHz ~ 1 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ±2 kV ~ ±8 kV
RS: 80 MHz ~ 2.7 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61204-3:2016 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (3 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (3 V)
M/F: 1 A/m~30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| EN IEC 61204-3:2018 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) - 제6-4부: 일반 표준 - 산업 환경에서의 전자파 방출 표준 |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) - 제6-3부: 일반표준 - 주거용, 상업용 및 경공업 환경에서의 전자파 방출 표준 |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) - 제6-2부: 일반표준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (10 V)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 1 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) - 제6-1부: 일반표준 - 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 1 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: 16 A 이하 |
소재지-1 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
RE: 9 KHz ~ 6 GHZ
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz (10 V)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| IEC 61000-4-34:2005+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
3 phase Below
0 V ~ 400 V
Less than 32 A
50/60 Hz |
소재지-1 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: particular requirements - In vitro diagnostic (IVD) medical equipment |
RE: 9 KHz ~ 6 GHZ
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz (10 V)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| KS C IEC 61326-2-5:2014 |
측정, 제어, 실험용 전기장치 - EMC 요건 - 제2-5부: 특정 요건 - IEC 61784-1, CP3/2에 따른 인터페이스를 장착한 필드 장치의 시험 구성, 동적 조건 및 성능 기준 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C IEC 61326-2-4:2014 |
측정, 제어, 실험용 전기장치 - EMC 요건 - 제2-4부: 특정 요건 - IEC 61557-8에 따른 절연 감시 장치와 IEC 61557-9에 따른 절연 고장 탐지 장치에 대한 시험 구성, 동작 조건 및 성능 기준 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C IEC 61326-2-3:2006 |
측정, 제어, 실험용 전기장치 - EMC 요건 - 제2-3부: 특정 요건 - 통합 또는 원격 신호 조정 기능이 있는 변환기에 대한 시험 구성, 운영 조건, 성능 기준 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C IEC 61326-2-1:2008 |
계측,제어 및 실험실용 전기기기- EMC 요구사항 - 제2-1부: 특수 요구사항 - EMC 비해당 분야용 고감도 시험기기 및 계측기기의 시험구성, 동작조건 및 성능기준 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C IEC 61000-4-34:2009 |
전자파적합성(EMC) - 제4-34부: 시험 및 측정기술 - 상당 입력전류 16 A를 초과하는 기기에 대한 전압 강하, 순간정전 및 전압변동 내성 시험 |
3 phase Below
0 V ~ 400 V
Less than 32 A
50/60 Hz |
소재지-1 |
| KS C IEC 61326-1:2008 |
계측, 제어 및 실험실용 전기기기 - EMC 요구사항 - 제1부: 일반 요구사항 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9547:2023 |
일반 조명기기 - 전자파적합성(EMC) 내성 요구사항 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (3 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (3 V)
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| S2-W-5:2023 |
한국산업안전보건공단 전자파시험기준(기계 기구 등에 관한 공통 기술기준) |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (10 V)
Voltage dips/interruptions: Less than 24A |
소재지-1 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) - 제4-11부: 시험 및 측정기술 - 전압강하, 순간정전, 전압변동 내성 시험 |
16 A 이하 |
소재지-1 |
| EN 61000-4-34:2007+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
3 phase Below
0 V ~ 400 V
Less than 32 A
50/60 Hz |
소재지-1 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성 시험 |
RS: 80 MHz ~ 6 GHz (30 V/m) |
소재지-1 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: ±2 kV ~ ±8 ㎸ |
소재지-1 |
| KS C 9610-3-3:2023 |
전자파적합성(EMC) - 제3-3부: 허용기준 - 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준(상당 16 A 이하 기기) |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| EN 61000-3-3:2013 +A1:2019 +A2:2021 +AC:2022 |
Electromagnetic compatibility (EMC) - Part3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker inpublic low – voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| IEC 61000-3-3:2013 + A1:2017 +A2:2021 |
Electromagnetic compatibility (EMC) - Part3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker inpublic low – voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| KS C 9610-3-2:2023 |
전자파적합성(EMC) - 제3-2부: 허용기준 - 고조파 전류의 허용기준(상당 입력 전류 16 A 이하 기기) |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| IEC 61000-3-2:2018 +A1:2020 +A2:2024 |
Electromagnetic compatibility (EMC) - Part3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| EN IEC 61000-3-2:2019 +A1:2021 +A2:2024 |
Electromagnetic compatibility (EMC) - Part3-2: Limits – Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| KS X IEC 60945:2020 |
해상항해 및 무선통신기기와 시스템 － 일반요구사항 － 시험방법과 요구되는 시험결과
(exception)
KN 60945_60533 part 5.3 |
RE: 9 kHz ~ 2 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (10 V)
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| IEC 60945:2002 |
Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results |
RE: 9 kHz ~ 2 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (10 V/m)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| EN 60945:2002 |
Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results |
RE: 9 kHz ~ 2 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (10 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (10 V/m)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EFT/Burst: ±0.5 kV ~ ±4 kV |
소재지-1 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EFT/Burst: ±0.5 kV ~ ±4 kV |
소재지-1 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성 시험 |
ESD: ±2 kV ~ ±30 ㎸ |
소재지-1 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: ±2 kV ~ ±8 ㎸ |
소재지-1 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| EN IEC 61000-4-11:2020 +AC:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
1 phase
Less than 16 A
50/60 Hz |
소재지-1 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) - 제4-8부: 시험 및측정기술 - 전원 주파수 자기장 내성 시험 |
M/F: 1 A/m ~ 30 A/m |
소재지-1 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
30 A/Continuos
100 A/Continuos (2 Hour)
1 000 A/Short (10 sec) |
소재지-1 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
30 A/Continuos
100 A/Continuos (2 Hour)
1 000 A/Short (10 sec) |
소재지-1 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부: 시험 및 측정 기술 - 전도성 RF 전자기장 내성 시험 |
CS: 150 kHz ~ 230 MHz |
소재지-1 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz ~ 230 MHz |
소재지-1 |
| EN 61000-4-6:2014+AC:2015 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz ~ 230 MHz |
소재지-1 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정 기술 - 서지 내성 시험 |
Surge: ±0.5 kV ~ ±6 kV |
소재지-1 |
| IEC 61000-4-5:2014 +A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Surge: ±0.5 kV ~ ±6 kV |
소재지-1 |
| EN 61000-4-5:2014 +A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Surge: ±0.5 kV ~ ±6 kV |
소재지-1 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) - 제4-4부: 시험 및 측정 기술 - 전기적 빠른 과도현상, 버스트 내성 시험 |
EFT/Burst: ±0.5 kV ~ ±4 kV |
소재지-1 |
| KS C 9835:2019 |
멀티미디어기기 전자파내성 시험방법 |
ESD: ±2 kV ~ ±8 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: 16 A 이하 |
소재지-1 |
| EN 55035:2017 +A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity Requirements |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (3 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6kV
CS: 150 kHz ~ 80 MHz (3 V/m)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity Requirements |
ESD: ±2 kV ~ ±8 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9832:2024 |
멀티미디어기기 전자파 장해방지 시험방법 |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| EN 55032:2015 +A1:2020 +A11:2020 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
RE: 30 MHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| CISPR 32:2015 +A1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 30 MHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| KS C CISPR 24:2014 |
전기자기적합성(EMC) - 정보기기(ITE)의 전기자기내성 시험방법 및 측정의 한계값 |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: 16 A 이하 |
소재지-1 |
| EN 55024:2010 +A1:2015 |
Information technology equipment – Immunity characteristics – Limits and methods of measurement
(Expection)
Annex A (normative) Telephony terminal equipment |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C IEC 61204-3:2003 |
저전압 직류전원장치 - 제3부: 전기자기적합성(EMC) |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz (3 V/m)
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (3 V)
M/F: 1 A/m ~ 30 A/m
Voltage dips/interruptions: Less than 24 A |
소재지-1 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz ~ 6 GHz (30 V/m) |
소재지-1 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz ~ 6 GHz (30 V/m) |
소재지-1 |
| KS B 6955:2019 |
전자기 적합성 - 엘리베이터, 에스컬레이터 및무빙워크 제품군 표준 - 방사 |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz |
소재지-1 |
| EN 60601-1-2:2015 +A1:2021 |
Medical electrical equipment - Part 1-2 : general requirements for basic safety and essential performance - Collateral standard : electromagnetic disturbances - Requirements and tests |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 1 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN 50130-4:2011 +A1:2014 |
Alarm systems - Part 4 : electromagnetic compatibility - Product family standard : immunity requirements for components of fire, intruder, hold up, CCTV, acess control and social alarm systems |
ESD: ±2 kV ~ ±8 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| EN 12015:2020 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
RE: 30 MHz ~ 1 GHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| KS C 9815:2023 |
조명기기 및 유사기기의 무선방해특성의 측정허용기준 및 측정방법
(제외항목)
4.1 삽입손실 |
RE: 9 kHz ~ 1 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| EN 55014-2:2021 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part2: Immunity – Product family standard
(Exception)
Equipment input current ≥ 16 A per phase |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| CISPR 14-2:2020 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part2: Immunity – Product family standard
(Exception)
Equipment input current ≥ 16 A per phase |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 1 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 – 제 1부: 방출
(제외항목)
기기입력전류 ≥ 16 A |
RE: 30 MHz ~ 1 GHz
Disturbance Power: 30 MHz ~ 300 MHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part1: Emission
(Expection)
Equipment input current ≥ 16 A per phase |
RE: 30 MHz ~ 1 GHz
Disturbance Power: 30 MHz ~ 300 MHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| CISPR 14-1:2020 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part1: Emission
(Expection)
Equipment input current ≥ 16 A per phase |
RE: 30 MHz ~ 1 GHz
Disturbance Power: 30 MHz ~ 300 MHz
CE: 9 kHz ~ 30 MHz
Discontinuous disturbance: 150 kHz ~ 30 MHz |
소재지-1 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM)기기 – 무선 주파수 방해특성 – 허용기준 및 측정방법
<제외항목>
6.2.1.3 표2 시험장에서 측정된 1종 A급기기에 대한 주전원포트 방해전압 허용기준 정격입력 전력 > 20 kVA
6.2.2.3 표4 시험장에서의 1종 A급기기에 대한 전자파 방사성방해 허용기준 > 20 kVA
6.3.1.3 표6 시험장에서 2종 A급기기에 대한 전원포트 방해전압 허용기준 > 75 kVA
6.3.2.4 6 GHz ~ 18 GHz의 주파수대역
6.4.2 표17 설치장소에서 측정하는 1종 A급기기 전자파 방사성방해 허용기준
6.4.2 표18 설치 장소에서 측정하는 2종 A급기기 전자파 방사성방해 허용기준 |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| EN 55011:2016 +A1:2017 +A2:2021 +A11:2020 |
Industrial, scientific and medical equipment – Radio – frequency disturbance characteristics – Limits and methods of measurement
(Expection)
6.2.1.3 Table 2 Mains terminal disturbance voltage limits for class A group 1 equipment measured on a test site > 20 kVA
6.2.2.3 Table 4 Electromagnetic radiation disturbance limits for class A group 1 equipment measured on a test site > 20 kVA
6.3.1.3 Table 6 Mains terminal disturbance voltage limits for class A group 2 equipment measured on a test site > 75 kVA
6.3.2.4 Frequency range 6 GHz to 18 GHz
6.4.2 Table 17 Electromagnetic radiation disturbance limits for class A group 1 equipment measured in situ
6.4.2 Table 18 Electromagnetic radiation disturbance limits for class A group 2 equipment measured in situ |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment – Radio – frequency disturbance characteristics – Limits and methods of measurement
(Expection)
6.2.1.3 Table 2 Mains terminal disturbance voltage limits for class A group 1 equipment measured on a test site > 20 kVA
6.2.2.3 Table 4 Electromagnetic radiation disturbance limits for class A group 1 equipment measured on a test site > 20 kVA
6.3.1.3 Table 6 Mains terminal disturbance voltage limits for class A group 2 equipment measured on a test site > 75 kVA
6.3.2.4 Frequency range 6 GHz to 18 GHz
6.4.2 Table 17 Electromagnetic radiation disturbance limits for class A group 1 equipment measured in situ
6.4.2 Table 18 Electromagnetic radiation disturbance limits for class A group 2 equipment measured in situ |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| AS/NZS CISPR 11:2011 |
Industrial, scientific and medical equipment – Radio – frequency disturbance characteristics – Limits and methods of measurement
(Expection)
6.2.1.3 Table 2 Mains terminal disturbance voltage limits for class A group 1 equipment measured on a test site > 20 kVA
6.2.2.3 Table 4 Electromagnetic radiation disturbance limits for class A group 1 equipment measured on a test site > 20 kVA
6.3.1.3 Table 6 Mains terminal disturbance voltage limits for class A group 2 equipment measured on a test site > 75 kVA
6.3.2.4 Frequency range 6 GHz to 18 GHz
6.4.2 Table 17 Electromagnetic radiation disturbance limits for class A group 1 equipment measured in situ
6.4.2 Table 18 Electromagnetic radiation disturbance limits for class A group 2 equipment measured in situ |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| KS B 6945:2019 |
전자기 적합성 - 엘리베이터, 에스컬레이터 및 수평 보행기 제품군 규격 - 내성 |
ESD: ±15 kV
RS: 80 MHz ~ 166 MHz (10 V/m)
166 MHz ~ 1 000 MHz (30 V/m)
1 710 MHz ~ 1 785 MHz (30 V/m)
1 805 MHz ~ 2 220 MHz (10 V/m)
2 300 MHz ~ 2 675 MHz (10 V/m)
EFT: ±4 kV
Surge: ±2.5 kV
CS: 150 kHz ~ 80 MHz (10 V)
Voltage dips: Max 100 % |
소재지-1 |
| EN 12016:2013 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 166 MHz (10 V/m)
166 MHz ~ 1 000 MHz (30 V/m)
1 710 MHz ~ 1 785 MHz (30 V/m)
1 805 MHz ~ 2 220 MHz (10 V/m)
2 300 MHz ~ 2 675 MHz (10 V/m)
EFT: ±0.5 ~ ±5 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 80 MHz (10 V)
Voltage dips/interruptions: Less than 24A |
소재지-1 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부: 내성
(제외 항목)
기기 입력 전류 ≥ 16 A |
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 6 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: 16 A 이하 |
소재지-1 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(exception)
3.1.1 Insertion loss Test |
RE: 9 kHz ~ 1 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| EN IEC 55015:2019 +A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
3.1.1 Insertion loss Test |
RE: 9 kHz ~ 1 GHz
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| IEC 60601-1-2:2014 +A1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
ESD: ±2 kV ~ ±30 kV
RS: 80 MHz ~ 3 GHz
EFT/Burst: ±0.5 kV ~ ±4 kV
Surge: ±0.5 kV ~ ±6 kV
CS: 150 kHz ~ 230 MHz
Voltage dips/interruptions: Less than 16 A |
소재지-1 |
| ▶ 에너지효율 |
| 산업통상자원부 고시 제2022-33호(2022.02.15.) |
대기전력저감프로그램운용규정
6. 스캐너
8. 자동절전제어장치
10. 오디오
11. DVD플레이어
12. 라디오카세트
13. 전자레인지
15. 도어폰
16. 유무선전화기
18. 모뎀
20. 손건조기
21. 서버
22. 디지털컨버터
23. 유무선공유기 |
입력전압: 220 V
주파수: 60 Hz
6. 1 kW 이하
8. 35 W 이하
10. 1 kW 이하
11. 150 W 이하
12. 1 kW 이하
13. 4 kW 이하
15. 100 W 이하
16. 150 W 이하
18. 150 W 이하
20. 3 kW 이하
21. 3 kW 이하
22. 100 W 이하
23. 22.5 W 이하 |
소재지 |
| 산업통상자원부 고시 제2025-145호(2025.08.13.) |
효율관리기자재 운용규정
12. 선풍기
20. 어댑터. 충전기
26. 텔레비전수상기
37. 셋톱박스
44. 모니터
49. 컴퓨터 |
입력전압: 220 V
주파수: 60 Hz
12. 날개 지름: 20 cm ~ 41 cm
20. 150 W 이하
26. 화면 대각선: (47 ~ 216) cm,수직해상도: 4 320 미만
37. 150 W 이하
44. 화면 대각선: 153 cm 이하
49. 500 W 이하 |
소재지 |
| IEC 62018:2003 (Ed.1.0) |
Power consumption of information technology equipment - Measurement methods |
Input: 250 V a.c.(Max)
Temp.: (18 ~ 28) ℃ |
소재지 |
| IEC 62087:2011 (Ed.3.0) |
Methods of measurement for the power consumption of audio, video and related equipment |
Input: 250 V a.c.(Max)
Temp.: (15 ~ 35) ℃ |
소재지 |
| KS C IEC 62301:2011 |
가정용 전기기기의 대기 전력 측정 방법 |
입력전압: 최대 250 V a.c. |
소재지 |
| IEC 62301:2011 |
Household electrical appliances - Measurement of standby power |
Input: 250 V a.c.(Max) |
소재지 |
