home검색서비스>시험기관검색

시험기관검색KOLAS Search Service

시험은 특정한 제품,공정 또는 서비스를 대상으로 하나 또는 그 이상의 특성을 규정된 절차에 따라 측정하는 기술적인 작업, 설계, 제품, 서비스, 공정, 공장에 대한 조사 및 특정요건이나 전문적 판정, 일반요건을 근거로 한 적합성 판정을 말한다.

인정번호 (Accreditation No) KT196
기관명
(Organization Name)
한국생산기술연구원
공인유효기간 2024-02-15 ~ 2028-02-14
주소 충청남도 천안시 서북구 입장면 양대기로길 89
소재지 충청남도 천안시 서북구 입장면 양대기로길 89
소재지-1 경상북도 영천시 양호길 57
담당자 권몽주
전화 번호 041-589-8588
팩스 번호 041-589-8213
인정범위 전기시험
규격번호
(Test method)
규격명
(Standard designation)
시험범위
(Test Range)
사업장
(Site)
▶ 전자기적합성
RTCADO-160G:2010 Environmental Conditions and Test Procedures for Airborne Equipment
Section 20, Radio Frequency Susceptibility (Radiated and Conducted)
Section 21, Emission of Radio Frequency Energy
Section 22, Lightning Induced Transient Susceptibility
Section 25, Electrostatic Discharge
CS : 10 kHz ∼ 400 MHz
RS : 100 MHz ∼ 18 GHz (Max. 200 V/m)
CE : 150 kHz ∼ 6 GHz
RE : 100 kHz ∼ 152 MHz
간접낙뢰 : WF1, WF2, WF3, WF4, WF5, WF6 / Pin Injection, Single Stoke, Multiple Stroke, Multiple Burst
ESD : ± (2 ∼ 15) kV
소재지-1
MIL-STD-461G:2015 DEPARTMENT OF DEFENSE
INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, audio frequency currents, power leads
5.5 CE102, conducted emissions, radio frequency potential, power leads
5.6 CE106, conducted emissions, antenna port
5.7 CS101, conducted susceptibility, power leads
5.11 CS109, conducted susceptibility, structure current
5.12 CS114, conducted susceptibility, bulk cable injection
5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation
5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads
5.15 CS117, conducted susceptibility, lightning induced transients, cables and power leads
5.16 CS118, personnel borne electrostatic discharge
5.17 RE101, radiated emissions, magnetic field
5.18 RE102, radiated emissions, electric field
5.20 RS101, radiated susceptibility, magnetic field
5.21 RS103, radiated susceptibility, electric field

2 MHz ∼ 100 MHz, 200 V/m
CE101: 30 Hz ∼ 10 kHz
CE102: 10 kHz ∼ 10 MHz
CE106: 10 kHz ~ 40 GHz
CS101: 30 Hz ∼ 150 kHz
CS109: 60 Hz ∼ 100 kHz
CS114: 4 kHz ∼ 200 MHz
CS115: Impulse 5 A
CS116: 10 kHz ∼ 100 MHz
CS117: WF1, WF2, WF3, WF4, WF5, WF6 / Multiple Stroke, Multiple Burst
CS118: ± (2 ∼ 15) kV
RE101: 30 Hz ∼ 100 kHz
RE102: 10 kHz ∼ 18 GHz
RS101: 30 Hz ∼ 100 kHz
RS103: 2 MHz ∼ 18 GHz (Max. 200 V/m)
소재지-1
MIL-STD-461F:2007 DEPARTMENT OF DEFENSE
INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz
5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz
5.6 CE106, conducted emissions, antenna terminal, 10 kHz to 40 GHz
5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz
5.11 CS106, conducted susceptibility, transients, power leads
5.12 CS109, conducted susceptibility, structure current, 60 Hz to 100 kHz
5.13 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
5.14 CS115, Conducted susceptibility, bulk cable injection, impulse excitation
5.15 CS116, conducted susceptibility, damped sinusoidal transients, cables and power
leads, 10 kHz to 100 MHz
5.16 RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz
5.17 RE102, radiated emissions, electric field, 10 kHz to 18 GHz
5.19 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
5.20 RS103, radiated susceptibility, electric field, 2 MHz to 40 GHz

2 MHz ∼ 100 MHz, 200 V/m
CE101: 30 Hz ∼ 10 kHz
CE102: 10 kHz ∼ 10 MHz
CE106: 10 kHz ∼ 40 GHz
CS101: 30 Hz ∼ 150 kHz
CS106: 400 Vpeak
CS109: 60 Hz ∼ 100 kHz
CS114: 4 kHz ∼ 200 MHz
CS115: Impulse 5 A
CS116: 10 kHz ∼ 100 MHz
RE101: 30 Hz ∼ 100 kHz
RE102: 10 kHz ∼ 18 GHz
RS101: 30 Hz ∼ 100 kHz
RS103: 2 MHz ∼ 18 GHz (Max. 200 V/m)
소재지-1
▶ 에너지효율
KS B 8292 : 2023 물-물 지열원 열펌프 유닛
(제외항목)
브라인-물 열펌프 유닛
정격용량 : 최대 530 kW 소재지
KS B 6275 : 2018 워터 칠링 유닛
6.2 냉각 능력
6.3 냉각 소비 전력
6.4 히트 펌프 가열 능력
6.5 히트 펌프 가열 소비 전력
6.6 전열 장치의 소비 전력
6.13 자동 서리제거 기능
6.14 저온 성능
냉각능력 : 최대 100 kW 소재지
▶ 환경 및 신뢰성
MIL-STD-810G:2008 Department of Defense Test Method
Standard : Environmental Engineering
Considerations and Laboratory Tests

- Method 500.5 Low Pressure (Altitude)



- Method 501.5 High Temperature

- Method 502.5 Low Temperature

- Method 505.5 Solar Radiation (Sunshine)


- Method 507.5 Humidity


- Method 511.5 Explosive Atmosphere

- Method 513.6 Acceleration

- Method 514.6 Vibration
Method 500.5 :
Altitude (0 ~ 12 200) m
Pro III
ProIV

Method 501.5 & 502.5 :
Temperature (-60 ~ 120) ℃




Method 505.5 :
Solar Radiation (0 ~ 1 120) W/m2

Method 507.5 :
Humidity (15 ~ 95) % R.H.

Method511.5
Altitude (0 ~ 13 000) m

Method 513.6 :
Acceleration (0 ~ 980) m/s2

Method514.6 :
Frequency (10 ~ 2 000) Hz
소재지-1
MIL-STD-810G w/Change 1: 2014 Department of Defense Test Method
Standard : Environmental Engineering
Considerations and Laboratory Tests

- Method 500.6 Low Pressure (Altitude)



- Method 501.6 High Temperature

- Method 502.6 Low Temperature

- Method 505.6 Solar Radiation (Sunshine)


- Method 507.6 Humidity


- Method 511.6 Explosive Atmosphere

- Method 513.7 Acceleration


- Method 514.7 Vibration
Method 500.6 :
Altitude (0 ~ 12 200) m
Pro III
Pro IV

Method 501.6 & 502.6 :
Temperature (-60 ~ 120) ℃




Method 505.6 :
Solar Radiation (0 ~ 1 120) W/㎡

Method 507.6 :
Humidity (15 ~ 95) % R.H.

Method 511.6 :
Altitude (0 ~ 13 000) m

Method 513.7 :
Acceleration (0 ~ 980) ㎨

Method 514.7 :
Frequency (10 ~ 2 000) Hz
소재지-1
MIL-STD-810H: 2019 Department of Defense Test Method
Standard : Environmental Engineering
Considerations and Laboratory Tests

- Method 500.6 Low Pressure (Altitude)



- Method 501.7 High Temperature

- Method 502.7 Low Temperature

- Method 505.7 Solar Radiation (Sunshine)


- Method 507.6 Humidity


- Method 511.7 Explosive Atmosphere

- Method 513.8 Acceleration

- Method 514.8 Vibration
Method 500.6 :
Altitude (0 ~ 12 200) m
Pro III
Pro IV

Method 501.7 & 502.7 :
Temperature (-60 ~ 120) ℃




Method 505.7 :
Solar Radiation (0 ~ 1 120) W/㎡

Method 507.6 :
Humidity (15 ~ 95) % R.H.

Method 511.7 :
Altitude (0 ~ 13 000) m

Method 513.8 :
Acceleration (0 ~ 980) ㎨

Method 514.8 :
Frequency (10 ~ 2 000) Hz
소재지-1
RTCA/DO-160G: 2010 Environmental Conditions and
Test Procedures for Airborne
Equipment

- Section 4.0 Temperature and Altitude



- Section 6.0 Humidity


- Section 8.0 Vibration


- Section 9.0 Explosive Proofness
4.0: Temperature (-60 ~ 120) ℃
Altitude (0 ~ 12 200) m
Pro III
Pro IV

6.0: Humidity (15 ~ 95) % R.H.


8.0: Frequency (10 ~ 2 000) Hz


9.0: Temperature (0 ~ 100) ℃
소재지-1