| ▶ 산업용 전기기기 |
| KS C IEC 60204-1:2016 |
기계류의 안정성 - 기계의 전기 장비 - 제1부 : 일반 요구 사항
18.2.2 시험 1 - 보호 접지 회로의 연속성 검증
18.3 절연 저항 시험
18.4 전압시험
18.5 잔류 전압 보호 |
보호접지회로의 연속성검증
: Max. 10 A
절연저항
: DC 500 V, Max. 1 GΩ
전압시험
: Max. AC 5 kV
잔류전압보호
: Max. 60 V |
소재지 |
| IEC 60204-1:2016+AMD1:2021 |
Safety of machineryElectrical equipment of
machines - Part 1:General requirements
18.2.2 Test 1 -
Verification of the continuity of the protective bonding circuit
18.3 Insulation
resistance tests
18.4 Voltage tests
18.5 Protection against residual voltages |
Earth Continuity
: Max. 10 A
Insulation resistance
: DC 500 V, Max. 1 GΩ
Electrical Strength
: Max. AC 5 kV
Residual Voltage
: Max. 60 V |
소재지 |
| EN 60204-1:2018 |
Safety of machineryElectrical equipment of
machines - Part 1:General requirements
18.2.2 Test 1 -
Verification of the continuity of the protective bonding circuit
18.3 Insulation
resistance tests
18.4 Voltage tests
18.5 Protection against residual voltages |
Earth Continuity
: Max. 10 A
Insulation resistance
: DC 500 V, Max. 1 GΩ
Electrical Strength
: Max. AC 5 kV
Residual Voltage
: Max. 60 V |
소재지 |
| ▶ 전자기적합성 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) - 제6-2부 : 일반표준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준
(제외사항)
방사선 RF전자기장 내성시험, 시험 및 측정기술 전원 주파수 자기장 내성 시험, 신호 및 제어포트의 서지시험 |
정전기 방전
: Max. ± 8 kV
버스트:
: Max. ± 2 kV
서지:
: Max. ± 2 kV
전도성 RF 전자기장 내성
: (0.15 ~ 80) MHz, 10 V
전압강하, 순간정전:
(0 ~ 100) %, Max. 16 A |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility
(EMC) - Part 6-2：Generic
standards - Immunity for industrial environments
(Exception)
Radiated radio-frequency,
electromagnetic field
immunity test,
Surge test of Signal/control ports |
ESD
: Max. ± 8 kV
Burst
: Max. ± 2 kV
Surge
: Max. ± 2 kV
CS
: (0.15 ~ 80) MHz, 10 V
Dip
: (0 ~ 100) %, Max. 16 A |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility
(EMC) - Part 6-2：Generic
standards - Immunity for industrial environments
(Exception)
Radiated radio-frequency,
electromagnetic field
immunity test,
Surge test of Signal/control ports |
ESD
: Max. ± ８ kV
Burst
: Max. ± 2 kV
Surge
: Max. ± 2 kV
CS
: (0.15 ~ 80) MHz, 10 V
Dip
: (0 ~ 100) %, Max. 16 A |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) - 제6-4부 : 일반표준 - 산업 환경에서의 전자파 방출 표준
(제외사항)
방사성 방해,
유선 네트워크 포트 시험 |
주파수
: (0.15 ~ 30) MHz
전압
: Max. 400 V
전류
: Max. 100 A |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility
(EMC) - Part 6-4：Generic
standards - Emission standard for industrial environments
(Exception)
Radiated disturbances.
Wired network port test |
frequency
: (0.15 ~ 30) MHz
Votage
: Max. 400 V
Current
: Max. 100 A |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility
(EMC) - Part 6-4：Generic
standards - Emission standard for industrial environments
(Exception)
Radiated disturbances.
Wired network port test |
frequency
: (0.15 ~ 30) MHz
Votage
: Max. 400 V
Current
: Max. 100 A |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) - 제4-2부 : 시험 및 측정기술 - 정전기 방전 내성 시험 |
Max. ± 8 kV |
소재지 |
| IEC 61000-4-2:2025 |
Electromagnetic
compatibility (EMC) - Part 4-2 : Testing and measurement
techniques -
Electrostatic discharge
immunity test |
Max. ± 8 kV |
소재지 |
| EN IEC 61000-4-2:2025 |
Electromagnetic
compatibility (EMC) - Part 4-2 : Testing and measurement
techniques -
Electrostatic discharge
immunity test |
Max. ± 8 kV |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) - 제4-4부 : 시험 및 측정기술 전기적 빠른 과도현상, 버스트 내성시험 |
Max. ± 2 kV |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic
compatibility (EMC) - Part 4-4 : Testing and measurement techniques
- Electrical fast transient/burst immunity test |
Max. ± 2 kV |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic
compatibility (EMC) - Part 4-4 : Testing and measurement techniques
- Electrical fast transient/burst immunity test |
Max. ± 2 kV |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) - 제4-5부 : 시험 및 측정기술 서지 내성 시험 |
Max. ± 2 kV |
소재지 |
| IEC 61000-4-5:2014 |
Electromagnetic
compatibility (EMC) - Part 4-5 : Testing and measurement techniques
- Surge immunity test |
Max. ± 2 kV |
소재지 |
| EN 61000-4-5:2014/A1:2017 |
Electromagnetic
compatibility (EMC) - Part 4-5 : Testing and measurement techniques
- Surge immunity test |
Max. ± 2 kV |
소재지 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부 : 시험 및 측정기술 전도성 RF 전자기장 내성 시험 |
(0.15 ~ 80) MHz, 10 V |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic
compatibility (EMC) - Part 4-6 : Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
(0.15 ~ 80) MHz, 10 V |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic
compatibility (EMC) - Part 4-6 : Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
(0.15 ~ 80) MHz, 10 V |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) - 제4-11부 : 시험 및 측정기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 |
(0 ~ 100) %, Max. 16 A |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic
compatibility (EMC) - Part 4-11 : Testing and
measurement
techniques - Voltage
dips, short interruptions
and voltage variations
immunity tests for
equipment with input
current up to 16 A per phase |
(0 ~ 100) %, Max. 16 A |
소재지 |
| EN IEC 61000-4-11:2020 |
Electromagnetic
compatibility (EMC) - Part 4-11 : Testing and
measurement
techniques - Voltage
dips, short interruptions
and voltage variations
immunity tests for
equipment with input
current up to 16 A per phase |
(0 ~ 100) %, Max. 16 A |
소재지 |
| ▶ 소프트웨어 |
| EN 18031-1:2024 |
Common security requirements for radio equipment - Part 1: Internet connected radio equipment |
- |
소재지 |
| EN 18031-2:2024 |
Common security requirements for radio equipment - Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment |
- |
소재지 |
| ETSI EN 303 645 V3.1.3 (2024-09) |
CYBER; Cyber Security for Consumer Internet of Things: Baseline Requirements |
- |
소재지 |
| IEC 62443-3-3:2013 |
Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels |
- |
소재지 |
| IEC 62443-4-2:2019 |
Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components |
- |
소재지 |
