| ▶ 금속 및 관련제품 |
| KS B 0802:2003 |
금속재료 인장 시험 방법
7.e) 인장강도,
7.h) 파단 연신율,
7.j) 단면수축률 |
최대 400 kN,
연신율 (0 ~ 80) % |
소재지 |
| KS B 0804:2001 |
금속 재료 굽힘 시험 |
최대 400 kN |
소재지 |
| ASTM E8/E8M-25 |
Standard Test Methods for Tension Testing of Metallic Materials¹ |
Max. 400 kN,
Elongation (0 ~ 80) % |
소재지 |
| KS D 0026:2002 |
철강 재료 및 내열 합금의 고온 인장 시험방법 |
최대 90 kN
온도 : 최대 1 000 ℃ |
소재지 |
| ▶ 플라스틱 및 관련제품 |
| ASTM D 7905/D7905M-19e1 |
Standard Test Method for Determination of the Model Ⅱ Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
Max. 25 kN |
소재지 |
| ASTM D2344/D2344M-22 |
Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
Max. 90 kN |
소재지 |
| ASTM D3039/D3039M-17(2025) |
Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
Max. 400 kN |
소재지 |
ASTM D3165-07
(2023) |
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies |
Max. 90 kN |
소재지 |
| ASTM D3410/D3410M-16(2024) |
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear
Loading¹ |
Max. 90 kN |
소재지 |
| ASTM D3518/D3518M-18(2025) |
Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45˚ Laminate |
Max. 90 kN |
소재지 |
| ASTM D5528/D5528M-21 |
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
Max. 25 kN |
소재지 |
| ASTM D5766/D5766M-23 |
Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates¹ |
Max. 400 kN |
소재지 |
| ASTM D5961/D5961M-23 |
Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates¹ |
Max. 90 kN |
소재지 |
| ASTM D638-22 |
Standard Test Method for Tensile Properties of Plastics |
Max. 400 kN |
소재지 |
| ASTM D6484/D6484M-23 |
Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix composite Laminates¹ |
Max. 400 kN |
소재지 |
| ASTM D6641/D6641M-23 |
Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture¹ |
Max. 90 kN |
소재지 |
| ASTM D6671/D6671M-22 |
Standard Test Method for Mixed Mode Ⅰ-Mode Ⅱ Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
Max. 25 kN |
소재지 |
| ASTM D6742/D6742M-23 |
Standard Practice for Filled-Hole Tension and Compression Testing of Polymer matrix Composite Laminates¹ |
Max. 400 kN |
소재지 |
| ASTM D695-26 |
Standard Test Method for Compressive Properties of Rigid Plastics¹ |
Max. 90 kN |
소재지 |
| ASTM D7248/D7248M-23 |
Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2- Fastener Specimens¹ |
Max. 90 kN |
소재지 |
| ASTM D7264/D7264M-21 |
Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials |
Max. 90 kN |
소재지 |
| ASTM D7332/D7332M-23 |
Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix
Composite¹ |
Max. 90 kN |
소재지 |
| ASTMD5379/D5379M-19e1 |
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
Max. 90 kN |
소재지 |
| KS M ISO 14125 : 1998 |
섬유 강화 플라스틱 복합 재료-굴곡 물성의 측정 |
최대 90 kN |
소재지 |
| KS M ISO 14126 : 1999 |
섬유 강화 플라스틱 복합 재료-면내 방향에서 압축성의 측정 |
최대 400 kN |
소재지 |
| KS M ISO 14129 : 1997 |
섬유강화 플라스틱 복합재료-±45° 인장 시험법에 의한 면 내 전단 탄성률, 강도 및 전단 응력/전단 변형률 응답의 측정 |
최대 400 kN |
소재지 |
| KS M ISO 178 : 2019 |
플라스틱-굴곡성의 측정 |
최대 90 kN |
소재지 |
| KS M ISO 527-2 : 2012 |
플라스틱 - 인장성의 측정 - 제2부 : 성형 및 압출 플라스틱의 시험조건 |
최대 90 kN |
소재지 |
| KS M ISO 527-4 : 2021 |
플라스틱 - 인장성의 측정 - 제4부 : 등방성 및 직교 섬유강화 플라스틱 복합재료의 시험조건 |
최대 400 kN |
소재지 |
| KS M ISO 527-5 : 2021 |
플라스틱 - 인장성의 측정 - 제5부 : 일방향 섬유강화 플라스틱 복합재료의 시험조건 |
최대 400 kN |
소재지 |
| ▶ 환경 및 신뢰성 |
| ES 95400-10:2014 |
자동차용 전자기기 환경시험
6.2.1 고온 작동/방치시험
6.2.2 저온 작동/방치시험
6.2.3 고온고습 전원인가 기본시험
6.2.4 온습도 싸이클 시험
6.2.5 온도 싸이클 시험
6.2.6 내충격시험
6.2.7 낙하시험
6.2.13 염수 분무시험
6.3.1 공진점 내구시험
6.3.2 진동내구시험 1
6.3.3 진동내구시험 2
6.4.1 열충격 시험
6.4.2 고온 동작 내구시험
6.5.1 고,저온 작동한계시험 |
1) (-60 ~ 150) ℃
2) (50 ~ 95) % R.H.
3) (1 ~ 600) ㎨
4) (1 ~ 30) ms
5) (1 ~ 1 500) m
6) Nacl : (5 ± 1) %
7) PH : (6.5 ~ 7.2)
8) (5 ~ 2 000) ㎐ |
소재지 |
| ES91500-00 : 2016 |
커넥터-일반
6.3.3 내한방치 시험
6.3.4 냉열충격 시험
6.3.5 고온방치 시험
6.3.7 온습도 CYCLE 시험 |
1) (-60 ~ 150) ℃
2) (50 ~ 95) % R.H. |
소재지 |
| GMW 3172:2018 |
General Specification for Electrical/Electronic Components – Environmental/Durability
9.3.1 Vibration with Termal Cycling
9.3.2 Mechanical Shock - Pothole
9.3.3 Mechanical Shock - Collision
9.3.4 Mechanical Shock - Closure Slam
9.3.10 Free Fall
9.4.1 High Temperature Degradation
9.4.2 Thermal Shock Air-to-Air(TS)
9.4.3 Power Temperature Cycle(PTC)
9.4.5 Humid Heat cyclic(HHC)
9.4.6 Humid Heat Constant(HHCO)
9.4.7 Salt Mist |
1) (-60 ~ 150) ℃
2) (50 ~ 95) % R.H.
3) (1 ~ 600) ㎨
4) (1 ~ 30) ms
5) (1 ± 0.001) m
6) Nacl : (5 ± 1) %
7) PH : (6.5 ~ 7.2)
8) (5 ~ 2 000) ㎐ |
소재지 |
| IEC 60068-2-1 : 2025 |
Environmental testing-Part 2-1 : Tests - Test A : Cold |
(-60 ~ 5) ℃ |
소재지 |
| IEC 60068-2-14 : 2023 |
Environmental testing-Part 2-14 : Tests-Test N : Change of temperature
(exception)
9.Test Nc : Rapid change of temperature, two-fluid-bath method |
(-60 ~ 150) ℃ |
소재지 |
| IEC 60068-2-2 : 2025 |
Environmental testing-Part 2-2 : Tests-Test B : Dry heat |
(-60 ~ 150) ℃ |
소재지 |
| IEC 60068-2-30 : 2025 |
Environmental testing-Part 2-30 : Tests-Test Db : Damp heat, cyclic(12h+12h cycle) |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H. |
소재지 |
| IEC 60068-2-38 : 2021 |
Environmental testing-Part 2-38 : Tests-Test Z/AD:Composite temperature/humidity cyclic test |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H. |
소재지 |
| IEC 60068-2-52 : 2017 |
Environmental testing-Part 2-52 : Tests-Test Kb : Salt mist, cyclic(sodium chloride solution) |
1) (25 ~ 50) ℃
2) (20 ~ 95) % R.H.
3) NaCl : (5 ± 1) %
4) pH : (6.5 ~ 7.2) |
소재지 |
| IEC 60068-2-6 : 2007 |
Environmental testing-Part 2-6 : Tests-Test Fc : Vibration(sinusoidal) |
1) (5 ~ 2 000) Hz
2) 500 ㎨ |
소재지 |
| IEC 60068-2-78 : 2025 |
Environmental testing-Part 2-78 : Tests-Test Cab:Damp heat, steady state |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H. |
소재지 |
| IEC 61373 : 2010 |
Railway applications-Rolling stock equipment-Shock and vibration tests |
1) (1 ~ 2 000) Hz
2) (1 ~ 500) ㎨
3) (1 ~ 30) ms |
소재지 |
| ISO 16750-3:2023 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads
4.1 Vibration
4.2 Mechanical shock
4.3 Free fall |
1) (-60 ~ 150) ℃
2) (1 ~ 600) ㎨
3) (1 ~ 30) ms
4) (1 ± 0.001) m |
소재지 |
| ISO 16750-4:2023 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads
5.1 Tests at constant temperature
5.2 Temperature step test
5.3 Temperature cycling tests
5.5 Salt spray tests
5.6 Humid heat, cyclic test
5.7 Damp Heat, steady-state test |
1) (-60 ~ 150) ℃
2) (1 ~ 1.3) L/sec
3) (50 ~ 95) % R.H.
4) Nacl : (5 ± 1) %
5) PH : (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-1 : 2007 |
환경 시험-제2-1부 : 시험-시험 A : 내한성 시험 |
(-60 ~ 5) ℃ |
소재지 |
| KS C IEC 60068-2-11 : 2021 |
환경 시험 - 제2-11부: 시험-시험 Ka: 염수분무 |
1) (20 ~ 50) ℃
2) NaCl : (5 ± 1) %
3) pH : (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-14 : 2023 |
환경 시험－제2-14부：시험-시험 N：온도 변화
(제외)
9.시험 Nc : 온도의 급변 (2욕조법) |
( -60 ~ 150 ) ℃ |
소재지 |
| KS C IEC 60068-2-2 : 2007 |
환경 시험-제2-2부 : 시험-시험 B : 내열성 시험 |
( 30 ~ 150 ) ℃ |
소재지 |
| KS C IEC 60068-2-27:2008 |
환경 시험 - 제2-27부: 시험-시험 Ea와 지침 : 충격 시험 |
1) (10 ~ 500) ㎨
2) (1 ~ 30) ms |
소재지 |
| KS C IEC 60068-2-38 : 2021 |
환경 시험 - 제2-38부 : 시험-시험 Z/AD : 복합 온도/습도 사이클 시험 |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-52:2017 |
환경시험 - 제2-52부: 시험 - 시험 Kb: 염수분무, 사이클(염화소듐용액) |
1) (25 ~ 50) ℃
2) (20 ~ 95) % R.H.
3) NaCl : (5 ± 1) %
4) pH : (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-6 : 2015 |
환경 시험－제2-6부 : 시험－시험 Fc : 진동(정현파) |
1) (5 ~ 2 000) Hz
2) (1 ~ 500) ㎨ |
소재지 |
| KS C IEC 60068-2-61:1991 |
환경 시험 - 제2-61부: 시험방법 - 시험 Z/ABDM: 일련 내후성 (제외) - 단계 4 : 저기압 |
1) (-60 ~ 150) ℃
2) (30 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-78 : 2012 |
환경 시험-제2-78부: 시험-시험 Cab : 안정상태의 내습성 시험 |
1) (28 ~ 42) ℃
2) (82 ~ 95) % R.H. |
소재지 |
| KS C IEC 61373 : 2010 |
철도적용-철도차량 장치-충격 및 진동시험 |
1) (1 ~ 2 000) Hz
2) (1 ~ 500) ㎨
3) (1 ~ 30) ms |
소재지 |
| KS D 9502 : 2024 |
염수 분무 시험방법 (중성, 아세트산 및 캐스 분무 시험) (제외) -아세트산 염수분무 시험 (AASS) -캐스시험 (CASS) |
1) (20 ~ 50) ℃
2) NaCl (5 ± 1) %
3) pH : (6.5 ~ 7.2) |
소재지 |
| KS R 9144 : 2021 |
철도 차량 부품의 진동 시험 방법 |
1) (5 ~ 2 000) Hz
2) 500 ㎨ |
소재지 |
| KS R 9186 : 2021 |
철도 신호 보안 부품-진동 시험방법 |
1) (5 ~ 2 000) Hz
2) 500 ㎨ |
소재지 |
| MIL STD-167-1A:2005 |
MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (exception)
-TYPE II |
1) (1 ~ 2 000) ㎐
2) 350 ㎨ 이하 |
소재지 |
| MIL STD-810F : 2000 |
ENVIRONMENTAL ENGINEERING
CONSIDERATIONS AND LABORATORY TESTS
METHOD 501.4 : High temperature
METHOD 502.4 : Low temperature
METHOD 503.4 : Temperature shock
METHOD 507.4 : Humidity
METHOD 509.4 : Salt Fog,
METHOD 514.5 : Vibration (exception) -Procedure Ⅱ,Ⅲ
METHOD 516.5 : Shock (exception) -Procedure Ⅱ,Ⅲ,Ⅴ ~ Ⅷ
METHOD 518 : Acidic atmosphere
METHOD 519.5 : Gunfire Vibration |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H.
3) (4 ~ 2 000) Hz
4) (1 ~ 980) ㎨
5) (1 ~ 30) ms
6) (1 ~ 1 500) mm
7) pH : (3 ~ 7.2)
8) NaCl : (5 ± 1) % |
소재지 |
MIL STD-810G
w/Change 1 : 2014 |
ENVIRONMENTAL ENGINEERING
CONSIDERATIONS AND LABORATORY TESTS
METHOD 501.6 : High temperature
METHOD 502.6 : Low temperature
METHOD 503.6 : Temperature shock
METHOD 507.6 : Humidity
METHOD 509.6 : Salt Fog
METHOD 514.7 : Vibration (exception) -Procedure Ⅱ,Ⅲ
METHOD 516.7 : Shock (exception) -Procedure Ⅱ,Ⅲ,Ⅴ ~ Ⅷ
METHOD 518.2 : Acidic Atmosphere
METHOD 519.7 : Gunfire Shock |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H.
3) (4 ~ 2 000) Hz
4) (1 ~ 980) ㎨
5) (1 ~ 30) ms
6) (1 ~ 1 500) mm
7) pH : (3 ~ 7.2)
8) NaCl : (5 ± 1) % |
소재지 |
| MIL STD-810G : 2008 |
ENVIRONMENTAL ENGINEERING
CONSIDERATIONS AND LABORATORY TESTS
METHOD 501.5: High Temperature
METHOD 502.5: Low Temperature
METHOD 503.5: Temperature Shock
METHOD 507.5: Humidity
METHOD 509.5: Salt Fog ,
METHOD 514.6: Vibration (exception)
-Procedure Ⅱ, Ⅲ
METHOD 516.6: Shock
(exception)
-Procedure Ⅱ, Ⅲ, Ⅴ ~ Ⅷ
METHOD 518.1: Acidic Atmosphere
METHOD 519.6 Gunfire Shock |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H.
3) (4 ~ 2 000) Hz
4) (1 ~ 980) ㎨
5) (1 ~ 30) ms
6) (1 ~ 1 500) mm
7) pH : (3 ~ 7.2)
8) NaCl : (5 ± 1) % |
소재지 |
| MIL STD-810H:2019 |
ENVIRONMENTAL ENGINEERING
CONSIDERATIONS AND LABORATORY TESTS
METHOD 501.7 : High Temperature
METHOD 502.7 : Low Temperature
METHOD 503.7 : Temperature Shock
METHOD 507.6 : Humidity
METHOD 509.7 : Salt Fog
METHOD 514.8 : Vibration (exception) -Procedure Ⅱ,Ⅲ
METHOD 516.8 : Shock (exception) -Procedure Ⅱ,Ⅲ,Ⅴ ~ Ⅷ
METHOD 518.2 Acidic Atmosphere
METHOD 519.8 : Gunfire Shock |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H.
3) (4 ~ 2 000) Hz
4) (1 ~ 980) ㎨
5) (1 ~ 30) ms
6) (1 ~ 1 500) mm
7) pH : (3 ~ 7.2)
8) NaCl : (5 ± 1) % |
소재지 |
| RTCA/DO-160G : 2010 |
Environment Conditions and Test Procedures for Airbone Equipment Section 4 : Tempreature and Altitude (exception) 4.6 Altitude, Decompression and Overpressure Tests
Section 5 : Temperature variation
Section 6 : Humidity
Section 7 : Operational Shocks and Crash Safety
Section 8 : Vibration
Section 14 : Salt Spray |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H.
3) (4 ~ 2 000) Hz
4) (1 ~ 980) ㎨
5) (1 ~ 30) ms
6) (1 ~ 1 500) mm
7) pH : (6.5 ~ 7.2)
8) NaCl : (5 ± 1) % |
소재지 |
| VW 80000:2017 |
Electric and Electronic Components in Motor Vehicles up to 3.5 t General Requirements, Test Conditions and Tests
10.1 M-01 Free fall
10.4 M-04 Vibration test
10.5 M-05 Mechanical shock
11.1 K-01 High-/low- temperature aging
11.2 K-02 Incremental temperature test
11.3 K-03 Low temperature operation
11.4 K-04 Repainting temperture
11.5 K-05 Thermal shock (component)
11.6 K-06 Salt spray test with operation, exterior
11.7 K-07 Salt spray test with operation, interior
11.8 K-08 Damp heat, cyclic
11.9 K-09 Damp heat, cyclic (with frost)
11.12 K-12 Thermal shock with splash water
11.16 K-16 Thermal shock (without housing) |
1) (-60 ~ 150) ℃
2) (50 ~ 95) % R.H.
3) Nacl : (5 ± 1) %
4) PH : (6.5 ~ 7.2)
5) (1 ± 0.001) m
6) (5 ~ 2 000) ㎐
7) (1 ~ 600) ㎨
8) (1 ~ 30) ms |
소재지 |
| IEC 60068-2-11:2021 |
Environmental testing-part 2-11: Tests-Test Ka: Salt mist |
1) (20 ~ 50) ℃
2) Nacl : (5 ± 1) %
3) PH : (6.5 ~ 7.2) |
소재지 |
| IEC 60068-2-27:2008 |
Environmental testing-part 2-27: Tests-Test Ea and guidance:Shock |
1) (10 ~ 500) ㎨
2) (1 ~ 30) ms |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경시험 - 제2-30부: 시험 - 시험 Db와 지침: 주기적 내습(12 h + 12 h 주기) |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H. |
소재지 |
| MIL-STD-810H w/Change 1:2022 |
ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
METHOD 501.7 : High Temperature
METHOD 502.7 : Low Temperature
METHOD 503.7 : Temperature Shock
METHOD 507.6 : Humidity
METHOD 509.8 : Salt Fog / Corrosive Environments
METHOD 514.8 : Vibration (exception) -Procedure Ⅱ,Ⅲ
METHOD 516.8 : Shock (exception) -Procedure Ⅱ,Ⅲ,Ⅴ ~ Ⅷ
METHOD 518.2 Acidic Atmosphere
METHOD 519.8 : Gunfire Shock |
1) (-60 ~ 150) ℃
2) (20 ~ 95) % R.H.
3) (4 ~ 2 000) Hz
4) (1 ~ 980) ㎨
5) (1 ~ 30) ms
6) (1 ~ 1 500) mm
7) pH : (3 ~ 7.2)
8) NaCl : (5 ± 1) % |
소재지 |
