| ▶ 금속 및 관련제품 |
| KS D 6701:2018 |
알루미늄 및 알루미늄 합금의 판 및 띠
〈적용〉
7.2 인장 시험
7.3 굽힘 시험 |
최대하중 : 90 kN |
소재지 |
| KS B 0802:2003 |
금속 재료 인장 시험 방법
<제외>
7.d) 내력 |
최대하중 : 90 kN
단면수축률 :
(0 ~ 80) % |
소재지 |
| KS B 0804:2001 |
금속 재료 굽힘 시험
〈적용〉
4.1 받침과 심봉으로 구성된 굽힘 장치 |
최대하중 : 90 kN |
소재지 |
| KS B 0811:2003 |
금속 재료의 비커스 경도 시험 방법 |
시험하중 :
(0.098 ~ 9.807) N |
소재지 |
| ▶ 전기재료 및 부품 |
| KC 62133-2:2025 |
휴대기기용 밀폐 리튬이차전지 안전
[제외]
7.2.1 정전압 연속 충전 시험(단전지)
7.3.1 외부 단락 시험(단전지)
7.3.4 열적 가혹 시험(단전지)
7.3.5 압착 시험(단전지)
7.3.7 강제방전 시험(단전지)
7.3.9 강제 내부 단락 시험(단전지)
D.2 동전모양 단전지에 대한 내부 AC 저항 측정 |
전압: (0.0 ~ 40.0) V DC
전류: (-75 ~ +75) A DC
온도: (-40 ~ +130) ℃
주파수: (7 ~ 200) Hz |
소재지 |
| IEC 62133-2:2017+AMD1:2021 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes
– Safety requirements for portable sealed secondary cells, and for batteries
made from them, for use in portable applications – Part 2: Lithium systems
[Exception]
7.2.1 Continuous charge (cells)
7.3.1 External short-circuit (cells)
7.3.4 Thermal abuse (cells)
7.3.5 Crush (cells)
7.3.7 Forced discharge(cells)
7.3.9 Forced internal short circuit (cells)
D.2 Measurement of the internal AC resistance for coin cells |
Voltage: (0.0 ~ 40.0) V DC
Current: (-75 ~ +75) A DC
Temperature: (-40 ~ +130) ℃
Frequency: (7 ~ 200) Hz |
소재지 |
| EN 62133-2:2017/A1:2021 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes
– Safety requirements for portable sealed secondary cells, and for batteries
made from them, for use in portable applications – Part 2: Lithium systems
[Exception]
7.2.1 Continuous charge (cells)
7.3.1 External short-circuit (cells)
7.3.4 Thermal abuse (cells)
7.3.5 Crush (cells)
7.3.7 Forced discharge(cells)
7.3.9 Forced internal short circuit (cells)
D.2 Measurement of the internal AC resistance for coin cells |
Voltage: (0.0 ~ 40.0) V DC
Current: (-75 ~ +75) A DC
Temperature: (-40 ~ +130) ℃
Frequency: (7 ~ 200) Hz |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 62368-1:2023 |
Audio/video,
information and
communication
technology
equipment-part1:Safety requirements
[Exception]
4.1.8 Liquids, refrigerants and liquid filled components (LFCs)
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
7 Injury caused by hazardous substances
10 Radiation
Annex C
UV radiation
Annex G.7 Mains power supply cords and interconnection cables
Annex G.8.2.3 Temporary overvoltage test
Annex G.13.6 Tests on coated printed boards
Annex J
Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of
rechargeable batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S
Tests for resistance to heat and fire
Annex U
Mechanical strength of CRTs and protection
against the effects of implosion
Annex Y.2 Resistance to UV radiation
Annex Y.4 Gaskets |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| KC 62368-1:2025 |
오디오/비디오 및 정보통신기술기기 제1부: 안전 요구 사항
[제외]
4.1.8 액체 및 액체 충전 부품(LFC)
5.4.1.10.2 연화온도(vicat) 시험
5.4.3.3 재질 그룹 및 비교 트래킹 지수(CTI)
5.4.4.6.5 맨드릴(mandrel) 시험
7 유해물질에 의한 상해
10 방사(선)
부속서 C 자외선(UV radiation)
부속서 G.5.3.4 FIW(완전 절연 권선) 을 사용한 변압기
부속서 G.7 주전원 코드
부속서 G.8.2.3 일시적인 과도 과전압 시험
부속서 G.13.6 코팅 인쇄기판
부속서 J 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R 제한 단락 회로 시험
부속서 S 내열 및 내화성 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y.2 자외선에 대한 내성
부속서 Y.4 개스킷 |
1. 시험 전압:
-단상: 최대
AC/DC 600 V,
-3상: 최대
AC 380 V,
2. 전류: 최대 20 A,
3. 주파수: 최대 60 Hz,
4. 온도: 최대 200 ℃,
5. 절연저항:
최대 99.9 GΩ
6. 습도: 최대 95 % R.H.
7. 무게: 최대 100 kg
8. 내전압: 최대 5 kV
9. 누설전류: 최대 10 mA
10. 토오크: 최대 10 N.m |
소재지 |
| IEC 62368-1:2018 |
Audio/video,
information and
communication
technology
equipment-part1:Safety requirements
[Exception]
4.1.8 Liquids and liquid filled components (LFC)
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
7 Injury caused by hazardous substances
10 Radiation
Annex C
UV radiation
Annex G.7 Mains supply cords
Annex G.8.2.3 Temporary overvoltage test
Annex G.13.6 Tests on coated printed boards
Annex J
Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of
batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S
Tests for resistance to heat and fire
Annex U
Mechanical strength of CRTs and protection
against the effects of implosion
Annex Y.2 Resistance to UV radiation
Annex Y.4 Gaskets |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| EN 62368-1:2014+A11:2017 |
Audio/video,
information and
communication
technology
equipment-part1:Safety requirements
[Exception]
4.1.8 Conductive liquids
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
7 Injury caused by hazardous substances
10 Radiation
Annex C
UV radiation
Annex G.7 Mains supply cords
Annex G.8.3.3 Temporary overvoltage test
Annex G.13.6 Tests on coated printed boards
Annex J
Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of
batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S
Tests for resistance to heat and fire
Annex U
Mechanical strength of CRTs and protection
against the effects of implosion |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| IEC 62368-1:2014 |
Audio/video,
information and
communication
technology
equipment-part1:Safety requirements
[Exception]
4.1.8 Conductive liquids
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
7 Injury caused by hazardous substances
10 Radiation
Annex C
UV radiation
Annex G.7 Mains supply cords
Annex G.8.3.3 Temporary overvoltage test
Annex G.13.6 Tests on coated printed boards
Annex J
Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of
batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S
Tests for resistance to heat and fire
Annex U
Mechanical strength of CRTs and protection
against the effects of implosion |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| EN IEC 62368-1:2020+A11:2020 |
Audio/video,
information and
communication
technology
equipment-part1:Safety requirements
[Exception]
4.1.8 Liquids and liquid filled components (LFC)
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
7 Injury caused by hazardous substances
10 Radiation
Annex C
UV radiation
Annex G.7 Mains supply cords
Annex G.8.2.3 Temporary overvoltage test
Annex G.13.6 Tests on coated printed boards
Annex J
Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of
batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S
Tests for resistance to heat and fire
Annex U
Mechanical strength of CRTs and protection
against the effects of implosion
Annex Y.2 Resistance to UV radiation
Annex Y.4 Gaskets |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| EN IEC 62368-1:2024 |
Audio/video,
information and
communication
technology
equipment-part1:Safety requirements
[Exception]
4.1.8 Liquids, refrigerants and liquid filled components (LFCs)
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
7 Injury caused by hazardous substances
10 Radiation
Annex C
UV radiation
Annex G.7 Mains power supply cords and interconnection cables
Annex G.8.2.3 Temporary overvoltage test
Annex G.13.6 Tests on coated printed boards
Annex J
Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of
rechargeable batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S
Tests for resistance to heat and fire
Annex U
Mechanical strength of CRTs and protection
against the effects of implosion
Annex Y.2 Resistance to UV radiation
Annex Y.4 Gaskets |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| IEC 62368-3:2017 |
Audio/video,
information and
communication
technology equipment
Part 3: Safety aspects for
DC power transfer
through communication
cables and ports |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| EN IEC 62368-3:2020 |
Audio/video,
information and
communication
technology equipment
Part 3: Safety aspects for
DC power transfer
through communication
cables and ports |
1. Test voltage:
-1 phase: Max. AC/DC 600 V,
- 3 phase: Max. AC 380 V,
2. Current: Max. 20 A,
3. Frequency: Max. 60 Hz,
4. Temperature:
Max. 200 ℃,
5. Insulation resistance: Max. 99.9 GΩ
6. Humidity: Max. 95 % R.H.
7. Mass: 100 kg
8. Dielectric strength: Max. 5 kV
9. Leakage current: Max. 10 mA
10. Torque: Max. 10 N.m |
소재지 |
| IEC 62684 edition 1.0:2011 |
Interoperability specifications of common external power supply(EPS) for use with data-enabled mobile telephones
6.2 D) common-mode noise probe |
Test voltage: DC 20 V |
소재지 |
| IEC 62684:2018 RLV |
Interoperability specifications of common external power supply(EPS) for use with data-enabled mobile telephones |
Test voltage: DC 20 V |
소재지 |
| EN IEC 62684:2018 |
Interoperability specifications of common external power supply(EPS) for use with data-enabled mobile telephones |
Test voltage: DC 20 V |
소재지 |
| ▶ 에너지효율 |
| EN 50564:2011 |
Electrical and electronic household and office equipment- Measurement of low power consumption
three phase product |
교류 및 직류 입출력 전력: (0.3 W ~ 500) W |
소재지 |
| KS C IEC 62301:2011 |
가정용 전기기기의 대기전력 측정방법 |
교류 및 직류 입출력 전력: (0.1 W ~ 300) W |
소재지 |
| 기후에너지환경부 고시 제2026-25호 (2026.01.23) |
대기전력저감 프로그램 운용규정
3. 프린터
5. 복사기
6. 스캐너
8. 자동절전제어장치
10. 오디오
11. DVD플레이어
12. 라디오카세트
13. 전자레인지
15. 도어폰
16. 유무선전화기
20. 손건조기
21. 서버 |
3. 프린터: 3 000 W 이하
5. 복사기: 5 000 W 이하
6. 스캐너: 1 000 W 이하
8. 자동절전제어장치:- 10. 오디오: 1 000 W 이하
11. DVD플레이어: 150 W 이하
12. 라디오카세트: 1 000 W 이하
13. 전자레인지: 4 000 W 이하
15. 도어폰: 100 W 이하
16. 유무선전화기: 150 W 이하
20. 손건조기: 3 000 W 이하
21. 서버: - |
소재지 |
| 기후에너지환경부 고시 제2026-26호 (2026.01.23) |
효율관리 기자재 운용규정
12. 선풍기
20. 어댑터, 충전기
49. 컴퓨터
50. 복합기 |
12. 선풍기: 날개지름 20 cm 이상 41 cm 이하
20. 어댑터, 충전기:
어댑터 출력전력: 150 W 이하,
충전기 입력전력: 20 W 이하
49. 컴퓨터: 데스크탑 컴퓨터, 모니터 일체형 데스크탑 컴퓨터, 노트북 컴퓨터
50. 복합기: - |
소재지 |
| EN 50563:2011+A1:2013 |
External a.c.- d.c. and a.c.- a.c. power supplies - Determination of no-load power and average efficiency of active modes
three phase product |
교류 및 직류 입출력 전력: (0.3 ~ 300) W |
소재지 |
| KS C IEC 62018:2003 |
정보 기술 기기의 소비 전력- 측정 방법 |
입력 전압: 400 V 이하
입력 주파수: (50/60) Hz |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 61373:2010 |
Railway applications - Rolling stock equipment-Shock and vibration tests |
Vibration Frequency range:
(1 ~ 500) Hz
Vibration Acceleration:
(0.37 ~ 144) m/s²
Shock Acceleration:
(30 ~ 1 000) m/s²
Shock duration:
(6 ~ 30) ms |
소재지 |
| IEC 60068-2-11:2021 |
Basic environmental testing procedures- Part 2-11: Tests - Test Ka: Salt mist |
Temperature:
(35 ± 2) ℃
Salt solution:
(5 ± 1) %
Angle:
(20 ± 5)° |
소재지 |
| IEC 60068-2-27:2008 |
Environmental Testing-Part 2-27: Tests-Test Ea and guidance: Shock |
Shock Acceleration:
(50 ~ 3 000) m/s²
Shock duration:
(3 ~ 30) ms |
소재지 |
| IEC 60068-2-75:2014/AMD1:2025 |
Environmental testing - part 2-75: Tests - Test Eh : Hammer tests |
Energy :
(0.14 ~ 50) J |
소재지 |
| IEC 60068-2-53:2010 |
Environmental testing-Part2 –53:Tests and guidance-Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests |
Temperature/Humidity:
(-40 ~ 150) ℃ /
(60 ~ 96) % R.H.
Vibration Frequency range:
(1 ~ 2 000) Hz
Vibration Acceleration:
(1 ~ 500) m/s²
Shock Acceleration:
(50 ~ 1 500) m/s²
Shock duration:
(3 ~ 30) ms |
소재지 |
| IEC 61373:2010 |
Railway applications-Rolling stock equipment-Shock and vibration tests |
Vibration Frequency range:
(1 ~ 500) Hz
Vibration Acceleration:
(0.37 ~ 144) m/s²
Shock Acceleration:
(30 ~ 1 000) m/s²
Shock duration:
(6 ~ 30) ms |
소재지 |
| KS C 7620:2003 |
철도 차량용 형광등 기구
<제외>
7.11 광속비 시험
7.13 잡음의 세기 시험 |
온도: (0 ~ 55) ℃
절연저항: DC 500 V
Vdc: (0 ~ 130)
진동주파수: 10 Hz |
소재지 |
| KS C IEC 60068-2-27:2008 |
환경 시험-제2-27부: 시험-시험 Ea와 지침: 충격 시험 |
진동가속도:
(50 ~ 1 000) m/s²
펄스지속시간:
(3 ~ 30) ms |
소재지 |
| KS C IEC 60068-2-11:2021 |
환경시험 - 제 2-11부: 시험- 시험 Ka: 염수분무시험 |
온도 :
(35 ± 2) ℃
염용액농도 :
(5 ± 1) %
각도 :
(20 ± 5)° |
소재지 |
| KS C IEC 60068-2-53:2010 |
환경 시험 — 제2-53부: 시험 — 시험 및 지침: 기후(온도/습도) 및 동적(진동/충격) 결합 시험 |
온/습도:
(-40 ~ 150) ℃/
(60 ~ 96) %R.H.
진동주파수:
(1 ~ 2 000) Hz
진동가속도:
(1 ~ 500) m/s²
충격가속도:
(50 ~ 1 500) m/s²
충격지속시간:
(3 ~ 30) ms |
소재지 |
| KS C IEC 60068-2-75:2014 |
환경시험 - 제 2-75부: 시험 - 시험 Eh: 해머 시험 |
에너지:
(0.14 ~ 50) J |
소재지 |
| IEC 60571:2012 |
Railway applications- Electronic equipment used on rolling stock
5.1 Power supply
5.2 Supply overvoltages
12.2.4 Cold start test
12.2.5 Dry heat test
12.2.6 Damp heat test, cyclic
12.2.7 Supply overvoltage
12.2.8 Surges, electrostatic discharge (ESD) and transient burst susceptibility tests
12.2.10 Insulation test
12.2.11 Salt mist test
12.2.12 Vibration, shock and bump test
12.2.15 Low temperature storage test |
Over Voltage (AC/DC): 300 V
Surge: ± 2 ㎸
ESD: ± 8 ㎸
EFT: ± 2 ㎸
Temperature:
(-70 ~ 200) ℃
Temperature / Humidity:
(25 ~ 55) ℃ /
(60 ~ 95) % R.H.
Insulation resistance:
DC 500 V
Voltage withstand:
MAX. AC 1 500 V
Salt mist:
(35 ± 2) ℃,
NaCl(5 ± 1) %
Vibration Frequency:
(1 ~ 500) Hz
Vibration acceleration:
(0.37 ~ 144) m/s²
Shock Acceleration:
(30 ~ 1 000) m/s²
Shock duration:
(6 ~ 30) ms |
소재지 |
| KS R 1034:2023 |
자동차 부품 진동 시험 방법 |
진동주파수:
(1 ~ 2 000) Hz
진동가속도:
(4.9 ~ 490) m/s² |
소재지 |
| KS R 9197:2022 |
철도 차량의 절연 저항 및 내전압 시험 방법 |
내전압:
AC 1 200 V 이하
절연저항:
DC 500 V |
소재지 |
| KS C IEC 60601-1-11:2020 |
의료용 전기기기 ─ 제1-11부: 기본안전 및 필수성능에 관한 일반 요구사항 ─ 보조표준: 홈헬스케어 환경에서 사용되는 의료용 전기기기와 의료용 전기 시스템에 관한 요구사항
<적용>
10.1.2 - 비 이동 작동형 의료용 전기기기(ME기기)에 대한 기계적 강도에 대한 요구사항
10.1.3 – 이동 작동형 의료용 전기기기(ME기기)에 대한 기계적 강도에 대한 요구사항 |
진동주파수:
(10 ~ 2 000) Hz
충격가속도:
(1.0 ~ 300) m/s²
충격지속시간:
(6 ~ 11) ms |
소재지 |
| MIL-STD-167-1A:2005 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD Mechanical Vibrations of Shipboard Equipment
(TYPE Ⅰ-ENVIRONMENTAL AND TYPE Ⅱ- INTERNALLY EXCITED) |
Frequency range:
(4 ~ 33) Hz
Acceleration:
(0.98 ~ 980) m/s²
Amplitude:
(0.254 ~ 0.508) mm |
소재지 |
| MIL-STD-810F NOTICE 3:2003 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
Method 500.4 Low Pressure(Altitude)
Method 501.4 High temperature
Method 502.4 Low temperature
Method 503.4 Temperature Shock
Method 507.4 Humidity
Method 509.4 Salt Fog
Method 512.4 IMMERSION
Method 516.5 Shock
Method 514.5 Vibration
ANNEX A
2.2.2 Category 5 - Truck/trailer/tracked - loose cargo.
2.2.3 Category 6 - Truck/trailer/tracked - large assembly cargo. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| MIL-STD-810G w/Change 1:2014 |
DEPARTMENT OF DEFENSE
Test Method Standard Environmental Engineering
Considerations and Laboratory Tests
Method 500.6 Low Pressure(Altitude)
Method 501.6 High temperature
Method 502.6 Low temperature
Method 503.6 Temperature Shock
Method 507.6 Humidity
Method 509.6 Salt Fog
Method 512.6 IMMERSION
Method 516.7 Shock
Method 514.7 Vibration
ANNEX C
2.2 Category 5 - Truck/trailer - loose cargo.
2.3 Category 6 - Truck/trailer - large assembly transport. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| KS C IEC 60068-2-38:2021 |
환경 시험 — 제2-38부: 시험 — 시험 Z/AD: 복합 온도/습도 사이클 시험 |
온/습도:
(-10 ~ 65) ℃ /
(60 ~ 93) % R.H. |
소재지 |
| KS C IEC 60068-2-52:2017 |
환경 시험 — 제2-52부: 시험 — 시험 Kb: 염수분무, 사이클(염화소듐 용액) |
온도: (35 ± 2) ℃,
염용액농도:
(5 ± 1) %
온/습도:
(23 ~ 60) ℃ /
(45 ~ 96) % R.H. |
소재지 |
| MIL-STD-810C:1981 |
ENVIRONMENTAL TEST METHODS
Method 500.1 Low Pressure(Altitude)
Method 501.1 High temperature
Method 502.1 Low temperature
Method 503.1 Temperature Shock
Method 507.1 Humidity Method 509.1 Salt Fog
Method 512.1 IMMERSION
Method 514.2 Vibration
Method 516.2 Shock |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| KS D 9502:2024 |
염수 분무 시험방법(중성, 아세트산 및 캐스분무 시험)
<적용>
11.1 중성 염수 분무 시험 |
Temperature range:
(35 ± 2) ℃
NaCl: (5 ± 1) %
pH: (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60255-21-2:1988 |
전기 계전기 — 제21-2부: 보호 계전기와 보호 기기의 진동, 충격, 충돌, 지진 시험 — 지진 시험 |
Shock acceleration:
(5 ~ 30) m/s²
Shock duration:
(11 ~ 16) ms |
소재지 |
| KS C IEC 61757-2-2:2016 |
광섬유 센서 - 제 2-2부: 온도 측정 - 분포형 센싱 |
Temperature:
(-70 ~ 150)℃ |
소재지 |
| KS C IEC 60068-2-1:2007 |
환경 시험 - 제2-1부: 시험-시험 A: 내한성 시험 |
온도: (-65 ~ 5) ℃ |
소재지 |
| IEC 60601-1-11:2015/AMD1:2020 |
Medical electrical equipment-Part1-11:General requirements for basic safety and essential performance-Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home health care environment
10.1.2* Requirements for mechanical strength for non-TRANSIT-OPERABLE ME EQUIPMENT
10.1.3* Mechanical strength requirements for mobile-operated medical electrical devices(ME devices) |
Vibration Frequency:
(10 ~ 2 000) Hz
Vibration acceleration:
(0.5 ~ 1.0) (m/s²)²/Hz
Shock acceleration :
(1.0 ~ 1 000) m/s²
Shock duration :
(6 ~ 11) ms
Drop heights:
MAX. 0.25 m |
소재지 |
| KS C IEC 60529:2013 |
외함의 밀폐 보호등급 구분(IP코드)
<제외>
14.2.9 고압 및 고온 물분사 제트에 의한 제2 특성 숫자 9 시험 |
IP00 - IP68 |
소재지 |
| KS C IEC 60068-2-61:1991 |
환경 시험 — 제2-61부: 시험방법 — 시험 Z/ABDM: 일련 내후성 |
Temperature:
(-65 ~ 150)℃
Humidity:
(45 ~ 95) % R.H
Pressure: min 10 kPa |
소재지 |
| KS C IEC 60068-2-13:2021 |
환경 시험 - 제2-13부: 시험 - 시험 M: 저기압 |
Pressure: min 10 kPa |
소재지 |
| IEC 60529:1989 +A1:1999+A2:2013 |
Degrees of protection provided by enclosures (IP code)
14.2.9 Test for second characteristic numeral 9 by high pressure and temperature water jetting |
IP00 - IP68 |
소재지 |
| EN 60068-2-30:2005 |
Environmental testing. Tests. Test Db and guidance: Damp heat, cyclic (12 h + 12 h cycle). |
Temperature/ Humidity:
(25 ~ 55) ℃ /
(60 ~ 96) % R.H. |
소재지 |
| EN 50155:2021 |
Railway applications-Rolling stock-Electronic equipment
5.1 Power supply
5.2 Supply overvoltages
13.4.3 Power Supply test
13.4.4 Low temperature start-up test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Cyclic damp heat test
13.4.9 Insulation test
13.4.10 Salt mist test
13.4.11 Vibration and shock test
13.4.12 Enclosure protection test (IP code)
13.4.13 Stress screening test
13.4.14 Rapid Temperature variation test |
Over Voltage (AC/DC): 300 V
Temperature:
(-70 ~ 200)℃
Temperature / Humidity:
(25 ~ 55) ℃ /
(60 ~ 95) % R.H.
Insulation resistance:
DC 500 V
Voltage withstand:
MAX. AC 1 500 V or
MAX. DC 2 200 V
Salt Fog: (35 ± 2) ℃,
NaCl: (5 ± 1) %
Vibration Acceleration:
(0.37 ~ 144) m/s²
Vibration Frequency range: (1 ~ 500) Hz
Shock Acceleration:
(30 ~ 1 000) m/s²
Shock duration:
(6 ~ 30) ms
IP 00 - IP 68 |
소재지 |
| MIL-STD-810G:2008 |
DEPARTMENT OF DEFENSE Test Method Standard Environmental Engineering Considerations and Laboratory Tests
Method 500.5 Low Pressure(Altitude)
Method 501.5 High temperature
Method 502.5 Low temperature
Method 503.5 Temperature Shock
Method 507.5 Humidity
Method 509.5 Salt Fog
Method 512.5 IMMERSION
Method 516.6 Shock
Method 514.6 Vibration
ANNEX C
2.2 Category 5 - Truck/Trailer/Tracked - Loose Cargo.
2.3 Category 6 - Truck/Trailer/Tracked - Large Assembly Cargo. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| IEC 60068-2-30:2025 |
Environmental testing-Part 2-30: Tests- Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Temperature / Humidity:
(25 ~ 55) ℃ /
(60 ~ 96) % R.H. |
소재지 |
| IEC 60068-2-31:2008 |
Environmental Testing-Part 2-31: Tests-EC: Rough handling shocks, primarily for equipment-type specimens |
Max fall heights:
1 500 mm |
소재지 |
| IEC 60068-2-38:2021 |
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
Temperature / Humidity:
(-10 ~ 65) ℃ /
(60 ~ 93) % R.H. |
소재지 |
| IEC 60068-2-52:2017 |
Environmental testing - Part 2-52: Tests -Test Kb: Salt mist, cyclic (sodium chloride solution) |
Temperature:
(35 ± 2) ℃
Salt solution:
(5 ± 1) %
Temperature / Humidity:
(23 ~ 55) ℃ /
(45 ~ 95) % R.H. |
소재지 |
| IEC 60068-2-6:2007 |
Environmental Testing-Part 2-6: Tests-Test Fc: Vibration(Sinusoidal) |
Vibration Frequency range:
(1 ~ 2 000) Hz,
Vibration Acceleration:
(1 ~ 500) m/s² |
소재지 |
| IEC 60068-2-64:2008/AMD1:2019 |
Environmental Testing-Part 2-64: Tests-Test Fh: Vibration, broadband random and guidance |
Vibration Frequency range:
(1 ~ 2 000) Hz
Vibration Acceleration:
(1.1 ~ 270) m/s² |
소재지 |
| IEC 60068-2-67:1995/AMD1:2019 |
Environmental Testing-Part 2: Tests-Test Cy: Damp heat, steady state, accelerated test primarily intended for components |
Temperature / Humidity:
85 ℃ / 85 % R.H. |
소재지 |
| IEC 60068-2-78:2025 |
Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state |
Temperature / Humidity:
(30 ~ 40) ℃ /
(85 ~ 93) % R.H. |
소재지 |
| IEC 62262:2002/AMD1:2021 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
Energy:(0.14 ~ 50) J |
소재지 |
| KS C IEC 60571:2012 |
철도 적용 — 철도 차량용 전자기기
<적용>
5.1 전원 공급
5.2 공급 과전압
12.2.4 냉각 시험
12.2.5 내열성 시험
12.2.6 내습 사이클 시험
12.2.7 공급 과전압
12.2.8 서지 (Surge), 정전기 방전 (ESD) 및 과도 버스트 민감성 시험
12.2.10 절연 시험
12.2.11 염수 분무 시험
12.2.12 진동, 충격 및 충돌시험
12.2.15 저온 저장 시험 |
Over Voltage (AC/DC): 300 V
Surge: ± 2 ㎸
ESD: ± 8 ㎸
EFT: ± 2 ㎸
온도: (-70 ~ 200) ℃
온·습도: (25 ~ 55) ℃,
(60 ~ 95) % R.H
절연저항: DC 500 V
내전압: AC 1 500 V 이하
염용액: (35 ± 2) ℃,
NaCl(5 ± 1) %
진동주파수:
(1 ~ 500) Hz
진동가속도:
(0.37 ~ 144) m/s²
충격 가속도:
(30 ~ 1 000) m/s²
충격지속시간:
(6 ~ 30) ms |
소재지 |
| EN 60068-2-2:2007 |
Environmental Testing - Part 2-2: Tests - Test B : Dry heat |
Temperature:
(30 ~ 200) ℃ |
소재지 |
| EN 60068-2-6:2008 |
Environmental Testing-Part 2-6: Tests-Test Fc: Vibration(Sinusoidal) |
Vibration Frequency range:
(1 ~ 2 000) Hz,
Vibration Acceleration:
(1 ~ 500) m/s² |
소재지 |
| IEC 60068-2-1:2025 |
Environmental Testing-Part 2-1: Tests-Test A: Cold |
Temperature:
(-65 ~ 5) ℃ |
소재지 |
| IEC 60068-2-14:2023 |
Environmental testing-Part 2-14: Tests-Test N: Change of temperature
9.3 Test Nc: Rapid change of temperature, tow-fluid-bath method |
Temperature:
(-65 ~ 200) ℃ |
소재지 |
| IEC 60068-2-2:2025 |
Environmental Testing - Part 2-2: Tests - Test B: Dry heat |
Temperature:
(30 ~ 200) ℃ |
소재지 |
| KS R 9193:2022 |
철도 신호 보안 부품의 절연 저항 및 내전압 시험 방법 |
내전압:
AC 5 000 V 이하
절연저항:
DC 500 V |
소재지 |
| MIL-STD-810F:2000 |
DEPARTMENT OF DEFENSE
Test Method Standard for Environmental
Engineering Considerations and Laboratory Tests
Method 500.4 Low Pressure(Altitude)
Method 501.4 High temperature
Method 502.4 Low temperature
Method 503.4 Temperature Shock
Method 507.4 Humidity
Method 509.4 Salt Fog
Method 512.4 IMMERSION
Method 516.5 Shock
Method 514.5 Vibration
ANNEX A
2.2.2 Category 5 - Truck/trailer/tracked - loose cargo.
2.2.3 Category 6 - Truck/trailer/tracked - large assembly cargo. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| MIL-STD-810E:1989 |
ENVIRONMENTAL TEST METHODS AND ENGINEERING GUIDELINES
Method 500.3 Low Pressure(Altitude)
Method 501.3 High temperature
Method 502.3 Low temperature
Method 503.3 Temperature Shock
Method 507.3 Humidity Method 509.3 Salt Fog
Method 512.3 IMMERSION
Method 516.4 Shock
Method 514.4 Vibration
SECTION II
II-1.2.2 Procedure II - Category 2 - Large assembly transport.
II-2.2 Procedure III - Category 3 - Loose cargo transport. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| MIL-STD-202G:2002 |
DEPARTMENT OF DEFENSE
Test Method Standard
Electronic and electrical Component Parts
Method 101E SALT ATMOSPHERE (CORROSION)
Method 103B HUMIDITY (STEADY STATE)
Method 106G MOISTURE RESISTANCE
Method 107G THERMAL SHOCK
Method 201A VIBRATION
Method 204D VIBRATION
HIGH FREQUENCY
2.2 Test condition A
Method 214A RANDOM VIBRATION
Method 301 DIELECTRIC WITHSTANDING VOLTAGE
Method 302 INSULATION RESISTANCE |
Salt Fog:
(35 ± 2) ℃ /
(5 ± 1) %
Temperature / Humidity:
40 ℃ /
(90 ~ 95) % R.H.
Temperature / Humidity:
(-10 ~ 65) ℃/
(80 ~ 95) % R.H.
Thermal shock:
(-65 ~ 200) ℃
Frequency range:
(10 ~ 55) Hz
Frequency range:
(5 ~ 2 000) Hz
Acceleration: 10 G
Random Vibration Frequency range:
(50 ~ 2 000) Hz
Dielectric withstanding voltage:
AC 5 kV or less.,
DC 6 kV or less.
Insulation resistance:
DC 1 kV or less. |
소재지 |
| MIL-STD-810H w/Change 1:2022 |
ENVIRONMENTAL TEST METHODS
Environmental engineering
considerations and laboratory tests
500.6 Low Pressure(Altitude)
501.7 High temperature
502.7 Low temperature
503.7 Temperature shock
507.6 Humidity
509.8 Salt Fog / Corrosive Environments
512.6 IMMERSION
516.8 Shock
514.8 Vibration
ANNEX C
2.2 Category 5 - Truck/trailer - loose cargo.
2.3 Category 6 - Truck/trailer - large assembly transport. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| IEC 60068-2-13:2021 |
Environmental testing –Part 2-13: Tests – Test M: Low air pressure |
Pressure: min 10 kPa |
소재지 |
| EN IEC 60068-2-1:2025 |
Environmental Testing-Part 2-1: Tests-Test A: Cold |
Temperature: (-65 ~ 5) ℃ |
소재지 |
| EN IEC 60068-2-2:2025 |
Environmental Testing - Part 2-2: Tests - Test B: Dry heat |
Temperature: (30 ~ 200) ℃ |
소재지 |
| EN IEC 60068-2-14:2023 |
Environmental testing-Part 2-14: Tests-Test N: Change of temperature
9 Test Nc: Rapid change of temperature, tow-fluid- bath method |
Temperature: (-65 ~ 200) ℃ |
소재지 |
| EN IEC 60068-2-30:2025 |
Environmental testing-Part 2-30: Tests- Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Temperature/
Humidity:
(25 ~ 55) ℃/(60 ~ 96) % R.H. |
소재지 |
| IEC 60255-21-1: 1988 |
Electrical relays Part 21:Vibration, shock, bump and seismic tests on measuring relays and protection equipment Section One — Vibration tests (sinusoidal) |
Vibration Frequency:
(10 ~ 150) Hz |
소재지 |
| IEC 60255-21-2:1988 |
Electrical relays Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment Section Two — Shock and bump tests |
Shock acceleration:
(5 ~ 30) m/s²
Shock duration:
(11 ~ 16) ms |
소재지 |
| IEC 60255-21-3:1993 |
Electrical relays —Part 21:Vibration, shock, bump and seismic tests on measuring relays and protection equipment — Section 3: Seismic tests
5 Requirements for biaxial multi-frequency random seismic test (method B) |
Vibration Frequency:
(1~35) hz
Vibration acceleration:
(0.5~2) g |
소재지 |
| KS C IEC 60255-21-3:1993 |
전기계전기 ― 제21-3부 : 보호계전기와 보호 기기의 진동, 충격, 충돌, 지진시험 ― 지진시험
<제외항목>
5 이축 다중-주파수 랜덤 지진 시험의 요구사항(방법 B) |
진동 주파수:
(1~35) hz
진동 가속도:
(0.5~2) g |
소재지 |
| EN 60068-2-14:2009 |
Environmental testing-Part 2-14: Tests-Test N: Change of temperature
9 Test Ne: Rapid change of temperature, two-fluid-bath method |
Temperature:
(-65 ~ 200) ℃ |
소재지 |
| KS C IEC 60068-2-6:2015 |
환경 시험 - 제2-6부: 시험-시험 Fc: 진동 (정현파) |
진동주파수:
(1 ~ 2 000) Hz
진동가속도:
(1 ~ 500) m/s² |
소재지 |
| MIL-STD-202H:2015 |
DEPARTMENT OF DEFENSE
Test Method Standard
Electronic and electrical Component Parts
Method -101 SALT ATMOSPHERE (CORROSION)
Method -103 HUMIDITY (STEADY STATE)
Method -106 MOISTURE RESISTANCE
Method -107 THERMAL SHOCK
Method -201 VIBRATION
Method -204 VIBRATION
HIGH FREQUENCY
2.2 Test condition A
Method -214 RANDOM VIBRATION
Method -301 DIELECTRIC WITHSTANDING VOLTAGE
Method -302 INSULATION RESISTANCE |
Salt Fog:
(35 ± 2) ℃ /
(5 ± 1) %
Temperature / Humidity :
40 ℃ /
(90 ~ 95) % R.H.
Temperature / Humidity:
(-10 ~ 65) ℃/
(80 ~ 95) % R.H.
Thermal shock:
(-65 ~ 200) ℃
Frequency range:
(10 ~ 55) Hz
Frequency range:
(5 ~ 2 000) Hz
Acceleration: 10 G
Random Vibration Frequency range :
(50 ~ 2 000) Hz
Dielectric withstanding voltage:
AC 5 kV or less
DC 6 kV or less
Insulation resistance:
DC 1 kV or less |
소재지 |
| 경찰청, 조명식 및 발광형 교통안전표지 표준지침:2018.11.26 |
조명식 및 발광형 교통안전표지 표준지침
<적용>
10.2.1 내후성시험
10.2.2 내수성시험
10.2.3 진동시험
10.2.4 충격시험
10.2.5 절연저항시험
10.2.6 내전압시험
10.2.7 소비전력, 역률, 총고조파 함유율 시험 |
저온: -34 ℃
고온: 74 ℃
내수성:
연직에서 60°, 600 s
진동
가속도: 0.5 g
복진폭: 0.76 ㎜
진동 주파수: (5 ~ 30) ㎐
충격량: (10 ± 1) g
절연저항: DC 500 V
내전압: 최대 AC 1 500 V
소비전력: 20 W이내
역률: 0.9 이상
총고조파함유: 40 % 이내 |
소재지 |
| MIL-STD-810H:2019 |
ENVIRONMENTAL TEST METHODS
Environmental engineering
considerations and laboratory tests
500.6 Low Pressure(Altitude)
501.7 High temperature
502.7 Low temperature
503.7 Temperature shock
507.6 Humidity
509.7 Salt Fog
512.6 IMMERSION
516.8 Shock
514.8 Vibration
ANNEX C
2.2 Category 5 - Truck/trailer - loose cargo.
2.3 Category 6 - Truck/trailer - large assembly transport. |
Pressure: min 0.5 kPa
Temperature range: (-70 ~ 200) ℃
Humidity:
(20 ~ 95) % R.H.
Salt Fog:
(35 ± 2) ℃, (5 ± 1) %
Immersion depth: 1.05 m
Vibration Frequency range: (1 ~ 2 000) Hz
Vibration acceleration:
(0.37 ~ 980) m/s²
Shock acceleration:
(30 ~ 1 500) m/s²
Shock duration:
(1 ~ 30) ms |
소재지 |
| KS T ISO 2248:1985 |
포장 — 수송포장 — 수직낙하 충격시험 |
낙하 최대높이: 760 mm |
소재지 |
| KS C IEC 60068-2-2:2007 |
환경 시험 - 제2-2부: 시험-시험 B: 내열성 시험 |
온도: (30 ~ 200) ℃ |
소재지 |
| KS C IEC 60068-2-31:2008 |
환경 시험 - 제2-31부: 시험-시험 Ec: 주로 장비형 시편에 사용하는 거친 취급시 충격 |
낙하 최대높이:
1 500 mm |
소재지 |
| KS C IEC 60068-2-64:2019 |
환경 시험 — 제2-64부: 시험 — 시험 Fh: 광대역 랜덤 진동 시험 및 지침 |
진동주파수:
(1 ~ 2 000) Hz
진동가속도:
(1.1 ~ 270) m/s² |
소재지 |
| KS C IEC 60068-2-67:2019 |
환경 시험 — 제2-67부: 시험 — 시험 Cy: 주로 부품을 대상으로 하는 습열, 정상 상태, 가속 시험 |
온/습도:
85 ℃ / 85 % R.H. |
소재지 |
| KS C IEC 60068-2-78:2012 |
환경 시험 - 제2-78부: 시험-시험Cab: 안정 상태의 내습성 시험 |
온/습도:
(30 ~ 40) ℃ /
(85 ~ 93) % R.H. |
소재지 |
| KS C IEC 60255-21-1:1988 |
전기 계전기 - 제21-1부: 보호계전기와 보호 기기의 진동, 충격, 충돌, 지진 시험-진동 시험 용어 |
진동주파수:
(10 ~ 150) Hz |
소재지 |
| KS C IEC 61373:2010 |
철도 - 철도차량 장치 - 충격 및 진동시험 |
진동주파수:
(1 ~ 500) Hz
진동가속도:
(0.37 ~ 144) m/s²
충격가속도:
(30 ~ 1 000) m/s²
충격지속시간:
(18 ~ 30) ms |
소재지 |
| KS C IEC 62262:2021 |
외부 기계적 충격에 대한 전기기기용 외함의 보호 등급 (IK 코드) |
에너지: (0.14 ~ 50) J |
소재지 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험 방법 |
진동주파수:
(1 ~ 70) Hz
진동가속도:
(4.90 ~ 490) m/s² |
소재지 |
| KS R 9186:2021 |
철도 신호 보안 부품 — 진동 시험방법
<제외>
9.2 진동기능시험 4종 |
진동주파수:
(10 ~ 1 000) Hz
진동가속도:
(4.9 ~ 981) m/s² |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경 시험 - 제2-30부: 시험 - 시험 Db와 지침: 주기적 내습(12 h+12 h 주기) |
온/습도:
(25 ~ 55) ℃ /
(60 ~ 96) % R.H. |
소재지 |
| KS C IEC 60068-2-14:2023 |
환경 시험 - 제2-14부: 시험-시험 N: 온도 변화
<제외>
9.3 시험 Nc:온도의급변(2욕조법) |
온도: (-65 ~ 200) ℃ |
소재지 |
| JASO D 001:1994 |
Automotive electronic equipment Standard General rules of environmental testing methods for automotive electronic equipment
5.7 Transient voltage characteristic test
5.8 Electrostatic test
5.9 Conducted electromagnetic test
5.10 Radiated electromagnetic test
5.21 Waterproofing Test
5.25 Dust Test
5.26 Oil resistance Test |
Temperature:
(-40 ~ 200) ℃
Temperature /
humidity:
(-40 ~ 125) ℃/
(45 ~ 96) % R.H.
SaltFog:(35 ± 2)℃
NaCl:(5 ± 1)%
Vibration Frequency range: (5 ~ 200) Hz
Vibration Acceleration:
(29.4 ~ 68.6) m/s²
Fall height:
1 000 mm |
소재지 |
| EN 60068-2-1:2007 |
Environmental Testing-Part 2-1: Tests-Test A: Cold |
Temperature:
(-65 ~ 5) ℃ |
소재지 |
| 한국도로공사:2009 |
통행료 자동지불시스템 단말기 물리규격
<적용>
6.3 전원ON/OFF시험
6.4 과전압시험
6.6 전원역극성시험
6.10 Smart Card 전원확인시험
7.1 낙하 충격 적합성시험
7.2 진동 시험
7.4 열충격 시험
7.5 고온 저장 후 전자카드 탈거시험
7.6 결로 시험
7.7 온도사이클 시험
7.8 고.저온 작동한계 시험 |
전압: (0 ~ 75) V
낙하높이: 1 000 mm
진동주파수:
(5 ~ 200) Hz
진동가속도: 29.4 m/s²
온도: (-40 ~ 85) ℃
습도:
(45 ~ 96) % R.H. |
소재지 |
| ISO 2248:1985 |
Packaging - Complete, filled transport packages -
Vertical impact test by dropping |
Max fall heights:
760 mm |
소재지 |
| KS C IEC 62498-3:2010 |
철도 적용 – 장비의 환경 조건 – 제3부 : 신호 및 통신용 장비 |
진동주파수:
(5 ~ 2 000) Hz
진동가속도:
(2.3 ~ 280) m/s²
충격가속도:
(20 ~ 2 500) m/s²
펄스 지속시간:
(1 ~ 11) ms |
소재지 |
| IEC 62498-3:2010 |
Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications |
Vibration Frequency range:
(1 ~ 2 000) Hz,
Vibration Acceleration:
(2.3 ~ 280) m/s²
Shock Acceleration:
(20 ~ 2 500) m/s²
Shock duration:
(1 ~ 11) ms |
소재지 |
