| ▶ 가정용 전기기기 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
5.4.3.3: Material group and CTI
5.6.4.1: Source with at least 1500A short circuit.
10: Radiation.
Annex C: UV radiation
Annex G.1: Switches test according to IEC 61058-1.
Annex G.2: Relays test according to IEC 61810-1.
Annex G.3.1: Thermal cut-offs, PTC thermistors test according to IEC 60730.
Annex G.3.2: Thermal links test according to IEC 60691.
Annex G.5.3.4: Test for FIW
Annex G.7: Mains supply cords (test equipment according to IEC 60227)
Annex G.8: Varistors test according to IEC 61051.
Annex G.9: IC current limiters.
Annex G.11: Capacitors test according to IEC 60384-14.
Annex G.12: Optocouplers test according to IEC 60747.
Annex G.13.6.2 Abrasion resistance test
Annex G.15: Tumbling and fittings compatibility test
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R: Limited Short-circuit test
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex U: Mechanical strength of CRTs and protection against the effects of implosion
Annex Y.2: Ultraviolet light conditioning test
Annex Y.3: Resistance to corrosion, water borne contaminants
Annex Y.3.3: Water- sulphur dioxide test
Annex Y.4.3: Tensile strength and elongation tests
Annex Y.4.4: Compression test
Annex Y.4.5: Oil resistance
Annex Y.5.3: Water spary test
Annex Y.5.5: Protection from excessive dust |
Power: single phase
Input: Max. 600 V, Max. 20 A
Frequency: (50/ 60) Hz
Humidity: Max. 95 % R.H.
Temperature: (0~300) ℃ |
부속시설-1 |
| EN IEC 62368-1:2020+A11:2020 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
5.4.3.3: Material group and CTI
5.6.4.1: Source with at least 1500A short circuit.
10: Radiation.
Annex C: UV radiation
Annex G.1: Switches test according to IEC 61058-1.
Annex G.2: Relays test according to IEC 61810-1.
Annex G.3.1: Thermal cut-offs, PTC thermistors test according to IEC 60730.
Annex G.3.2: Thermal links test according to IEC 60691.
Annex G.5.3.4: Test for FIW
Annex G.7: Mains supply cords (test equipment according to IEC 60227)
Annex G.8: Varistors test according to IEC 61051.
Annex G.9: IC current limiters.
Annex G.11: Capacitors test according to IEC 60384-14.
Annex G.12: Optocouplers test according to IEC 60747.
Annex G.13.6.2 Abrasion resistance test
Annex G.15: Tumbling and fittings compatibility test
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R: Limited Short-circuit test
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex U: Mechanical strength of CRTs and protection against the effects of implosion
Annex Y.2: Ultraviolet light conditioning test
Annex Y.3: Resistance to corrosion, water borne contaminants
Annex Y.3.3: Water- sulphur dioxide test
Annex Y.4.3: Tensile strength and elongation tests
Annex Y.4.4: Compression test
Annex Y.4.5: Oil resistance
Annex Y.5.3: Water spray test
Annex Y.5.5: Protection from excessive dust |
Power: single phase
Input: Max. 600 V, Max. 20 A
Frequency: (50/ 60) Hz
Humidity: Max. 95 % R.H.
Temperature: (0~300) ℃ |
부속시설-1 |
| KC 62368-1:2025 |
오디오/비디오 및 정보통신기술기기 제1부:안전 요구 사항
<제외항목>
Cl. 5.4.3.3 재질 그룹 및 비교 트래킹 지수(CTI)
Cl. 5.6.4.1: 보호 본딩 도체에 대한 요구사항 (부속서 R)
Cl. 10: 방사(선)
부속서 C: 자외선(UV radiation)
부속서 G.1: IEC 610580-1에 따른 스위치 시험
부속서 G.2: IEC 61810-1에 따른 릴레이 시험
부속서 G.3.1: IEC 60730에 따른 온도과승방장치, PTC 시험
부속서 G.3.2: IEC 60691에 따른 온도 휴즈 시험
부속서 G.5.3.4: FIW(완전 절연 권선)을 사용한 변압기
부속서 G.7: 주전원코드
부속서 G.8: IEC 61051에 따른 배리스터 시험
부속서 G.9: 집적회로(IC) 전류 제한기
부속서 G.11: IEC 60384-14에 따른 캐패시터 시험
부속서 G.12: IEC 60747에 따른 광커플러 시험
부속서 G.13.6.2: 내마모성 시험
부속서 G.15: 가압 액체로 채워진 부품
부속서 J: 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7: 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8: 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R: 제한 단락 회로 시험
부속서 S.3: 방화용 엔클로우저의 바닥에 대한 난연성 시험(부속서 S.3.2)
부속서 U: CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y.2: 자외선에 대한 내성
부속서 Y.3: 부식에 대한 내성
부속서 Y.3.3: 수포화 이산화황
부속서 Y.4.3: 인장 강도 및 연신율 시험
부속서 Y.4.4: 압축 시험
부속서 Y.4.5: 내유성
부속서 Y.5.3: 물 분무 시험
부속서 Y.5.5: 과도한 먼지로부터의 보호 |
전원: 단상
전압: Max. 600 V
전류: Max. 20 A
주파수: 50/60 Hz
습도: Max. 95 % R.H.
온도: (0 ∼ 300) ℃ |
부속시설-1 |
| ▶ 유/무선 통신기기 |
| AS/NZS 4268: 2017 Amd 1: 2021 |
Radio equipment and systems - Short range devices - Limits and methods of measurement
6.4 Transmitter spurious emissions(Radiated)
7.2 Receiver requirements(Radiated) |
9 kHz ~ 40 GHz |
소재지 |
| ETSI EN 300 220-1 V3.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 1: Technical characteristics and methods of measurement
5.9 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-2 V3.3.1(2025-03) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz with power levels ranging up to 500 mW e.r.p.;
Part 2: Harmonised
Standard for access to radio spectrum for non specific radio equipment
4.3.1 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-3-1 V2.1.1(2016-12) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz)
4.3.2 Spurious Emissions(Radiated) |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-3-2 V1.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz,
869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz
4.2.2 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-4 V1.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive2014/53/EU;
Metering devices operating in designated band 169,400 MHz to 169,475 MHz
4.2.2 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 328 v2.2.2(2019-07) |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
4.3.1.10 Transmitter unwanted emissions in the
spurious domain(Radiated)
4.3.1.11 Receiver spurious emissions(Radiated)
4.3.2.9 Transmitter unwanted emissions in the
spurious domain(Radiated)
4.3.2.10 Receiver spurious emissions(Radiated) |
30 MHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 330 V2.1.1(2017-02) |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
4.3.4 Transmitter H-field requirements
4.3.5 Transmitter RF carrier current
4.3.6 Transmitter radiated E-field
4.3.8 Transmitter radiated spurious domain emission limits < 30 MHz(Radiated)
4.3.9 Transmitter radiated spurious domain emission limits > 30 MHz(Radiated)
4.4.2 Receiver spurious emissions(Radiated) |
9 kHz ~ 1 GHz |
소재지 |
| ETSI EN 300 440 V2.2.1(2018-07) |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
4.2.4 Unwanted emissions in the spurious domain(Radiated)
4.3.5 Spurious radiations(Radiated) |
9 kHz ~ 40 GHz |
소재지 |
| ETSI EN 301 893 V1.8.1(2015-03) |
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
4.5.1 Transmitter unwanted emissions outside the 5 GHz RLAN bands(Radiated)
4.6 Receiver spurious emissions(Radiated) |
30 MHz ~ 26 GHz |
소재지 |
| ETSI EN 301 893 V2.2.1(2024-11) |
5 GHz RLAN; Harmonised Standard
For access to radio spectrum
4.2.4.1 Transmitter unwanted emissions outside the 5 GHz RLAN bands(Radiated)
4.2.5 Receiver spurious emissions(Radiated) |
30 MHz ~ 26 GHz |
소재지 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields
(10 MHz to 300 GHz) |
MPE: 10 MHz ~ 40 GHz |
부속시설-1 |
| EN 62311: 2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0Hz–300GHz) |
MPE: 0 Hz ~ 40 GHz |
부속시설-1 |
| AS/NZS 4268: 2017 Amd 1: 2021 |
Radio equipment and systems - Short range devices - Limits and methods of measurement
(Exception)
6.4 Transmitter spurious emissions(Radiated)
7.2 Receiver requirements(Radiated) |
9 kHz ~ 40 GHz |
부속시설-1 |
RSS-GEN Issue5 (2021-02)
Amendment 2 |
General Requirements for Compliance of Radio Apparatus
6.13 Transmitter unwanted emissions(Radiated)
7.3 Receiver radiated emissions limits(Radiated) |
9 kHz ~ 40 GHz |
소재지 |
| RSS-247 Issue4 (2025-07) |
Digital Transmission Systems, Frequency Hopping Systems and Licence-Exempt Local Area Network Devices in 902-928 MHz, 2400-2483.5 MHz, 5150-5350 MHz, and 5470-5895 MHz bands
6.6 Unwanted emissions
7.3.1.3 Unwanted emission limits
7.3.2.3 Unwanted emission limits
7.3.3.3 Unwanted emission limits
7.3.4.4 Unwanted emission limits
7.3.5.4 Unwanted emission limits |
9 kHz ~ 40 GHz |
소재지 |
| RSS-210 Issue11 (2024-06) |
Licence-Exempt Radio Apparatus: Category I Equipment
Radiated emission |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part15 Subpart E: 2026 |
Unlicensed national information infrastructure devices
15.407(b) Undesirable emission (Radiated) |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part15 Subpart C: 2026 |
Intentional Radiators
Radiated emission |
9 kHz ~ 40 GHz |
소재지 |
| ETSI EN 300 220-1 V3.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 1: Technical characteristics and methods of measurement
(Exception)
5.9 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
부속시설-1 |
| ETSI EN 300 220-2 V3.3.1(2025-03) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz with power levels ranging up to 500 mW e.r.p.;
Part 2: Harmonised
Standard for access to radio spectrum for non specific radio equipment
(Exception)
4.3.1 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
부속시설-1 |
| ETSI EN 300 220-3-1 V2.1.1(2016-12) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz)
(Exception)
4.3.2 Spurious Emissions(Radiated) |
9 kHz ~ 6 GHz |
부속시설-1 |
| ETSI EN 300 220-3-2 V1.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz,
869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz
(Exception)
4.2.2 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
부속시설-1 |
| ETSI EN 300 220-4 V1.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive2014/53/EU;
Metering devices operating in designated band 169,400 MHz to 169,475 MHz
(Exception)
4.2.2 Unwanted emissions in the spurious domain(Radiated) |
9 kHz ~ 6 GHz |
부속시설-1 |
| ETSI EN 300 328 v2.2.2(2019-07) |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum
(Exception)
4.3.1.10 Transmitter unwanted emissions in the spurious domain(Radiated)
4.3.1.11 Receiver spurious emissions(Radiated)
4.3.2.9 Transmitter unwanted emissions in the spurious domain(Radiated)
4.3.2.10 Receiver spurious emissions(Radiated) |
30 MHz ~ 12.75 GHz |
부속시설-1 |
| ETSI EN 300 330 V2.1.1(2017-02) |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
(Exception)
4.3.4 Transmitter H-field requirements
4.3.5 Transmitter RF carrier current
4.3.6 Transmitter radiated E-field
4.3.8 Transmitter radiated spurious domain emission limits < 30 MHz(Radiated)
4.3.9 Transmitter radiated spurious domain emission limits > 30 MHz(Radiated)
4.4.2 Receiver spurious emissions(Radiated) |
9 kHz ~ 1 GHz |
부속시설-1 |
| ETSI EN 300 440 V2.2.1(2018-07) |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
(Exception)
4.2.4 Unwanted emissions in the spurious domain(Radiated)
4.3.5 Spurious radiations(Radiated) |
9 kHz ~ 40 GHz |
부속시설-1 |
| ETSI EN 301 893 V1.8.1(2015-03) |
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
(Exception)
4.5.1 Transmitter unwanted emissions outside the 5 GHz RLAN bands(Radiated)
4.6 Receiver spurious emissions(Radiated) |
30 MHz ~ 26 GHz |
부속시설-1 |
| ETSI EN 301 893 V2.2.1(2024-11) |
5 GHz RLAN; Harmonised Standard
For access to radio spectrum
(Exception)
4.2.4.1 Transmitter unwanted emissions outside the 5 GHz RLAN bands(Radiated)
4.2.5 Receiver spurious emissions(Radiated) |
30 MHz ~ 26 GHz |
부속시설-1 |
| FCC Part 2.1091: 2026 |
Radio frequency radiation exposure evaluation: mobile devices. |
MPE: 9 kHz ~ 40 GHz |
부속시설-1 |
| FCC Part 2.1093: 2026 |
Radio frequency radiation exposure evaluation: portable devices. |
MPE: 400 MHz ~ 6 GHz |
부속시설-1 |
| FCC Part15 Subpart C: 2026 |
Intentional Radiators
(Exception)
Radiated emission |
9 kHz ~ 40 GHz |
부속시설-1 |
| FCC Part15 Subpart E: 2026 |
Unlicensed national information infrastructure devices
(Exception)
15.407(b) Undesirable emission (Radiated) |
9 kHz ~ 40 GHz |
부속시설-1 |
| IEEE 100BASE-T1 Physical Media Attachment Test Suite Version 1.0:June 6, 2017 |
IEEE 100BASE-T1 Physical Media Attachment Test Suite Version 1.0 : June 6, 2017 |
0 Hz ~ 200 MHz
0 V ~ 2.2 V |
부속시설-1 |
| OPEN Alliance Automotive Ethernet ECU Test Specification Layer 1 TC8 ECU Test 3.0:May 8, 2020 |
OPEN Alliance Automotive Ethernet ECU Test Specification Layer 1 TC8 ECU Test 3.0: May 8, 2020
5.2 PMA |
0 Hz ~ 200 MHz
0 V ~ 2.2 V |
부속시설-1 |
RSS-102 Issue5 (2021-02)
Amendment 1 |
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) |
MPE: 9 kHz ~ 40 GHz |
부속시설-1 |
| RSS-210 Issue11 (2024-06) |
Licence-Exempt Radio Apparatus: Category I Equipment
(Exception)
Radiated emission
Annex B.10 Bands and 24-24.25 GHz
Annex B.11 Bands 17.15 GHz and 94 GHz
Annex F Devices operating in the bands 10.5-10.55 GHz, 24.075-24.175 GHz and 33.4-36 GHz
Annex I Fixed point-to-point systems in the band 24.05-24.25 GHz
Annex J Devices operating in the band 57-71 GHz |
9 kHz ~ 40 GHz |
부속시설-1 |
| RSS-247 Issue4 (2025-07) |
Digital Transmission Systems, Frequency Hopping Systems and Licence-Exempt Local Area Network Devices in 902-928 MHz, 2400-2483.5 MHz, 5150-5350 MHz, and 5470-5895 MHz bands
(Exception)
6.6 Unwanted emissions
7.3.1.3 Unwanted emission limits
7.3.2.3 Unwanted emission limits
7.3.3.3 Unwanted emission limits
7.3.4.4 Unwanted emission limits
7.3.5.4 Unwanted emission limits |
9 kHz ~ 40 GHz |
부속시설-1 |
RSS-GEN Issue5 (2021-02)
Amendment 2 |
General Requirements for Compliance of Radio Apparatus
(Exception)
6.13 Transmitter unwanted emissions(Radiated)
7.3 Receiver radiated emissions limits(Radiated) |
9 kHz ~ 40 GHz |
부속시설-1 |
| OPEN Alliance Automotive Ethernet ECU Test Specification TC8 ECU Test 2.0:August 23, 2017 |
OPEN Alliance Automotive Ethernet ECU Test Specification TC8 ECU Test 2.0: August 23, 2017
3. Test Scope Layer 2 of Automotive Ethernet |
100BASE-T1 |
부속시설-1 |
| OPEN Alliance TC11 Switch Semiconductor Test Specification Version 1.0 |
OPEN Alliance TC11 Switch Semiconductor Test Specification Version 1.0 |
100BASE-T1 |
부속시설-1 |
| ▶ 전자기적합성 |
| EN 61000-4-29:2000 |
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
DC 425 V |
부속시설-2 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-1 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CE: 9 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| IEC 60571:2012 |
Railway applications - Electronic equipment used on rolling stock |
Over Voltage(AC/DC):
425 V
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 20 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 100 % |
부속시설-2 |
| IEC 61000-4-29:2000 |
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
DC 425 V |
부속시설-2 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
- 3-phase 380V devices |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| VCCI CISPR 32 2016 |
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| AS CISPR 14-1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 150 kHz ∼ 30 MHz |
부속시설-1 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz |
부속시설-2 |
| AS CISPR 15:2017 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 9 kHz ∼ 30 MHz
CE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| AS CISPR 14-1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 30 MHz ∼ 1 GHz
DP: 30 MHz ~ 300 MHz
CE: 150 kHz ∼ 30 MHz |
부속시설-2 |
| AS/NZS 61000.6.3:2021 |
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for equipment in residential environments |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| AS CISPR 15:2017 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ~300 MHz
CE: 9 kHz ∼ 30 MHz |
부속시설-2 |
| AS/NZS 61000.3.2:2013 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
0 A ~ 16 A
0 ~ 40 th Harmonic |
부속시설-2 |
| KS X 3139:2014 |
이동 위성 업무 기기의 전자파 적합성 시험 방법 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| KS X 3126:2024 |
무선 데이터 통신 시스템용 특정 소출력 무선기기 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| AS/NZS 61000.3.3:2012 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
max. 16 A |
부속시설-2 |
| AS/NZS 61000.6.4:2012 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| AS/NZS 61000.6.3:2021 |
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for equipment in residential environments |
Hamonis/Flicker:
0 kHz ~ 2 kHz
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| AS/NZS 61000.6.4:2012 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- RE 30 m excluding test |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| AS/NZS CISPR 11:2011 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
- RE 30 m excluding test |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz |
부속시설-2 |
| KS X 3125:2024 |
특정 소출력 무선기기 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| AS/NZS CISPR 14.1:2013 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 30 MHz ~ 1 GHz
DP: 30 MHz ~ 300 MHz
CE: 150 kHz ∼ 30 MHz |
부속시설-2 |
| AS/NZS CISPR 11:2011 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| KS X 3124:2024 |
무선기기의 공통 전자파적합성 시험방법 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| AS/NZS CISPR 14.1:2013 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 150 kHz ∼ 30 MHz |
부속시설-1 |
| AS/NZS CISPR 15:2011 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 kHz ∼ 30 MHz
RE: 30 MHz ∼ 300 MHz |
부속시설-2 |
| AS/NZS CISPR 32:2015 AMD 1:2020 |
Electromagnetic compatibility of multimedia equipment. Emission Requirements |
CE: 150 kHz ∼ 30 MHz
차동모드: 30 ∼ 2 150 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| AS/NZS CISPR 15:2011 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| KS C IEC 62236-5:2018 |
철도 적용 ― 전자기 적합성 ― 제5부: 고정 전력공급 설비와 기기의 방출 및 내성 |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| AS/NZS CISPR 32:2015 AMD 1:2020 |
Electromagnetic compatibility of multimedia equipment. Emission Requirements |
CE: 150 kHz ∼ 30 MHz
차동모드: 30 MHz ∼ 2 150 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz |
부속시설-2 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| KS C IEC 62236-4:2018 |
철도 적용 ― 전자기 적합성 ― 제4부: 신호 및 통신 기기의 방출 및 내성 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 9 kHz ~ 30 MHz
1 GHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
부속시설-1 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 9 kHz ~ 6 GHz
DP: 30 MHz ~ 300 MHz
CE: 9 kHz ∼ 30 MHz |
부속시설-2 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 230 MHz, 3 V
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| KS C IEC 62236-3-2:2018 |
철도 적용 ― 전자기 적합성 ― 제3-2부: 철도 차량 ― 기기 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 230 MHz, 3 V
V-DIP: 0%, 40 %, 70 % |
부속시설-1 |
| KS C IEC 62236-3-1:2018 |
철도 적용 ― 전자기 적합성 ― 제3-1부: 철도 차량 ― 열차 및 완성 차량 |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| CISPR 15:2018+AMD1:2024 CSV |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ∼ 1 GHz
CE: 9 kHz ∼ 30 MHz |
부속시설-2 |
| CISPR 15:2018+AMD1:2024 CSV |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 9 kHz ∼ 30 MHz
CE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| CISPR 24:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 1 A/m
V-DIP: >95 %, 30 % |
부속시설-2 |
| CISPR 24:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 1 A/m
V-DIP: >95 %, 30 % |
부속시설-1 |
| CISPR32:2015/AMD1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ∼ 30 MHz
차동모드: 30 ∼ 2 150 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| KS C IEC 62236-2:2018 |
철도 적용 ― 전자기 적합성 ― 제2부: 전체 철도 시스템에서 외부로 나가는 방출 |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| DNVGL-CG-0339 Edition November 2021 |
Environmental test specification for electrical, electronic and programmable equipment and systems
(시험가능 범위)
- Section 3 - 14.5/14.6/14.7/14.8/14.9/14.11/14.12 |
RE: 150 kHz ∼ 6 GHz
CE: 10 kHz ∼ 30 MHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 1 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-2 |
| CISPR32:2015/AMD1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ∼ 30 MHz
차동모드: 30 MHz ∼ 2 150 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| DNVGL-CG-0339 Edition November 2021 |
Environmental test specification for electrical, electronic and programmable equipment and systems
(시험가능 범위)
- Section 3 - 14.5/14.6/14.7/14.8/14.9/14.11/14.12 |
CE: 10 kHz ∼ 30 MHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz, 10V/m
EFT: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ∼ 80 MHz, 10V/m |
부속시설-1 |
| EN 300 386 V3.2.1 (2025-11) |
Telecommunication network equipment;
Harmonised Standard for
ElectroMagnetic Compatibility (EMC) requirements |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 10 kV
RS: 80 MHz ∼ 6 GHz, 10 V/m
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 230 MHz, 10 V
MF: 30 A/M
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS C IEC 60601-1-2:2014 |
의료용 전기기기 – 제1-2부 : 기본 안전 및 필수 성능에 관한 일반 요구사항 – 보조표준: 전자파 장해 – 요구사항 및 시험 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
EN
301 489-1 V2.2.3
(2019-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
9.6 Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
EN
301 489-1 V2.2.3
(2019-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
9.6 Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| EN 301 489-17 V3.3.1 (2024-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 방해 시험방법 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN 300 386 V3.2.1 (2025-11) |
Telecommunication network equipment;
Harmonised Standard for
ElectroMagnetic Compatibility (EMC) requirements |
CE: 9 kHz ∼ 30 MHz
RE: 9 MHz ∼ 18 GHz
ESD: ± 10 kV
RS: 80 MHz ∼ 6 GHz, 10 V/m
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 230 MHz, 10 V
MF: 30 A/M
V-DIP: 0 %, 70 % |
부속시설-2 |
| EN 50121-2:2017 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
CE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| EN 301 489-17 V3.3.1 (2024-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| EN 50121-2:2017 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
RE: 9 kHz ∼ 1 GHz |
부속시설-2 |
| EN 50121-3-2:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-1 |
| EN 50121-4:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-1 |
| EN 50121-3-1:2017/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
RE: 9 kHz ∼ 1 GHz |
부속시설-2 |
| KS C 9815:2023 |
조명 기기 및 유사 기기의 무선 방해 특성 측정 허용기준과 측정 방법 |
RE: 30 MHz ∼ 1 GHz |
소재지 |
| EN 50121-5:2017/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 9 kHz ∼ 30 MHz
ESD: ± 8 kV
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-1 |
| EN 50121-3-2:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 20 V/m
1 GHz ~ 6 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-2 |
| EN IEC 55011:2025 |
Industrial,scientific and medical equipment- Radio-frequency distubance characteristics- Limits and methods of measurement
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| EN 50121-4:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 10 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-2 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동 공구 및 유사기기의 요구사항 - 제1부: 방출 |
RE: 9 kHz ∼ 6 GHz |
소재지 |
| EN 50121-5:2017/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 1 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 20 V/m
1 GHz ~ 6 GHz, 10 V/m
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m
PMF: 1000 A/m |
부속시설-2 |
| EN 55032:2015/A11:2020 |
Electromagnetic compatibility of multimedia equipment. Emission Requirements |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 18 GHz
차동모드: 30 MHz ∼ 2 150 MHz |
부속시설-1 |
| EN 50155:2021 |
Railway applications - Rolling stock - Electronic equipment |
Over Voltage(AC/DC):
425 V
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 20 V/m
1 GHz ~ 6 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 100 % |
부속시설-2 |
| EN 55035:2017/A11:2020 |
Electromagnetic Compatibility of multimedia equipment - Immunity Requirements |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz,
3 V
MF: 1 A/m
V-DIP: < 5 %, 70 % |
부속시설-1 |
| KS C 9811:2019 |
산업ㆍ과학ㆍ의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
(시험제외항목)
- 3상 380 V 기기 시험제외
- RE 30 m 시험제외m 시험제외) |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) - 제6-4부 : 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준
(시험제외항목 )
- 3상 380 V 기기 시험제외 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN IEC 55011:2025 |
Industrial,scientific and medical equipment- Radio-frequency distubance characteristics- Limits and methods of measurement
(Exception)
- RE 30 m excluding test |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz |
부속시설-2 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) - 제6-3부 : 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN 55032:2015/A11:2020 |
Electromagnetic compatibility of multimedia equipment. Emission Requirements |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz
차동모드: 30 MHz ∼ 2 150 MHz |
부속시설-2 |
| EN 55035:2017/A11:2020 |
Electromagnetic Compatibility of multimedia equipment - Immunity Requirements |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 1 A/m
V-DIP: < 5 %, 70 % |
부속시설-2 |
| EN 60601-1-2:2015 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 15 kV
RS: 80 MHz ∼ 2.7 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, Max. 6 V
MF: 30 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
| EN 60601-1-2:2015 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz
ESD: ± 15 kV
RS: 80 MHz ∼ 2.7 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, Max. 6V
MF: 30 A/m
V-DIP: 0 %, 70 %
Harmonic/Flicker:
Max. 16A
0~40 th Harmonic |
부속시설-2 |
| KR:2019 |
제조법 및 형식승인 등에 관한 지침
제3장 형식승인
제23절 자동화시스템
표3.23.1 환경시험항목, 시험조건,
시험방법 및 판정기준
(시험가능범위)
표3.23.1 (번호 14/15/17/18/19/20/21) |
RE: 150 ㎑ ~ 2 ㎓ |
소재지 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
(시험가능 범위)
- Cl. 9 EMI - Cl. 10 EMS |
CE: 10 kHz ∼ 30 MHz
ESD: ± 10 kV
RS: 80 MHz ∼ 2 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 1 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 120 % |
부속시설-1 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
(시험가능 범위)
- Cl. 9 EMI - Cl. 10 EMS |
CE: 10 kHz ∼ 30 MHz
RE: 150 kHz ∼ 2 GHz
ESD: ± 10 kV
RS: 80 MHz ∼ 2 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 1 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 120 % |
부속시설-2 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus. |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| EN 61000-3-3:2013/A1:2019 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
max. 16 A |
부속시설-2 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
Discharge voltage max. ± 30 kV |
부속시설-1 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
max. ±4 kV |
부속시설-1 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus. |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN 61000-3-3:2013/A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
max. 16 A |
부속시설-2 |
| EN 61000-4-5:2014/A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
max. ± 4 kV |
부속시설-1 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-1 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
Discharge voltage max. ± 30 kV |
부속시설-2 |
| IEC 62236-3-1:2018 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle. |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| EN 61000-4-34:2007/A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
0 % ∼ 100 % |
부속시설-2 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
max. ±4 kV |
부속시설-2 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
max. 300 A/m |
부속시설-1 |
| IEC 62236-2:2018 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world. |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| EN 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
max. 1000 A/m |
부속시설-1 |
EN 61000-4-5:
2014/A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
max. ± 4 kV |
부속시설-2 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 2.0 GHz, 3 V/m
2.0 GHz ~ 2.7 GHz, 1 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-2 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
max. 300 A/m |
부속시설-2 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1 GHz ~ 2 GHz, 3 V/m
2.0 GHz ~2.7 GHz, 1 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-1 |
EN 61000-4-9:
2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
max. 1000 A/m |
부속시설-2 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 9 kHz ~ 30 MHz
1 GHz ~ 6 GHz
CE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 2.0 GHz, 3 V/m
2.0 GHz ~ 2.7 GHz, 1 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-2 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- 3-phase 380V devices |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 230 MHz, 3 V
V-DIP: 0 %, 40 %, 70 % |
부속시설-1 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
Hamonis/Flicker:
0 kHz ~ 2 kHz
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| EN IEC 55015:2019/A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 9 kHz ∼ 30 MHz
CE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1 GHz ~ 2 GHz, 3 V/m
2.0 GHz ~2.7 GHz, 1 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 9 kHz ~ 6 GHz
DP: 30 MHz ~ 300 MHz
CE: 9 kHz ∼ 30 MHz |
부속시설-2 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
0 % ∼ 100 % |
부속시설-1 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 230 MHz, 3 V
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| EN IEC 55015:2019/A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ∼ 1 GHz
CE: 9 kHz ∼ 30 MHz |
부속시설-2 |
| EN IEC 61000-3-2:2019/A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
max. 16 A
0 ~ 40 th Harmonic |
부속시설-2 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz ∼ 6 GHz, max. 10 V/m |
부속시설-1 |
| EN IEC 61000-3-2:2019/A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
max. 16 A
0 ~ 40 th Harmonic |
부속시설-2 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
0 % ∼ 100 % |
부속시설-2 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-1 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 6.0 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
| IEC 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
(시험가능 범위)
- Cl. 9 EMI - Cl. 10 EMS |
RE: 150 kHz ∼ 2 GHz |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
ESD: ±8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-1 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz ∼ 6 GHz, max. 20 V/m |
부속시설-2 |
| IEC 60601-1-2:2014+AMD1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-2 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 6.0 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-2 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
Hamonis/Flicker:
0 kHz ~ 2 kHz
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| IC ICES-003 Issue 7 |
Information Technology Equipment (Including Digital Apparatus) — Limits and Methods of Measurement |
RE: 30 MHz ∼ 18 GHz |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- RE 30 m excluding test |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| EN IEC 61547:2023 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 %
(Road and street lighting equipment ESD: air discharge ± 15 kV, contact discharge ± 8 kV SURGE: line to line ± 2 kV, line to ground ± 4 kV) |
부속시설-1 |
| ETSI EN 301 489-19 V2.2.1 (2022-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers
operating in the RNSS band
providing positioning, navigation, and timing data;
Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % , 70 % |
부속시설-1 |
| EN IEC 61547:2023 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 %
(Road and street lighting equipment ESD: air discharge ± 15 kV, contact discharge ± 8 kV SURGE: line to line ± 2 kV, line to ground ± 4 kV) |
부속시설-2 |
| ETSI EN 301 489-20 V2.2.1 (2021-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| ETSI EN 301 489-19 V2.2.1 (2022-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers
operating in the RNSS band
providing positioning, navigation, and timing data;
Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % , 70 % |
부속시설-2 |
| ETSI EN 301 489-3 V2.3.2 (2023-01) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard for Electromagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| FCC CFR 47 Part15 Subpart B-2024 |
RADIO FREQUENCY DEVICES - UNINTENTIONAL RADIATORS |
RE: 30 MHz ∼ 40 GHz |
소재지 |
| ETSI EN 301 489-20 V2.2.1 (2021-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| ETSI EN 301 489-52 V1.3.1 (2024-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
- Annex B
Sound Pressure Test |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| ETSI EN 301 489-3 V2.3.2 (2023-01) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard for Electromagnetic Compatibility
(Exception)
Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| ETSI EN 301 489-3 V2.3.2 (2023-01) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for Electromagnetic Compatibility |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| ETSI EN 301 489-52 V1.3.1 (2024-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
- Annex B
Sound Pressure Test
- Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| ETSI EN 301 489-52 V1.3.1 (2024-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
- Annex B
Sound Pressure Test
- Transients and surges in the vehicular environment |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| FCC CFR 47 Part15 Subpart B-2024 |
RADIO FREQUENCY DEVICES - UNINTENTIONAL RADIATORS |
CE: 150 kHz ∼ 30 MHz |
부속시설-1 |
| IC ICES-003 Issue 7 |
Information Technology Equipment (Including Digital Apparatus) — Limits and Methods of Measurement |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| FCC CFR 47 Part15 Subpart B-2024 |
RADIO FREQUENCY DEVICES - UNINTENTIONAL RADIATORS |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 40 GHz |
부속시설-2 |
| ETSI EN 301 489-20 V2.2.1 (2021-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard for ElectroMagnetic Compatibility |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| IEC 60601-1-2:2014+AMD1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 15 kV
RS: 80 MHz ∼ 2.7 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, max. 6 V
MF: 30 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
| IEC 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
(시험가능 범위)
- Cl. 9 EMI - Cl. 10 EMS |
CE: 10 kHz ∼ 30 MHz
ESD: ± 10 kV
RS: 80 MHz ∼ 2 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 1 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 120 % |
부속시설-1 |
| IC ICES-003 Issue 7 |
Information Technology Equipment (Including Digital Apparatus) — Limits and Methods of Measurement |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 18 GHz |
부속시설-2 |
| IEC 60601-1-2:2014+AMD1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz
ESD: ± 15 kV
RS: 80 MHz ∼ 2.7 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, max. 6 V
MF: 30 A/m
V-DIP: 0 %, 70 %
Harmonic/Flicker
max. 16 A
0-40 th Harmonic |
부속시설-2 |
| IEC 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
(시험가능 범위)
- Cl. 9 EMI - Cl. 10 EMS |
CE: 10 kHz ∼ 30 MHz
RE: 150 kHz ∼ 2 GHz
ESD: ± 10 kV
RS: 80 MHz ∼ 2 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 1 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 120 % |
부속시설-2 |
| IEC 61000-4-11:2004+AMD1:2017 CSV |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
V-DIP: 0 ∼ 100 % |
부속시설-1 |
| ETSI EN 301 489-19 V2.2.1 (2022-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile
Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers
operating in the RNSS band
providing positioning, navigation, and timing data;
Harmonised Standard for ElectroMagnetic Compatibility |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
V-DIP: 0 % ∼ 100 % |
부속시설-1 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| IEC 61000-3-2:2018+AMD1:2020+AMD2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
max. 16 A
0 ~ 40 th Harmonic |
부속시설-2 |
| IEC 61000-3-2:2020 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
max. 16 A
0 ~ 40 th Harmonic |
부속시설-2 |
IEC 61000-4-2:
2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
Discharge voltage max. ± 30 kV |
부속시설-1 |
| IEC 61000-3-3:2013+AMD1:2017 CSV |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
max. 16 A |
부속시설-2 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz ∼ 6 GHz, max. 10 V/m |
부속시설-1 |
| IEC 61000-3-3:2013+AMD1:2017+AMD2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
max. 16 A |
부속시설-2 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
max. ±4 kV |
부속시설-1 |
| IEC 61000-4-11:2004+AMD1:2017 CSV |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
V-DIP: 0 % ∼ 100 % |
부속시설-2 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
V-DIP: 0 ∼ 100 % |
부속시설-2 |
| IEC 61000-4-5:2014 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
max. ±4 kV |
부속시설-1 |
| IEC 61000-4-5:2014/AMD1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
max. ±4 kV |
부속시설-1 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
Discharge voltage max. ± 30 kV |
부속시설-2 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz ∼ 6 GHz, max. 20 V/m |
부속시설-2 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz ∼ 230 MHz, max. 10 V |
부속시설-1 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| IEC 61000-4-34:2005/AMD1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
0 % ∼ 100 % |
부속시설-2 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
max. 300 A/m |
부속시설-1 |
| EN IEC 55015:2019/A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ∼ 1 GHz |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
max. ±4 kV |
부속시설-2 |
| IEC 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
max. 1000 A/m |
부속시설-1 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 9 kHz ~ 6 GHz |
소재지 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
IEC 61000-4-5:
2014/AMD1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
max. ± 4 kV |
부속시설-2 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 30 A/m
V-DIP: 0 %, 40%, 70 % |
부속시설-1 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| IEC 61000-4-5:2014 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
max. ±4 kV |
부속시설-2 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-2 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
max. 300 A/m |
부속시설-2 |
IEC 61000-4-9:
2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
max. 1000 A/m |
부속시설-2 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- 3-phase 380V devices |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results
(시험가능 범위)
- Cl. 9 EMI - Cl. 10 EMS |
RE: 150 kHz ∼ 2 GHz |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz,.3V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-2 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| EN 60601-1-2:2015 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1 GHz ~ 2 GHz, 3 V/m
2.0 GHz ~2.7 GHz, 1 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-1 |
| EN 55032:2015/A11:2020 |
Electromagnetic compatibility of multimedia equipment. Emission Requirements |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 %
(Road and street lighting equipment ESD: air discharge ± 15 kV, contact discharge ± 8 kV SURGE: line to line ± 2 kV, line to ground ± 4 kV) |
부속시설-1 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
Hamonis/Flicker:
0 kHz ~ 2 kHz
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 10 V/m
1 GHz ~ 2 GHz, 3 V/m
2.0 GHz ~2.7 GHz, 1 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| EN IEC 55011:2025 |
Industrial,scientific and medical equipment- Radio-frequency distubance characteristics- Limits and methods of measurement
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| EN 50121-5:2017/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| EN 50121-4:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 %
(Road and street lighting equipment ESD: air discharge ± 15 kV, contact discharge ± 8 kV SURGE: line to line ± 2 kV, line to ground ± 4 kV) |
부속시설-2 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-1 |
| EN 50121-3-2:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
RE: 30 MHz ∼ 6 GHz |
소재지 |
IEC 62236-2:
2018 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world. |
RE: 9 kHz ∼ 1 GHz |
부속시설-2 |
IEC 62236-3-1:
2018 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle. |
RE: 9 kHz ∼ 1 GHz |
부속시설-2 |
IEC 62236-3-2:
2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 20 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-2 |
| EN 50121-3-1:2017/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
RE: 9 kHz ∼ 1 GHz
(Exception)
-Annex A Interference on telecommunication lines |
소재지 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus. |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 10 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-2 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus. |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-1 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus. |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 1 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 10 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-2 |
| KR:2019 |
제조법 및 형식승인 등에 관한 지침
제3장 형식승인
제23절 자동화시스템
표3.23.1 환경시험항목, 시험조건,
시험방법 및 판정기준
(시험가능범위)
표3.23.1 (번호 14/15/17/18/19/20/21) |
CE: 10 ㎑ ~ 30 ㎒
RE: 150 ㎑ ~ 2 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2 ㎓, 10 V/m
EFT: ± 2 ㎸
Surge: ± 1 ㎸
CS: 150 ㎑ ~ 80 ㎒, 10 V |
부속시설-2 |
| KS C 9547:2023 |
일반조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 %
(가로등 및 보안등용 조명기기 ESD: 기중방전 ± 15 kV, 접촉방전 ± 8 kV
SURGE: 선로 간 ± 2 kV, 선로와 접지 간 ± 4 kV ) |
부속시설-2 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) - 제4-11부: 시험 및 측정기술 - 전압강하, 순간 정전 및 전압 변동 내성시험 |
0 % ~ 100 % |
부속시설-2 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus. |
CE: 9 kHz ∼ 30 MHz
ESD: ± 8 kV
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-1 |
| EN 50121-2:2017 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
RE: 9 kHz ∼ 1 GHz |
소재지 |
| KR:2019 |
제조법 및 형식승인 등에 관한 지침
제3장 형식승인
제23절 자동화시스템
표3.23.1 환경시험항목, 시험조건,
시험방법 및 판정기준
(시험가능범위)
표3.23.1 (번호 14/15/17/18/19/20/21) |
CE: 10 ㎑ ~ 30 ㎒
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2 ㎓, 10 V/m,
EFT: ± 2 ㎸
Surge: ± 1 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V |
부속시설-1 |
| KS C 9547:2023 |
일반조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 %
(가로등 및 보안등용 조명기기 ESD: 기중방전 ± 15 kV, 접촉방전 ± 8 kV
SURGE: 선로 간 ± 2 kV, 선로와 접지 간 ± 4 kV ) |
부속시설-1 |
| EN 301 489-17 V3.3.1 (2024-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성시험 |
Discharge voltage max. ± 30 kV |
부속시설-2 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성시험 |
80 MHz ∼ 6 GHz, max. 20 V/m |
부속시설-2 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) - 제4-11부: 시험 및 측정기술 - 전압강하, 순간 정전 및 전압변동 내성시험 |
0 % ~ 100 % |
부속시설-1 |
| KS C 9610-4-4:2020 |
전자파기적합성(EMC) - 제4-4부 : 시험 및 측정기술 - 전기적 빠른 과도현상/버스트 내성시험 |
max. ±4 kV |
부속시설-2 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정기술 - 서지 내성시험 |
max. ±4 kV |
부속시설-2 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성시험 |
Discharge voltage max. ± 30 kV |
부속시설-1 |
| EN 300 386 V3.2.1 (2025-11) |
Telecommunication network equipment;
Harmonised Standard for
ElectroMagnetic Compatibility (EMC) requirements |
RE: 30 MHz ∼ 18 GHz |
소재지 |
EN
301 489-1 V2.2.3
(2019-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성시험 |
80 MHz ∼ 6 GHz, max. 10 V/m |
부속시설-1 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) - 제4-4부 : 시험 및 측정기술 - 전기적 빠른 과도현상/버스트 내성시험 |
max. ±4 kV |
부속시설-1 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정기술 - 서지 내성시험 |
max. ±4 kV |
부속시설-1 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부 : 시험 및 측정기술 – 전도성 RF 전자기장 내성 시험 |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-2 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC)-제4-8부:시험 및 측정기술 - 전원주파수 자기장 내성시험 |
max. 300 A/m |
부속시설-2 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부 : 시험 및 측정기술 – 전도성 RF 전자기장 내성 시험 |
150 kHz ∼ 230 MHz, max. 10 V |
부속시설-1 |
| KS C 9610-4-9:2019 |
전자파적합성(EMC) - 제4-9부 : 시험 및 측정기술 – 임펄스 자기장 내성시험 |
max. 1000 A/m |
부속시설-2 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) - 제6-1부 : 일반표준 – 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ± 8 kV
RS: 80 MHz ∼ 1 000 MHz, 3 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-2 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC)-제4-8부:시험 및 측정기술 - 전원주파수 자기장 내성시험 |
max. 300 A/m |
부속시설-1 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) - 제6-2부 : 일반표준 – 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-2 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) - 제6-3부 : 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
Hamonis/Flicker:
0 kHz ~ 2 kHz
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| KS C 9610-4-9:2019 |
전자파적합성(EMC) - 제4-9부 : 시험 및 측정기술 – 임펄스 자기장 내성시험 |
max. 1000 A/m |
부속시설-1 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) - 제6-1부 : 일반표준 – 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±8 kV
RS: 80 MHz ∼1 000 MHz, 3 V/m
1.4 GHz ~ 6.0 GHz, 3V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 3 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) - 제6-2부 : 일반표준 – 산업 환경에서 사용하는 기기의 전자파 내성 표준
(시험제외항목)
- 3상 380 V 기기 시험제외 |
ESD: ±8 kV
RS: 80 MHz ∼ 1 000 MHz, 10 V/m
1.4 GHz ~ 6 GHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 30 A/m
V-DIP: 0 %, 40 %, 70 % |
부속시설-1 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) - 제6-4부 : 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz |
부속시설-2 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) - 제6-3부 : 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| KS C 9811:2019 |
산업ㆍ과학ㆍ의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
(시험제외항목)
- RE 30 m 시험제외 |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 18 GHz |
부속시설-2 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부: 방출 |
CE: 9 kHz ∼ 30 MHz
DP: 30 MHz ~ 300 MHz
RE: 9 kHz ∼ 6 GHz |
부속시설-2 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) - 제6-4부 : 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준
(시험제외항목 )
- 3상 380 V 기기 시험제외 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| KS C 9811:2019 |
산업ㆍ과학ㆍ의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
(시험제외항목)
- 3상 380 V 기기 시험제외
- RE 30 m 시험제외 |
CE: 9 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기 기기, 전동 공구 및 유사기기의 요구사항 － 제2부: 내성 |
ESD: ± 30 kV
RS: 80 MHz ∼ 6 GHz, 10 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 230 MHz, 3 V
V-DIP: 0 %, 40 %, 70 %
MF: 10 A/m |
부속시설-2 |
| KS C 9815:2023 |
조명 기기 및 유사 기기의 무선 방해 특성의 측정 허용기준과 측정 방법 |
CE: 9 kHz ∼ 30 MHz
RE: 30 MHz ∼ 1 GHz |
부속시설-2 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구 사항 - 제1부: 방출 |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ~ 30 MHz
1 GHz ~ 6 GHz |
부속시설-1 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 방해 시험방법 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
차동모드: 30 MHz ∼ 2 150 MHz |
부속시설-2 |
| DNVGL-CG-0339 Edition November 2021 |
Environmental test specification for electrical, electronic and programmable equipment and systems
(시험가능 범위)
- Section 3 - 14.5/14.6/14.7/14.8/14.9/14.11/14.12 |
RE: 150 kHz ∼ 6 GHz |
소재지 |
| CISPR 32:2015/AMD1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 1 A/m
V-DIP: < 5 %, 70 % |
부속시설-2 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기 기기, 전동 공구 및 유사기기의 요구사항 － 제2부: 내성 |
ESD: ± 30 kV
RS: 80 MHz ∼ 6 GHz, 10 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 230 MHz, 3 V
V-DIP: 0 %, 40 %, 70 %
MF: 10 A/m |
부속시설-1 |
KS C IEC
62236-4:2018 |
철도 적용 ― 전자기 적합성 ― 제4부: 신호 및 통신 기기의 방출 및 내성 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 10 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-2 |
| KS C 9815:2023 |
조명 기기 및 유사 기기의 무선 방해 특성의 측정허용기준과 측정 방법 |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 30 MHz |
부속시설-1 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기 |
Over Voltage(AC/DC):
425 V
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 20 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 % ∼ 100 % |
부속시설-2 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 방해 시험방법 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
차동모드: 30 MHz ∼ 2 150 MHz |
부속시설-1 |
| CISPR 15:2018+AMD1:2024 CSV |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ∼ 1 GHz |
소재지 |
| KS C IEC 60601-1-2:2014 |
의료용 전기기기 – 제1-2부 : 기본 안전 및 필수 성능에 관한 일반 요구사항 – 보조표준: 전자파 장해 – 요구사항 및 시험 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 15 kV
RS: 80 MHz ∼ 2.7 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 6 V
MF: 30 A/m
V-DIP: 0 %, 70 % |
부속시설-2 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 3 V
MF: 1 A/m
V-DIP: < 5 %, 70 % |
부속시설-1 |
| KS C IEC 61000-4-29:2014 |
전자기적합성(EMC)-제4-29부: 시험 및 측정 기술-직류 전원단자에서의 전압 강하, 순시 정전 및 전압 변동 내성 시험 |
DC 425 V |
부속시설-2 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 9 kHz ~ 6 GHz |
소재지 |
| KS C IEC 60601-1-2:2014 |
의료용 전기기기 – 제1-2부 : 기본 안전 및 필수 성능에 관한 일반 요구사항 – 보조표준: 전자파 장해 – 요구사항 및 시험 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 15 kV
RS: 80 MHz ∼ 2.7 GHz, 10 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 6 V
MF: 30 A/m
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS C IEC 61000-4-34:2009 |
전자파적합성(EMC)-제4-34부: 시험 및 측정 기술-상당 입력전류 16 A를 초과하는 기기에 대한 전압 강하, 순간 정전 및 전압 변동 내성 시험 |
0 % ∼ 100 % |
부속시설-2 |
| KS C IEC 62236-2:2018 |
철도 적용 ― 전자기 적합성 ― 제2부: 전체 철도 시스템에서 외부로 나가는 방출 |
RE: 9 kHz ∼ 1 GHz |
부속시설-2 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| KS C IEC 62236-3-1:2018 |
철도 적용 ― 전자기 적합성 ― 제3-1부: 철도 차량 ― 열차 및 완성 차량 |
RE: 9 kHz ∼ 1 GHz |
부속시설-2 |
| AS/NZS CISPR 32:2015 AMD 1:2020 |
Electromagnetic compatibility of multimedia equipment. Emission Requirements |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| KS C IEC 62236-3-2:2018 |
철도 적용 ― 전자기 적합성 ― 제3-2부: 철도 차량 ― 기기 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 20 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-2 |
| KS C IEC 62236-3-2:2018 |
철도 적용 ― 전자기 적합성 ― 제3-2부: 철도 차량 ― 기기 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V |
부속시설-1 |
| KS C IEC 62236-4:2018 |
철도 적용 ― 전자기 적합성 ― 제4부: 신호 및 통신 기기의 방출 및 내성 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
EFT: ± 2 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-1 |
| KS C IEC 62236-5:2018 |
철도 적용 ― 전자기 적합성 ― 제5부: 고정 전력공급 설비와 기기의 방출 및 내성 |
CE: 9 kHz ∼ 30 MHz
ESD: ± 8 kV
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-1 |
| AS/NZS CISPR 15:2011 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ∼ 300 MHz |
소재지 |
| KS X 3124:2024 |
무선기기의 공통 전자파적합성 시험방법
(Exception)
9.6 차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS C IEC 62236-5:2018 |
철도 적용 ― 전자기 적합성 ― 제5부: 고정 전력공급 설비와 기기의 방출 및 내성 |
CE: 9 kHz ∼ 30 MHz
RE: 9 kHz ∼ 1 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 800 MHz, 10 V/m
800 MHz ~ 1 000 MHz, 20 V/m
1 400 MHz ~ 2 000 MHz, 10 V/m
2 000 MHz ~ 2 700 MHz, 5 V/m
5 100 MHz ~ 6 000 MHz, 3 V/m
EFT: ± 4 kV
SURGE: ± 4 kV
CS: 150 kHz ∼ 80 MHz, 10 V
MF: 300 A/m |
부속시설-2 |
| AS/NZS CISPR 14.1:2013 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 30 MHz ∼ 1 GHz |
소재지 |
| KS X 3124:2024 |
무선기기의 공통 전자파적합성 시험방법
(Exception)
9.6 차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| AS/NZS CISPR 11:2011 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| AS/NZS 61000.6.4:2012 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
- 3-phase 380 V devices
- RE 30 m excluding test
- Exceeding the current 30 A |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| AS/NZS 61000.6.3:2021 |
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for equipment in residential environments |
RE: 30 MHz ∼ 6 GHz |
소재지 |
| KS X 3125:2024 |
특정 소출력 무선기기 전자파적합성 시험방법
(Exception)
차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS X 3125:2024 |
특정 소출력 무선기기 전자파적합성 시험방법
(Exception)
차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| KS X 3126:2024 |
무선 데이터 통신 시스템용 특정 소출력 무선기기 전자파적합성 시험방법
(Exception)
차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| AS CISPR 15:2017 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE: 30 MHz ∼ 300 MHz |
소재지 |
| KS X 3126:2024 |
무선 데이터 통신 시스템용 특정 소출력 무선기기 전자파적합성 시험방법
(Exception)
차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| AS CISPR 14-1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE: 30 MHz ∼ 1 GHz |
소재지 |
| KS X 3139:2014 |
이동 위성 업무 기기의 전자파 적합성 시험 방법
(Exception)
차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-1 |
| KS X 3139:2014 |
이동 위성 업무 기기의 전자파 적합성 시험 방법
(Exception)
차량 환경에서의 빠른 과도 현상 및 서지 |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
ESD: ± 8 kV
RS: 80 MHz ∼ 6 GHz, 3 V/m
EFT: ± 1 kV
SURGE: ± 2 kV
CS: 150 kHz ∼ 80 MHz, 10 V
V-DIP: 0 %, 70 % |
부속시설-2 |
| VCCI V-3/2015.04 |
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements |
CE: 150 kHz ∼ 30 MHz
RE: 1 GHz ∼ 6 GHz |
부속시설-1 |
| VCCI CISPR 32 2016 |
Agreement of Voluntary Control Council for Interference by Information Technology Equipment - Technical Requirements |
CE: 150 kHz ∼ 30 MHz
RE: 30 MHz ∼ 6 GHz
differential mode: 30 MHz ∼ 2 150 MHz |
부속시설-2 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
- 3-phase 380V devices |
RE: 9 kHz ∼ 18 GHz |
소재지 |
| ▶ 환경 및 신뢰성 |
KS C IEC
60068-2-14:2023 |
환경 시험 – 제2-14부: 시험 – 시험 N: 온도 변화
8. 시험 Nb: 규정된 변화율에 따른 온도 변화 |
(-40 ~ 100) ℃ |
부속시설-1 |
KS C IEC
60068-2-2:2007 |
환경시험 - 제2-2부: 시험 B: 내열성 시험 |
(30 ～ 125) ℃ |
부속시설-1 |
| KS C IEC 60068-2-30:2005 |
환경 시험 - 제 2-30부: 시험 - 시험 Db와 지침: 주기적 내습(12 h + 12 h 주기) |
(25 ~ 55) ℃ (40 ~ 95) % R.H. |
부속시설-1 |
KS C IEC
60068-2-38:2021 |
환경 시험 - 제 2-38부: 시험 - 시험 Z/AD: 합성 온도/습도 사이클 시험 |
(-10 ~ 65) ℃ (20 ~ 93) % R.H. |
부속시설-1 |
KS C IEC
60068-2-78:2012 |
환경 시험 – 제 2-78부: 시험 - 시험 Cab: 안정 상태의 내습성 시험 |
(30 ±2) ℃, (93 ±3) % R.H.
(30 ±2) ℃, (85 ±3) % R.H.
(40 ±2) ℃, (93 ±3) % R.H.
(40 ±2) ℃, (85 ±3) % R.H. |
부속시설-1 |
KS C IEC
60068-2-1:2007 |
환경시험 - 제2-1부: 시험 A: 내한성 시험 |
(-40 ～ 5) ℃ |
부속시설-1 |
| IEC 60571:2012 |
Railway applications - Electronic Equipment used on rolling stock
5.1.1.2 Variations of voltage supply
5.1.1.3 Interruptions of voltage supply
12.2.4 Cold start test
12.2.5 Dry heat test
12.2.6 Damp heat test, cyclic
12.2.10 Insulation test
12.2.15 Low temperature storage test |
(-40 ~ 125) ℃ (40 ~ 95) % R.H.
Supply voltage(0 ~ 300) V
(0.05 ~ 5.00) kV a.c.
(0.05 ~ 5.00) kV d.c.
0.5 MΩ ~ 9.0 GΩ |
부속시설-1 |
| IEC 60068-2-78:2025 |
Environmental testing - Part 2-78:
Tests - Test Cab: Damp heat, steady state |
(30 ±2) ℃, (93 ±3) % R.H.
(30 ±2) ℃, (85 ±3) % R.H.
(40 ±2) ℃, (93 ±3) % R.H.
(40 ±2) ℃, (85 ±3) % R.H. |
부속시설-1 |
| IEC60068-2-38:2021 |
Environmental testing - Part 2-38: Tests - Test Z/AD : Composite temperature/humidity cyclic test |
(-10 ~ 65) ℃
(20 ~ 93) % R.H. |
부속시설-1 |
| IEC 60068-2-30:2025 |
Environmental testing - Part 2-30:
Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle) |
(25 ~ 55) ℃ (45 ~ 95) % R.H. |
부속시설-1 |
| IEC 60068-2-2:2025 |
Environmental testing - Part 2-2:
Tests - Test B: Dry Heat |
(30 ~ 100) ℃ |
부속시설-1 |
| IEC 60068-2-14:2023 |
Environmental testing - Part 2-14:
Tests - Test N: Change of temperature
8. Test Nb: Change of temperature with specified rate of change |
(-40 ~ 100) ℃ |
부속시설-1 |
| IEC 60068-2-1:2025 |
Environmental testing - Part 2-1:
Tests - Test A: Cold |
(-40 ～ 5) ℃ |
부속시설-1 |
| EN 50155:2017 |
Railway applications - Rolling stock - Electronic Equipment
5.1.1.2 DC power supply range
5.1.1.3 Temporary DC power supply fluctuation
5.1.1.4 Interruptions of voltage supply
13.4.4 Low temperature start up test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Cyclic damp heat test
13.4.9 Insulation test |
(-40 ~ 125) ℃ (40 ~ 95) % R.H.
Supply voltage(0 ~ 300) V
(0.05 ~ 5.00) kV a.c.
(0.05 ~ 5.00) kV d.c.
0.5 MΩ ~ 9.0 GΩ |
부속시설-1 |
| KS C IEC 60571:2012 |
철도 차량용 전자기기의 개별 요구사항
5.1.1.2 공급 전압의 변동
5.1.1.3 공급 전압의 중단
12.2.4 내한성 시험
12.2.5 내열성 시험
12.2.6 내습 사이클 시험
12.2.10 절연시험
12.2.15 저온 저장 시험 |
(-40 ~ 125) ℃ (40 ~ 95) % R.H.
Supply voltage(0 ~ 300) V
(0.05 ~ 5.00) kV a.c.
(0.05 ~ 5.00) kV d.c.
0.5 MΩ ~ 9.0 GΩ |
부속시설-1 |
| EN50155:2021 |
Railway applications - Rolling stock - Electronic Equipment
5.2.2 Supply voltage range
5.2.3 Temporary supply voltage variation
5.2.4 Interruptions of voltage supply
13.4.4 Low temperature test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Insulation test
13.4.8 Cyclic damp heat test |
(-40 ~ 125) ℃ (40 ~ 95) % R.H.
Supply voltage(0 ~ 300) V
(0.05 ~ 5.00) kV a.c.
(0.05 ~ 5.00) kV d.c.
0.5 MΩ ~ 9.0 GΩ |
부속시설-1 |
