| ▶ 섬유 및 관련제품 |
| KS K 0514:2022 |
천의 질량 측정 방법 : 작은 시험편법 |
0.1 g/m² 이상 |
소재지 |
| 16 CFR 1616 |
Standard for the flammability of children's sleepwear: Sizes 7 through 14(FF 5-74) |
25.4 cm 이상 / 0.1 cm 이상 |
소재지 |
| 16 CFR 1615 |
Standard for the flammability of children's sleepwear: Sizes 0 through 6X(FF 3-71) |
25.4 cm 이상 / 0.1 cm 이상 |
소재지 |
| 16 CFR 1610 |
Standard for the Flammability of Clothing Textiles |
(1 ~ 3) 급 |
소재지 |
| AATCC TM179-2025 |
Test Method for Skew Change in Fabrics After Home Laundering |
(0.0 ~ 100) % |
소재지 |
| AATCC TM150-2025 |
Dimensional Changes of Garments after Home Laundering |
± 100 % |
소재지 |
| AATCC TM135-2025 |
Dimensional Changes of Fabrics after Home Laundering |
± 100 % |
소재지 |
| ASTM D5034-2021 (Reapproved 2025) |
Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) |
(0.1 ~ 10 000) N
0.1 % 이상 |
소재지 |
| ASTM D3786 / D3786M-18 (Reapproved 2023) |
Standard Test Method for Bursting Strength of Textile Fabrics - Diaphragm Bursting strength Tester Method |
(0.1 ~ 1 373) kPa |
소재지 |
| ASTM D3776/D3776M-20 (Reapproved 2025) |
Standard Test Methods for Mass Per Unit Area (Weight) of Fabric |
0.1 g/m² 이상 |
소재지 |
| ASTM D3775-17 (Reapproved 2023) |
Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics |
1 thread / unit length 이상 |
소재지 |
| ASTM D3512/D3512 M-22 |
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
(1 ~ 5) 급 |
소재지 |
| ASTM D1683/D1683M-22 |
Standard test method for failure in sewn seams of woven apparel fabrics |
(2 ~ 10 000) N |
소재지 |
| ASTM D1424-25 |
Standard test method for Tearing Strength of Fabrics by Falling - Pendulum (Elmendorf - Type) Apparatus |
(1 ~ 62) N |
소재지 |
| ASTM D1059-17 (Reapproved 2022) |
Standard Test Method for Yarn Number Based on Short - Length Specimens |
1 thread / unit length 이상 |
소재지 |
| AATCC TM118-2020e |
Test Method for Oil Repellency: Hydrocarbon Resistance |
0.5 이상 |
소재지 |
| AATCC TM 124-2018 |
Smoothness Appearance of Fabrics after Home Laundering |
0.1 급 |
소재지 |
| ASTM D2062-03 (Reapproved 2021) |
Standard Test Methods for Operability of Zippers |
0.1 N 이상 |
소재지 |
| ASTM D2061-07 (Reapproved 2021) |
Standard Test Methods for Strength Tests for Zippers |
0.1 N 이상 |
소재지 |
| ASTM D1230-25 |
Standard Test Method for Flammability of Apparel Textiles |
0.1 s 이상 |
소재지 |
| AATCC/ASTM TS-015 |
Seam Stretchability of Knitted Garments |
0.1 N 이상 / 0.1 % 이상 |
소재지 |
| AATCC/ASTM TS-010 |
Procedure for Determining Pocket Reinforcement |
0.1 N 이상 |
소재지 |
| AATCC TM 88C-2018 |
Crease Retention in Fabrics after Home Laundering |
0.1 급 |
소재지 |
| AATCC TM 88B-2018 |
Seam Smoothness in Fabrics after Home Laundering |
0.1 급 |
소재지 |
| AATCC TM79-2025 |
Test Method for Absorbency of Textiles |
(0 ~ 60) s |
소재지 |
| AATCC TM 35-2018 |
Water Resistance: Rain Test |
0.1 g 이상 |
소재지 |
| AATCC TM22-2024 |
Test Method for Water Repellency: Spray Test |
(0 ~ 100) 급 |
소재지 |
| AATCC TM 197-2022 |
Vertical Wicking Rate of Textiles to Specified Distances |
0.0 mm/s 이상 |
소재지 |
| AATCC TM 193-2017 |
Aqueous Liquid Repellency: Water/Alcohol Solution Resistance Test |
0.5 grade |
소재지 |
| AATCC TM 158-2016 |
Dimensional Changes on Drycleaning in Perchloroethylene: Machine Method |
± 0.1 % |
소재지 |
| AATCC TM130-2025 |
Test Method for Soil Release: Oily Stain Release |
(1 ~ 5) 급 |
소재지 |
| AATCC TM 127-2018 |
Water Resistance: Hydrostatic Pressure Test |
0.1 mm/H₂O 이상 |
소재지 |
| AATCC/ASTM TS-008 |
Procedure for Appearance of apparel and Other Textile End Products After Repeated Home Laundering |
ㅡ |
소재지 |
| ASTM D2261-13 (Reapproved 2024) |
Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine) |
0.1 N 이상 |
소재지 |
| ASTM D2594/D2594M-21 |
Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power |
0.01 % 이상 |
소재지 |
| ASTM D5171-15 (Reapproved 2020) |
Standard Test Method for Impact Resistance of Plastic Sew-Through Buttons |
0.1 N 이상 |
소재지 |
| ASTM D5170-98 (Reapproved 2021) |
Standard Test Method for Peel Strength (“T” Method) of Hook and Loop Touch Fasteners |
0.1 N 이상 |
소재지 |
| ASTM D5169-98 (Reapproved 2021) |
Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
0.1 N/cm² 이상 |
소재지 |
| ASTM D4970/D4970M-2022 |
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester |
(1 ~ 5) 급 |
소재지 |
| ASTM D4966-22 |
Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method) |
1 movement 이상 |
소재지 |
| ASTM D4964-96 (Reapproved 2020) |
Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine) |
0.01 % 이상 |
소재지 |
| ASTM D4846-96 (Reapproved 2021) |
Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
0.1 N 이상 |
소재지 |
| ASTM D434-95 |
Standard Test Method for Resistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam |
0.1 N 이상 |
소재지 |
| ASTM D3886-22 |
Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus) |
1 cycle 이상 |
소재지 |
| ASTM D3885-07a (Reapproved 2024) |
Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method) |
1 cycle 이상 |
소재지 |
| ASTM D3884-22 |
Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
1 cycle 이상 |
소재지 |
| ASTM D3882-08 (Reapproved 2025) |
Standard Test Method for Bow and Skew in Woven and Knitted Fabrics |
0.1 % 이상 |
소재지 |
| ASTM D3774-18 (Reapproved 2024) |
Standard Test Method for Width of Textile Fabric |
0.1 mm 이상 |
소재지 |
| ASTM D3514/3514M-16 (Reapproved 2024) |
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad |
(1 ~ 5) 급 |
소재지 |
| ASTM D629-15 |
Standard Test Methods for Quantitative Analysis of Textiles |
0.1 % 이상 |
소재지 |
| ASTM D7142-05 (Reapproved 2021) |
Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners |
0.1 N 이상 |
소재지 |
| BS EN 14682:2014 |
Safety of children's clothing-Cords and drawstrings on children's
clothing-Specifications |
ㅡ |
소재지 |
| ASTM D3107-07 (Reapproved 2019) |
Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns |
0.01 % 이상 |
소재지 |
| ASTM D7506/D7506M-17 (Reapproved 2025) |
Standard Test Method for Pocket Reinforcement |
0.1 N 이상 |
소재지 |
| BS 3084:2006 |
Slide fasteners (Zips) - Specification |
0.1 N 이상 |
소재지 |
| BS 4323:1979 |
Method for Determination of dimensional change of fabrics induced by free steam |
± 0.1 % |
소재지 |
| ISO 3005:1978 |
Textiles - Determination of dimensional change of fabrics induced by free-steam |
± 0.1 % |
소재지 |
| BS 5722:1991 |
Specification for Flammability performance of fabrics and fabric combinations used in nightwear garments |
0.1 s 이상 |
소재지 |
| BS EN ISO 12945-1:2020 |
Textiles - Determination of fabric propensity to surface pilling, fuzzing or matting - Part 1: Pilling box method |
(1 ~ 5) 급 |
소재지 |
| BS EN ISO 13937-1:2000 |
Textiles – Tear properties of fabrics -
Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
0.1 N 이상 |
소재지 |
| BS EN ISO 13938-1:2019 |
Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension |
1 kPa 이상 |
소재지 |
| BS EN ISO 6330:2021 |
Textiles – Domestic washing and drying procedures for textile testing |
ㅡ |
소재지 |
| ISO 13934-2:2014(E) |
Textiles – Tensile properties of fabrics -
Part 2: Determination of maximum force using the grab method |
0.1 N 이상 |
소재지 |
| ISO 3759:2011(E) |
Textiles - Preparation, Marking and Measuring of Fabric Specimens and Garments in Tests for Determination of Dimensional Change |
± 0.1 % |
소재지 |
| ISO 5077:2007(E) |
Textiles – Determination of dimensional change in washing and drying |
± 0.5 % |
소재지 |
| KS K 0941:2018 |
유아동복의 안전성 – 유아동복에 사용하는 코드 및 조임끈 – 안전 요구 성능 |
ㅡ |
소재지 |
| ▶ 생활용품 |
| 16 CFR 1500.48-2026 |
Technical Requirements for Determining a Sharp point in Toys and other Articles Intended for use by Children under 8 Years of Age |
육안평가 |
소재지 |
| 16 CFR 1500.49-2026 |
Technical Requirements for Determining a Sharp Metal or Glass Edge in Toys and other Articles Intended for use by Children under 8 Years of Age |
육안평가 |
소재지 |
| 16 CFR 1500.51-2026 |
Test Methods for Simulating use and abuse of Toys and other Articles Intended for use by Children 18 Months of Age or less
e) Torque test
f) Tension test |
육안평가
(0.1 ~ 0.8) N·m
(1 ~ 500) N |
소재지 |
| 16 CFR 1500.52-2026 |
Test Methods for Simulating use and abuse of Toys and other Articles Intended for use by Children over 18 but not over 36 Months of Age
e) Torque test
f) Tension test |
육안평가
(0.1 ~ 0.8) N·m
(1 ~ 500) N |
소재지 |
| 16 CFR 1500.53-2026 |
Test Methods for Simulating use and abuse of Toys and other Articles Intended for use by Children over 36 but not over 96 Months of Age
e) Torque test
f) Tension test |
육안평가
(0.1 ~ 0.8) N·m
(1 ~ 500) N |
소재지 |
| 16 CFR 1501-2026 |
Method for Identifying Toys and other Articles Intended for use by Children under 3 years of Age which present Choking, Aspiration, or Ingestion Hazards because of small Parts |
육안평가 |
소재지 |
| ▶ 실내 및 기타환경 |
| EN 14582:2016 |
Characterization of waste - Halogen and sulfur content – Oxygen combustion in closed systems and determination methods |
30 mg/kg 이상 |
소재지 |
| IEC 62321-4:2013+AMD1:2017 CSV |
Determination of certain substances in electronical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS
(Excepted : CV-AAS, CV-AFS, ICP-MS) |
(4 ~ 1 000) mg/kg |
소재지 |
| IEC 62321-5:2013 |
Determination of certain substances in electronical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS
(Excepted : CV-AAS, CV-AFS, ICP-MS) |
10 mg/kg 이상 |
소재지 |
| IEC 62321-6:2015 |
Determination of certain substances in electronical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography -mass spectrometry(GC-MS) |
individual : (20 ~ 2 000) mg/kg
Total : (1 300 ~ 5 000) mg/kg |
소재지 |
| IEC 62321-8:2017 |
Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
(Excepted Py/TD-GC-MS) |
(50 ~ 2 000) mg/kg |
소재지 |
| CEN/TR 12471:2022 |
Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin |
Positive/Inconclusive/Negative |
소재지 |
| KS M 0180:2024 |
산화 열가수 분해후 이온 크로마토그래프에 의한 할로젠(F, Cl, Br) 및 황의 시험방법 |
(25 ~ 1 500) mg/kg |
소재지 |
| IEC 62321-7-1:2015 |
Determination of certain substances in electrotechnical products – Part 7-1: Hexavalent chromium – Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method |
< 0.10 μg/cm² : Negative
0.10 ~ 0.13 μg/cm² : Inconclusive
> 0.13 μg/cm² : Positive |
소재지 |
| IEC 62321-3-2:2020 RLV |
Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC) |
(25 ~ 1 500) mg/kg |
소재지 |
| IEC 62321-3-1:2013 |
Determination of certain substances in electrotechnical products – Part 3-1: Screening – Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry |
Pb, Hg : (100 ~ 1 500) mg/kg
Cr : (100 ~ 500) mg/kg
Cd : (50 ~ 150) mg/kg
Br : 200 mg/kg 이상 |
소재지 |
| IEC 62321-7-2:2017 |
Determination of certain substances in electrotechnical products – Part 7-2: Hexavalent
chromium – Determination of hexavalent chromium (Cr(VI) in polymers and electronics by the colorimetric method |
2 mg/kg 이상 |
소재지 |
| EPA 200.8 |
Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma - Mass Spectrometry |
Al, Cu, Zn : 5 μg/L 이상
Others : 1 μg/L 이상 |
소재지 |
| EPA 200.7 |
Determination of Metals and Trace Elements in Water and Wastes by Inductively Coupled Plasma-Atomic Emission Spectrometry |
Ca, Mg, K, Na : 2 mg/L 이상
Hg : 0.05 mg/L 이상
Others : 0.1 mg/L 이상 |
소재지 |
| EN 1811:2023 |
Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
0.2 μg·cm²·week-1 이상
0.5 μg·cm²·week-1 이상 |
소재지 |
| EN 12472:2020 |
Method for the simulation of accelerated wear and corrosion for the detection of nickel release from coated items |
0.2 μg/cm²/week 이상 |
소재지 |
| EN 1122:2001 |
Plastics. Determination of cadmium. Wet decomposition method 6.3.2 Method B |
(10 ~ 3 000) mg/kg |
소재지 |
| ▶ 섬유 |
| FZ/T 1026-2017 |
Textiles-Quantitative chemical analysis-Multinary fibre mixtures |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.22-2009 |
Textiles-Quantitative chemical analysis - Part 22 : Mixtures of viscose or certain types of cupro or modal or lyocell and flax of ramie fibres (method using formic acid and zinc chloride) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.20-2009 |
Textiles-Quantitative chemical analysis - Part 20 : Mixtures of elastane and some other fibres (method of using dimethylacetamide) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.18-2009 |
Textiles-Quantitative chemical analysis - Part 18 : Mixtures of silk and wool or hair (method using sulfuric acid) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.17-2009 |
Textiles-Quantitative chemical analysis - Part 17 : Mixtures of chlorofibers (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.14-2009 |
Textiles-Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) |
(0.1 ~ 100) % |
소재지 |
| ISO 105-X12:2016(E) |
Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing |
(1 ~ 5) 급 |
소재지 |
| ISO 105-X16:2016(E) |
Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas |
(1 ~ 5) 급 |
소재지 |
| ISO 105-X18:2007(E) |
Textiles - Tests for colour fastness -
Part X18: Assessment of the potential phenolic yellowing of materials |
(1 ~ 5) 급 |
소재지 |
| ISO 14184-1:2011 |
Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) |
(16 ~ 3 500) mg/kg |
소재지 |
| ISO 14184-2:2011 |
Textiles - Determination of formaldehyde - Part 2: Released formaldehyde (vapour absorption method) |
(16 ~ 3 500) mg/kg |
소재지 |
| ISO 3071:2020 |
Textiles — Determination of pH of aqueous extract |
1 - 14 |
소재지 |
| GB/T 2912.1-2009 |
Textiles - Determination of formaldehyde –
Part 1:Free and hydrolyzed formaldehyde(water extraction method) |
(16 ~ 3 500) mg/kg |
소재지 |
| GB/T 7573:2025 |
Textiles - Determination of pH of the aqueous extract |
1 - 14 |
소재지 |
| GB/T 17592:2024 |
Textiles—Determination of the banned azo colourants |
5 mg/kg 이상 |
소재지 |
| GB/T 23344-2009 |
Textiles—Determination of 4-aminoazobenzene |
10 mg/kg 이상 |
소재지 |
| ISO 105-C09:2001(E) |
Textiles - Tests for colour fastness -
Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
(1 ~ 5) 급 |
소재지 |
| DIN 54231:2022-09 |
Textiles - Determination of dyes after methanol extraction |
10 mg/kg 이상 |
소재지 |
| KS K 0147:2021 |
염료 및 염색물의 아릴아민 시험방법 |
5 mg/kg 이상 |
소재지 |
| KS K 0733:2022 |
섬유 및 가죽 제품의 펜타클로로페놀(PCP) 함유량 측정 방법 |
0.1 mg/kg 이상 |
소재지 |
| KS K 0734:2019 |
폴리에스테 섬유 제품 중 아릴아민 함유량 시험방법 |
5 mg/kg 이상 |
소재지 |
| KS K 0735:2023 |
텍스타일의 발암성 염료 함유량 시험방법 |
10 mg/kg 이상 |
소재지 |
| KS K 0736:2025 |
텍스타일의 알러지성 분산 염료 함유량 시험방법 |
10 mg/kg 이상 |
소재지 |
| KS K 0737:2019 |
섬유 제품의 유기 주석 화합물 함유량 시험방법 |
0.1 mg/kg 이상 |
소재지 |
| KS K ISO 14184-1:2011 |
텍스타일 -폼알데하이드 측정 - 제1부 : 유리 및 가수분해 폼알데하이드 (증류수 추출법) |
(16 ~ 3 500) mg/kg |
소재지 |
| KS K ISO 14184-2:2011 |
텍스타일 - 폼알데하이드 측정 - 제2부: 방출되는 폼알데하이드(증기 흡착법) |
(16 ~ 3 500) mg/kg |
소재지 |
| KS K ISO 3071:2020 |
텍스타일 - 수성 추출액의 pH 측정 |
1 - 14 |
소재지 |
| AATCC TM104-2025 |
Test Method for Colorfastness to Water Spotting |
(1 ~ 5) 급 |
소재지 |
| AATCC TM106-2025 |
Test Method for Colorfastness to Water: Sea |
(1 ~ 5) 급 |
소재지 |
| ISO 105-N02:1993(E) |
Textiles – Tests for colour fastness -
Part N02: Colour fastness to bleaching: Peroxide |
(1 ~ 5) 급 |
소재지 |
| ISO 105-N01:1993(E) |
Textiles - Tests for colour fastness -
Part N01: Colour fastness to bleaching: Hypochlorite |
(1 ~ 5) 급 |
소재지 |
| ISO 105-E04:2013(E) |
Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration |
(1 ~ 5) 급 |
소재지 |
| AATCC/ASTM TS-001 |
Quick Methods for Colorfastness to Chlorine and Non-Chlorine Breach |
(1 ~ 5) 급 |
소재지 |
| AATCC TM8-2016e(2022)e |
Test Method for Colorfastness to Crocking: Crockmeter |
(1 ~ 5) 급 |
소재지 |
| AATCC TM15-2021 |
Test Method for Colorfastness to Perspiration |
(1 ~ 5) 급 |
소재지 |
| AATCC TM16.3-2020 |
Test Method for Colorfastness to Light: Xenon-Arc |
(1 ~ 5) 급 |
소재지 |
| AATCC TM20-2021 |
Test Method for Fiber Analysis: Qualitative |
- |
소재지 |
| AATCC TM20A-2021 |
Test Method for Fiber Analysis: Quantitative |
(0.1 ~ 100) % |
소재지 |
| AATCC Test Method 61-2013 |
Colorfastness to Laundering: Accelerated |
(1 ~ 5) 급 |
소재지 |
| AATCC Test Method 81-2022 |
pH of the Water-Extract from Wet Processed Textiles |
1 - 14 |
소재지 |
| AATCC TM107-2022 |
Colorfastness to Water |
(1 ~ 5) 급 |
소재지 |
| BS EN ISO 14362-1:2017 |
Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants accessible with and without extracting the fibres |
5 mg/kg 이상 |
소재지 |
| BS EN ISO 14362-3:2017 |
Textiles. Methods for determination of certain aromatic amines derived from azo colorants. Detection of the use of certain azo colorants, which may release 4-aminoazobenzene |
10 mg/kg 이상 |
소재지 |
| ISO 1833-22:2020 |
Textiles-Quantitative chemical analysis - Part 22 : Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-20:2018 |
Textiles-Quantitative chemical analysis - Part 20 : Mixtures of elastane with certain other fibres (method using dimethylacetamide) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-18:2020 |
Textiles-Quantitative chemical analysis - Part 18 :Mixtures of silk with wool or other animal hair (method using sulfuric acid) |
(0.1 ~ 100) % |
소재지 |
| ISO 105-C10:2006(E) |
Textiles - Tests for colour fastness -Part C10: Colour fastness to washing with soap or soap and soda |
(1 ~ 5) 급 |
소재지 |
| ISO 105-G03:1993(E) |
Textiles – Tests for colour fastness - Part G03: Colour fastness to ozone in the atmosphere |
(1 ~ 5) 급 |
소재지 |
| ISO 105-X11:1994(E) |
Textiles - Tests for colour fastness - Part X11: Colour fastness to hot pressing |
(1 ~ 5) 급 |
소재지 |
| ISO 105-B02:2014(E) |
Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
(1 ~ 8) 급 |
소재지 |
| ISO 105-C06:2010(E) |
Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering |
(1 ~ 5) 급 |
소재지 |
| ISO 105-D01:2010(E) |
Textiles - Tests for colour fastness - Part D01: Colour fastness to drycleaning using perchloroethylene solvent |
(1 ~ 5) 급 |
소재지 |
| ISO 105-E01:2013(E) |
Textiles - Tests for colour fastness - Part E01: Colour fastness to water |
(1 ~ 5) 급 |
소재지 |
| ISO 105-E02:2013(E) |
Textiles – Tests for colour fastness -
Part E02: Colour fastness to sea water |
(1 ~ 5) 급 |
소재지 |
| ISO 105-E03:2010(E) |
Textiles - Tests for colour fastness -
Part E03: Colour fastness to chlorinated water (swimming-pool water) |
(1 ~ 5) 급 |
소재지 |
| AATCC Test Method 109-2016 |
Colorfastness to Ozone in the Atmosphere under Low Humidities |
(1 ~ 5) 급 |
소재지 |
| AATCC TM116-2018e(2022)e |
Test Method for Colorfastness to Crocking: Rotary Vertical Crockmeter |
(1 ~ 5) 급 |
소재지 |
| ISO 1833-11:2017 |
Textiles-Quantitative chemical analysis - Part 11 : Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-12:2020 |
Textiles-Quantitative chemical analysis - Part 12 : Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-13:2019 |
Textiles-Quantitative chemical analysis - Part 13 : Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-14:2019 |
Textiles-Quantitative chemical analysis - Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-17:2019 |
Textiles-Quantitative chemical analysis - Part 17 : Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid) |
(0.1 ~ 100) % |
소재지 |
| GB/T 3920-2024 |
Textiles - Tests for colour fastness - Colour fastness to rubbing |
(1 ~ 5) 급 |
소재지 |
| FZ/T 80007.3-2006 |
Dry wash resistance test method for garments used adhesive interlining |
± 100% |
소재지 |
| GB/T 8629-2017 |
Textiles - Domestic washing and drying procedures for textile testing |
± 100 % |
소재지 |
| FZ/T 1057.3-2007 |
The methods for identification of textile fibers - Part 3 : Microscopy |
- |
소재지 |
| FZ/T 1057.4-2007 |
The methods for identification of textile fibers - Part 4 : Solubility |
- |
소재지 |
| GB/T 2910.1-2009 |
Textiles-Quantitative chemical analysis - Part 1 : General principles of testing |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.2-2009 |
Textiles-Quantitative chemical analysis - Part 2 : Ternary fibre mixture |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.3-2009 |
Textiles-Quantitative chemical analysis - Part 3 : Mixtures of acetate and certain other fibres (method using acetone) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.4-2022 |
Textiles- Quantitative chemical analysis - Part 4: Mixtures of certain protein fibres with certain other fibres(method using hypochlorite) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.6-2009 |
Textiles-Quantitative chemical analysis - Part 6 : Mixtures of viscose or certain type of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.7-2009 |
Textiles-Quantitative chemical analysis - Part 7 : Mixtures of polyamide and certain other fibres (method using formic acid) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.8-2009 |
Textiles-Quantitative chemical analysis - Part 8 : Mixtures of acetate and triacetate fibres (method using acetone) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.9-2024 |
Textiles-Quantitative chemical analysis - Part 9 : Mixtures of acetate with certain other fibres (method using benzyl alcohol) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.10-2009 |
Textiles-Quantitative chemical analysis - Part 10 : Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.11-2024 |
Textiles-Quantitative chemical analysis - Part 11 : Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.12-2023 |
Textiles-Quantitative chemical analysis - Part 12 : Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) |
(0.1 ~ 100) % |
소재지 |
| GB/T 2910.13-2009 |
Textiles-Quantitative chemical analysis - Part 13 : Mixtures of certain chlorofibers and certain other fibres (method using carbon disulfide/acetone) |
(0.1 ~ 100) % |
소재지 |
국가기술표준원고시 제2024-0027호(2024.03.07)
안전기준준수대상 생활용품 안전기준 부속서1 |
가정용 섬유제품
5.1 폼알데하이드
5.3 유기주석화합물
5.6 알러지성 염료
5.7 pH |
(16 ~ 3 500) mg/kg
0.1 mg/kg 이상
10 mg/kg 이상
1 - 14 |
소재지 |
| ISO 1833-10:2019 |
Textiles-Quantitative chemical analysis - Part 10 : Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-9:2019 |
Textiles-Quantitative chemical analysis - Part 9 : Mixtures of acetate acetate with certain other fibres (method using benzyl alcohol) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-8:2006 |
Textiles-Quantitative chemical analysis - Part 8 : Mixtures of acetate and triacetate fibres (method using acetone) |
(0.1 ~ 100) % |
소재지 |
| AATCC TM117-2024 |
Test Method for Colorfastness to Heat: Dry (Excluding Pressing) |
(1 ~ 5) 급 |
소재지 |
| AATCC Test Method 132-2013 |
Colorfastness to Drycleaning |
(1 ~ 5) 급 |
소재지 |
| AATCC TM133-2020e |
Test Method for Colorfastness to Heat: Hot Pressing |
(1 ~ 5) 급 |
소재지 |
| AATCC TM143-2018t |
Test Method for Appearance of Apparel and Other Textile End Products after Home Laundering |
(1 ~ 5) 급 |
소재지 |
| AATCC Test Method 162-2011 |
Colorfastness to Water: Chlorinated Pool |
(1 ~ 5) 급 |
소재지 |
| AATCC TM163-2013(2020)e2 |
Test Method for Colorfastness to Storage: Dye Transfer |
(1 ~ 5) 급 |
소재지 |
| AATCC Test Method 172-2016 |
Colorfastness to Powdered Non-Chlorine Bleach in Home Laundering |
(1 ~ 5) 급 |
소재지 |
| AATCC TM188-2010e3(2017)e |
Test Method for Colorfastness to Sodium Hypochlorite Bleach in Home Laundering |
(1 ~ 5) 급 |
소재지 |
| AATCC TM23-2015e(2020) |
Test Method for Colorfastness to Burnt Gas Fumes |
(1 ~ 5) 급 |
소재지 |
| FZ/T 1057.1-2007 |
The methods for identification of textile fibers - Part 1 : General introduction |
- |
소재지 |
| FZ/T 1057.2-2007 |
The methods for identification of textile fibers - Part 2 : Burning behavior |
- |
소재지 |
| GB/T 3921-2008 |
Textiles - Tests for colour fastness - Colour fastness to washing with soap or soap and soda |
(1 ~ 5) 급 |
소재지 |
| GB/T 3922-2013 |
Textiles - Testing method for colour fastness to perspiration |
(1 ~ 5) 급 |
소재지 |
| GB/T 5711-2015 |
Textiles - Tests for colour fastness - Colour fastness to drycleaning using perchloroethylene solvent |
(1 ~ 5) 급 |
소재지 |
| GB/T 5713-2013 |
Textiles - Tests for colour fastness - Colour fastness to water |
(1 ~ 5) 급 |
소재지 |
| GB/T 8427: 2019 |
Textiles－Tests for color fastness－Color fastness to artificial light：Xenon arc |
(1 ~ 8) 급 |
소재지 |
| GB/T 14576-2009 |
Textiles - Tests for colour fastness - Colour fastness to light of textiles wetted with artificial perspiration |
(1~5) 급 |
소재지 |
| ISO 1833-1:2020 |
Textiles-Quantitative chemical analysis - Part 1 : General principles of testing |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-2:2020 |
Textiles-Quantitative chemical analysis - Part 2 : Ternary fibre mixtures |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-3:2020 |
Textiles-Quantitative chemical analysis - Part 3 : Mixtures of acetate with certain other fibres (method using acetone) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-4:2023 |
Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-6:2018 |
Textiles-Quantitative chemical analysis - Part 6 : Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride) |
(0.1 ~ 100) % |
소재지 |
| ISO 1833-7:2017 |
Textiles-Quantitative chemical analysis - Part 7 : Mixtures of polyamide with certain other fibres (method using formic acid) |
(0.1 ~ 100) % |
소재지 |
| JIS L 1041:2011 |
Test methods for resin finished textiles,
8. Free formaldehyde test,
8.1 JIS method, |
(16 ~ 3 500) mg/kg |
소재지 |
| ▶ 유아용품 |
| EN 71-3:2019+A1:2021+A2:2024 |
Safety of toys - Part 3: Migration of certain elements |
Category Ⅰ,Ⅱ
(Cd, As, Hg: 0.15 mg/kg 이상,
Pb: 0.5 mg/kg 이상,
Al, Sb, Ba, B, Co, Cu, Mn, Ni, Se, Sr, Zn:
2 mg/kg 이상)
Catefory Ⅲ
(Cd, As, Hg, Pb, Al, Sb, Ba, B, Co, Cu, Mn, Ni, Se, Sr, Zn: 2 mg/kg 이상) |
소재지 |
| ASTM F963-23 |
Standard Consumer Safety Specification for Toy Safety
4.3.5 Heavy metal
4.3.5.1 Paint and Similar Surface-Coating Materials
4.3.5.2 Toy Substrate Materials |
Modeling Clay
(As, Cr, Hg: 2.5 mg/kg 이상;
Sb: 6 mg/kg 이상;
Ba: 25 mg/kg 이상;
Cd: 5 mg/kg 이상;
Pb: 9 mg/kg 이상;
Se: 50 mg/kg 이상)
Surface Coatings and Substrates Other Than Modeling Clay
(Sb, Cr, Hg: 6 mg/kg 이상;
As: 2.5 mg/kg 이상;
Ba: 100 mg/kg 이상;
Cd: 7.5 mg/kg 이상;
Pb: 9 mg/kg 이상;
Se: 50 mg/kg 이상) |
소재지 |
| KS K 0853:2017 |
피부에 접촉되는 제품에서 방출되는 니켈 측정 시험방법 : 교체 노출법 |
0.5 μg/cm²/week |
소재지 |
| KS G ISO 8124-3:2010 |
완구의 안전성-제3부:특정 원소의 용출 |
모형 제작용 점토 및 그림물감
(As, Cr, Hg: 2.5 mg/kg 이상,
Sb: 6 mg/kg 이상,
Ba: 25 mg/kg 이상,
Cd: 5 mg/kg 이상,
Pb: 9 mg/kg 이상,
Se: 50 mg/kg 이상)
모형 제작용 점토 및 그림물감을 제외한 1절에 명시된 재질
(Sb, Cr, Hg: 6 mg/kg 이상,
As: 2.5 mg/kg 이상,
Ba: 100 mg/kg 이상,
Cd: 7.5 mg/kg 이상,
Pb: 9 mg/kg 이상,
Se: 50 mg/kg 이상) |
소재지 |
| CPSC-CH-C1001-09.4:2018 |
Standard Operating Procedure for Determination of Phthalates |
0.01 % 이상 |
소재지 |
| CPSC-CH-E1003-09.1:2011 |
Standard Operating Procedure for Determining Lead(Pb) in Paint Other Similar Surface Coatings |
10 mg/kg 이상 |
소재지 |
| CPSC-CH-E1002-08.3:2012 |
Standard Operating Procedure for Determining Total Lead(Pb) in Nonmetal Children’s Products |
10 mg/kg 이상 |
소재지 |
| CPSC-CH-E1001-08.3:2012 |
Standard Operating Procedure for Determining Total Lead(Pb) in Children’s Metal Products (Including Children’s Metal Jewelry) |
10 mg/kg 이상 |
소재지 |
