| ▶ 산업용 전기기기 |
| KS C IEC 60204-1:2016 |
기계류의 안전성-기계의 전기장비 - 제 1부: 일반요구사항
18.2.2 시험 1 - 보호접지회로의 연속성검증
18.3 절연저항 시험
18.4 전압시험
18.5 잔류전압 보호 |
보호접지회로의 연속성검증: (0.2 ~ 10) A
절연저항: DC 500 V Max. 190 ㏁
전압시험: Max. AC 5 kV, Max. 10 mA
잔류전압 보호: Max. 60 V |
소재지 |
| IEC 60204-1:2016+AMD1:2021 |
Safety of machinery-Electrical equipment of machines - Part 1: General requirements
18.2.2 Test 1 - Verification of the continuity of the protective bonding circuit
18.3 Insulation resistance tests
18.4 Voltage tests
18.5 Protection against residual voltages |
보호접지회로의 연속성검증: (0.2 ~ 10) A
절연저항: DC 500 V Max. 190 ㏁
내전압: Max. AC 5 kV, Max. 10 mA
잔류전압: Max. 60 V |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-60:2019 |
Medical electrical equipment Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
(Exception)
201.8.9.1.7 Material groups classification
201.10.4 Lasers
201.15.4.7.3 Entry of liquids
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEM |
단상: Max. 300 V~
삼상: Max. 500 V3~
온도: Max. 200 ℃ |
소재지 |
| IEC 60601-2-10:2012+AMD1:2016+AMD2:2023 |
Medical electrical equipment – Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
(Exception)
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEM
202 Electromagnetic disturbances – requirements and tests |
단상: Max. 300 V~
삼상: Max. 500 V3~
온도: Max. 200 ℃ |
소재지 |
| IEC 60601-1:2005+AMD1:2012+AMD2:2020 |
Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(Exception)
8.5.5 DEFIBRILLATION-PROOF APPLIED PARTS
8.8.4.2 Resistance to environmental stress
8.9.1.7 Material groups classification
8.9.1.16 Conductive surface coatings
9.5.2 Cathode ray tubes
9.6.3 Hand-transmitted vibration
10.1 X-radiation
10.3 Microwave radiation
10.4 Lasers
11.2 Fire prevention
11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anaesthetics
11.5 ME EQUIPMENT and ME SYSTEMS intended for use in conjunction with flammable agents
11.6.5 Ingress of water or particulate matter
11.6.7 Sterilization
15.4.2 Temperature and overload control devices
15.4.3.4 Primary Lithium batteries, Secondary Lithium batteries
15.4.7.3 Entry of liquids
Annex A 10.4 Lasers
Annex G Protection against hazards of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
단상: Max. 300 V~
삼상: Max. 500 V3~
온도: Max. 200 ℃
보호접지회로의 연속성검증: Max. 6 V, Max. 40 A
내전압: Max. 5 kV, Max. 100 mA |
소재지 |
| IEC 60601-1-6:2010+AMD1:2013+AMD2:2020 |
Medical electrical equipment – Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| CISPR 11:2015+AMD1:2016+AMD2:2019 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
Electromagnetic radiation disturbance Test (6.2.2, 6.3.2, 6.4.2) |
Conducted distrubance Test
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
| EN 55011:2016+AMD1:2017+AMD11:2020 |
Industrial, scientific and medica lequipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
Electromagnetic radiation disturbance Test (6.2.2, 6.3.2, 6.4.2) |
Conducted distrubance Test
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
EN
55011:2016+AMD2:2021 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
Electromagnetic radiation disturbance Test (6.2.2, 6.3.2, 6.4.2) |
Conducted distrubance Test
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
| EN 61000-4-11:2020 |
Electromagnetic compatibility (EMC) –
Part 4-11: Testing and measurement techniques –
Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
전압변동 0 % ~ 100 %
Max 단상 16 A |
소재지 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) –
Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
Max ±15 ㎸ |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) –
Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
Max ±4 ㎸ (단상 /3상) |
소재지 |
| EN 61000-4-5:2014+AMD1:2017 |
Electromagnetic compatibility (EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test
(Exception)
Coupling/decoupling networks for interconnection lines (6.3.3)
Annex A |
Max ±4 ㎸ (단상 / 3상) |
소재지 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
주파수 범위 : 0.15 ㎒ ~ 80 ㎒
인가 전압 : 1 V ~ 10 V |
소재지 |
| EN 61000-6-2:2019 |
Electromagnetic compatibility (EMC) –
Part 6-2: Generic standards – Immunity standard for industrial environments
(exception)
Power-frequency magnetic field (Table 1 - 1.1)
Radio-frequency electromagnetic field. Amplitude modulated Test (Table 1 - 1.2, 1.3)
Surge test of Signal/control ports (Table 2 - 2.2) |
정전기 시험 : Max ±8 ㎸
전기적빠른과도현상, 버스트 시험 : Max ±2 ㎸ (단상/3상)
서지 시험 : Max ±2 ㎸ (단상/3상)
전도성 RF 전자기장내성시험 : 0.15 ㎒ ~ 80 ㎒, 10 V
전압강하, 순간정전 : 0 % ~ 100 %, Max 단상 16 A |
소재지 |
| EN 61000-6-4:2019 |
Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments
Conducted Emission Test (Table 4) |
Conducted distrubance Test
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) –
Part 4-11: Testing and measurement techniques –
Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
전압변동 0 % ~ 100 %
Max 단상 16 A |
소재지 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) –
Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
Max ±15 ㎸ |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) –
Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
Max ±4 ㎸ (단상 / 3상) |
소재지 |
| IEC 61000-4-5:2014+AMD1:2017 |
Electromagnetic compatibility (EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test
(Exception)
Coupling/decoupling networks for interconnection lines (6.3.3)
Annex A |
Max ±4 ㎸ (단상 /3상) |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
주파수 범위 : 0.15 ㎒ ~ 80 ㎒
인가 전압 : 1 V ~ 10 V |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) –
Part 6-2: Generic standards – Immunity standard for industrial environments
(exception)
Power-frequency magnetic field (Table 1 - 1.1)
Radio-frequency electromagnetic field. Amplitude modulated Test (Table 1 - 1.2, 1.3)
Surge test of Signal/control ports (Table 2 - 2.2) |
정전기 시험 : Max ±8 ㎸
전기적빠른과도현상, 버스트 시험 : Max ±2 ㎸ (단상/3상)
서지 시험 : Max ±2 ㎸ (단상/3상)
전도성 RF 전자기장내성시험 : 0.15 ㎒ ~ 80 ㎒, 10 V
전압강하, 순간정전 : 0 % ~ 100 %, Max 단상 16 A |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments
Conducted Emission Test (Table 4) |
전도성 방해 시험
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) – 제4-11부: 시험 및 측정기술 – 전압 강하, 순간 정전, 전압 변동 내성 시험 |
전압변동 0 % ~ 100 %
Max 단상 16 A |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) – 제4-2부: 시험 및 측정기술 – 정전기 방전 내성 시험 |
Max ±15 ㎸ |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) – 제4-4부: 시험 및 측정기술 – 전기적 빠른 과도현상, 버스트 내성 시험 |
Max ±4 ㎸ (단상 / 3상) |
소재지 |
| KS C 9610-4-5:2020 |
전자파적합성(EMC) – 제 4-5부: 시험 및 측정기술 – 서지 내성 시험
(제외항목)
상호 접속 선로에 대한 결합/감결합 회로망 (6.3.3)
부속서 A |
Max ±4 ㎸ (단상 / 3상) |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) – 제 4-5부: 시험 및 측정기술 – 서지 내성 시험
(제외항목)
상호 접속 선로에 대한 결합/감결합 회로망 (6.3.3)
부속서 A |
Max ±4 ㎸ (단상 / 3상) |
소재지 |
| KS C 9610-4-6:2020 |
주파수 범위 : 0.15 ㎒ ~ 80 ㎒
인가 전압 : 1 V ~ 10 V |
주파수 범위 : 0.15 ㎒ ~ 80 ㎒
인가 전압 : 1 V ~ 10 V |
소재지 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) – 제 6-2부: 일반기준 – 산업 환경에서 사용하는 기기의 전자파 내성 표준
(제외항목)
전원 주파수 자기장 (표 1 - 1.1)
방사선 RF 전자기장 (표 1 - 1.2)
신호 및 제어 포트의 서지 (표2 - 2.2) |
정전기 시험 : Max ±8 ㎸
전기적빠른과도현상, 버스트 시험 : Max ±2 ㎸ (단상/3상)
서지 시험 : Max ±2 ㎸ (단상/3상)
전도성 RF 전자기장내성시험 : 0.15 ㎒ ~ 80 ㎒, 10 V
전압강하, 순간정전 : 0 % ~ 100 %, Max 단상 16 A |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) – 제 6-4부: 일반표준 – 산업 환경에서의 전자파 방출 표준
전도성 방해 시험 (표 4) |
전도성 방해 시험
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM)기기 – 무선 주파수 방해 특성 – 허용기준 및 측정방법
(제외항목)
전자파 방사성 방해 시험 (6.2.2, 6.3.2, 6.4.2) |
전도성 방해 시험
주파수 범위 : 150 ㎑ ~ 30 ㎒
전압 : Max 400 V
전류 : Max 200 A |
소재지 |
