| ▶ 전기재료 및 부품 |
| IEC 62619:2022 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for secondary lithium cells and batteries, for use in industrial applications
[Exception]
7.3.2 Internal short-circuit test (cell)
Annex B
Procedure of propagation test by laser irradiation |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃ |
소재지-1 |
| KC 10031:2023 |
사용후 전지의 재사용을 위한 리튬이차전지의 안전 요구사항 |
DC 전압: (0 ~ 1 500) V
DC 전류: (0 ~ 1 000) A
온도: (-40 ~ 85) ℃ |
소재지-1 |
국토교통부 고시 제2025-492호
(2025.09.10.) |
자동차 및 자동차부품의 성능과 기준 시행세칙
[별표1] 제 48호 구동축전지 안전성시험
[제외]
48.7.4.3.4
단락시험의 실차 단위시험
48.7.5.3.5.1 ~ 48.7.5.3.5.3
과충전시험의 실차 단위시험
48.7.6.3.5.1 ~ 48.7.5.3.5.3
과방전시험의 실차 단위시험
48.7.7.2.2, 48.7.7.3.2
과열방지시험의 실차 단위시험
48.7.8.3.1
과전류시험의 실차 단위시험
48.7.10 기계적 충격시험
48.8.9 충격시험
[별표1] 제 48의2호 이륜자동차의 구동축전지 안전성시험
(적용 제외)
48의2.7.4.3.4
단락시험의 실차단위시험
48의2.7.5.3.5.1 ~ 48의2.7.5.3.5.3
과충전시험의 실차 단위시험
48의2.7.6.3.5.1 ~ 48의2.7.6.3.5.3
과방전시험의 실차 단위시험
48의2.7.7.2.2, 48의2.7.7.3.2
과열방지시험의 실차 단위시험
48의2.7.8.3.1
과전류시험의 실차 단위시험 |
DC 전압: (0 ~ 1 500) V
DC 전류: (0 ~ 1 000) A
온도: (-40 ~ 85) ℃
압축: (5 ~ 500) kN
주파수: (5 ~ 1 700) Hz
가속도: (2 ~ 980) ㎨ |
소재지-1 |
| SPS-C KBIA-10104-03-7312:2025 |
에너지저장시스템용 리튬이차전지시스템 – 성능과 안전 |
DC 전압: (0 ~ 1 500) V
DC 전류: (0 ~ 1 000) A
온도: (-40 ~ 85) ℃ |
소재지-1 |
| ECE Regulation No.100 Rev.3 |
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9C Mechanical shock
Annex 9F External short circuit protection
3.1.(d) For testing with a complete vehicle
Annex 9G Overcharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9H Over-discharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9I Over-temperature protection
5 ~ 6 complete vehicle test
Annex 9J Over-current protection
5 Overcurrent during charging using breakout harness. |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Compression: (5 ~ 500) kN
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ECE Regulation No.100 Rev.3 Amend.1 |
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9C Mechanical shock
Annex 9F External short circuit protection
3.1.(d) For testing with a complete vehicle
Annex 9G Overcharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9H Over-discharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9I Over-temperature protection
5 ~ 6 complete vehicle test
Annex 9J Over-current protection
5 Overcurrent during charging using breakout harness. |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Compression: (5 ~ 500) kN
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ECE Regulation No.100 Rev.3 Amend.2 |
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9C Mechanical shock
Annex 9F External short circuit protection
3.1.(d) For testing with a complete vehicle
Annex 9G Overcharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9H Over-discharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9I Over-temperature protection
5 ~ 6 complete vehicle test
Annex 9J Over-current protection
5 Overcurrent during charging using breakout harness. |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Compression: (5 ~ 500) kN
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ECE Regulation No.100 Rev.3 Amend.3 |
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9C Mechanical shock
Annex 9F External short circuit protection
3.1.(d) For testing with a complete vehicle
Annex 9G Overcharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9H Over-discharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9I Over-temperature protection
5 ~ 6 complete vehicle test
Annex 9J Over-current protection
5 Overcurrent during charging using breakout harness. |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Compression: (5 ~ 500) kN
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ECE Regulation No.100 Rev.3 Amend.4 |
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9C Mechanical shock
Annex 9F External short circuit protection
3.1.(d) For testing with a complete vehicle
Annex 9G Overcharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9H Over-discharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9I Over-temperature protection
5 ~ 6 complete vehicle test
Annex 9J Over-current protection
5 Overcurrent during charging using breakout harness. |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Compression: (5 ~ 500) kN
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ECE Regulation No.100 Rev.3 Amend.5 |
Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9C Mechanical shock
Annex 9F External short circuit protection
3.1.(d) For testing with a complete vehicle
Annex 9G Overcharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9H Over-discharge protection
3.2.1 ~ 3.2.3
vehicle-based test
Annex 9I Over-temperature protection
5 ~ 6 complete vehicle test
Annex 9J Over-current protection
5 Overcurrent during charging using breakout harness. |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Compression: (5 ~ 500) kN
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ECE Regulation No.136 Rev.1 |
Uniform provisions concerning the approval of vehicles of category L with regard to specific requirements for the electric power train, Annex 9: REESS test procedures
[Exception]
Annex 9D Mechanical shock 3.2.(a) |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ST/SG/AC.10/11/Rev.8:2023 |
United Nations Recommendation on the Transport of Dangerous Goods, Manual of Tests and Criteria Eighth revised edition, Section 38.3: Lithium metal and lithium ion batteries |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Atmospheric Pressure: (3 ~ 20) kPa
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| ST/SG/AC.10/11/Rev.8/Amend.1:2025 |
United Nations Recommendation on the Transport of Dangerous Goods, Manual of Tests and Criteria Eighth revised edition, Section 38.3: Lithium metal and lithium ion batteries |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃
Atmospheric Pressure: (3 ~ 20) kPa
Frequency: (5 ~ 1 700) Hz
Acceleration: (2 ~ 980) ㎨ |
소재지-1 |
| KS R 1204:2019 |
전기버스용 리튬이차전지 배터리 팩 및 시스템 – 성능 요구사항 및 시험방법 |
DC 전압: (0 ~ 1 500) V
DC 전류: (0 ~ 1 000) A
온도: (-40 ~ 85) ℃ |
소재지-1 |
| KS C IEC 62620:2023 |
알칼리 또는 기타 비산성 전해질을 포함하는 이차전지 셀 및 전지 – 산업용으로 사용되는 리튬이차전지 셀 및 전지 |
DC 전압: (0 ~ 1 500) V
DC 전류: (0 ~ 1 000) A
온도: (-40 ~ 85) ℃ |
소재지-1 |
| KS C IEC 62619:2022 |
알칼리 또는 기타 비산성 전해질을 포함하는 이차전지 셀 및 전지 – 산업용 리튬이차전지 셀 및 전지의 안전 요구사항
[제외]
7.3.2 내부단락 시험(셀)
부속서 B
레이저 방사에 의한 전이 시험 절차 |
DC 전압: (0 ~ 1 500) V
DC 전류: (0 ~ 1 000) A
온도: (-40 ~ 85) ℃ |
소재지-1 |
| IEC 62620:2014+ AMD1:2023 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for use in industrial applications |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃ |
소재지-1 |
| IEC 62620:2014 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and batteries for use in industrial applications |
DC Voltage: (0 ~ 1 500) V
DC Current: (0 ~ 1 000) A
Temperature: (-40 ~ 85) ℃ |
소재지-1 |
| ▶ 계측기기 |
| EN IEC 61010-2-040:2021 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
[Exception]
7.105 Pressure-retaining parts of a door
13.1 Poisonous and injurious gases and substances
13.101 Other HAZARDS arising from the use of toxic sterilants |
Input voltage(AC):
Max. 500 V
Input Frequency:
(50/60) Hz
Leakage current:
Max. 500 mA
Dielectric strength
test: 10 kV
Humidity:
Max. 95 % R.H.
Earth continuity:
6 V, 60 A
Temperature:
Max. 200 ℃
Pressure:
Max. 35 MPa |
소재지 |
| EN IEC 61010-031:2023 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
[Exception]
11.3 Specially protected probe assemblies |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN IEC 61010-2-030:2021+A11:2021 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 2-030: Particular requirements for testing and measuring circuits
[Exception]
101.3 Protection against mismatches of inputs and ranges |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| KS C IEC 61010-1:2018 |
측정, 제어 및 실험실용
전기기기의 안전요구사항
제1부 : 일반요구사항
[제외항목]
10.5.3 정련재료 2) KS M ISO 306, 방법 A의 비키트(Vicat)
11.7 유압과 누설
12.3 자외선 복사
12.5.2 초음파압
13.2.3 음극선관의 파열 |
입력 전압(교류): 500 V 이하
입력 주파수: (50/60) Hz
누설 전류: 500 mA 이하
내전압 시험: 10 kV
습도: 95 % R.H. 이하
접지 연속성: 6 V, 60 A
온도: 200 ℃ 이하 |
소재지 |
| IEC 61010-2-101:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| IEC 61010-2-101:2015 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| EN IEC 61010-2-101:2022+A11:2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| EN IEC 61010-2-010:2020 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 2-010: Particular requirements for laboratory equipment for the heating of materials
[Exception]
5.4.4.101 Cleaning and decontamination |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 61010-2-040:2020 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
[Exception]
7.105 Pressure-retaining parts of a door
13.1 Poisonous and injurious gases and substances
13.101 Other HAZARDS arising from the use of toxic sterilants |
Input voltage(AC):
Max. 500 V
Input Frequency:
(50/60) Hz
Leakage current:
Max. 500 mA
Dielectric strength
test: 10 kV
Humidity:
Max. 95 % R.H.
Earth continuity:
6 V, 60 A
Temperature:
Max. 200 ℃
Pressure:
Max. 35 MPa |
소재지 |
| IEC 61010-2-030:2023 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 2-030: Particular requirements for equipment having testing or measuring circuits
[Exception]
101.3 Indicating devicesranges |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 61010-2-020:2016 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 2-020: Particular requirements for laboratory centrifuges
[Exception]
7.7 Protection against expelled parts or projected parts
13 Protection against liberated gases, explosion and implosion and escape of microbiological materials
Annex AA : Dynamic microbiological test method for BIOSEALS |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| EN 61010-1:2010+A1:2019 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 1: General requirements
[Exception]
10.5.3 Insulating material 2) The Vicat softening test of ISO 306, method A120
11.7 Fluid pressure and leakage
12.3 Ultraviolet (UV) radiation
12.5.2 Ultrasonic pressure
13.2.3 Implosion of cathode ray tubes |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 61010-2-091:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 2-091: Particular requirements for cabinet X-ray systems |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 61010-2-081:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use –
Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| IEC 61010-2-051:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| IEC 61010-031:2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test
[Exception]
11.3 Specially protected probe assemblies |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 61010-2-010:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 2-010: Particular requirements for laboratory equipment for the heating of materials
[Exception]
5.4.4.101 Cleaning and decontamination |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 61010-2-020:2006 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 2-020: Particular requirements for laboratory centrifuges
[Exception]
7.6 Protection against expelled parts or projected parts
13 Protection against liberated gases, explosion and implosion and escape of microbiological materials
Annex AA : Dynamic microbiological test method for BIOSEALS |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| EN 61010-2-020:2017 |
Safety requirements for electrical
equipment for measurement, control,
and laboratory use - Part 2-020:
Particular requirements for laboratory
centrifuges
[Exception]
7.7 Protection against expelled parts or
projected parts
13 Protection against liberated gases,
explosion and implosion and escape of
microbiological materials
Annex AA : Dynamic microbiological
test method for BIOSEALS |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃
Length: Max. 1 500 mm |
소재지 |
| EN IEC 61010-2-091:2021+A11:2021 |
Safety requirements for electrical equipment for measurement, control and laboratory use -
Part 2-091: Particular requirements for cabinet X-ray systems |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 61010-1:2010+A1:2016 |
Safety requirements for electrical equipment for measurement, control, and laboratory use -
Part 1: General requirements
[Exception]
10.5.3 Insulating material 2) The Vicat softening test of ISO 306, method A120
11.7 Fluid pressure and leakage
12.3 Optical radiation
12.5.2 Ultrasonic pressure
13.2.3 Implosion of cathode ray tubes |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 500 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| ▶ 산업용 전기기기 |
| NFPA 79:2024 |
Electrical Standard for Industrial Machinery
18.2 Continuity of the Effective Ground - Fault Current Path,
18.3 Insulation resistance tests
18.4 Voltage Test
18.5 Protection against residual voltages |
Earth Continuity: 10 A, 25 A
Insulation resistance: 500VDC, ( 1 ~ 999)㏁
Voltage Test: 5 kV, 100mA
Protection against residual voltage: 10 kV |
소재지 |
| SEMI S22-0718E |
Safety Guideline for the Electrical Design of Semiconductor Manufacturing Equipment
22.2 Leak current Test for Cord-and-Plug Equipment,
22.3 Earthing Continuity and Continuity of the Protective Bonding Circuit Test,
22.5 Input Test,
22.6 Dielectric Test,
22.13 Temperature Test,
22.15 Finger Probe Test |
Leakage current: 30 mA to 30.0 Ma
Earth Continuity: 10 A, 25 A
Input current: 500 A
Electric Strength:5 Kv, 100 Ma
Temperature: (0 ~ 200)℃
Finger: IEC 6060-1 & IEC 61032 Figure 2, Test probe B |
소재지 |
| SEMI S2-0724 |
Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment
13.6.2 Earthing continuity and continuity of the pretective bonding circult test
27 Sound pressure level |
Earthing continuity and continuity of the pretective bonding circult test: 10A, 25A
Sound pressure level: (30 ~ 130) dB(A), (35 ~ 130) Db(C), (40 ~ 130) Db(Z) |
소재지 |
| EN ISO 11202:2010 |
Acoustics - Noise emitted by machinery and
equipment - Determination of emission sound
pressure levels at a work station and at other
specified positions applying approximate
environmental corrections (ISO 11202:2010) |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz |
부속시설-1 |
| EN IEC 60079-0:2018 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
[Exception]
26.4.5 Degree of protection (IP) by enclosures
26.10 Resistance to UV light |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 %
Weight: 150 ㎏ |
부속시설-1 |
| IEC 60079-31:2022 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
6.1.1.4 IP test |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Weight: 150 ㎏ |
소재지 |
| IEC 60079-31:2013 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
6.1.1.4 IP test |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Weight: 150 ㎏ |
소재지 |
| IEC 60079-26:2014 |
Explosive atmospheres –
Part 26: Equipment with Equipment Protection Level (EPL) Ga |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| EN 60204-1:2018 |
Safety of machinery -
Electrical equipment of machines -
Part 1: General requirements |
Electric Strength: 5 kV, 100 mA
Earth Continuity: 6 V, 60 A
Insulation Resistance: 100 000 ㏁ |
부속시설-1 |
| EN 60079-7:2015 |
Explosive atmospheres –
Part 7: Equipment protection by increased safety ''e''
[Exception]
6.2.3 Additional tests for machines
6.3 Luminaires
6.6.3 Mechanical shock test
6.6.4 Test for ventilation of Level of Protection "eb" battery container
6.7.3 Mechanical shock test
6.7.4 Test for ventilation of Level of Protection "ec" battery container
Annex G (normative) Test procedure for T5(only 8 W),T8, T10 and T12 lamps |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| IEC 60079-11:2023 |
Explosive atmospheres -
Part 11: Equipment protection by intrinsic safety "i" |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| IEC 60079-11:2011 |
Explosive atmospheres -
Part 11: Equipment protection by intrinsic safety "i" |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| IEC 60079-7:2015 |
Explosive atmospheres –
Part 7: Equipment protection by increased safety ''e''
[Exception]
6.2.3 Additional tests for machines
6.3 Luminaires
6.6.3 Mechanical shock test
6.6.4 Test for ventilation of Level of Protection "eb" battery container
6.7.3 Mechanical shock test
6.7.4 Test for ventilation of Level of Protection "ec" battery container
Annex G (normative) Test procedure for T5(only 8 W),T8, T10 and T12 lamps |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| IEC 60204-1:2016 |
Safety of machinery -
Electrical equipment of machines -
Part 1: General requirements |
Electric Strength: 5 kV, 100 mA
Earth Continuity: 6 V, 60 A
Insulation Resistance: 100 000 ㏁ |
부속시설-1 |
| EN 60079-2:2014 |
Explosive atmospheres -
Part 2: Equipment protection by pressurized enclosure "p"
[Exception]
16.4 Purging test for pressurized enclosures with no internal source of release and filling procedure test for static pressurization
16.5 Purging and dilution tests for a pressurized enclosure with an internal source of release
16.7 Tests for an infallible containment system |
Pressure: Max. 3 ㎫
Flow Rate: 1 000 L/min
Time: 1/100 s |
부속시설-1 |
| EN 60079-25:2010 |
Explosive atmospheres -
Part 25: Intrinsically safe electrical systems |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN 60079-26:2015 |
Explosive atmospheres –
Part 26: Equipment with Equipment Protection Level (EPL) Ga |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| EN 60079-31:2014 |
Explosive atmospheres–
Part 31: Equipment dust ignition protection by enclosure "t"
6.1.1.4 IP test |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Weight: 150 ㎏ |
소재지 |
| EN 60079-31:2014 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
[Exception]
6.1.1.4 IP test |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| EN 60079-5:2015 |
Explosive atmospheres -
Part 5: Equipment protection by powder filling "q" |
Distance: 1 000 ㎜
Electric Strength: 5 kV
Pressure: Max. 3 ㎫
Temperature: 500 ℃
Time: 1/100 s
Current: 500 A |
부속시설-1 |
| EN 60079-6:2015 |
Explosive atmospheres –
Part 6: Equipment protection by liquid immersion "o" |
Pressure: Max. 3 ㎫
Time: 1/100 s |
부속시설-1 |
| IEC 60079-0:2017 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
26.4.5 Degree of protection (IP) by enclosures
26.8 Thermal endurance to heat
26.9 Thermal endurance to cold
[Exception]
26.10 Resistance to UV light |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Temp. & Humidity: -40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
소재지 |
| IEC 60079-0:2017 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
[Exception]
26.4.5 Degree of protection (IP) by enclosures
26.10 Resistance to UV light |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| ISO 80079-37:2016 |
Explosive atmospheres –
Part 37: Non-electrical equipment for explosive atmospheres –Non electrical type of protection constructional safety “c”, control of ignition source “b”, liquid immersion “k” |
Pressure: Max. 3 ㎫
Time: 1/100 s |
부속시설-1 |
| ISO 80079-36:2016 |
Explosive atmospheres –
Part 36: Non-electrical equipment for explosive atmospheres –Basic method and requirements |
Temperature: 500 ℃
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Time: 1/100 s |
부속시설-1 |
| ISO 11202:2010 |
Acoustics -- Noise emitted by machinery and equipment -- Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz |
부속시설-1 |
| EN 60079-18:2015 |
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “"m”" |
Distance: 1 000 ㎜
Temperature: 500 ℃
Electric Strength: 5 kV, 100 mA |
부속시설-1 |
| EN 60079-0:2012+A11:2013 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
26.4.5 Degree of protection (IP) by enclosures
26.8 Thermal endurance to heat
26.9 Thermal endurance to cold
[Exception]
26.10 Resistance to light |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Temp. & Humidity: -40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
소재지 |
| IEC TS 60079-46:2017 |
Explosive atmosphere – Part 46: Equipment assemblies |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: (5 ~ 150) N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: (-40 ~ 150) ℃ / (0 ~ 95) % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| EN 60079-28:2015 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
Optical power 1 mW to 500 mW
C1. 5.2.2.2 Optical power
C1. 5.2.2.3 Optical irradiance |
소재지 |
| IEC 60079-28:2015 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
Optical power 1 mW to 500 mW
C1. 5.2.2.2 Optical power
C1. 5.2.2.3 Optical irradiance |
소재지 |
| EN 1493:2022 |
Vehicle lifts |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz |
부속시설-1 |
| IEC 60079-1:2014 |
Explosive atmospheres –
Part 1: Equipment protection by flameproof enclosure “d” |
Input Voltage:
Max. 500 V
Input Frequency:
(50/60) Hz
Input Current:
Max. 20 A
Temperature: 500 ℃
Torque: 5 N⋅m ~
150 N⋅m
Time: 1/100 s
Weight: 150 ㎏
Pressure: Max. 8 ㎫ |
부속시설-1 |
| EN 60079-1:2014 |
Explosive atmospheres –
Part 1: Equipment protection by flameproof enclosure “d” |
Input Voltage:
Max. 500 V
Input Frequency:
(50/60) Hz
Input Current:
Max. 20 A
Temperature: 500 ℃
Torque: 5 N⋅m ~
150 N⋅m
Time: 1/100 s
Weight: 150 ㎏
Pressure: Max. 8 ㎫ |
부속시설-1 |
| IEC 60079-5:2015 |
Explosive atmospheres -
Part 5: Equipment protection by powder filling "q" |
Distance: 1 000 ㎜
Electric Strength: 5 kV
Pressure: Max. 3 ㎫
Temperature: 500 ℃
Time: 1/100 s
Current: 500 A |
부속시설-1 |
| IEC 60079-31:2013 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
[Exception]
6.1.1.4 IP test |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| IEC 60079-31:2022 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
[Exception]
6.1.1.4 IP test |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| KS C IEC 60204-1:2016 |
기계류의 안전성 ―
기계의 전기장비 ―
제1부: 일반 요구사항 |
내전압: 5 kV, 100 mA
접지연속성: 6 V, 60 A
절연저항: 100 000 ㏁ |
부속시설-1 |
| KS I ISO 11202:2010 |
음향 – 기계와 장비의 방사소음 – 근사 환경보정을 적용하여 작업위치와 다른 지정위치에서의 방사음압레벨 결정 |
입력전압: 최대 500 V
입력주파수: (50/60) Hz |
부속시설-1 |
| IEC 60079-6:2015 |
Explosive atmospheres –
Part 6: Equipment protection by liquid immersion "o" |
Pressure: Max. 3 ㎫
Time: 1/100 s |
부속시설-1 |
| EN IEC 60079-15:2019 |
Explosive atmospheres –
Part 15: Equipment protection by type of protection "n" |
Input Voltage:
Max. 500 V
Input Frequency:
(50/60) Hz
Input Current:
Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance:
100 000 ㏁
Torque: 5 N⋅m ~
150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength:
5 kV, 100 mA
Temp. & Humidity:
-40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏
Pressure: Max. 3 ㎫ |
부속시설-1 |
| IEC 60079-15:2017 |
Explosive atmospheres –
Part 15: Equipment protection by type of protection "n" |
Input Voltage:
Max. 500 V
Input Frequency:
(50/60) Hz
Input Current:
Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance:
100 000 ㏁
Torque: 5 N⋅m ~
150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength:
5 kV, 100 mA
Temp. & Humidity:
-40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏
Pressure: Max. 3 ㎫ |
부속시설-1 |
| EN IEC 60079-0:2018 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
26.4.5 Degree of protection (IP) by enclosures
26.8 Thermal endurance to heat
26.9 Thermal endurance to cold
[Exception]
26.10 Resistance to UV light |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Temp. & Humidity: -40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
소재지 |
| IEC 60079-18:2014 |
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “"m”" |
Distance: 1 000 ㎜
Temperature: 500 ℃
Electric Strength: 5 kV, 100 mA |
부속시설-1 |
| IEC 60079-2:2014 |
Explosive atmospheres -
Part 2: Equipment protection by pressurized enclosure "p"
[Exception]
16.4 Purging test for pressurized enclosures with no internal source of release and filling procedure test for static pressurization
16.5 Purging and dilution tests for a pressurized enclosure with an internal source of release
16.7 Tests for an infallible containment system |
Pressure: Max. 3 ㎫
Flow Rate: 1 000 L/min
Time: 1/100 s |
부속시설-1 |
| IEC 60079-25:2020 |
Explosive atmospheres -
Part 25: Intrinsically safe electrical systems |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| IEC 60079-0:2011 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
26.4.5 Degree of protection (IP) by enclosures
26.8 Thermal endurance to heat
26.9 Thermal endurance to cold
[Exception]
26.10 Resistance to light |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Temp. & Humidity: -40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
소재지 |
| EN 60079-11:2012 |
Explosive atmospheres -
Part 11: Equipment protection by intrinsic safety "i" |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN IEC 60079-11:2024 |
Explosive atmospheres -
Part 11: Equipment protection by intrinsic safety "i" |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN IEC 60079-25:2022 |
Explosive atmospheres -
Part 25: Intrinsically safe electrical systems |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN ISO 80079-36:2016 |
Explosive atmospheres –
Part 36: Non-electrical equipment for explosive atmospheres –Basic method and requirements |
Temperature: 500 ℃
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Time: 1/100 s |
부속시설-1 |
| EN IEC 60079-26:2024 |
Explosive atmospheres –
Part 26: Equipment with Equipment Protection Level (EPL) Ga |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| EN IEC 60079-31:2024 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
[Exception]
6.1.1.4 IP test |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| EN IEC 60079-31:2024 |
Explosive atmospheres–
Part 31: Equipment dust
ignition protection by
enclosure "t"
6.1.1.4 IP test |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Weight: 150 ㎏ |
소재지 |
| EN ISO 80079-37:2016 |
Explosive atmospheres –
Part 37: Non-electrical equipment for explosive atmospheres –Non electrical type of protection constructional safety “c”, control of ignition source “b”, liquid immersion “k” |
Pressure: Max. 3 ㎫
Time: 1/100 s |
부속시설-1 |
| IEC 60079-26:2021 |
Explosive atmospheres –
Part 26: Equipment with Equipment Protection Level (EPL) Ga |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
부속시설-1 |
| IEC 60079-18:2014+AMD1:2017 |
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “"m”" |
Distance: 1 000 ㎜
Temperature: 500 ℃
Electric Strength: 5 kV, 100 mA |
부속시설-1 |
| IEC 60079-18:2025 |
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “"m”" |
Distance: 1 000 ㎜
Temperature: 500 ℃
Electric Strength: 5 kV, 100 mA |
부속시설-1 |
| IEC 60079-28:2025 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
Optical power 1 mW to 500 mW
Cl.5.1 Optical detector
Cl.5.2 Optical power
Cl.5.3 Optical irradiance |
소재지 |
| IEC 60079-5:2015+AMD1:2022 |
Explosive atmospheres -
Part 5: Equipment protection by powder filling "q" |
Distance: 1 000 ㎜
Electric Strength: 5 kV
Pressure: Max. 3 ㎫
Temperature: 500 ℃
Time: 1/100 s
Current: 500 A |
부속시설-1 |
| IEC 60079-6:2015+AMD1:2020 |
Explosive atmospheres –
Part 6: Equipment protection by liquid immersion "o" |
Pressure: Max. 3 ㎫
Time: 1/100 s |
부속시설-1 |
| IEC 60079-7:2015+AMD1:2017 |
Explosive atmospheres –
Part 7: Equipment protection by increased safety ''e''
[Exception]
6.2.3 Additional tests for machines
6.3 Luminaires
6.6.3 Mechanical shock test
6.6.4 Test for ventilation of Level of Protection "eb" battery container
6.7.3 Mechanical shock test
6.7.4 Test for ventilation of Level of Protection "ec" battery container
Annex G (normative) Test procedure for T5(only 8 W),T8, T10 and T12 lamps |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN IEC 60079-0:2018+A11:2024 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
26.4.5 Degree of protection (IP) by enclosures
26.8 Thermal endurance to heat
26.9 Thermal endurance to cold
[Exception]
26.10 Resistance to UV light |
Temperature: 500 ℃
Time: 1/100 s
Distance: 1 000 ㎜
Temp. & Humidity: -40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏ |
소재지 |
| EN IEC 60079-0:2018+A11:2024 |
Explosive atmospheres -
Part 0: Equipment -
General requirements
[Exception]
26.4.5 Degree of protection (IP) by enclosures
26.10 Resistance to UV light |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Resistance: 100 ㏀
Capacitance: 1 ㎌
Torque: 5 N⋅m ~ 150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength: 5 kV, 100 mA
Temp. & Humidity: -40 ℃ ~ 150 ℃/0 % ~ 95 %
Weight: 150 ㎏ |
부속시설-1 |
| EN IEC 60079-1:2014+A11:2024 |
Explosive atmospheres –
Part 1: Equipment protection by flameproof enclosure “d” |
Input Voltage:
Max. 500 V
Input Frequency:
(50/60) Hz
Input Current:
Max. 20 A
Temperature: 500 ℃
Torque: 5 N⋅m ~
150 N⋅m
Time: 1/100 s
Weight: 150 ㎏
Pressure: Max. 8 ㎫ |
부속시설-1 |
| EN 60079-5:2015/A1:2024 |
Explosive atmospheres -
Part 5: Equipment protection by powder filling "q" |
Distance: 1 000 ㎜
Electric Strength: 5 kV
Pressure: Max. 3 ㎫
Temperature: 500 ℃
Time: 1/100 s
Current: 500 A |
부속시설-1 |
| EN 60079-6:2015/A1:2024 |
Explosive atmospheres –
Part 6: Equipment protection by liquid immersion "o" |
Pressure: Max. 3 ㎫
Time: 1/100 s |
부속시설-1 |
| EN 60079-7:2015/A1:2018 |
Explosive atmospheres –
Part 7: Equipment protection by increased safety ''e''
[Exception]
6.2.3 Additional tests for machines
6.3 Luminaires
6.6.3 Mechanical shock test
6.6.4 Test for ventilation of Level of Protection "eb" battery container
6.7.3 Mechanical shock test
6.7.4 Test for ventilation of Level of Protection "ec" battery container
Annex G (normative) Test procedure for T5(only 8 W),T8, T10 and T12 lamps |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN 60079-7:2015/A11:2024 |
Explosive atmospheres –
Part 7: Equipment protection by increased safety ''e''
[Exception]
6.2.3 Additional tests for machines
6.3 Luminaires
6.6.3 Mechanical shock test
6.6.4 Test for ventilation of Level of Protection "eb" battery container
6.7.3 Mechanical shock test
6.7.4 Test for ventilation of Level of Protection "ec" battery container
Annex G (normative) Test procedure for T5(only 8 W),T8, T10 and T12 lamps |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Input Current: Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance: 100 000 ㏁
Electric Strength: 5 kV, 100 mA
Force: 1 000 N |
부속시설-1 |
| EN IEC 60079-15:2019/A11:2026 |
Explosive atmospheres –
Part 15: Equipment protection by type of protection "n" |
Input Voltage:
Max. 500 V
Input Frequency:
(50/60) Hz
Input Current:
Max. 20 A
Current: 1 000 A
Distance: 1 000 ㎜
Temperature: 500 ℃
Insulation Resistance:
100 000 ㏁
Torque: 5 N⋅m ~
150 N⋅m
Time: 1/100 s
Force: 1 000 N
Electric Strength:
5 kV, 100 mA
Temp. & Humidity:
-40 ℃ ~ 150 ℃
/0 % ~ 95 % R.H.
Weight: 150 ㎏
Pressure: Max. 3 ㎫ |
부속시설-1 |
| EN 60079-18:2015/A1:2017 |
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “"m”" |
Distance: 1 000 ㎜
Temperature: 500 ℃
Electric Strength: 5 kV, 100 mA |
부속시설-1 |
| EN IEC 60079-18:2025 |
Explosive atmospheres –
Part 18: Equipment protection by encapsulation “"m”" |
Distance: 1 000 ㎜
Temperature: 500 ℃
Electric Strength: 5 kV, 100 mA |
부속시설-1 |
| EN 60079-28:2015/A11:2024 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
Optical power 1 mW to 500 mW
C1. 5.2.2.2 Optical power
C1. 5.2.2.3 Optical irradiance |
소재지 |
| EN IEC 60079-28:2026 |
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation |
Optical power 1 mW to 500 mW
Cl.5.1 Optical detector
Cl.5.2 Optical power
Cl.5.3 Optical irradiance |
소재지 |
| ▶ 가정용 전기기기 |
| EN 62233:2008 |
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
EMF: 1 Hz ~ 400 kHz |
소재지 |
| EN IEC 62368-1:2020+A11:2020 |
Audio/video, information and communication technology equipment -
Part 1: Safety requirements
[Exception]
5.4.1.10 Vicat test B 50 of ISO 306
5.4.4 Mandrel
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
10 Radiations (Laser (IEC 60525-2, IEC 60825-12), X-ray, Effect of UV radiation on materials (Annex C), Acoustics)
Annex C UV radiation
Annex G.5.3.4 Test for FIW
Annex G.7 Mains supply cords
Annex G.15 Hydrostatic pressure
Annex G.15 Tubing and fittings compatibility test
Annex G.15 Tubing and fittings compatibility test
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Concentration of hydrogen gas
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex R Limited short-circuit test
Annex S Distillate fuel oil as described in Annex S.3.2
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Y.3 Resistance to corrosion, water borne contaminants
Y.3.3 Water- sulphur dioxide test
Y.4.3 Tensile strength and elongation tests
Y.4.4 Compression test
Y.4.5 Oil resistance |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| KC 62368-1:2021 |
오디오/비디오 및 정보통신기술기기 -
제1부: 안전 요구 사항
[제외항목]
5.4.1.10 KS M ISO 306의 B50 연화온도(Vicat) 시험
5.4.4 맨드릴(Mandrel) 시험
5.6.4.1 과전류 보호장치 의 결정과 그 회로 (부속서 R)
10 방사 (레이저 (IEC 60525-2, IEC 60825-12), X-ray, 재질에 대한 UV 방사선의 영향 (부속서 C), 음압)
부속서 C 자외선 (UV Radiation)
부속서 G.5.3.4 FIW 시험
부속서 G.7 주전원 코드
부속서 G.15 수압 시험
부속서 G.15 튜빙 및 피팅 호환성 시험
부속서 J 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7 수소 가스 농도
부속서 M.8.2 외부 스파크 원으로부터 내부 점화에 대한 보호 – 스파크 시험
부속서 R 제한 단락 회로 시험
부속서 S S.3.2의 디젤 연료 오일 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y.3 부식에 대한 내성, 수인성 오염 물질
부속서 Y.3.3 수포화 이산화황 시험
부속서 Y.4.3 인장 강도 및 연신율 시험
부속서 Y.4.4 압축 시험
부속서 Y.4.5 내유성 |
입력 전압: 500 V 이하
입력 주파수: (50 / 60) Hz
누설 전류: 10 mA 이하
온도: 200 ℃ 이하
접지 연속성: 6 V, 60 A
내전압: 10 kV
절연저항: 5 000 MΩ 이하
습도: 95 % R.H. 이하 |
소재지 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
5.4.1.10 Vicat test B 50 of ISO 306
5.4.4 Mandrel
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
10 Radiations (Laser (IEC 60525-2, IEC 60825-12), X-ray, Effect of UV radiation on materials (Annex C), Acoustics)
Annex C UV radiation
Annex G.5.3.4 Test for FIW
Annex G.7 Mains supply cords
Annex G.15 Hydrostatic pressure
Annex G.15 Tubing and fittings compatibility test
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Concentration of hydrogen gas
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex R Limited short-circuit test
Annex S Distillate fuel oil as described in Annex S.3.2
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Y.3 Resistance to corrosion, water borne contaminants
Y.3.3 Water- sulphur dioxide test
Y.4.3 Tensile strength and elongation tests
Y.4.4 Compression test
Y.4.5 Oil resistance |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| IEC 62368-1:2023 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
4.1.8 Liquids, refrigerants and liquid filled components (LFCs) (For equipment using refrigerants, IEC 60335-2-40 and IEC 61010-2-011)
5.4.1.10 Vicat test B 50 of ISO 306
5.4.4 Mandrel
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.2 Investigation of the effects of the chemical on the material of the container
10 Radiations (Laser (IEC 60825-1, IEC 60825-2, IEC 60825-12), X-ray, Effect of UV radiation on materials (Annex C), Acoustics)
Annex C UV radiation
Annex G.5.3.4 Test for FIW
Annex G.7 Mains supply cords
Annex G.15 Hydrostatic pressure
Annex G.15 Tubing and fittings compatibility test
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Concentration of hydrogen gas
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex R Limited short-circuit test
Annex S Distillate fuel oil as described in Annex S.3.2
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Y.3 Resistance to corrosion, water borne contaminants
Y.3.3 Water- sulphur dioxide test
Y.4.3 Tensile strength and elongation tests
Y.4.4 Compression test
Y.4.5 Oil resistance |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| IEC 62233:2005 |
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
EMF: 1 Hz ~ 400 kHz |
소재지 |
| KS C IEC 60335-1:2016 |
가정용 및 이와 유사한 전기기기의 안전성 -
제1부: 일반 요구사항
[제외항목]
14 임펄스 시험 전압 (6 000 V 이상)
22.16 자동식 코드 릴 시험
22.32 천연고무의 내열화성 시험
22.48 역류방지 시험 (KS C IEC 61770)
24.1.4 자동 제어장치의 동작 사이클 시험 (KS C IEC 60730-1)
부속서 F 커패시터
부속서 H 스위치
부속서 J 피복된 인쇄 회로기판
부속서 R 소프트웨어 평가 |
입력 전압: 500 V 이하
입력 주파수: (50 / 60) Hz
누설 전류: 10 mA 이하
온도: 200 ℃ 이하
접지 연속성: 6 V, 60 A
내전압: 10 kV
절연저항: 5 000 MΩ 이하
습도: 95 % R.H. 이하 |
소재지 |
| IEC 60335-2-23:2016+A1:2019 |
Household and similar electrical appliances - Safety -
Part 2-23: Particular requirements for appliances for skin or hair care |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| IEC 62368-1:2014 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]5.4.1.11 Vicat test B 50 of ISO 306
5.4.4 Mandrel
5.6.6.4 Determination of the overcurrent protective device and circuit (Annex R)
10 Radiations
Annex G.9 Mains supply cords
Annex G.21 Tubing and fittings compatibility testAnnex J Insulated winding wires for use without interleaved insulation
Annex M.8 Protection against internal ignition from external spark sources – Spark Test
Annex S Distillate fuel oil as described in Annex S.3.2
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| EN IEC 62368-1:2024+A11:2024 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
5.4.1.10 Vicat test B 50 of ISO 306
5.4.4 Mandrel
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
10 Radiations (Laser (IEC 60525-2, IEC 60825-12), X-ray, Effect of UV radiation on materials (Annex C), Acoustics)
Annex C UV radiation
Annex G.5.3.4 Test for FIW
Annex G.7 Mains supply cords
Annex G.15 Hydrostatic pressure
Annex G.15 Tubing and fittings compatibility test
Annex G.15 Tubing and fittings compatibility test
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Concentration of hydrogen gas
Annex M.8.2 Protection against internal ignition from external spark sources – Spark Test
Annex R Limited short-circuit test
Annex S Distillate fuel oil as described in Annex S.3.2
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Y.3 Resistance to corrosion, water borne contaminants
Y.3.3 Water- sulphur dioxide test
Y.4.3 Tensile strength and elongation tests
Y.4.4 Compression test
Y.4.5 Oil resistance |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| KS C IEC 60335-2-23:2019 |
가정용 및 이와 유사한 전기기기의 안전성 -
제2-23부: 피부 손질 또는 모발 손질용 전기기기의 개별 요구사항 |
입력 전압: 500 V 이하
입력 주파수: (50 / 60) Hz
누설 전류: 10 mA 이하
온도: 200 ℃ 이하
접지 연속성: 6 V, 60 A
내전압: 10 kV
절연저항: 5 000 MΩ 이하
습도: 95 % R.H. 이하 |
소재지 |
| IEC 60335-1:2020 |
Household and similar electrical appliances - Safety -
Part 1: General requirements
[Exception]
14 Impulse test voltage over 6 000 V
22.16 Test for automatic cord reels
22.32 Oxygen bomb aging test for natural or synthetic rubber
22.48 Test of IEC 61770
24.1.4 Operation cycle test for automatic controls of IEC 60730-1
Annex F. Capacitors
Annex H. Switches
Annex J. Coated printed circuit boards
Annex R. Software evaluation
Annex T. UV-C radiayion effect on non-metallic materials |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| IEC 60335-1:2010+A1:2013+A2:2016 |
Household and similar electrical appliances - Safety -
Part 1: General requirements
[Exception]
14 Impulse test voltage over 6 000 V
22.16 Test for automatic cord reels
22.32 Oxygen bomb aging test for natural or synthetic rubber
22.48 Test of IEC 61770
24.1.4 Operation cycle test for automatic controls of IEC 60730-1
Annex F. Capacitors
Annex H. Switches
Annex J. Coated printed circuit boards
Annex R. Software evaluation
Annex T. UV-C radiayion effect on non-metallic materials |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| EN IEC 60335-2-23:2023+A1:2023+A11:2023 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| EN IEC 60335-1:2023+A11:2023 |
Household and similar electrical appliances - Safety -
Part 1: General requirements
[Exception]
14 Impulse test voltage over 6 000 V
22.16 Test for automatic cord reels
22.32 Oxygen bomb aging test for natural or synthetic rubber
22.48 Test of IEC 61770
24.1.4 Operation cycle test for automatic controls of IEC 60730-1
Annex F. Capacitors
Annex H. Switches
Annex J. Coated printed circuit boards
Annex R. Software evaluation |
Input Voltage: Max. 500 V
Input Frequency: (50/60) Hz
Leakage Current: Max. 10 mA
Temperature: Max. 200 ℃
Earth Continuity: 6 V, 60 A
Electric Strength: 10 kV
Insulation Resistance: Max. 5 000 MΩ
Humidity: Max. 95 % R.H. |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 328 V2.1.1 |
Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
[Exception]
Radiation Measurement |
Frequency bands : 2 400 MHz to 2 483.5 MHz |
소재지 |
| ETSI EN 300 328 V2.2.2 |
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum
[Exception]
RadiationMeasurement |
Frequency bands : 2 400 MHz to 2 483.5 MHz |
소재지 |
| ETSI EN 301 893 V2.1.1 |
5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
[Exception]
Radiation Measurement |
Frequency bands : 5 150 MHz to 5 350 MHz / 5 470 MHz to 5 725 MHz |
소재지 |
| ETSI EN 300 330 V2.1.1 |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU
[Exception]
Radiation Measurement |
Frequency bands : 9 kHz to 30 MHz |
소재지 |
| ETSI EN 300 220-1 V3.1.1 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement
[Exception]
Radiation Measurement |
Frequency range : 25 MHz to 1 GHz |
소재지 |
| ETSI EN 300 220-2 V3.2.1 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment
[Exception]
Radiation Measurement |
Frequency range : 25 MHz to 1 GHz |
소재지 |
| ETSI EN 300 440 V2.2.1 |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard for access to radio spectrum
[Exception]
Radiation Measurement |
Frequency range : 1 GHz to 20 GHz |
소재지 |
| BS EN 62311:2008 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
Frequency bands : 0 Hz - 40 GHz |
소재지 |
| BS EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
Frequency bands : 10 MHz - 40 GHz |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-65:2012+A1:2017+A2:2021 |
Medical electrical equipment -
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 20 mA
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-65:2013+A1:2020+A2:2021 |
Medical electrical equipment -
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 20 mA
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-2-2:2017+A1:2023 |
Medical electrical equipment -
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A |
소재지 |
| EN 60601-1-3:2008+A1:2013 |
Medical electrical equipment -
Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| EN 62471:2008 |
Photobiological safety of lamps and lamp systems |
Input Voltage:
Max. 600 V
Input Current:
Max. 20 A
Spectra lirradiance: (250 - 2 500) nm
Spectra lradiance : (300 - 1 400) nm |
소재지 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipmen |
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-27:2014 |
Medical electrical equipment -
Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV |
소재지 |
| IEC 60601-2-27:2011 |
Medical electrical equipment -
Part 2-27 : Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV |
소재지 |
| EN 60601-2-54:2009+A1:2015+A2:2019 |
Medical electrical equipment -
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Phantom thickness: Max. 20 cm
Attenuation aluminium thickness: Max. 45 mm |
소재지 |
| EN IEC 60601-2-54:2024 |
Medical electrical equipment -
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Phantom thickness: Max. 20 cm
Attenuation aluminium thickness: Max. 45 mm |
소재지 |
| IEC 80601-2-59:2017 |
Medical electrical equipment -
Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 80601-2-59:2017+A1:2023 |
Medical electrical equipment -
Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1-10:2007+A1:2013 |
Medical electrical equipment -
Part 1-10 : General requirements for basic safety and essential performance-Collateral Standard : Requirements for the development of physiologic closed-loop controllers |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1-10:2007+A1:2013+A2:2020 |
Medical electrical equipment -
Part 1-10 : General requirements for basic safety and essential performance-Collateral Standard : Requirements for the development of physiologic closed-loop controllers |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-1-9:2008+A1:2013 |
Medical electrical equipment -
Part 1-9: General requirements for basic safety and essential performance - Collateral Standard : Requirements for environmentally conscious design |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-1-9:2008+A1:2013+A2:2020 |
Medical electrical equipment -
Part 1-9: General requirements for basic safety and essential performance - Collateral Standard : Requirements for environmentally conscious design |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1-9:2007+A1:2013 |
Medical electrical equipment -
Part 1-9: General requirements for basic safety and essential performance-Collateral Standard : Requirements for environmentally conscious design |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1-9:2007+A1:2013+A2:2020 |
Medical electrical equipment -
Part 1-9: General requirements for basic safety and essential performance-Collateral Standard : Requirements for environmentally conscious design |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-63:2015+A1:2019 |
Medical electrical equipment -
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 20 mA
Attenuation equivalent: Max. 1.2 mm Al |
소재지 |
| EN 60601-2-63:2015+A1:2019+A2:2021 |
Medical electrical equipment -
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 20 mA
Attenuation equivalent: Max. 1.2 mm Al |
소재지 |
| K 62471-1:2009 |
램프와 램프장치의 광생물학적 안전성 |
입력전압: 600 V
입력전류: 20 A
복사조도: (250 ~ 2 500) nm
복사휘도: (300 ~ 1 400) nm |
소재지 |
| IEC 62471:2006 |
Photobiological safety of lamps and lamp systems |
Input Voltage:
Max. 600 V
Input Current:
Max. 20 A
Spectral irradiance: (250 - 2 500)nm
Spectral radiance : (300 - 1 400)nm |
소재지 |
| EN IEC 80601-2-59:2019+A1:2023 |
Medical electrical equipment –
Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
Temperature: Max. 200 ℃ |
소재지 |
| EN IEC 80601-2-59:2019 |
Medical electrical equipment –
Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1-11:2015+A1:2020 |
Medical electrical equipment -
Part 1-11 : General requirements for basic safety and essential performance - Collateral Standard : Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| EN 60601-1-10:2008+A1:2015 |
Medical electrical equipment -
Part 1-10: General requirements for basic safety and essential performance - Collateral Standard : Requirements for the development of physiologic closed-loop controllers |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-1-10:2008+A1:2015+A2:2021 |
Medical electrical equipment -
Part 1-10: General requirements for basic safety and essential performance - Collateral Standard : Requirements for the development of physiologic closed-loop controllers |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-2-2:2017 |
Medical electrical equipment -
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A |
소재지 |
| IEC 60601-1-6:2010+A1:2013 |
Medical electrical equipment -
Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1-6:2010+A1:2013+A2:2020 |
Medical electrical equipment -
Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-6:2015+A1:2016 |
Medical electrical equipment -
Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Unwanted radiation: 10 W/cm² |
소재지 |
| EN 60601-2-6:2015+A1:2016+A2:2024 |
Medical electrical equipment -
Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Unwanted radiation: 10 W/cm² |
소재지 |
| IEC 60601-2-6:2012+A1:2016 |
Medical electrical equipment -
Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Unwanted radiation: 10 W/cm² |
소재지 |
| IEC 60601-2-6:2012+A1:2016+A2:2022 |
Medical electrical equipment -
Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Unwanted radiation: 10 W/cm² |
소재지 |
| EN 60601-2-4:2011+A1:2019 |
Medical electrical equipment - Part 2-4:
Particular requirements for the basic safety and essential performance of cardiac defibrillator
[Exception]
201.109Externalpacing (U.S.) |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Resistive load: (25 ~ 175) Ω |
소재지 |
| IEC 60601-2-4:2010+A1:2018 |
Medical electrical equipment -
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.109 External pacing |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Resistive load: (25 ~175) Ω |
소재지 |
| EN 60601-2-3:2015+A1:2016 |
Medical electrical equipment -
Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output power: Max. 500 W |
소재지 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment -
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output current: 100 mA |
소재지 |
| IEC 60601-2-10:2012+A1:2016+A2:2023 |
Medical electrical equipment -
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output current: 100 mA |
소재지 |
| IEC 60601-2-54:2009+A1:2015+A2:2018 |
Medical electrical equipment -
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Phantom thickness: Max. 20 cm
Attenuation aluminium thickness: Max. 45 mm |
소재지 |
| EN 60601-2-47:2015 |
Medical electrical equipment -
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA |
소재지 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA |
소재지 |
| IEC 80601-2-49:2018+A1:2024 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA |
소재지 |
| EN 60601-1-12:2015+A1:2020 |
Medical electrical equipment -
Part 1-12: General requirements for basic safety and essential performance - Collateral Standard : Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| EN 60601-1-12:2015 |
Medical electrical equipment -
Part 1-12: General requirements for basic safety and essential performance - Collateral Standard : Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| IEC 60601-1-12:2014+A1:2020 |
Medical electrical equipment -
Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| IEC 60601-1-3:2008+A1:2013 |
Medical electrical equipment -
Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| IEC 60601-1-3:2008+A1:2013+A1:2021 |
Medical electrical equipment -
Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| EN 60601-1:2006+A1:2013 |
Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Parts of natural latex rubber are aged in an atmosphere of oxygen under pressure. The samples are suspended freely in an oxygen cylinder, the effective capacity of the cylinder is at least 10 times the volume of the sample. The cylinder is filled with commercial oxygen not less than 97 % pure, to a press of 2.1 MPa ± 70 kPa.
9.5.2 Cathode ray tubes
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME STSTEMS
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-1:2006+A1:2013+A2:2021 |
Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Parts of natural latex rubber are aged in an atmosphere of oxygen under pressure. The samples are suspended freely in an oxygen cylinder, the effective capacity of the cylinder is at least 10 times the volume of the sample. The cylinder is filled with commercial oxygen not less than 97 % pure, to a press of 2.1 MPa ± 70 kPa.
9.5.2 Cathode ray tubes
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME STSTEMS
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1:2005+A1:2012 |
Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Parts of natural latex rubber are aged in an atmosphere of oxygen under pressure. The samples are suspended freely in an oxygen cylinder, the effective capacity of the cylinder is at least 10 times the volume of the sample. The cylinder is filled with commercial oxygen not less than 97 % pure, to a press of 2.1 MPa ± 70 kPa.
9.5.2 Cathode ray tubes
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-1:2005+A1:2012+A2:2020 |
Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Parts of natural latex rubber are aged in an atmosphere of oxygen under pressure. The samples are suspended freely in an oxygen cylinder, the effective capacity of the cylinder is at least 10 times the volume of the sample. The cylinder is filled with commercial oxygen not less than 97 % pure, to a press of 2.1 MPa ± 70 kPa.
9.5.2 Cathode ray tubes
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-1-11:2010+A1:2015 |
Medical electrical equipment -
Part 1-11: General requirements for basic safety and essential performance - Collateral Standard : Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| EN 60601-1-11:2010+A1:2015+A1:2021 |
Medical electrical equipment -
Part 1-11: General requirements for basic safety and essential performance - Collateral Standard : Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| EN 60601-2-10:2015+A1:2016 |
Medical electrical equipment -
part 2-10: Particular requirements for the safety of nerve and muscle stimulators |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output current: 100 mA |
소재지 |
| EN 60601-2-10:2015+A1:2016+A2:2024 |
Medical electrical equipment -
part 2-10: Particular requirements for the safety of nerve and muscle stimulators |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output current: 100 mA |
소재지 |
| IEC 60601-1-11:2015 |
Medical electrical equipment -
Part 1-11 : General requirements for basic safety and essential performance - Collateral Standard : Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| EN 60601-2-3:2015+A1:2016+A2:2024 |
Medical electrical equipment -
Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output power: Max. 500 W |
소재지 |
| IEC 60601-1-8:2006+A1:2012 |
Medical electrical equipment -
Part 1-8: General requirements for basic safety and essential performance – Collateral standard : General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Noise Level: 94 dB |
소재지 |
| IEC 60601-1-8:2006+A1:2012+A2:2020 |
Medical electrical equipment -
Part 1-8: General requirements for basic safety and essential performance – Collateral standard : General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Noise Level: 94 dB |
소재지 |
| IEC 60601-1-12:2014 |
Medical electrical equipment -
Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment |
Peak acceleration: Max. 100 g
Acceleration amplitude: Max. 1.0 (m/s²)²/Hz
Fall height: Max. 1.8 m |
소재지 |
| IEC 60601-2-63:2012+A1:2017+A2:2021 |
Medical electrical equipment -
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 20 mA
Attenuation equivalent: Max. 1.2 mm Al |
소재지 |
| ISO 80601-2-61:2017 |
Medical electrical equipment -
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-2-3:2012+A1:2016 |
Medical electrical equipment -
Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output power: Max. 500 W |
소재지 |
| IEC 60601-2-3:2012+A1:2016+A2:2022 |
Medical electrical equipment -
Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Output power: Max. 500 W |
소재지 |
| IEC 60601-2-45:2011+A1:2015 |
Medical electrical equipment -
Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICES |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| IEC 60601-2-45:2011+A1:2015+A2:2022 |
Medical electrical equipment -
Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICES |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| EN 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment -
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-2-22:2019 |
Medical electrical equipment -
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
Measuring Distance: 1 500 mm
Measuring Laser Power: (1 ~ 300) W
Measuring Laser Energy: 2.4 mJ ~ 3.0 J
Measuring Laser Wavelength: (266 ~ 2 100) nm
Leakage current: Max. 10 mA |
소재지 |
| IEC 60601-2-18:2009 |
Medical electrical equipment -
Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Dielectric strength test: 10 kV
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-18:2015 |
Medical electrical equipment -
Part 2-18 : Particular requirements for the basic safety and essential performance of endoscopic equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Dielectric strength test: 10 kV
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment -
Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICES |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| EN 60601-1-8:2007+A1:2013+A2:2021 |
Medical electrical equipment -
Part 1-8: General requirements for basic safety and essential performance - Collateral Standard : General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Noise Level: 94 dB |
소재지 |
| EN 60601-1-8:2007+A1:2013 |
Medical electrical equipment -
Part 1-8: General requirements for basic safety and essential performance - Collateral Standard : General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Noise Level: 94 dB |
소재지 |
| EN 60601-2-25:2015 |
Medical electrical equipment -
Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA |
소재지 |
| IEC 60601-2-25:2011 |
Medical electrical equipment -
Part 2-25 : Particular requirements for the basic safety and essential performance of electrocardiographs |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA |
소재지 |
| EN 60601-2-22:2013 |
Medical electrical equipment -
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
Measuring Distance: 1 500 mm
Measuring Laser Power: (1 ~ 300) W
Measuring Laser Energy: 2.4 mJ ~ 3.0 J
Measuring Laser Wavelength: (266 ~ 2 100) nm
Leakage current: Max. 10 mA |
소재지 |
| EN IEC 60601-2-22:2020 |
Medical electrical equipment -
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
Measuring Distance: 1 500 mm
Measuring Laser Power: (1 ~ 300) W
Measuring Laser Energy: 2.4 mJ ~ 3.0 J
Measuring Laser Wavelength: (266 ~ 2 100) nm
Leakage current: Max. 10 mA |
소재지 |
| EN IEC 60601-2-2:2018+A1:2024 |
Medical electrical equipment -
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A |
소재지 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment -
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A |
소재지 |
| EN 60601-1-6:2010+A1:2015+A2:2021 |
Medical electrical equipment -
Part 1-6 : General requirements for basic safety and essential performance - Collateral Standard : Usability |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 80601-2-60:2015 |
Medical electrical equipment -
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN IEC 80601-2-60:2020 |
Medical electrical equipment -
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| IEC 60601-2-28:2017 |
Medical electrical equipment -
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Temperature: Max. 200 ℃ |
소재지 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment -
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Input voltage(AC):
Max. 500 V
Input Frequency:
(50/60) Hz
Leakage current:
Max. 10 mA
Dielectric strength
test: 10 kV
Temperature:
Max. 200 °C |
소재지 |
| IEC 80601-2-30:2018 |
Medical electrical equipment -
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
[Exception]
201.106 Clinical accuracy
202.8.101 Electrosurgery interference recovery |
Measuring Pressure: (10 ~ 400) mmHg |
소재지 |
| IEC 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment -
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-2-43:2010+A1:2018+A2:2020 |
Medical electrical equipment -
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 45 mm |
소재지 |
| EN IEC 60601-2-43:2023 |
Medical electrical equipment -
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 45 mm |
소재지 |
| IEC 60601-2-43:2010+A1:2017+A2:2019 |
Medical electrical equipment -
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 45 mm |
소재지 |
| IEC 60601-2-43:2022 |
Medical electrical equipment -
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 45 mm |
소재지 |
| IEC 60601-2-47:2012 |
Medical electrical equipment -
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA |
소재지 |
| EN 60601-2-45:2011+A1:2015+A2:2024 |
Medical electrical equipment -
Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICES |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| IEC 60601-2-54:2022 |
Medical electrical equipment -
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Phantom thickness: Max. 20 cm
Attenuation aluminium thickness: Max. 45 mm |
소재지 |
| EN IEC 80601-2-30:2019 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
[Exception]
201.106 Clinical accuracy
202.6.2.101 Electrosurgery interference recovery |
Measuring Pressure: (10 ~ 400) mmHg |
소재지 |
| EN 60601-1-6:2010+A1:2015 |
Medical electrical equipment -
Part 1-6 : General requirements for basic safety and essential performance - Collateral Standard : Usability |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Humidity: Max. 95 % R.H.
Earth continuity: 6 V, 60 A
Temperature: Max. 200 ℃ |
소재지 |
| EN 60601-1-3:2008+A1:2013+A1:2021 |
Medical electrical equipment -
Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Input voltage(AC): Max. 500 V
Input Frequency: (50/60) Hz
Leakage current: Max. 10 mA
Dielectric strength test: 10 kV
Half-value layer: Max. 5.4 mm Al |
소재지 |
| ▶ 전자기적합성 |
| EN 12895:2015+A1:2019 |
Industrial trucks - Electromagnetic compatibility |
RS : 27 MHz to 2 700 MHz
ESD : ±15 kV
MF : (30, 1 000) A/m |
소재지 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-6: Particular requirements. In vitro diagnostic (IVD) medical equipment |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±15 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| MIL-STD-461E:1999 |
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, power leads.
5.5 CE102, conducted emissions, power leads.
5.6 CE106, conducted emissions, antenna terminal,
5.7 CS101, conducted susceptibility, power leads.
5.11 CS109, conducted susceptibility, structure current.
5.12 CS114, conducted susceptibility, bulk cable injection.
5.13 CS115, Conducted susceptibility, bulk cable injection.
5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads.
5.15 RE101, Radiated emissions, magnetic field.
5.16 RE102, radiated emissions, electric field.
5.18 RS101, radiated susceptibility, magnetic field.
5.19 RS103, radiated susceptibility, electric field.
[Exception]
2 MHz to 150 MHz, 200 V/m |
CE101 : 30 ㎐ to 10 kHz
CE102 : 10 kHz to 10 MHz
CE106 : 10 kHz to 40 GHz
CS101 : 30 ㎐ to 150 kHz
CS109 : 60 ㎐ to 100 kHz
CS114 : 10 kHz to 200 MHz
CS115 : Impulse excitation, 5 A
CS116 : 10 kHz to 100 MHz
RE101 : 30 ㎐ to 100 kHz
RE102 : 10 kHz to 18 GHz
RS101 : 30 ㎐ to 100 kHz
RS103 : 2 MHz to 40 GHz |
소재지 |
| EN 55014-1:2017+A11:2020 |
Electromagnetic compatibility -
Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE : 30 MHz to 1 GHz
CE : 9 kHz to 30 MHz
Click : 150 kHz to 30 MHz
DP : 30 MHz to 300 MHz |
소재지 |
| EPRI TR-102323 Rev. 2 : 2000 |
Guidelines for Electromagnetic Interference Testing in Power Plants
5-8. Low-Frequency Conducted Susceptibility
5-10. High-Frequency Conducted Susceptibility
5-12. Low-frequency radiated susceptibility
5-14. High-frequency radiated susceptibility
5-15. Surge
5-16. Electrically-fast Transient/Burst
5-17. Electrostatic discharge
5-18. Low-frequency conducted emissions
5-20. High-frequency conducted emissions
5-22. Low-frequency radiated emissions
5-24. High-frequency radiated emissions |
CS101 : 30 Hz to 50 kHz
CS114 : 10 kHz to 200 MHz
RS101 : 30 Hz to 100 kHz
RS103 : 10 kHz to 10 GHz
EFT : ±2 kV
Burst : ±2 kV
ESD : Air ±15 kV, Contact ±8 kV
CE101 : 30 Hz to 10 kHz
CE102 : 10 kHz to 10 MHz
RE101 : 30 Hz to 100 kHz
RE102 : 10 kHz to 10 GHz |
소재지 |
| EPRI TR-102323 Rev. 1 : 1997 |
Guidelines for Electromagnetic Interference Testing in Power Plants
7-2. Equipment conducted emissions
7-3. Equipment conducted emissions
7-4. Equipment radiated magnetic field emissions
7-5. Equipment radiated electric field emissons
B-10. Continuous Wave, Radiated
B-11. Continuous Wave, Conducted
B-12. Surge Tests
B-14. Fast Transient and impulse Tests
B-14. Electrostatic discharge |
CE101 : 30 Hz to 50 kHz
CE102 : 50 kHz to 400 MHz
RE101 : 30 Hz to 100 kHz
RE102 : 10 kHz to 1 GHz
CS101 : 30 Hz to 50 kHz
CS114 : 50 kHz to 400 MHz
RS101 : 30 Hz to 100 kHz
RS103 : 10 kHz to 1 GHz
Surge : ±3 kV
Burst : ±3 kV
ESD : Air ±15 kV, Contact ±8 kV |
소재지 |
| EPRI TR-102323 Rev. 0 : 1994 |
Guidelines for Electromagnetic Interference Testing in Power Plants
7-2. Equipment conducted emissions
7-3. Equipment conducted emissions
7-4. Equipment radiated magnetic field emissions
7-5. Equipment radiated electric field emissons
B-9. Continuous Wave, Radiated
B-10. Continuous Wave, Conducted
B-12. Surge Tests
B-13. Fast Transient and impulse Tests
B-13. Electrostatic discharge |
CE101 : 30 Hz to 50 kHz
CE102 : 50 kHz to 400 MHz
RE101 : 30 Hz to 100 kHz
RE102 : 10 kHz to 1 GHz
CS101 : 30 Hz to 50 kHz
CS114 : 50 kHz to 400 MHz
RS101 : 30 Hz to 100 kHz
RS103 : 10 kHz to 1 GHz
Surge : ±3 kV
Burst : ±3 kV
ESD : Air ±15 kV, Contact ±8 kV |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
RE: 30 ㎒ to 6 ㎓
CE: 150 ㎑ to 30 ㎒ |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity for industrial environments |
ESD: ± 8 ㎸
RS: 80 ㎒ to 6.0 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
M/F: 30 A/m
V-DIP: (0 to 100) % |
소재지 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
≤ 16 A, 50 ㎐ / 60 ㎐ |
소재지 |
| EN IEC 61000-3-2:2019 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment
input current 16 A per phase) |
I ≤ 16 A |
소재지 |
| EN IEC 61000-3-2:2019+A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment
input current 16 A per phase) |
I ≤ 16 A |
소재지 |
| ISO 11452-8:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
[Exception]
7.5 Helmholtz coil method |
DC and 15 ㎐ to 150 kHz |
소재지 |
| ETSI EN 301 489-17 V3.3.1 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz,
RE : 9 kHz ~ 18 GHz,
ESD : ±8 kV,
RS : 80 MHz ∼ 6 GHz,
EFT : ±4 kV,
SURGE : ±4 kV,
CS : 150 kHz ∼ 230 MHz,
M/F : 30 A/m,
V-DIP : (0 ∼ 100) % |
소재지 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control
and laboratory use - EMC requirements
Part 2-5: Particular requirements - Test
configurations, operational conditions and
performance criteria for devices with field bus
interfaces according to IEC 61784-1 |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| ISO 11451-4:2013 |
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 4: Bulk current injection (BCI) |
Frequency band
: 1.0 MHz to 400 MHz,
Test level : 200 mA |
소재지 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| IEC 61326-2-4:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EPRI TR-102323 Rev. 3 : 2004 |
Guidelines for Electromagnetic Interference Testing in Power Plants
5-6. Low-Frequency Conducted Susceptibility
5-8. High-Frequency Conducted Susceptibility
5-10. Low-frequency radiated susceptibility
5-12. High-frequency radiated susceptibility
5-13. Surge
5-15. Electrically-fast Transient/Burst
5-17. Electrostatic discharge
5-19. Low-frequency conducted emissions
5-21. High-frequency conducted emissions
5-23. Low-frequency radiated emissions
5-25. High-frequency radiated emissions |
CS101 : 30 Hz to 150 kHz
CS114 : 10 kHz to 200 MHz
RS101 : 30 Hz to 100 kHz
RS103 : 10 kHz to 10 GHz
EFT : ±2 kV
CS116 : 10 kHz to 100 MHz
Burst : ±2 kV
CS115 : Impulse : 5 A
ESD : Air ±15 kV, Contact ±8 kV
CE101 : 30 Hz to 10 kHz
CE102 : 10 kHz to 10 MHz
RE101 : 30 Hz to 100 kHz
RE102 : 10 kHz to 10 GHz |
소재지 |
| ES-0000-0002:2014 |
한전표준규격 - 전자기적합성 시험 일반 |
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 3 A/m
V-DIP : (0 to 100) %
RE : 9 kHz to 18 GHz
CE : 9 kHz to 30 MHz |
소재지 |
| ETSI EN 301 489-1 V2.2.3 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 62040-2:2006 |
Uninterruptible power systems (UPS) -
Electromagnetic compatibility (EMC) requirements |
RE : 30 MHz to 1 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 1 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
V-DIP : Max. 100 %
M/F : 30 A/m |
소재지 |
| EN 62493:2015 |
Assessment of lighting equipment related to human exposure to electromagnetic fields |
20 kHz to 10 MHz |
소재지 |
| EN IEC 61000-3-11:2019 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
I ≤ 75 A |
소재지 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-6: Particular requirements. In vitro diagnostic (IVD) medical equipment |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) -
Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 3 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 61000-4-19:2014 |
Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
LFCS : (2 to 150) kHz |
소재지 |
| MIL-STD-461F:2007 |
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, power leads.
5.5 CE102, conducted emissions, power leads.
5.6 CE106, conducted emissions, antenna terminal,
5.7 CS101, conducted susceptibility, power leads.
5.11 CS106, conducted susceptibility, transients, power leads.
5.12 CS109, conducted susceptibility, structure current.
5.13 CS114, conducted susceptibility, bulk cable injection.
5.14 CS115, Conducted susceptibility, bulk cable injection.
5.15 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads.
5.16 RE101, Radiated emissions, magnetic field.
5.17 RE102, radiated emissions, electric field.
5.19 RS101, radiated susceptibility, magnetic field.
5.20 RS103, radiated susceptibility, electric field.
[Exception]
2 MHz to 150 MHz, 200 V/m |
CE101 : 30 ㎐ to 10 kHz
CE102 : 10 kHz to 10 MHz
CE106 : 10 kHz to 40 GHz
CS101 : 30 ㎐ to 150 kHz
CS106 : Transient Pulse
CS109 : 60 ㎐ to 100 kHz
CS114 : 4 kHz to 200 MHz
CS115 : Impulse excitation, 5 A
CS116 : 10 kHz to 100 MHz
RE101 : 30 ㎐ to 100 kHz
RE102 : 10 kHz to 18 GHz
RS101 : 30 ㎐ to 100 kHz
RS103 : 2 MHz to 40 GHz |
소재지 |
| CISPR 14-1:2016 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part1:Emission |
RE : 9 kHz to 18 GHz
CE : 148.5 kHz to 30 MHz
Click : 150 kHz to 30 MHz
DP : 30 MHz to 300 MHz |
소재지 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part1:Emission |
RE : 9 kHz to 18 GHz
CE : 9 kHz to 30 MHz
Click : 150 kHz to 30 MHz
DP : 30 MHz to 300 MHz |
소재지 |
| CISPR 14-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part2:Immunity |
ESD : ±8 kV
RS : 80 MHz to 1 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz to 230 MHz
V-DIP : (0 to 100) % |
소재지 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part2:Immunity |
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz to 230 MHz
V-DIP : (0 to 100) % |
소재지 |
| CISPR 16-1-4:2012 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
- |
소재지 |
| CISPR 16-1-4:2019+A1:2020 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
- |
소재지 |
| CISPR 16-2-1:2014 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
- |
소재지 |
| CISPR 16-2-3:2016 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
- |
소재지 |
| CISPR 16-2-3:2016+A1:2019 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
- |
소재지 |
| KS C IEC 60533:2013 |
선박용 전기 설비-전기자기 적합성 |
RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : Max. 100 %
LFCS : 50 ㎐ ~ 10 kHz |
소재지 |
| KS C IEC 60092-504:2007 |
선박용 전기설비-
제504부：특별사항-제어 및 사용 |
RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : Max. 100 % |
소재지 |
| SAE J1113/11:2012 |
Immunity To Conducted Transients On Power Leads |
12 V System: Pulse 1a, 1b, 2a, 2b, 3a, 3b, 4, 5a, 5b
24 V System: Pulse 1c, 2a, 2b, 3a, 3b, 4, 5a, 5b |
소재지 |
| S2-W-5:2024 |
안전인증대상기계등이 아닌 유해·위험기계등의 안전인증 규정 [고용노동부 고시 제2020-39호, 2020.01.15.] [별표 1] 임의안전인증 대상별 기술기준 [공통기술기준] |
RE: 9 ㎑ to 18 ㎓
CE: 9 ㎑ to 30 ㎒
ESD: ± 8 ㎸
RS: 80 ㎒ to 6 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
V-DIP: (0 to 100) % |
소재지 |
| EN 12016:2013 |
Electromagnetic compatibility -
Product family standard for lifts, escalators and moving walks - Immunity |
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz to 80 MHz
V-DIP : (0 to 100) % |
소재지 |
| 고용노동부고시 제2024-21호(2024.04.17) |
안전인증대상기계 등이 아닌 유해ㆍ위험기계등의 안전인증 규정 |
RE: 9 ㎑ to 18 ㎓
CE: 9 ㎑ to 30 ㎒
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
V-DIP: (0 to 100) % |
소재지 |
| 고용노동부고시 제2020-39호(2020.01.15) |
안전인증대상기계등이 아닌 유해ㆍ위험기계등의 안전인증 규정 |
RE: 9 ㎑ to 18 ㎓
CE: 9 ㎑ to 30 ㎒
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
V-DIP: (0 to 100) % |
소재지 |
| EN 61000-4-18:2007+A1:2010 |
Electromagnetic compatibility (EMC) -
Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
(250 to 2 500) V |
소재지 |
| EN 61000-4-16:2016 |
Electromagnetic compatibility (EMC) -
Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 ㎐ to 150 ㎑ |
0 ㎐ to 150 kHz |
소재지 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility -
Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity |
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 230 MHz
V-DIP : (0 to 100) % |
소재지 |
| EN 55014-2:2015 |
Electromagnetic compatibility -
Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity |
ESD : ±8 kV
RS : 80 MHz to 1 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 230 MHz
V-DIP : (0 to 100) % |
소재지 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE : 30 MHz to 300 MHz
CE : 9 kHz to 30 MHz
Loop : 9 kHz to 30 MHz |
소재지 |
| EN IEC 55015:2019+A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE : 30 MHz to 300 MHz
CE : 9 kHz to 30 MHz
Loop : 9 kHz to 30 MHz |
소재지 |
| EN 55015:2013+A1:2015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
RE : 30 MHz to 300 MHz
CE : 9 kHz to 30 MHz
Loop : 9 kHz to 30 MHz |
소재지 |
| EN 55025:2017 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
RE : 150 kHz to 2.5 GHz
CE(VOLTAGE METHOD) : 150 kHz to 108 MHz
CE(CURRENT METHOD) : 150 kHz to 108 MHz |
소재지 |
| EN 55032:2015+A11:2020 |
Electromagnetic compatibility of multimedia equipment -
Emission Requirements |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
Disturbance Voltage : 9 kHz to 2.15 GHz |
소재지 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 1: General requirements |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN 61000-6-7:2015 |
Electromagnetic compatibility (EMC) -
Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±4 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 100 A/m
V-DIP : (0 to 100) %
CSLF : 15 ㎐ to 150 kHz |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity for industrial environments |
ESD: ± 8 ㎸
RS: 80 ㎒ to 6.0 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
M/F: 30 A/m
V-DIP: (0 to 100) % |
소재지 |
| SAE J1113/12:2006 |
Electrical Interference By Conduction And Coupling~Capacitive And Inductive Coupling Via Lines Other Than Supply Lines |
CCC: Pulse A, B
DCC: Pulse C, D
ICC: Pulse C, D |
소재지 |
| SAE J1113/13:2015 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components -
Part 13: Immunity To Electrostatic Discharge |
(±4 to ±25) ㎸ |
소재지 |
| 고용노동부고시 제2020-37호(2020.01.15) |
위험기계∙기구 자율안전확인 고시 |
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
M/F: 30 A/m
V-DIP: (0 ∼ 100) % |
소재지 |
| IEC 61326-2-3:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| SEMI S2-1016b:2016 |
Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment / section 25 Non-Ionizing Radiation and Field |
0 ㎐ to 6 GHz |
소재지 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 — 무선 주파수 방해 특성 — 허용기준 및 측정방법 |
RE : 9 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) — 제6-4부: 일반 표준 — 산업 환경에서의 전자파 방출 표준 |
RE: 30 ㎒ to 6 ㎓
CE: 150 ㎑ to 30 ㎒ |
소재지 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) — 제6-3부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz |
소재지 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) — 제4-8부: 시험 및 측정기술 — 전원 주파수 자기장 내성 시험 |
M/F : 300 A/m |
소재지 |
| ISO 11452-9:2012 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 9: Portable transmitters |
(26 to 2 500) MHz |
소재지 |
| ISO 13766-1:2018 |
Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions
4.7.2 Stripline, TEM cell, TWC |
RE : 30 MHz to 1 GHz
RS : 30 MHz to 2 GHz
ESD : ±8 kV
Conducted Transients : -220 V |
소재지 |
| SAE J1113/23:2002 |
Electromagnetic Compatibility
Measurement Procedure For Vehicle
Components - Immunity To Radiated
Electromagnetic Fields, 10 ㎑ To 200 ㎒,
Strip Line Method |
10 kHz to 200 MHz,
Strip Line Method |
소재지 |
| IEC 61000-4-13:2015 |
Electromagnetic compatibility (EMC) -
Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
16 ㎐ to 1 MHz |
소재지 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) —제4-6부: 시험및측정기술—전도성 RF 전자기장내성시험 |
CS : 150 kHz ~ 230 MHz |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) — 제4-5부: 시험 및 측정기술 — 서지 내성 시험 |
SURGE : ±6 Kv |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) — 제4-4부: 시험 및 측정기술 — 전기적 빠른 과도현상, 버스트 내성 시험 |
EFT : ±4 ㎸ |
소재지 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) —
제4-3부: 시험 및 측정기술 —
방사성 RF 전자기장 내성 시험 |
RS : 80 MHz ~ 6 GHz, 30 V/m |
소재지 |
| NRC REGULATORY GUIDE 1.180 : 2003 |
Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems
3.1 CE101-Conducted emissions, low frequency
3.2 CE102-Conducted emissions, high frequency
3.3 RE101-Radiated emissions, magnetic field
3.4 RE102-Radiated emissions, electric field
3.5 IEC Emissions tests
4.1.1 CS101-Conducted susceptibility, low frequency
4.1.2 CS114-Conducted susceptibility, high frequency
4.1.3 IEC Conducted susceptibility tests- power leads
4.2 EMI/RFI Conducted susceptibility testing-signal leads
4.3.1 RS101-Radiated susceptibility, magnetic fields
4.3.2 RS103-Radiated susceptibility, electric fields
4.3.3 IEC Radiated susceptibility tests
5.1 IEEE C62.41 Ring wave and IEC 61000-4-12
5.2 IEEE C62.41 Combination wave and IEC 61000-4-5
5.3 IEEE C62.41 Electrically fast transients and IEC 61000-4-4 |
CE101 : 30 Hz to 10 kHz
CE102 : 10 kHz to 2 MHz
RE101 : 30 Hz to 100 kHz
RE102 : 10 kHz to 10 GHz
CS101 : 30 kHz to 150 kHz
CS114 : 10 kHz to 30 MHz
CS115 : Impulse : 2 A
CS116 : 10 kHz to 100 MHz
RS101 : 30 Hz to 10 kHz
RS103 : 30 MHz to 10 GHz
Surge : Ring wave ±4 kV, Combination ±4 kV
Burst : ±3 kV |
소재지 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| KS C 9816-1-4:2017 |
전자파 방해 및 내성 측정장비와 측정방법 — 제1-4부: 전자파 방해 및 내성 측정장비 — 방사성 방해 측정용 안테나 및 시험장 |
- |
소재지 |
| KS C 9816-2-1:2023 |
전자파 방해 및 내성 측정장비와 측정방법 — 제2-1부: 전자파 방해 및 내성 측정방법 — 전도성 방해 측정 |
- |
소재지 |
| KS C 9814-1:2022 |
전자파적합성(EMC) — 가정용 전기기기, 전동공구 및 유사기기의 요구사항 — 제1부: 방출 |
RE : 9 kHz ~ 18 GHz
CE : 148.5 kHz ~ 30 MHz
Click : 150 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz |
소재지 |
| KS C 9814-2:2022 |
전자파적합성(EMC) — 가정용 전기기기, 전동공구 및 유사기기의 요구사항 — 제2부: 내성 |
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 230 MHz
V-DIP : (0 ~ 100) % |
소재지 |
| KS C 9815:2017 |
조명기기 및 유사기기의 무선 방해 특성의 허용기준 및 측정 방법 |
RE : 30 MHz ~ 300 MHz
CE : 9 kHz ~ 30 MHz
Loop : 9 kHz ~ 30 MHz |
소재지 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility -
Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE : 30 MHz to 18 GHz
CE : 9 kHz to 30 MHz
Click : 150 kHz to 30 MHz
DP : 30 MHz to 300 MHz |
소재지 |
| SAE J1113/21:2013 |
Electromagnetic Compatibility Measurement Procedure For Vehicle Components -
Part 21: Immunity To Electromagnetic Fields, 30 ㎒ To 18 ㎓, Absorber-Lined Chamber |
80 MHz to 3.2 GHz |
소재지 |
| SAE J1113/22:2010 |
Electromagnetic Compatibility Measurement Procedure For Vehicle Components -
Part 22: Immunity To Radiated Magnetic Fields |
15 ㎐ to 30 kHz |
소재지 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) — 제6-1부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : (0 ~ 100) % |
소재지 |
| KS X IEC 60945:2005 |
해상 항해 및 무선 통신 기기와 시스템 -
일반 요구 사항-시험 방법과 요구되는 시험 결과
9. 전자파 방출-시험 방법 및 요구되는 시험 결과
10. 전자파 환경의 내성-시험 방법 및 요구되는 시험 결과 |
RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : Max. 100 %
LFCS : 50 ㎐ ~ 10 kHz |
소재지 |
| KS C IEC 62236-5:2016 |
철도용 전기자기적합성 -
제5부:고정 전력공급 설비와 장치의 방출 및 내성 |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 3 GHz
EFT : ±4 kV
EFT : ±2 kV
CS : 150 kHz ~ 230 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) % |
소재지 |
| KS C IEC 62236-4:2016 |
철도용 전기자기적합성 -
제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 3 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 230 MHz
M/F : 0 A/m ~ 300 A/m
PMF : 0 A/m ~ 300 A/m
V-DIP : (0 ~ 100) % |
소재지 |
| KS C IEC 62236-3-2:2018 |
철도용 전기자기적합성 -
제3-2부:철도차량 - 장치 |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
THD : 0 % to 100 % |
소재지 |
| KS C IEC 62236-3-1:2016 |
철도용 전기자기적합성 -
제3-1부:철도차량 - 열차 및 공차 |
RE : 9 kHz ~ 1 GHz |
소재지 |
| KS C IEC 62236-2:2016 |
철도용 전기자기적합성 -
제2부:전체 철도 시스템에서 외부로 나가는 방출 |
RE : 9 kHz ~ 1 GHz |
소재지 |
| KS C IEC 62236-1:2016 |
철도용 전기자기적합성 -
제1부:일반 사항 |
- |
소재지 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
Disturbance Voltage : 9 kHz to 2.15 GHz |
소재지 |
| CISPR 25:2016 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers.
[Exception]
5. Measurement of emissions received by an antenna on the same vehicle
6.5 Radiated emissions from components/modules - TEM cell methods
6.6 Radiated emissions from components/modules - Strip line method |
RE : 150 kHz to 2.5 GHz
CE(VOLTAGE METHOD) : 150 kHz to 108 MHz
CE(CURRENT METHOD) : 150 kHz to 108 MHz |
소재지 |
| S2-W-5 |
기계,기구 등에 관한 공통 기술기준(전자파분야) |
RE: 9 ㎑ to 18 ㎓
CE: 9 ㎑ to 30 ㎒
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
V-DIP: (0 to 100) % |
소재지 |
| KS C 9610-3-12:2023 |
전자파적합성(EMC) — 제3-12부: 허용기준 — 공공 저압 배전망에 연결된 기기에서 발생하는 고조파 전류의 허용기준
(16 A < 상당 입력전류 ≤ 75 A) |
16 A ＜ I ≤ 75 A
정격 전류가 16 A 보다 크지만, 시험 조건에서 16 A이하의 기준 전류를 생성할 경우, KS C 9610-3-2:2023 |
소재지 |
| KS C 9547:2020 |
일반 조명기기 — 전자파적합성(EMC) 내성 요구사항 |
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
V-DIP : (0 ~ 100) %
M/F : 1 A/m |
소재지 |
| KS C 9040-2:2017 |
무정전전원장치(UPS) — 제2부:: 전자파적합성(EMC) 요구사항 |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
LF : 140 ㎐ ~ 360 ㎐ |
소재지 |
| KR:2016 |
제조법 및 형식승인 등에 관한 지침
제 3장 형식승인
23절 자동화시스템 14번 ~ 21번 항목 |
RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 ㎓, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : Max. 100 %
LFCS : 50 ㎐ ~ 10 kHz |
소재지 |
| ISO 7637-3:2016 |
Road vehicles - Electrical disturbances from conduction and coupling -
Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
12 V, 24 V, 42 V System |
소재지 |
| EN 61000-4-27:2000+A1:2009 |
Electromagnetic compatibility (EMC) -
Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase |
3 Phase 500 V, 63 Kva |
소재지 |
| EN 61000-4-28:2000+A1:2009 |
Electromagnetic compatibility (EMC) -
Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
3 Phase 500 V, 63 kVA |
소재지 |
| EN 61000-4-29:2000 |
Electromagnetic compatibility (EMC) -
Part 4-29: Testing and measurement techniques - Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests |
DC 500 V |
소재지 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) -
Part 4-2 : Testing and measurement techniques - Electrostatic discharge immunity test |
ESD : ±30 kV |
소재지 |
| EN 61000-4-34:2007+A1:2009 |
Electromagnetic compatibility (EMC) -
Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
3 Phase, (0 to 620) V |
소재지 |
| EN 61000-4-3:2006+A1:2008+A2:2010 |
Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz to 6 GHz |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EFT : ±4 kV |
소재지 |
| IEC 60601-1:2018 |
Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance 17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
- |
소재지 |
| IEC 60601-1-2:2014 |
Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests |
CE : 0.009 MHz to 30 MHz
RE : 0.009 MHz to 18 GHz
F/H : ≤ 16 A
ESD : 15 kV
RS : 28 V/m, 80 MHz to 6 GHz
EFT/B : 2 kV
Surge : 2 kV
CS : 10 V, 0.15 MHz to 80 MHz
MF : 30 A/m
Dips : 0 % to 100 % |
소재지 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements
Part 1: General requirements |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN 61000-4-13:2002+A2:2016 |
Electromagnetic compatibility (EMC) -
Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
16 ㎐ to 1 MHz |
소재지 |
| EN 61000-4-10:2017 |
Electromagnetic compatibility (EMC) -
Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
(10 to 100) A/m(peak) |
소재지 |
| IEC 61000-3-3:2013+A1:2017+A2:2021 |
Electromagnetic compatibility (EMC) -
Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
I ≤ 16 A |
소재지 |
| IEC 61000-3-2:2018+A1:2020 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits -
Limits for harmonic current emissions (equipment
input current 16 A per phase) |
I ≤ 16 A |
소재지 |
| IEC 61000-3-12:2011 |
Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
16 A ＜ I ≤ 75 A |
소재지 |
| IEC 61000-4-12:2017 |
Electromagnetic compatibility (EMC) -
Part 4-12: Testing and measurement techniques - Ring wave immunity test |
(250 to 6 000) V |
소재지 |
| EN 60601-1-2:2015+A1:2021 |
Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic disturbances – Requirements and tests |
CE : 0.009 MHz to 30 MHz
RE : 0.009 MHz to 18 GHz
F/H : ≤16 A
ESD : 15 kV
RS : 80 MHz to 6 GHz, 28 V/m
EFT/B : 2 kV
Surge : 2 kV
CS : 0.15 MHz to 80 MHz, 10 V
MF : 30 A/m
Dips : 0 % to 100 %
Proximity magnetic fields : 9 kHz ~ 26 MHz |
소재지 |
| EN 60601-1-2:2015 |
Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic disturbances – Requirements and tests |
CE : 0.009 MHz to 30 MHz
RE : 0.009 MHz to 18 GHz
F/H : ≤16 A
ESD : 15 kV
RS : 80 MHz to 6 GHz, 28 V/m
EFT/B : 2 kV
Surge : 2 kV
CS : 0.15 MHz to 80 MHz, 10 V
MF : 30 A/m
Dips : 0 % to 100 % |
소재지 |
| ISO 7637-2:2011 |
Road vehicles - Electrical disturbances from conduction and coupling -
Part 2: Electrical transient conduction along supply lines only |
12 V, 24 V, 42 V System |
소재지 |
| ISO 16750-2:2012 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment |
12 V, 24 V System |
소재지 |
| ISO 14982:1998 |
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria |
12 V, 24 V System |
소재지 |
| ISO 13766:2006 |
Earth-moving machinery - Electromagnetic compatibility |
RE : 30 MHz to 1 GHz |
소재지 |
| ISO 13766-2:2018 |
Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety
[Exception]
5.3.1 Stripline, TEM cell, TWC |
RS : 20 MHz to 2.7 GHz
ESD : ±15 kV
Conducted Transients : -220 V |
소재지 |
| CISPR 12:2009 |
Vehicles, boats and internal combustion engines – Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
RE : 150 kHz to 1 GHz |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
≤ 16 A, 50 ㎐ / 60 ㎐ |
소재지 |
| IEC 61326-2-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61326-2-2:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| ISO 11452-2:2019 |
Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part2:Absorber-lined shielded enclosure |
80 MHz to 6 GHz |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) — 제4-11부: 시험 및 측정기술 — 전압 강하, 순간 정전, 전압 변동 내성 시험 |
≤ 16 A, 50 Hz / 60 Hz |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) — 제4-2부: 시험 및 측정기술 — 정전기 방전 내성 시험 |
ESD: ±30 ㎸ |
소재지 |
| EN 12015:2014 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
RE : 30 MHz to 1 GHz
CE : 150 kHz to 30 MHz
H/F : ≤75 A |
소재지 |
| EN 61000-6-5:2015 |
Electromagnetic compatibility (EMC) -
Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±4 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 100 A/m
V-DIP : (0 to 100) %
CSLF : 15 ㎐ to 150 kHz
Dampeds osc : 2.5 kV
Ripple(DC) : 10 % Un |
소재지 |
| EN 55014-1:2017 |
Electromagnetic compatibility -
Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
RE : 30 MHz to 1 GHz
CE : 9 kHz to 30 MHz
Click : 150 kHz to 30 MHz
DP : 30 MHz to 300 MHz |
소재지 |
| EN 61000-3-3:2013+A1:2019 |
Electromagnetic compatibility (EMC) -
Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection equipment |
I ≤ 16 A |
소재지 |
| EN 61000-3-2:2014 |
Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmoniccurrent emissions (equipment input current ≤ 16 A per phase) 3 phase connection equipment |
I ≤ 16 A |
소재지 |
| EN 61000-3-12:2011 |
Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
16 A ＜ I ≤ 75 A |
소재지 |
| EN 50121-4:2016 |
Railway applications - Electromagnetic compatibility -
Part 4: Emission and immunity of the signalling and telecommunications apparatus |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
M/F : 300 A/m
PULSE M/F : 300 A/m |
소재지 |
| EN 50121-5:2017 |
Railway applications - Electromagnetic compatibility -
Part 5: Emission and immunity of fixed power supply installations and apparatus |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
M/F : 300 A/m
PULSE M/F : 300 A/m |
소재지 |
| EN 50121-5:2017+A1:2019 |
Railway applications - Electromagnetic compatibility -
Part 5: Emission and immunity of fixed power supply installations and apparatus |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20 V/m
EFT : ±2 kV
Surge: ±2 kV
CS: 150 kHz to 80 MHz, 10 V
M/F : 300 A/m
PULSE M/F : 300 A/m |
소재지 |
| EN 50130-4:2011+A1:2014 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 100 MHz
V-DIP : (0 to 100) %
LFCS : 0 ㎐ to 150 kHz |
소재지 |
| EN 50155:2017 |
Railway applications - Rolling stock - Electronic equipment |
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 3 V
V-DIP : Max. 100 %
MF : 30 A/m |
소재지 |
| EN 50155:2021 |
Railway applications - Rolling stock - Electronic equipment |
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 3 V
V-DIP : Max. 100 %
MF : 30 A/m |
소재지 |
| EN 50270:2015 |
Electromagnetic compatibility -
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 50500:2008+A1:2015 |
Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure |
EMF : 0 ㎐ to 20 kHz |
소재지 |
| IEC 61000-3-12:2011+AMD1:2021 |
Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
16 A ＜ I ≤ 75 A |
소재지 |
| IEC 61000-3-11:2017 |
Electromagnetic compatibility (EMC) -
Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
I ≤ 75 A |
소재지 |
| IEC 60974-10:2015 |
Arc weldling equipment -
Part 10: Electromagnetic compatibility
(EMC) requirements |
ripple: 10 kHz to 30 MHz
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 60945:2002 |
Maritime navigation and radiocommunication equipment and systems -
General requirements - Methods of testing and required test results
9. Electromagnetic emission-Methods of testing and required test results
10. Immunity to electromagnetic environment-Methods of testing and required test results |
RE : 9 kHz to 6 GHz
CE : 9 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
V-DIP : Max. 100 %
Variation : ±20 % voltage, ±10 % frequency |
소재지 |
| EN 55011:2016+A1:2017 |
Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits and methods of measurement |
RE : 9 kHz to 18 GHz
CE : 9 kHz to 30 MHz |
소재지 |
| MIL-STD-461G:2015 |
REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, audio frequency currents, power leads
5.5 CE102, conducted emissions, radio frequency potential, power leads,
5.6 CE106, conducted emissions, antenna terminal,
5.7 CS101, conducted susceptibility, power leads
5.11 CS109, conducted susceptibility, structure current
5.12 CS114, conducted susceptibility, bulk cable injection
5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation
5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads.
5.16 CS118, personnel borne electrostatic discharge
5.17 RE101, radiated emissions, magnetic field
5.18 RE102, radiated emissions, electric field
5.20 RS101, radiated susceptibility, magnetic field
5.21 RS103, radiated susceptibility, electric field
[Exception]
2 MHz to 150 MHz, 200 V/m |
CE101: 30 ㎐ to 10 kHz
CE102 : 10 kHz to 10 MHz
CE106 : 10 kHz to 40 GHz
CS101 : 30 ㎐ to 150 kHz
CS109 : 60 ㎐ to 100 kHz
CS114 : 4 kHz to 200 MHz
CS115 : Impulse excitation, 5 A
CS116 : 10 kHz to 100 MHz
CS118 : (±2 to ±15) kV
RE101 : 30 ㎐ to 100 kHz
RE102 : 10 kHz to 18 GHz
RS101 : 30 ㎐ to 100 kHz
RS103 : 2 MHz to 40 GHz |
소재지 |
| SAE J1113/41:2006 |
Limits And Methods Of Measurement Of Radio Disturbance Characteristics Of Components And Modules For The Protection Of Receivers In Board Vehicles |
CE(Power Line)
: 150 kHz to 108 MHz
CE(Signal Line)
: 150 kHz to108 MHz
RE : 150 kHz to 960 MHz |
소재지 |
| SAE J1113/42:2010 |
Electromagnetic Compatibility - Component Test Procedure -
Part 42: Conducted Transient Emissions |
12 V, 24 V System |
소재지 |
| SAE J1113/4:2014 |
Immunity To Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method |
1 MHz to 400 MHz |
소재지 |
| SEMI E78-0222:2022 |
Guide for Assess and Control Electrostatic Discharge (ESD) and Electrostatic Attraction (ESA) for Equipment |
ESD: ±8 ㎸ |
소재지 |
| SEMI E78-0912:2009 |
Guide for Assess and Control Electrostatic Discharge (ESD) and Electrostatic Attraction (ESA) for Equipment |
ESD: ±8 ㎸ |
소재지 |
| SEMI F47-0706:2006(Reapproved 0812) |
Specification for Semiconductor Processing Equipment Voltage Sag Immunity |
3Φ, (100 to 480) V |
소재지 |
SEMI F47-0706:2006
(Reapproved 0812)E |
Specification for Semiconductor Processing Equipment Voltage Sag Immunity |
3Φ, (100 to 480) V |
소재지 |
| SEMI S2-0818Ea:2018 |
Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment / section 25 Non-Ionizing Radiation and Field |
0 ㎐ to 6 GHz |
소재지 |
| EN 55011:2016 |
Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits and methods of measurement |
RE : 9 kHz to 18 GHz
CE : 9 kHz to 30 MHz |
소재지 |
| EN 55011:2016+A11:2020 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
RE : 9 kHz to 18 GHz
CE : 9 kHz to 30 MHz |
소재지 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 1 A/m
V-DIP : (0 to 100) % |
소재지 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) — 제6-2부: 일반기준 — 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 1 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
M/F: 3 A/m
V-DIP: (0 to 100) % |
소재지 |
| EN 50121-2:2017 |
Railway applications - Electromagnetic compatibility -
Part 2: Emission of the whole railway system to the outside world |
RE : 150 kHz to 1 GHz |
소재지 |
| CISPR 11:2015+A1:2016+A2:2019 |
Industrial, scientific and medical equipment - radio-frequency disturbance characteristics - Limits and methods of measurement |
RE : 9 kHz to 18 GHz
CE : 9 kHz to 30 MHz |
소재지 |
| IEC 61000-4-10:2016 |
Electromagnetic compatibility (EMC) -
Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
(10 to 100) A/m(peak) |
소재지 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 1 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS : 150 kHz to 230 MHz |
소재지 |
| EN 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test |
SURGE : ±6 kV |
소재지 |
| IEC 60601-1-2:2014+AMD1:2020 |
Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests |
CE : 0.009 MHz to 30 MHz
RE : 0.009 MHz to 18 GHz
F/H : ≤16 A
ESD : 15 kV
RS : 80 MHz to 6 GHz, 28 V/m
EFT/B : 2 kV
Surge : 2 kV
CS : 0.15 MHz to 80 MHz, 10 V
MF : 30 A/m
Dips : 0 % to 100 %
Proximity magnetic fields : 9 kHz ~ 26 MHz |
소재지 |
| IEC 60571:2012 |
Railway applications -
Electronic equipment used on rolling stock |
Over voltage: 0 V to 225 V
Surge : 0 kV to 4 kV
ESD : 0 kV to 15 kV
Burst : 0 kV to 4 kV
RS : 25 MHz to 6 GHz |
소재지 |
| IEC 60533:2015 |
Electrical and electronic installations in ships -
Electromagnetic compatibility (EMC) - Ships with a metallic hull |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
LFCS : 50 ㎐ to 10 kHz |
소재지 |
| IEC 60092-504:2016 |
Electrical installations in ships -
Part 504: Automation - Control and instrumentation |
RE : 30 MHz to 1 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
V-DIP : Max. 100 % |
소재지 |
| ETSI EN 301 489-3 V2.3.2 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| ETSI EN 301 489-24 V1.5.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24:Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 60601-1:2006+A1:2013 |
Medical electrical equipment -
Part 1: General requirements for basic safety and essential performance 17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
- |
소재지 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and systems — General requirements
9 Electromagnetic emission – Methods of testing and required test results
10 Immunity to electromagnetic environment – Methods of testing and required test results |
RE : 9 kHz to 6 GHz
CE : 9 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
V-DIP : Max. 100 %
Variation : ±20 % voltage, ±10 % frequency |
소재지 |
| EN 61000-3-11:2001 |
Electromagnetic compatibility (EMC) -
Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated voltage current ≤ 75 A and subject to conditional connection |
I ≤ 75 A |
소재지 |
| EN 50121-3-1:2017 |
Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle |
RE : 150 kHz to 1 GHz |
소재지 |
| EN 50121-3-2:2016 |
Railway applications - Electromagnetic compatibility -
Part3-2:Rolling stock-Apparatus |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
M/F : 30 A/m |
소재지 |
| EN 50121-3-2:2016+A1:2019 |
Railway applications - Electromagnetic compatibility -
Part3-2:Rolling stock-Apparatus |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
M/F : 30 A/m |
소재지 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MH |
소재지 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 3 A/m
V-DIP : (0 to 100) % |
소재지 |
| EN 61000-4-9:2016 |
Electromagnetic compatibility (EMC) -
Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
(100 to 1 000) A/m(peak) |
소재지 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
M/F : 300 A/m |
소재지 |
| EN 55032:2015+A1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
Disturbance Voltage
: 9 kHz to 2.15 GHz |
소재지 |
| SEMI S2-0821:2021 |
Environmental, Health, and Safety Guideline for Semiconductor Manufacturing Equipment / section 25 Non-Ionizing Radiation and Field |
0 ㎐ to 6 GHz |
소재지 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 62236-3-1:2018 |
Railway applications - Electromagnetic compatibility -
Part 3-1: Rolling stock - Train and complete vehicle |
RE : 150 kHz to 1 GHz |
소재지 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility -
Part 3-2: Rolling stock - Apparatus |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 10 V
THD : 0 % to 100 % |
소재지 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility -
Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 0 A/m to 300 A/m
PMF : 0 A/m to 300 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility -
Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEEE . Std 519-1992 |
IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems |
Voltage & Current Harmonic : Up to 40th |
소재지 |
| IEEE . Std 519-2014 |
IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems |
Voltage & Current Harmonic : Up to 40th |
소재지 |
| ISO 10605:2008 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
ESD : 30 kV |
소재지 |
| ISO 11451-2:2015 |
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 2: Off-vehicle radiation sources |
Frequency band : 0.01 MHz to 18 GHz
Test level : 100 V/m |
소재지 |
| NRC REGULATORY GUIDE 1.180 : 2000 |
Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems
4.1 CE101-Conducted emissions, low frequency
4.2 CE102-Conducted emissions, high frequency
4.3 CS101-Conducted susceptibility, low frequency
4.4 CS114-Conducted susceptibility, high frequency
4.5 RE101-Radiated emissions, magnetic field
4.6 RE102-Radiated emissions, electric field
4.7 RS101-Radiated susceptibility, magnetic fields
4.8 RS103-Radiated susceptibility, electric fields
6.1 Ring wave
6.2 Combination wave
6.3 Electrically fast transients |
CE101 : 30 Hz to 10 kHz
CE102 : 10 kHz to 10 MHz
CS101 : 30 kHz to 50 kHz
CS114 : 10 kHz to 400 MHz
RE101 : 30 Hz to 100 kHz
RE102 : 10 kHz to 1 GHz
RS101 : 30 Hz to 10 kHz
RS103 : 10 kHz to 1 GHz
Surge : Ring wave ±3 kV, Combination : ±3 kV
Burst : ±3 Kv |
소재지 |
| ETSI EN 301 489-5 V2.2.9 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard for ElectroMagnetic Compatibility |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| ETSI EN 301 489-9 V2.1.1 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| ETSI EN 301 489-13 V2.1.1 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| ETSI EN 301 489-52 V1.3.1 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| KS C IEC 60571:2012 |
Railway applications -
Electronic equipment used on rolling stock |
Over voltage: 0 V to 225 V
Surge : 0 kV to 4 kV
ESD : 0 kV to 15 kV
Burst : 0 kV to 4 kV
RS : 25 MHz to 6 GHz |
소재지 |
| IEC 60730-1:2013+A1:2015+A2:2020 |
Automatic electrical controls - Part 1: General requirements
Clause 23 Electromagnetic compatibility (EMC) requirements – Emission, Clause 26 Electromagnetic compatibility (EMC) requirements – Immunity |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
Click : 150 kHz to 30 MHz
DP : 30 MHz to 300 MHz
ESD : ±8 kV
RS : 80 MHz to 2.7 GHz
EFT : ±4 kV
Surge : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 10 A/m
Dip : 16 A, 50 Hz / 60 Hz
Variation : 3 Phase 500 V, 63 KVA
Low frequency : 16 Hz to 1 MHz |
소재지 |
| EN 13309:2010 |
Construction machinery -
Electromagnetic compatibility of machines with internal power supply
[Exception]
4.7.2 Stripline Test
4.7.2 TEM Cell Test |
RE : 30 MHz to 1 GHz
RS : 20 MHz to 2 GHz
ESD : ±8 kV
EFT : ±2 kV
Burst : ±4 kV
CS : 150 kHz to 80 MHz |
소재지 |
| EN 50121-1:2017 |
Railway applications - Electromagnetic compatibility -
Part1:General |
- |
소재지 |
| EN 55012:2007+A1:2009 |
Vehicles, boats and internal combustion engines -
Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers |
RE : 150 kHz to 1 GHz |
소재지 |
| ISO 11452-1:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 1: General principles and terminology |
General |
소재지 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD : ±8 kV
RS : 80 MHz to 5 GHz, 3V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz, 3V
V-DIP : Max. 100 %
M/F : 1 A/m
EFT : ±1 kV
Surge : ±2 kV |
소재지 |
| ECE R10.06 – Amendment 4: 2025 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility |
RE : 30 MHz to 1 GHz
ALSE : 80 MHz to 6 GHz
BCI : 20 MHz to 400 MHz
CTI : Pulse 1, 2a, 2b, 3a, 3b, 4
CTE : 12 V, 24 V System
CE(AC, DC Power) : (0.15 to 30) MHz
Harmonic Current Emission :
I ≤ 16 A,
16 A ＜ I ≤ 75 A
Voltage Fluctuation and Flicker :
I ≤ 16 A,
16 A ＜ I ≤ 75 A
EFT : ±2 kV
Surge : ±2 kV |
소재지 |
| IEC 61000-4-16:2015 |
Electromagnetic compatibility (EMC) -
Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 ㎐ to 150 ㎑ |
0 ㎐ to 150 kHz |
소재지 |
| IEC 61000-4-19:2014 |
Electromagnetic compatibility (EMC) -
Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 ㎑ to 150 ㎑ at a.c. power ports |
LFCS: (2 to 150) kHz |
소재지 |
| IEC 61000-4-29:2000 |
Electromagnetic compatibility (EMC) -
Part 4-29: Testing and measurement techniques - Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests. Voltage dips, short interruptions and voltage variations on d.c.input power ports. Immunity tests |
DC 500 V |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility
Part 6-4: Generic standard - Emission standard
for industrial environments |
RE: 30 ㎒ to 6 ㎓
CE: 150 ㎑ to 30 ㎒ |
소재지 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC)–
Part 6-3: Generic standards – Emission standard for equipment in residential
environments |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz |
소재지 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part2-6: Particular requirements.
In vitro diagnostic(IVD) medical equipment |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±15 kV
RS : 80 MHz to 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part2-6: Particular requirements.
In vitro diagnostic(IVD) medical equipment |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| EN 61547:2009 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD : ±8 kV
RS : 80 MHz to 1 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 1 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes -
EMC immunity requirements |
ESD : ±8 kV
RS : 80 MHz to 1 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
V-DIP : (0 to 100) %
M/F : 3 A/m |
소재지 |
| IEC 62040-2:2016 |
Uninterruptible power systems (UPS) -
Part 2: Electromagnetic compatibility (EMC) requirements |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 1 GHz
ESD : ±8 kV
RS : 80 MHz to 1 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
LF : 140 ㎐ to 360 ㎐ |
소재지 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: ±30 ㎸ |
소재지 |
| IEC 61000-4-34:2009 |
Electromagnetic compatibility (EMC) -
Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
3Φ, (0 to 620) V |
소재지 |
| IEC 61000-4-3:2010 |
Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz to 6 GHz |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EFT: ±4 ㎸ |
소재지 |
| IEC 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test |
SURGE: ±6 ㎸ |
소재지 |
| IEC 61000-4-6:2013 |
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz to 230 MHz |
소재지 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement techniques-Power frequency magnetic field immunity test |
M/F : 300 A/m |
소재지 |
| IEC 61000-4-9:2016 |
Electromagnetic compatibility (EMC) -
Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
(10 to 100) A/m(peak) |
소재지 |
| IEC 61000-6-5:2015 |
Electromagnetic compatibility (EMC) -
Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±4 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 100 A/m
V-DIP : (0 to 100) % |
소재지 |
| ISO 11451-3:2015 |
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 3: On-board transmitter simulation |
Frequency band
: 1.8 MHz to 2.6 GHz, P : 20 W |
소재지 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control
and laboratory use - EMC requirements
Part 2-5: Particular requirements - Test
configurations, operational conditions and
performance criteria for devices with field bus
interfaces according to IEC 61784-1 |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 18 GHz
ESD : ±8 kV
RS : 80 MHz to 3 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz to 230 MHz
M/F : 30 A/m
V-DIP : (0 to 100) %
H/F : ≤ 16 A |
소재지 |
| IEC 61000-6-7:2014 |
Electromagnetic compatibility (EMC) -
Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
ESD : ±8 kV
RS : 80 MHz to 6.0 GHz
EFT : ±4 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 100 A/m
V-DIP : (0 to 100) % |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements |
CE : 150 kHz to 30 MHz
RE : 30 MHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz to 80 MHz
M/F : 30 A/m
V-DIP : (0 to 100) % |
소재지 |
| ISO 11452-4:2020 |
Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part4:Harness excitation methods |
100 kHz to 400 MHz |
소재지 |
| ▶ 에너지효율 |
| 기후에너지환경부고시 제2026-26호(2026.1.23) |
효율관리 기자재_운용규정
38. 컨버터 내장형 LED 램프
39. 컨버터 외장형LED 램프
42. 사이니지 디스플레이
47. 직관형 LED램프(컨버터 외장형) |
전압:
DC 120 V 이하
AC 270 V 이하
전력:
DC (0 ~ 720) W
AC (0 ~ 2 000) W
역률(PF):
(0.1 ~ 1.0) |
소재지 |
| IEC 62552:2007 |
Household refrigerating appliances – Characteristics and test methods |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| 기후에너지환경부고시 제2026-25호(2026.1.23) |
대기전력저감 프로그램 운용규정
별표 1의 3. 프린터
별표 1의 5. 복사기
별표 1의 6. 스캐너
별표 1의 8. 자동절전제어장치
별표 1의 10. 오디오
별표 1의 11. DVD플레이어
별표 1의 12. 라디오 카세트
별표 1의 13. 전자레인지
별표 1의 15. 도어폰
별표 1의 16. 유무선전화기
별표 1의 20. 손건조기
별표 1의 21. 서버
별표 1의 23. 유무선공유기 |
3 kW 이하
5 kW 이하
1 kW 이하
-
1 kW 이하
150 W 이하
1 kW 이하
4 kW 이하
100 W 이하
150 W 이하
3 kW 이하
3 kW 이하
- |
소재지 |
| 기후에너지환경부고시 제2026-26호(2026.1.23) |
효율관리 기자재 운용규정
제4조의 1. 전기냉장고
제4조의 3. 김치냉장고
제4조의 9. 전기냉온수기
제4조의 10. 전기밥솥
제4조의 12. 선풍기
제4조의 20. 어댑터, 충전기
제4조의 22. 상업용전기냉장고
제4조의 26. 텔레비전수상기
제4조의 28. 전기스토브
제4조의 30. 제습기
제4조의 36. 전기레인지
제4조의 37. 셋톱박스
제4조의 44. 모니터
제4조의 49. 컴퓨터
제4조의 50. 복합기 |
1 000 L 이하
1 000 L 이하
3 000 W 이하
20 인분 이하
20 cm ~ 41 cm
150 W 이하
300 L ~ 2 000 L
47 cm ~ 216 cm
500 W ~ 10 kW
1000 W 이하
1 kW ~ 10 kW
150 W 이하
153 cm 이하
-
- |
소재지 |
| EN 62552-1:2020+A11:2024 |
Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| EN 62552-2:2020+A11:2024 |
Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| EN 62552-3:2020+A11:2024 |
Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| 기후에너지환경부고시 제2026-4호(2026.1.12) |
고효율 에너지 기자재보급촉진에 관한규정
20. 등기구
21. LED 램프 |
입력 전압:
AC 300 V 이하
전류: 10 A 이하
전력: 3 000 W 이하
역률(PF):
(0.1 ~ 1.0) |
소재지 |
| IEC 62552-2:2015+A1:2020 |
Household refrigerating appliances - Characteristics and test methods -
Part 2: Performance requirements |
Input Voltage:
Max. 300 V
Input Frequency: (50/60) Hz
Max. 10 kw |
소재지 |
| KS C IEC 62301:2011 (2022 확인) |
가정용 전기기기의 대기전력 측정방법 |
입력 전압:
500 V 이하
입력 주파수:
(50/60) Hz |
소재지 |
| IEC 62552-3:2015+A1:2020 |
Household refrigerating appliances - Characteristics and test methods -
Part 3: Energy consumption and volume |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| IEC 62301:2011 |
Household electrical appliances -
Measurement of standby power |
Input Voltage:
Max. 500 V
Input Frequency: (50/60) Hz |
소재지 |
| IEC 62552-1:2015+A1:2020 |
Household refrigerating appliances - Characteristics and test methods -
Part 1: General requirements |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| EN 62552:2013 |
Household refrigerating appliances - Characteristics and test methods |
Input Voltage:
Max. 300 V
Input Frequency:
(50/60) Hz
Max. 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| KRS SG 0059-23(R) |
ATS 지상장치
Automatic Train Stop Wayside Transmitter
[제외항목]
4.2.1 시험의 분류
- 나. 재질시험 |
온도: (-40 ~ 70) ℃
습도: 95 % R.H. 이하.
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| IEC 60068-2-42:2003 |
Environmental testing -
Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
Temperature:
25 ℃
Humidity:
(70 ~ 80) % R.H. |
소재지 |
| IEC 60068-2-43:2003 |
Environmental testing -
Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections |
온도:
25 ℃
습도:
(70 ~ 80) % R.H. |
소재지 |
| KS R 9197:2022 |
철도 차량의 절연 저항 및 내전압 시험 방법 |
절연내력: 1 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| KS X IEC 60945:2002 |
해상 항해 및 무선 통신 기기와 시스템 - 일반요구사항- 시험방법과 요구되는 시험 결과
7.1 과도 전원 공급
8.1 일반
8.2 건조 고온
8.3 온습도
8.4 저온
8.6.1 낙하
8.7 진동
8.8 비와 살수(노출용 장비)
8.9 침수
8.9.3 휴대용 장비 (일시적 침수)
8.12 부식 |
고온온도: (55 ~ 70) ℃
온도: 40 ℃, 습도: 95 %R.H
저온온도: (-30 ~ -15) ℃
주파수: (5 ~ 100) ㎐
가속도: 7 ㎨ 이하.
염수 농도: 5 % NaCl,
pH: (6.5 ~ 7.2)
온도: 35 ℃ |
소재지 |
| KRS CS 0003-24(R) |
철도차량 차상신호장치 신호방법
Railway Rolling Stock-Test methods : Train signaling and telecommunications |
온도: (-40 ~ 85) ℃
습도: 95 % R.H. 이하.
절연내력: 1 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| GMW 3172:2015 |
General Specification for Electrical/Electronic Components - Environmental/Durability
9 Design Validation (DV)
9.3 Mechanical
9.3.1 Vibration with Thermal Cycling
9.3.2 Mechanical Shock - Pothole
9.3.3 Mechanical Shock - Collision
9.3.4 Mechanical Shock - Closure Slam
9.4 Climatic
9.4.1 High Temperature Degradation
9.4.2 Thermal Shock Air-To-Air (TS)
9.4.3 Power Temperature Cyclic (PTC)
9.4.5 Humid Heat Cyclic (HHC)
9.4.6 Humid Heat Constant (HHCO)
9.4.7 Salt Mist
9.4.8 Salt Spray |
Temperature:
(-65 ~ 175) ℃
Humidity:
(20 ~ 95) % R.H.
Frequency:
(5 ~ 2 000) Hz
Aceleration:
(0.98 ~ 500) m/s²
Duration:
(5 ~ 30) ms |
소재지 |
| MIL-STD-202G:2013 |
Department of Defense test method standard electronic and electrical component parts
101E Salt Atmosphere (corrosion)
103B Humidity (Steady state)
106G Moisture Resistance
107G Thermal Shock
201A Vibration
204D Vibration, High frequency
213B Shock (Specified pulse)
214A Random Vibration |
Temperature: 35 ℃
Salt solution concentration :
5 % NaCl
pH: (6.5 ~ 7.2) Humidity:
(20 ~ 95) % R.H. Temperature:
(-10 ~ 70) ℃ Humidity:
(20 ~ 95) % R.H. Temperature:
(-65 ~ 175) ℃ Frequency:
(10 ~ 55) Hz Frequency:
(5 ~ 2 000) Hz Acceleration:
(294 ~ 500) m/s² Duration:
(6 ~ 11) ms Frequency:
(50 ~ 2 000) Hz |
소재지 |
| IEC 60068-2-38:2021 |
Environmental testing -
Part 2-38: Tests - Test Z/AD : Composite temperature/humidity cyclic test |
Temperature:
(-10 ~ 55) ℃ Humidity:
(20 ~ 95) % R.H. |
소재지 |
| MIL-STD-810H:2019 |
Department of Defense test method standard
Environmental Engineering Considerations and Laboratory Tests
501.7 High Temperature
502.7 Low Temperature
503.7 Temperature Shock
506.6 Rain
[Exception]
ProcedureⅡ-Exaggeraterl
Procedure Ⅲ-Drip
507.6 Humidity
509.7 Salt Fog
514.8 Vibration
[Exception]
ProcedureⅡ - Loose Cargo Transportation
Procedure Ⅲ- Large Assembly Transportation
516.8 Shock
[Exception]
Procedure Ⅶ-Pendulum Impact
Procedure Ⅷ-Catapult
Launch/Arrested Landing
High Speed Craft –
Duration 20 g, 5g 23ms
528 Mechanical Vibration of
Shipboard Material
(Type 1 - Environmental Vibration) |
Temperature:
(-65 ~ 175) ℃ Humidity:
(20 ~ 95) % R.H. Temperature: 35 ℃
Salt solution concentration:
5 % NaCl
pH: (6.5 ~ 7.2) Frequency:
(5 ~ 2000) Hz Acceleration:
(147 ~ 980) m/s² Duration:
(6 ~ 11) ms |
소재지 |
| KS R 1034:2006 |
자동차 부품 진동 시험 방법 |
Frequency:
(5 ~ 2 000) Hz Acceleration:
(4.9 ~ 490) m/s² |
소재지 |
| KR:2024 |
제조법 및 형식승인 등에 관한 지침
제3장 형식승인
제23절 자동화시스템
(규칙 6편 2장)
2304. 형식시험
[제외항목]
5. 동력원 변동시험 |
온도: (-25 ~ 70) ℃
온도 & 습도
(20 ~ 55) ℃,
(80 ~ 95) %
주파수: 5 ~ 100) ㎐
가속도: ± 0.7 g.
염수농도: 5 % NaCl, pH: (6.5 ~ 7.2)
온도: 35 ℃ |
소재지 |
| IEC 60068-2-64:2008+A1:2019 |
Environmental testing -
Part 2-64: Tests - Test Fh : Vibration, broadband random and guidance |
Frequency:
(5 ~ 2 000) Hz
Acceleration:
(0.98 ~ 300) m/s² r.m.s |
소재지 |
| IEC 60571:2012 |
Railway applications -
Electronic equipment used on rolling stock |
Temperature:
(-40 ~ 250) ℃
Humidity:
Max. 95 % R.H.
Electric Strength:
Max. 1 500V
Insulation
Resistance:
Max. 5 000 MΩ |
소재지 |
| MIL-STD-202H:2015 |
Department of Defense test method standard electronic and electrical component parts
101 Salt Atmosphere (corrosion)
103 Humidity (Steady state)
106 Moisture Resistance
107 Thermal Shock
201 Vibration
204 Vibration, High frequency
213 Shock (Specified pulse)
214 Random Vibration |
Temperature: 35 ℃
Salt solution concentration :
5 % NaCl
pH: (6.5 ~ 7.2) Humidity:
(20 ~ 95) % R.H. Temperature:
(-10 ~ 70) ℃ Humidity:
(20 ~ 95) % R.H. Temperature:
(-65 ~ 175) ℃ Frequency:
(10 ~ 55) Hz Frequency:
(5 ~ 2 000) Hz Acceleration:
(294 ~ 500) m/s² Duration:
(6 ~ 11) ms Frequency:
(50 ~ 2 000) Hz |
소재지 |
| KS C IEC 60068-2-38:2021 |
환경시험-
제2-38부:시험- 시험Z/AD : 합성온도/습도 사이클 |
온도 :
(-10 ~ 55) ℃
습도 :
(20 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-42:2003 |
환경 시험 -
제 2-42 부 시험 Kc: 접점 및 접점부에 대한 이산화황 시험 |
온도 :
25 ℃
습도 :
(70 ~ 80) % R.H. |
소재지 |
| IEC 60068-2-53:2010 |
Environmental testing -
Part 2-53: Tests and guidance - Combined climatic (temperature / humidity) and dynamic (vibration / shock ) tests |
Temperature:
(-65 ~ 5) ℃ Temperature:
(30 ~ 175) ℃ Frequency:
(5 ~ 2 000) Hz
Acceleration:
(1 ~ 500) m/s² |
소재지 |
| KRS SG 0014-24(R) |
신호용전원공급장치
Power Supply for Signal Device |
온도: (-20 ~ 70) ℃
습도: (20 ~ 80) % R.H.
절연내력:1 000 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| KRCS C229 05:2022 |
전자연동장치 |
온도: (-10 ~ 50) ℃
습도: 95 % R.H. 이하.
절연내력: 1 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| KS C IEC 60068-2-6:2015 |
환경시험-
제2-6부:시험- 시험 Fc: 진동(정현파) |
주파수 :
(5 ~ 2 000) Hz
가속도 :
(1 ~ 500) m/s² |
소재지 |
| IEC 62498-3:2010 |
Railway applications - Environmental conditions for equipment -
Part 3: Equipment for signalling and telecommunications
4.13 Vibrations and shocks |
Vibrations:
(5 ~ 2 000) ㎐,
(2.3 ~ 280) ㎨ r.m.s.
Shocks:
(20 ~ 500) ㎨,
(5 ~ 11) ㎳ |
소재지 |
| IEC 61373:2010 |
Railway applications -
Rolling stock equipment - Shock and vibration tests
[Exception]
10. Shock testing conditions
Test severity Category 3 Axis mounted |
Frequency:
(2 ~ 500) Hz Acceleration:
(0.37 ~ 144) m/s² r.m.s Acceleration:
(30 ~ 1 000) m/s²
Duration:
(6 ~ 30) ms |
소재지 |
| MIL-STD-810C:1975 |
Military Standard Environmental Test Methods
501.1 High Temperature
502.1 Low Temperature
503.1 Temperature Shock
507.1 Humidity
509.1 Salt Fog
514.2 Vibration
516.2 Shock |
Temperature:
(-65 ~ 175) ℃ Humidity:
(20 ~ 95) % R.H. Temperature: 35 ℃
Salt solution concentration:
5 % NaCl
pH: (6.5 ~ 7.2) Frequency:
(5 ~ 2 000) Hz Acceleration:
(147 ~ 980) m/s² Duration:
(6 ~ 11) ms |
소재지 |
| KRS SG 0036-22 (R) |
궤도회로기능감시장치 |
온도: (-30 ~ 70) ℃
습도: 95 % R.H. 이하.
절연내력: 1 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| KS C 7620:2003 |
철도 차량용 형광등 기구
[제외항목]
7.2 특성 시험
7.8 수명 시험
7.11 광속비 시험
7.13 잡음의 세기 시험 |
온도: 200 ℃ 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| KS C IEC 60068-2-53:2010 |
환경 시험 — 제2-53부: 시험 — 시험 및 지침: 기후(온도/습도) 및 동적(진동/충격) 결합 시험 |
온도: (-65 ~ 5) ℃
온도: (30 ~ 175) ℃
주파수: (5 ~ 2 000) ㎐
가속도: (0.98 ~ 500) ㎨ |
소재지 |
| KRS SG 0033-24(R) |
유절연가청주파수(AF)궤도회로
[제외항목]
4.2.2 시험의 방법
- 2) 재질 시험
- 11) 충격파 시험 |
온도: (-40 ~ 70) ℃
습도: 95 % R.H. 이하.
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| MIL-STD-167-1A :2005 |
Department of Defense test method standard Mechanical Vibration of shipboard equipment
(Type 1 - Environmental) |
Frequency:
(5 ~ 33) Hz |
소재지 |
| ISO 20653:2023 |
Road vehicle - Degrees of protection
(IP code) - Protection of electrical equipment against foreign objects, water and access |
IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8
IP1X, IP2X, IP3X, IP4X, IP5X, IP6X, IPX4K, PX5K, PX6K, PX9K |
소재지 |
| ISO 16750-4:2023 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4 : Climatic loads
5.1 Tests at constant temperature
5.2 Temperature step test
5.3 Temperature cycling tests
5.5 Salt spray tests
5.6 Humid heat, cyclic test
5.7 Damp Heat, steady-state test
5.11 Dust test
[Exception]
5.4 Cold water shock tests
5.8 Condensation test
5.9 Corrosion test with flow of mixed gas
5.10 Solar radiation
5.12 Atmospheric pressure test |
Temperature:
(-65 ~ 175) ℃
Humidity:
(20 ~ 95) % R.H.
Salt solution concentration:
Temperature:
35 ℃ 5 % NaCl, pH: (6.5 ~ 7.2) |
소재지 |
| KRS SG 0067-24(R) |
지상 신호제어설비 시험방법
Track-side Subsystem- Test methods : Equipments for Signalling |
온도: (-40 ~ 70) ℃
습도: 90 % R.H. 이하
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| IEC 60068-2-6:2007 |
Environmental testing -
Part 2-6: Tests - Test Fc : Vibration (sinusoidal) |
Frequency:
(5 ~ 2 000) Hz
Acceleration:
(10 ~ 500) m/s² |
소재지 |
| KS C IEC 60529:2013 |
외곽의 방진 보호 및 방수 보호 등급
(IP 코드)
[제외항목]
제2 특성 숫자 IPX9 |
IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8
IP1X, IP2X, IP3X,
IP4X ,IP5X ,IP6X |
소재지 |
| KS C IEC 60068-2-78:2012 |
환경 시험 — 제2-78부: 시험 — 시험 Cab: 안정 상태의 내습성 시험 |
온도 / 습도 :
30 ℃, 93 % R.H. 30 ℃, 85 % R.H. 40 ℃, 93 % R.H. 40 ℃, 85 % R.H. |
소재지 |
| KS C IEC 60068-2-60:2015 |
환경 시험 -제2-60부: 시험 -시험 Ke: 유동 혼합가스부식 시험 |
온도 :
(15 ~ 60) ℃
습도 :
(10 ~ 93) % R.H. |
소재지 |
| KS D 9502:2024 |
염수 분무 시험 방법
(중성, 아세트산 및 캐스 분무 시험
[제외항목]
11.2 아세트산 염수 분무 시험 |
온도: (15 ~ 35) ℃
염수농도 :
5 % NaCl, pH: (6.5 ~ 7.2) |
소재지 |
| EN 60945:2002 |
Maritime navigation and radio communication equipment and systems. General requirements.
Methods if testing and required test results
7.1 Extreme power supply
8.1 General
8.2 Dry heat
8.3 Damp heat
8.4 Low temperature
8.6.1 Drop on hard surface
8.7 Vibration
8.8 Rain and Sprat(exposed equipment)
8.9 Immersion
8.9.3 Portable equipment*temporary immersion)
8.12 Corrosion |
High Temp.:
(55 ~ 70) ℃
Temp. & Humid.:
40 ℃, 95 %R.H.
Low Temp.:
(-30 ~ -15) ℃
Frequency:
(2 ~ 100) ㎐
Acceleration:
Max 7 m/s²
Slat solution
concentration:
Temperature:
35 ℃ 5 % NaCl,
pH: (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60092-504:2001 |
선박용 전기설비-
제504부：특별사항-제어 및 사용
[제외항목]
3. 고압 시험 |
온도 :
(-65 ~ 175) ℃
습도:
(20 ~ 95) % R.H.
온도: 35 ℃
염수농도 : 5 % NaCl, pH:
(6.5 ~ 7.2)
주파수 : (5 ~ 2 000) ㎐
가속도: (9.8 ~ 500) ㎨
지속시간: (1 ~ 30) ㎳
IP1X to IP6X
IPX1 to IPX9 |
소재지 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기 |
온도: (-40 ~ 250) ℃
습도: 95 % R.H. 이하.
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| IEC 60068-2-27:2008 |
Environmental testing -
Part 2-27: Tests - Test Ea and guidance : Shock |
Aceleration:
(50 ~ 500) m/s²
Duration:
(5 ~ 30) ms |
소재지 |
| IEC 60068-2-30: 2025 |
Environmental testing -
Part 2-30: Tests - Test Db : Damp heat, cyclic (12h + 12h cycle) |
Temperature:
(25 ~ 55) ℃ Humidity:
(45 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-1:2007 |
환경시험-
제2-1부:시험- 시험 A: 내한성 시험 |
온도:
(-65 ~ 5) ℃ |
소재지 |
| MIL-STD-810G:2008 |
Department of Defense test method standard
Environmental Engineering Considerations and Laboratory Tests
501.5 High Temperature
502.5 Low Temperature
503.5 Temperature Shock
506.5 Rain
[Exception]
ProcedureⅡ-Exaggeraterl
Procedure Ⅲ-Drip
507.5 Humidity
509.5 Salt Fog
514.6 Vibration
[Exception]
ProcedureⅡ - Loose Cargo Transportation
Procedure Ⅲ- Large Assembly Transportation
516.6 Shock
[Exception]
Procedure Ⅶ-Pendulum Impact
Procedure Ⅷ-Catapult
Launch/Arrested Landing
528 Mechanical Vibration of Shipboard Material
(Type 1 - Environmental Vibration) |
Temperature:
(-65 ~ 175) ℃ Humidity :
(20 ~ 95) % R.H. Temperature: 35 ℃
Salt solution concentration:
5 % NaCl
pH: (6.5 ~ 7.2) Frequency:
(5 ~ 2000) Hz Acceleration:
(147 ~ 980) m/s² Duration:
(6 ~ 11) ms |
소재지 |
| KRS CM 0026-22(R) |
차량과 지상간 데이터 전송장치 시험방법 |
온도: (-65 ~ 175) ℃
습도: 95 % R.H. 이하.
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| IEC 60092-504:2016 |
Electrical installations in ships -
Part 504 : Special features－ Control and instrumentation
[Exception]
3. High Voltage test |
Temperature:
(-65 ~ 175) ℃
Humidity:
(20 ~ 95) % R.H.
Temperature: 35 ℃
Salt solution
concentration:
5 % NaCl, pH:
(6.5 ~ 7.2)
Frequency:
(5 ~ 2 000) ㎐
Aceleration:
(9.8 ~ 500) ㎨
Duration:
(5 ~ 30) ㎳
IP1X to IP6X
IPX1 to IPX9 |
소재지 |
| KS C IEC 60068-2-11:2021 |
환경시험-
제2-11부:시험- 시험 Ka: 염수분무시험 |
온도: 35 ℃
염수 농도:5 % NaCl,
pH: (6.5 ~ 7.2) |
소재지 |
| IEC 60068-2-52:2017 |
ENVIRONMENTAL TESTING –
Part 2-52: Tests – Test Kb: Salt mist, cyclic
(sodium chloride solution)
[Exception]
9.4.9 Test Method 8
(Acidifled salt solution) |
Temperature:
(15 ~ 35) ℃
23 ℃, (40 ~ 55) % R.H.
40 ℃, 93 % R.H.
Slat solution concentration:
5 % NaCl,
pH: (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-14: 2023 |
환경시험-
제2-14부:시험- 시험 N: 온도변화
7 시험 Na : 규정된 이동시간을 갖는 온도의 급변
8 시험 Nb : 규정된 변화율을 갖는 온도 변화 |
온도 :
(-65 ~ 175) ℃ |
소재지 |
| KS R 9193:2022 |
철도 신호 보안 부품의 절연 저항 및 내전압 시험 방법 |
절연내력: 5 000 V 이하.
절연저항: 5 000 MΩ 이하 |
소재지 |
| IEC 60068-2-2: 2025 |
Environmental testing -
Part 2-2: Tests - Test B : Dry heat |
Temperature:
(30 ~ 175) ℃ |
소재지 |
| ISO 16750-3:2023 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment -
Part 3 : Mechanical loads
4.1 Vibration
[Exception]
4.2 Mechanical Shock
4.3 Free Fall
4.4 Surface strength/scratch and abrasion resistance
4.5 Gravel bombardment |
Frequency:
(5 ~ 2 000) Hz
Temperature:
(-65 ~ 175) ℃ |
소재지 |
| KRS SG 0054-24(R) |
단선 자동폐색제어장치
Single Track Automatic Block Control Device
[제외항목]
4.2.2 시험방법
- 2) 접점 용량시험 |
온도: (-40 ~ 70) ℃
습도: 90 % R.H. 이하.
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| IEC 60068-2-78: 2025 |
Environmental testing -
Part 2-78: Tests - Test Cab : Damp heat, steady state |
Temperature
/Humidity:
30 ℃, 93 % R.H. 30 ℃, 85 % R.H. 40 ℃, 93 % R.H. 40 ℃, 85 % R.H. |
소재지 |
| IEC 60068-2-60:2015 |
Environmental Testing -
Part 2: Tests - Test Ke: Flowing mixed gas corrosion test |
Temperature:
(15 ~ 60) ℃
Humidity:
(10 ~ 93) % R.H. |
소재지 |
| IEC 60068-2-57:2013 |
Environmental Testing -
Part 2-57: Tests - Test Ff : Vibration - Time-history and sine-beat method |
Frequency:
(5 ~ 2 000) Hz |
소재지 |
| RCTA-DO-160G:2010 |
Environmental Conditions and Test Procedure for Airborne Equipment
Section 4.0 Temperature and Altitude [Exception]
4.6.1 Altitude Test
4.6.2 Decompression Test
4.6.3 Overpressure Test
Section 5.0 Temperature Variation
Section 6.0 Humidity
Section 7.0 Operational Shock and Crash Safety
[Exception]
7.3.3 Test Procedure 2 (Sustained)
Section 8.0 Vibration
Section 14.0 Salt Spray |
Temperature:
(-65 ~ 175) ℃
Humidity:
(20 ~ 95) % R.H.
Temperature: 35 ℃
Salt solution
concentration:
5 % NaCl
pH: (6.5 ~ 7.2)
Frequency:
(5 ~ 2 000) Hz
Aceleration:
(9.8 ~ 500) m/s²
Duration:
(5 ~ 20) ms |
소재지 |
| IEC 60068-2-1: 2025 |
Environmental testing -
Part 2-1: Tests - Test A : Cold |
Temperature:
(-65 ~ 5) ℃ |
소재지 |
| IEC 60068-2-11:2021 |
ENVIRONMENTAL TESTING – Part 2-11: Tests – Test Ka: Salt mist |
Temperature: 35 ℃
Salt solution
concentration:
5 % NaCl,
pH: (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경시험-
제2-30부:시험-시험Db와 지침 :
내습 사이클 (12+12h 사이클) |
온도 :
(25 ~ 55) ℃
습도 :
(45 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-27:2008 |
환경시험-
제2부:시험-시험 Ea와 지침 : 충격 |
가속도 :
(50 ~ 500) m/s²
지속시간 :
(5 ~ 30) ms |
소재지 |
| KRS SG 0051-23(R) |
건널목제어유니트(삽입형식)
Railroad Crossing Control Unit(Plug in Type)
[제외항목]
4.2.1 시험의 분류
- 나. 재질시험 |
온도: (-40 ~ 70) ℃
습도: 95 % R.H. 이하
절연내력: 1 500 V 이하.
절연저항: 5 000 MΩ 이하 |
소재지 |
| KRS SG 0038-24(R) |
무절연가청주파수(AF)궤도회로
Non-insulated Audio Frequency Track Circuit
[제외항목]
4.7 종합모의시험 |
온도: (-40 ~ 70) ℃
습도: 95 % R.H. 이하
절연내력:2 000 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| KS C IEC 60068-2-64:2019 |
환경시험-
제2-64부:시험- 시험 Fh :
광대역 불규칙 진동 시험 및 지침 |
Frequency:
(5 ~ 2 000) Hz
Acceleration:
(0.98 ~ 300) m/s² r.m.s |
소재지 |
| MIL-STD-810G w/Change:2014 |
Department of Defense test method standard
Environmental Engineering Considerations and Laboratory Tests
501.6 High Temperature
502.6 Low Temperature
503.6 Temperature Shock
506.6 Rain
[Exception]
ProcedureⅡ-Exaggeraterl
Procedure Ⅲ-Drip
507.6 Humidity
509.6 Salt Fog
514.7 Vibration
[Exception]
ProcedureⅡ-Loose Cargo Transportation
Procedure Ⅲ-Large Assembly Transportation Assembly Cargo
516.7 Shock
[Exception]
Procedure Ⅶ-Pendulum Impact
Procedure Ⅷ-Catapult
Launch/Arrested Landing
528 Mechanical Vibration of Shipboard Material
(Type 1 - Environmental Vibration) |
Temperature:
(-65 ~ 175) ℃ Humidity:
(20 ~ 95) % R.H. Temperature: 35 ℃
Salt solution concentration:
5 % NaCl
pH: (6.5 ~ 7.2) Frequency:
(5 ~ 2000) Hz Acceleration:
(147 ~ 980) m/s² Duration:
(6 ~ 11) ms |
소재지 |
| KS C IEC 60068-2-2:2007 |
환경시험-
제2-2부:시험- 시험 B: 내열성 시험 |
온도 :
(30 ~ 175) ℃ |
소재지 |
| EN 61373:2010 |
Railway applications -
Rolling stock equipment - Shock and vibration tests |
Frequency:
(5 ~ 500) Hz
Aceleration:
(0.37 ~ 144) m/s²
r.m.s Aceleration:
(30 ~ 500) m/s²
Duration:
(6 ~ 30) ms² |
소재지 |
| EN 50155:2021 |
Railway applications - Rolling stock - Electronic equipment
storage test
12.2.3 Cooling test
12.2.4 Dry heat test
12.2.5 Damp heat test,
cyclic
12.2.10 Salt mist test
12.2.11 Vibration, shock
and bump test
12.2.12 Watertightness
test
12.2.14 Low temperature
storage test |
Temperature:
(-40 ~ 85) ℃
Humidity:
(45 ~ 95) %
Salt solution concentration:
Temperature:
35 ℃ 5 % NaCl
pH: (6.5 ~ 7.2)
Frequency:
(5 ~ 250) Hz Acceleration:
(0.37 ~ 300) m/s² r.m.s
IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7, IPX8 Acceleration:
(30 ~ 500) m/s² |
소재지 |
| KRCS C027 06:2020 |
신호부동용정류기 |
온도: (-20 ~ 60) ℃
습도: 90 % R.H. 이하
절연내력: 1 500 V 이하
절연저항: 5 000 MΩ 이하. |
소재지 |
| MIL-STD-810E :1989 |
MILITARY STANDARD ENVIRONMENTAL TEST METHODS AND ENGINEERING GUIDELINES
501.3 High Temperature
502.3 Low Temperature
503.3 Temperature Shock
506.3 Rain
[Exception]
Procedure Ⅱ-Drip
Procedure Ⅲ-Watertightness
507.3 Humidity
509.3 Salt Fig
514.4 Vibration
[Exception]
Procedure Ⅱ-Large assembly transport
Procedure Ⅲ-Loose cargo transport
516.4 Shock
Procedure VI Bench handling
Procedure Ⅶ-Pyrotechnic shock
Procedure Ⅷ-Rail impact
Procedure Ⅸ-Catapult launch/arrested landing |
Temperature:
(-65 ~ 175) ℃
Humidity:
(20 ~ 95) % R.H.
Temperature: 35 ℃
Salt solution concentration:
5 % NaCl,
pH: (6.5 ~ 7.2)
Frequency:
(5 ~ 2 000) ㎐
Acceleration:
(147 ~ 980) ㎨
Duration:
(6 ~ 11) ㎳ |
소재지 |
| IEC 60945:2002 |
Maritime navigation and radio communication equipment and systems. General requirements.
Methods if testing and required test results
7.1 Extreme power supply
8.1 General
8.2 Dry heat
8.3 Damp heat
8.4 Low temperature
8.6.1 Drop on hard surface
8.7 Vibration
8.8 Rain and Sprat(exposed equipment)
8.9 Immersion
8.9.3 Portable equipment*temporary immersion)
8.12 Corrosion |
High Temp.:
(55 ~ 70) ℃
Temp. & Humid.:
40 ℃, 95 %R.H.
Low Temp.:
(-30 ~ -15) ℃
Frequency:
(5 ~ 100) ㎐
Aceleration:
Max 7 m/s²
Salt solution
concentration:
Temperature:
35 ℃ 5 % NaCl,
pH: (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-52:2017 |
환경시험제
2-52부: 시험 Kb :
염수분부, 사이클 (염화소듐 용액)
[제외항목]
9.4.9 시험방법 8 (산성화된 염용액)
온도: (15 ~ 35) ℃
23 ℃, (40 ~ 55) % R.H.
40 ℃, 93 % R.H.
염수농도: 5 % NaCl,
pH : (6.5 ~ 7.2) |
온도:
(15 ~ 35) ℃
23 ℃, (40 ~ 55) % R.H. 40 ℃, 93 % R.H.
염수농도: 5 % NaCl, pH : (6.5 ~ 7.2) |
소재지 |
| KS C IEC 60068-2-57:2013 |
환경 시험 – 제2-57부: 시험 – 시험 Ff:진동 – 시간 이력과 사이비트 방법 |
Frequency:
(5 ~ 2 000) Hz |
소재지 |
| IEC 60529:2013 |
Degrees of protection provided by enclosures (IP Code) |
IP1X to IP6X
IPX1 to IPX9 |
소재지 |
| KS R 9186:2021 |
철도 신호 보안 부품-진동 시험 방법 |
Frequency:
(10 ~ 1 000) Hz
Aceleration:
(4.9 ~ 500) m/s² |
소재지 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험 방법 |
Frequency:
(5 ~ 70) Hz
Aceleration:
(10 ~ 490) m/s² |
소재지 |
| KRS SG 0015-23(R) |
전자연동장치
Electronic Interlocking Device
[제외항목]
4.9 동작 성능시험
4.10 연동시험 |
온도: (-40 ~ 70) ℃
습도: 95 % R.H. 이하.
절연내력: 1 500 V 이하.
절연저항: 5 000 MΩ 이하. |
소재지 |
| IEC 60068-2-14:2023 |
Environmental testing -
Part 2-14: Tests - Test N : Change of temperature
7 Test Na : Rapid change of temperature with prescribed time of transfer
8 Test Nb : Change of temperature with specified rate of change |
Temperature:
(-65 ~ 175) ℃ |
소재지 |
| KRS SG 0055-24(R) |
복선 자동폐색제어장치
Double Track Automatic Block Control Device
[제외항목]
4.2.2 시험방법
- 2) 접점 용량시험 |
온도: (-80 ~ 220) ℃
습도: 95 % R.H. 이하.
절연내력: 2 500 V 이하.
절연저항: 5 000 MΩ 이하 |
소재지 |
| MIL-STD-810F:2000 |
Department of Defense test method standard
Environmental Engineering Considerations and Laboratory Tests
501.4 High Temperature
502.4 Low Temperature
503.4 Temperature Shock
506.4 Rain
[Exception]
ProcedureⅡ-Exaggeraterl
Procedure Ⅲ-Drip
507.4 Humidity
509.4 Salt Fog
514.5 Vibration
[Exception]
ProcedureⅡ - Loose Cargo Transportation
Procedure Ⅲ- Large Assembly Transportation
516.5 Shock
[Exception]
Procedure Ⅶ-Rail Impact
Procedure Ⅷ-Catapult
Launch/Arrested Landing |
Temperature:
(-65 ~ 175) ℃ Humidity:
(20 ~ 95) % R.H Temperature: 35 ℃
Salt solution concentration:
5 % NaCl
pH: (6.5 ~ 7.2) Frequency:
(5 ~ 2 000) Hz Acceleration:
(147 ~ 980) m/s² Duration:
(6 ~ 11) ms |
소재지 |
| MIL-STD-810F:2003 |
Department of Defense test method standard
Environmental Engineering Considerations and Laboratory Tests
501.4 High Temperature
502.4 Low Temperature
503.4 Temperature Shock
506.4 Rain
[Exception]
ProcedureⅡ-Exaggeraterl
Procedure Ⅲ-Drip
507.4 Humidity
509.4 Salt Fog
514.5 Vibration
[Exception]
ProcedureⅡ-Loose Cargo Transportation
Procedure Ⅲ-Large Assembly Transportation
516.5 Shock
[Exception]
Procedure Ⅶ-Rail Impact
Procedure Ⅷ-Catapult
Launch/Arrested Landing |
Temperature:
(-65 ~ 175) ℃ Humidity:
(20 ~ 95) % R.H. Temperature: 35 ℃
Salt solution concentration:
5 % NaCl
pH: (6.5 ~ 7.2) Frequency:
(5 ~ 2 000) Hz Acceleration:
(147 ~ 980) m/s² Duration:
(6 ~ 11) ms |
소재지 |
| KS C IEC 61373:2010 |
철도 적용 – 철도차량 장치 – 충격 및 진동 시험
[제외항목]
10 충격시험조건 시험 엄격도 범주 3 차축
설치품 |
주파수: (5 ~ 500) ㎐
가속도: (0.37 ~ 300) ㎨ r.m.s
가속도: (30 ~ 500) ㎨
지속시간: (5 ~ 30) ms |
소재지 |
| KS C IEC 60068-2-43:2003 |
기본 환경 시험 절차
제 2-43부: 시험 -시험 Kd: 접점 및 접속부에 대한 황화수소 시험 |
온도:
25 ℃
습도:
70 ~ 80 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz to 230 MHz |
소재지 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz to 6 GHz |
소재지 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 MHz to 6 GHz |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS : 150 kHz to 230 MHz |
소재지 |
| IEC 61000-6-4:2006/AMD1:2010 |
Electromagnetic compatibility
Part 6-4: Generic standard - Emission standard
for industrial environments |
RE: 30 ㎒ to 6 ㎓
CE: 150 ㎑ to 30 ㎒ |
소재지 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE : 30 MHz to 6 GHz
CE : 150 kHz to 30 MHz
Disturbance Voltage : 9 kHz to 2.15 GHz |
소재지 |
| KS C IEC 60533:2003 |
선박용 전기 설비-전기 자기 적합성 |
RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : Max. 100 %
LFCS : 50 ㎐ ~ 10 kHz |
소재지 |
| ▶ 소프트웨어 |
| EN 18031-1:2024 |
Common security requirements for radio equipment- Part 1 : Internet connected radio equipment |
- |
소재지 |
| EN 18031-2:2024 |
Common security requirements for radio equipment- Part 2 : radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment |
- |
소재지 |
| EN 18031-3:2024 |
Common security requirements for radio equipment- Part 3 : Internet connected radio equipment processing virtual money or monetary value |
- |
소재지 |
| ESTI EN 303 645 V3.1.3(2024-09) |
Cyber Security for Consumer Internet of Things:Baseline Requirements 5. Cyber security provisions for consumer IoT |
- |
소재지 |
| IEC 62443-3-3:2013 |
Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels |
- |
소재지 |
| IEC 62443-4-1:2018 |
Security for industrial automation and control systems – Part 4-1: Secure product development lifecycle requirements |
- |
소재지 |
| IEC 62443-4-2:2019 |
Security for industrial automation and control systems – Part 4-2: Technical security requirements for IACS components |
- |
소재지 |
| IEC TR 60601-4-5:2021 |
Medical electrical equipment- Part 4-5: Guidance and interpretation - Safety - related technical security specifications |
- |
소재지 |
| IEC 81001-5-1:2021 |
Health software and health IT systems safety, effectiveness and security Part 5-1: Security — Activities in the product life cycle |
- |
소재지 |
| 안내서-0995-05 |
의료기기의 사이버보안 허가·심사 가이드라인 (민원인 안내서) |
- |
소재지 |
| ISO/SAE 21434:2021 |
Road vehicles – Cybersecurity engineering |
- |
소재지 |
| ▶ 전자기적합성 |
| IEEE . Std 519-2022 |
IEEE Standard for Harmonic Control in Electric Power Systems |
전압 & 전류 고조파 : 50차수 |
소재지 |
| CISPR 16-1-4:2025 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
- |
소재지 |
| EN IEC 55011:2025 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
RE: 9 ㎑ to 18 ㎓
CE : 9 ㎑ to 30 ㎒ |
소재지 |
| 고용노동부고시 제2025-129호(2025.12.30) |
안전인증대상기계 등이 아닌 유해ㆍ위험기계등의 안전인증 규정 |
RE: 9 ㎑ to 6 ㎓
CE: 9 ㎑ to 30 ㎒
ESD: ± 8 ㎸
RS: 80 ㎒ to 2.7 ㎓
EFT: ± 2 ㎸
SURGE: ± 2 ㎸
CS: 150 ㎑ to 80 ㎒
V-DIP: (0 to 100) % |
소재지 |
| EN IEC 61000-3-2:2019+A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions(equipment input current≤16 A per phase) |
I ≤ 16 A |
소재지 |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 80 ㎒ to 6 ㎓ |
소재지 |
| KS C 9610-4-4:2017 |
전자파적합성(EMC) — 제4-4부: 시험 및 측정기술 — 전기적 빠른 과도현상, 버스트 내성 시험 |
EFT : ±4 ㎸ |
소재지 |
| KS C 9610-4-5:2017 |
전자파적합성(EMC) — 제4-5부: 시험 및 측정기술 — 서지 내성 시험 |
SURGE : ±6 Kv |
소재지 |
| KS C 9610-4-6:2017 |
전자파적합성(EMC) —제4-6부: 시험및측정기술—전도성 RF 전자기장내성시험 |
CS : 150 kHz ~ 230 MHz |
소재지 |
| KS C 9610-4-11:2017 |
전자파적합성(EMC) — 제4-11부: 시험 및 측정기술 — 전압 강하, 순간 정전, 전압 변동 내성 시험 |
≤ 16 A, 50 Hz / 60 Hz |
소재지 |
| EN 61000-4-5:2014 |
Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test |
SURGE : ±6 kV |
소재지 |
| EN 61000-4-11:2004 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
≤ 16 A, 50 ㎐ / 60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 62368-1:2025 |
오디오/비디오 및 정보통신기술기기 -
제1부: 안전 요구 사항
[제외항목]
5.4.1.10 KS M ISO 306의 B50 연화온도(Vicat) 시험
5.4.4 맨드릴(Mandrel) 시험
5.6.4.1 과전류 보호장치 의 결정과 그 회로 (부속서 R)
10 방사 (레이저 (IEC 60525-2, IEC 60825-12), X-ray, 재질에 대한 UV 방사선의 영향 (부속서 C), 음압)
부속서 C 자외선 (UV Radiation)
부속서 G.5.3.4 FIW 시험
부속서 G.7 주전원 코드
부속서 G.15 수압 시험
부속서 G.15 튜빙 및 피팅 호환성 시험
부속서 J 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7 수소 가스 농도
부속서 M.8.2 외부 스파크 원으로부터 내부 점화에 대한 보호 – 스파크 시험
부속서 R 제한 단락 회로 시험
부속서 S S.3.2의 디젤 연료 오일 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y.3 부식에 대한 내성, 수인성 오염 물질
부속서 Y.3.3 수포화 이산화황 시험
부속서 Y.4.3 인장 강도 및 연신율 시험
부속서 Y.4.4 압축 시험
부속서 Y.4.5 내유성 |
입력 전압: 500 V 이하
입력 주파수: (50 / 60) Hz
누설 전류: 10 mA 이하
온도: 200 ℃ 이하
접지 연속성: 6 V, 60 A
내전압: 10 kV
절연저항: 5 000 MΩ 이하
습도: 95 % R.H. 이하 |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 893 V2.2.1 |
5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum
[Exception]
Radiation Measurement |
Frequency bands : 5 150 MHz to 5 350 MHz / 5 470 MHz to 5 725 MHz |
소재지 |
| ETSI EN 300 220-2 V3.3.1 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment
[Exception]
Radiation Measurement |
Frequency range : 25 MHz to 1 GHz |
소재지 |
