| ▶ 금속 및 관련제품 |
ASME BPVC SEC.II
PART-A SA370-2025 |
ASME Boiler &Pressure Vessel Code Ⅱ Materials
Part A Ferrous Material Specifications
SA370 TEST METHODS AND DEFINITIONS FOR MECHANICAL TESTING OF STEEL PRODUCTS
-TENSION TEST : Section 7 to 14
- BEND TEST : Section 15
- HARDNESS TEST : Section 16 to 18
- CHARPY IMPACT TESTING : Section 20 to 29
-A2.2 Tension Test
-A2.5.1.1 Flattening Test
-A2.5.1.2 Reverse Flattening Test
-A2.5.1.4 Flange Test
-A2.5.1.5 Flaring Test
-A2.5.1.6 Bend Test
-A2.5.1.7 Transverse Guided Bend Test of Welds |
-Tension Test
Load : (2 ~ 930) kN,
Reduction of area : (1 ~ 100) %,
Elongation : (1 ~ 80) %
-Hardness Test
Brinell(Load) : (4 903 ~ 29 420) N,
Rockwell(Scale) : (40 ~ 95) HRBW, (20 ~ 65) HRC
-Bend Test
Load : Max. 930 kN
-Charpy Impact Testing
Absorbed energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155) ℃, -196 ℃,
Lateral Expansion : (0.01 ~ 5) mm,
Percent Shear Fracture : Max. 100 %
-Flattening/Flange/Flaring Test
Load : Max. 930 kN |
소재지 |
| ASME BPVC SEC.IX-2025 |
ASME Boiler & Pressure Vessel Code IX
Qualification Standard for Welding, Brazing, and Fusing, Procedures; Welders; Brazers; and Welding, Brazing, and Fusing Operators
PART QW WELDING ARTICLE I
WELDING GENERAL REQUIREMENTS
-QW-150 TENSION TESTS
-QW-160 GUIDED-BEND TESTS
-QW-170 TOUGHNESS TESTS
-QW-182 FRCTURE TESTS
-QW-470 ETCHING-PROCESSES AND REAGENTS
-QW-472 FOR FERROUS METALS
-QW-473 FOR NONFFRROUS METALS |
-QW-150 Tension Test
Load : (2 ~ 930) kN
-QW-160 Guided-bend Test
Load : Max. 930 kN
-QW-171 Notch Toughness Test(Charpy)
Absorbed Energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155) ℃, -196 ℃,
Lateral Expansion : (0.01 ~ 5) mm,
Percent Shear Fracture : Max. 100 %
-QW-182 Fracture Test
Load : Max. 930 kN |
소재지 |
| ASTM A262-15(2021) |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
PRACTICE A — OXALIC ACID ETCH TEST FOR CLASSIFICATION OF ETCH STRUCTURES OF AUSTENITIC STAINLESS STEELS
PRACTICE B — FERRIC SULFATE-SULFURIC ACID TEST FOR DETECTING SUSCEPTIBILITY TO INTERGRANULAR ATTACK IN AUSTENITIC STAINLESS STEELS
PRACTICE C — NITRIC ACID TEST FOR DETECTING SUSCEPTIBILITY TO INTERGRANULAR ATTACK IN AUSTENITIC STAINLESS STEELS
PRACTICE E — COPPER COPPER SULFATE-16 % SULFURIC ACID TEST FOR DETECTING SUSCEPTIBILITY TO INTERGRANULAR ATTACK IN AUSTENITIC STAINLESS STEELS |
- |
소재지 |
| ASTM A370-24a |
Standard Test Methods and Definitions for Mechanical Testing of Steel Products.
-Tension Test : Section 7 to 14
-Bend Test : Section 15
-Hardness Test : Section 16 to 18
-Charpy Impact Testing : Section 20 to 30
-A2.2 Tension Test
-A2.5.1.1 Flattening Test
-A2.5.1.2 Reverse Flattening Test
-A2.5.1.4 Flange Test
-A2.5.1.5 Flaring Test
-A2.5.1.6 Bend Test
-A2.5.1.7 Transverse Guided Bend Test of Welds |
-Tension Test
Load : (2 ~ 930) kN,
Reduction of area : (1 ~ 100) %,
Elongation : (1 ~ 80) %
-Hardness Test
Brinell(Load) : (4 903 ~ 29 420) N,
Rockwell(Scale) : (40 ~ 95) HRBW, (20 ~ 65) HRC
-Bend Test
Load : Max. 930 kN
-Charpy Impact Testing
Absorbed energy : Max. 490 J ,
Test Temperature : (Room Temperature ~ -155) ℃, -196 ℃,
Lateral Expansion : (0.01 ~ 5) mm,
Percent Shear Fracture : Max. 100 %
-Flattening/Flange/FlaringTest
Load : Max. 930 kN |
소재지 |
| ASTM A770/A770M-03(2025) |
Standard Specification for Trough- Thickness Tension Testing of steel plate for special Applications |
Load : (2 ~ 930) kN,
Reduction of area : (1 ~ 100) % |
소재지 |
| ASTM A923-25 |
Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
TEST METHOD A — SODIUM HYDROXIDE ETCH TEST FOR CLASSIFICATION OF ETCH STRUCTURES OF DUPLEX STAINLESS STEELS
TEST METHOD B — CHARPY IMPACT TEST FOR CLASSIFICATION OF STRUCTURES OF DUPLEX STAINLESS STEELS
TEST METHOD C — FERRIC CHLORIDE CORROSION TEST FOR CLASSIFICATION OF STRUCTURES OF DUPLEX STAINLESS STEELS |
TEST METHOD B Charpy Impact Test Absorb Energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155 ℃), -196 ℃ |
소재지 |
| ASTM E10-23 |
Standard Test Method for Brinell Hardness of Metallic Materials |
Load : (4 903 ~ 29 420) N |
소재지 |
| ASTM E112-25 |
Standard Test Methods for Determining Average Grain Size |
- |
소재지 |
| ASTM E18-25 |
Standard Test Methods for Rockwell Hardness of Metallic Materials |
Scale : (40 ~ 95) HRBW, (20 ~ 65) HRC |
소재지 |
| ASTM E190-21 |
Standard Test Method for Guided Bend Test for Ductility of Welds |
Load : Max. 930 kN |
소재지 |
| ASTM E23-25 |
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
Absorbed Energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155) ℃, –196 ℃,
Lateral Expansion : (0.01 ~ 5) mm,
Percent Shear Fracture : Max. 100 % |
소재지 |
| ASTM E290-22 |
Standard Test Methods for Bend Testing of Material for Ductility |
Load : Max. 930 kN |
소재지 |
| ASTM E340-23 |
Standard Practice for Macroetching Metals and Alloys |
- |
소재지 |
| ASTM E381-22 |
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings |
- |
소재지 |
| ASTM E407-23 |
Standard Practice for Microetching Metals and Alloys |
- |
소재지 |
| ASTM E562-19e1 |
Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count |
- |
소재지 |
| ASTM E8/E8M-25 |
Standard Test Methods for Tension Testing of Metallic Materials |
Load : (2 ~ 930) kN,
Reduction of Area : (1 ~ 100) %,
Elongation : (1 ~ 80) % |
소재지 |
| ASTM E92-23 |
Standard Test Method for Vickers Hardness and Knoop Hardness of Metallic Materials |
Load : (49,03 ~ 98,07) N
(Except for Knoop Hardness Test) |
소재지 |
| ASTM G28-24 |
Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
METHOD A—Ferric Sulfate—Sulfuric Acid Test |
- |
소재지 |
| ASTM G48-25 |
Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
8. Method A—Ferric Chloride Pitting Test |
- |
소재지 |
| AWS D1.1/D1.1M:2025 |
Structural Welding Code - Steel
-6.10.3 Mechanical Testing - Bend Test, Tension Test
-6.10.4 Macroetch Test
-6.QUALIFICATION PartD Requirements for CVN Testing
-6.23.4 Fillet Weld Break Test |
6.10.3 Mechanical Testing
-Bend Test
Load : Max. 930 kN
-Tension Test
Load : Max. 930 kN,
Reduction of Area : (1 ~ 100) %,
Elongation : (1 ~ 80) %
6.PartD CVN Testing
Absorbed Energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155) ℃, -196 ℃,
Lateral Expansion : (0.01 ~ 5) mm,
Percent Shear Fracture : Max. 100 %
6.23.4 Fillet Weld Break Test
Load : Max. 930 kN |
소재지 |
| ISO 148-1:2016 |
Metallic materials - Charpy pendulum impact test - Part 1 : Test method |
Absorbed Energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155) ℃, –196 ℃,
Lateral Expansion : (0.01~5) mm,
Percent Shear Fracture : Max. 100 % |
소재지 |
| ISO 17639:2022 |
Destructive tests on welds in metallic materials – Macroscopic and microscopic examination of welds |
- |
소재지 |
| ISO 3651-2:1998 |
Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels-- Corrosion test in media containing sulfuric acid |
- |
소재지 |
| ISO 4136:2022 |
Destructive tests on welds in metallic materials - Transverse tensile test |
Load : (2 ~ 930) kN |
소재지 |
| ISO 5173:2023 |
Destructive tests on welds in metallic materials - Bend tests |
Load : Max. 930 kN |
소재지 |
| ISO 6506-1:2014 |
Metallic materials - Brinell hardness test - Part 1 : Test method |
Load : (4 903 ~ 29 420) N |
소재지 |
| ISO 6507-1:2023 |
Metallic Materials - Vickers hardness test - Part 1 : Test method |
Load : (49,03 ~ 98,07) N |
소재지 |
| ISO 6508-1:2023 |
Metallic materials - Rockwell hardness test - Part 1 : Test method |
Scale : (32 ~ 95) HRBW, (20 ~ 70) HRC |
소재지 |
| ISO 6892-1:2019 |
Metallic materials - Tensile testing - Part 1 : Method of test at room temperature |
Load : (2 ~ 930) kN,
Reduction of Area : (1 ~ 100) %,
Elongation : (1 ~ 80) % |
소재지 |
| ISO 7438:2020 |
Metallic materials - Bend test |
Load : Max. 930 kN |
소재지 |
| ISO 9017:2017 |
Destructive tests on welds in metallic materials - Fracture test |
Load : Max. 930 kN |
소재지 |
| JIS G 3454:2026 |
Carbon steel pipes for pressure service
8.2 Flattening Test |
Load : Max. 930 kN |
소재지 |
| JIS G 3459:2021 |
Stainless steel pipes
13.2.4 Flattening Test |
Load : Max. 930 kN |
소재지 |
| JIS G 3461:2023 |
Carbon steel tubes for boiler and heat exchanger
6.2 Flattening Test
6.3 Flaring Test |
Load : Max. 930 kN |
소재지 |
| JIS G 3463:2023 |
Stainless steel tubes for boiler and heat exchanger
7.2 Flattening Test
7.3 Flaring Test |
Load : Max. 930 kN |
소재지 |
| JIS Z 2241:2022/AMENDMENT1:2023 |
Metallic materials-Tensile testing-Method of test at room temperature |
Load : (2 ~ 930) kN,
Reduction of Area : (1 ~ 100) %,
Elongation : (1 ~ 80) % |
소재지 |
| JIS Z 2242:2023 |
Method for Charpy pendulum impact test of metallic materials |
Absorbed Energy : Max. 490 J,
Test Temperature : (Room Temperature ~ -155) ℃, -196 ℃,
Lateral Expansion : (0.01 ~ 5) mm,
Percent Shear Fracture : Max. 100 % |
소재지 |
| JIS Z 2243-1:2018 |
Brinell hardness test - Part 1:Test method |
Load : (4 903 ~ 29 420) N |
소재지 |
| JIS Z 2244-1:2024 |
Vickers hardness test-Part 1: Test method |
Load : (49,03 ~ 98,07) N |
소재지 |
| JIS Z 2245:2021 |
Rockwell hardness test - Test method |
Scale : (32 ~ 95) HRBW, (20 ~ 70) HRC |
소재지 |
| JIS Z 2248:2022/AMENDMENT1:2022R |
Metallic materials - Bend test |
Load : Max. 930 kN |
소재지 |
| KS B 0802:2003 |
금속 재료 인장 시험 방법 |
시험하중 : (2 ~ 930) kN,
단면수축율 (1 ~ 100) %,
연신율 (1 ~ 80) % |
소재지 |
| KS B 0804:2001 |
금속재료 굽힘 시험방법 |
시험하중 : Max. 930 kN |
소재지 |
| KS B 0805:2000 |
금속 재료의 브리넬 경도 시험 방법 |
시험하중 : (4 903 ~ 29 420) N |
소재지 |
| KS B 0806:2000 |
금속 재료의 로크웰 경도 시험 방법 |
스케일 : (32 ~ 95) HRBW, (20 ~ 70) HRC |
소재지 |
| KS B 0810:2003 |
금속 재료 충격 시험 방법 |
흡수에너지 : Max. 490 J,
시험온도 : (상온 ~ -155) ℃, -196 ℃,
가로변형량 : (0.01 ~ 5) mm,
파면율 : Max. 100 % |
소재지 |
| KS B 0811:2003 |
금속 재료의 비커스 경도 시험 방법 |
시험하중 : (49,03 ~ 98,07) N |
소재지 |
| KS B ISO 4136:2022 |
금속재 용접부의 파괴 시험 - 가로방향 인장 시험 |
시험하중 : (2 ~ 930) kN |
소재지 |
| KS B ISO 5173:2023 |
금속 재료 용접부의 파괴 시험 - 굽힘 시험 |
시험하중 : Max. 930 kN |
소재지 |
| KS D 0205:2002 |
강의 페라이트 및 오스테 나이트 결정 입도 시험법 (현미경관찰법) |
- |
소재지 |
| KS D 0219:2020 |
스테인리스강의 염화제 2철 부식 시험 방법 |
- |
소재지 |
| ▶ 철강 |
| ASTM E1086-22 |
Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry |
C : (0.010 3 ~ 0.225) %
Si : (0.039 ~ 0.9) %
Mn : (0.052 ~ 2.0) %
P : (0.005 3 ~ 0.06) %
S : (0.003 ~ 0.051) %
Cr : (17.0 ~ 23.0) %
Ni : (7.5 ~ 13.0) %
Mo : (0.014 ~ 3.0) %
Cu : (0.01 ~ 0.3) % |
소재지 |
| ASTM E415-21 |
Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
C : (0.02 ~ 0.97) %
Si : (0.02 ~ 1.54) %
Mn : (0.03 ~ 1.912) %
P : (0.006 ~ 0.085) %
S : (0.001 ~ 0.055) %
Cr : (0.007 ~ 8.14) %
Ni : (0.006 ~ 5.0) %
Mo : (0.007 ~ 1.3) %
Cu : (0.006 ~ 0.5) %
V : (0.003 ~ 0.3) %
Ti : (0.001 ~ 0.2) %
Al : (0.006 ~ 0.093) %
Nb : (0.003 ~ 0.12) %
Sn : (0.005 ~ 0.047 9) %
Zr : (0.01 ~ 0.05) %
B : (0.000 4 ~ 0.005 3) %
Sb : (0.006 ~ 0.027) %
Co : (0.006 ~ 0.15) %
As : (0.003 ~ 0.053 9) % |
소재지 |
| KS D 1652:2022 |
철 및 강 - 스파크 방전 원자 방출 분광 분석 방법 |
C : (0.001 ~ 3.68) %
Si : (0.006 5 ~ 3.19) %
Mn : (0.003 ~ 22.08) %
P : (0.001 1 ~ 0.121) %
S : (0.000 3 ~ 0.329) %
Cr : (0.002 ~ 27.9) %
Ni : (0.002 ~ 36.054) %
Mo : (0.003 ~ 6.07) %
Cu : (0.001 ~ 3.35) %
V : (0.001 ~ 1.82) %
Ti : (0.000 5 ~ 0.4) %
Al : (0.002 4 ~ 1.03) %
Nb : (0.001 ~ 0.99) %
Pb : (0.001 ~ 0.024) %
Sn : (0.001 ~ 0.047 9) %
W : (0.01 ~ 6.28) %
Zr : (0.001 2 ~ 0.069) %
B : (0.000 13 ~ 0.065) %
Sb : (0.008 ~ 0.034) %
Co : (0.001 2 ~ 1.55) %
As : (0.001 ~ 0.053 9) %
N : (0.001 ~ 0.15)% |
소재지 |
