| ▶ 전기재료 및 부품 |
| CTIA Battery Life Test Plan Version 1.2 |
CTIA Battery Life Test Plan |
Temperature : (-40 ~ 150) °C |
소재지-2 |
| KS C IEC 62133-2:2021 |
알칼리 또는 기타 비산성 전해질을 포함하는 이차전지 셀 및 전지 – 휴대기기용 밀폐식 이차전지 셀 및 이로 구성된 전지의 안전 요구사항 – 제2부: 리튬 시스템
[제외항목]
7.3.9 설계 평가 – 강제 내부 단락 시험(셀에만 적용) |
온도 : (-20 ~ 130) °C
힘 : Max 13 kN
진동 주파수 : (7 ~ 200) Hz
저항 : (80 ± 20) mΩ |
소재지-2 |
| KS C IEC 62133-2:2017 |
알칼리 또는 기타 비산성 전해질을 포함하는 이차 단전지 및 전지 – 휴대기기용 밀폐 이차 단전지 및 이로 구성된 전지의 안전 요구사항 – 제2부: 리튬 시스템
[제외항목]
7.3.9 설계 평가 – 강제 내부 단락 시험(단전지에만 적용) |
온도 : (-20 ~ 130) °C
힘 : Max 13 kN
진동 주파수 : (7 ~ 200) Hz
저항 : (80 ± 20) mΩ |
소재지-2 |
| KC 62619:2019 |
산업용 리튬이차전지 안전
[제외항목]
7.3.2 내부단락 시험(단전지)
7.3.3 열 폭주 전이 시험(전지시스템) |
온도 : (-20 ~ 130) °C
전압 : (0 ~ 60) V
전류 : (0 ~ 80) A
저항 : (30 ± 10) mΩ |
소재지-2 |
| KC 62133-2:2025 |
휴대기기용 밀폐 리튬이차전지 안전
[제외항목]
7.3.9 설계 평가 — 강제 내부 단락 시험(단전지에만 적용) |
온도 : (-20 ~ 130) °C
힘 : Max 13 kN
진동 주파수 : (7 ~ 200) Hz
저항 : (80 ± 20) mΩ |
소재지-2 |
| IEC 62133-2:2017/AMD1:2021 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications – Part 2: Lithium systems
[Exception]
7.3.9 Design evaluation – Forced internal short-circuit (cells) |
Temperature : (-20 ~ 130) °C
Force : Max 13 kN
Vibration Frequency : (7 ~ 200) Hz
Resistance : (80 ± 20) mΩ |
소재지-2 |
| IEC 62133-2:2017 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications – Part 2: Lithium systems
[Exception]
7.3.9 Design evaluation – Forced internal short-circuit (cells) |
Temperature : (-20 ~ 130) °C
Force : Max 13 kN
Vibration Frequency : (7 ~ 200) Hz
Resistance : (80 ± 20) mΩ |
소재지-2 |
| IEC 62133:2012 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
[Exception]
8.3.9 Design evaluation – Forced internal short circuit (cells) |
Temperature : (-20 ~ 130) °C
Voltage : (0 ~ 60) V
Current : (0 ~ 80) A
Resistance : (80 ± 20) mΩ |
소재지-2 |
| IEC 61960-3:2017 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and for batteries for portable applications – Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them |
Temperature : (-20 ~ 40) °C
Voltage : (0 ~ 60) V
Current : (0 ~ 80) A
ESD : 8 kV |
소재지-2 |
| IEC 61960:2011 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes – Secondary lithium cells and for batteries for portable applications |
Temperature : (-20 ~ 40) °C
Voltage : (0 ~ 60) V
Current : (0 ~ 80) A
ESD : 8 kV |
소재지-2 |
| IEC 60695-2-10:2013 |
Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure |
Temperature : (0 ~ 1 000) °C |
소재지-2 |
| IEC 60695-11-5:2016 |
Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance |
Flame length : (12 ± 1) mm |
소재지-2 |
| IEC 60695-10-2:2014 |
Fire hazard testing – Part 10-2: Abnormal heat – Ball pressure test method |
Temperature : (0 ~ 200) °C
Strength : (20 ± 0.2) N |
소재지-2 |
| CTIA CRD Version 3.2.1 |
CTIA Certification Requirements for Battery System Compliance to IEEE 1725
[Exception]
Section 4 Cell Validation |
Temperature : (-40 ~ 150) °C
Force : Max 250 N
Resistance : (80 ± 20) mΩ |
소재지-2 |
| CTIA CRD Version 1.12.2 |
CTIA Certification Requirements for Battery System Compliance to IEEE 1625
[Exception]
Section 4 Cell Considerations |
Temperature : (-40 ~ 150) °C
Force : Max 250 N
Resistance : (80 ± 20) mΩ |
소재지-2 |
| ▶ 계측기기 |
| EN IEC 61010-2-101:2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-101:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| EN IEC 61010-2-091:2021 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-091:2019 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| EN IEC 61010-2-081:2020 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-081:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| EN IEC 61010-2-051:2021 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-051:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| EN IEC 61010-2-030:2021 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits.
[Exception]
101.2 Current measuring circuits |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-030:2017 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for [equipment having] testing and/or measuring circuits.
[Exception]
101.2 Current measuring circuits |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-030:2023 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for [equipment having] testing and/or measuring circuits.
[Exception]
101.2 Current measuring circuits |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| EN IEC 61010-2-010:2020 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of material |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-2-010:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| EN 61010-1:2010+A1:2019 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[Exception]
6.7.1.3 CREEPAGE DISTANCES -The test for tracking index
12.2.1 Ionizing radiation
12.3 Optical radiation
12.4 Microwave Radiation
12.5.2 Ultrasonic pressure
12.6 Laser sources
13.2.3 Implosion of cathode ray tubes |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| IEC 61010-1:2010+A1:2016 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
[Exception]
6.7.1.3 CREEPAGE DISTANCES -The test for tracking index
12.2.1 Ionizing radiation
12.3 Optical radiation
12.4 Microwave Radiation
12.5.2 Ultrasonic pressure
12.6 Laser sources
13.2.3 Implosion of cathode ray tubes |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 500 mA
Temperature: Max. 200 °C
Earth Continuity: 50 A (60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV (60 Hz & DC) , 100 mA (60 Hz)
Humidity & Temperature : (-10 ∼ 80) °C, (20 ~ 96) % R.H.
Sound level: 90 dBA
Applied force: 1000 N
Measuring capacitance: 100 uF |
소재지-2 |
| ▶ 가정용 전기기기 |
| IEC 60335-1:2020 |
Household and similar electrical appliances – Safety –Part 1: General requirements
[Exception]
6.2 Water test
8.1.1, 8.1.2, 8.1.3, 8.2 :Protection against access to live parts
15.1 Moisture resistance
19.9 Running overload test
19.11.4 Switch (offmode) test
22.32 Construction
22.57 Non-metallic materials exposure to UV-C
23.3 Internal wiring
24 Components
25.14 Supply connection and external flexible cords
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annex B Battery-operated appliances, separable batteries and detachable batteries for battery-operated appliances
Annex F Capacitor
Annex H Switch
Annex J Coated printed circuit boards
Annex R Software evaluation
Annex T UV-C radiation effect on non-metallic materials
Annex U Appliances intended for remote communication through public networks |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60065:2014 |
Audio, video and similar electronic apparatus – Safety requirements
[Exception]
6.2 Laser radiation
7. Three phase voltage supply system
12.3 Remote control devices held in hand
13.4 Comparative tracking index
13.6 Jointed insulation Enclosed and sealed parts
14.2 Capacitors and RC-units
14.6 Switches
16. External Flexible cords
18. Mechanical strength of picture tubes and protection against effects of implosion
Annex A Splash treatment
Annex H Insulating Winding wires |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 42 °C, 95 % R.H. |
소재지-2 |
| EN IEC 62368-1:2020+A11:2020 |
Audio/video, Information and communication technology equipment –
Part 1: General requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.4.6.5 Mandrel test
5.4.1.4 / B.2.5 / Three phase voltage systems
10 Radiations
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.7 Mains supply cords
Annex G.9 Integrated circuit(IC) current limiters
Annex G.13.6 Coated printed boards
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex P.4 Metallized coatings and adhesives securing parts
Annex R Limited short-circuit test
Annex S.3 Flammability test for the bottom of a fire enclosure
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| EN IEC 62368-3:2020 |
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| EN 62368-1:2014+A11:2017 |
Audio/video, Information and communication technology equipment –
Part 1: General requirements
[Exception]
5.4.4.6.5 Mandrel test
5.4.1.4 Three phase voltage systems
Annex R Limited short-circuit test
10 Radiations
Annex G.7 Mains supply cords
Annex G.9 Integrated circuit(IC) current limiters
Annex G.13.6 Coated printed boards
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3 Flammability test for the bottom of a fire enclosure
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
EN 60950-1:2006
+A11:2009
+A1:2010
+A12:2011
+A2:2013 |
Information technology equipment – Safety –
Part 1: General requirements
[Exception]
2.10.4 Comparative tracking index
2.10.5.4 Partial discharge test
2.10.7 Enclosed and sealed parts
2.10.8.4 Abrasion resistance test
2.10.9 Thermal cycling and thermal ageing
3.2.5.1 AC Power Supply Cords
4.2.8 Cathode ray tube
4.3.12 Flammable liquids
4.3.13.3 Effect of UV radiation on materials
4.3.13.4 Human exposure to UV radiation
4.3.13.5 Laser radiation
4.5 Three phase voltage supply system
4.6.2 Bottom of fire enclosure
Annex AA Mandrel test
Annex T Guidance on protection against ingress of water |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| EN 60335-2-6:2015+A1:2020+A11:2020 |
Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
5.4 Appliances that also use gas are supplied with gas at the appropriate rated pressure.
24 Components
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
EN 60335-2-25:2012
+A1:2015+A2:2016 |
Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
[Exception]
11.2 A ceiling is placed over the appliance at the minimum height stated in the instructions.
The ceiling has a depth of 300 mm from the back wall of the test corner and a length at least 150 mm in excess of the width of the appliance.
24 Components
25.14 For temperature-sensing probes, the total number of flexings is 5 000. Probes with circularsection cords are turned through 90° after 2 500 flexings. |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity:
30 °C, 96 % R.H. |
소재지-2 |
EN 60335-2-24:2010
+A1:2019+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
[Exception]
22 Test for flammable refrigerants |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity:
30 °C, 96 % R.H. |
소재지-2 |
EN 60335-2-23:2003
+A1:2008
+A11:2010
+A2:2015 |
Household and similar electrical appliances – Safety –Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
25.101 Swivel connection test |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity:
30 °C, 96 % R.H. |
소재지-2 |
EN 60335-2-2:2010
+A11:2012+A1:2013 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
21 Mechanical strength |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
EN 60335-1:2012
+A11:2014
+A13:2017
+A14:2019
+A1:2019
+A2:2019+A15:2021 |
Household and similar electrical appliances – Safety – Part 1: General requirements
[Exception]
8.1.1, 8.1.2, 8.1.3, 8.2 :Protection against access to live parts
15.1 Moisture resistance
22.32 Construction
23.3 Internal wiring
24 Components
25.14 Supply connection and external flexible cords
Annex B Appliance power ed by rechargeable battery
Annex F Capacitor
Annex H Switch
Annex J Coated printed circuit boards
Annex R Software evaluation |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity:
30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-1:2010
+A1:2013+A2:2016 |
Household and similar electrical appliances – Safety – Part 1: General requirements
[Exception]
8.1.1, 8.1.2, 8.1.3, 8.2 :Protection against access to live parts
15.1 Moisture resistance
22.32 Construction
23.3 Internal wiring
24 Components
25.14 Supply connection and external flexible cords
Annex B Appliance power ed by rechargeable battery
Annex F Capacitor
Annex H Switch
Annex J Coated printed circuit boards
Annex R Software evaluation |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-11:2008
+A1:2012+A2:2015 |
Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-11:2019 |
Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-13:2009
+A1:2016 |
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-15:2012
+A1:2016+A2:2018 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
24 Components |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-2:2009
+A1:2012+A2:2016 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
21 Mechanical strength |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-2:2019 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
21 Mechanical strength |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-21:2012
+A1:2018 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-21:2022 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-23:2016
+A1:2019 |
Household and similar electrical appliances – Safety –Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
25.101 Swivel connection test |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-24:2020 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
[Exception]
22 Test for flammable refrigerants |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-24:2010+A1:2012+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
[Exception]
22 Test for flammable refrigerants |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-24:2025 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
[Exception]
22 Test for flammable refrigerants |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
EN 60065:2014
+A11:2017 |
Audio, video and similar electronic apparatus – Safety requirements
[Exception]
6.2 Laser radiation
7. Three phase voltage supply system
12.3 Remote control devices held in hand
13.4 Comparative tracking index
13.6 Jointed insulation Enclosed and sealed parts
14.2 Capacitors and RC-units
14.6 Switches
16. External Flexible cords
18. Mechanical strength of picture tubes and protection against effects of implosion
Annex A Splash treatment
Annex H Insulating Winding wires
Annex Z1 Protection against excessive sound pressure from personal music players |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity:
42 °C, 95 % R.H. |
소재지-2 |
| KS C IEC 60950-1:2014 |
정보기술 기기의 안전성－제1부：일반 요구사항
[Exception]
2.10.4 비교 트레킹지수
2.10.6 코팅된 인쇄회로기판
3.2.5.1 교류주전원 코드
4.2.8 브라운관
4.3.12 가연성 액체
4.3.13.3 재질에 대한 자외선 영향
4.3.13.4 자외선의 인체 노출
4.3.13.5 레이저(LED포함)
4.5 3상전원 시스템
4.6.2 방화용 엔클로우져의 밑면
8 전자파 장해 및 전자파 내성
부속서 T 방수에 관한 지침
부속서 U 중간 절연 없는 절연 권선 전선
부속서 AA 맨드렐 시험 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 95 % R.H. |
소재지-2 |
IEC 60335-2-4:2008
+A1:2012+A2:2017 |
Household and similar electrical appliances – Safety – Part 2-4: Particular requirements for spin extractors
[Exception]
18 Endurance |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-4:2023 |
Household and similar electrical appliances – Safety – Part 2-4: Particular requirements for spin extractors
[Exception]
18 Endurance |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-59:2002
+A1:2006+A2:2009 |
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
[Exception]
24 Components
31 Resistance to rusting
32 Radiation, toxicity and similar hazard |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-59:2021 |
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
[Exception]
24 Components
31 Resistance to rusting
32 Radiation, toxicity and similar hazard |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-6:2002
+A1:2004+A2:2008 |
Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
5.4 Appliances that also use gas are supplied with gas at the appropriate rated pressure.
24 Components
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-6:2014
+A1:2018 |
Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
5.4 Appliances that also use gas are supplied with gas at the appropriate rated pressure.
24 Components
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-65:2002
+A1:2008+A2:2015 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
24 Components
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-8:2002
+A1:2005+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
[Exception]
21.1 Three blows are applied to other parts with an impact energy of 0.35 J.
24 Components |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-8:2012
+A1:2015+A2:2018 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
[Exception]
21.1 Three blows are applied to other parts with an impact energy of 0.35 J.
24 Components |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-80:2002
+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-80:2015 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-80:2024 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-84:2002
+A1:2008+A2:2013 |
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-84:2019 |
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-89:2010
+A1:2012+A2:2015 |
Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
[Exception]
22 Test for flammable refrigerants |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-89:2019 |
Household and similar electrical appliances – Safety – Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
[Exception]
22 Test for flammable refrigerants |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-9:2008
+A1:2012+A2:2016 |
Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
21.1 For hotplates having surfaces of glass-ceramic or similar material, three blows are applied to parts of the surface that are not exposed to impacts during the test of 21.101, the impact
energy being 0.70 J ± 0.05 J.
24 Components |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-9:2019 |
Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
21.1 For hotplates having surfaces of glass-ceramic or similar material, three blows are applied to parts of the surface that are not exposed to impacts during the test of 21.101, the impact
energy being 0.70 J ± 0.05 J.
24 Components |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-90:2015
+A1:2019 |
Household and similar electrical appliances – Safety – Part 2-90: Particular requirements for commercial microwave ovens
[Exception]
11.2 A ceiling is placed over the appliance at the minimum height stated in the instructions. The ceiling has a depth of 300 mm from the back wall of the test corner and a length at least 150 mm in excess of the width of the appliance.
24 Components
25.14 For temperature-sensing probes, the total number of flexings is 5 000. Probes with circularsection cords are turned through 90° after 2 500 flexings. |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-115:2021 |
Household and similar electrical appliances - Safety - Part 2-115: Particular requirements for skin beauty care appliances
[Exception]
25.101 Swivel connection test
32 Radiation, toxicity and similar hazards(Ozone concentration measuring apparatus)
Annex R Software evaluation |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60950-1:2005
+A1:2009+A2:2013 |
Information technology equipment – Safety –
Part 1: General requirements
[Exception]
2.10.4 Comparative tracking index
2.10.5.4 Partial discharge test
2.10.7 Enclosed and sealed parts
2.10.8.4 Abrasion resistance test
2.10.9 Thermal cycling and thermal ageing
3.2.5.1 AC Power Supply Cords
4.2.8 Cathode ray tube
4.3.12 Flammable liquids
4.3.13.3 Effect of UV radiation on materials
4.3.13.4 Human exposure to UV radiation
4.3.13.5 Laser radiation
4.5 Three phase voltage supply system
4.6.2 Bottom of fire enclosure
Annex AA Mandrel test
Annex T Guidance on protection against ingress of water |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| IEC 60950-22:2016 |
Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 95 % R.H. |
소재지-2 |
| IEC 60950-23:2005 |
Information technology equipment - Safety -
Part 23: Large data storage equipment |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 95 % R.H. |
소재지-2 |
| IEC 62368-1:2014 |
Audio/video, Information and communication technology equipment –
Part 1: General requirements
[Exception]
5.4.4.6.5 Mandrel test
5.4.1.4 Three phase voltage systems
Annex R Limited short-circuit test
10 Radiations
Annex G.7 Mains supply cords
Annex G.9 Integrated circuit(IC) current limiters
Annex G.13.6 Coated printed boards
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3 Flammability test for the bottom of a fire enclosure
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| IEC 62368-1:2018 |
Audio/video, Information and communication technology equipment –
Part 1: General requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.4.6.5 Mandrel test
5.4.1.4 / B.2.5 / Three phase voltage systems
10 Radiations
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.7 Mains supply cords
Annex G.9 Integrated circuit(IC) current limiters
Annex G.13.6 Coated printed boards
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex P.4 Metallized coatings and adhesives securing parts
Annex R Limited short-circuit test
Annex S.3 Flammability test for the bottom of a fire enclosure
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| IEC 62368-1:2023 |
Audio/video, Information and communication technology equipment –
Part 1: General requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.4.6.5 Mandrel test
5.4.1.4 / B.2.5 / Three phase voltage systems
10 Radiations
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.7 Mains supply cords
Annex G.9 Integrated circuit(IC) current limiters
Annex G.13.6 Coated printed boards
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex P.4 Metallized coatings and adhesives securing parts
Annex R Limited short-circuit test
Annex S.3 Flammability test for the bottom of a fire enclosure
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| KS C IEC 60335-2-24:2017 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-24부: 전기 냉장고, 아이스크림 기기 및 제빙기의 개별 요구사항
[Exception]
22 인화성냉매 시험 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| IEC 60335-2-25:2020 |
Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
[Exception]
11.2 A ceiling is placed over the appliance at the minimum height stated in the instructions.
The ceiling has a depth of 300 mm from the back wall of the test corner and a length at least 150 mm in excess of the width of the appliance.
24 Components
25.14 For temperature-sensing probes, the total number of flexings is 5 000. Probes with circularsection cords are turned through 90° after 2 500 flexings. |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-9:2025 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-9부: 그릴, 토스터및 이와 유사한 휴대용 조리기기의 개별 요구사항
[Exception]
21.1 표면 이 유리 세라믹 및 이와 유사한 물질로 된 핫플레이트의 표면에 21.101의 시험을 하는 동안 충격 시험을 받지 않은 부분에 3번의 충격을 가한다. 이때 충격 에너지는 0.70 J이다.
24 부품 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
IEC 60335-2-25:2010
+A1:2014+A2:2015 |
Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
[Exception]
11.2 A ceiling is placed over the appliance at the minimum height stated in the instructions.
The ceiling has a depth of 300 mm from the back wall of the test corner and a length at least 150 mm in excess of the width of the appliance.
24 Components
25.14 For temperature-sensing probes, the total number of flexings is 5 000. Probes with circularsection cords are turned through 90° after 2 500 flexings. |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-1:2022 |
가정용 및 이와 유사한 전기기기의 안전성－
제1부：일반 요구사항
[Exception]
8.1.1, 8.1.2, 8.1.3, 8.2 충전부에 대한 감전 보호
15.1 내습성
22.32 구조
23.3 내부배선
24 부품
25.14 전원접속 및외부 유연성 코드
부속서 B 충전식 전지를 전원으로 사용하는 기기
부속서 F 커패시터
부속서 H 스위치
부속서 J 코팅된 인쇄 회로 기판
부속서 R 소프트웨어 평가 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-11:2021 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-11부: 회전식 건조기의 개별 요구사항 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-13:2016 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-13부: 전기튀김기, 전기프라이팬 및 이와 유사한 기기의 개별요구사항 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-15:2022 |
가정용 및 이와 유사한 전기기기의 안전성-제2-15부:액체 가열용 전기기기의 개별 요구사항
[Exception]
24 부품 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-2:2015 |
가정용 및 이와 유사한 전기기기의 안전성－
제2-2부：전기 진공청소기 및 물흡입 청소기의 개별 요구사항
[Exception]
21 기계적강도 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-21:2025 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-21부: 전기온수기의 개별요구사항 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-23:2022 |
가정용 및 이와 유사한 전기기기의 안전성－제2-23부：피부 손질 또는 모발 손질용 전기기기의 개별 요구사항
[Exception]
25.101 회전이음쇠 시험 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-24:2025 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-24부: 전기 냉장고, 아이스크림 기기 및 제빙기의 개별 요구사항
[Exception]
22 인화성냉매 시험 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-25:2022 |
가정용 및 이와 유사한 전기기기의 안전성－제2-25부：전자 레인지의 개별 요구사항
[Exception]
11.2 천장은 사용 설명서에서 언급한 최소 높이로 기기 위에 위치한다. 천장은 시험용 코너의 뒷벽으로부터 300 mm 깊이를 가지고, 길이는 기기의 폭을 초과하는 최소 150 mm가 되어야 한다.
24 부품
25.14 온도 감지 프로브에 대하여 총 구부림 횟수는 5 000회로 한다. 단면이 원형의 코드를 가진 프로브는 구부림 횟수를 2 500회 실시한 후 90° 회전한다. |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-4:2025 |
가정용 및 이와 유사한 전기기기의 안전성－제2－4부：전기 탈수기의 개별 요구사항
[Exception]
18 내구성 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-59:2025 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-59부: 전기살충기의 개별 요구사항
[Exception]
24 부품
31 내부식성
32 방사선, 유독성 및 이와 유사한 위험성 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-6:2016 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-6부: 거치형 조리레인지, 호브, 오븐 및 이와 유사한 기기의 개별 요구사항
[Exception]
5.4 가스를 사용하는 기기에는 적절한 정격압력으로 가스를 공급한다.
24 부품
32 방사선, 유독성 및 이와 유사한 위험성 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-6:2022 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-6부: 거치형 조리레인지, 호브, 오븐 및 이와 유사한 기기의 개별 요구사항
[Exception]
5.4 가스를 사용하는 기기에는 적절한 정격압력으로 가스를 공급한다.
24 부품
32 방사선, 유독성 및 이와 유사한 위험성 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-65:2025 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-65부: 공기 청정기의 개별 요구사항
[Exception]
24 부품
32 방사선, 독성 및 이와 유사한 위험성 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-8:2016 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-8부: 면도기, 이발기 및 이와 유사한 전기기기의 개별 요구사항
[Exception]
21.1 기타 부분에서는 0.35 J의 충격 에너지로 3회의 충격을 가한다.
24 부품 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-80:2022 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-80부: 전기 팬(fan)의 개별 요구사항 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-84:2022 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-84부: 화장실용 전기기기의 개별 요구사항 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-89:2015 |
가정용 및 이와 유사한 전기기기의 안전성 — 제2-89부: 내장형 또는 원격 냉각 압축기를 가진 상업용 냉동기기의 개별 요구사항
[Exception]
22 인화성냉매 시험 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 60335-2-90:2025 |
가정용 및 이와 유사한 전기 기기의 안전성–제2-90부: 상업용 전기오븐의 개별 요구사항
[Exception]
11.2 천장은 기기 위에 사용 설명서에서 언급한 최소 높이에 위치한다. 천정은 시험용 코너의 뒷벽으로 부터 300 mm 깊이를 가지고, 길이는 기기의 폭을 초과하는 최소 150 mm가 되어야 한다.
24 부품
25.14 온도 감지 프로브에 대하여 총 구부림 횟수는 5 000회로 한다. 단면이 원형의 코드를 가진 프로브는 구부림 횟수를 2 500회 실시한 후 90° 회전한다. |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KC 62368-1:2025 |
오디오/비디오 및 정보통신기술기기
제1부: 안전 요구 사항
[Exception]
5.4.1.5.3 열 사이클링 시험절차
5.4.4.6.5 맨드릴(mandrel) 시험
5.4.1.4 / B.2.5 / 3상 전원 시스템
10 방사(선)
부속서 G.5.3.4 FIW(완전 절연 권선)을 사용한 변압기
부속서 G.7 주전원 코드
부속서 G.9 집적회로(IC) 전류 제한기
부속서 G.13.6 코팅 인쇄기판
부속서 G.15 가압 액체로 채워진 부품
부속서 J 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 P.4 금속 코팅 및 부품 고정 접착제
부속서 R 제한 단락 회로 시험
부속서 S.3 방화용 엔클로저의 바닥에 대한 난연성 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y 옥외용 엔클로우저 구성 요구 사항 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 40 °C, 95 % R.H. |
소재지-2 |
| KS C IEC 60065:2013 |
오디오, 비디오 및 이와 유사한 전자기기의 안전 요구사항
[Exception]
6.2 레이저 방사
7. 3상전원 시스템
12.3 손으로 조작하는 원격조정장치
13.4 비교 트레킹지수
13.6 절연접합
14.2 캐패시터 및 저항-캐패시터
14.6 스위치
16. 외부 유연성 코드
18. 브라운관의 기계적강도 및 폭축의 영향에 대한 보호
Annex A 물 튀김에 대한 보호가 된 기기의 부가적인 요구사항
Annex H 사이에 끼우는 절연 없이 사용하는 절연된 권선용 전선 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 42 °C, 95 % R.H. |
소재지-2 |
| KS C IEC 60335-1:2016 |
가정용 및 이와 유사한 전기기기의 안전성－
제1부：일반 요구사항
[Exception]
8.1.1, 8.1.2, 8.1.3, 8.2 충전부에 대한 감전 보호
15.1 내습성
22.32 구조
23.3 내부배선
24 부품
25.14 전원접속 및외부 유연성 코드
부속서 B 충전식 전지를 전원으로 사용하는 기기
부속서 F 커패시터
부속서 H 스위치
부속서 J 코팅된 인쇄 회로 기판
부속서 R 소프트웨어 평가 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KS C IEC 60335-2-2:2014 |
가정용 및 이와 유사한 전기기기의 안전성 ― 제2-2부: 전기 진공청소기 및 물흡입 청소기의 개별 요구사항
[Exception]
21 기계적강도 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| KS C IEC 60335-2-23:2016 |
가정용 및 이와 유사한 전기기기의 안전성－제2-23부：피부 손질 또는 모발 손질용 전기기기의 개별 요구사항
[Exception]
25.101 회전이음쇠 시험 |
Input: 600 V, 20 A
Heating: 200 °C
Withstanding Voltage: 5 kV
Stability: 15°
Push-Pull: 250 N
Humidity: 30 °C, 96 % R.H. |
소재지-2 |
| ▶ 유/무선 통신기기 |
| IEEE Std 1528-2013 |
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| Radiocommunications Equipment (General) Rules 2021 |
Radiocommunications Equipment (General) Rules 2021 |
Frequency range: 4 MHz ~ 10 GHz |
소재지 |
| EN 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| EN 50663:2017 |
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz) |
SAR: 300 MHz ~ 6 GHz, MPE: 10 MHz ~ 40 GHz |
소재지 |
| EN 50360:2017/A1:2023 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| IEC/IEEE 62209-1528:2020 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body- mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures |
Frequency range: 4 MHz ~ 10 GHz |
소재지 |
| ETSI EN 303 687 V1.1.1 (2023-06) |
6 GHz WAS/RLAN;Harmonised Standard for access to radio spectrum |
Frequency range: 30 MHz ~ 26 GHz |
소재지 |
| QCVN 136:2025/BKHCN |
National technical regulation on radio access equipment operating in the 6 GHz band |
Frequency range: 30 MHz ~ 26 GHz |
소재지 |
| ETSI EN 301 091-1 V2.1.1 (2017-01) |
Short Range Devices;Transport and Traffic Telematics (TTT);Radar equipment operating in the 76 GHz to 77 GHz range;Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 1: Ground based vehicular radar |
Frequency range: 30 MHz ~ 300 GHz |
소재지 |
| ETSI EN 303 396 V1.1.1 (2016-12) |
Short Range Devices; Measurement Techniques for Automotive and Surveillance Radar Equipment |
Frequency range: 30 MHz ~ 300 GHz |
소재지 |
| RSS-102 Issue 5:2015 |
Radio Frequency Exposure Compliance of Radio communications Apparatus (All Frequency Bands) |
SAR: 300 MHz ~ 6 GHz, MPE: 9 kHz ~ 40 GHz |
소재지 |
| ACMA Radiocommunications Standard 2014 |
Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard
[Exception] 11. Assessment methods for performance standards: aware user devices and non-aware user devices more than 20 cm from the human body |
SAR Frequency range: 300 MHz ~ 6 GHz,
Power Density Frequency range: 6 GHz ~ 75 GHz |
소재지 |
| ANSI C63.10-2013 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices [Exception] 8. Procedure for determining emissions from FM transmitters designed for use in vehicles. 9.Procedures for testing millimeter-wave systems. Annex I. Site considerations for measuring inductive-loop devices in the near field. |
Frequency range: 9 kHz ~ 110 GHz |
소재지 |
| ANSI C63.10-2020 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices [Exception] 8. Procedure for determining emissions from FM transmitters designed for use in vehicles. 9.Procedures for testing millimeter-wave systems. Annex I. Site considerations for measuring inductive-loop devices in the near field. |
Frequency range: 9 kHz ~ 110 GHz |
소재지 |
| ANSI/USEMCSC C63.10-2020/Cor 1-2023 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices Corrigendum 1 |
Frequency range: 9 kHz ~ 110 GHz |
소재지 |
| ANSI/USEMCSC C63.10a-2024 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1 |
Frequency range: 9 kHz ~ 110 GHz |
소재지 |
| ANSI/USEMCSC C63.10a-2024 |
Errata to American National Standard for Procedures for Compliance Testing of Unlicensed Wireless Devices Amendment 1 |
Frequency range: 9 kHz ~ 110 GHz |
소재지 |
| ANSI C63.4a-2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| ANSI C63.4-2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| ARPANSA Radiation Protection Standard 2016 |
Maximum Exposure Levels to Radiofrequency Fields 3 kHz ~ 300 GHz |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| ARPANSA Radiation Protection Standard 2021 |
Standard for Limiting Exposure to Radiofrequency Fields - 100 kHz to 300 GHz |
SAR: 300 MHz ~ 6 GHz,
Power Density : 6 GHz ~ 75 GHz |
소재지 |
| AS/NZS 4268:2017 Amd 1:2021 |
Radio equipment and systems - short range devices - Limits and methods of measurement Amendment No.1 |
Frequency range: 9 kHz ~ 26.5 GHz |
소재지 |
| AS/NZS 4268:2017 |
Radio equipment and systems - short range devices - Limits and methods of measurement |
Frequency range: 9 kHz ~ 26.5 GHz |
소재지 |
| AS/NZS 4295:2015 |
Analogue speech (angle modulated) equipment operating in land mobile and fixed services bands in the frequency range 29.7 MHz to 1 GHz |
Frequency range: 9 kHz ~ 26.5 GHz |
소재지 |
| AS/NZS 4355:2006 (R2016) |
Radiocommunications equipment used in the handphone and citizen band radio services operating at frequencies not exceeding 30 MHz |
Frequency range: 9 kHz ~ 1 GHz |
소재지 |
| AS/NZS 4365:2011 (R2016) |
Radiocommunications equipment used in the UHF citizen band radio service |
Frequency range: 9 kHz ~ 4 GHz |
소재지 |
| AS/NZS 4770:2000 Amdt 1:2004 |
MF and HF radio commnuications equipment in the land mobile service utilizing single sideband suppressed carrier emission |
Frequency range: 9 kHz ~ 2 GHz |
소재지 |
| AS/NZS 4770:2000 (R2013) |
MF and HF radio commnuications equipment in the land mobile service utilizing single sideband suppressed carrier emission |
Frequency range: 9 kHz ~ 2 GHz |
소재지 |
| EN 50360:2017 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| ETSI EN 300 422-1 V2.1.2 (2017-01) |
Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 422-1 V2.2.1 (2021-11) |
Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Audio PMSE Equipment up to 3 GHz; Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 422-2 V2.1.1 (2017-02) |
Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ACA Radiocommunications Standard 2014 |
Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| 3GPP TS 51.010-1:2024 |
3rd Generation Partnership Project; Technical Specification Group Radio Access Network; Digital cellular telecommunications system (Phase 2+);Mobile Station (MS) conformance specification; Part 1: Conformance specification (Release 13) |
Possible to only 2 items-12.2 Radiated Spurious Emissions, 12.4 Radiated Spurious Emissions
for MS Supporting the R-GSM or ER-GSM frequency band |
소재지 |
| 3GPP TS 38.124:2025 |
3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NR; ElectroMagnetic Compatibility (EMC) requirements for mobile terminals and ancillary equipment (Release 19) |
Frequency range: 30 MHz ~ 26 GHz |
소재지 |
| EN 62209-2:2010+A1:2019 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| EN 62311:2008 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
SAR: 300 MHz ~ 6 GHz, MPE: 9 kHz ~ 40 GHz |
소재지 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
SAR: 300 MHz ~ 6 GHz, MPE: 10 MHz ~ 40 GHz |
소재지 |
| EN IEC 62311:2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
SAR: 300 MHz ~ 6 GHz, MPE: 9 kHz ~ 40 GHz |
소재지 |
| EN IEC/IEEE 62209-1528:2021 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body- mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures |
Frequency range: 4 MHz ~ 10 GHz |
소재지 |
| ETSI EN 300 086 V2.1.2 (2016-08) |
Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 220-1 V3.1.1 (2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1000 MHz; Part 1: Technical characteristics and methods of measurement |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-2 V3.1.1 (2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-2 V3.2.1 (2018-06) |
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-2 V3.3.1 (2025-03) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz with power levels ranging up to 500 mW e.r.p.; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 328 V2.1.1 (2016-11) |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 328 V2.2.2 (2019-07) |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 330 V2.1.1 (2017-02) |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 1 GHz |
소재지 |
| EN 50566:2017 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| EN 50566:2017/A1:2023 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human bod |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| EN 50566:2017+A2:2025 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| 3GPP TS 34.124:2025 |
3rd Generation Partnership Project; Technical Specification Group Radio Access Network; ElectroMagnetic Compatibility (EMC) requirements for mobile terminals and ancillary equipment (Release 19) |
Frequency range: 30 MHz ~ 12.75 GHz |
소재지 |
| 3GPP TS 36.124:2025 |
3rd Generation Partnership Project; Technical Specification Group Radio Access Network; Evolved Universal Terrestrial Radio Access (E-UTRA); ElectroMagnetic Compatibility (EMC) requirements for mobile terminals and ancillary equipment (Release 19) |
Frequency range: 30 MHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 440 V2.1.1 (2017-03) |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| ETSI EN 303 413 V1.2.1 (2021-04) |
Satellite Earth Stations and Systems (SES);Global Navigation Satellite System (GNSS) receivers;Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands;Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 8.3 GHz |
소재지 |
| ETSI EN 303 417 V1.1.1 (2017-09) |
Wireless power transmission systems, using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 1 GHz |
소재지 |
| ETSI EN 301 681 V2.1.2 (2016-11) |
Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
Frequency range: 9 kHz ~ 12.75 GHz |
소재지 |
| ETSI EN 301 893 V2.1.1 (2017-05) |
5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 26.5 GHz |
소재지 |
| ETSI EN 301 908-1 V15.2.1 (2023-01) |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements Release 15 |
Frequency range: 30 MHz ~ 26 GHz |
소재지 |
| ETSI EN 301 893 V2.2.1 (2024-11) |
5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 26.5 GHz |
소재지 |
| ETSI EN 302 065-1 V2.1.1 (2016-11) |
Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications |
Frequency range: 30 MHz ~ 40 GHz |
소재지 |
| ETSI EN 302 065-2 V2.1.1 (2016-11) |
Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU;Part 2: Requirements for UWB location tracking |
Frequency range: 30 MHz ~ 40 GHz |
소재지 |
| ETSI EN 303 340 V1.1.2 (2016-09) |
Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 340 V1.2.1 (2020-09) |
Digital Terrestrial TV Broadcast Receivers; Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 345-1 V1.1.1 (2019-06) |
Broadcast Sound Receivers; Part 1: Generic requirements and measuring methods |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 345-2 V1.1.1 (2020-02) |
Broadcast Sound Receivers; Part 2: AM broadcast sound service; harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 345-2 V1.2.1 (2021-12) |
Broadcast Sound Receivers; Part 2: AM broadcast sound service; harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 345-3 V1.1.1 (2021-06) |
Broadcast Sound Receivers;Part 3: FM broadcast sound service;Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 345-4 V1.1.1 (2021-06) |
Broadcast Sound Receivers;Part 4: DAB broadcast sound service;Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 303 345-5 V1.1.1 (2020-02) |
Broadcast Sound Receivers; Part 5: DRM broadcast sound service; harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 305 550-2 V1.2.1 (2014-10) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
Frequency range: 30 MHz ~ 300 GHz |
소재지 |
| ETSI EN 305 550-1 V1.2.1 (2014-10) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 1: Technical characteristics and test methods |
Frequency range: 30 MHz ~ 300 GHz |
소재지 |
| RSS-Gen Issue 5:2018 |
General Requirements for Compliance of Radio Apparatus |
Frequency range: 9 kHz ~ 200 GHz |
소재지 |
| RSS-247 Issue 3:2023 |
Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| RSS-247 Issue 4:2025 |
Digital Transmission Systems, Frequency Hopping Systems and Licence-Exempt Local Area Network Devices in 902-928 MHz, 2400-2483.5 MHz, 5150-5350 MHz, and 5470-5895 MHz bands |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| RSS-210 Issue 11:2024 |
Licence-Exempt Radio Apparatus: Category I Equipment |
Frequency range: 9 kHz ~ 200 GHz |
소재지 |
| ETSI EN 301 511 V12.5.1 (2017-03) |
Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 4 GHz |
소재지 |
| ETSI EN 301 357 V2.1.1 (2017-06) |
Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 10 GHz |
소재지 |
| ETSI EN 300 440 V2.2.1 (2018-07) |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| ETSI TS 151 010-1 V13.14.0 (2024-06) |
Digital cellular telecommunications system (Phase 2+) (GSM);Mobile Station (MS) conformance specification;Part 1: Conformance specification (3GPP TS 51.010-1 version 13.14.0 Release 13) |
Possible to only 2 items-12.2 Radiated Spurious Emissions, 12.4 Radiated Spurious Emissions
for MS Supporting the R-GSM or ER-GSM frequency band |
소재지 |
| FCC Part 15:2024 |
Radio Frequency Devices |
Frequency range: 9 kHz ~ 325 GHz |
소재지 |
| FCC Part 2.1055:2024 |
Measurements required: Frequency stability |
Frequency range: 9 kHz ~ 325 GHz |
소재지 |
| FCC Part 2.1091:2017 |
Radiofrequency radiation exposure evaluation: mobile devices. |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| FCC Part 2.1093:2017 |
Radiofrequency radiation exposure evaluation: portable devices. |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| FCC Part 22:2024 |
Public mobile services |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 24:2024 |
Personal communications services |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 27:2024 |
Miscellaneous wireless communications services.
Except) 27.60 TV/DTV interference protection criteria |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 90:2024 |
Private land mobile radio services |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 95:2024 |
Personal radio services |
Frequency range: 9 kHz ~ 40 GHz |
소재지 |
| IEC 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| IEC 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| IEC 62209-2:2010+A1:2019 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| IEC TR 63170:2018 |
Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz |
Power Density Frequency range: 6 GHz ~ 75 GHz |
소재지 |
| ETSI EN 303 413 V1.1.1 (2017-06) |
Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Frequency range: 9 kHz ~ 8.3 GHz |
소재지 |
| ETSI EN 303 345-5 V1.2.1 (2021-12) |
Broadcast Sound Receivers; Part 5: DRM broadcast sound service; harmonised Standard for access to radio spectrum |
Frequency range: 9 kHz ~ 6 GHz |
소재지 |
| EN 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
SAR: 300 MHz ~ 6 GHz |
소재지 |
| QCVN 54: 2020/BTTTT |
National Technical Regulation on Radio Transceiver equipment using Spread-Spectrum Modulation Technique in the 2.4 GHz band |
Frequency range: 30 MHz ~ 12.75 GHz |
소재지 |
| QCVN 55: 2023/BTTTT |
National Technical Regulation on Short Range Devices (SRDs) |
Frequency range: 9 kHz ~ 1 GHz |
소재지 |
| QCVN 65: 2021/BTTTT |
National Technical Regulation on radio access equipment operating in the 5GHz band |
Frequency range: 30 MHz ~ 26 GHz |
소재지 |
| QCVN 123: 2021/BTTTT |
National Technical Regulation on short-range radio equipment in the frequency range 40 GHz to 246 GHz |
Frequency range: 30 MHz ~ 300 GHz |
소재지 |
| QCVN 134:2024/BTTTT |
National technical regulation on Specific Absorbtion Rates for Mobile Phone |
Frequency range: 4 MHz ~ 10 GHz |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-49:2019 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Sound level: 95 dB
Measuring resistance: 10 MΩ
Measuring distance: 7 000 mm |
소재지-2 |
| EN IEC 80601-2-49:2019+A1:2024 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Sound level: 95 dB
Measuring resistance: 10 MΩ
Measuring distance: 7 000 mm |
소재지-2 |
| EN 60601-1-3:2008+A11:2016+A2:2021 |
Medical electrical equipment - Part 1-3 : General requirements for basic safety and essential performance
- Collateral Standard : Radiation protection in diagnostic Xray equipment |
Power supply: single phase, three phase
Measuring distance: 7 000 mm
Measuring luminance: 1 500 lx
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-1-3:2008+A11:2016 |
Medical electrical equipment - Part 1-3 : General requirements for basic safety and essential performance
- Collateral Standard : Radiation protection in diagnostic Xray equipment |
Power supply: single phase, three phase
Measuring distance: 7 000 mm
Measuring luminance: 1 500 lx
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-1-11:2015+A1:2021 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C |
소재지-2 |
| EN 60601-1-11:2015 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C |
소재지-2 |
| EN 60601-1-10:2008+A1:2015+A2:2021 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
Applied temperature: (-40 ~ 130) °C
Applied humidity: (0 ~ 93) % R.H. |
소재지-2 |
| EN 60601-1-10:2008+A1:2015 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
Applied temperature: (-40 ~ 130) °C
Applied humidity: (0 ~ 93) % R.H. |
소재지-2 |
| EN 60601-1:2006+A1:2013+A2:2021 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Resistance to environmental stress -Requirements of insulating material for rubber
8.9.1.7 Material groups classification
9.5.2 Cathode ray tubes
10.3 Microwave radiation
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Measuring capacitance: 100 ㎌
Applied force: 2 000 N
Measuring time: 9 h
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H.
Measuring angle: 90°
Measuring pressure: 10 MPa
Measuring torque: 10 N.m
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| EN 60601-1:2006+A1:2013 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Resistance to environmental stress -Requirements of insulating material for rubber
8.9.1.7 Material groups classification
9.5.2 Cathode ray tubes
10.3 Microwave radiation
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Measuring capacitance: 100 ㎌
Applied force: 2 000 N
Measuring time: 9 h
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H.
Measuring angle: 90°
Measuring pressure: 10 MPa
Measuring torque: 10 N.m
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| EN 60601-2-5:2015 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~ 45) ㎒ |
소재지-2 |
| EN 60601-2-10:2015 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| EN 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring tube voltage: (45 ~ 160) kVp
Measuring angle: 90˚ |
소재지-2 |
| EN 60601-2-44:2009+A1:2012 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring tube voltage: (45 ~ 160) kVp
Measuring angle: 90˚ |
소재지-2 |
| EN IEC 60601-2-43:2023 |
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring resistance: 10 MΩ
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN IEC 60601-2-37:2024 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~ 45) ㎒ |
소재지-2 |
| EN 60601-2-37:2008+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~ 45) ㎒ |
소재지-2 |
| EN IEC 60601-2-34:2024 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
[Exception]
201.12.1.101.2 Accuracy of systolic and diastolic
201.12.1.101.3 Frequency response |
Measuring pressure: 10 MPa
Sound level: 95 dB |
소재지-2 |
| EN 60601-2-27:2014 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring distance: 7 000 mm |
소재지-2 |
| EN 60601-2-25:2015 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring distance: 7 000 mm |
소재지-2 |
| EN 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
Measuring pressure: 10 MPa |
소재지-2 |
| EN 60601-2-18:2015 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment |
Measuring temperature: 200 °C
Measuring current: 950 A |
소재지-2 |
| EN 60601-2-10:2015+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| EN 60601-2-10:2015+A1:2016+A2:2024 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| IEC 60601-1-11:2015 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C |
소재지-2 |
| EN 60601-1-6:2010+A1:2015 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN 60601-1-6:2010+A1:2015+A2:2021 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN IEC 60601-2-2:2018+A1:2024 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| IEC 60601-1-10:2007+A1:2013+A2:2020 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
Applied temperature: (-40 ~ 130) °C
Applied humidity: (0 ~ 93) % R.H. |
소재지-2 |
| IEC 60601-1-10:2007+A1:2013 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
Applied temperature: (-40 ~ 130) °C
Applied humidity: (0 ~ 93) % R.H. |
소재지-2 |
| IEC 60601-1:2005+A1:2012+A2:2020 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Resistance to environmental stress -Requirements of insulating material for rubber
8.9.1.7 Material groups classification
9.5.2 Cathode ray tubes
10.3 Microwave radiation
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Measuring capacitance: 100 ㎌
Applied force: 2 000 N
Measuring time: 9 h
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H.
Measuring angle: 90°
Measuring pressure: 10 MPa
Measuring torque: 10 N.m
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| IEC 60601-1:2005+A1:2012 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
8.8.4.2 Resistance to environmental stress -Requirements of insulating material for rubber
8.9.1.7 Material groups classification
9.5.2 Cathode ray tubes
10.3 Microwave radiation
11.2.2 ME EQUIPMENT and ME SYSTEMS used in conjunction with OXYGEN RICH ENVIRONMENTS
11.2.3 SINGLE FAULT CONDITIONS related to OXYGEN RICH ENVIRONMENTS in conjunction with ME EQUIPMENT and ME SYSTEMS
11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against HAZARDS of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Measuring capacitance: 100 ㎌
Applied force: 2 000 N
Measuring time: 9 h
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H.
Measuring angle: 90°
Measuring pressure: 10 MPa
Measuring torque: 10 N.m
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| EN ISO 80601-2-61:2026 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN ISO 80601-2-56:2017+A1:2020 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN ISO 80601-2-56:2017 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN IEC 80601-2-60:2020 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Measuring capacitance: 100 ㎌
Applied force: 2 000 N
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H.
Measuring angle: 90°
Measuring pressure: 10 MPa
Measuring torque: 10 N.m
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| EN IEC 80601-2-30:2019 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
Measuring pressure: 10 MPa |
소재지-2 |
| EN IEC 60601-2-50:2021 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
Measuring distance: 7 000 mm
Applied force: 2 000 N
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| EN IEC 60601-2-50:2021+A1:2023 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
Measuring distance: 7 000 mm
Applied force: 2 000 N
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| EN IEC 60601-2-41:2021 |
Medical electrical equipment - Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis |
Measuring illuminance: 1 500 lx |
소재지-2 |
| EN 60601-1-8:2007+A11:2017 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 dB |
소재지-2 |
| EN 60601-1-8:2007+A11:2017+A2:2021 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 dB |
소재지-2 |
| EN 60601-2-4:2011 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.12.1 Accuracy of controls and instruments
201.108 Defibrillator electrodes
201.109 External pacing |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N |
소재지-2 |
| EN 60601-2-4:2011+A1:2019 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.12.1 Accuracy of controls and instruments
201.108 Defibrillator electrodes
201.109 External pacing |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N |
소재지-2 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICE
203.6.7.102 Motion of the ANTI-SCATTER GRID under maximum compression force
203.6.7.103 ARTEFACTS from grid lines
203.8.5.4.102.6 Compression force |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-2-45:2011+A1:2015+A2:2024 |
Medical electrical equipment - Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICE
203.6.7.102 Motion of the ANTI-SCATTER GRID under maximum compression force
203.6.7.103 ARTEFACTS from grid lines
203.8.5.4.102.6 Compression force |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-2-47:2015 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A |
소재지-2 |
| EN IEC 60601-2-21:2021+A1:2023 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
[Exception]
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN IEC 60601-2-21:2021 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
[Exception]
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN IEC 60601-2-22:2020 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
Measuring distance: 7 000 mm
Applied force: 2 000 N
Measuring power: 10 ㎼ ~ 300 W
Measuring wavelength: (350 ~ 1 700) nm |
소재지-2 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Power supply: single phase, three phase
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| IEC 60601-2-37:2007 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~45) ㎒ |
소재지-2 |
| IEC 60601-2-37:2007+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~45) ㎒ |
소재지-2 |
| IEC 60601-2-37:2024 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~45) ㎒ |
소재지-2 |
| IEC 60601-2-18:2009 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment |
Measuring temperature: 200 °C
Measuring current: 950 A |
소재지-2 |
| IEC 60601-2-10:2012+A1:2016+A2:2023 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| IEC 60601-2-10:2012 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| IEC 60601-2-5:2009 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
Measuring power: 100 W
Measuring frequency: (0.5 ~ 45) ㎒ |
소재지-2 |
| IEC 60601-2-4:2010+A1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.12.1 Accuracy of controls and instruments
201.108 Defibrillator electrodes
201.109 External pacing |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N |
소재지-2 |
| IEC 60601-2-4:2010 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.12.1 Accuracy of controls and instruments
201.108 Defibrillator electrodes
201.109 External pacing |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N |
소재지-2 |
| IEC 60601-2-2:2017+A1:2023 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| IEC 60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring power: 12 kW
Measuring distance: 7 000 mm
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Applied force: 2 000 N
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| IEC 60601-1-8:2006+A1:2012+A2:2020 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 dB |
소재지-2 |
| IEC 60601-1-8:2006+A1:2012 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 dB |
소재지-2 |
| IEC 60601-1-6:2010+A1:2013+A2:2020 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 60601-1-6:2010+A1:2013 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 60601-2-34:2011 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
[Exception]
201.12.1.101.2 Accuracy of systolic and diastolic
201.12.1.101.3 Frequency response |
Measuring pressure: 10 MPa
Sound level: 95 dB |
소재지-2 |
| IEC 60601-2-34:2024 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
[Exception]
201.12.1.101.2 Accuracy of systolic and diastolic
201.12.1.101.3 Frequency response |
Measuring pressure: 10 MPa
Sound level: 95 dB |
소재지-2 |
| IEC 60601-2-28:2017 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Power supply: single phase, three phase
Measuring distance: 7 000 mm
Measuring resistance: 10 MΩ |
소재지-2 |
| IEC 60601-2-27:2011 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring distance: 7 000 mm |
소재지-2 |
| EN IEC 60601-2-54:2024 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN IEC 60601-2-57:2026+A11:2026 |
Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
Measuring distance: 7 000 mm
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| EN 60601-2-62:2015 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
Measuring power: 100 W
Measuring frequency: (0.25 ~ 10) ㎒ |
소재지-2 |
| EN 60601-2-63:2015+A1:2019 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-2-63:2015+A1:2019+A2:2021 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-2-65:2013 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN 60601-2-65:2013+A1:2020+A2:2021 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| EN IEC 60601-2-66:2020 |
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
Measuring frequency: (200 ~ 7 200) Hz |
소재지-2 |
| EN 62366-1:2015 |
Medical devices - Part 1: Application of usability engineering to medical devices |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN 62366-1:2015+A1:2020 |
Medical devices - Part 1: Application of usability engineering to medical devices |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 60601-2-21:2020+A1:2023 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
[Exception]
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 60601-2-21:2020 |
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
[Exception]
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 60601-2-22:2019 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
Measuring distance: 7 000 mm
Applied force: 2 000 N
Measuring power: 10 ㎼ ~ 300 W
Measuring wavelength: (350 ~ 1 700) nm |
소재지-2 |
| IEC 60601-2-24:2012 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
Measuring pressure: 10 MPa |
소재지-2 |
| IEC 60601-2-25:2011 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring distance: 7 000 mm |
소재지-2 |
| IEC 60601-1-3:2008+A1:2013+A2:2021 |
Medical electrical equipment - Part 1-3 : General requirements for basic safety and essential performance
- Collateral Standard : Radiation protection in diagnostic Xray equipment |
Power supply: single phase, three phase
Measuring distance: 7 000 mm
Measuring luminance: 1 500 lx
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-1-3:2008+A1:2013 |
Medical electrical equipment - Part 1-3 : General requirements for basic safety and essential performance
- Collateral Standard : Radiation protection in diagnostic Xray equipment |
Power supply: single phase, three phase
Measuring distance: 7 000 mm
Measuring luminance: 1 500 lx
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-41:2021 |
Medical electrical equipment - Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis |
Measuring illuminance: 1 500 lx |
소재지-2 |
| IEC 60601-2-54:2022 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-54:2009+A1:2015+A2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-54:2009+A1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-50:2020+A1:2023 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
Measuring distance: 7 000 mm
Applied force: 2 000 N
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| IEC 60601-2-50:2020 |
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
Measuring distance: 7 000 mm
Applied force: 2 000 N
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| IEC 60601-2-49:2011 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Sound level: 95 dB
Measuring resistance: 10 MΩ
Measuring distance: 7 000 mm |
소재지-2 |
| IEC 60601-2-47:2012 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A |
소재지-2 |
| IEC 60601-2-45:2011+A1:2015+A2:2022 |
Medical electrical equipment - Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICE
203.6.7.102 Motion of the ANTI-SCATTER GRID under maximum compression force
203.6.7.103 ARTEFACTS from grid lines
203.8.5.4.102.6 Compression force |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICE
203.6.7.102 Motion of the ANTI-SCATTER GRID under maximum compression force
203.6.7.103 ARTEFACTS from grid lines
203.8.5.4.102.6 Compression force |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-45:2011 |
Medical electrical equipment - Part 2-45: Particular requirements for basic safety and essential performance of mammographic X-ray equipment and mammomagraphic stereotactic devices
[Exception]
201.9.2.101.3 Biopsy needle positioning accuracy of MAMMOGRAPHIC STEREOTACTIC DEVICE
203.6.7.102 Motion of the ANTI-SCATTER GRID under maximum compression force
203.6.7.103 ARTEFACTS from grid lines
203.8.5.4.102.6 Compression force |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring tube voltage: (45 ~ 160) kVp
Measuring angle: 90˚ |
소재지-2 |
| IEC 60601-2-44:2009+A1:2012 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring tube voltage: (45 ~ 160) kVp
Measuring angle: 90˚ |
소재지-2 |
| IEC 60601-2-43:2010+A1:2017+A2:2019 |
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring resistance: 10 MΩ
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-43:2022 |
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring resistance: 10 MΩ
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-1-11:2015+A1:2020 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance
- Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C |
소재지-2 |
| IEC 60601-2-57:2011 |
Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
Measuring distance: 7 000 mm
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| IEC 60601-2-57:2023 |
Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
Measuring distance: 7 000 mm
Measuring power: 10 ㎼ ~ 300 W |
소재지-2 |
| IEC 60601-2-62:2013 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment |
Measuring power: 100 W
Measuring frequency: (0.25 ~ 10) ㎒ |
소재지-2 |
| IEC 60601-2-43:2010+A1:2017 |
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Power supply: single phase, three phase
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Measuring resistance: 10 MΩ
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| ISO 80601-2-61:2017 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| ISO 80601-2-61:2026 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| ISO 80601-2-61:2011 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| ISO 80601-2-56:2017+A1:2018 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| ISO 80601-2-56:2017 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Applied voltage: 60 Kv a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Applied current: 60 A
Measuring current: 950 A
Measuring frequency: 1 GHz
Measuring power: 12 kW
Measuring distance: 7 000 mm
Applied temperature: (-40 ~ 130) °C
Measuring temperature: 200 °C
Measuring resistance: 10 MΩ
Measuring capacitance: 100 ㎌
Applied force: 2 000 N
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H.
Measuring angle: 90°
Measuring pressure: 10 MPa
Measuring torque: 10 N.m
Measuring atmospheric pressure: 1 040 hPa |
소재지-2 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Sound level: 95 dB
Measuring resistance: 10 MΩ
Measuring distance: 7 000 mm |
소재지-2 |
| IEC 80601-2-49:2018+A1:2024 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
Applied voltage: 60 kV a.c. / 10 kV d.c.
Measuring voltage: 30 kV a.c. / 30 kV d.c.
Measuring current: 950 A
Sound level: 95 dB
Measuring resistance: 10 MΩ
Measuring distance: 7 000 mm |
소재지-2 |
| IEC 80601-2-30:2018 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
Measuring pressure: 10 MPa |
소재지-2 |
| IEC 62366-1:2015+A1:2020 |
Medical devices - Part 1: Application of usability engineering to medical devices |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 62366-1:2015 |
Medical devices - Part 1: Application of usability engineering to medical devices |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| IEC 60601-2-66:2019 |
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
Measuring frequency: (200 ~ 7 200) Hz |
소재지-2 |
| IEC 60601-2-65:2012+A1:2017+A2:2021 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-65:2012+A1:2017 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-63:2012+A1:2017+A2:2021 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-2-63:2012+A1:2017 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Power supply: single phase, three phase
Measuring tube voltage: (35 ~ 160) kVp
Measuring radiation dosage: 15 nGy ~ 1 000 Gy
Measuring current time: (0.1 ~ 9 999) mAs
Measuring current: (0.1 ~ 3 000) mA |
소재지-2 |
| IEC 60601-1-9:2007+A1:2013+A2:2020 |
Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| EN 60601-1-9:2008+A1:2013+A2:2020 |
Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design |
Applied temperature: (-40 ~ 130) °C
Applied humidity: 93 % R.H.
Measuring humidity: 80 % R.H. |
소재지-2 |
| ▶ 전자기적합성 |
| SANS 61000-4-5:2006 |
Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test
[Exception]
above 16 A equipment and 3 phase
connection
equipment |
Surge: Max ± 6 kV |
소재지 |
| KS C 9815:2019 |
조명 기기 및 유사 기기의 무선 방해 특성 측정 허용기준과 측정방법
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE : 9 kHz ~ 30 MHz
RE : 30 kHz ~ 1 GHz |
소재지 |
| KS C 9547:2023 |
일반 조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9547:2020 |
일반 조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes –
EMC immunity requirements |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61547:2009/COR1:2010 |
Equipment for general lighting purposes –
EMC immunity requirements |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61547:2023 |
Equipment for general lighting purpose –
EMC immunity requirements |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 55015:2019/A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 30 kHz ~ 1 GHz |
소재지 |
| EN IEC 55015:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 30 kHz ~ 1 GHz |
소재지 |
| EN 61547:2009 |
Equipment for general lighting purpose –
EMC immunity requirements |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55015:2013/A1:2015 |
Limits and methods of measurement of radio isturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 30 kHz ~ 1 GHz |
소재지 |
| CISPR 15:2018+A1:2024 |
Limits and methods of measurement of radio isturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| KS C CISPR 24:2014 |
전기자기적합성(EMC) — 정보 기기(ITE)의 전기자기 내성 시험방법 및 측정의 한계값
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55024:2010 /A1:2015 |
Information technology equipment
- Immunity characteristics
- Limits and methods of measurement
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55013:2013+A1:2016 |
Sound and television broadcast receivers and associated equipment
-Radio disturbance characteristics
-Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
Disturbance voltage:
9 kHz ~ 2.15 GHz
Radiated Power:
9 kHz ~ 18 GHz |
소재지 |
| CISPR 24:2010+AMD1:2015 |
Information technology equipment
- Immunity characteristics
- Limits and methods of measurement
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| SANS 61000-4-8:2009 |
Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Magnetic: Max 30 A/m |
소재지 |
| SANS 61000-4-6:2017 |
Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
[Exception]
above 16 A equipment and 3 phase
connection equipment |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지 |
| KS C 9815:2017 |
조명 기기 및 유사 기기의 무선 방해 특성 측정 허용기준 및 측정방법
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE : 9 kHz ~ 30 MHz
RE : 30 kHz ~ 1 GHz |
소재지 |
| KS C 9815:2023 |
조명 기기 및 유사 기기의 무선 방해 특성 측정 허용기준과 측정방법
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE : 9 kHz ~ 30 MHz
RE : 30 kHz ~ 1 GHz |
소재지 |
| AS/NZS 61000-6-1:2025 |
Electromagnetic
compatibility (EMC)-Part
6-1 : Generic standards - Immunity for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| AS/NZS 61000-6-1:2006 |
Electromagnetic
compatibility (EMC)-Part
6-1 : Generic standards - Immunity for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC)-제6-3부: 일반표준- 주거용, 상업용 및 경공업 산업환경에 사용하는 기기의 전자파 방해 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| KS C 9610-6-3:2017 |
전자파적합성(EMC)-제6-3부: 일반표준- 주거용, 상업용 및 경공업 산업환경에 사용하는 기기의 전자파 방해 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) ─ 제6-1부: 일반표준 —
주거, 상업 및 경공업 환경에서 사용하는
기기의 전자파 내성 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9610-6-1:2017 |
전자파적합성(EMC)-제6-1부: 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Emission standard for residential, commercial and light – industrial environments
[Exception]
above 16 A equipment and 3 phase |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IEC 61000-6-3:2026 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Emission standard for residential, commercial and light – industrial environments
[Exception]
above 16 A equipment and 3 phase |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IEC 61000-6-3:2006+A1:2010 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Emission standard for residential, commercial and light – industrial environments
[Exception]
above 16 A equipment and 3 phase |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC)-Part 6-1 : Generic standards. Immunity standard for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61000-6-1:2005 |
Electromagnetic compatibility (EMC)-Part 6-1 : Generic standards. Immunity standard for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC)-Part 6-1 : Generic standards. Immunity standard for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Emission standard for residential, commercial and light – industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Emission standard for residential, commercial and light – industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC)-Part 6-1 : Generic standards - Immunity for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| AS/NZS 61000-6-3:2021 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Immunity for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| AS/NZS 61000-6-3:2012 |
Electromagnetic compatibility (EMC)-Part 6-3 : Generic standards - Immunity for residential, commercial and light-industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| AS/NZS 61000-6-4:2012 |
Electromagnetic compatibility (EMC) Part 6.4: Generic standards — Emission standard for industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IEC 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC)
- Part 4-5: Testing and measurement
techniques
- Surge immunity test
[Exception]
above 16 A equipment and 3 phase
connection
equipment |
Surge: Max ± 6 kV |
소재지 |
| IEC 61000-4-5:2014 |
Electromagnetic compatibility (EMC)
- Part 4-5: Testing and measurement
techniques
- Surge immunity test
[Exception]
above 16 A equipment and 3 phase
connection
equipment |
Surge: Max ± 6 kV |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC)- Part 4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity test
[Exception]
above 16 A equipment and 3 phase connection equipment |
EFT/Burst: Max ± 4 kV |
소재지 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC)
- Part 4-3: Testing and measurement techniques
- Radiated, radio-frequency, electromagnetic field
immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz) |
소재지 |
| IEC 61000-4-3:2006+A2:2010 |
Electromagnetic compatibility (EMC)
- Part 4-3: Testing and measurement techniques
- Radiated, radio-frequency, electromagnetic field
immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz) |
소재지 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max ± 30 kV |
소재지 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max ± 30 kV |
소재지 |
| IEC 61000-4-13:2002+A2:2015 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
Class 1, 2, 3 |
소재지 |
| IEC 61000-4-13:2009 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
Class 1, 2, 3 |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC)
- Part 4-11: Testing and measurement
techniques
- Voltage dips, short interruptions and voltage variations immunity tests
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC)
- Part 4-11: Testing and measurement
techniques
- Voltage dips, short interruptions and voltage variations immunity tests
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61000-3-3:2013+A1:2017+A2:2021 |
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-3:2013/AMD2:2021 |
Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-3:2013 /A1:2017 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to
conditional connection
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-3:2013 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-2:2018+A1:2020+A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-2:2018/AMD1:2020 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-2:2018 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61000-3-2:2014 |
Electromagnetic compatibility (EMC) - Part 3-2: Limit for harmonics current emissions (equipment input current up to and including 16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement
techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
[Exception]
above 16 A equipment and 3 phase
connection equipment |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
RS: Max 10 V/m
(80 MHz ~ 6 GHz) |
소재지 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement
techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
[Exception]
above 16 A equipment and 3 phase
connection equipment |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지 |
| IEC 61000-4-6:2013 |
Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement
techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
[Exception]
above 16 A equipment and 3 phase
connection equipment |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC)
- Part 4-8: Testing and measurement
techniques
- Power frequency magnetic field immunity
test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Magnetic: Max 30 A/m |
소재지 |
| IEC 61204-3:2016 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic Compatibility (EMC) |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 2.7 GHz)
EFT: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz - 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 - 100) % |
소재지 |
| SANS 61000-4-3:2008 |
Electromagnetic compatibility (EMC) Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
RS: Max 10 V/m
(80 MHz ~ 6 GHz) |
소재지 |
| SANS 61000-4-2:2009 |
Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max ± 30 kV |
소재지 |
| SANS 61000-4-11:2005 |
Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage Dip: (0 ~ 100) % |
소재지 |
| SANS 61000-3-3:2009 |
Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| SANS 61000-3-2:2009 |
Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| KS C IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV |
전기자기적합성(EMC)－제4-13부：시험 및
측정기술－교류전원 포트에서 주전원
신호를 포함하는 고조파와
내부고조파,저주파 내성 시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Class 1, 2, 3 |
소재지 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) 제4-8부 : 시험 및 측정기술
- 전원 주파수 자기장 내성 시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Magnetic: Max 30 A/m |
소재지 |
| KS C 9610-4-6:2020 |
전기자기적합성(EMC)-제4-6부:시험 및 측정기술
전도성 RF 전자기장 내성 시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
10 kHz ~ 230 MHz |
소재지 |
| KS C 9610-4-6:2017 |
전기자기적합성(EMC)-제4-6부:시험 및 측정기술
전도성 RF 전자기장 내성 시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
10 kHz ~ 230 MHz |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) 제4-5부: 시험 및 측정기술
- 서지 내성시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Surge: Max 6 kV |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) 제4-4부: 시험 및 측정기술
- 전기적 빠른 과도현상, 버스트 내성시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
EFT/Burst: Max 4 kV |
소재지 |
| KS C 9610-4-4:2017 |
전자파적합성(EMC) 제4-4부: 시험 및 측정기술
- 전기적 빠른 과도현상, 버스트 내성시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
EFT/Burst: Max 4 kV |
소재지 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) 제4-3부: 시험 및 측정기술
- 방사성 RF 전자기장 내성시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz) |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) 제4-2부: 시험 및 측정기술
- 정전기 방전 내성 시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
ESD: Max ± 30 kV |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) 제4-11부: 시험 및 측정기술
-전압강하, 순간정전, 전압변동 내성시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9610-4-11:2017 |
전자파적합성(EMC) 제4-11부: 시험 및 측정기술
-전압강하, 순간정전, 전압변동 내성시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9610-3-3:2017 |
전자파적합성(EMC) - 제3-3부: 허용기준
-공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준 (상당 16 A 이하 기기)
[제외항목]
3상 결선 시험품 |
Voltage: 250 V 16 A (max) |
소재지 |
| KS C 9610-3-2:2017 |
전자파적합성(EMC) - 제3-2부: 허용기준
-고조파 전류의 허용기준 (상당 입력 전류 16 A 이하 기기)
[제외항목]
3상 결선 시험품 |
Voltage: 250 V 16 A (max) |
소재지 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-3-2:2019/A2:2024 |
Electromagnetic compatibility (EMC) - Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase)
[Exception] 3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| EN IEC 61000-3-2:2019+A1:2021 |
Electromagnetic compatibility (EMC) - Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase)
[Exception] 3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| EN IEC 61000-3-2:2019 |
Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current ≤16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| ANSI C 63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지 |
| KS C IEC 60601-1-2:2017 |
의료용 전기기기 - 제1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항
-보조표준: 전자파 장해 - 요구사항 및 시험
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품
표 6 – 공급선을 따라 발생 하는 전기적 과도전도 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 60601-1-2:2015 |
Medical electrical equipment Part 1-2 : General
requirements for basic safety and essential
performance Collateral standard :
Electromagnetic disturbances Requirements and tests
[Exception]
above 16 A equipment and 3 phase
connection equipment
Table 6 – Electrical transient conduction along supply lines |
Voltage: 250 V 16 A (max)
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 50130-4:2011/A1:2014 |
Alarm systems - Part 4: Electromagnetic compatibility
- Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 — 무선 주파수 방해 특성 — 허용기준 및 측정방법
[제외항목]5.2.2 150 ㎑에서 1 ㎓사이의 주파수 대역중 표3a- 피시험기기 주위의 2m 루프안테나의 자계유도 전류 허용 기준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| KS C 9811:2017 |
산업, 과학, 의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
[제외항목]5.2.2 150 ㎑에서 1 ㎓사이의 주파수 대역중 표3a- 피시험기기 주위의 2m 루프안테나의 자계유도 전류 허용 기준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) -제6-4부: 일반 표준 - 산업 환경에서의 전자파 방출 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| KS C 9610-6-4:2017 |
전자파적합성(EMC) - 제6-4부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) —제6-2부: 일반표준 —
산업 환경에서 사용하는 기기의 전자파 내성 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9610-6-2:2017 |
전자파적합성(EMC) - 제6-2부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[Exception]
above 16 A equipment and 3 phase
connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IEC 61000-6-2:2005 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61000-6-4:2007+A1:2011 |
Electromagnetic compatibility (EMC) — Part 6-4: Generic standards — Emission standard for industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 61000-6-2:2005 |
Electromagnetic compatibility (EMC) — Part 6-2: Generic standards — Immunity for industrial environments
[Exception]
above 16 A equipment and 3 phase connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ANSI C 63.4-2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지 |
| EN 61000-3-2:2014 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| EN 61000-3-3:2013 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-2: Particular requirements Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-1: Particular requirements Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61326-1:2013 |
Electrical equipment for measurement,
control and laboratory use
- EMC requirements
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61204-3:2018 |
Low voltage power supplies, d,c. output
-Part 3: Electromagnetic Compatibility
(EMC) |
Voltage: 250 V 16 A (max)
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61204-3:2018 |
Low voltage power supplies, d,c. output
-Part 3: Electromagnetic Compatibility
(EMC) |
Voltage: 250 V 16 A (max)
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC)
- Part 4-8: Testing and measurement
techniques
- Power frequency magnetic field immunity
test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Magnetic: Max 30 A/m |
소재지 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement
techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
[Exception]
above 16 A equipment and 3 phase
connection equipment |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지 |
| EN 61000-4-5:2014/A1:2017 |
Electromagnetic compatibility (EMC)
- Part 4-5: Testing and measurement
techniques
- Surge immunity test
[Exception]
above 16 A equipment and 3 phase
connection
equipment |
Surge: Max ± 6 kV |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC)
- Part 4-4: Testing and measurement
techniques
- Electrical fast transient/burst immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
FT/Burst: Max ± 4 kV |
소재지 |
| EN 61000-4-3:2006+A2:2010 |
Electromagnetic compatibility (EMC)
- Part 4-3: Testing and measurement techniques
- Radiated, radio-frequency, electromagnetic
field immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz) |
소재지 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max ± 30 kV |
소재지 |
| EN IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max ± 30 kV |
소재지 |
EN 61000-4-13:2002
/A2:2016 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
Class 1, 2, 3 |
소재지 |
| EN 61000-4-11:2004/A1:2017 |
Electromagnetic compatibility (EMC)
- Part 4-11: Testing and measurement
techniques
- Voltage dips, short interruptions and voltage variations immunity tests
[Exception]
above 16 A equipment and 3 phase
connection equipment |
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61000-3-3:2013/A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
Voltage: 250 V 16 A (max) |
소재지 |
| EN 61000-3-3:2013 /A1:2019 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
[Exception]
3 phase connection equipment |
Voltage: 250 V 16 A (max) |
소재지 |
| SANS 61000-4-4:2011 |
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
[Exception]
above 16 A equipment and 3 phase
connection equipment |
EFT/Burst: Max ± 4 kV |
소재지 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 1: General requirements |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9814-2:2022 |
전자파적합성(EMC) — 가정용 전기기기,
전동 공구 및 유사기기의 요구사항 ―
제2부: 내성 |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9814-2:2020 |
전자파적합성(EMC) — 가정용 전기기기,
전동 공구 및 유사기기의 요구사항 ―
제2부: 내성 |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9814-2:2017 |
전자파적합성(EMC) — 가정용 전기기기, 전동공구 및 유사기기류의 요구사항 — 제2부: 내성 |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9814-1:2022 |
전자파적합성(EMC) — 가정용 전기기기, 전동 공구 및 유사기기의 요구사항 — 제1부: 방출 |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| KS C 9814-1:2020 |
전자파적합성(EMC) — 가정용 전기기기, 전동 공구 및 유사기기의 요구사항 — 제1부: 방출 |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| KS C 9814-1:2017 |
전자파적합성(EMC) — 가정용 전기기기, 전동공구 및 유사기기의 요구사항 — 제1부: 방출 |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| EN 55014-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55014-1:2017/A11:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| EN 55014-1:2017 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| EN 55014-1:2006/A2:2011 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| EN 55014-1:2006/A1:2009 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| CISPR 14-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| CISPR 14-2:1997/A1:2001 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| CISPR 14-1:2016 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| CISPR 14-1:2005/A2:2011 |
Electromagnetic compatibility - Requirements for Household appliances, electric tools and similar apparatus Part 1:Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| AS/NZS CISPR 14-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| AS/NZS CISPR 14-1:2013 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| AS CISPR 14.1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus, Part 1: Emission (CISPR 14-1:2016 (ED 6.0), MOD) |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use — EMC requirements – Part 1: General requirements |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-1:2012 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-1: Particular requirements Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-3:V2.1.1 (2019-03) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-3:V2.1.1 (2017-03) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic CompatibilityElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-3 V2.3.2 (2023-01) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-24:V1.5.1(2010-10) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable
(UE) radio and ancillary equipment
[Exception]
Radio Frequency, common mode test |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-20 V2.1.1(2019-04) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
Voltage: 250 V 16 A (Max.)
ESD: Max. 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. 4 kV
Surge: Max. 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-20 V1.2.1(2002-11) |
Electromagnetic compatibility
and Radio spectrum matters (ERM);
ElectroMagnetic Compatibility (EMC) standard
for radio equipment and services;
Part 20: Specific conditions for Mobile Earth Stations (MES)
used in the Mobile Satellite Services (MSS) |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-19:V2.1.1(2019-04) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-19:V1.2.1(2002-11) |
Electromagnetic compatibility and Radio
spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio
equipment and services; Part 19: Specific
conditions for Receive Only Mobile Earth
Stations (ROMES) operating in the 1,5 GHz
band providing data communications |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-17:V3.1.1(2017-02) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-52 V1.2.1 (2021-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication
User Equipment (UE) radio and ancillary equipment;
Harmonised Standard for ElectroMagnetic Compatibility
[Exception]
3 phase connection
equipment |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-51 V2.1.1 (2019-04) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 51: Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-51 V1.1.1 (2016-11) |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 51: Specific conditions
for Automotive, Ground
based Vehicles and
Surveillance Radar Devices
using 24,05 GHz to 24,25
GHz, 24,05 GHz to 24,5
GHz, 76 GHz to 77 GHz
and 77 GHz to 81 GHz;
Harmonised Standard
covering the essential
requirements of article
3.1(b) of Directive
2014/53/EU |
Voltage: 250 V 16 A (Max.)
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-34 V2.1.1 (2019-04) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 34: Specific conditions for External Power Supply (EPS) for mobile phones; Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-34 V1.4.1 (2013-05) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-33 V2.2.1 (2019-04) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 33: Specific conditions
for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-5:V2.1.1(2016-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard covering the essential requirements of article 3.1(b) of the Directive 2014/53/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-5:V2.2.1(2019-04) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA);
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301-489-7:V1.5.1(2005-11) |
Electromagnetic compatibility and Radio spectrum Matters(ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)
[Exception]
Radio Frequency, common mode test |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55011:2016+A2:2021 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| EN 55011:2016+A11:2020 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| EN 55011:2016+A1:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment
- Radio frequency disturbance characteristics
- Limits and methods of measurement
[Exception]
5.2.2 In the Table 3a Limits of the magnetic
field induced current in a 2m loop antenna
around the device under test 5.2.2 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| AS/NZS CISPR 11:2024 |
Industrial, scientific and medical radio- frequency equipment - Radio disturbance characteristics - Limits and methods of measurement
[Exception]
5.2.2 In the Table 3a Limits of the magnetic field induced current in a 2m loop antenna around the device under test 5.2.2 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| AS/NZS CISPR 11:2011 |
Industrial, scientific and medical radio- frequency equipment - Radio disturbance characteristics - Limits and methods of measurement
[Exception]
5.2.2 In the Table 3a Limits of the magnetic field induced current in a 2m loop antenna around the device under test 5.2.2 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (CISPR 11:2015+AMD1:2016 (ED.6.1)
[Exception]
5.2.2 In the Table 3a Limits of the magnetic field induced current in a 2m loop antenna around the device under test 5.2.2 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| FCC Part 18:2026 |
Industrial, scientific, and medical equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 18:2024 |
Industrial, scientific, and medical equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 18:2023 |
Industrial, scientific, and medical equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| FCC Part 15 Subpart B:2026 |
Radio frequency devices |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 15 Subpart B:2024 |
Radio frequency devices |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지 |
| FCC Part 15 Subpart B:2023 |
Radio frequency devices |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| KS C 0262:2014 |
전기 자기 적합성(EMC) ― 측정 일반 |
RE: 30 MHz ~ 1 GHz
CE: 150 kHz ~ 30 MHz |
소재지 |
| FCC Part 15:2021 |
Radio frequency devices |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| ETSI EN 303 372-2 V1.2.1 (2021-06) |
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Part 2: Indoor unit;
Harmonised Standard for access to radio spectrum |
Receiver sensitivity
Adjacent channel selectivity
Blocking
Overloading |
소재지 |
| ETSI EN 303 372-2 V1.1.1 (2016-04) |
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Harmonised Standard covering the essential requirements
of article 3.2 of the Directive 2014/53/EU;
Part 2: Indoor unit |
Receiver sensitivity
Adjacent channel selectivity
Blocking
Overloading |
소재지 |
| ETSI EN 303 345 V1.1.7 (2017-03) |
Broadcast Sound Receivers;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Sensitivity
Adjacent channel selectivity and Blocking |
소재지 |
| ETSI EN 303 340 V1.2.1 (2020-09) |
Digital Terrestrial TV Broadcast Receivers;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Adjacent signal selectivity
Dynamic range |
소재지 |
| ETSI EN 303 340 V1.1.2 (2016-09) |
Digital Terrestrial TV Broadcast Receivers;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Adjacent signal selectivity
Dynamic range |
소재지 |
| ETSI EN 301 489-19 V2.2.1 (2022-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard for ElectroMagnetic Compatibility |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-17 V3.2.4 (2020-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-17 V3.3.1 (2024-09) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment – Immunity Requirements
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max. 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. 4 kV
Surge: Max. 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| CISPR 32:2015+AMD1:2019 CSV |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| AS/NZS CISPR 32:2015+AMD1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| AS/NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IS/CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control
and laboratory use - EMC requirements - Part
2-6: Particular requirements - In vitro
diagnostic (IVD) medical equipment |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-4:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-3:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-2:2012 |
Electrical equipment for measurement, control and laboratory use EMC requirements Part 2-2: Particular requirements Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55032:2012/AC:2013 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 55032:2015 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 55032:2015/A1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| ETSI EN 301 489-1:V2.1.1 (2019-03) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard for ElectroMagnetic Compatibility |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-1:V2.1.1 (2017-02) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard covering the essential requirements
of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-1 V2.2.3 (2019-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard for ElectroMagnetic Compatibility |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 300 386 V2.2.1 (2022-09) |
Telecommunication
network equipment Electromagnetic
Compatibility(EMC) requirement; Harmonised Standard covering the essential requirements
of the Directive 2014/30/EU |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 300 386 V2.1.1 (2016-07) |
Telecommunication
network equipment Electromagnetic
Compatibility(EMC) requirement; Harmonised Standard covering the essential requirements
of the Directive 2014/30/EU |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| ETSI EN 300 386 V1.3.3 (2012-09) |
Electromagnetic compatibility and Radio
spectrum matters(ERM): Telecommunication network equipment Electromagnetic Compatibility(EMC) requirement |
Voltage: 250 V 16 A (max)
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz)
EFT/Burst: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| CITC IT005:2010 |
Type: Information Technology Category: Receivers Approval Name: Specification for Receivers Equipment with Internet Support |
9 kHz ~ 18 GHz |
소재지 |
| CITC IT001:2010 |
Type: Information Technology Category: General Approval Name: Specification for IT Equipment |
9 kHz ~ 18 GHz |
소재지 |
| VCCI-CISPR 32:2016 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| SANS 2335:2018 |
Electromagnetic compatibility of multimedia equipment – Immunity Requirements
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max. 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. 4 kV
Surge: Max. 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| SANS 2332:2017 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지 |
| KS C 9835:2019 |
멀티미디어기기 전자파 내성 시험방법
[제외항목]
16 A 이상 시험품 및 3상 결선 시험품 |
ESD: Max 30 kV
RS: Max 10 V/m
(80 MHz ~ 2.7 GHz, 3.5 GHz, 5 GHz)
EFT/Burst: Max 4 kV
Surge: Max 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| KS C 9832:2024 |
멀티미디어기기 전자파적합성 - 방출 요구사항 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| KS C 9832:2023 |
멀티미디어기기 전자파적합성 - 방출 요구사항 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| KS C 9832:2019 |
멀티미디어기기 전자파 장해방지 시험방법 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment – Immunity Requirements
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max. 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz,)
EFT/Burst: Max. 4 kV
Surge: Max. 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment – Immunity Requirements
[Exception]
above 16 A equipment and 3 phase
connection equipment |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz,)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| EN 55032:2015/A11:2020 |
Electromagnetic compatibility of multimedia equipment - Emission Requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| AS/NZS 61000-6-2:2022 |
Electromagnetic compatibility (EMC) Part 6-2: Generic standards — Immunity for industrial environments |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지 |
| AS/NZS 61000-6-2:2006 |
Electromagnetic compatibility (EMC) Part 6-2: Generic standards — Immunity for industrial environments |
ESD: Max. ± 30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ± 4 kV
Surge: Max. ± 6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지 |
| QCVN 86:2019/BTTTT |
National technical regulation on electromagnetic compatibility for mobile terminals and ancillary equipment of digital cellular telecommunication systems [Exception] 3 phase connection
equipment |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지 |
| QCVN 112:2017/BTTTT |
National technical regulation on general electromagnetic compatibility for radio broadband data transmission equipment |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지 |
| QCVN 96:2015/BTTTT |
National technical regulationon electromagnetic compatibilityfor Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지 |
| QCVN 18:2022/BTTTT |
National technical regulation on General Electromagnetic Compatibility for Radio Communications Equipment |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지 |
| QCVN 118:2018/BTTTT |
National technical regulation on Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9814-2:2022 |
전자파적합성(EMC) ― 가정용 전기 기기, 전동 공구 및 유사 기기의 요구 사항 ― 제2부: 내성 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9814-2:2020 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9814-1:2022 |
전자파적합성(EMC) ― 가정용 전기 기기, 전동 공구 및 유사 기기의 요구 사항 ― 제1부: 방출 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KS C 9814-1:2020 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부: 방출 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and
laboratory use – EMC requirements - Part 1:
General requirements |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV(5 kHz, 100 kHz)
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV (5kHz, 100 kHz)
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV(5 kHz, 100 kHz)
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 55014-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 55014-1:2017+A11:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity Product family standard |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| CISPR 14-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 14-1:2016 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1:Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| AS/NZS CISPR 14.1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus, Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| 경찰청표준지침 (2020.03.02) |
LED교통신호등 표준지침
4.5(4)LED모듈의 전기자기장해 [부록] 4 (7) 전자잡음 시험 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz |
소재지-1 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) — 제6-1부: 일반표준 — 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기 [Exception] 12.2.3 냉각 시험 12.2.4 건열(Dry heat) 시험 12.2.5 습열 시험 12.2.9 절연 시험 12.2.10 염분 안개 시험 12.2.11 진동, 충격 및 충돌 시험 12.2.12 방수 시험 12.2.13 기기 스트레스 스크리닝 12.2.14 저기온 충전 시험 |
O.V: (0 ~ 381) V
Surge: ±6 kV
ESD: ±30 kV
Burst: ±4 kV
CS: 150 kHz ~ 230 MHz
RS: 80 MHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
Voltage Variation: V 40 % Variation (1.5 s) F 10 % Variation (5 s)
Dip: (0 ~ 100) % |
소재지-1 |
| KRS SG 0038-14(R) |
한국철도표준규격 무절연가청주파수(AF)궤도회로 (Non-insulated Audio Frequency Track Circuit) 4.5.3 전자파 적합성 시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 1 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.5 GHz
Burst: ±4 kV
Surge: ±4 kV
CS: 150 kHz ~ 80 MHz |
소재지-1 |
| KRCS C229 01:2009 |
한국철도공사규격서 전자연동장치 (Electronic Interlocking System) 4.7 전자파적합성 시험 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.5 GHz
Burst: ±4 kV
Surge : ±4 kV
CS: 150 kHz ~ 80 MHz |
소재지-1 |
| IEC 62236-5:2018 |
Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge : ±4 kV
CS: 150 kHz ~ 80 MHz |
소재지-1 |
| IEC 60571:2012 |
Railway applications - Electronic equipment used on rolling stock [Exception] 12.2.4 Cold start test 12.2.5 Dry heat test 12.2.6 Damp heat test, cyclic 12.2.10 insulation test 12.2.11 Salt mist test 12.2.12 Vibration, shock and bump test 12.2.13 Watertightness test 12.2.14 Equipment stress screening 12.2.15 Low temperature storage test |
O.V: (0 ~ 381) V
Surge: ±6 kV
ESD: ±30 kV
Burst: ±4 kV
CS: 150 kHz ~ 230 MHz
RS: 80 MHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
Voltage Variation: V 40 % Variation (1.5 s) F 10 % Variation (5 s)
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50155:2021 |
Railway applications - Rolling stock - Electronic equipment [Exception] 13.4.4 Low temperature test 13.4.5 Dry heat test 13.4.6 Low temperature storage test 13.4.7 Insulation test 13.4.8 Cylic damp heat test 13.4.10 Shock and vibration test 13.4.11 Stress screening test 13.4.12 Rapid temprature variation test 13.4.13 Salt mist test |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
EFT: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50155:2017 |
Railway applications – Rolling stock - Electronic equipment [Exception] 13.4.4 Low temperature start-up test 13.4.5 Dry heat test 13.4.6 Low temperature storage test 13.4.7 Cyclic damp heat test 13.4.9 Insulation test 13.4.10 Salt mist test 13.4.11 Vibration and shock test 13.4.12 Enclosure protection test(IP code) 13.4.13 Stress screening test 13.4.14 Rapid Temperature variation test |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
EFT: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50121-5:2017+A1:2019 |
Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50121-5:2017 |
Railway applications – Electromagnetic compatibility – Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50121-4:2016+A1:2019 |
Railway applications - Electromagnetic Compatibility - Part 4: Emission and Immunity of the signalling and telecommunications apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50121-4:2016 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50121-3-2:2016+A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
EFT: ±4 kV Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 50121-3-2:2016 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
EFT: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) —제 6-3부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방출 표준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KS C IEC 62236-3-2:2018 |
철도용 전기자기적합성 ― 제3-2부: 철도차량 ― 장치 |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 62236-4:2006 |
철도용 전기자기적합성 ― 제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 3 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KN 60945_60533:2015 |
해상업무용 무선설비-항해기기 및 선박용 전기전자기기 전자파적합성 시험방법 |
CE: 10 kHz ~ 30 MHz
RE: 150 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| KS X IEC 60945:2002 |
해상 항해, 무선통신 기기 및 시스템 ― 일반 요구사항 ― 시험 방법과 요구되는 시험결과 7. 전원공급 - 시험 방법과 요구되는 시험결과 9. 전자파 방출 - 시험 방법 및 요구되는 시험 결과(4.5.1 참조) 10. 전자파 환경의 내성 - 시험 방법 및 요구되는 시험 결과 |
CE: 10 kHz ~ 30 MHz
RE: 150 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s) |
소재지-1 |
| IEC 60945:2002 COR1:2008 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results 7 Power Supply - Methods of testing and required test results 9 Electromagnetic emission - Methods of testing and required test results 10 Immunity to electromagnetic environment - Methods of testing and required test results |
CE: 10 kHz ~ 30 MHz
RE: 150 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s) |
소재지-1 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results 7 Power Supply - Methods of testing and required test results 9 Electromagnetic emission - Methods of testing and required test results 10 Immunity to electromagnetic environment - Methods of testing and required test results |
CE: 10 kHz ~ 30 MHz
RE: 150 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s) |
소재지-1 |
| RTCA/DO-160G:2010 |
Environmental Conditions and Test Procedures for Airborne Equipment Section 22 Lightning Induced Transient Susceptibility Section 25 Electrostatic Discharge |
Section 22: Level 3 Waveform 1, 2, 3, 4, 5A, 5B, 6, MS, MB
Section 25: ±15 kV |
소재지-1 |
| RTCA/DO-160F:2007 |
Environmental Conditions and Test Procedures for Airborne Equipment Section 25 Electrostatic Discharge |
±15 kV |
소재지-1 |
| KS C IEC 60255-5:2013 |
계전기-파트 5 : 측정 계전기 및 보호기기의 절연협조—요구조건 및 시험 |
Max. 8 kV |
소재지-1 |
| IEC 60255-5:2000 |
Electrical relays – Part 5: Insulation coordination for measuring relays and protection equipment – Requirements and tests |
Max. 8 kV |
소재지-1 |
| IEC 60255-22-7:2003 |
Electrical relays – Part 22-7:Electrical disturbance tests for measuring relays and protection equipment – Power frequency immunity tests |
DM: 150 V
CM: 300 V |
소재지-1 |
| EN 60255-22-7:2003 |
Electrical relays – Part 22-7:Electrical disturbance tests for measuring relays and protection equipment – Power frequency immunity tests |
DM: 150 V
CM: 300 V |
소재지-1 |
| KS C IEC 62236-5:2018 |
철도용 전기자기적합성 ― 제5부: 고정 전력공급 설비와 장치의 방출 및 내성 |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 62236-5:2006 |
철도용 전기자기적합성 ― 제5부: 고정 전력공급 설비와 장치의 방출 및 내성 |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 62236-4:2018 |
철도용 전기자기적합성 ― 제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic : 300 A/m
Pulse Magnetic : 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 60255-26:2013 |
전기 계전기 - 제26부: 전자기적합성 요구 사항 |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.7 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) %
Damped oscillatory wave: 4 kV
CLFI: 50 Hz ~ 150 kHz
Gradual shut down / start-up tests: (0 ~ 381) V |
소재지-1 |
| IEC 60255-26:2023 |
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.7 GHz
Burst: ±4 kV Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) %
Damped oscillatory wave: 4 kV CLFI: 50 Hz ~ 150 kHz
Gradual shut down / start-up tests: (0 ~ 381) V |
소재지-1 |
| IEC 60255-26:2013 |
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.7 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) %
Damped oscillatory wave: 4 kV
CLFI: 50 Hz ~ 150 kHz
Gradual shut down / start-up tests: (0 ~ 381) V |
소재지-1 |
| EN 60255-26:2013/AC:2013 |
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.7 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) %
Damped oscillatory wave: 4 kV
CLFI: 50 Hz ~ 150 kHz
Gradual shut down / start-up tests: (0 ~ 381) V |
소재지-1 |
| EN 60255-26:2013 |
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.7 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) %
Damped oscillatory wave: 4 kV
CLFI: 50 Hz ~ 150 kHz
Gradual shut down / start-up tests: (0 ~ 381) V |
소재지-1 |
| EN IEC 60255-26:2025 |
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) %
Damped oscillatory wave: 4 kV
CLFI: 50 Hz ~ 150 kHz
Gradual shut down / start-up tests: (0 ~ 381) V |
소재지-1 |
| EN 55013:2013+A1:2016 |
Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics -Limits and methods of measurement |
CE: 9 kHz - 30 MHz
RE: 9 kHz - 18 GHz
Disturbance voltage: 9 kHz - 2.15 GHz
Radiated Power: 9 kHz - 18 GHz |
소재지-1 |
| CISPR 13:2009+A1:2015 |
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz - 30 MHz
RE: 9 kHz - 18 GHz
Disturbance voltage: 9 kHz - 2.15 GHz
Radiated Power: 9 kHz - 18 GHz |
소재지-1 |
| AS/NZS CISPR 13:2012+A1:2015 |
Sound and television broadcast receivers and associated equipment -Radio disturbance characteristics -Limits and methods of measurement |
CE: 9 kHz - 30 MHz
RE: 9 kHz - 18 GHz
Disturbance voltage: 9 kHz - 2.15 GHz
Radiated Power: 9 kHz - 18 GHz |
소재지-1 |
| FCC Part 18:2024 |
Industrial, scientific, and medical equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| FCC Part 18:2026 |
Industrial, scientific, and medical equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| FCC Part 15 Subpart B:2024 |
PART 15-RADIO FREQUENCY DEVICES |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| FCC Part 15 Subpart B:2026 |
PART 15-RADIO FREQUENCY DEVICES |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| ETSI EN 301 489-3:V2.1.1 (2019-03) |
Electromagnetic compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| ETSI EN 301 489-3 v2.3.2 (2023-01) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| ETSI EN 301 489-24:V1.5.1 (2010-10) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| AS CISPR 11:2017/AMD1:2020 |
Industrial, scientific and medical equipment-Radio-frequency disturbance characteristics-Limits and methods of measurement [Exception] 방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| AS/NZS CISPR 11:2024 |
Industrial, scientific and medical equipment-Radio-frequency disturbance characteristics-Limits and methods of measurement [Exception] 방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 11:2015+A2:2019 |
Industrial, scientific and medical equipment - Radio - frequency disturbance characteristics - Limits and methods of measurement [Exception] 방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KOSHA GUIDE W-95-2011:2011 |
산업용설비에서의 전자파적합성에 관한 기술기준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61000-6-4:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 61000-6-2:2005 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| AS/NZS 61000.6.2:2022 |
Electromagnetic compatibility (EMC), Part 6.2: Generic standards - Immunity standard for industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| AS 61000.6.4:2020 |
Electromagnetic compatibility (EMC), Part 6.4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 — 무선 주파수 방해 특성 — 허용기준 및 측정방법 [Exception] 방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 55011:2016/A2:2021 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN IEC 55011:2025 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement [Exception] 방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement [Exception] 방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| ETSI EN 301 489-17 V3.3.1 (2024-09) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| ETSI EN 301 489-17 V3.2.4 (2020-09) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| MIL-STD-704F:2004 |
DEPARTMENT OF DEFENSE INTERFACE STANDARD AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
GENERAL REQUIREMENTS |
소재지-1 |
| MIL-STD-462D:1993 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS CE101 CONDUCTED EMISSIONS, POWER LEADS, 30 Hz TO 10 kHz CE102 CONDUCTED EMISSIONS, POWER LEADS, 10 kHz TO 10 MHz CE106 CONDUCTED EMISSIONS, ANTENNA TERMINAL, 10 kHz TO 40 GHz CS101 CONDUCTED SUSCEPTIBILITY, POWER LEADS, 30 Hz TO 50 kHz CS103 CONDUCTED SUSCEPTIBILITY, ANTENNA PORT, INTERMODULATION, 15 kHz to 10 GHz CS104 CONDUCTED SUSCEPTIBILITY, ANTENNA PORT, REJECTION OF UNDESIRED SIGNALS, 30 Hz to 20 GHz CS105 CONDUCTED SUSCEPTIBILITY, ANTENNA PORT, CROSS MODULATION, 30 Hz to 20 GHz CS114 CONDUCTED SUSCEPTIBILITY, BULK CABLE INJECTION, 10 kHz TO 400 MHz CS115 CONDUCTED SUSCEPTIBILITY, BULK CABLE INJECTION, IMPULSE EXCITATION CS116 CONDUCTED SUSCEPTIBILITY, DAMPED SINUSOIDAL TRANSIENTS, CABLES AND POWER LEADS, 10 kHz TO 100 MHz RE101 RADIATED EMISSIONS, MAGNETIC FIELD, 30 Hz TO 100 kHz RE102 RADIATED EMISSIONS, ELECTRIC FIELD, 10 kHz TO 18 GHz RS101 RADIATED SUSCEPTIBILITY, MAGNETIC FIELD, 30 Hz TO 100 kHz RS103 RADIATED SUSCEPTIBILITY, ELECTRIC FIELD, 10 kHz TO 18 GHz |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CE106: 10 kHz ~ 40 GHz
CS101: 30 Hz ~ 50 kHz
CS103: 15 kHz ~ 10 GHz
CS104: 30 Hz ~ 20 GHz
CS105: 30 Hz ~ 20 GHz
CS114: 10 kHz ~ 400 MHz
CS115: Impulse 5 A
CS116: 10 kHz ~ 100 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 18 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 18 GHz Exception: 2 MHz to 100 MHz, 200 V/m |
소재지-1 |
| MIL-STD-461G:2015 |
DEPARTMENT OF DEFENSE INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT 5.4 CE101, conducted emissions, audio frequency currents, power leads. 5.5 CE102, conducted emissions, radio frequency potential, power leads. 5.6 CE106, conducted emissions, antenna port. 5.7 CS101, conducted susceptibility, power leads. 5.8 CS103, conducted susceptibility, antenna port, intermodulation. 5.9 CS104, conducted susceptibility, antenna port, rejection of undesired signals. 5.10 CS105, conducted susceptibility, antenna port, cross modulation. 5.12 CS114, conducted susceptibility, bulk cable injection. 5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation. 5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads. 5.15 CS117, conducted susceptibility, lightning induced transients, cables and power leads 5.16 CS118, personnel borne electrostatic discharge. 5.17 RE101, radiated emissions, magnetic field. 5.18 RE102, radiated emissions, electric field. 5.20 RS101, radiated susceptibility, magnetic field. 5.21 RS103, radiated susceptibility, electric field. |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CE106: 10 kHz ~ 40 GHz
CS101: 30 Hz ~ 150 kHz
CS103: 15 kHz ~ 10 GHz
CS104: 30 Hz ~ 20 GHz
CS105: 30 Hz ~ 20 GHz
CS114: 4 kHz ~ 200 MHz
CS115: Impulse 5 A
CS116: 10 kHz ~ 100 MHz
CS117: Internal Equipment Levels Waveform 1, 2, 3, 4, 5A, 6, MS, MB CS118: Air ±15 kV Contact ±8 kV
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 18 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 2 MHz ~ 18 GHz Exception: 2 MHz to 100 MHz, 200 V/m |
소재지-1 |
| MIL-STD-461F:2007 |
DEPARTMENT OF DEFENSE INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT 5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz. 5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz. 5.6 CE106, conducted emissions, antenna terminal, 10 kHz to 40 GHz. 5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz. 5.8 CS103, conducted susceptibility, antenna port, intermodulation, 15 kHz to 10 GHz. 5.9 CS104, conducted susceptibility, antenna port, rejection of undesired signals, 30 Hz to 20 GHz. 5.10 CS105, conducted susceptibility, antenna port, cross modulation, 30 Hz to 20 GHz. 5.11 CS106, conducted susceptibility, transients, power leads. 5.13 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz. 5.14 CS115, Conducted susceptibility, bulk cable injection, impulse excitation. 5.15 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads, 10 kHz to 100 MHz. 5.16 RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz. 5.17 RE102, radiated emissions, electric field, 10 kHz to 18 GHz. 5.19 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz. 5.20 RS103, radiated susceptibility, electric field, 2 MHz to 18 GHz. |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CE106: 10 kHz ~ 40 GHz
CS101: 30 Hz ~ 150 kHz
CS103: 15 kHz ~ 10 GHz
CS104: 30 Hz ~ 20 GHz
CS105: 30 Hz ~ 20 GHz
CS106: 400 Vpeak
CS114: 4 kHz ~ 200 MHz
CS115: Impulse 5 A
CS116: 10 kHz ~ 100 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 18 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 2 MHz ~ 18 GHz Exception: 2 MHz to 100 MHz, 200 V/m |
소재지-1 |
| MIL-STD-461E:1999 |
DEPARTMENT OF DEFENSE INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT 5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz. 5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz. 5.6 CE106, conducted emissions, antenna terminal, 10 kHz to 40 GHz. 5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz. 5.8 CS103, conducted susceptibility, antenna port, intermodulation, 15 kHz to 10 GHz. 5.9 CS104, conducted susceptibility, antenna port, rejection of undesired signals, 30 Hz to 20 GHz. 5.10 CS105, conducted susceptibility, antenna port, cross modulation, 30 Hz to 20 GHz. 5.12 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz. 5.13 CS115, Conducted susceptibility, bulk cable injection, impulse excitation. 5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads, 10 kHz to 100 MHz. 5.15 RE101, Radiated emissions, magnetic field, 30 Hz to 100 kHz. 5.16 RE102, radiated emissions, electric field, 10 kHz to 18 GHz. 5.18 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz. 5.19 RS103, radiated susceptibility, electric field, 2 MHz to 18 GHz. |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CE106: 10 kHz ~ 40 GHz
CS101: 30 Hz ~ 150 kHz
CS103: 15 kHz ~ 10 GHz
CS104: 30 Hz ~ 20 GHz
CS105: 30 Hz ~ 20 GHz
CS114: 10 kHz ~ 200 MHz
CS115: Impulse 5 A
CS116: 10 kHz ~ 100 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 18 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 2 MHz ~ 18 GHz Exception: 2 MHz to 100 MHz, 200 V/m |
소재지-1 |
| MIL-STD-461D:1993 |
MILITARY STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE EMISSIONS AND SUSCEPTIBILITY 5.3.1 CE101 (Conducted emissions, power leads, 30 Hz to 10 kHz) 5.3.2 CE102 (Conducted emissions, power leads, 10 kHz to 10 MHz) 5.3.3 CE106 (Conducted emissions, antenna terminal ,10 kHz to 40 GHz) 5.3.4 CS101 (Conducted susceptibility, power leads, 30 Hz to 50 kHz) 5.3.5 CS103 (Conducted susceptibility, antenna port, intermodulation, 15 kHz to 10 GHz) 5.3.6 CS104 (Conducted susceptibility, antenna port, rejection of undesired signals, 30 Hz to 20 GHz) 5.3.7 CS105 (Conducted susceptibility, antenna port, cross modulation, 30 Hz to 20 GHz) 5.3.9 CS114 (Conducted susceptibility, bulk cable injection, 10 kHz to 400 MHz) 5.3.10 CS115 (Conducted susceptibility, bulk cable injection, impulse excitation) 5.3.11 CS116 (Conducted susceptibility, damped sinusoidal transients, cables and power leads, 10 kHz to 100 MHz) 5.3.12 RE101 (Radiated emissions, magnetic field, 30Hz to 100 kHz) 5.3.13 RE102 (Radiated emissions, electric field, 10 kHz to 18 GHz) 5.3.15 RS101 (Radiated susceptibility, magnetic field, 30 Hz to 100 kHz) 5.3.16 RS103 (Radiated susceptibility, electric field, 10 kHz to 18 GHz) |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CE106: 10 kHz ~ 40 GHz
CS101: 30 Hz ~ 50 kHz
CS103: 15 kHz ~ 10 GHz
CS104: 30 Hz ~ 20 GHz
CS105: 30 Hz ~ 20 GHz
CS114: 10 kHz ~ 400 MHz
CS115: Impulse 5 A
CS116: 10 kHz ~ 100 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 18 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 18 GHz Exception: 2 MHz to 100 MHz, 200 V/m |
소재지-1 |
| MIL-PRF-28800F:1996 |
TEST EQUPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR TABLE 6. Test equipment EMC requirements. |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
RS: 80 MHz ~ 1 GHz
Burst: ±1 kV
CS: 150 kHz ~ 80 MHz |
소재지-1 |
| MIL-HDBK-704-8:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS 28 VDC ( PART 8 OF 8 PARTS ) |
LDC101: must be defined in the utilization equipment performance specification document
LDC102: (22 ~ 29) V
LDC103: Max. 1 V
LDC104: 1.5 V (PK to AV)
LDC105: (18 ~ 50) V
LDC201: (22 ~ 29) V
LDC301: (20 ~ 31.5) V
LDC302: Max. 50 V
LDC401: (18 ~ 29) V
LDC501: (12 ~ 29) V
LDC601: 100 ms ~ 7 s
LDC602: Phase Reversal |
소재지-1 |
| MIL-HDBK-704-7:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS 270 VDC ( PART 7 OF 8 PARTS ) |
HDC101: must be defined in the utilization equipment performance specification document
HDC102: (250 ~ 280) V
HDC103: Max. 3.162 V
HDC104: 6 V (PK to AV)
HDC105: (200 ~ 330) V
HDC201: (250 ~ 280) V
HDC301: (240 ~ 290) V
HDC302: Max. 350 V
HDC401: (250 ~ 280) V
HDC501: (115 ~ 280) V
HDC601: 100 ms ~ 7 s
HDC602: Phase Reversal |
소재지-1 |
| MIL-HDBK-704-6:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, 60 Hz, 115 VOLT ( PART 6 OF 8 PARTS ) |
SXF101: Single Phase 0.5 kVA
SXF102: (105 ~ 125) V, (59.5 ~ 60.5) Hz
SXF104: Max. 2.5 V SXF105: 0.5 Hz
SXF106: 50 Hz ~ 10 kHz, Max. 3.162 V
SXF107: Voltage Distortion Factor 0.05
SXF108: ±0.10 V
SXF109: (31 ~ 152) V
SXF110: (50 ~ 61) Hz
SXF201: (105 ~ 125) V
SXF301: (100 ~ 128) V, (59.5 ~ 60.5) Hz
SXF302: Max. 180 V
SXF303: (50 ~ 61) Hz
SXF401: (105 ~ 125) V, (59.5 ~ 60.5) Hz
SXF601: 100 ms ~ 2 s
SXF603: Phase Reversal |
소재지-1 |
| MIL-HDBK-704-5:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS THREE PHASE, VARIABLE FREQUENCY, 115 VOLT ( PART 5 OF 8 PARTS ) |
TVF101: Inrush Current 300 % for Loads > 3 kVA, Percent Unbalanced Load 3.33 % for Loads > 30 kVA
TVF102: (108 ~ 118) V, (360 ~ 800) Hz, Voltage Unbalance 3.0 V
TVF103: 116° to 124°
TVF104: Max. 2.5 V
TVF105: 4 Hz
TVF106: 50 Hz ~ 10 kHz, Max. 3.160 V
TVF107: Voltage Distortion Factor 0.05
TVF108: ±0.10 V
TVF109: (80 ~ 180) V
TVF110: (360 ~ 800) Hz
TVF201: (108 ~ 118) V
TVF301: (100 ~ 125) V, (360 ~ 800) Hz
TVF302: Max. 180 V
TVF303: (360 ~ 800) Hz
TVF401: (108 ~ 118) V, (360 ~ 800) Hz
TVF601: 100 ms ~ 7 s
TVF602: 7 s and indefinitely
TVF603: Phase Sequence Reversal |
소재지-1 |
| MIL-HDBK-704-4:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, VARIABLE FREQUENCY, 115 VOLT ( PART 4 OF 8 PARTS ) |
SVF101: Single Phase 0.5 kVA
SVF102: (108 ~ 118) V, (393 ~ 407) Hz
SVF104: Max. 2.5 V
SVF105: 4 Hz
SVF106: 50 Hz ~ 10 kHz, Max. 3.160 V
SVF107: Voltage Distortion Factor 0.05
SVF108: ±0.10 V
SVF109: (80 ~ 180) V
SVF110: (360 ~ 800) Hz
SVF201: (108 ~ 118) V
SVF301: (100 ~ 125) V, (360 ~ 800) Hz
SVF302: Max. 180 V
SVF303: (360 ~ 800) Hz
SVF401: (108 ~ 118) V, (360 ~ 800) Hz
SVF601: 100 ms ~ 7 s
SVF603: Phase Sequence Reversal |
소재지-1 |
| MIL-HDBK-704-3:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS THREE PHASE, 400 Hz, 115 VOLT ( PART 3 OF 8 PARTS ) |
TAC101: Inrush Current 300 % for Loads > 3 kVA, Percent Unbalanced Load 3.33 % for Loads > 30 kVA
TAC102: (108 ~ 118) V, (393 ~ 407) Hz, Voltage Unbalance 3.0 V
TAC103: 116° ~ 124°
TAC104: Max. 2.5 V
TAC105: 4 Hz
TAC106: 50 Hz ~ 10 kHz, Max. 3.160 V
TAC107: Voltage Distortion Factor 0.05
TAC108: ±0.10 V
TAC109: (80 ~ 180) V
TAC110: (375 ~ 425) Hz
TAC201: (108 ~ 118) V
TAC301: (100 ~ 125) V, (380 ~ 420) Hz
TAC302: Max. 180 V TAC303: (320 ~ 480) Hz
TAC401: (108 ~ 118) V, (393 ~ 407) Hz
TAC601: 100 ms ~ 7 s
TAC602: 7 s and indefinitely
TAC603: Phase Sequence Reversal |
소재지-1 |
| MIL-HDBK-704-2:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS SINGLE PHASE, 400 Hz, 115 VOLT ( PART 2 OF 8 PARTS ) |
SAC101: Single Phase 0.5 kVA
SAC102: (108 ~ 118) V, (393 ~ 407) Hz
SAC104: Max. 2.5 V
SAC105: 4 Hz
SAC106: 50 Hz ~ 10 kHz, Max. 3.160 V
SAC107: Voltage Distortion Factor 0.05
SAC108: ±0.10 V
SAC109: (80 ~ 180) V
SAC110: (375 ~ 425) Hz
SAC201: (108 ~ 118) V
SAC301: (100 ~ 125) V, (380 ~ 420) Hz
SAC302: Max. 180 V
SAC303: (320 ~ 480) Hz
SAC401: (108 ~ 118) V, (393 ~ 407) Hz
SAC601: 100 ms ~ 7 s
SAC603: Phase Reversal |
소재지-1 |
| MIL-HDBK-704-1:2004 |
GUIDANCE FOR TEST PROCEDURES FOR DEMONSTRATION OF UTILIZATION EQUIPMENT COMPLIANCE TO AIRCRAFT ELECTRICAL POWER CHARACTERISTICS ( PART 1 OF 8 PARTS ) |
GENERAL INFORMATION |
소재지-1 |
| IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| ES-0000-0002:2014 |
한전표준규격ES(Technical Standards of KEPCO) 전자기적합성 시험 일반(General Test for Electromagnetic compatibility) |
CE: 150 kHz ~ 30 MHz RE: 30 MHz ~ 18 GHz ESD: ±30 kV RS: 80 MHz ~ 6 GHz Burst: ±4 kV Surge: ±6 kV CS: 10 kHz ~ 230 MHz Magnetic : 300 A/m(Continuous), 1 000 A/m(Shot) Impulse Magnetic : 1 000 A/m Damped oscillatory magnetic: 100 A Dip: (0 ~ 100) % Ring wave : ±6 kV CCMD: (0 to 150) kHz 30 V(Continuous), 300 V(Shot) Ripple: dc 500 V Damped oscillatory wave: (100 kHz, 1 MHz), 4 kV LFCS: (2 to 150) kHz, 20 V DC Dip: 500 V Impulse Voltage Test: ±8 kV Interhamonics: I ≤ 32 A |
소재지-1 |
| GS-5830-0015:2017 |
한전일반구매규격GS(General Technical Specifications of KEPCO) SCADA 다기능 원격소 장치(SCADA Multi-function Remote Terminal Unit) |
CE: 150 kHz ~ 30 MHz RE: 30 MHz ~ 18 GHz ESD: ±30 kV RS: 80 MHz ~ 6 GHz Burst: ±4 kV Surge: ±6 kV CS: 10 kHz ~ 230 MHz Magnetic : 300 A/m(Continuous), 1 000 A/m(Shot) Dip: (0 ~ 100) % Impulse Voltage Test: ±8 kV |
소재지-1 |
| ETSI EN 301 489-1 V2.2.3 (2019-11) |
Electromagnetic compatibility (EMC) standard for radio equipment and service; Part 1 : Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9832:2023 |
멀티미디어기기 전자파적합성 - 방출 요구사항 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KS C 9832:2024 |
멀티미디어기기 전자파적합성 - 방출 요구사항 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KN 35:2015 |
멀티미디어기기 전자파 내성 시험방법 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KN 32:2015 |
멀티미디어기기 전자파 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 55032:2015/A11:2020 |
Electromagnetic compatibility of multimedia equipment – Emission Requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 55032:2015/A1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment – Emission Requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| AS/NZS CISPR 32:2015+A1:2020 |
Electromagnetic compatibility of multimedia equipment–Emission Requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| AS/NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission Requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| IS/CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| GS-6110-0094:2017 |
한전일반구매규격GS(General Technical Specifications of KEPCO) 154kV 디지털변전소 운영시스템(154kV Substation Automation Operating System) |
CE: 150 kHz ~ 30 MHz RE: 30 MHz ~ 18 GHz ESD: ±30 kV RS: 80 MHz ~ 6 GHz Burst: ±4 kV Surge: ±6 kV CS: 10 kHz ~ 230 MHz Magnetic : 300 A/m(Continuous), 1 000 A/m(Shot) Dip: (0 ~ 100) % Impulse Voltage Test: ±8 kV |
소재지-1 |
| GS-5895-0004:2017 |
한전일반구매규격GS(General Technical Specifications of KEPCO) 고압고객용 원격검침 무선모뎀(Wireless Modem for Automatic Meter Reading) |
CE: 150 kHz ~ 30 MHz RE: 30 MHz ~ 18 GHz ESD: ±30 kV RS: 80 MHz ~ 6 GHz Burst: ±4 kV Surge: ±6 kV CS: 10 kHz ~ 230 MHz Damped oscillatory magnetic: 100 A Dip: (0 ~ 100) % Ring wave : ±6 kV Impulse Voltage Test: ±8 kV |
소재지-1 |
| KS C 9610-6-2:2017 |
전자파적합성(EMC) — 제6-2부: 일반기준 — 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) — 제6-2부: 일반표준 — 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KN 60601-1-2:2008 |
의료용 전기기기류 내성 시험방법 - 요구사항 및 시험방법 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 60601-1-2:2014 |
의료용 전기기기 ─ 제1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항 ─ 보조표준: 전자파 장해 ─ 요구사항 및 시험 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| Addendum 9 – UN Regulation No. 10 Revision 6:2019 |
Electromagnetic compatibility [Exception] vehicles 4.2. TEM cell testing 4.4. and 4.5 Stripline testing |
RE: 30 MHz ~ 1 GHz
RI: 20 MHz ~ 2 GHz
BCI: 20 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System
CE(AC) : 9 kHz ~ 30 MHz
CE(DC) : 9 kHz ~ 30 MHz
CE(Network) : 9 kHz ~ 30 MHz
harmonics and Flick(≤ 16 A) harmonics and Flick(> 16 A) |
소재지-1 |
| Addendum 9:Regulation No. 10 Revision 3:2008 |
UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO ELECTROMAGNETIC COMPATIBILITY [Exception] vehicles 4.2. TEM cell testing 4.4. and 4.5 Stripline testing |
RE: 30 MHz ~ 1 GHz
RI: 20 MHz ~ 2 GHz
BCI: 20 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지-1 |
| Addendum 9:Regulation No. 10 Revision 4:2012 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility [Exception] vehicles 4.2. TEM cell testing 4.4. and 4.5 Stripline testing |
RE: 30 MHz ~ 1 GHz
RI: 20 MHz ~ 2 GHz
BCI: 20 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지-1 |
| Addendum 9:Regulation No. 10 Revision 5:2014 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility [Exception] vehicles 4.2. TEM cell testing 4.4. and 4.5 Stripline testing |
RE: 30 MHz ~ 1 GHz
RI: 20 MHz ~ 2 GHz
BCI: 20 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지-1 |
| CISPR 12:2007+A1:2009 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers [Exception] 5.3.2 Vehicles and Motor Boats 5.3.3 Device |
CE: 100 kHz ~ 30 MHz
RE: 100 kHz ~ 18 GHz |
소재지-1 |
| CISPR 25:2016 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers [Exception] 6.6 Radiated emission from components/modules-TEM cell method 6.7 Radiated emission from components/modules-Stripline method |
CE(Power Line): 150 kHz ~ 108 MHz
CE(Signal Line): 150 kHz ~ 245 MHz
RE: 150 kHz ~ 2.5 GHz |
소재지-1 |
| CISPR 25:2021 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers [Exception] 6.6 Radiated emission from components/modules-Stripline method |
CE(Power Line): 150 kHz ~ 108 MHz
CE(Signal Line): 150 kHz ~ 245 MHz
RE: 150 kHz ~ 6 GHz |
소재지-1 |
| EN 13309:2010 |
Construction machinery — Electromagnetic compatibility of machines with internal power supply [Exception] 4.2 Specifications concerning broadband electromagnetic emission radiated from construction machinery 4.3 Specifications concerning narrowband electromagnetic emission radiated from construction machinery 4.4 Specifications concerning the immunity of construction machinery to electromagnetic radiation 4.7.2 - Stripline Test - TEM Cell Test |
RE: 30 MHz ~ 1 GHz
RI: 20 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz
ESD: ±(4 ~ 25) kV
CTE: 12 V, 24 V System
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5 |
소재지-1 |
| EN 50498:2010 |
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles |
RE: 30 MHz ~ 1 GHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지-1 |
| ES 96200-00/16th:2017 |
기술 표준 ENGINEERING STANDARD 기술 규격 ENGINEERING SPECIFICATION ELECTROMAGNETIC COMPATIBILITY |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 3 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (146/222/444) MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V System ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz
CE(AC Power): 0.15 MHz ~ 30 MHz
CE(Telecommunication Port): 0.15 MHz ~ 30 MHz
Harmonic Current Emission: Rated current: ≤16 A
Voltage Fluctuation and Flicker: Rated current: ≤16 A
Burst: ±4 kV
Surge: ±6 kV |
소재지-1 |
| ES 96200-00/17th:2017 |
기술 표준 ENGINEERING STANDARD 기술 규격 ENGINEERING SPECIFICATION ELECTROMAGNETIC COMPATIBILITY |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 20 MHz ~ 3 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (146/222/444) MHz
Portable transmitters: 146 MHz ~ 5.925 GHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz
CE(AC Power): 0.15 MHz ~ 30 MHz
CE(Telecommunication Port): 0.15 MHz ~ 30 MHz
Harmonic Current Emission: Rated current: ≤16 A
Voltage Fluctuation and Flicker: Rated current: ≤16 A
Burst: ±4 kV
Surge: ±6 kV |
소재지-1 |
| ES 96200-00/G:2008 |
기술 표준 ENGINEERING STANDARD 기 술 규 격 ELECTROMAGNETIC COMPATIBILITY SPECIFICATION [Exception] 4.3.3.2 TEM cell testing 4.3.3.4 Stripline testing |
RE: 0.15 MHz ~ 2.5 GHz
CE(Power Line): 150 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 2 GHz
BCI: 20 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
CTI: (-150 ~ 100) V
CTE: (-100 ~ 75) V
ESD: ±(4 ~ 25) kV |
소재지-1 |
| ES 96200-00/K:2011 |
기술 표준 ENGINEERING STANDARD 기 술 규 격 ELECTROMAGNETIC COMPATIBILITY SPECIFICATION [Exception] 4.3.3.2 TEM cell testing 4.3.3.4 Stripline testing |
RE: 0.1 MHz ~ 2.5 GHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 2 GHz
BCI: 20 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (144/222/445) MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV |
소재지-1 |
| ES 96200-00/L:2014 |
기술 표준 ENGINEERING STANDARD 기 술 규 격 ELECTROMAGNETIC COMPATIBILITY SPECIFICATION [Exception] 4.3.3.2 TEM cell testing 4.3.3.4 Stripline testing |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 3.2 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (144/222/445) MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V System ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz |
소재지-1 |
| ES 96200-00/O:2016 |
기술 표준 ENGINEERING STANDARD 기 술 규 격 ELECTROMAGNETIC COMPATIBILITY SPECIFICATION |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 3 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (146/222/444) MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz
CE(AC Power): 0.15 MHz ~ 30 MHz
CE(Telecommunication Port): 0.15 MHz ~ 30 MHz
Harmonic Current Emission: Rated current: ≤16 A
Voltage Fluctuation and Flicker: Rated current: ≤16 A
Burst: ±4 kV
Surge: ±6 kV |
소재지-1 |
| ES 96202-01:2014 |
기술 표준 ENGINEERING STANDARD 기 술 규 격 ENGINEERING SPECIFICATION ELECTROMAGNETIC COMPATIBILITY SPECIFICATION (24V) [Exception] - Strip line Method - TEM Cell Method - Wideband TEM Cell Method |
RE: 0.1 MHz ~ 2.5 GHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b
CTE: 24 V System
ESD: ±(4 ~ 25) kV |
소재지-1 |
| ISO 10605:2023 |
Road vehicles -- Test methods for electrical disturbances from electrostatic discharge |
±(0.2 ~ 30) kV |
소재지-1 |
| ISO 11452-1:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General principles and terminology |
General |
소재지-1 |
| ISO 11452-2:2019 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure |
80 MHz ~ 18 GHz |
소재지-1 |
| ISO 11452-4:2011 |
Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Harness excitation methods [Exception] 6.2 TWC test method |
1 MHz ~ 400 MHz, 200 mA |
소재지-1 |
| ISO 11452-4:2020 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods [Exception] 6.2 TWC test method |
0.1 MHz ~ 400 MHz, 200 mA |
소재지-1 |
| ISO 11452-8:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields [Exception] 6.4 Helmholtz coil method |
DC: 3 000 A/m 15 Hz ~ 150 kHz: 1 000 A/m |
소재지-1 |
| ISO 11452-9:2021 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters |
26 MHz ~ 6 GHz |
소재지-1 |
| ISO 16750-2:2012 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment -Part2: Electrical loads |
12 V and 24 V system |
소재지-1 |
| ISO 16750-2:2023 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment -Part2: Electrical loads |
12 V and 24 V system |
소재지-1 |
| ISO 7637-1:2015 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
General |
소재지-1 |
| ISO 7637-2:2004+A1:2008 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
12 V and 24 V system |
소재지-1 |
| IEC 60601-1-2:2014/AMD1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 60601-1-2:2015 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| REGULATORY GUIDE 1.180:2003 |
GUIDELINES FOR EVALUATING ELECTROMAGNETIC AND RADIO-FREQUENCY INTERFERENCE IN SAFETY-RELATED INSTRUMENTATION AND CONTROL SYSTEMS 3.1 CE101-Conducted Emissions, Low Frequency 3.2 CE102-Conducted Emissions, High Frequency 3.3 RE101-Radiated Emissions, Magnetic Field 3.4 RE102-Radiated Emissions, Electric Field 3.5 IEC Emissions Tests 4.1.1 CS101-Conducted Susceptibility, Low Frequency 4.1.2 CS114-Conducted Susceptibility, High Frequency 4.1.3 IEC Conducted Susceptibility Tests- Power Leads 4.2 EMI/RFI Conducted Susceptibility Testing-Signal Leads 4.3.1 RS101-Radiated Susceptibility, Magnetic Fields 4.3.2 RS103-Radiated Susceptibility, Electric Fields 4.3.3 IEC Radiated Susceptibility Tests 5.1 IEEE C62.41 Ring Wave and IEC 61000-4-12 5.2 IEEE C62.41 Combination Wave and IEC 61000-4-5 5.3 IEEE C62.41 Electrically Fast Transients and IEC 61000-4-4 |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 2 MHz
CS101: 30 Hz ~ 150 kHz
CS114: 10 kHz ~ 30 MHz
CS115: Impulse 2 A
CS116: 10 kHz ~ 100 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 10 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 30 MHz ~ 10 GHz
Surge: Ring ±4 kV Combination ±4 kV
Burst: ±4 kV |
소재지-1 |
| KS C 9610-6-4:2017 |
전자파적합성(EMC) — 제6-4부: 일반기준 — 산업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) ― 제6-4부: 일반 표준 ― 산업 환경에서의 전자파 방출 표준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| ABS(American Bureau of Shipping) RULES FOR BUILDING AND CLASSING STEEL VESSELS:2024 |
PART 4 VESSEL SYSTEM AND MACHINERY CHAPTER 9 Automation SECTION 8 Equipment TABLE 1 Type Tests for Control, Monitoring and Safety Equipment 1. Power supply variations (a)electric 11. Electrostatic discharge 12. Electromagnetic field 13. Conducted low frequency 14. Conducted radio frequency 15. Burst/Fast transients 16. Surge voltage 17. Radiated emission 18. Conducted emission TABLE 2 Tests for Unit Certification of Control, Monitoring and Safety Equipment 3. External power supply failure |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| ABS(American Bureau of Shipping) RULES FOR BUILDING AND CLASSING STEEL VESSELS:2025 |
PART 4 VESSEL SYSTEM AND MACHINERY CHAPTER 9 Automation SECTION 9 Equipment TABLE 1 Type Tests for Control, Monitoring and Safety Equipment 1. Power supply variations (a)electric 11. Electrostatic discharge 12. Electromagnetic field 13. Conducted low frequency 14. Conducted radio frequency 15. Burst/Fast transients 16. Surge voltage 17. Radiated emission 18. Conducted emission TABLE 2 Tests for Unit Certification of Control, Monitoring and Safety Equipment 3. External power supply failure |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| BS IEC 60533:2015 |
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
CE: 10 kHz ~ 30 MHz
RE: 150 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 230 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s)
CLFI: 50 Hz ~ 10 kHz |
소재지-1 |
| Bureau Veritas Rule for the Classification of Steel Ships NR 467 AMENDMENTS:2024 |
SECTION 6 3 Power supply failure 4a Electric A.C. power supply variations 4b Electric D.C. power supply variations 13 Electrostatic discharge 14 Electromagnetic field 15 Conducted low Frequency 16 Conducted Radio Frequency 17 Electrical Transients / Burst 18 Surge 19 Radiated Emission 20 Conducted Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| Bureau Veritas Rule for the Classification of Steel Ships NR 467 AMENDMENTS:2026 |
SECTION 6 3 Power supply failure 4a Electric A.C. power supply variations 4b Electric D.C. power supply variations 13 Electrostatic discharge 14 Electromagnetic field 15 Conducted low Frequency 16 Conducted Radio Frequency 17 Electrical Transients / Burst 18 Surge 19 Radiated Emission 20 Conducted Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| ClassNK:2023 |
GUIDANCE FOR THE APPROVAL AND TYPE APPROVAL OF MATERIALS AND EQUIPMENT FOR MARINE USE Part7 Electrical power supply failure test, Electrical power supply fluctuation test, Power supply fluctuation test, Electrostatic discharge immunity test, Radiated radio frequency immunity test, Conducted low frequency immunity test, Conducted high frequency immunity test, Electrical burst/fast transient immunity test, Surge immunity test, Radiated emission test, Conducted emission test |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| ClassNK:2025 |
GUIDANCE FOR THE APPROVAL AND TYPE APPROVAL OF MATERIALS AND EQUIPMENT FOR MARINE USE Part7 Electrical power supply failure test, Electrical power supply fluctuation test, Power supply fluctuation test, Electrostatic discharge immunity test, Radiated radio frequency immunity test, Conducted low frequency immunity test, Conducted high frequency immunity test, Electrical burst/fast transient immunity test, Surge immunity test, Radiated emission test, Conducted emission test |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| DNV·GL Environmental test specification for electrical, electronic and programmable equipment and systems:2021 |
SECTION 3 ENVIRONMENTAL TYPE TEST SPECIFICATION 4. Electrical power supply failure test 5. Power supply variation tests 14. Electromagnetic compatibility (EMC) |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| GL(Germanischer Lloyd) Ⅵ Rules for Classification and Construction Additional Rules and Guidelines:2016 |
Part 7 Guidelines for the Performance of Type Approvals Chapter 2 Test Requirements for Electrical/Electronic Equipment and Systems Section 3 Test Requirements 3. Power supply failure 4. Power supply variations 15. Electrostatic discharge 16. Electromagnetic fields 17. Conducted fast transients(burst) 18. Conducted high frequency interference 19. Conducted slow transients(surge) 20. Conducted low frequency interference (harmonics) 21. Conducted emissions 22. Radiated emissions from enclosure port |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| IACS UR E10 Rev.9:2023 |
International association of classification societies E10 3. External power supply failure 4. Power supply variations a) electric 13. Electrostatic discharge 14. Electromagnetic field 15. Conducted low frequency 16. Conducted radio frequency 17. Burst/Fast transients 18. Surge/voltage 19. Radiated emission 20. Conducted emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| IACS UR E10 Rev.10:2024 |
International association of classification societies E10 3. External power supply failure 4. Power supply variations a) electric 13. Electrostatic discharge 14. Electromagnetic field 15. Conducted low frequency 16. Conducted radio frequency 17. Burst/Fast transients 18. Surge/voltage 19. Radiated emission 20. Conducted emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| IEC 60092-504:2016 |
Electrical installations in ships - part 504: Automation, control and instrumentation 4a. POWER SUPPLY VARIATIONS 4b. POWER SUPPLY FAILURE 13. ENCLOSURE DISCHARGE 14. ELECTRO-MAGNETIC FIELD 15. CONDUCTED LOW FREQUENCY16. CONDUCTED RADIO FREQUENCY 17. BURST/FAST TRANSIENTS 18. SURGE/SLOW TRANSIENTS 19. RADIATED EMISSIONS 30. CONDUCTED EMISSIONS |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| IEC 60533:2015 |
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
CE: 10 kHz ~ 30 MHz
RE: 150 kHz ~ 2 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 230 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s)
CLFI: 50 Hz ~ 10 kHz |
소재지-1 |
| KR:2024 |
한국선급: 제조법 및 형식승인 등에 관한 지침 3장, 표 3.23.1 3 전원상실시험 4 전원변동시험 14 정전기방전 내성시험 15 전자기장 내성시험 16 전도성 저주파 간섭에 대한 내성시험 17 전도성 무선주파수 간섭에 대한 내성시험 18 전기적 패스트 트랜젠트 / 버스트 내성시험 19 서지 내성시험 20 발산방사 측정시험 21 전도방사 측정시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| KR:2025 |
한국선급: 제조법 및 형식승인 등에 관한 지침 3장, 표 3.23.1 3 전원상실시험 4 전원변동시험 14 정전기방전 내성시험 15 전자기장 내성시험 16 전도성 저주파 간섭에 대한 내성시험 17 전도성 무선주파수 간섭에 대한 내성시험 18 전기적 패스트 트랜젠트 / 버스트 내성시험 19 서지 내성시험 20 발산방사 측정시험 21 전도방사 측정시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| KS C IEC 60533:2003 |
선박용 전기 설비-전기자기 적합성 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 2 GHz
CLFI: 50 Hz to 12 kHz
Voltage Variation: V 20 % Variation (1.5 s) F 10 % Variation (5 s) V 100 %
Dip (60 s)
Burst: ±2 kV
Surge: ±1 kV
CS: 150 kHz ~ 80 MHz
ESD: ±8 kV
RS: 80 MHz ~ 2 GHz |
소재지-1 |
| LLOYD'S REGISTER TYPE APPROVAL SYSTEM - Test Specification Number 1:2021 |
Electrical equipment control and monitoring equipment instrumentation and internal communication equipment computer and peripheral equipment 8. POWER SUPPLY VARIATION TEST 9. POWER SUPPLY FAILURE TEST 22. IMMUNITY TO CONDUCTED LOW FREQUENCY INTERFERENCE 23. IMMUNITY TO CONDUCTED HIGH FREQUENCY INTERFERENCE 24. IMMUNITY TO RADIATED RADIO FREQUENCY FIELDS 25. IMMUNITY TO FAST LOW ENERGY TRANSIENTS (BURSTS) 26. IMMUNITY TO SLOW HIGH ENERGY TRANSIENTS (SURGES) 27. IMMUNITY TO ELECTROSTATIC DISCHARGE (ESD) 29. RADIATED EMISSIONS 30. CONDUCTED EMISSIONS |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| LLOYD'S REGISTER TYPE APPROVAL SYSTEM - Test Specification Number 1:2024 |
Electrical equipment control and monitoring equipment instrumentation and internal communication equipment computer and peripheral equipment 8. POWER SUPPLY VARIATION TEST 9. POWER SUPPLY FAILURE TEST 22. IMMUNITY TO CONDUCTED LOW FREQUENCY INTERFERENCE 23. IMMUNITY TO CONDUCTED HIGH FREQUENCY INTERFERENCE 24. IMMUNITY TO RADIATED RADIO FREQUENCY FIELDS 25. IMMUNITY TO FAST LOW ENERGY TRANSIENTS (BURSTS) 26. IMMUNITY TO SLOW HIGH ENERGY TRANSIENTS (SURGES) 27. IMMUNITY TO ELECTROSTATIC DISCHARGE (ESD) 29. RADIATED EMISSIONS 30. CONDUCTED EMISSIONS |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation: V 20 % Variation(1.5 s) F 10 % Variation(5 s) V 100 %
Dip(60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| 해양수산부 고시 제2023-78호(2023.05.03.) |
선박용물건의 형식승인 시험 및 검정에 관한 기준 -전원상실시험 -전원변동시험 -정전기방전 내성시험 -방사전자계 내성시험 -전도성 저주파 간섭에 대한 내성시험 -전도성 고주파 간섭에 대한 내성시험 -버스트 내성시험 -서지 내성시험 -발산방사 측정시험 -전도방사 측정시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation:
V 20 % Variation (1.5 s)
F 10 % Variation (5 s)
V 100 % Dip (60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| 해양수산부 고시 제2024-000호(2024.12.30.) |
선박용물건의 형식승인 시험 및 검정에 관한 기준 -전원상실시험 -전원변동시험 -정전기방전 내성시험 -방사전자계 내성시험 -전도성 저주파 간섭에 대한 내성시험 -전도성 고주파 간섭에 대한 내성시험 -버스트 내성시험 -서지 내성시험 -발산방사 측정시험 -전도방사 측정시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
SURGE: ±1 kV
CS: 150 kHz ~ 80 MHz
Voltage Variation:
V 20 % Variation (1.5 s)
F 10 % Variation (5 s)
V 100 % Dip (60 s)
CLFI: 50 Hz ~ 12 kHz |
소재지-1 |
| EN 50130-4:2011+A1:2014 |
Alarm systems-Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EPRI TR-102323 Rev. 0:1994 |
Guidelines for Electromagnetic Interference Testing in Power Plants 7-2 Equipment Conducted Emissions, 30 Hz to 50 kHz 7-3 Equipment Conducted Emissions, 50 kHz to 400 MHz 7-4 Equipment Radiated Magnetic Field Emissions, 30 Hz to 100 kHz 7-5 Equipment Radiated Electric Field Emissions, 10 kHz to 1 GHz B-9 Continuous Wave, Radiated B-10 Continuous Wave, Conducted B-12 Surge tests B-13 Fast transient and impulse tests B-13 Electrostatic Discharge |
CE101: 30 Hz ~ 50 kHz
CE102: 50 kHz ~ 400 MHz
CS101: 30 Hz ~ 50 kHz
CS114: 50 kHz ~ 400 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 1 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 1 GHz
Surge: ±3 kV
Burst: ±3 kV
ESD: Air ±15 kV Contact ±8 kV |
소재지-1 |
| EPRI TR-102323 Rev. 1:1997 |
Guidelines for Electromagnetic Interference Testing in Power Plants 7-2 Equipment Conducted Emissions, 30 Hz to 50 kHz 7-3 Equipment Conducted Emissions, 50 kHz to 400 MHz 7-4 Equipment Radiated Magnetic Field Emissions, 30 Hz to 100 kHz 7-5 Equipment Radiated Electric Field Emissions, 10 kHz to 1 GHz B-10 Continuous Wave, Radiated B-11 Continuous Wave, Conducted B-12 Surge tests B-14 Fast transient and impulse tests B-14 Electrostatic Discharge |
CE101: 30 Hz ~ 50 kHz
CE102: 50 kHz ~ 400 MHz
CS101: 30 Hz ~ 50 kHz
CS114: 50 kHz ~ 400 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 1 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 1 GHz
Surge: ±3 kV
Burst: ±3 kV
ESD: Air ±15 kV Contact ±8 kV |
소재지-1 |
| EPRI TR-102323 Rev. 2:2000 |
Guidelines for Electromagnetic Interference Testing of Power Plant Equipment 5-8 Low-Frequency Conducted Susceptibility 5-10 High-Frequency Conducted Susceptibility 5-12 Low-Frequency Radiated Susceptibility 5-14 High-Frequency Radiated Susceptibility 5-15 Surge 5-16 Electrically-Fast Transient/Burst 5-17 Electrostatic Discharge 5-18 Low-Frequency Conducted Emissions 5-20 High-Frequency Conducted Emissions 5-22 Low-Frequency Radiated Emissions 5-24 High-Frequency Radiated Emissions |
CS101: 30 Hz ~ 50 kHz
CS114: 10 kHz ~ 200 MHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 10 GHz
Surge: ±4 kV
Burst: ±2 kV
ESD: Air ±15 kV Contact ±8 kV
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 10 GHz |
소재지-1 |
| EPRI TR-102323 Rev. 3:2004 |
Guidelines for Electromagnetic Interference Testing of Power Plant Equipment 5-6 Low-Frequency Conducted Susceptibility 5-8 High-Frequency Conducted Susceptibility 5-10 Low-Frequency Radiated Magnetic Field Susceptibility 5-12 High-Frequency Radiated Electric Field Susceptibility 5-13 Surge 5-15 Electrically-Fast Transient/Burst 5-17 Electrostatic Discharge 5-19 Low-Frequency Conducted Emissions 5-21 High-Frequency Conducted Emissions 5-23 Low-Frequency Radiated Magnetic Field Emissions 5-25 High-Frequency Radiated Electric Field Emissions |
CS101: 30 Hz ~ 150 kHz
CS114: 10 kHz ~ 200 MHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 10 GHz
Surge: 4 kV
CS116: 10 kHz ~ 100 MHz
Burst: ±2 kV
CS115: Impulse 5 A
ESD: Air ±15 kV Contact ±8 kV
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 2 MHz ~ 18 GHz |
소재지-1 |
| REGULATORY GUIDE 1.180:2000 |
GUIDELINES FOR EVALUATING ELECTROMAGNETIC AND RADIO-FREQUENCY INTERFERENCE IN SAFETY-RELATED INSTRUMENTATION AND CONTROL SYSTEMS 4.1 CE101-Conducted Emissions, Low Frequency 4.2 CE102-Conducted Emissions, High Frequency 4.3 CS101-Conducted Susceptibility, Low Frequency 4.4 CS114-Conducted Susceptibility, High Frequency 4.5 RE101-Radiated Emissions, Magnetic Field 4.6 RE102-Radiated Emissions, Electric Field 4.7 RS101-Radiated Susceptibility, Magnetic Fields 4.8 RS103-Radiated Susceptibility, Electric Fields 6.1 Ring Wave 6.2 Combination Wave 6.3 Electrically Fast Transients |
CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CS101: 30 Hz ~ 50 kHz
CS114: 10 kHz ~ 400 MHz
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 1 GHz
RS101: 30 Hz ~ 100 kHz
RS103: 10 kHz ~ 1 GHz
Surge: Ring ±3 kV Combination ±3 kV
Burst: ±3 kV |
소재지-1 |
| ISO 7637-2:2011 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only |
12 V and 24 V system |
소재지-1 |
| ISO 7637-3:2016 |
Road vehicles – Electrical disturbances form conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
12 V System
Fast 3a: (-30 ~ -110) V Fast 3b: (18 ~ 75) V
DCC Slow +: (8 ~ 30) V DCC Slow -: (-8 ~ -30) V
ICC Slow +: (3 ~ 6) V ICC Slow -: (-3 ~ -6) V
24 V System
Fast 3a: (-37 ~ -150) V Fast 3b: (37 ~ 150) V
DCC Slow +: (15 ~ 45) V DCC Slow -: (-15 ~ -45) V
ICC Slow +: (4 ~ 10) V ICC Slow -: (-4 ~ -10) V |
소재지-1 |
| IEC 61000-3-11:2017 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current ≤ 75 A and subject to conditional connection |
I ≤ 32 A |
소재지-1 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
10 kHz ~ 230 MHz, 20 V |
소재지-1 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
10 kHz ~ 6 GHz, 20 V/m |
소재지-1 |
| EN IEC 61000-4-18:2019/AC:2019-10 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
Slow Pulse(100 kHz, 1 MHz): 4 kV
Fast Pulse(3 MHz, 10 MHz, 30 MHz): 4 kV |
소재지-1 |
| EN IEC 61000-4-18:2019 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
Slow Pulse(100 kHz, 1 MHz): 4 kV
Fast Pulse(3 MHz, 10 MHz, 30 MHz): 4 kV |
소재지-1 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61000-4-11:2020/AC:2022-10 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61000-3-2:2019/A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
Rated current: ≤16 A |
소재지-1 |
| EN IEC 61000-3-2:2019/A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonics current emissions (equipment input current ≤16 A per phase) |
Rated current: ≤16 A |
소재지-1 |
| EN IEC 61000-3-11:2019 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
I ≤ 32 A |
소재지-1 |
| EN 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
Max. 1 000 A/m |
소재지-1 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
300 A/m |
소재지-1 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
10 kHz ~ 230 MHz, 20 V |
소재지-1 |
| EN 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
±(0.2 ~ 6.1) kV |
소재지-1 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
±(0.2 ~ 4.5) kV |
소재지-1 |
| EN 61000-4-34:2007+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61000-4-34:2007+A2:2025 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61000-4-3:2006+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
10 kHz ~ 6 GHz, 20 V/m |
소재지-1 |
| EN 61000-4-29:2000 |
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-3-12:2011 |
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
I ≤ 32 A |
소재지-1 |
| IEC 61000-3-12:2011/A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
I ≤ 32 A |
소재지-1 |
| IEC 61000-4-29:2000 |
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-4-28:1999+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
I ≤ 32 A |
소재지-1 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
±(0.2 ~ 30) kV |
소재지-1 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
±(0.2 ~ 30) kV |
소재지-1 |
| IEC 61000-4-19:2014 |
Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
LFCS: (2 to 150) kHz, 20 V |
소재지-1 |
| IEC 61000-4-18:2019 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
Slow Pulse(100 kHz, 1 MHz): 4 kV
Fast Pulse(3 MHz, 10 MHz, 30 MHz): 4 kV |
소재지-1 |
| IEC 61000-4-17:1999+A1:2001+A2:2008 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test |
DC: 380 V |
소재지-1 |
| IEC 61000-4-16:2015 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
Sweep and continuous: 30 V
Short duration test: 300 V |
소재지-1 |
| IEC 61000-4-14:1999+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
I ≤ 32 A |
소재지-1 |
| IEC 61000-4-13:2002+A2:2015 |
Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
I ≤ 32 A |
소재지-1 |
| IEC 61000-4-12:2017 |
Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
Max. 6 kV |
소재지-1 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-4-10:2016 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
Max. 100 A/m |
소재지-1 |
| IEC 61000-3-3:2013+A1:2017+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
Rated current: ≤16 A |
소재지-1 |
| IEC 61000-3-3:2013+A1:2017 |
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
Rated current: ≤16 A |
소재지-1 |
| IEC 61000-3-2:2018+A1:2020+A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
Rated current: ≤16 A |
소재지-1 |
| IEC 61000-3-2:2018/AMD1:2020 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
Rated current: ≤16 A |
소재지-1 |
| EN 61000-4-28:2000+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
I ≤ 32 A |
소재지-1 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
±(0.2 ~ 30) kV |
소재지-1 |
| EN IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
±(0.2 ~ 30) kV |
소재지-1 |
| IEC 60255-27:2013 |
Measuring relays and protection equipment - Part 27: Product safety requirements 10.6.4.2 Impulse voltage test |
Max. 8 kV |
소재지-1 |
| EN 60255-27:2014 |
Measuring relays and protection equipment - Part 27: Product safety requirements 10.6.4.2 Impulse voltage test |
Max. 8 kV |
소재지-1 |
| EN IEC 60255-27:2025 |
Measuring relays and protection equipment - Part 27: Product safety requirements 10.6.4.2 Impulse voltage test |
Max. 8 kV |
소재지-1 |
| IEC 61180:2016 |
High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment 7 Tests with impulse voltage |
Max. 8 kV |
소재지-1 |
| SES E 922 VERSION:8:2018 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 0.15 MHz ~ 30 MHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 400 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a,5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV MFI: 15 Hz ~ 150 kHz CE(AC Power): 150 kHz ~ 30 MHz CE(Telecommunication Port): 150 kHz ~ 30 MHz Harmonic Current Emission: Rated current: ≤16 A Voltage Fluctuation and Flicker: Rated current: ≤16 A Burst: ±2 kV Surge: ±2 kV |
소재지-1 |
| SES E 922 VERSION:7:2017 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY |
RE: 0.1 MHz ~ 2.5 GHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 400 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV MFI: 15 Hz ~ 150 kHz CE(AC Power): 150 kHz ~ 30 MHz CE(Telecommunication Port): 150 kHz ~ 30 MHz Harmonic Current Emission: Rated current: ≤16 A Voltage Fluctuation and Flicker: Rated current: ≤16 A Burst: ±2 kV Surge: ±2 kV |
소재지-1 |
| SES E 922 VERSION:6:2016 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY [Exception] 6.3.5 3) Stripline Test 4) TEM Cell Test |
RE : 0.1 MHz ~ 2.5 GHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 400 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b
CTE: 12 V System ESD: ±(4 ~ 25) kV
MFI: 15 Hz ~ 150 kHz |
소재지-1 |
| SES E 922 VERSION:5:2013 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY [Exception] 6.3.5 3) Stripline Test 4) TEM Cell Test |
RE: 0.1 MHz ~ 2.5 GHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 400 MHz ~ 2 GHz
BCI: 1MHz ~ 400MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b
CTE: 12 V System ESD: ±(4 ~ 25) kV
MFI: 60 Hz ~ 30 kHz |
소재지-1 |
| SES E 922 VERSION:4:2008 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY [Exception] 5.6 Strip line Method 5.7 TEM Cell Method 5.8 Wideband TEM Cell Method |
RE: 0.10 MHz ~ 1 GHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b CTE: 12 V System
ESD: ±(4 ~ 15) kV |
소재지-1 |
| SAE J1113-4:2014 |
lmmunity to Radiated EIectromagnetic Fields - Bulk Current Injection (BCI) Method |
0.1 MHz ~ 400 MHz |
소재지-1 |
| SAE J1113-21:1994 /A1:1998 |
Electronmagnetic Compatibility Measurement Procedure for Vehicle Components—Part 21: Immunity to Electromagnetic Fields, 10 kHz to 18 GHz, Absorber-Lined Chamber |
10 kHz ~ 18 GHz |
소재지-1 |
| SAE J1113-13:2004 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 13: Immunity to Electrostatic Discharge |
±(0.2 ~ 30) kV |
소재지-1 |
| RENAULT 36-00-808/--N:2016 |
RESISTANCE TO ELECTRICAL DISTURBANCES AND ELECTROMAGNETIC COMPATIBILITY INSTRUCTIONS CONCERNING ELECTRICAL, ELECTRONIC AND PYROTECHNIC EQUIPMENT
[Exception]
EQ/IC 09 Immunity to ignition high voltage
EQ/IC 10 Resistance of inductive load connected circuits
EQ/IC 11 Resistance to impulsive transient
EQ/IR 01 Immunity to radiated field(400 V/m)unity to ignition high voltage |
RE: 0.1 MHz ~ 6 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 20 Hz ~ 5.9 MHz
RI: 200 MHz ~ 3.2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V, 24 V System
ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 200 kHz |
소재지-1 |
| RENAULT 36-00-808/--M:2012 |
RESISTANCE TO ELECTRICAL DISTURBANCES AND ELECTROMAGNETIC COMPATIBILITY INSTRUCTIONS CONCERNING ELECTRICAL, ELECTRONIC AND PYROTECHNIC EQUIPMENT
[Exception]
EQ/IC 11 Resistance to impulsive transient
EQ/IC 09 Immunity to ignition high voltage
EQ/IC 10 Resistance of inductive load connected circuits |
RE: 0.1 MHz ~ 2 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 20 Hz ~ 5.9 MHz
RI: 200 MHz ~ 3.2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V, 24 V System
ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 200 kHz |
소재지-1 |
| RENAULT 36-00-808/--L:2010 |
RESISTANCE TO ELECTRICAL DISTURBANCES AND ELECTROMAGNETIC COMPATIBILITY INSTRUCTIONS CONCERNING ELECTRICAL, ELECTRONIC AND PYROTECHNIC EQUIPMENT
[Exception]
EQ/IC 11 Resistance to impulsive transient
EQ/IC 09 Immunity to ignition high voltage
EQ/IC 10 Resistance of inductive load connected circuits |
RE: 0.1 MHz ~ 2 GHz
MFE: 20 Hz ~ 100 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 20 Hz ~ 5.9 MHz
RI: 200 MHz ~ 2 GHz
BCI: 1 MHz ~ 400 MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V, 24 V System
ESD: ±(4 ~ 25) kV
MFI: 20 Hz ~ 100 kHz |
소재지-1 |
| KS C CISPR 25:2011 |
차량과 보트 및 내연기관 - 무선 방해 특성 - 장착된 수신기 보호를 위한 측정 한계값과 측정 방법 [Exception] 제5부 : 동일한 차량의 안테나에 의해 수신된 방출측정 제6부 : 컴포넌트/모듈로부터의 복사성 방출 -TEM셀(cell)법, 스트립라인(stripline)법 |
CE(Power Line): 150 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RE: 100 kHz ~ 18 GHz |
소재지-1 |
| KS C CISPR 12:2011 |
차량과 보트 및 내연기관 - 무선 방해 특성 - 외부 수신기를 보호하기 위한 방해 측정 한계값과 측정 방법 [Exception] 5.3.2 차량, 모터보트 5.3.3 장치 |
CE: 100 kHz ~ 30 MHz
RE: 100 kHz ~ 18 GHz |
소재지-1 |
| IEC 60255-27:2023 |
Measuring relays and protection equipment - Part 27: Product safety requirements 9.6.4.2 Impulse voltage test |
Max. 8 kV |
소재지-1 |
| KS C IEC 60255-27:2013 |
전기 계전기 - 제27부: 제품 안전 요구사항 10.6.4.2 충격전압 시험 |
Max. 8 kV |
소재지-1 |
| ANSI C63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz [Exception] RE: 18 GHz ~ 40 GHz |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 61000-4-19:2014 |
Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
LFCS: (2 to 150) kHz, 20 V |
소재지-1 |
| EN 61000-4-17:1999+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test |
DC: 380 V |
소재지-1 |
| EN 61000-4-16:2016 |
Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
Sweep and continuous: 30 V
Short duration test: 300 V |
소재지-1 |
| EN 61000-4-14:1999+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
I ≤ 32 A |
소재지-1 |
| EN 61000-4-13:2002+A2:2016 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
I ≤ 32 A |
소재지-1 |
| EN 61000-4-12:2017 |
Electromagnetic Compatibility (EMC) Part 4-12: Testing and measurement techniques - Ring wave immunity test |
Max. 6 kV |
소재지-1 |
| EN 61000-4-10:2017 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
Max. 100 A/m |
소재지-1 |
| EN 61000-3-3:2013/A2:2021/AC:2022-01 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
Rated current: ≤16 A |
소재지-1 |
| EN 61000-3-3:2013/A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
Rated current: ≤16 A |
소재지-1 |
| EN 61000-3-12:2011 |
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase |
I ≤ 32 A |
소재지-1 |
| CISPR 16-2-3:2016/AMD1:2019/AMD2:2023 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 16-2-3:2016/AMD1:2019 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| CISPR 16-2-1:2017 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements |
CE: 9 kHz ~ 30 MHz |
소재지-1 |
| ANSI C63.4-2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz [Exception] RE: 18 GHz ~ 40 GHz |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| IEC 61000-4-3:2006+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
10 kHz ~ 6 GHz, 20 V/m |
소재지-1 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency electromagnetic field immunity test |
10 kHz ~ 6 GHz, 20 V/m |
소재지-1 |
| EN 61547:2009 |
Equipment for general lighting purpose – EMC immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: Max 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| CISPR 15:2018+A1:2024 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~6 000 MHz |
소재지-1 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~1 000 MHz |
소재지-1 |
| KS C CISPR 24:2014 |
전기자기적합성(EMC) — 정보 기기(ITE)의 전기자기 내성 시험방법 및 측정의 한계값 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C CISPR 22:2011 |
정보기술기기 - 무선 방해 특성 - 측정 한계값과 측정방법 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz |
소재지-1 |
| KN 24:2011 |
정보기기 내성 시험 방법 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KN 22:2009 |
정보기기류 장해방지 시험방법 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz |
소재지-1 |
| EN 55024:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 55022:2010+AC:2011 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz |
소재지-1 |
| CISPR 24:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| CISPR 22:2008 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz |
소재지-1 |
| AS/NZS CISPR 24:2013+A1:2017 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| AS/NZS CISPR 22:2009+A1:2010 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz |
소재지-1 |
| KRS SG 0015-14(R) |
전자연동장치 Electronic Interlocking Device 4.7.3 전자파 적합성 시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 1 GHz
ESD: ±8 kV
RS: 80 MHz ~ 2.5 GHz
Burst: ±4 kV
Surge: ±4 kV
CS: 150 kHz ~ 80 MHz |
소재지-1 |
| IEC 61204-3:2016 |
Low-voltage switch mode power supplies – Part 3: Electromagnetic Compatibility(EMC) |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61204-3:2018 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61204-3:2001 |
Low voltage power supplies, d.c. output — Part 3: Electromagnetic Compatibility (EMC) |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KN 60:2008 |
전력선통신기기류 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 50412-2-1:2005 |
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1.6 MHz to 30 MHz — part 2-1: Residential, commercial and industrial environment — Immunity requirements |
ESD: ±8 kV
RS: 80 MHz ~ 1 GHz
Burst: ±1 kV
Surge: ±2 kV
CS: 150 kHz ~ 80 MHz
Magnetic: 3 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| S2-W-5-2009:2009 |
의무 안전인증대상 기계·기구 등이 아닌 기계·기구 등의 안전인증 규정 [별표5] 기계·기구 등에 관한 공통 기술기준 [전자파 분야] |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 80 MHz
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 55015:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 300 MHz |
소재지-1 |
| EN IEC 55015:2019/A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz |
소재지-1 |
| KN 61000-6-3:2012 |
주거, 상업 및 경공업 환경에서의 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| KN 61000-6-1:2017 |
주거, 상업 및 경공업 환경에서의 일반 내성 시험방법 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC)- Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| IEC 61000-6-3:2006+A1:2010 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light – industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| AS/NZS 61000-6-3:2021 |
Electromagnetic compatibility (EMC), Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| AS/NZS 61000-6-3:2012 |
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for residential, commercial and light – industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-1 |
| AS/NZS 61000-6-1:2006 |
Electromagnetic compatibility (EMC) Part 6.1: Generic standards—Immunity for residential, commercial and light-industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| AS/NZS 61000.6.1:2025 |
Electromagnetic compatibility (EMC) Part 6.1: Generic standards—Immunity for residential, commercial and light-industrial environments |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9815:2023 |
조명기기 및 유사기기의 무선 방해 특성의 허용기준 및 측정 방법 |
CE: 9 kHz ~ 30 MHz
RE: 30 MHz ~1 000 MH |
소재지-1 |
| KS C 9547:2023 |
일반 조명기기 — 전자파적합성(EMC) 내성 요구사항 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9547:2020 |
일반 조명기기 — 전자파적합성(EMC) 내성 요구사항 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: Max 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61547:2009 |
Equipment for general lighting purpose – EMC immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: Max 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| EN IEC 61547:2023 |
Equipment for general lighting purpose – EMC immunity requirements |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: Max 30 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 61000-4-34:2009 |
전자파적합성(EMC) — 제4-34부: 시험 및 측정 기술 — 상당 입력전류 16 A를 초과하는 기기에 대한 전압 강하, 순간 정전 및 전압 변동 내성 시험 |
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 61000-4-29:2014 |
전기자기적합성(EMC) ― 제4-29부: 시험 및 측정 기술 – 직류 전원단자에서의 전압강하, 순시 정전 및 전압변동 내성시험 |
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9610-3-12:2023 |
전자파적합성(EMC) — 제3-12부: 허용기준 — 공공 저압 배전망에 연결된 기기에서 발생하는 고조파 전류의 허용기준(16 A < 상당 입력전류 ≤ 75 A) |
I ≤ 32 A |
소재지-1 |
| KS C 9610-3-12:2020 |
전자파적합성(EMC) — 제3-12부: 허용기준 — 공공 저압 배전망에 연결된 기기에서 발생하는 고조파 전류의 허용기준(16 A < 상당 입력전류 ≤ 75 A) |
I ≤ 32 A |
소재지-1 |
| KS C 9610-3-11:2023 |
전자파적합성(EMC) — 제3-11부: 허용기준 — 공공 저압 배전망에서의 전압변동 및 플리커에 대한 허용기준(상당 정격전류 75 A 이하와 조건부 연결 기기) |
I ≤ 32 A |
소재지-1 |
| KS C 9610-3-11:2017 |
전자파적합성(EMC) — 제3-11부: 허용기준 — 공공 저압 배전망에서의 전압변동 및 플리커에 대한 허용기준(상당 정격전류 75 A 이하와 조건부 연결 기기) |
I ≤ 32 A |
소재지-1 |
| KS C 0262:2014 |
전기자기적합성(EMC) ― 측정 일반 |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz |
소재지-1 |
| IEEE Std C37.90.1:2012 |
IEEE Standard for Surge Withstand Capability (SWC) Tests for Protective Relays and Relay Systems Associated with Electric Power Apparatus |
Max. 8 kV |
소재지-1 |
| IEC 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
Max. 1 000 A/m |
소재지-1 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
300 A/m |
소재지-1 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
10 kHz ~ 230 MHz, 20 V |
소재지-1 |
| IEC 61000-4-6:2013 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
10 kHz ~ 230 MHz, 20 V |
소재지-1 |
| IEC 61000-4-5:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
±(0.2 ~ 6.1) kV |
소재지-1 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
±(0.2 ~ 4.5) kV |
소재지-1 |
| IEC 61000-4-34:2005+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| IEC 61000-4-34:2005+A1:2009+A2:2025 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9610-4-11:2017 |
전자파적합성(EMC) — 제4-11부: 시험 및 측정기술 — 전압 강하, 순간 정전, 전압 변동 내성 시험 |
Dip: (0 ~ 100) % |
소재지-1 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) — 제4-11부: 시험 및 측정기술 — 전압 강하, 순간 정전, 전압 변동 내성 시험 |
Dip: (0 ~ 100) % |
소재지-1 |
| KS C IEC 61000-4-28:2010 |
전기자기 적합성 (EMC) - 제4-28부 : 시험 및 측정 기술 - 상당 입력전류가 16 A 이하인 기기의 전원 주파수 변화 내성 시험 |
I ≤ 32 A |
소재지-1 |
| KS C IEC 61000-4-19:2014 |
전자파적합성(EMC) — 제4–19부: 시험 및 측정 기술 — 교류 전원 포트의 주파수 범위 2 kHz∼150 kHz에서 신호발생 및 전도성 차동 모드 방해에 대한 내성 시험 |
LFCS: (2 to 150) kHz, 20 V |
소재지-1 |
| KS C IEC 61000-4-18:2014 |
전기자기적합성(EMC) ― 제4-18부: 시험 및 측정 기술 ― 감쇠 진동파 내성시험 |
Slow Pulse(100 kHz, 1 MHz): 4 kV
Fast Pulse(3 MHz, 10 MHz, 30 MHz): 4 kV |
소재지-1 |
| KS C IEC 61000-4-17:2010 |
전기자기적합성(EMC) - 제4-17부 : 시험 및 측정기술 - 직류 입력 전원 포트에서의 맥동 내성 시험 |
DC: 380 V |
소재지-1 |
| KS C IEC 61000-4-16:2013 |
전기자기적합성(EMC) — 제4–16부: 시험 및 측정방법 — 주파수 범위 0 Hz ∼ 150 kHz에서 전도 및 공통모드 방해 내성시험 |
Sweep and continuous: 30 V
Short duration test: 300 V |
소재지-1 |
| KS C IEC 61000-4-14:2010 |
전기자기적합성(EMC) - 제4-14부 : 시험 및 측정기술 - 상당 입력전류가 16 A 이하인 기기의 전압 변동 내성 시험 |
I ≤ 32 A |
소재지-1 |
| KS C IEC 61000-4-13:2010 |
전기자기적합성(EMC) - 제4-13부 : 시험 및 측정기술 - 교류전원 포트에서 주전원 신호를 포함하는 고조파와 내부고조파, 저주파 내성 시험 |
I ≤ 32 A |
소재지-1 |
| KS C IEC 61000-4-13:2015 |
전기자기적합성(EMC) - 제4-13부 : 시험 및 측정기술 - 교류전원 포트에서 주전원 신호를 포함하는 고조파와 내부고조파, 저주파 내성 시험 |
I ≤ 32 A |
소재지-1 |
| KS C IEC 61000-4-12:2003 |
전기자기적합성(EMC) - 제4-12부: 시험 및 측정기술 - 링 파형 내성시험 |
Max. 6 kV |
소재지-1 |
| KS C IEC 61000-4-10:2014 |
전기자기적합성(EMC) — 제4-10부: 시험 및 측정기술 — 감쇄진동 자기장 내성시험 — EMC 기본 규격 |
Max. 100 A/m |
소재지-1 |
| KS C 9610-4-9:2019 |
전자파적합성(EMC) - 제4-9부: 시험 및 측정기술 - 펄스 자기장 내성 시험 |
Max. 1 000 A/m |
소재지-1 |
| KS C 9610-4-9:2017 |
전자파적합성(EMC) - 제4-9부: 시험 및 측정기술 - 펄스 자기장 내성 시험 |
Max. 1 000 A/m |
소재지-1 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) — 제4-8부: 시험 및 측정기술 — 전원 주파수 자기장 내성 시험 |
300 A/m |
소재지-1 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) — 제4-6부: 시험 및 측정기술 — 전도성 RF 전자기장 내성 시험 |
10 kHz ~ 230 MHz, 20 V |
소재지-1 |
| KS C 9610-4-6:2017 |
전자파적합성(EMC) — 제4-6부: 시험 및 측정기술 — 전도성 RF 전자기장 내성 시험 |
10 kHz ~ 230 MHz, 20 V |
소재지-1 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) — 제4-5부: 시험 및 측정 기술 — 서지 내성 시험 |
±(0.2 ~ 6.1) kV |
소재지-1 |
| KS C 9610-4-5:2020 |
전자파적합성(EMC) — 제4-5부: 시험 및 측정 기술 — 서지 내성 시험 |
±(0.2 ~ 6.1) kV |
소재지-1 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) — 제4-4부: 시험 및 측정 기술 — 전기적 빠른 과도현상, 버스트 내성 시험 |
±(0.2 ~ 4.5) kV |
소재지-1 |
| KS C 9610-4-4:2017 |
전자파적합성(EMC) — 제4-4부: 시험 및 측정기술 — 전기적 빠른 과도현상, 버스트 내성 시험 |
±(0.2 ~ 4.5) kV |
소재지-1 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) — 제4-3부: 시험 및 측정기술 — 방사성 RF 전자기장 내성 시험 |
10 kHz ~ 6 GHz, 20 V/m |
소재지-1 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) — 제4-2부: 시험 및 측정기술 — 정전기 방전 내성 시험 |
±(0.2 ~ 30) kV |
소재지-1 |
| KS C 9610-6-1:2017 |
전자파적합성(EMC) — 제6-1부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 10 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-1 |
| QCVN 112:2017/BTTTT |
National technical regulation on general electromagnetic compatibility for radio broadband data transmission equipment |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지-1 |
| QCVN 96:2015/BTTTT |
National technical regulationon electromagnetic compatibilityfor Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지-1 |
| QCVN 18:2022/BTTTT |
National technical regulation on General Electromagnetic Compatibility for Radio Communications Equipment |
ESD: Max. ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: Max. ±4 kV
Surge: Max. ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max. 30
A/m
Voltage Dip: (0 ~ 100)
% |
소재지-1 |
| QCVN 118:2018/BTTTT |
National technical regulation on Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지-1 |
| EN 60601-2-44:2009+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| SES E 922 VERSION:4:2008 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY
[Exception]
5.6 Strip line Method
5.7 TEM Cell Method
5.8 Wideband TEM Cell Method |
RE : 0.10 MHz - 1 GHz
CE(Power Line) :
100 kHz - 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 80 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 15) kV
MFI : 60 Hz ~ 30 kHz |
소재지-2 |
| SAE J1113-13:2004 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components
- Part 13 : Immunity to Electrostatic Discharge |
±(2 ~ 30) kV |
소재지-2 |
| RENAULT 36-00-808/--N:2016 |
RESISTANCE TO ELECTRICAL DISTURBANCES AND ELECTROMAGNETIC COMPATIBILITY INSTRUCTIONS CONCERNING ELECTRICAL, ELECTRONIC AND PYROTECHNIC EQUIPMENT [Exception]
EQ/IC 09 Immunity to ignition high voltage
EQ/IC 10 Resistance of inductive load connected circuits
EQ/IR 01 Immunity to radiated field(400V/m) unity to ignition high voltage |
RE : 0.1 MHz ~ 6 GHz
MFE : 20 Hz ~ 200 kHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
20 Hz ~ 5.9 MHz
ALSE : 200 MHz ~ 3.2 GHz
BCI : 100 kHz ~ 400 MHz
CTI : (-150 ~ 100 ) V
CTE : (-200 ~ 200) V
ESD : ±(4 ~ 25) kV
MFI : DC, 15 Hz ~ 200 kHz
Handy : 28 MHz ~ 2700 MHz
Impulsive : ±(80 ~ 400) V |
소재지-2 |
| RENAULT 36-00-808/--M:2012 |
RESISTANCE TO ELECTRICAL DISTURBANCES
AND ELECTROMAGNETIC COMPATIBILITY
INSTRUCTIONS CONCERNING
ELECTRICAL, ELECTRONIC AND PYROTECHNIC
EQUIPMENT
[Exception]
EQ/IC 11 Resistance to impulsive transient
EQ/IC 09 Immunity to ignition high voltage
EQ/IC 10 Resistance of inductive load connected circuits
EQ/IR 05 Resistance to
handy transmitters |
RE : 0.1 MHz ~ 2 GHz
MFE : 20 Hz ~ 200 kHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
20 Hz ~ 5.9 MHz
ALSE : 200 MHz ~
3.2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100 ) V
CTE : (-200 ~ 200) V
(-30 ~ 30) A
ESD : ±(4 ~ 25) kV
MFI : DC, 15 Hz ~ 200 kHz |
소재지-2 |
| RENAULT 36-00-808/--L:2010 |
RESISTANCE TO ELECTRICAL DISTURBANCES AND ELECTROMAGNETIC COMPATIBILITY INSTRUCTIONS CONCERNING ELECTRICAL, ELECTRONIC AND PYROTECHNIC EQUIPMENT
[Exception]
EQ/IC 11 Resistance to impulsive transient
EQ/IC 09 Immunity to ignition high voltage
EQ/IC 10 Resistance of inductive load connected circuits
EQ/IR 05 Resistance to
handy transmitters |
RE : 0.1 MHz ~ 2 GHz
MFE : 20 Hz ~ 200 kHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
20 Hz ~ 5.9 MHz
ALSE : 200 MHz ~
2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100 ) V
CTE : (-200 ~ 200) V
(-30 ~ 30) A
ESD : ±(4 ~ 25) kV
MFI : 20 Hz ~ 100 kHz |
소재지-2 |
| KS C CISPR 25:2011 |
차량용 수신기 보호를 위한 전기 자기 장해 특성 측정 방법 및 측정의 한계값 [Exception] 제5부 : 동일한 차량의 안테나에 의해 수신된 방출측정 제6부 : 컴포넌트/모듈로부터의 복사성 방출 -TEM셀(cell)법, 스트립라인(stripline)법 |
CE(Power Line) :
150 kHz ~ 108 MHz
CE(Signal Line) :
150 kHz ~ 108 MHz
RE:150 kHz ~2.5 GHz |
소재지-2 |
| KS C 9990:2017 |
자동차 및 내연기관 구동기기류 전자파적합성(EMC) 시험 방법
[제외항목]
TEM cell
스트립선로 |
RE : 30 MHz ~ 1 GHz
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V
RI : 20 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz |
소재지-2 |
| KN 41:2016 |
자동차 및 내연기관 구동기기류등의 전자파적합성 시험방법
[제외항목]
TEM cell
스트립선로 |
RE : 30 MHz ~ 1 GHz
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V
RI : 20 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz |
소재지-2 |
| ISO 7637-3:2016 |
Road vehicles – Electrical disturbance form conduction and coupling
- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines. |
-150 V ~ 150 V |
소재지-2 |
| ISO 7637-2:2011 |
Road vehicles - Electrical disturbances from conduction and coupling
- Part 2: Electrical transient conduction along supply lines only |
-600 V ~ 300 V |
소재지-2 |
| ISO 16750-2:2012 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment
- Part 2: Electrical loads |
12 V and 24 V system |
소재지-2 |
| ISO 16750-2:2023 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment
- Part 2: Electrical loads |
12 V and 24 V system |
소재지-2 |
| ISO 11452-9:2021 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
Part 9:Portable transmitters |
26 MHz ~ 5 850 MHz
Max : 20 W |
소재지-2 |
| ISO 11452-8:2015 |
Road vehicles - Component test methods for electrical disturbances from narrow band radiated electromagnetic energy
- Part 8: Immunity to magnetic fields |
DC : 3 000 A/m,
AC : 15 Hz ~ 150 kHz
1 000 A/m |
소재지-2 |
| Addendum 9 – UN Regulation No. 10 Revision 6:2019 |
Electromagnetic compatibility
[Exception]
Annex 4 - Method of measurement of radiated broadband electromagnetic emissions from vehicles
Annex 5 - Method ofmeasurement of radiated narrowband electromagnetic emissions from vehicles
Annex 6 - Method of testing for immunity of vehicles toelectromagnetic radiation
Annex 7 - Method of measurement of radiated broadband electromagnetic emissions from electrical/electronic sub-assemblies(ESAs)
Annex 9 - Appendix 800 mm Stripline testing Annex 9 - Appendix 2Typical TEM cell dimensions
Annex 11 Method(s) of testing for emission of harmonics generated on AC Power Lines from vehicle
Annex 12 Method(s) of testing for emission of voltage changes, voltage fluctuations and flicker on AC Power lines from vehicle
Annex 13 Method(s) of testing for emission of radio frequency conducted disturbances on AC or DC power lines from vehicles
Annex 14 Method(s) of testing for emission of radio frequency conducted disturbances on network and telecommunication accessfrom vehicles
Annex 15 Method of testing for immunity of vehicles to electrical fast transient/burst disturbances conducted along AC and DC Power line
Annex 16 Method of testing for immunity of vehicles to surges conducted along AC and DC power line
Annex 17 Method(s) of testing for emission of harmonics generated on AC power lines from an ESA
Annex 18 Method(s) of testing for emission of voltage changes, voltage fluctuations and flicker on AC power lines from an ESA |
RE : 30 MHz ~ 4 GHz
RI : 80 MHz ~ 3.2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V
CE(AC, DC Power) :
(0.15 ~ 30) MHz
CE(TEL) : (0.15 ~ 30) MHz
Harmonic Current
Emission : 16A
Voltage Fluctuation
and Flicker : 16A
Electrical Fast
Transients/Burst :
±4 kV
Surge Transient :
±6 kV |
소재지-2 |
| Addendum 9:Regulation No. 10 Revision 5:2014 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
[Exception]
Annex 4 - Method of measurement of radiated broadband electromagnetic emissions from vehicles
Annex 5 - Method of measurement of radiated narrowband electromagnetic emissions from vehicles
Annex 6 - Method of testing for immunity of vehicles to electromagnetic radiation
Annex 9 - Appendix 1 800 mm Stripline testing Annex 9 - Appendix 2 TEM cell Testing
Annex 11 Method(s) of testing for emission of harmonics generated on AC Power Lines from vehicle
Annex 12 Method(s) of testing for emission of voltage changes, voltage fluctuations and flicker on AC Power lines from vehicle
Annex 13 Method(s) of testing for emission of radio frequency conducted disturbances on AC or DC power lines from vehicles
Annex 14 Method(s) of testing for emission of radio frequency conducted disturbances on network and telecommunication access from vehicles
Annex 15 Method of testing for immunity of vehicles to electrical fast transient/burst disturbances conducted along AC and DC Power line
Annex 16 Method of testing for immunity of vehicles to surges conducted along AC and DC power line |
RE : 30 MHz ~ 4 GHz
RI : 80 MHz ~ 3.2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V
CE(AC, DC Power) :
(0.15 ~ 30) MHz
CE(TEL) : (0.15 ~ 30) MHz
Harmonic Current
Emission : 16A
Voltage Fluctuation
and Flicker : 16A
Electrical Fast
Transients/Burst :
±4 kV
Surge Transient :
±6 kV |
소재지-2 |
| CISPR 25:2016 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
[Exception]
6.6 Radiated emission from
components/modules-TEM cell method
6.7 Radiated emission from
components/modules-Stripline method |
CE(Power Line) :
150 kHz ~ 108 MHz
CE(Signal Line) :
150 kHz ~ 245 MHz
RE:150 kHz ~2.5 GHz |
소재지-2 |
| ISO 11452-4:2020 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- Part 4: Harness excitation methods
[Exception]
6.2 TWC test method |
0.1 MHz ~ 400 MHz,
200 mA |
소재지-2 |
| ISO 11452-4:2011 |
Road vehicles - Component test methods for electrical disturbances from narrow band radiated electromagnetic energy
- Part 4: Harness excitation methods
[Exception]
6.2 TWC test method |
1 MHz ~ 400 MHz,
200 mA |
소재지-2 |
| ISO 11452-2:2019 |
Road vehicles - Component test methods for electrical disturbances from narrow band radiated electromagnetic energy
- Part 2: Absorber-lined shielded enclosure |
20 MHz ~ 6 GHz |
소재지-2 |
| ISO 11452-10:2009 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- Part 10: Immunity to conducted disturbances in the extended audio frequency range |
15 Hz ~ 250 kHz |
소재지-2 |
| ISO 10605:2023 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
±(2 ~ 30) kV |
소재지-2 |
| ES 96202-01:2014 |
Electromagnetic compatibility (24 V)
[Exception]
5.6 Strip line Method testing
5.7 TEM Cell Method testing
5.8 Wideband TEM Cell Method |
RE : 0.1 MHz ~ 2.5 GHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V
ESD : ±(4 ~ 25) kV |
소재지-2 |
| ES 96200-00/O:2016 |
Electromagnetic compatibility specification |
RE : 0.1 MHz ~ 2.5 GHz
MFE : 20 Hz ~ 200 kHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 80 MHz ~
3 GHz
BCI : 1 MHz ~ 400 MHz
GSM : (900/1 800/
1 900) MHz
Transceiver :
(144/222/445) MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV
MFI : DC, 15 Hz ~ 150 kHz
CE(AC Power)
: 0.15 MHz ~ 30 MHz
CE(Telecommunication Port) : 0.15 MHz ~ 30 MHz
Harmonic Current
Emission
: Rated current: ≤16 A
Voltage Fluctuation and Flicker
: Rated current: ≤16 A
EFT/Burst : Max ±4 kV
Surge : Max ±6 kV |
소재지-2 |
| ES 96200-00/L:2014 |
Electromagnetic compatibility specification
[Exception]
4.3.3.2 TEM cell testing
4.3.3.4 Stripline testing |
RE : 0.1 MHz ~ 2.5 GHz
MFE : 20 Hz ~ 200 kHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
20 Hz ~ 108 MHz
ALSE : 80 MHz ~
3 GHz
BCI : 1 MHz ~ 400 MHz
GSM : (900/1 800/
1 900) MHz
Transceiver :
(144/222/445) MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV
MFI : DC,
15 Hz ~ 150 kHz |
소재지-2 |
| ES 96200-00/K:2011 |
Electromagnetic compatibility specification
[Exception]
4.3.3.2 TEM cell testing
4.3.3.4 Stripline testing |
RE : 0.1 MHz ~ 2.5 GHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 80 MHz ~
2 GHz
BCI : 20 MHz ~
400 MHz
GSM : (900/1 800/
1 900) MHz
Transceiver :
(144/222/445) MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV |
소재지-2 |
| ES 96200-00/G:2008 |
Electromagnetic compatibility specification
[Exception]
4.3.3.2 TEM cell testing
4.3.3.4 Stripline testing |
RE : 0.15 MHz ~ 2.5 GHz
CE(Power Line) :
150 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 80 MHz ~ 2 GHz
BCI : 20 MHz ~ 400 MHz
GSM : (900/1 800/
1 900) MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV |
소재지-2 |
| ES 96200-00/17th:2017 |
Electromagnetic compatibility specification |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 20 MHz ~ 3 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (146/222/444) MHz
Portable transmitters: 146 MHz ~ 5.925 GHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz
CE(AC Power): 0.15 MHz ~ 30 MHz
CE(Telecommunication Port): 0.15 MHz ~ 30 MHz
Harmonic Current Emission: Rated current: ≤16 A
Voltage Fluctuation and Flicker: Rated current: ≤16 A
Burst: ±4 kV
Surge: ±6 kV |
소재지-2 |
| ES 96200-00/16th:2016 |
Electromagnetic compatibility specification |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line): 100 kHz ~ 108 MHz
CE(Signal Line): 100 kHz ~ 108 MHz
RI: 80 MHz ~ 3 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (146/222/444) MHz
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4, 5b
CTE: 12 V System ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz
CE(AC Power): 0.15 MHz ~ 30 MHz
CE(Telecommunication Port): 0.15 MHz ~ 30 MHz
Harmonic Current Emission: Rated current: ≤16 A
Voltage Fluctuation and Flicker: Rated current: ≤16 A
Burst: ±4 kV
Surge: ±6 kV |
소재지-2 |
| EN 50498:2010 |
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles |
RE : 30 MHz ~ 1 GHz
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V |
소재지-2 |
| SES E 922 VERSION:5:2013 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY
[Exception]
6.3.5 3) Stripline Test
4) TEM Cell Test |
RE : 0.1 MHz ~ 2.5 GHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 400 MHz ~
2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV
MFI : 60 Hz ~ 30 kHz |
소재지-2 |
| SES E 922 VERSION:6:2016 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY
[Exception]
6.3.5 3) Stripline Test
4) TEM Cell Test |
RE : 100 kHz ~ 2.5 GHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 400 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV
MFI : 15 Hz ~ 150 kHz |
소재지-2 |
| SES E 922 VERSION:7:2017 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY |
RE : 100 kHz ~ 2.5 GHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
ALSE : 400 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV
MFI : DC, 15 Hz ~ 150 kHz
CE(AC Power)
: 0.15 MHz ~ 30 MHz
CE(Telecommunication Port) : 0.15 MHz ~ 30 MHz
Harmonic Current
Emission
: Rated current: ≤16 A
Voltage Fluctuation and Flicker
: Rated current: ≤16 A
EFT/Burst : Max ± 4 kV
Surge : Max ± 6 kV |
소재지-2 |
| EN 60601-2-4:2011+A1:2019 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-37:2008+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-33:2010+A12:2016 |
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-18:2015 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-10:2015+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-10:2015+A2:2024 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-1-2:2015+A1:2021 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-1-2:2007 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ANSI/AAMI/IEC 60601-1-2:2014+A1:2021 |
Medical electrical equipment
Part 1-2:General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-5:2015 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-54:2009+A2:2019 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-62:2015 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-33:2022 |
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-33:2010+A2:2015 |
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-28:2017 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-24:2012 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-2:2017+A1:2023 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-18:2009 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-10:2012+A1:2016+A2:2023 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and musclestimulators
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC TS 60601-4-2:2024 |
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-1-2:2014+A1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-1-2:2014 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-1-2:2007 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 80601-2-78:2020 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 80601-2-78:2020+A1:2024 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 60601-2-46:2019 |
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 60601-2-46:2024 |
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 60601-2-2:2018+A1:2024 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-65:2013+A1:2020+A2:2021 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-63:2015+A1:2019+A2:2021 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-37:2007+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-37:2024 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| SES E 922 VERSION:8:2018 |
전장품 전자파 적합성 시험방법 COMPONENT TEST METHOD OF ELECTROMAGNETIC COMPATIBILITY |
RE : 100 kHz ~ 2.5 GHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
MFI : DC, 15 Hz ~ 150 kHz
MFE : 20 Hz ~ 200 kHz
RE(MLA) : 0.15 MHz ~ 30 MHz
ALSE : 400 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz
CTI : (-150 ~ 100) V
CTE : (-100 ~ 75) V
ESD : ±(4 ~ 25) kV
MFI : DC, 15 Hz ~ 150 kHz
CE(AC Power)
: 0.15 MHz ~ 30 MHz
CE(Telecommunication Port) : 0.15 MHz ~ 30 MHz
Harmonic Current
Emission
: Rated current: ≤16 A
Voltage Fluctuation and Flicker
: Rated current: ≤16 A
EFT/Burst : Max ± 4 kV
Surge : Max ± 6 kV |
소재지-2 |
| EN 13309:2010 |
Construction machinery - Electromagnetic compatibility of machines with internal power supply
[Exception]
4.2 Specifications concerning broadband electromagnetic emission radiated from
construction machinery
4.3 Specifications concerning narrowband electromagnetic emission radiated from
construction machinery
4.4 Specifications concerning the immunity of construction machinery to electromagnetic
radiation
4.7.2 - Stripline Test
- TEM Cell Test |
RE : 30 MHz ~ 1 GHz
RI : 20 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz
ESD : ±(4 ~ 25) kV
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V |
소재지-2 |
| CISPR 25:2021 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
[Exception]
6.5 Radiated emission from
components/modules-TEM cell method
6.6 Radiated emission from
components/modules-Stripline method |
CE(Power Line) :
150 kHz ~ 108 MHz
CE(Signal Line) :
150 kHz ~ 245 MHz
RE:150 kHz ~2.5 GHz |
소재지-2 |
| KN 61000-4-4:2011 |
전기적 빠른 과도현상/버스트 내성 시험방법 |
EFT: Max ± 4 kV |
소재지-2 |
| KN 61000-4-5:2008 |
서지 내성 시험방법 |
Surge: Max ± 6 kV |
소재지-2 |
| KN 61000-4-6:2013 |
전도성 RF 전자기장 내성 시험방법 |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| KN 61000-4-8:2013 |
전원 주파수 자기장 내성 시험방법 |
Magnetic: 300 A/m |
소재지-2 |
| KS C 0262:2014 |
전기자기적합성(EMC) - 측정일반 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9610-4-11:2017 |
전자파적합성(EMC) - 제4-11부: 시험 및 측정기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) - 제4-11부: 시험 및 측정기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성 시험 |
ESD: Max ± 30 kV |
소재지-2 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성 시험 |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| KS C 9610-4-4:2017 |
전자파적합성(EMC) - 제4-4부: 시험 및 측정기술 - 전기적 빠른 과도현상, 버스트 내성 시험 |
EFT: Max ± 4 kV |
소재지-2 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) - 제4-4부: 시험 및 측정기술 - 전기적 빠른 과도현상, 버스트 내성 시험 |
EFT: Max ± 4 kV |
소재지-2 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정기술 - 서지 내성 시험 |
Surge: Max ± 6 kV |
소재지-2 |
| KS C 9610-4-5:2017 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정기술 - 서지 내성 시험 |
Surge: Max ± 6 kV |
소재지-2 |
| KS C 9610-4-5:2020 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정기술 - 서지 내성 시험 |
Surge: Max ± 6 kV |
소재지-2 |
| KS C 9610-4-6:2017 |
전자파적합성(EMC) - 제4-6부: 시험 및 측정기술 - 전도성 RF 전자기장 내성 시험 |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부: 시험 및 측정기술 - 전도성 RF 전자기장 내성 시험 |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) - 제4-8부: 시험 및 측정기술 - 전원 주파수 자기장 내성 시험 |
Magnetic: 300 A/m |
소재지-2 |
| KS C IEC 61000-4-18:2014 |
전기자기적합성(EMC) - 제4-18부: 시험 및 측정 기술 ― 감쇠 진동파 내성시험 |
(100 kHz, 1 MHz): 4 kV |
소재지-2 |
| KN 61000-4-11:2008 |
전압 강하, 순간 정전 내성시험방법 |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 61000-4-3:2011 |
방사성 RF 전자기장 내성 시험방법 |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| KN 61000-4-2:2013 |
정전기방전 내성 시험방법 |
ESD: Max ± 30 kV |
소재지-2 |
| SANS 61000-4-4:2011 |
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
EFT: Max ± 4 kV |
소재지-2 |
| SANS 61000-4-3:2008 |
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| SANS 61000-4-2:2009 |
Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: Max ± 30 kV |
소재지-2 |
| SANS 61000-3-3:2009 |
Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
16 A max. 단상전원 |
소재지-2 |
| SANS 61000-3-2:2009 |
Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| SANS 2335:2018 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| SANS 2332:2017 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS CISPR 22:2009+A1:2010 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS CISPR 24:2013+A1:2017 |
Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| CISPR 22:2008 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 24:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 55022:2010+AC:2011 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 55024:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 22:2009 |
정보기기류 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KN 24:2011 |
정보기기류 내성 시험 방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61204-3:2000 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61204-3:2018 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61204-3:2016 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 60:2008 |
전력선통신기기류 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test |
Magnetic: 300 A/m |
소재지-2 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| IEC 61000-4-6:2013 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| EN 61000-3-2:2014 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| EN 61000-3-3:2013 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
16 A max. 단상전원 |
소재지-2 |
| EN 61000-3-3:2013+A1:2019+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
16 A max. 단상전원 |
소재지-2 |
| EN 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: Max ± 30 kV |
소재지-2 |
| EN IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC)
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: Max ± 30 kV |
소재지-2 |
| EN 61000-4-3:2006+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| EN 61000-4-39:2017 |
Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test |
65 A/m |
소재지-2 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
EFT: Max ± 4 kV |
소재지-2 |
| EN 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Surge: Max ± 6 kV |
소재지-2 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) – Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test |
Magnetic: 300 A/m |
소재지-2 |
| EN IEC 61000-3-11:2019 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
I ≤ 32 A |
소재지-2 |
| EN IEC 61000-3-2:2019+A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| EN IEC 61000-3-2:2019+A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61000-4-11:2020+AC:2022-10 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61000-4-18:2019 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
(100 kHz, 1 MHz): 4 kV |
소재지-2 |
| EN 50130-4:2011+A1:2014 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ANSI C63.4a:2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz Amendment 1: Test Site Validation |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지-2 |
| ANSI C63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지-2 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| ETSI EN 301 489-1 V2.2.3 (2019-11) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard for ElectroMagnetic Compatibility |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ETSI EN 301 489-17 V3.3.1 (2024-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband and Wideband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ETSI EN 301 489-17 V3.2.4 (2020-09) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17: Specific conditions for
Broadband Data Transmission Systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ETSI EN 301 489-3 V2.1.1 (2019-03) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ETSI EN 301 489-3 V2.3.2 (2023-01) |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61000-3-11:2017 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
I ≤ 32 A |
소재지-2 |
| IEC 61000-3-2:2014 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| IEC 61000-3-2:2018 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| IEC 61000-3-2:2018+A1:2020 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| IEC 61000-3-2:2018+A1:2020+A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
16 A max. 단상전원 |
소재지-2 |
| IEC 61000-3-3:2013 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
16 A max. 단상전원 |
소재지-2 |
| IEC 61000-3-3:2013+A1:2017+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
16 A max. 단상전원 |
소재지-2 |
| IEC 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61000-4-18:2019 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
(100 kHz, 1 MHz): 4 kV |
소재지-2 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: Max ± 30 kV |
소재지-2 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ESD: Max ± 30 kV |
소재지-2 |
| IEC 61000-4-3:2006+A1:2007+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
RS: 30 V/m (80 MHz ~ 6 GHz) |
소재지-2 |
| IEC 61000-4-39:2017 |
Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test |
65 A/m |
소재지-2 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
EFT: Max ± 4 kV |
소재지-2 |
| IEC 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Surge: Max ± 6 kV |
소재지-2 |
| SANS 61000-4-5:2006 |
Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test |
Surge: Max ± 6 kV |
소재지-2 |
| IEC 61326-2-3:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 55014-1:2017+A11:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 55014-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 14-1:2017 |
가정용 전기기기 및 전동기기류의 장해방지시험 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KN 14-2:2017 |
가정용 전기기기 및 전동기기류 내성 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9814-1:2019 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부: 방출 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9814-1:2020 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부: 방출 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부: 방출 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9814-2:2019 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9814-2:2020 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 55014-1:2017 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-2:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-4:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical electrical equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS CISPR 14.1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS CISPR 14.1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1:Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 14-1:2016 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 14-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 12015:2020 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 12016:2013 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic : 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS B 6945:2019 |
전자기 적합성 - 엘리베이터, 에스컬레이터 및 수평 보행기 제품군 규격 - 내성 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic : 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS B 6955:2019 |
전자기 적합성 - 엘리베이터, 에스컬레이터 및 수평보행기 제품군 규격 - 방사 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KN 101:2016 |
소방용품 전자파적합성 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9992:2019 |
소방용품 전자파적합성 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS 61000.6.4:2020 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS 61000.6.2:2006 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS/NZS 61000.6.2:2022 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS/NZS 61000.6.4:2012 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 61000-6-2:2005 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61000-6-4:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KN 61000-6-2:2017 |
산업환경에서의 일반 내성 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-4:2010+A1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 60601-1-2:2020 |
의료용 전기기기 - 제1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항 - 보조표준: 전자파 장해 - 요구사항 및 시험 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-44:2009+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-45:2011+A2:2022 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-46:2023 |
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-46:2016 |
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-5:2009 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-54:2009+A2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-54:2022 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-62:2013 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-63:2012+A1:2017+A2:2021 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60601-2-65:2012+A1:2017+A2:2021 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 80601-2-77:2019+A1:2023 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 80601-2-77:2019 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 80601-2-78:2019 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 80601-2-78:2019+A1:2024 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 60601-1-2:2008 |
의료용 전기기기류 내성 시험방법
- 요구사항 및 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 60601-1-2:2014 |
의료용 전기기기 - 제1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항 - 보조표준: 전자파 장해 - 요구사항 및 시험 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 61000-6-4:2012 |
산업 환경에서의 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) - 제6-2부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS/NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS CISPR 32:2015+A1:2020 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IS/CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 55032:2015+A1:2020 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 55032:2015+A11:2020 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 32:2015 |
멀티미디어기기 전자파 장해방지 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KN 35:2015 |
멀티미디어기기 전자파 내성 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| MIL-STD-461F:2007 |
Requirements for the control of electromagnetic interference characteristics of subsystems and equipment
5.16 RE101, Radiated emissions, magnetic field, 30 Hz to 100 kHz.
5.19 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
[Exception]
5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz.
5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz.
5.6 CE106, conducted emissions, antenna terminal, 10 kHz to 40 GHz.
5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz.
5.11 CS106, conducted susceptibility, transients, power leads.
5.13 CS114, Conducted susceptibility, bulk cable injection, impulse excitation.
5.14 CS115, conducted susceptibility, damped sinusoidal transients, cables and power leads, 10 kHz to 100 MHz.
5.15 CS116, Conducted susceptibility, damped sinusoidal transients, cables and power leds, 10 kHz to 100 MHz
5.17 RE102, radiated emissions, electric field, 10 kHz to 18 GHz.
5.18 RE103, radiated emissions, antenna squrious and harmonic outpus, 10 kHz to 40 GHz
5.20 RS103, radiated susceptibility, electric field, 2 MHz to 40 GHz |
RE101, 30 Hz to 100 kHz
RS101, 30 Hz to 100 kHz |
소재지-2 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9832:2019 |
멀티미디어 기기 전자파 장해 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9832:2023 |
멀티미디어 기기 전자파 장해 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 장해 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9610-6-4:2017 |
전자파적합성(EMC) - 제6-4부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9610-6-4:2020 |
전자파적합성(EMC) - 제6-4부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) - 제6-4부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KN 11:2017 |
산업ᆞ과학ᆞ의료용(ISM) 기기 장해방지 시험방법
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
[Exception]
방사30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 55011:2016+A11:2020 |
Industrial, scientific and medical equipment. Radio-frequency disturbance characteristics. Limits and methods of measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 55011:2016+A1:2017+A2:2021 |
Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN IEC 55011:2025 |
Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 11:2009+A1:2010 |
Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 11:2015+A1:2016+A2:2019 |
Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 11:2015+A1:2016 |
Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
방사 30 m 법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| FCC Part 15 Subpart B:2026 |
Radio frequency devices |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지-2 |
| FCC Part 18:2026 |
Industrial, scientific, and medical equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 40 GHz |
소재지-2 |
| KS X 3143:2020 |
가정용 무선 전력 전송기기 전자파장해 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| VCCI-CISPR 32:2016 |
Electromagnetic compatibility of multimedia equipment – Emission Requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| ICES-003 Issue 7:2020 |
Information Technology Equipment (including Digital Apparatus) |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 18 GHz |
소재지-2 |
| EN 60601-2-45:2011+A2:2024 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests |
ESD: ± 30 kV
RS: 80 MHz ~ 6 GHz
EFT: ± 4 kV
Surge: ± 6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 100 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| SANS 61000-4-6:2017 |
Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: Max 10 V
(0.15 MHz ~ 230 MHz) |
소재지-2 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS/NZS 61000.6.3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS 61000.6.3:2012 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| AS/NZS 61000.6.1:2006 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| AS/NZS 61000.6.1:2025 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 50121-3-2:2016+A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
(제외)
현장시험 RS |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
Surge: ±2 kV
CS: 0.15 MHz ~ 80 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 50121-4:2016+A1:2019 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 50121-5:2017+A1:2019 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 62236-5:2018 |
철도용 전기자기적합성 - 제5부: 고정 전력공급 설비와 장치의 방출 및 내성 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 62236-5:2006 |
철도용 전기자기적합성 - 제5부: 고정 전력공급 설비와 장치의 방출 및 내성 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 62236-4:2018 |
철도용 전기자기적합성 - 제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 62236-4:2006 |
철도용 전기자기적합성 - 제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 62236-3-2:2018 |
철도용 전기자기적합성 - 제3-2부: 철도차량 ― 장치 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 62236-3-2:2006 |
철도용 전기자기적합성 - 제3-2부: 철도차량 ― 장치 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C IEC 60571:2020 |
철도 적용 - 철도 차량용 전자기기 |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
Surge: ±2 kV
CS: 0.15 MHz ~ 80 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) %
O.V: (0 ~ 425) V
Voltage Variation: V 40 % Variation (1.5 s) F 10 % Variation (5 s) |
소재지-2 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기 |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
Surge: ±2 kV
CS: 0.15 MHz ~ 80 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) %
O.V: (0 ~ 425) V
Voltage Variation: V 40 % Variation (1.5 s) F 10 % Variation (5 s) |
소재지-2 |
| KN 51:2019 |
전기철도기기류의 전자파적합성 시험방법 |
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic : 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 50:2019 |
전기철도기기류의 전자파적합성 시험방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-2 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
Magnetic: 300 A/m
Dip: (0 ~ 100) % |
소재지-2 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
(제외)
현장시험 RS |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
Burst: ±2 kV
Surge: ±2 kV
CS: 0.15 MHz ~ 80 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 60571:2012 |
Railway applications - Electronic equipment used on rolling stock |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 50155:2021 |
Railway applications. Rolling stock. Electronic equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 50155:2017 |
Railway applications. Rolling stock. Electronic equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
Burst: ±4 kV
Surge: ±6 kV
CS: 0.15 MHz ~ 230 MHz
Magnetic: 300 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| SANS 61000-4-8:2009 |
Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
Magnetic: 300 A/m |
소재지-2 |
| SANS 61000-4-11:2005 |
Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 62493:2015+A1:2022 |
Assessment of lighting equipment related to human exposure to electromagnetic fields |
9 kHz ~ 300 MHz |
소재지-2 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61547:2009 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 61547:2023 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN IEC 55015:2019+A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
[Exception]
4.2 Insertion loss
7 Method of insertion loss measurement |
CE: 9 kHz ~ 30 MHz
RE:30 MHz ~ 1 000 MHz |
소재지-2 |
| EN 62493:2015+A1:2022 |
Assessment of lighting equipment related to human exposure to electromagnetic fields |
9 kHz ~ 300 MHz |
소재지-2 |
| EN 61547:2009 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| EN 55015:2013+A1:2015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
[Exception]
4.2 Insertion loss
7 Method of insertion loss measurement |
CE: 9 kHz ~ 30 MHz
RE:30 MHz ~ 300 MHz |
소재지-2 |
| CISPR 15:2018+A1:2024 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
[Exception]
4.2 Insertion loss
7 Method of insertion loss measurement |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 6 GHz |
소재지-2 |
| ICES-005 Issue 5:2018 |
Lighting Equipment |
CE: 0.15 MHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz |
소재지-2 |
| KN 15:2019 |
조명기기 장해방지 시험방법
[Exception]
4.2 삽입 손실
7. 삽입 손실의 측정방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 1 GHz |
소재지-2 |
| KN 61547:2012 |
조명기기류에 대한 내성 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9547:2017 |
일반 조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9547:2023 |
일반 조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9815:2023 |
조명기기 및 유사기기의 무선 방해 특성의 허용기준 및 측정 방법
[Exception]
4.2 삽입 손실
7 삽입 손실의 측정방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 1 GHz |
소재지-2 |
| KS C 9815:2019 |
조명기기 및 유사기기의 무선 방해 특성의 허용기준 및 측정 방법
[Exception]
4.2 삽입 손실
7 삽입 손실의 측정방법 |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 1 GHz |
소재지-2 |
| KS C 9547:2020 |
일반 조명기기-전자파적합성(EMC) 내성 요구사항 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) — 제6-3부: 일반표준 — 주거용, 상업용 및 경공업 환경에서의 전자파 방출 표준 |
CE: 9 kHz - 30 MHz
RE: 9 kHz - 18 GHz |
소재지-2 |
| KS C 9610-6-3:2017 |
전자파적합성(EMC) - 제6-3부: 일반표준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE: 9 kHz - 30 MHz
RE: 9 kHz - 18 GHz |
소재지-2 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) - 제6-1부: 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| KN 61000-6-3:2012 |
주거, 상업 및 경공업 환경에서의 장해방지 시험방법 |
CE: 9 kHz - 30 MHz
RE: 9 kHz - 18 GHz |
소재지-2 |
| KN 61000-6-1:2017 |
주거, 상업 및 경공업 환경에서의 일반 내성 시험방법 |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IEC 61000-6-3:2006+A1:2010 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| IEC 61000-6-3:2026 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential locations |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| QCVN 18:2022/BTTTT |
National technical regulation on General Electromagnetic Compatibility for Radio Communications Equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| QCVN 96:2015/BTTTT |
National technical regulationon electromagnetic compatibilityfor Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| QCVN 112:2017/BTTTT |
National technical regulation on general electromagnetic compatibility for radio broadband data transmission equipment |
ESD: Max ± 30 kV
RS: Max 10 V/m
(80 MHz ~ 6 GHz)
EFT: Max ± 4 kV
Surge: Max ± 6 kV
CS: Max 10 V
(0.15 MHz ~ 230 MHz)
Magnetic: Max 30 A/m
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| QCVN 118:2018/BTTTT |
National technical regulation on Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지-2 |
| EN 61000-4-34:2007+A2:2025 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| IEC 61000-4-34:2005+A1:2009+A2:2025 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
Voltage Dip: (0 ~ 100) % |
소재지-2 |
| ▶ 에너지효율 |
| 기후에너지환경부 고시 제2026-26호(2026.01.23.) |
효율관리기자재 운용규정
제4조(효율관리 기자재의 지정 및 범위와 측정방법 등) ①의
20. (어댑터·충전기)
26. (텔레비전수상기)
37. (셋톱박스)
42. (사이니지 디스플레이)
44. (모니터)
49.(컴퓨터)
50.(복합기)
52.(비데) |
Input Voltage: (0 - 600) V
Frequency: (50 - 60) Hz
Current: (0 - 20) A
Load: DC 60 V, 40 A |
소재지-2 |
| 기후에너지환경부 고시 제2026-25호(2026.01.23.) |
대기전력저감프로그램 운용규정
[제외항목]
제3조(대기전력저감대상제품의 지정 등)
① 의 18. 모뎀, 19. 홈게이트웨이 |
Input Voltage: (0 - 600) V
Frequency: (50 - 60) Hz
Current: (0 - 20) A
Load: DC 60 V, 40 A |
소재지-2 |
| ▶ 환경 및 신뢰성 |
| IEC 60255-21-3:1993 |
Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection
equipment - Section 3: Seismic tests
[Exception]
5. Requirements for biaxial multi-frequency random
seismic test (method B) |
진동 (1 ∼ 35) Hz, (5 ~ 20) m/s² |
소재지-2 |
| IEC 60255-21-2:1988 |
Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection
equipment - Section Two: Shock and bump tests |
충격 (50 ~ 300) m/s² , (11 ~ 16) ms |
소재지-2 |
| IEC 60255-21-1:1988 |
Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection
equipment - Section One: Vibration tests (sinusoidal) |
진동 (10 ∼ 150) Hz, (5 ~ 20) m/s² |
소재지-2 |
| IEC 60255-1:2022 |
Measuring relays and protection equipment - Part 1: Common requirements |
온도 (-65 ∼ 175) °C
습도 (45 ~ 98) % R.H.
진동 (10 ∼ 150) Hz, (5 ~ 20) m/s²
충격 (50 ~ 300) m/s² , (11 ~ 16) ms
절연저항
DC 500 / 1 000 V
(10 ~ 9 990) MΩ
내전압
AC (500 ~ 5 000) V
DC (500 ~ 5 000) V
보호본딩
(16 ~ 40) A, 0.1 Ω |
소재지-2 |
| IEC 60068-2-78:2025 |
Environmental testing-Parts 2-78 : Tests-Test Cab : Damp heat, steady state |
온도 습도 30 °C 93 % R.H. 30 °C 85 % R.H. 40 °C 93 % R.H. 40 °C 85 % R.H. |
소재지-2 |
| IEC 60068-2-64:2019 |
Environmental testing-Parts 2-64 : Tests-Test Fh : Vibration, broadband random and guidance |
진동 (1 ∼ 2 000) Hz (0.98 ∼ 300) m/s² |
소재지-2 |
| IEC 60068-2-6:2007 |
Environmental testing -Part 2-6 : Tests-Test Fc : Vibration (sinusoidal) |
진동 (1 ∼ 2 000) Hz, (0.98 ∼ 490) m/s² |
소재지-2 |
| IEC 60068-2-31:2008 |
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
[Exception]
5.1 Drop and topple
5.3 Free fall repeated |
낙하높이 (250 ∼ 1 500) mm |
소재지-2 |
| IEC 60068-2-30:2025 |
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic(12 h + 12 h cycle) |
온도 습도(25 ∼ 55) °C (45 ∼ 98) % R.H. |
소재지-2 |
| IEC 60068-2-27:2008 |
Environmental testing-Parts 2-27 : Tests-Test Ea and guidance : Shock
[Exception]
4.1.1 Trapezoidal pulse |
충격 (50 ∼ 500) m/s² |
소재지-2 |
| IEC 60068-2-2:2025 |
Environmental testing-Part 2-2 : Tests-Test B : Dry
heat
[Exception]
6.5.2 Temperature
(200 ~ 1 000) ℃ |
온도 (30 ∼ 175) °C |
소재지-2 |
| IEC 60068-2-14:2023 |
Environmental testing -Part 2-14: Tests –Test N: Change of temperature
7. Test Na: Rapidchange of temperature with prescribed time of transfer
8. Test Nb: Change of temperature with specified rate of change |
온도 (-65 ∼ 125) °C |
소재지-2 |
| IEC 60068-2-11:2021 |
Environmental testing - Part 2-11: Tests - Test Ka: Salt mist |
염수 35 °C, NaCl : 5 % |
소재지-2 |
| IEC 60068-2-1:2025 |
Environmental testing-Part 2-1 : Tests-Test A : Cold |
온도 (-65 ∼ 5) °C |
소재지-2 |
| KS C IEC 60068-2-6:2015 |
환경시험-제2-6부: 시험-시험 Fc:진동(정현파) |
진동 (0.1 ∼ 2 000) Hz, (0.98 ∼ 490) m/s² |
소재지-2 |
| KS C IEC 60068-2-64:2019 |
환경 시험 - 제2-64부: 시험 - 시험 Fh: 광대역 불규칙 진동 시험 및 지침 |
진동 (1 ~ 2 000) Hz (14.9 ~ 300) m/s² |
소재지-2 |
| KS C IEC 60068-2-78:2012 |
환경 시험 - 제2-78부: 시험 - 시험 Cab: 안정 상태의 내습성 시험 |
온도 습도 30 °C 93 % R.H. 30 °C 85 % R.H. 40 °C 93 % R.H. 40 °C 85 % R.H. |
소재지-2 |
| KS C IEC 60255-1:2009 |
측정 계전기와 보호 장치 - 제1부: 공통 요구사항 |
온도 (-65 ∼ 175) °C
습도 (45 ~ 98) % R.H.
진동 (10 ∼ 150) Hz, (5 ~ 20) m/s²
충격 (50 ~ 300) m/s², (11 ~ 16) ms
절연저항
DC 500 / 1 000 V
(10 ~ 9 990) MΩ
내전압
AC (500 ~ 5 000) V
DC (500 ~ 5 000) V
보호본딩
(16 ~ 40) A, 0.1 Ω |
소재지-2 |
| KS C IEC 60255-21-1:1988 |
전기계전기 - 제21-1부: 보호 계전기와 보호 기기의
진동, 충격, 충돌, 지진 시험-진동 시험 용어 |
진동 (10 ∼ 150) Hz, (5 ~ 20) m/s² |
소재지-2 |
| KS C IEC 60255-21-2:1988 |
전기계전기 - 제21-2부: 보호 계전기와 보호 기기의
진동, 충격, 충돌, 지진 시험-지진 시험 |
충격 (50 ~ 300) m/s² (11 ~ 16) ms |
소재지-2 |
| KS C IEC 60255-21-3:1993 |
전기계전기 - 제21-3부: 보호 계전기와 보호 기기의
진동, 충격, 충돌, 지진 시험-지진시험
[제외항목]
5. 이축 다중-주파수 랜덤 지진 시험 |
진동 (1 ∼ 35) Hz (5 ~ 20) m/s² |
소재지-2 |
| KS C IEC 60255-27:2013 |
전기 계전기-제2-27부: 제품 안전 요구사항
10.6.4.3 교류/직류 절연전압시험
10.6.4.4 절연저항 |
절연저항
DC 500 / 1 000 V
(10 ~ 9 990) MΩ
내전압
AC (500 ~ 5 000) V
DC (500 ~ 5 000) V |
소재지-2 |
| KS C IEC 60529:2013 |
외함의 밀폐 보호등급 구분(IP코드)
[제외항목]
IPX1, IPX2, IPX9 |
Probe: (1 ~ 500) mm
Depression: Less than 2 kPa
Water flow rate:
(0.56 ~ 100) L |
소재지-2 |
| BS EN 60529:1992+A2:2013 |
Degrees of protection provided by enclosures(IP Code)
[Exception]
IPX1, IPX2, IPX9 |
Probe: (1 ~ 500) mm
Depression: Less than 2 kPa
Water flow rate: (0.56 ~ 100) L |
소재지-2 |
| IEC 60068-2-52:2017 |
Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
[Exception] Test method7,8 |
염수(15 ∼ 35) °C NaCl : 5 % 40 °C 93 % R.H. 23 °C (45 ∼ 55) % R.H. |
소재지-2 |
| IEC 60068-2-38:2021 |
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
온도 습도 (-10 ∼ 65) °C (10 ∼ 98) % R.H. |
소재지-2 |
| KS C IEC 60068-2-38:2021 |
환경시험-제2-38부: 시험-시험 Z/AD: 합성 온도/습도 사이클 시험 |
온도 습도(-10 ∼ 65) °C (15 ∼ 98) % R.H. |
소재지-2 |
| KS C IEC 60068-2-52:2017 |
환경시험-제2-52부 : 시험-시험 Kb : 염수분무,
사이클(염화나트륨 용액)
[제외항목]
9.4.8항 시험방법 7
9.4.9항 시험방법 8 |
염수 (15 ∼ 35) °C, NaCl : 5 %, 40 °C 93 % R.H., 23 °C, (45 ∼ 55) % R.H. |
소재지-2 |
| IEC 60255-27:2013 |
Measuring relays and protection equipment - Part 27: Product safety requirements
10.6.4.3 AC or d.c. dielectric voltage test
10.6.4.4 Insulation resistance |
내전압
AC (500 ~ 5 000) V
DC (500 ~ 5 000) V
절연저항
DC 500 V
(10 ~ 9 990) MΩ |
소재지-2 |
| IEC 60255-27:2023 |
Measuring relays and protection equipment - Part 27: Product safety requirements
9.6.4.3 AC or DC dielectric voltage test
9.6.4.4 Insulation resistance |
내전압
AC (500 ~ 5 000) V
DC (500 ~ 5 000) V
절연전항
DC 500 V
(1 ~ 9 990) MΩ |
소재지-2 |
| IEC 60529:2013 |
Degrees of protection provided by enclosures(IP Code)
[Exception]
IPX1, IPX2, IPX9 |
Probe: (1 ~ 500) mm
Depression: Less than 2 kPa
Water flow rate:(0.56 ~ 100) L |
소재지-2 |
| IACS UR E10 Rev.8:2022 |
Type testing condition for equipment covered by E10.1
1. Visual inspection
2. Performance test
3. External power supply failure
4. Power supply variations
[Exception]
b) pneumatic and hydraulic
5. Dry Heat
6. Damp Heat
7. Vibration
9. Insulation resistance
10. High voltage
11. Cold
12. Salt mist |
온도 습도 (-25 ~ 70) °C 95 % R.H.
진동 (2 ~ 100) Hz (0.7 ~ 4) g
절연저항 DC (24 ~ 500) V (1 ~ 9 990) MΩ
내전압 AC(500 ~ 2 500) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| IACS UR E10 Rev.9:2023 |
Type testing condition for equipment covered by E10.1
1. Visual inspection
2. Performance test
3. External power supply failure
4. Power supply variations
[Exception]
b) pneumatic and hydraulic
5. Dry Heat
6. Damp Heat
7. Vibration
9. Insulation resistance
10. High voltage
11. Cold
12. Salt mist |
온도 습도 (-25 ~ 70) °C 95 % R.H.
진동 (2 ~ 100) Hz (0.7 ~ 4) g
절연저항 DC (24 ~ 500) V (1 ~ 9 990) MΩ
내전압 AC(500 ~ 2 500) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| ES95400-10:2012 |
자동차용 전자기기환경시험
3.5 환경신뢰성시험
3.6 진동내구시험
3.7 환경내구시험
3.8 한계시험
[제외항목]
3.5.9 먼지시험
3.5.11 내액시험
3.5.12 내수시험
3.5.14 내오존시험
3.7.4 버튼조작 내구시험 |
온도 습도 (-70 ~ 180) °C (20 ∼ 98) % R.H.
염수 (35 ∼ 40) °C NaCl : 5 %
진동 (10 ∼ 2 000) Hz (4.9 ~ 392) m/s² |
소재지-2 |
| GMW 3172:2012 |
General Specification for Electrical / Electronic, Components - Environmental / Durability
9.3 Mechanical
9.3.1 Vibration with Thermal Cycling
9.3.2 Mechanical Shock - Pothole
9.3.3 Mechanical Shock - Collision
9.3.4 Mechanical Shock - Closure Slam
9.4 Climatic
9.4.1 High Temperature Degradation
9.4.3 Power Temperature Cycle (PTC)
9.4.5 Humid Heat Cyclic (HHC)
9.4.6 Humid Heat Constant (HHCO) |
진동 (10 ∼ 2 000) Hz (20 ∼ 400) m/s²
온도 습도 (-65 ∼ 150) °C (10 ∼ 98) % R.H. |
소재지-2 |
| KS R 1034:2023 |
자동차 부품 진동 시험 방법 |
진동 (5 ∼ 2 000) Hz, (4.9 ∼ 490) m/s² |
소재지-2 |
| KS R 9186:2021 |
철도 신호 보안 부품 - 진동 시험 방법 |
진동 (10 ∼ 1 000) Hz (8.92 ∼ 316) m/s² |
소재지-2 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험 방법 |
진동 (1 ∼ 70) Hz, (4.9 ∼ 245) m/s² |
소재지-2 |
| KS C IEC 61373:2010 |
철도적용 - 철도차량 장치 - 충격 및 진동 시험 |
진동 (2 ∼ 500) Hz (0.37 ∼ 144) m/s²
충격 (30 ∼ 300) m/s² |
소재지-2 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기
12.2.4 냉각시험
12.2.5 내열성시험
12.2.6 내습 사이클시험
12.2.10 절연시험
12.2.12 진동, 충격 및 충돌시험
12.2.15 저온저장 시험 |
진동 (2 ~ 500) Hz (0.37 ~ 144) m/s²
온도, 습도 (-40 ~ 85) °C (80 ~ 95) % R.H.
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
충격 (30 ~ 300) m/s² |
소재지-2 |
| IEC 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests |
진동 (2 ∼ 500) Hz (0.37 ~ 144) m/s²
충격 (30 ∼ 300) m/s² |
소재지-2 |
| IEC 60571:2012 |
Railway applications - Electronic equipment used on rolling stock
12.2.4 cold
12.2.5 dry
12.2.6 damp heat
12.2.10 Insulation
12.2.12 Vibration, shock and bump test
12.2.15 Low temperature storage test |
진동 (2 ~ 500) Hz (0.37 ~ 144) m/s²
온도 습도 (-40 ~ 85) °C (80 ~ 95) % R.H.
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
충격 (30 ~ 300) m/s² |
소재지-2 |
| EN 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests |
진동(2 ∼ 500) Hz (0.37 ∼ 144) m/s²
충격(30 ∼ 300) m/s² |
소재지-2 |
| EN 50155:2021 |
Railway applications - Electronic equipment used on rolling stock
13.4.4 Low temperature start-up test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Insulation test
13.4.8 Cyclic damp heat test
13.4.10 Shock and vibration test
13.4.13 Salt mist test |
온습도 (-40 ∼ 100) °C (45 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (2 ∼ 500) Hz (0.37 ∼ 144) m/s²
충격 (30 ∼ 300) m/s²
절연저항 DC 500 V (20 ~ 9 990) MΩ
내전압 AC (500 ~ 2 200） V |
소재지-2 |
| MIL-STD-810H:2022 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.7 High Temperature
502.7 Low Temperature
503.7 Temperature Shock
507.6 Humidity
509.8 Salt Fog / Corrosive Environments
514.8 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked -Loose Cargo
Category 6 -Truck/Trailer/Tracked -Large Assembly
Cargo
516.8 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.8 Gunfire Vibration Procedure III
512.6 Immersion ProcedureⅠImmersion
520.5 Temperature, Humidity, Vibration and Altitude
[Exception]
Altitude
528.1 Mechanical Vibrations of Shipboard Equipment
(Type 1 - Environmental Vibration) |
온도 (-70 ∼ 150) °C (20 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
침수 깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-810H:2019 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.7 High Temperature
502.7 Low Temperature
503.7 Temperature Shock
507.6 Humidity
509.7 Salt Fog
514.8 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked -Loose Cargo
Category 6 -Truck/Trailer/Tracked -Large Assembly
Cargo
516.8 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.8 Gunfire Vibration Procedure III
512.6 Immersion ProcedureⅠImmersion
520.5 Temperature, Humidity, Vibration and Altitude
[Exception]
Altitude
528.1 Mechanical Vibrations of Shipboard Equipment
(Type 1 - Environmental Vibration) |
온도 (-70 ∼ 150) °C (20 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
침수 깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-810G:2014 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.6 High Temperature
502.6 Low Temperature
503.6 Temperature Shock
507.6 Humidity
509.6 Salt Fog
514.7 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked -Loose Cargo
Category 6 -Truck/Trailer/Tracked -Large Assembly
Cargo
516.7 Shock
[Exception]
Procedure I-Functional
Shock(SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.7 Gunfire Vibration Procedure III
512.6 Immersion ProcedureⅠImmersion
520.4 Temperature, Humidity, Vibration and Altitude
[Exception]
Altitude
528.1 Mechanical Vibrations of Shipboard Equipment (Type 1 - Environmental Vibration) |
온도 (-70 ∼ 150) °C (20 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
침수 깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-810G:2008 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.5 High Temperature
502.5 Low Temperature
503.5 Temperature Shock
507.5 Humidity
509.5 Salt Fog
514.6 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked - Loose Cargo
Category 6 -Truck/Trailer/Tracked - Large Assembly
Cargo
516.6 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.6 Gunfire Vibration Procedure III
512.5 Immersion ProcedureⅠImmersion
520.3 Temperature, Humidity, Vibration and Altitude
[Exception]
Altitude
528 Mechanical Vibrations of Shipboard Equipment (Type 1 – Environmental Vibration) |
온도 (-70 ∼ 150) °C (20 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
침수 깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-810F:2003 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.4 High Temperature
502.4 Low Temperature
503.4 Temperature Shock
507.4 Humidity
509.4 Salt Fog
514.5 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked - Loose Cargo
Category 6 -Truck/Trailer/Tracked - Large Assembly Cargo
516.5Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.5 Gunfire Vibration Procedure Ⅳ
512.4 Immersion ProcedureⅠImmersion
520.2 Temperature, Humidity, Vibration and Altitude
[Exception]
Altitude |
온도 (-70 ∼ 150) °C (20 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
침수 깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-810F:2000 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.4 High Temperature
502.4 Low Temperature
503.4 Temperature Shock
507.4 Humidity
509.4 Salt Fog
514.5 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked - Loose Cargo
Category 6 -Truck/Trailer/Tracked - Large Assembly Cargo
516.5 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.5 Gunfire Vibration Procedure Ⅳ
512.4 Immersion ProcedureⅠImmersion
520.2 Temperature, Humidity, Vibration and Altitude
[Exception]
Altitude |
온도 (-70 ∼ 150) °C (20 ∼ 98) % R.H.
염수 35 °C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
침수 깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-810C:1975 |
Environmental Test Methods
501.1 High Temperature
502.1 Low Temperature
503.1 Temperature Shock
507.1 Humidity
509.1 Salt Fog
512.1 Leakage
(Immersion)
(Exception)
3.2 Procedure II
3.3 Procedure III
3.4 Procedure IV
514.2 Vibration
516.2 Shock
[Exception]
3.4 Procedure II, Transit drop
test
3.6 Procedure IV, High
Intensity Test
3.7 Procedure V, Bench
handling Test
3.8 Procedure VI, Rail impact
Test
3.9 Related Shock Test
519.2 Gunfire Vibration
Aircraft |
온도 (-70 ∼ 150) °C
(20 ～ 98) %R.H.
염수 35°C NaCl : 5 %
진동 (1 ∼ 2 000) Hz (2 ∼ 400) m/s²
충격 Max 400 m/s²
깊이 : 1 000 mm |
소재지-2 |
| MIL-STD-202G:2002 |
Test Method Standard Electronic and Electrical Component Parts
101E Salt Atmosphere (Corrosion)
103B Humidity(Steady State)
106G Moisture Resistance
201A Vibration
204D Vibration, High Frequency
[Exception]
212A Acceleration
213B Shock (Specified Pulse)
214A Random Vibration |
염수 35 °C NaCl : 5 % (15 ∼ 40) °C (25 ∼ 95) % R.H.
온도 습도 (-70 ~ 180) °C (25 ∼ 98) % R.H.
진동(10 ∼ 2 000) Hz
충격 (150 ∼ 500) m/s² |
소재지-2 |
| MIL-STD-167-1A:2005 |
Mechanical Vibrations of Shipboard Equipment (Type 1 - environmental) |
진동 (4 ∼ 33) Hz (0.01 ~ 0.03) inch z-p |
소재지-2 |
| MIL-STD-167-1:1974 |
Mechanical Vibrations of Shipboard Equipment (Type 1 - environmental) |
진동 (4 ∼ 50) Hz (0.003 ~ 0.1) inch z-p |
소재지-2 |
| MIL-PRF-28800F:1996 |
Test Equipment for Use with Electrical and Electronic Equipment, General Specification for (Scope)
4.5.3.1c. Environmental stress screening(random vibration)
4.5.3.1d. Environmental stress screening(temperature cycling)
4.5.5.1 Temperature and Humidity Tests
4.5.5.3.1 Random Vibration Test
4.5.5.3.2 Sinusoidal Vibration Test
4.5.5.4.1 Functional Shock Test |
진동 (10 ∼ 2 000) Hz 300 m/s²
온도 습도 (-51 ~ 71) °C (10 ∼ 98) % R.H. |
소재지-2 |
| NK:2021 |
Guidance For The Approval And Type Approval of Materials And Equipment For Marine Use
(Scope)
Part 7 Control And Instrumentation Equipment And
Electrical Installations
1.3 Environmental Test (Table 7.1-1(a) Environmental
Test Items, Testing Conditions, Methods, and Criteria)
Dry Heat Test
Damp Heat Test
Vibration Test
Cold Test
Insulation resistance test
High voltage test
Salt mist test |
온도 습도 (-70 ~ 150) °C 95 % R.H.
전원 AC (1 ~ 300) V 2 kVA 1.5 s / 5 s / 30 s / 300 s DC (1 ~ 400) V 1 kV
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H.
난연성 불꽃길이 (12 ± 1) mm |
소재지-2 |
| LR:2021 |
Performance and Environmental Test Specification for
the following Environmentally Tested Products used in
Marine Applications: Electrical Equipment Control and
Monitoring Equipment Instrumentation and Internal
Communication Equipment Programmable Electronic
Systems
(Scope)
Section 12 Vibration Test 1
Section 13 Vibration Test 2
Section 14 Humidity Test 1–Cyclic
Section 14 Humidity Test 2–Steady State
Section 17 Dry Heat Test
Section 18 Low Temperature Test
Section 19 High Voltage Test |
온도, 습도(-70 ~ 150) °C, 95 % R.H.
진동 (2 ~ 100) Hz, (7 ~ 40) m/s² |
소재지-2 |
| KS C IEC 60068-2-1:2007 |
환경 시험 - 제2-1부: 시험 - 시험 A: 내한성 시험 |
온도 (-65 ∼ 5) °C |
소재지-2 |
| KS C IEC 60068-2-11:2021 |
환경시험-제2-11부: 시험-시험 Ka: 염수분무시험 |
염수 35 °C, NaCl : 5 % |
소재지-2 |
| KS C IEC 60068-2-14:2023 |
환경시험 - 제2-14부: 시험-시험 N: 온도 변화
7시험 Na: 급격한 온도 변화
8시험 Nb: 규정된 변화율에 따른 온도 변화 |
온도 (-65 ∼ 125) °C |
소재지-2 |
| KS C IEC 60068-2-2:2007 |
환경시험 - 제2-2부: 시험-시험 B: 내열성시험 |
온도 (30 ∼ 175) °C |
소재지-2 |
| KS C IEC 60068-2-27:2008 |
환경시험-제2-27부:시험-시험 Ea와 지침: 충격 시험
[제외항목]
1. 가혹도 (2 000 ~100 000) m/s²
2. 표1 사다리꼴 파형 |
충격 (50 ∼ 500) m/s² |
소재지-2 |
| KS C IEC 60068-2-30:2005 |
환경 시험 - 제2-30부: 시험-시험 Db와 지침 : 주기적 내습 (12 h + 12 h 주기) |
온도, 습도 (25 ∼ 55) °C, (45 ∼ 98) % R.H. |
소재지-2 |
| KS C IEC 60068-2-31:2008 |
환경 시험 - 제2-31부: 시험 - 시험 Ec: 주로 장비형
시편에 사용하는 거친 취급시 충격
[제외항목]
5.1 떨어짐과 넘어짐
5.3 반복자유 낙하 |
낙하높이 (250 ∼ 1 500) mm |
소재지-2 |
| KS C IEC 60068-2-67:2019 |
환경 시험 - 제2-67부: 시험 - 시험 Cy:주로 부품을 대상으로 하는 습열, 정상 상태, 가속 시험 |
온도, 습도 85 °C, 85 % R.H. |
소재지-2 |
| IEC 60068-2-67:2019 |
Environmental testing – Part 2-67: Tests – Test Cy: Damp heat, steady state, accelerated test primarily intended for components |
온도, 습도 85 °C, 85 % R.H. |
소재지-2 |
| KS C IEC 60068-2-61:1991 |
환경시험-제2-61부:시험방법-시험Z/ABDM:일련내후성
<제외항목>
8.2.4 단계 4(선택적):저기압 |
온도, 습도 (65 ∼ 175) °C, (45 ∼ 98) % R.H. |
소재지-2 |
| BV:2021 |
Rules for the Classification of Steel Ships
(Scope)
Section 6 Testing
5. Dry Heat
6. Damp Heat
7. Vibration
9. Insulation Resistance
10. High Voltage
11. Cold
12. Salt mist |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| DNV:2006 |
Environmental Test Specification For Instrumentation And Automation Equipment
[Exception]
3.6.2.3 Performance test
3.6.3.5 Test result
3.7.2.3 Performance test
3.8.2.5 Performance test
3.8.3.4 Performance test
3.9.2.3 Performance test
3.12 Insulation Resistance |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
소재지-2 |
| DNV:2021 |
Environmental Test Specification For Instrumentation And Automation Equipment
2. Visual inspection
3. Performance test
6. Vibration tests
7. Dry Heat test
8. Damp Heat test
9. Cold test
10. Salt mist
12. Insulation resistance test
13. High voltage test |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC (48 ~ 500) V, (1 ~ 9 990) MΩ
내전압 AC (500 ~ 2 500) V |
소재지-2 |
| EN 60945:2002 |
Maritime navigation and radio communication equipment and systems. General requirements. Methods of testing and required test results
[Exception]
8.2.1.3 Required result
8.2.2.3 Required result
8.3.1.3 Required result
8.4.2.3 Required result
8.7.3 Required result
8.12.4 Required result |
온도 습도 (-30 ∼ 70) °C 93 % R.H.
진동 (2 ∼ 100) Hz
염수 NaCl : 5 % 40 °C (90 ∼ 95) % R.H. |
소재지-2 |
| KS C IEC 60092-504:2001 |
선박용 전기설비-제504부 : 특별사항-제어 및 사용
5. 환경 형식 시험 변수
표 1 - 형식 시험, 시험 절차 및 시험 조건
5. 절연저항
6. 점진적 온도 변화에 관한 냉각
7. 점진적 온도 변화에 관한 건조열
8. 습기 열, 주기(12h+12h cycle)
9. 염수 분무
10. 진동시험(사인파) |
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
온도 습도 (-25 ∼ 100) °C (45 ∼ 98) % R.H.
염수 (15 ∼ 35) °C NaCl : 5 % 40 °C 93 % R.H. 23 °C (45 ∼ 55) % R.H.
진동 (2 ∼ 2 000) Hz |
소재지-2 |
| IEC 60092-504:2016 |
Electrical installation ships - Part 504: - Automation, control and instrumentation
5. Environmental type testing parameter
Table1-Type tests, test procedures and severities
5. Insulation resistance
6. Cold with gradual change of temperature
7. Dry heat with gradual change of temperature
8. Damp heat, cyclic(12h+12h cycle)
9. Salt mist
10. Vibration(sinusoidal) |
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
온도 습도 (-25 ∼ 100) °C (45 ∼ 98) % R.H.
염수 (15 ∼ 35) °C NaCl : 5 % 40 °C 93 % R.H. 23 °C (45 ∼ 55) % R.H.
진동 (2 ∼ 2 000) Hz |
소재지-2 |
| IEC 60945:2002 |
Maritime navigation and radio communication
equipment and systems - General requirements - Methods of testing and required test results
[Exception]
8.2.1.3 Required result
8.2.2.3 Required result
8.3.1.3 Required result
8.4.2.3 Required result
8.7.3 Required result
8.12.4 Required result |
온도 습도 (-30 ∼ 70) °C 93 % R.H.
진동 (2 ∼ 100) Hz
염수 NaCl : 5 % 40 °C (90 ∼ 95) % R.H. |
소재지-2 |
| KR:2020 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
1. 외관검사
2. 성능시험
3. 전원상실 시험
4. 전원변동 시험
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험
13. 염수분무시험
22. 난연성시험 |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
전원 AC (1 ~ 300) V 2 kVA 1.5 s / 5 s / 30 s / 300 s DC (1 ~ 400) V 1 kV
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC (500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H.
난연성 불꽃길이 (12 ± 1) mm |
소재지-2 |
| KR:2021 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
1. 외관검사
2. 성능시험
3. 전원상실 시험
4. 전원변동 시험
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험
13. 염수분무시험
22. 난연성시험 |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (0.7 ~ 4.0) g
전원 AC (1 ~ 300) V 2 kVA 1.5 s / 5 s / 30 s / 300 s DC (1 ~ 400) V 1 kV
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H.
난연성 불꽃길이 (12 ± 1) mm |
소재지-2 |
| KR:2022 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
1. 외관검사
2. 성능시험
3. 전원상실 시험
4. 전원변동 시험
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험
13. 염수분무시험
22. 난연성시험 |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| KR:2023 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
1. 외관검사
2. 성능시험
3. 전원상실 시험
4. 전원변동 시험
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험
13. 염수분무시험
22. 난연성시험 |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| KR:2024 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
1. 외관검사
2. 성능시험
3. 전원상실 시험
4. 전원변동 시험
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험
13. 염수분무시험
22. 난연성시험 |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| KR:2025 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
1. 외관검사
2. 성능시험
3. 전원상실 시험
4. 전원변동 시험
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험
13. 염수분무시험
22. 난연성시험 |
온도 습도 (-70 ~ 150) °C 95 % R.H.
진동 (2 ~ 100) Hz (7 ~ 40) m/s²
절연저항 DC 500 / 1 000 V (10 ~ 9 990) MΩ
내전압 AC(500 ~ 5 000) V
염수 35 °C NaCl: 5 % / 40 ℃ / 93 % R.H. |
소재지-2 |
| KS X IEC 60945:2002 |
해상 항해, 무선통신 기기 및 시스템
-일반 요구사항 - 시험 방법과 요구되는 시험결과
8.2 건조고온
8.3 온습도
8.4 저온
8.7 진동
8.12 부식(염수분무) |
온도, 습도 (-30 ∼ 70) °C, 93 % R.H.
진동 (2 ∼ 100) Hz
염수 NaCl : 5 % 40 °C (90 ∼ 95) % R.H. |
소재지-2 |
| LR:2013 |
Performance and Environmental Test Specification for
the following Environmentally Tested Products used in
Marine Applications: Electrical Equipment Control and
Monitoring Equipment Instrumentation and Internal
Communication Equipment Programmable Electronic
Systems
(Scope)
Section 12 Vibration Test 1
Section 13 Vibration Test 2
Section 14 Humidity Test 1–Cyclic
Section 14 Humidity Test 2–Steady State
Section 17 Dry Heat Test
Section 18 Low Temperature Test
Section 19 High Voltage Test |
온도, 습도(-70 ~ 150) °C, 95 % R.H.
진동 (2 ~ 100) Hz, (7 ~ 40) m/s² |
소재지-2 |
| LR:2024 |
Performance and Environmental Test Specification for
the following Environmentally Tested Products used in
Marine Applications: Electrical Equipment Control and
Monitoring Equipment Instrumentation and Internal
Communication Equipment Programmable Electronic
Systems
(Scope)
Section 7 Insulation resistance Test
Section 12 Vibration Test 1
Section 13 Vibration Test 2
Section 14 Humidity Test 1–Cyclic
Section 14 Humidity Test 2–Steady State
Section 17 Dry Heat Test
Section 18 Low Temperature Test
Section 19 High Voltage Test |
온도, 습도(-70 ~ 150) °C, 95 % R.H.
진동 (2 ~ 100) Hz, (7 ~ 40) m/s²
절연저항 DC (48 ~ 500) V, (1 ~ 9 990) MΩ
내전압 AC (500 ~ 3 000) V |
소재지-2 |
| RTCA/DO-160G:2010 |
Environmental Conditions and Test Procedures for Airborne Equipment
(Scope)
Section 4.5 Temperature Tests
Section 6. Humidity
Section 7. Operational Shocks
Section 8. Vibration
Section 14 Salt Fog |
진동 (1 ~ 2 000) Hz 200 m/s²
온도 습도 (-55 ~ 85) °C (10 ~ 98) % R.H.
염수 35 °C NaCl : 5 % |
소재지-2 |
| KRS SG 0068 - 23 (R) |
승강장 안전문 설비
4.3.3 온도 시험
4.3.5 절연저항 및 내전압 시험
4.3.6 진동 및 충격 시험
4.3.7 방수 및 방진 시험 |
온도 (-40 ∼ 70) °C
습도 (45 ∼ 98) % R.H.
절연저항 DC 500 V (5 ~ 9 990) MΩ
내전압 AC (500 ~ 2 500） V
진동 (1 ~ 2 000) Hz (14.9 ~ 300) m/s²
충격 (50 ∼ 500) m/s²
Probe: (1 ~ 500) mm
Depression: Less than 2 kPa
Water flow rate: (0.56 ~ 100) L |
소재지-2 |
| IEC 60255-21-3:1993 |
Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection
equipment - Section 3: Seismic tests
[Exception]
5. Requirements for biaxial multi-frequency random
seismic test (method B) |
진동 (1 ∼ 35) Hz, (5 ~ 20) m/s² |
부속시설-1 |
| IEC 60255-21-2:1988 |
Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection
equipment - Section Two: Shock and bump tests |
충격 (50 ~ 300) m/s² , (11 ~ 16) ms |
부속시설-1 |
| IEC 60255-21-1:1988 |
Electrical relays - Part 21: Vibration, shock, bump
and seismic tests on measuring relays and protection
equipment - Section One: Vibration tests (sinusoidal) |
진동 (10 ∼ 150) Hz, (5 ~ 20) m/s² |
부속시설-1 |
| IEC 60068-2-64:2019 |
Environmental testing-Parts 2-64 : Tests-Test Fh : Vibration, broadband random and guidance |
진동 (1 ∼ 2 000) Hz (0.98 ∼ 300) m/s² |
부속시설-1 |
| IEC 60068-2-6:2007 |
Environmental testing -Part 2-6 : Tests-Test Fc : Vibration (sinusoidal) |
진동 (1 ∼ 2 000) Hz, (0.98 ∼ 490) m/s² |
부속시설-1 |
| IEC 60068-2-27:2008 |
Environmental testing-Parts 2-27 : Tests-Test Ea and guidance : Shock
[Exception]
4.1.1 Trapezoidal pulse |
충격 (50 ∼ 500) m/s² |
부속시설-1 |
| IEC 60068-2-2:2025 |
Environmental testing-Part 2-2 : Tests-Test B : Dry
heat
[Exception]
6.5.2 Temperature
(155 ~ 1 000) ℃ |
온도 (30 ~ 125) °C |
부속시설-1 |
| IEC 60068-2-14:2023 |
Environmental testing -Part 2-14: Tests –Test N: Change of temperature
7. Test Na: Rapidchange of temperature with prescribed time of transfer
8. Test Nb: Change of temperature with specified rate of change |
온도 (-65 ~ 125) °C |
부속시설-1 |
| IEC 60068-2-1:2025 |
Environmental testing-Part 2-1 : Tests-Test A : Cold |
온도 (-65 ∼ 5) °C |
부속시설-1 |
| KS C IEC 60068-2-6:2015 |
환경시험-제2-6부: 시험-시험 Fc:진동(정현파) |
진동 (0.1 ∼ 2 000) Hz, (0.98 ∼ 490) m/s² |
부속시설-1 |
| KS C IEC 60068-2-64:2019 |
환경 시험 - 제2-64부: 시험 - 시험 Fh: 광대역 불규칙 진동 시험 및 지침 |
진동 (1 ~ 2 000) Hz (14.9 ~ 300) m/s² |
부속시설-1 |
| KS C IEC 60255-21-1:1988 |
전기계전기 - 제21-1부: 보호 계전기와 보호 기기의
진동, 충격, 충돌, 지진 시험-진동 시험 용어 |
진동 (10 ∼ 150) Hz, (5 ~ 20) m/s² |
부속시설-1 |
| KS C IEC 60255-21-2:1988 |
전기계전기 - 제21-2부: 보호 계전기와 보호 기기의
진동, 충격, 충돌, 지진 시험-지진 시험 |
충격 (50 ~ 300) m/s² (11 ~ 16) ms |
부속시설-1 |
| KS C IEC 60255-21-3:1993 |
전기계전기 - 제21-3부: 보호 계전기와 보호 기기의
진동, 충격, 충돌, 지진 시험-지진시험
[제외항목]
5. 이축 다중-주파수 랜덤 지진 시험 |
진동 (1 ∼ 35) Hz (5 ~ 20) m/s² |
부속시설-1 |
| KS R 1034:2023 |
자동차 부품 진동 시험 방법 |
진동 (5 ∼ 2 000) Hz, (4.9 ∼ 490) m/s² |
부속시설-1 |
| KS R 9186:2021 |
철도 신호 보안 부품 - 진동 시험 방법 |
진동 (10 ∼ 1 000) Hz (8.92 ∼ 316) m/s² |
부속시설-1 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험 방법 |
진동 (1 ∼ 70) Hz, (4.9 ∼ 245) m/s² |
부속시설-1 |
| KS C IEC 61373:2010 |
철도적용 - 철도차량 장치 - 충격 및 진동 시험 |
진동 (2 ∼ 500) Hz (0.37 ∼ 144) m/s²
충격 (30 ∼ 300) m/s² |
부속시설-1 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기
12.2.12 진동, 충격 및 충돌시험 |
진동 (2 ~ 500) Hz (0.37 ~ 144) m/s²
충격 (30 ~ 300) m/s² |
부속시설-1 |
| IEC 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests |
진동 (2 ∼ 500) Hz (0.37 ~ 144) m/s²
충격 (30 ∼ 300) m/s² |
부속시설-1 |
| IEC 60571:2012 |
Railway applications - Electronic equipment used on rolling stock
12.2.12 Vibration, shock and bump test |
진동 (2 ~ 500) Hz (0.37 ~ 144) m/s²
충격 (30 ~ 300) m/s² |
부속시설-1 |
| EN 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests |
진동(2 ∼ 500) Hz (0.37 ∼ 144) m/s²
충격(30 ∼ 300) m/s² |
부속시설-1 |
| EN 50155:2021 |
Railway applications - Electronic equipment used on rolling stock
13.4.10 Shock and vibration test |
진동 (2 ∼ 500) Hz (0.37 ∼ 144) m/s²
충격 (30 ∼ 300) m/s² |
부속시설-1 |
| MIL-STD-810H:2022 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
514.8 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked -Loose Cargo
Category 6 -Truck/Trailer/Tracked -Large Assembly
Cargo
516.8 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.8 Gunfire Vibration Procedure III
528.1 Mechanical Vibrations of Shipboard Equipment
(Type 1 - Environmental Vibration) |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-810H:2019 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
514.8 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked -Loose Cargo
Category 6 -Truck/Trailer/Tracked -Large Assembly
Cargo
516.8 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.8 Gunfire Vibration Procedure III
528.1 Mechanical Vibrations of Shipboard Equipment
(Type 1 - Environmental Vibration) |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-810G:2014 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
514.7 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked -Loose Cargo
Category 6 -Truck/Trailer/Tracked -Large Assembly
Cargo
516.7 Shock
[Exception]
Procedure I-Functional
Shock(SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.7 Gunfire Vibration Procedure III
528.1 Mechanical Vibrations of Shipboard Equipment (Type 1 - Environmental Vibration) |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-810G:2008 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
514.6 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked - Loose Cargo
Category 6 -Truck/Trailer/Tracked - Large Assembly
Cargo
516.6 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.6 Gunfire Vibration Procedure III
528 Mechanical Vibrations of Shipboard Equipment (Type 1 – Environmental Vibration) |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-810F:2003 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
514.5 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked - Loose Cargo
Category 6 -Truck/Trailer/Tracked - Large Assembly Cargo
516.5Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.5 Gunfire Vibration Procedure Ⅳ |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-810F:2000 |
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
514.5 Vibration
[Exception]
Category 5 -Truck/Trailer/Tracked - Loose Cargo
Category 6 -Truck/Trailer/Tracked - Large Assembly Cargo
516.5 Shock
[Exception]
Procedure I-Functional
Shock (SRS)
Procedure Ⅶ - Rail Impact
Procedure Ⅷ - Catapult Launch/Arrested Landing
Procedure II, III-Trapezoidal pulse
519.5 Gunfire Vibration Procedure Ⅳ |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-810C:1975 |
Environmental Test Methods
514.2 Vibration
516.2 Shock
[Exception]
3.4 Procedure II, Transit drop
test
3.6 Procedure IV, High
Intensity Test
3.7 Procedure V, Bench
handling Test
3.8 Procedure VI, Rail impact
Test
3.9 Related Shock Test
519.2 Gunfire Vibration
Aircraft |
진동 (1 ~ 2 000) Hz (2 ~ 400) m/s²
충격 Max 400 m/s² |
부속시설-1 |
| MIL-STD-202G:2002 |
Test Method Standard Electronic and Electrical Component Parts
201A Vibration
204D Vibration, High Frequency
[Exception]
212A Acceleration
213B Shock (Specified Pulse)
214A Random Vibration |
진동(10 ~ 2 000) Hz
충격 (150 ~ 500) m/s² |
부속시설-1 |
| MIL-STD-167-1A:2005 |
Mechanical Vibrations of Shipboard Equipment (Type 1 - environmental) |
진동 (4 ∼ 33) Hz (0.01 ~ 0.03) inch z-p |
부속시설-1 |
| MIL-STD-167-1:1974 |
Mechanical Vibrations of Shipboard Equipment (Type 1 - environmental) |
진동 (4 ∼ 50) Hz (0.003 ~ 0.1) inch z-p |
부속시설-1 |
| MIL-PRF-28800F:1996 |
Test Equipment for Use with Electrical and Electronic Equipment, General Specification for (Scope)
4.5.5.3.1 Random Vibration Test
4.5.5.3.2 Sinusoidal Vibration Test
4.5.5.4.1 Functional Shock Test |
진동 (10 ~ 2 000) Hz 300 m/s² |
부속시설-1 |
| LR:2021 |
Performance and Environmental Test Specification for
the following Environmentally Tested Products used in
Marine Applications: Electrical Equipment Control and
Monitoring Equipment Instrumentation and Internal
Communication Equipment Programmable Electronic
Systems
(Scope)
Section 12 Vibration Test 1
Section 13 Vibration Test 2 |
진동 (2 ~ 100) Hz, (7 ~ 40) m/s² |
부속시설-1 |
| KS C IEC 60068-2-1:2007 |
환경 시험 - 제2-1부: 시험 - 시험 A: 내한성 시험 |
온도 (-65 ∼ 5) °C |
부속시설-1 |
| KS C IEC 60068-2-14:2023 |
환경시험 - 제2-14부: 시험-시험 N: 온도 변화
7시험 Na: 급격한 온도 변화
8시험 Nb: 규정된 변화율에 따른 온도 변화 |
온도 (-65 ∼ 125) °C |
부속시설-1 |
| KS C IEC 60068-2-2:2007 |
환경시험 - 제2-2부: 시험-시험 B: 내열성시험
[제외항목]
6.5.2 온도
(155 ~ 1 000) ℃ |
온도 (30 ~ 125) °C |
부속시설-1 |
| KS C IEC 60068-2-27:2008 |
환경시험-제2-27부:시험-시험 Ea와 지침: 충격 시험
[제외항목]
1. 가혹도 (2 000 ~100 000) m/s²
2. 표1 사다리꼴 파형 |
충격 (50 ∼ 500) m/s² |
부속시설-1 |
| DNV:2006 |
Environmental Test Specification For Instrumentation And Automation Equipment
3.6 Vibration test |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| DNV:2021 |
Environmental Test Specification For Instrumentation And Automation Equipment
6. Vibration tests |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| EN 60945:2002 |
Maritime navigation and radio communication equipment and systems. General requirements. Methods of testing and required test results
8.7 Vibration (all eqipment categories) |
진동 (2 ~ 100) Hz |
부속시설-1 |
| KS C IEC 60092-504:2001 |
선박용 전기설비-제504부 : 특별사항-제어 및 사용
5. 환경 형식 시험 변수
표 1 - 형식 시험, 시험 절차 및 시험 조건
10. 진동시험(사인파) |
진동 (2 ~ 2 000) Hz |
부속시설-1 |
| IEC 60092-504:2016 |
Electrical installation ships - Part 504: - Automation, control and instrumentation
5. Environmental type testing parameter
Table1-Type tests, test procedures and severities
10. Vibration(sinusoidal) |
진동 (2 ~ 2 000) Hz |
부속시설-1 |
| IEC 60945:2002 |
Maritime navigation and radio communication
equipment and systems - General requirements - Methods of testing and required test results
8.7 Vibration (all equipment categories) |
진동 (2 ~ 100) Hz |
부속시설-1 |
| KR:2020 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
8. 진동시험 |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| KR:2021 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
8. 진동시험 |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| KR:2022 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
8. 진동시험 |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| KR:2023 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
8. 진동시험 |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| KR:2024 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
8. 진동시험 |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| KR:2025 |
한국선급: 제조법 및 형식승인 등에 관한지침
3장 23절 표3.23.1
8. 진동시험 |
진동 (2 ~ 100) Hz (7 ~ 40) m/s² |
부속시설-1 |
| KS X IEC 60945:2002 |
해상 항해, 무선통신 기기 및 시스템
-일반 요구사항 - 시험 방법과 요구되는 시험결과
8.7 진동 |
진동 (2 ~ 100) Hz |
부속시설-1 |
| LR:2013 |
Performance and Environmental Test Specification for
the following Environmentally Tested Products used in
Marine Applications: Electrical Equipment Control and
Monitoring Equipment Instrumentation and Internal
Communication Equipment Programmable Electronic
Systems
(Scope)
Section 12 Vibration Test 1
Section 13 Vibration Test 2 |
진동 (2 ~ 100) Hz, (7 ~ 40) m/s² |
부속시설-1 |
| LR:2024 |
Performance and Environmental Test Specification for
the following Environmentally Tested Products used in
Marine Applications: Electrical Equipment Control and
Monitoring Equipment Instrumentation and Internal
Communication Equipment Programmable Electronic
Systems
(Scope)
Section 12 Vibration Test 1
Section 13 Vibration Test 2 |
진동 (2 ~ 100) Hz, (7 ~ 40) m/s² |
부속시설-1 |
| RTCA/DO-160G:2010 |
Environmental Conditions and Test Procedures for Airborne Equipment
(Scope)
Section 8. Vibration |
진동 (1 ~ 2 000) Hz 200 m/s² |
부속시설-1 |
| KRS SG 0068 - 23 (R) |
승강장 안전문 설비
4.3.3 온도 시험
4.3.5 절연저항 및 내전압 시험
4.3.6 진동 및 충격 시험
4.3.7 방수 및 방진 시험 |
진동 (1 ~ 2 000) Hz (14.9 ~ 300) m/s²
충격 (50 ∼ 500) m/s² |
부속시설-1 |
