한국인정기구-KOLAS

시험은 특정한 제품,공정 또는 서비스를 대상으로 하나 또는 그 이상의 특성을 규정된 절차에 따라 측정하는 기술적인 작업, 설계, 제품, 서비스, 공정, 공장에 대한 조사 및 특정요건이나 전문적 판정, 일반요건을 근거로 한 적합성 판정을 말한다.

인정번호 (Accreditation No)

KT1213

기관명
(Organization Name)

씨에스에이그룹코리아(유)

공인유효기간	2024-08-29 ~ 2028-08-28
주소	경기도 용인시 처인구 모현읍 오산로 155
소재지	경기도 용인시 처인구 모현읍 오산로 155
담당자	임흥택
전화 번호	02-6371-6000
팩스 번호	02-6371-6024
인정범위	전기시험

규격번호 (Test method)	규격명 (Standard designation)	시험범위 (Test Range)	사업장 (Site)
▶ 유/무선 통신기기
EN 300 328 V2.2.2	Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum	2 400 MHz ~ 2 483.5 MHz	소재지
EN 300 330 V2.1.1	Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU	9 kHz ~ 30 MHz	소재지
EN 300 440 V2.1.1	Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU	1 GHz ~ 40 GHz	소재지
EN 300 220-2 V3.1.1	Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment	25 MHz ~ 1 000 MHz	소재지
EN 300 220-3-1 V2.1.1	Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz)	25 MHz ~ 1 000 MHz	소재지
EN 301 893 V2.1.1	5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU	5 150 MHz ~ 5 350 MHz, 5 470 MHz ~ 5 725 MHz	소재지
EN 300 220-3-2 V1.1.1	Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz	25 MHz ~ 1 000 MHz	소재지
EN 300 220-4 V1.1.1	Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz	25 MHz ~ 1 000 MHz	소재지
EN 303 687 V1.1.1	6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum	5 925 MHz ~ 6 425 MHz	소재지
EN 62479 : 2010	Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)	10 MHz ~ 40 GHz	소재지
EN 62311 : 2020	Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)	0 Hz ~ 40 GHz	소재지
AS/NZS 4268:2017	Radio equipment and systems - Short range devices - Limits and methods of measurement	9 kHz ~ 40 GHz	소재지
▶ 전자기적합성
AS CISPR 11:2017 AMD 1:2020	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
CISPR 11:2015+AMD1:2016+AMD2:2019	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
EN 55011:2016	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
EN 55011:2016/A1:2017	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
EN 55011:2016/A11:2020	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
EN 55011:2016/A2:2021	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
AS CISPR 14.1:2018	Electromagnetic compatibility— Requirements for household appliances, electric tools and similar apparatus Part 1: Emission (CISPR 14-1:2016 (ED 6.0), MOD) (Exception) clause 7.3.7.2 Electric fence supply units	CE: 0.15 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 1 000 ㎒	소재지
AS/NZS CISPR 14.1:2021	Electromagnetic Compatibility - Requirements for household appliances, electrical tools and similar apparatus – Part 1: Emission (Exception) clause 7.3.7.2 Electric fence supply units	CE: 0.15 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
CISPR 14-1:2016	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission (Exception) Clause 4.3.3.5 Electric fence	CE: 0.009 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 1 000 ㎒	소재지
CISPR 14-1:2020	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission (Exception) Clause 4.3.3.5 Electric fence energisers Table 9 testing methods - FAR, TEM-Waveguide	CE: 0.009 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
EN 55014-1:2017	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (Exception) Annex A.8.2 Electric fence energizers	CE: 0.009 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
EN 55014-1:2017/A11:2020	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (Exception) Annex A.8.2 Electric fence energizers	CE: 0.009 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
EN IEC 55014-1:2021	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission (Exception) Clause 4.3.3.5 Electric fence energisers Table 9 testing methods - FAR, TEM-Waveguide	CE: 0.009 ㎒ ~ 30 ㎒ DP: 30 ㎒ ~ 300 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
CISPR 14-2:2015	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard (Exception) 5.5 Radio frequency electromagnetic fields, 80 ㎒ to 1000 ㎒(IEC 61000-4-22)	ESD: ±8 ㎸ RS: 3 V/m, (80 ~ 1 000) ㎒ EFT: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, (0.15 ~ 230) ㎒ V-DIP: (0 ~ 100) %	소재지
EN IEC 61000-6-4:2019	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards – Emission standard for industrial environments (Exception) Table 1 – 1.3 Enclosure Test facility: TEM Waveguide	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
IEC 61000-6-1:2016	Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments (Exception) Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21 Table 4 – Immunity requirements – Input and output AC power ports of IEC 61000-4-34	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒ 3 V/m, 1 400 ㎒ ~ 2 000 ㎒, 1 V/m, 2 000 ㎒ ~ 2 700 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
CISPR 11:2015+AMD1:2016	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
CISPR 11:2015	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
AS CISPR 11:2017	Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Exception) clause 7.6.7 Electric welding equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
EN 55032:2015	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
EN 55032:2015/AC:2016-07	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
EN 55032:2015/A1:2020	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
EN 55032:2015/A11:2020	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
CISPR 35:2016	Electromagnetic compatibility of multimedia equipment - Immunity requirements (Exception) 4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒ RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 1 A/m V-DIP: (0 ~ 100) %	소재지
EN 55035:2017	Electromagnetic compatibility of multimedia equipment - Immunity requirements (Exception) 4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒ RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MF: 1 A/m V-DIP: (0 ~ 100) %	소재지
EN 55035:2017/A11:2020	Electromagnetic compatibility of multimedia equipment - Immunity requirements (Exception) 4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒ RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MF: 1 A/m V-DIP: (0 ~ 100) %	소재지
AS/NZS 61000.6.3:2021	Electromagnetic compatibility (EMC) Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
IEC 61000-6-3:2020	Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments (Exception) Table 3 – Requirements for radiated emissions, enclosure port 3.2 TEM, 3.3 FAR	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 6 000 ㎒ F/H: ≤16 A	소재지
EN IEC 61000-6-3:2021	Electromagnetic compatibility (EMC) - Part 6-3: Generic standards – Emission standard for equipment in residential environments	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 6 000 ㎒ F/H: ≤16 A	소재지
AS 61000.6.4:2020	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments (Exception) Table 3 – Requirements for radiated emissions - enclosure port: TEM, FAR	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
IEC 61000-6-4:2018	Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments (Exception) Table 3 – Requirements for radiated emissions - enclosure port: TEM, FAR	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 6 000 ㎒	소재지
EN IEC 55014-2:2021	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard (Exception) 5.5 Radio frequency electromagnetic fields, 80 ㎒ to 1000 ㎒(IEC 61000-4-22)	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 230 ㎒ V-DIP: (0 ~ 100) %	소재지
EN 55014-2:2015	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒ EFT: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 230 ㎒ V-DIP: (0 ~ 100) %	소재지
CISPR 14-2:2020	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard (Exception) 5.5 Radio frequency electromagnetic fields, 80 ㎒ to 1000 ㎒(IEC 61000-4-22)	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 230 ㎒ V-DIP: (0 ~ 100) %	소재지
IEC 60601-1-2:2014 +AMD1:2020	Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests	CE: 0.15 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) % Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒	소재지
EN 60601-1-2:2007	Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests	CE: 9 k㎐ ~ 30 ㎒ RE: 9 k㎐ ~ 18 ㎓ F/H: ≤16 A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61000-6-2:2016	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards – Immunity standard for industrial environments (Exception) Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21	ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61000-6-2:2019	Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments	ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒, 3 V/m, 1 400 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-1:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H: ≤16 A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒, 3 V/m, 1 400 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-1:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-2-1:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-2-1:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-2-2:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-2-2:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-2-3:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-2-3:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-2-4:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-2-4:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-2-5:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-2-5:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61326-2-6:2020	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61000-6-1:2019	Electromagnetic compatibility (EMC) - Part 6-1 : Generic standards - Immunity standard for residential, commercial and light-industrial environments	ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒, 3 V/m, 1 400 ㎒ ~ 6 000 ㎒, EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 61326-2-6:2021	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H : ≤16A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒, EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-1-2:2007	Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests	CE: 9 k㎐ ~ 30 ㎒ RE: 9 k㎐ ~ 18 ㎓ F/H: ≤16 A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-1-2:2015	Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests	CE: 0.15 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-1-2:2015/A1:2021	Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests	CE: 0.15 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) % Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒	소재지
IEC 60601-2-2:2009+COR1:2014	Medical electrical equipment – Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-2:2017	Medical electrical equipment – Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-2:2009/A11:2011	Medical electrical equipment – Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 60601-2-2:2018	Medical electrical equipment – Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-4:2010	Medical electrical equipment – Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-4:2010+AMD1:2018	Medical electrical equipment – Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-4:2011	Medical electrical equipment – Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-4:2011/A1:2019	Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-5:2009	Medical electrical equipment – Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-5:2015	Medical electrical equipment – Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-10:2012+AMD1:2016	Medical electrical equipment – Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-10:2015	Medical electrical equipment – Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-1-2:2014	Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests	CE: 0.15 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
CISPR 32:2015 +AMD1:2019	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Measurement Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
CISPR 32:2015	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
EN 60601-2-63:2015/A2:2021	Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-63:2015/A1:2019	Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-63:2015	Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 80601-2-30:2018	Medical electrical equipment – Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸, AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 80601-2-30:2009+AMD1:2013	Medical electrical equipment – Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/Burst: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-27:2014	Medical electrical equipment – Part 2-27: Particular requirements for the safety, including essential performance of electrocardiographic monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-27:2011	Medical electrical equipment – Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-25:2015	Medical electrical equipment – Part 2-25: Particular requirements for the safety of electrocardiographs Section 6. Protection against hazards of ignition of flammable anaesthetic mixtures	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-25:2011	Medical electrical equipment – Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-24:2015	Medical electrical equipment – Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-24:2012	Medical electrical equipment – Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 60601-2-22:2020	Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-22:2019	Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 60601-2-21:2021	Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-21:2020	Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 60601-2-20:2020	Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-20:2020	Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 60601-2-19:2021	Medical electrical equipment – Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances - Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-19:2020	Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-18:2015	Medical electrical equipment – Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-28:2010	Medical electrical equipment – Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-28:2017	Medical electrical equipment – Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-49:2015	Medical electrical equipment – Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-49:2011	Medical electrical equipment – Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-47:2015	Medical electrical equipment – Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-47:2012	Medical electrical equipment – Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-44:2009/A2:2016	Medical electrical equipment – Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography 201.17 ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒, ISM bands: 6 V MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-44:2009/A1:2012	Medical electrical equipment – Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography 201.17 ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒, ISM bands: 6 V MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-44:2009	Medical electrical equipment – Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography 201.17 ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒, ISM bands: 6 V MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-44:2009+AMD1:2012+AMD2:2016	Medical electrical equipment – Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography 201.17 ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒, ISM bands: 6 V MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-65:2012	Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-65:2012+AMD1:2017	Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-65:2012+AMD1:2017+AMD2:2021	Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
AS/NZS CISPR 32:2015 AMD1:2020	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Measurement Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
AS/NZS CISPR 32:2015	Electromagnetic compatibility of multimedia equipment – Emission Requirements (Exception) 30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex I: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지
EN 60601-2-10:2015/A1:2016	Medical electrical equipment – Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-18:2009	Medical electrical equipment – Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-63:2012	Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-62:2015	Medical electrical equipment – Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-62:2013	Medical electrical equipment – Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-54:2009/A2:2019	Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸, AD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-54:2009/A1:2015	Medical electrical equipment – Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒, ISM bands: 6 V MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-54:2009	Medical electrical equipment – Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±15 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒, ISM bands: 6 V MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-54:2022	Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸, AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-52:2010/A1:2015	Medical electrical equipment – Part 2-52: Particular requirements for the basic safety and essential performance of medical beds 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-52:2010	Medical electrical equipment – Part 2-52: Particular requirements for the basic safety and essential performance of medical beds 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-52:2009+AMD1:2015	Amendment 1 - Medical electrical equipment – Part 2-52: Particular requirements for the basic safety and essential performance of medical beds 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 80601-2-49:2019	Medical electrical equipment – Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) % Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒	소재지
IEC 80601-2-49:2018	Medical electrical equipment – Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 80601-2-30:2019	Medical electrical equipment – Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic disturbances – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸, AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 80601-2-30:2010/A1:2015	Medical electrical equipment – Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 80601-2-30:2010	Medical electrical equipment – Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-63:2012+AMD1:2017	Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-63:2012+AMD1:2017 +AMD2:2021	Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) % Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒	소재지
EN 80601-2-60:2015	Medical electrical equipment – Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 62920:2017+AMD1:2021	Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: >16 A and ≤64 A ESD: CD ±4 ㎸ AD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒, 3 V/m, 1 400 ㎒ ~ 6 000 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) %	소재지
IEC 80601-2-78:2019+AMD1:2024	Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS Clause 202 Electromagnetic Disturbance - Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 80601-2-77:2019/AMD1:2023	Amendment 1 - Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS Clause 202 Electromagnetic Disturbance - Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 80601-2-60:2019	Medical electrical equipment – Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 80601-2-60:2012	Medical electrical equipment – Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-65:2013/A2:2021	Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-65:2013/A1:2020	Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-65:2013	Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility–Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-37:2008/A1:2015	Medical electrical equipment – Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202.6 Electromagnetic compatibility	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-37:2008	Medical electrical equipment – Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202.6 Electromagnetic compatibility	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61000-4-3:2020	Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test	10 V/m, 80 ㎒ ~ 6 000 ㎒	소재지
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010	Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test	10 V/m, 80 ㎒ ~ 6 000 ㎒	소재지
EN IEC 61204-3:2018	Low voltage switch mode power supplies – Part 3: Electromagnetic compatibility (EMC)	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒ 3 V/m, 1 400 ㎒ ~ 2 000 ㎒ 1 V/m, 2 000 ㎒ ~ 2 700 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61000-3-2:2014	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)	≤16 A	소재지
IEC 61000-3-2:2018	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)	≤16 A	소재지
IEC 61000-3-2:2018+A1:2020	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)	≤16 A	소재지
EN 61000-3-2:2014	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)	≤16 A	소재지
EN IEC 61000-3-2:2019	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)	≤16 A	소재지
EN IEC 61000-3-2:2019+A1:2021	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)	≤16 A	소재지
IEC 61000-3-3:2013+AMD1:2017	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection	≤16 A	소재지
EN 61000-3-3:2013	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection	≤16 A	소재지
EN 61000-3-3:2013/A1:2019	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection	≤16 A	소재지
EN 61000-3-3:2013/A2:2021	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection	≤16 A	소재지
EN 61000-3-3:2013/A2:2021/AC:2022-01	Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection	≤16 A	소재지
IEC 61000-3-11:2017	Electromagnetic compatibility (EMC) - Part 3-11 : Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection	>16 A and ≤64 A	소재지
EN IEC 61000-3-11:2019	Electromagnetic compatibility (EMC) - Part 3-11 : Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection	>16 A and ≤64 A	소재지
IEC 61000-3-12:2011+AMD1:2021	Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase	>16 A and ≤64 A	소재지
EN 61000-3-12:2011	Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase	>16 A and ≤64 A	소재지
IEC 61000-4-2:2008	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test	±(2 ~ 15) ㎸	소재지
EN 61000-4-2:2009	Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test	±(2 ~ 15) ㎸	소재지
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015	Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests	≤2 ㎑ at 50 ㎐, ≤2.4 ㎑ at 60 ㎐ ≤16 A	소재지
IEC EN 61000-4-11:2020/AC:2020-10	Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase	(0 ~ 100) %	소재지
IEC 60601-2-2:2017+AMD1:2023	Medical electrical equipment -Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories - 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS - 202 Electromagnetic Disturbances - Requirements and tests	CE: 0.15 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
ETSI EN 301 489-1 V2.2.3(2019-11)	ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility (Exception) vehicular equipment	CE: 150 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 6 ㎓ ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) % H/F : ≤64 A	소재지
ETSI EN 301 489-3 V2.3.2(2023-01)	ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility (Exception) vehicular equipment	CE: 150 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 6 ㎓ ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) % H/F : ≤64 A	소재지
ETSI EN 301 489-17 V3.3.1(2024-09)	ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility (Exception) vehicular equipment	CE: 150 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 6 ㎓ ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) % H/F : ≤64 A	소재지
EN 61000-4-3:2006/A2:2010	Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test	10 V/m, 80 ㎒ ~ 6 000 ㎒	소재지
EN 61000-4-13:2002	Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests	≤2 ㎑ at 50 ㎐, ≤2.4 ㎑ at 60 ㎐ ≤16 A	소재지
IEC 60601-2-34:2011	Medical electrical equipment – Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 60601-2-28:2019	Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-28:2010	Medical electrical equipment – Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
EN IEC 80601-2-60:2020	Medical electrical equipment – Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
IEC 61204-3:2016	Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)	CE: 0.15 ㎒ ~ 30 ㎒ RE, RFI: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒, 3 V/m, 1 400 ㎒ ~ 2 000 ㎒, 1 V/m, 2 000 ㎒ ~ 2 700 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 1 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) %	소재지
EN IEC 61000-4-3:2020	Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test	10 V/m, 80 ㎒ ~ 6 000 ㎒	소재지
IEC 61000-4-4:2012	Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test	±(0.5 ~ 4) ㎸	소재지
EN 61000-4-4:2012	Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test	±(0.5 ~ 4) ㎸	소재지
IEC 61000-4-5:2014	Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test	±(0.5 ~ 4) ㎸	소재지
IEC 61000-4-5:2014+AMD1:2017	Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test	±(0.5 ~ 4) ㎸	소재지
EN 61000-4-5:2014	Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test	±(0.5 ~ 4) ㎸	소재지
EN 61000-4-5:2014/A1:2017	Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test	±(0.5 ~ 4) ㎸	소재지
IEC 61000-4-6:2013	Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields	10 V, 0.15 ㎒ ~ 230 ㎒	소재지
EN 61000-4-6:2014	Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields	10 V, 0.15 ㎒ ~ 80 ㎒	소재지
EN 61000-4-6:2014/AC:2015	Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields	10 V, 0.15 ㎒ ~ 80 ㎒	소재지
IEC 61000-4-8:2009	Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test	(1 ~30) A/m	소재지
EN 61000-4-8:2010	Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test	(1 ~30) A/m	소재지
IEC 61000-4-11:2020	Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase	(0 ~ 100) %	소재지
EN IEC 61000-4-11:2020	Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase	(0 ~ 100) %	소재지
IEC EN 61000-4-11:2020/AC:2020-06	Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase	(0 ~ 100) %	소재지
EN 61000-4-13:2002/A2:2016	Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests	≤2 ㎑ at 50 ㎐, ≤2.4 ㎑ at 60 ㎐ ≤16 A	소재지
IEC 60601-1-11:2015	Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment - 12 Additional requirements for ELECTROMAGNETIC EMISSIONS of ME EQUIPMENT and ME SYSTEMS	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
IEC 60601-1-11:2015+AMD1:2020	Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment - 12 Additional requirements for ELECTROMAGNETIC EMISSIONS of ME EQUIPMENT and ME SYSTEMS	CE: 9 ㎑ ~ 30 ㎒ RE: 9 ㎑ ~ 18 ㎓	소재지
IEC 60601-2-6:2012+AMD1:2016+AMD2:2022	Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment - 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS - 202 Electromagnetic Disturbances - Requirements and tests	CE: 0.15 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: CD ±8 ㎸ AD: ±15 ㎸ RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 6 V, 0.15 ㎒ ~ 80 ㎒ MS: 30 A/m V-DIP: (0 ~ 100) %	소재지
EN 60601-2-34:2014	Medical electrical equipment – Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202 Electromagnetic compatibility – Requirements and tests	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC 60601-2-37:2007+AMD1:2015	Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS 202.6 Electromagnetic compatibility	CE: 0.15 ㎒ ~ 30 ㎒ RE: 30 ㎒ ~ 1 000 ㎒ F/H: ≤16 A ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒ EFT/B: ±2 ㎸ Surge: ±2 ㎸ CS: 10 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
IEC TS 60601-4-2:2024	Medical electrical equipment – Part 4-2: Guidance and interpretation – Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems (Exception) vehicles equipment	ESD: CD ±4 ㎸ AD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒ RS(Proximity fields): 3 V/m ~ 9 V/m, 385 ㎒~ 5 785 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ MS: 3 A/m V-DIP: (0 ~ 100) %	소재지
QCVN 18:2022/BTTTT	National technical requlation on Electromagnetic Compatibility for Radio Equipment	CE: 150 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 6 ㎓ ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) % H/F : ≤64 A	소재지
QCVN 96:2015/BTTTT	National technical regulation on Electromagnetic Compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz	CE: 150 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 6 ㎓ ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) % H/F : ≤64 A	소재지
QCVN 112:2017/BTTTT	National technical regulation on general Electromagnetic Compatibility for radio broadband data transmission equipment	CE: 150 ㎑ ~ 30 ㎒ RE: 30 ㎒ ~ 6 ㎓ ESD: ±8 ㎸ RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒ EFT/B: ±1 ㎸ Surge: ±2 ㎸ CS: 3 V, 0.15 ㎒ ~ 80 ㎒ V-DIP: (0 ~ 100) % H/F : ≤64 A	소재지
QCVN 118:2018/BTTTT	National technical regulation on general Electromagnetic Compatibility of multimedia equipment - Emission requirements (Exception) 30 ㎒~ 1 ㎓ FAR Test methods and associated limits for radiated emissions Annex H: Other test methods and associated limits for radiated emissions	CE: 0.15 ㎒ ~ 2 150 ㎒ RE: 30 ㎒ ~ 6 ㎓ ERP: 1 ㎓ ~ 18 ㎓	소재지

규격번호
(Test method)

규격명
(Standard designation)

시험범위
(Test Range)

사업장
(Site)

▶ 유/무선 통신기기

EN 300 328 V2.2.2

Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum

2 400 MHz ~ 2 483.5 MHz

소재지

EN 300 330 V2.1.1

Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

9 kHz ~ 30 MHz

소재지

EN 300 440 V2.1.1

Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

1 GHz ~ 40 GHz

소재지

EN 300 220-2 V3.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment

25 MHz ~ 1 000 MHz

소재지

EN 300 220-3-1 V2.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz)

25 MHz ~ 1 000 MHz

소재지

EN 301 893 V2.1.1

5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

5 150 MHz ~ 5 350 MHz, 5 470 MHz ~ 5 725 MHz

소재지

EN 300 220-3-2 V1.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz

25 MHz ~ 1 000 MHz

소재지

EN 300 220-4 V1.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz

25 MHz ~ 1 000 MHz

소재지

EN 303 687 V1.1.1

6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum

5 925 MHz ~ 6 425 MHz

소재지

EN 62479 : 2010

Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)

10 MHz ~ 40 GHz

소재지

EN 62311 : 2020

Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)

0 Hz ~ 40 GHz

소재지

AS/NZS 4268:2017

Radio equipment and systems - Short range devices - Limits and methods of measurement

9 kHz ~ 40 GHz

소재지

▶ 전자기적합성

AS CISPR 11:2017 AMD 1:2020

Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
clause 7.6.7 Electric welding equipment

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

CISPR 11:2015+AMD1:2016+AMD2:2019

Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
clause 7.6.7 Electric welding equipment

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

EN 55011:2016

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
clause 6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A
clause 6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
clause 7.6.7 Electric welding equipment

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

EN 55011:2016/A1:2017

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

EN 55011:2016/A11:2020

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

EN 55011:2016/A2:2021

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

AS CISPR 14.1:2018

Electromagnetic compatibility— Requirements for household appliances, electric tools and similar apparatus
Part 1: Emission (CISPR 14-1:2016 (ED 6.0), MOD)
(Exception)
clause 7.3.7.2 Electric fence supply units

CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒

소재지

AS/NZS CISPR 14.1:2021

Electromagnetic Compatibility - Requirements for household appliances, electrical tools and similar apparatus –
Part 1: Emission
(Exception)
clause 7.3.7.2 Electric fence supply units

CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

CISPR 14-1:2016

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -
Part 1 : Emission
(Exception)
Clause 4.3.3.5 Electric fence

CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒

소재지

CISPR 14-1:2020

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -
Part 1 : Emission
(Exception)
Clause 4.3.3.5 Electric fence energisers
Table 9 testing methods - FAR, TEM-Waveguide

CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

EN 55014-1:2017

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -
Part 1: Emission
(Exception)
Annex A.8.2 Electric fence energizers

CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

EN 55014-1:2017/A11:2020

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -
Part 1: Emission
(Exception)
Annex A.8.2 Electric fence energizers

CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

EN IEC 55014-1:2021

CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

CISPR 14-2:2015

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -
Part 2: Immunity - Product family standard
(Exception)
5.5 Radio frequency electromagnetic fields, 80 ㎒ to 1000 ㎒(IEC 61000-4-22)

ESD: ±8 ㎸
RS: 3 V/m, (80 ~ 1 000) ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, (0.15 ~ 230) ㎒
V-DIP: (0 ~ 100) %

소재지

EN IEC 61000-6-4:2019

Electromagnetic compatibility (EMC) -
Part 6-4: Generic standards – Emission standard for industrial environments
(Exception)
Table 1 – 1.3 Enclosure Test facility: TEM Waveguide

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

IEC 61000-6-1:2016

Electromagnetic compatibility (EMC) -
Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
(Exception)
Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21
Table 4 – Immunity requirements – Input and output AC power ports of IEC 61000-4-34

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

CISPR 11:2015+AMD1:2016

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

CISPR 11:2015

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

AS CISPR 11:2017

Industrial, scientific and medical equipment -
Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
clause 7.6.7 Electric welding equipment

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

EN 55032:2015

Electromagnetic compatibility of multimedia equipment – Emission Requirements
(Exception)
30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex I: Other test methods and associated limits for radiated emissions

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

EN 55032:2015/AC:2016-07

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

EN 55032:2015/A1:2020

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

EN 55032:2015/A11:2020

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

CISPR 35:2016

Electromagnetic compatibility of multimedia equipment - Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) %

소재지

EN 55035:2017

Electromagnetic compatibility of multimedia equipment - Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MF: 1 A/m
V-DIP: (0 ~ 100) %

소재지

EN 55035:2017/A11:2020

Electromagnetic compatibility of multimedia equipment - Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MF: 1 A/m
V-DIP: (0 ~ 100) %

소재지

AS/NZS 61000.6.3:2021

Electromagnetic compatibility (EMC)
Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

IEC 61000-6-3:2020

Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission standard for equipment in residential environments
(Exception)
Table 3 – Requirements for radiated emissions, enclosure port 3.2 TEM, 3.3 FAR

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤16 A

소재지

EN IEC 61000-6-3:2021

Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards – Emission standard for equipment in residential environments

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤16 A

소재지

AS 61000.6.4:2020

Electromagnetic compatibility (EMC) -
Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
Table 3 – Requirements for radiated emissions - enclosure port: TEM, FAR

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

IEC 61000-6-4:2018

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒

소재지

EN IEC 55014-2:2021

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 230 ㎒
V-DIP: (0 ~ 100) %

소재지

EN 55014-2:2015

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -
Part 2: Immunity - Product family standard

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 230 ㎒
V-DIP: (0 ~ 100) %

소재지

CISPR 14-2:2020

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 230 ㎒
V-DIP: (0 ~ 100) %

소재지

IEC 60601-1-2:2014 +AMD1:2020

Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests

CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒

소재지

EN 60601-1-2:2007

Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

CE: 9 k㎐ ~ 30 ㎒
RE: 9 k㎐ ~ 18 ㎓
F/H: ≤16 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61000-6-2:2016

Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards – Immunity standard for industrial environments
(Exception)
Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21

ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61000-6-2:2019

Electromagnetic compatibility (EMC) -
Part 6-2: Generic standards - Immunity standard for industrial environments

ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-1:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤16 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-1:2021

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 1: General requirements

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-2-1:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-2-1:2021

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-2-2:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-2-2:2021

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-2-3:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-2-3:2021

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-2-4:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-2-4:2021

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-2-5:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-5: Particular requirements
- Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-2-5:2021

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61326-2-6:2020

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61000-6-1:2019

Electromagnetic compatibility (EMC) -
Part 6-1 : Generic standards - Immunity standard for residential, commercial and light-industrial environments

ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 61326-2-6:2021

Electrical equipment for measurement, control and laboratory use - EMC requirements -
Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤16A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-1-2:2007

Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

CE: 9 k㎐ ~ 30 ㎒
RE: 9 k㎐ ~ 18 ㎓
F/H: ≤16 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-1-2:2015

Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests

소재지

EN 60601-1-2:2015/A1:2021

Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests

소재지

IEC 60601-2-2:2009+COR1:2014

Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-2:2017

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-2:2009/A11:2011

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 60601-2-2:2018

소재지

IEC 60601-2-4:2010

Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-4:2010+AMD1:2018

소재지

EN 60601-2-4:2011

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-4:2011/A1:2019

Medical electrical equipment -
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

소재지

IEC 60601-2-5:2009

Medical electrical equipment –
Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-5:2015

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-10:2012+AMD1:2016

Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-10:2015

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-1-2:2014

Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests

소재지

CISPR 32:2015 +AMD1:2019

Electromagnetic compatibility of multimedia equipment – Emission Requirements
(Exception)
30 ㎒ ~ 1 ㎓ FAR Measurement
Annex I: Other test methods and associated limits for radiated emissions

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

CISPR 32:2015

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

EN 60601-2-63:2015/A2:2021

Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

소재지

EN 60601-2-63:2015/A1:2019

소재지

EN 60601-2-63:2015

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 80601-2-30:2018

Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: CD ±8 ㎸,
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 80601-2-30:2009+AMD1:2013

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/Burst: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-27:2014

Medical electrical equipment –
Part 2-27: Particular requirements for the safety, including essential performance of electrocardiographic monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-27:2011

Medical electrical equipment –
Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-25:2015

Medical electrical equipment –
Part 2-25: Particular requirements for the safety of electrocardiographs Section 6. Protection against hazards of ignition of flammable anaesthetic mixtures

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-25:2011

Medical electrical equipment –
Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-24:2015

Medical electrical equipment –
Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-24:2012

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 60601-2-22:2020

Medical electrical equipment -
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

소재지

IEC 60601-2-22:2019

소재지

EN IEC 60601-2-21:2021

Medical electrical equipment -
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
202 Electromagnetic compatibility – Requirements and tests

소재지

IEC 60601-2-21:2020

Medical electrical equipment -
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances – Requirements and tests

소재지

EN IEC 60601-2-20:2020

Medical electrical equipment -
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances – Requirements and tests

소재지

IEC 60601-2-20:2020

소재지

EN IEC 60601-2-19:2021

Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances - Requirements and tests

소재지

IEC 60601-2-19:2020

Medical electrical equipment -
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances – Requirements and tests

소재지

EN 60601-2-18:2015

Medical electrical equipment –
Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-28:2010

Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-28:2017

소재지

EN 60601-2-49:2015

Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-49:2011

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-47:2015

Medical electrical equipment –
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-47:2012

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-44:2009/A2:2016

Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
201.17 ELECTROMAGNETIC COMPATIBILITY of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒,
ISM bands: 6 V
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-44:2009/A1:2012

소재지

EN 60601-2-44:2009

소재지

IEC 60601-2-44:2009+AMD1:2012+AMD2:2016

소재지

IEC 60601-2-65:2012

Medical electrical equipment -
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility–Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-65:2012+AMD1:2017

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-65:2012+AMD1:2017+AMD2:2021

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

AS/NZS CISPR 32:2015 AMD1:2020

Electromagnetic compatibility of multimedia equipment – Emission Requirements
(Exception)
30 ㎒ ~ 1 ㎓ FAR Measurement
Annex I: Other test methods and associated limits for radiated emissions

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

AS/NZS CISPR 32:2015

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

EN 60601-2-10:2015/A1:2016

소재지

IEC 60601-2-18:2009

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-63:2012

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-62:2015

Medical electrical equipment –
Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-62:2013

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-54:2009/A2:2019

Medical electrical equipment -
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: CD ±8 ㎸,
AD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-54:2009/A1:2015

Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

소재지

EN 60601-2-54:2009

소재지

IEC 60601-2-54:2022

Medical electrical equipment -
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic disturbances – Requirements and tests

소재지

EN 60601-2-52:2010/A1:2015

Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-52:2010

Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-52:2009+AMD1:2015

Amendment 1 - Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 80601-2-49:2019

소재지

IEC 80601-2-49:2018

소재지

EN IEC 80601-2-30:2019

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: CD ±8 ㎸,
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN 80601-2-30:2010/A1:2015

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 80601-2-30:2010

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-63:2012+AMD1:2017

소재지

IEC 60601-2-63:2012+AMD1:2017 +AMD2:2021

Medical electrical equipment -
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

소재지

EN 80601-2-60:2015

Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 62920:2017+AMD1:2021

Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: >16 A and ≤64 A
ESD: CD ±4 ㎸
AD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %

소재지

IEC 80601-2-78:2019+AMD1:2024

Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests

소재지

IEC 80601-2-77:2019/AMD1:2023

Amendment 1 - Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
Clause 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Clause 202 Electromagnetic Disturbance - Requirements and tests

소재지

IEC 80601-2-60:2019

소재지

IEC 80601-2-60:2012

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-65:2013/A2:2021

Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility–Requirements and tests

소재지

EN 60601-2-65:2013/A1:2020

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: CD ±8 ㎸
AD ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-65:2013

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-37:2008/A1:2015

Medical electrical equipment –
Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202.6 Electromagnetic compatibility

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN 60601-2-37:2008

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61000-4-3:2020

Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

10 V/m, 80 ㎒ ~ 6 000 ㎒

소재지

IEC 61000-4-3:2006+AMD1:2007+AMD2:2010

Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

10 V/m, 80 ㎒ ~ 6 000 ㎒

소재지

EN IEC 61204-3:2018

Low voltage switch mode power supplies –
Part 3: Electromagnetic compatibility (EMC)

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒
3 V/m, 1 400 ㎒ ~ 2 000 ㎒
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 61000-3-2:2014

Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

≤16 A

소재지

IEC 61000-3-2:2018

Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

≤16 A

소재지

IEC 61000-3-2:2018+A1:2020

Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

≤16 A

소재지

EN 61000-3-2:2014

Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

≤16 A

소재지

EN IEC 61000-3-2:2019

Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

≤16 A

소재지

EN IEC 61000-3-2:2019+A1:2021

Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)

≤16 A

소재지

IEC 61000-3-3:2013+AMD1:2017

Electromagnetic compatibility (EMC) -
Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

≤16 A

소재지

EN 61000-3-3:2013

≤16 A

소재지

EN 61000-3-3:2013/A1:2019

≤16 A

소재지

EN 61000-3-3:2013/A2:2021

≤16 A

소재지

EN 61000-3-3:2013/A2:2021/AC:2022-01

≤16 A

소재지

IEC 61000-3-11:2017

Electromagnetic compatibility (EMC) -
Part 3-11 : Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection

>16 A and ≤64 A

소재지

EN IEC 61000-3-11:2019

>16 A and ≤64 A

소재지

IEC 61000-3-12:2011+AMD1:2021

Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase

>16 A and ≤64 A

소재지

EN 61000-3-12:2011

Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase

>16 A and ≤64 A

소재지

IEC 61000-4-2:2008

Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

±(2 ~ 15) ㎸

소재지

EN 61000-4-2:2009

Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

±(2 ~ 15) ㎸

소재지

IEC 61000-4-13:2002+AMD1:2009+AMD2:2015

Electromagnetic compatibility (EMC) -
Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

≤2 ㎑ at 50 ㎐,
≤2.4 ㎑ at 60 ㎐
≤16 A

소재지

IEC EN 61000-4-11:2020/AC:2020-10

Electromagnetic compatibility (EMC) -
Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

(0 ~ 100) %

소재지

IEC 60601-2-2:2017+AMD1:2023

Medical electrical equipment -Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
- 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
- 202 Electromagnetic Disturbances - Requirements and tests

소재지

ETSI EN 301 489-1 V2.2.3(2019-11)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility
(Exception) vehicular equipment

CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
H/F : ≤64 A

소재지

ETSI EN 301 489-3 V2.3.2(2023-01)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility
(Exception) vehicular equipment

CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
H/F : ≤64 A

소재지

ETSI EN 301 489-17 V3.3.1(2024-09)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility
(Exception) vehicular equipment

CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
H/F : ≤64 A

소재지

EN 61000-4-3:2006/A2:2010

Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

10 V/m, 80 ㎒ ~ 6 000 ㎒

소재지

EN 61000-4-13:2002

Electromagnetic compatibility (EMC) -
Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

≤2 ㎑ at 50 ㎐,
≤2.4 ㎑ at 60 ㎐
≤16 A

소재지

IEC 60601-2-34:2011

Medical electrical equipment –
Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 60601-2-28:2019

Medical electrical equipment -
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS

소재지

EN 60601-2-28:2010

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

EN IEC 80601-2-60:2020

소재지

IEC 61204-3:2016

Low-voltage switch mode power supplies -
Part 3: Electromagnetic compatibility (EMC)

CE: 0.15 ㎒ ~ 30 ㎒
RE, RFI: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 1 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %

소재지

EN IEC 61000-4-3:2020

Electromagnetic compatibility (EMC) -
Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

10 V/m, 80 ㎒ ~ 6 000 ㎒

소재지

IEC 61000-4-4:2012

Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

±(0.5 ~ 4) ㎸

소재지

EN 61000-4-4:2012

Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

±(0.5 ~ 4) ㎸

소재지

IEC 61000-4-5:2014

Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test

±(0.5 ~ 4) ㎸

소재지

IEC 61000-4-5:2014+AMD1:2017

Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test

±(0.5 ~ 4) ㎸

소재지

EN 61000-4-5:2014

Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test

±(0.5 ~ 4) ㎸

소재지

EN 61000-4-5:2014/A1:2017

Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test

±(0.5 ~ 4) ㎸

소재지

IEC 61000-4-6:2013

Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

10 V, 0.15 ㎒ ~ 230 ㎒

소재지

EN 61000-4-6:2014

Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

10 V, 0.15 ㎒ ~ 80 ㎒

소재지

EN 61000-4-6:2014/AC:2015

Electromagnetic compatibility (EMC) -
Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

10 V, 0.15 ㎒ ~ 80 ㎒

소재지

IEC 61000-4-8:2009

Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

(1 ~30) A/m

소재지

EN 61000-4-8:2010

Electromagnetic compatibility (EMC) -
Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

(1 ~30) A/m

소재지

IEC 61000-4-11:2020

(0 ~ 100) %

소재지

EN IEC 61000-4-11:2020

(0 ~ 100) %

소재지

IEC EN 61000-4-11:2020/AC:2020-06

(0 ~ 100) %

소재지

EN 61000-4-13:2002/A2:2016

Electromagnetic compatibility (EMC) -
Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests

≤2 ㎑ at 50 ㎐,
≤2.4 ㎑ at 60 ㎐
≤16 A

소재지

IEC 60601-1-11:2015

Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
- 12 Additional requirements for ELECTROMAGNETIC EMISSIONS of ME EQUIPMENT and
ME SYSTEMS

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

IEC 60601-1-11:2015+AMD1:2020

CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓

소재지

IEC 60601-2-6:2012+AMD1:2016+AMD2:2022

Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment
- 201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
- 202 Electromagnetic Disturbances - Requirements and tests

소재지

EN 60601-2-34:2014

Medical electrical equipment –
Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202 Electromagnetic compatibility – Requirements and tests

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC 60601-2-37:2007+AMD1:2015

Medical electrical equipment -
Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
202.6 Electromagnetic compatibility

CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤16 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

IEC TS 60601-4-2:2024

Medical electrical equipment – Part 4-2: Guidance and interpretation – Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems
(Exception) vehicles equipment

ESD: CD ±4 ㎸
AD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 3 V/m ~ 9 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) %

소재지

QCVN 18:2022/BTTTT

National technical requlation on Electromagnetic Compatibility for Radio Equipment

CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
H/F : ≤64 A

소재지

QCVN 96:2015/BTTTT

National technical regulation on Electromagnetic Compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz

CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
H/F : ≤64 A

소재지

QCVN 112:2017/BTTTT

National technical regulation on general Electromagnetic Compatibility for radio broadband data transmission equipment

CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
H/F : ≤64 A

소재지

QCVN 118:2018/BTTTT

National technical regulation on general Electromagnetic Compatibility of multimedia equipment - Emission requirements

(Exception)
30 ㎒~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex H: Other test methods and associated limits for radiated emissions

CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓

소재지

공인기관검색Search Service

시험기관검색KOLAS Search Service

배너마당