| ▶ 전선, 케이블, 전로용품 |
| IEEE Std 48-2020 |
IEEE Standard for Test Procedures and Requirements for Alternating-Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
8.4.2.1 Partial discharge test
8.4.2.2 AC voltage 1 min dry withstand test
8.4.2.5 DC voltage 15 min dry withstand test
8.4.2.6 Lightning impulse voltage withstand test
8.4.2.7 AC voltage 5 h or 6 h dry withstand test
8.4.2.8 AC voltage 5 min or 15 min dry withstand test
8.4.3 Cyclic aging test |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Temperature: (-50 ~ 150) ℃ |
소재지 |
| IEEE Std 386-2016 |
IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV
7.4 Partial discharge test
7.5.1 AC withstand voltage test
7.5.3 Impulse withstand voltage test (BIL)
7.9 Current-cycling test for uninsulated components of 600-A and 900-A connectors
7.10.2.2 Current-cycling test
7.11 Current-cycling test for 600-A and 900-A insulated connectors
7.12 Accelerated sealing life test |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Temperature: (-50 ~ 150) ℃ |
소재지 |
| IEEE Std 404-2022 |
IEEE Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV
7.3.1 Partial discharge voltage level test
7.4.1 AC voltage
7.4.2 DC voltage
7.4.3 Basic Insulation Level (BIL)
7.6 Cyclic aging test for extruded dielectric and transition joints |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Temperature: (-50 ~ 150) ℃ |
소재지 |
| IEC 62217:2025 |
Polymeric HV insulators for indoor and outdoor use – General definitions, test methods and acceptance criteria
9.2.4 Reference flashover voltage test
9.2.7.4 Dry power frequency voltage tests |
AC voltage : Max 120 kV
DC voltage : Max 150 kV |
소재지 |
| KS C IEC 62217:2012 |
옥내 및 옥외용 폴리머 고압 애자 – 일반 정의, 시험방법 및 허용 기준
9.2.4 기준 상용주파 건조 전압 시험
9.2.7.4 상용주파 건조 내전압 |
AC voltage : Max 120 kV
DC voltage : Max 150 kV |
소재지 |
| ES-5935-0009:2026 |
23kV 케이블 종단접속재 및 직선 접속재
7.1.1 종단접속재
- 부분방전시험
- 상용주파 건조내전압시험 (1분)
- 상용주파 건조 내전압시험 (6시간)
- 직류건조내전압시험 (15분)
- 충격내전압시험 (130 ℃)
- Cyclic aging 시험
7.1.2 직선접속재
- 부분방전시험
- 상용주파 건조내전압시험 (1분)
- 직류건조내전압시험 (15분)
- 충격내전압시험(상온)
- 충격내전압시험(130 ℃)
- Cyclic aging 시험
- 장시간 상용주파내전압시험 |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Temperature: (-50 ~ 150) ℃
Chamber: (-40 ~ 150) ℃ |
소재지 |
| ES-5935-0012:2026 |
알루미늄 케이블 종단접속재 및 직선접속재
7.1.1 종단접속재
- 부분방전시험
- 상용주파 건조내전압시험 (1분)
- 상용주파 건조 내전압시험 (6시간)
- 직류건조내전압시험 (15분)
- 충격내전압시험 (130 ℃)
- Cyclic aging 시험
7.1.2 직선접속재
- 부분방전시험
- 상용주파 건조내전압시험 (1분)
- 직류건조내전압시험 (15분)
- 충격내전압시험(상온)
- 충격내전압시험(130 ℃)
- Cyclic aging 시험
- 장시간 상용주파내전압시험 |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Temperature: (-50 ~ 150) ℃
Chamber: (-40 ~ 150) ℃ |
소재지 |
| ES-5920-0011:2026 |
25.8kV 폴리머 컷아우트 스위치
7.1.2 상용주파 내전압시험(건조)
7.1.4 충격내전압시험
7.1.7 온도상승시험
7.1.8 무전압개폐시험 |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
LI: Max. 200 kV 10 kJ
Temperature: (-50 ~ 150) ℃ |
소재지 |
| IEC 62271-1:2017 + AMD1:2021 CSV |
High-voltage switchgear and controlgear – Part 1: Common specifications for alternating current switchgear and controlgear
7.2.7.2 Power-frequency voltage tests
7.2.7.3 Lightning impulse voltage tests
7.2.10 Partial discharge tests
7.4 Resistance measurement
7.5 Continuous current tests |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature: (-50 ~ 150) ℃ |
소재지 |
| IEC 62271-103:2021 |
High-voltage switchgear and controlgear – Part 103: Alternating current switches for rated voltages above 1 kV up to and including 52 kV
7.2 Dielectric tests
7.4 Resistance measurement
7.5 Continuous current tests
7.10.5 Dielectric tests
7.102.2 Mechanical operation test at ambient air temperature |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature : (-50 ~ 150) ℃ |
소재지 |
| IEC 62271-111:2019 |
High-voltage switchgear and controlgear – Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
7.2.7.2 Power-frequency voltage test
7.2.7.3 Lightning impulse voltage tests
7.2.7.101 DC withstand test voltage
7.4 Resistance measurement
7.5 Continuous current tests
7.106 Partial discharge (corona) tests
7.109 Mechanical duty test |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature : (-50 ~ 150) ℃ |
소재지 |
| KS C IEC 62271-1:2021 |
고압 개폐장치 및 제어장치 – 제1부: 교류 개폐장치 및 제어장치의 공통 시방서
7.2.7.2 상용 주파수 전압 시험
7.2.7.3 뇌 충격 전압 시험
7.2.10 부분 방전 시험
7.4 저항 측정
7.5 연속 전류 시험 |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature : (-50 ~ 150) ℃ |
소재지 |
| KS C IEC 62271-103:2021 |
고압 개폐 장치 및 제어 장치 – 제103부: 정격 전압 1 kV 초과 52 kV 이하의 교류 개폐기
7.2 절연 시험
7.4 저항 측정
7.5 연속 전류 시험
7.10.5 절연 시험
7.102.2 주위 온도에서의 기계적 동작 시험 |
AC voltage : Max 120 kV
AC current : (306 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature : (-50 ~ 150) ℃ |
소재지 |
| GS-5925-0011:2026 |
25.8kV 에폭시 지상개폐기
7.2.1 구조 및 외관검사
7.2.2 주회로 저항측정
7.2.6 절연내력시험
7.2.7 온도 안정화시험
7.2.8 무전압 개폐시험
7.2.9 절연저항측정
7.2.10 직류 내전압 시험
7.2.11 연속전류(온도상승)시험
7.2.12 부분방전시험
7.2.14 본체 밀봉시험
7.2.15 상연결접속재 시험
7.2.15.5 가속기밀시험
7.2.16 과전압 수명시험
7.2.17 제어함 구조 및 외관시험
7.2.18 제어회로 절연 및 전자파적합성 시험
7.2.18.1 상용주파내전압시험
7.2.19 내환경시험
7.2.20 제어기능 확인시험
7.2.21 시스템연결동작시험
7.2.22 전압계측 정밀도 시험
7.2.23 전류계측 정밀도 시험
7.2.30 제어장치 진동시험
7.2.31 제어장치 충격시험 |
AC voltage : Max 120 kV
AC current : (1 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature : (-50 ~ 150) ℃
Chamber: (-40 ~ 150) ℃
Humidity (20 ~ 98) % R.H.
Frequency (10 ~ 150) Hz
Acceleration (0.98 ~ 20) ㎨
Acceleration (50 ~ 300) ㎨ |
소재지 |
| GS-5925-0012:2026 |
25.8kV 에폭시 다회로 차단기
7.2.5 온도 안정화시험
7.2.6 무전압 개폐시험
7.2.7 절연저항측정
7.2.8 절연내력 시험
7.2.9 직류 내전압 시험
7.2.10 부분방전시험
7.2.11 연속전류(온도상승)시험
7.2.12 주회로 저항측정
7.2.15 본체 밀봉시험
7.2.16 상연결접속재 시험
7.2.16.5 가속기밀시험
7.2.17 과전압 수명시험
7.2.21 제어회로 절연 및 전자기적합성 시험
7.2.21.1 상용주파내전압시험
7.2.23 전압계측 정밀도 시험
7.2.24 전류계측 정밀도 시험
7.2.25 제어회로 내환경시험
7.2.27 제어장치 진동시험
7.2.28 제어장치 충격시험 |
AC voltage : Max 120 kV
AC current : (1 ~ 2 818) A
DC voltage : Max 150 kV
DC current : (20 ~ 100) A
LI: Max. 200 kV 10 kJ
PD: (5 ~ 50) pC
Resistance : 25 µΩ ~ 1 mΩ
Insulation Resistance : 10 MΩ ~ 1 000 GΩ
Temperature : (-50 ~ 150) ℃
Chamber: (-40 ~ 150) ℃
Humidity (20 ~ 98) % R.H. |
소재지 |
| ▶ 소프트웨어 |
| SEI CERT C++ Coding Standard (2016 Edition) |
Rules for Developing Safe, Reliable, and Secure Systems in C++ |
C++ language |
소재지 |
| ISO 26262-9:2018 |
Road vehicles - Functional safety - Part 9:
Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses |
ASIL A ~ D |
소재지 |
| ISO 26262-8:2018 |
Road vehicles - Functional safety - Part 8:
Supporting processes |
ASIL A ~ D |
소재지 |
| ISO 26262-7:2018 |
Road vehicles - Functional safety - Part 7:
Production, operation, service and decommissioning |
ASIL A ~ D |
소재지 |
| ISO 26262-5:2018 |
Road vehicles - Functional safety - Part 5:
Product development at the hardware level |
ASIL A ~ D |
소재지 |
| ISO 26262-4:2018 |
Road vehicles - Functional safety - Part 4:
Product development at the system level |
ASIL A ~ D |
소재지 |
| ISO 26262-3:2018 |
Road vehicles - Functional safety - Part 3: Concept phase |
ASIL A ~ D |
소재지 |
| ISO 26262-2:2018 |
Road vehicles - Functional safety - Part 2: Management of functional safety |
ASIL A ~ D |
소재지 |
| IEC 61508-2:2010 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety related systems |
SIL 1 ~ 4 |
소재지 |
| IEC 61508-1:2010 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
SIL 1 ~ 4 |
소재지 |
| IEC 61508-3:2010 |
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: software requirements |
SIL 1 ~ 4 |
소재지 |
| ISO 26262-6:2018 |
Road vehicles - Functional safety - Part 6: Product development at the software level |
ASIL A ~ D |
소재지 |
| MISRA C:2012 |
Guidelines for the use of the C language in critical systems |
C language |
소재지 |
| MISRA-C:2004 |
Guidelines for the use of the C language in critical systems |
C language |
소재지 |
| ISO/IEC 25023:2016 |
Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality |
- |
소재지 |
| ISO/IEC 25051:2014 |
Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
5.1 Requirements for product description
5.2 Requirements for user documentation
5.3 Quality requirements for software |
- |
소재지 |
| ISO/SAE 21434:2021 |
Road vehicles – Cybersecurity engineering |
CAL 1 ~ 4 |
소재지 |
| CWE Version 4.14 |
Common Weakness Enumeration (CWE)
CWE 658 Weaknesses in Software Written in C
CWE 659 Weaknesses in Software Written in C++ |
C language
C++ language |
소재지 |
| SEI CERT C Coding Standard (2016 Edition) |
Rules for Developing Safe, Reliable, and Secure Systems |
C language |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-64:2019 |
환경 시험 - 제2-64부: 시험 - 시험 Fh: 광대역 불규칙 진동 시험 및 지침 |
(1 ~ 2 000) Hz,
(0.98 ~ 300) ㎨ |
소재지 |
| KS C IEC 60068-2-57:2013 |
환경시험 2-57부: 시험-시험 Ff:진동-시간 이력과 사인비트 방법 |
(1 ~ 100) Hz,
(0.98 ~ 500) ㎨ |
소재지 |
| MIL-STD-202G w/Change 2:2013 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS
101E SALT ATMOSPHERE
103B HUMIDITY
106G MOISTURE RESISTANCE,
107G THERMAL SHOCK
108A LIFE
201A VIBRATION
204D VIBRATION, HIGH FREQUENCY
212A ACCELERATION
213B SHOCK
214A RANDOM VIBRATION |
SALT : 35 ℃, NaCl (5 ± 1) %
HUMIDITY : (23~ 40)℃,
MOISTURE RESISTANCE: (-10 ~ 65) ℃,
(50 ~ 95) % R.H.
THERMAL SHOCK : Min -65 ℃, Max 150 ℃
LIFE : Max 71 ℃
Vibration Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 500) ㎨
Vibration , High Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨
Acceleration:(0.98 ~ 500) ㎨
Shock Acceleration:(0.98 ~ 980) ㎨
Random Vibration Frequency:(1 ~ 2000) Hz
Acceleration:(0.98 ~ 980) ㎨ |
소재지 |
| MIL-STD-202G:2002 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS
101E SALT ATMOSPHERE
103B HUMIDITY
106G MOISTURE RESISTANCE,
107G THERMAL SHOCK
108A LIFE
201A VIBRATION
204D VIBRATION, HIGH FREQUENCY
212A ACCELERATION
213B SHOCK
214A RANDOM VIBRATION |
SALT : 35 ℃, NaCl (5 ± 1) %
HUMIDITY : (23~ 40)℃,
MOISTURE RESISTANCE: (-10 ~ 65) ℃,
(50 ~ 95) % R.H.
THERMAL SHOCK : Min -65 ℃, Max 150 ℃
LIFE : Max 71 ℃
Vibration Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 500) ㎨
Vibration , High Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨
Acceleration:(0.98 ~ 500) ㎨
Shock Acceleration:(0.98 ~ 980) ㎨
Random Vibration Frequency:(1 ~ 2000) Hz
Acceleration:(0.98 ~ 980) ㎨ |
소재지 |
| MIL-STD-167-1A:2005 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD
MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE II - INTERNALLY EXCITED) |
(4 ~ 100) Hz,
(0.48 ~ 300) ㎨ |
소재지 |
| MIL-STD-167-1:1974 |
DEPARTMENT OF DEFENSE TEST METHOD
MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE II - INTERNALLY EXCITED) |
Vibration Frequency : (4 ~ 100) Hz
Acceleration : (0.48 ~ 300) ㎨ |
소재지 |
| MIL-HDBK-217F:NOTICE 2 (1995) |
RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT
Section 5 : Micro Circuits Introduction
Section 6 : Discrete Semiconductors
Section 9 : Resistors
Section 10 : Capacitors
Section 11 : Inductive Devices
Section 12 : Rotating Devices
Section 13 : Relays
Section 15 : Connectors |
전압 (0 ~ 5) kV
전류 (0 ~ 15) A
주파수 대역폭 1 GHz
샘플 속도 5 GS/s
온도 (-200 ~ 400) ℃
열화상 온도 (0 ~ 500) ℃ |
소재지 |
| RTCA DO-160G:2010 |
Environmental Conditions and Test Procedures for Airborne Equipment
Section 4 Temperature and Altitude
(Exception)
4.6.3 Overpressure Test
Section 5 Temperature Variation
Section 6 Humidity
Section 7 Operational Shocks and Crash Safety
Section 8 Vibration
Section 10 Waterproofness
Section 12 Sand and Dust
Section 14 Salt Fog |
Altitude : (0 ~ 70 000) ft
High Temperature : (25 ~ 85) ℃
Low Temperature : (-55 ~ 25) ℃
Humidity : (38 ~ 65) ℃, (85 ~ 95) % R.H.
Operational Shocks and Crash Safety Shock : (0.98 ~ 500) ㎨
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Waterproofness : Max 280 L/㎡/h
Sand and Dust : Air Velocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Salt Fog : 35 ℃, NaCl (5 ± 1) % |
소재지 |
| RTCA DO-160F:2007 |
Environmental Conditions and Test Procedures for Airborne Equipment
Section 4 Temperature and Altitude
(Exception)
4.6.3 Overpressure Test
Section 5 Temperature Variation
Section 6 Humidity
Section 7 Operational Shocks and Crash Safety
Section 8 Vibration
Section 10 Waterproofness
Section 12 Sand and Dust
Section 14 Salt Fog |
Altitude : (0 ~ 70 000) ft
High Temperature : (25 ~ 85) ℃
Low Temperature : (-55 ~ 25) ℃
Humidity : (38 ~ 65) ℃, (85 ~ 95) % R.H.
Operational Shocks and Crash Safety Shock : (0.98 ~ 500) ㎨
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Waterproofness : Max 280 L/㎡/h
Sand and Dust : Air Velocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Salt Fog : 35 ℃, NaCl (5 ± 1) % |
소재지 |
| KS R 9186:2021 |
철도 신호 보안 부품-진동 시험방법 |
(10 ~ 1 000) Hz
(4.9 ~ 981) ㎨ |
소재지 |
| KS R 9187:2021 |
철도신호 보안부품-충격시험 방법
1종, 2종, 3종, 4종 |
충격가속도 : (98.1 ~ 1 180) ㎨ |
소재지 |
| KS R 9193:2022 |
철도신호 보안부품의 절연저항 및 내전압 시험방법 |
DC 500 V
(0.01 ~ 9 999) MΩ,
(1 ~ 5) ㎸ |
소재지 |
| KS T ISO 2247:2000 |
포장 - 수송포장과 단위화물 - 저주파 진동 시험 |
(2 ~ 7.3) Hz
(0.784 ~ 12.74) ㎨ |
소재지 |
| KS T ISO 8318:2000 |
포장-수송포장과 단위화물-가변 주파수에 의한 정현파 진동 시험 |
(3 ~ 100) Hz
(0.98 ~ 100) ㎨ |
소재지 |
| JESD22-A103E.01:2021 |
High Temperature Storage Life |
(125 ~ 200) ℃ |
소재지 |
| BUREAU VERITAS RULES FOR THE CLASSIFICATION OF STEEL SHIPS NR 467 C DT R21:2026 |
PART C MACHINERY, ELECTRICITY, AUTOMATION AND FIRE PROTECTION Ch 3 - Automation, Section 6 Testing Table 1
5. Dry Heat Test
6. Damp Heat Test
7. vibration
9. Insulation Resistance
10. High Voltage
11. Cold Test |
Dry Heat Test : (25 ~ 70) ℃
Damp Heat Test : (25 ~ 55) ℃, (60 ~ 98) % R.H.
Vibration Frequency:(2 ~ 100) Hz,
Acceleration:(7 ~ 40) ㎨
Insulation Resistance :DC (48 ~ 500) V
(0.01 ~ 9 990) MΩ
High Voltage :AC (500 ~ 2 500) V
Cold Test : (-25 ~ 25) ℃ |
소재지 |
| MIL-STD-810G:2008 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500.5 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.5 High Temperature
502.5 Low Temperature
503.5 Temperature shock
505.5 Solar Radiation (Sunshine)
506.5 Rain (Procedure III - Drip)
507.5 Humidity
509.5 Salt Fog
510.5 Sand and Dust
513.6 Acceleration
514.6 Vibration
516.6 Shock
519.6 Gunfire vibration Procedure Ⅰ, Ⅱ
520.3 Temperature, Humidity, Vibration and Altitude
528 Mechanical Vibrations of Shipboard Equipment (Type I - Environmental vibration) |
Low Pressure(Altitude) : (0 ~ 100 000) ft
High Temperature : (15 ~ 180) ℃
Low Temperature : (-70 ~ 35) ℃
Temperature Shock : (-70 ~ 180) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain : (140 ~ 280) L/㎡/h
Humidity : (23 ~ 60) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl (5 ± 1) %
Sand and Dust: Air Velocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration : (0.98 ~ 500) ㎨
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Shock Acceleration : (0.98 ~ 980) ㎨
Height : (100 ~ 1 800) mm
Gunfire Vibration ProcedureⅠ,Ⅱ Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Temperature, Humidity,
Vibration : (-70 ~ 150) ℃, (20 ~ 95) % R.H.
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨,
Altitude (0 ~ 100 000) ft
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental Vibration)
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 500) ㎨ |
소재지 |
| MIL-STD-810G w/Change 1:2014 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500.6 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.6 High Temperature
502.6 Low Temperature
503.6 Temperature shock
505.6 Solar Radiation (Sunshine)
506.6 Rain (Procedure III - Drip)
507.6 Humidity
509.6 Salt Fog
510.6 Sand and Dust
513.7 Acceleration
514.7 Vibration
516.7 Shock
519.7 Gunfire vibration Procedure Ⅰ, Ⅱ
520.4 Temperature, Humidity, Vibration and Altitude
528.1 Mechanical Vibrations of Shipboard Equipment (Type I - Environmental vibration) |
Low Pressure(Altitude) : (0 ~ 100 000) ft
High Temperature : (15 ~ 180) ℃
Low Temperature : (-70 ~ 35) ℃
Temp. Shock : (-70 ~ 180) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain : (140 ~ 280) L/㎡/h
Humidity : (23 ~60) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl (5 ± 1) %
Sand and Dust: Air Velocity (0 ~ 29) ㎧, Sand Concentration (0.18 ~ 2.2) g/㎥, Dust Concentration (3.6 ~ 17.6) g/㎥
Acceleration : (0.98 ~ 500) ㎨
Vibration Frequency: (1 ~ 2 000) Hz, Acceleration: (0.98 ~ 980) ㎨
Shock Acceleration: (0.98 ~ 980) ㎨ Height: (100 ~ 1 800) mm
Gunfire Vibration Procedure Ⅰ, Ⅱ Frequency: (1 ~ 2 000) Hz, Acceleration: (0.98 ~ 980) ㎨
Temperature, Humidity, Vibration : (-70 ~ 150) ℃, (20 ~ 95) % R.H.
Vibration Frequency: (1 ~ 2 000) Hz, Acceleration: (0.98 ~ 980) ㎨, Altitude (0 ~ 100 000) ft
Mechanical Vibrations of Shipboard Equipment (Type I - Environmental Vibration) Vibration Frequency: (1 ~ 2 000) Hz, Acceleration: (0.98 ~ 500) ㎨ |
소재지 |
| MIL-STD-810H:2019 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500.6 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.7 High Temperature
502.7 Low Temperature
505.7 Solar Radiation (Sunshine)
503.7 Temperature shock
506.6 Rain (Procedure III - Drip)
507.6 Humidity
509.7 Salt Fog
510.7 Sand and Dust
513.8 Acceleration
514.8 Vibration
516.8 Shock
519.8 Gunfire vibration Procedure Ⅰ, Ⅱ
520.5 COMBINED ENVIRONMENTS
528.1 Mechanical Vibrations of Shipboard Equipment (Type I - Environmental vibration) |
Low Pressure : (0 ~ 100 000) ft
High Temperature : (15 ~ 180) ℃
Low Temperature : (-70 ~ 35) ℃
Temperature Shock : (-70 ~ 180) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain : (140 ~280) L/㎡/h
Humidity : (23 ~ 60) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl (5 ± 1) %
Sand and Dust: Air Velocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration : (0.98 ~ 500) ㎨
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Shock Acceleration : (0.98 ~ 980 )㎨
Height : (100 ~ 1 800) mm
Gunfire Vibration ProcedureⅠ,Ⅱ Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Temperature, Humidity, Vibration : (-70 ~ 150) ℃, (20 ~ 95) % R.H.
Frequency : (1 ~ 2 000) Hz,
Acceleration : (0.98 ~ 980) ㎨
Altitude (0 ~ 100 000) ft
Mechanical Vibrations of Shipboard Equipment
(Type I – Environmental vibration)
Vibration Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 500) ㎨ |
소재지 |
| MIL-STD-810H w/Change 1:2022 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500.6 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.7 High Temperature
502.7 Low Temperature
505.7 Solar Radiation (Sunshine)
503.7 Temperature shock
506.6 Rain (Procedure III - Drip)
507.6 Humidity
509.8 Salt Fog / Corrosive Environments (Procedure I Corrosion Screening)
510.7 Sand and Dust
513.8 Acceleration
514.8 Vibration
516.8 Shock
519.8 Gunfire vibration Procedure Ⅰ, Ⅱ
520.5 COMBINED ENVIRONMENTS
528.1 Mechanical Vibrations of Shipboard Equipment (Type I - Environmental vibration) |
Low Pressure : (0 ~ 100 000) ft
High Temperature : (15 ~ 180) ℃
Low Temperature : (-70 ~ 35) ℃
Temperature Shock : (-70 ~ 180) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain : (140 ~280) L/㎡/h
Humidity : (23 ~ 60) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl (5 ± 1) %
Sand and Dust: Air Velocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration : (0.98 ~ 500) ㎨
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Shock Acceleration : (0.98 ~ 980 )㎨
Height : (100 ~ 1 800) mm
Gunfire Vibration ProcedureⅠ,Ⅱ Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Temperature, Humidity, Vibration : (-70 ~ 150) ℃, (20 ~ 95) % R.H.
Frequency : (1 ~ 2 000) Hz,
Acceleration : (0.98 ~ 980) ㎨
Altitude (0 ~ 100 000) ft
Mechanical Vibrations of Shipboard Equipment
(Type I – Environmental vibration)
Vibration Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 500) ㎨ |
소재지 |
| KS X IEC 60945:2002 |
해상 항해, 무선통신 기기 및 시스템-일반요구사항-시험 방법과 요구되는 시험결과
8.2 건조 고온
8.3 온 습도
8.4 저온
8.7 진동 |
건조 고온 : (25 ~ 70) ℃
온 습도 : (25 ~ 40) ℃, (50 ~ 93) % R.H.
저온 : (-30 ~ +25) ℃
진동주파수:(2 ~ 100) Hz
가속도: (7 ~ 40) ㎨ |
소재지 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험방법 |
(1 ~ 70) Hz
(1 ~ 490) ㎨ |
소재지 |
| IEC 60945:2002 |
Maritime navigation and radiocommunication equipment and systems－General requirements－Methods of testing and required test results
8.2 Dry heat
8.3 Damp heat
8.4 Low temperature
8.7 Vibration |
Dry Heat : (25 ~ 70) ℃
Damp Heat : (25 ~ 40) ℃, (50 ~ 93) % R.H.
Low Temperature : (-30 ~ +25) ℃
Vibration Frequency : (2 ~ 100) Hz,
Acceleration : (7 ~ 40) ㎨ |
소재지 |
| JESD22-A102E: 2015 |
Accelerated Moisture Resistance - Unbiased Autoclave |
Temperature : (121 ± 2) ℃
(Pressure)205 kPa |
소재지 |
| Lloyd’s Register Type Approval System Test Specification Number 1:2024 |
Performance and Environmental Test Specification for the following Environmentally Tested Products used in Marine Applications:
Electrical Equipment
Control and Monitoring Equipment
Instrumentation and Internal Communication Equipment
Programmable Electronic Systems
7. Insulation Resistance test
10. Inclination test - Static
12. Vibration test 1
13. Vibration test 2
14. Humidity test 1 - Cyclic
15. Humidity test 2 - Steady state
17. Dry heat test
18. Low temperature test
19. High voltage test |
Insulation Resistance Test : DC (48 ~ 500) V
(0.01 ~ 9 990) MΩ
Inclination Degree: Static ±22.5˚
Vibration Frequency:(2 ~ 100) Hz
Acceleration:(7 ~ 40) ㎨
Humidity Test 1 : (20 ~ 55) ℃, (80 ~ 98) % R.H.
Humidity Test 2 : (20 ~ 85) ℃, (10 ~ 95) % R.H.
Dry Heat Test : (25 ~ 70) ℃
Low Temperature Test : (-25 ~ 25) ℃
High Voltage Test : AC (500 ~ 3 000) V |
소재지 |
| DNV-CG-0339:2021 |
Environmental test specification for electrical, electronic and programmable equipment and systems
6. Vibration
7. Dry Heat Test
8. Damp Heat Test
9. Cold Test
12. Insulation Resistance
13. High Voltage |
Vibration Frequency:(2 ~ 100) Hz
Acceleration:(7 ~ 40) ㎨
Dry Heat Test :
(20 ~ 70) ℃
Damp Heat Test:
(25 ~ 55) ℃, (60 ~ 98) % R.H.
Cold Test : (-25 ~ 20) ℃
Insulation Resistance:
DC (48 ~ 500) V
(0.01 ~ 9 990) MΩ
High Voltage :AC (500 ~ 2 500) V |
소재지 |
| IACS UR E 10 Test Specification for Type Approval:2024 |
Type testing condition for equipment covered by E10.1
5. Dry Heat Test
6. Damp Heat Test
7. vibration
9. Insulation Resistance
10. High Voltage
11. Cold Test |
Dry Heat Test : (25 ~ 70) ℃
Damp Heat Test : (25 ~ 55) ℃, (60 ~ 98) % R.H.
Vibration Frequency:(2 ~ 100) Hz
Acceleration:(7 ~ 40) ㎨
Insulation Resistance: DC (48 ~ 500) V, (0.01 ~ 9 990) MΩ
High Voltage : AC (500 ~ 2 500) V
Cold Test : (-25 ~ +25) ℃ |
소재지 |
| IACS UR E 10 Test Specification for Type Approval:2021 |
Type testing condition for equipment covered by E10.1
5. Dry Heat Test
6. Damp Heat Test
7. vibration
9. Insulation Resistance
10. High Voltage
11. Cold Test |
Dry Heat Test : (25 ~ 70) ℃
Damp Heat Test : (25 ~ 55) ℃, (60 ~ 98) % R.H.
Vibration Frequency:(2 ~ 100) Hz
Acceleration:(7 ~ 40) ㎨
Insulation Resistance:DC (48 ~ 500) V (0.01 ~ 9 990) MΩ
High Voltage :AC (500 ~ 2 500) V
Cold Test : (-25 ~ 25) ℃ |
소재지 |
| GC-01-K:2026 |
한국 선급 제조법 및 형식승인 등에 관한 지침 제 23절 자동화시스템 표 3.23.1
6. 건조. 고온 시험
7. 온습도 시험
8. 진동시험
10. 절연저항 시험
11. 내전압 시험
12. 저온시험 |
건조. 고온 시험 : (25 ~ 55) ℃
온습도 시험 : (25 ~55) ℃, (60 ~ 95) % R.H.
진동주파수 : (2 ~ 100) Hz
가속도: (7 ~ 40) ㎨
절연저항 시험 : DC 500 V, (0.01 ~ 9 990) MΩ
내전압 시험 : AC (548 ~ 2 500) V
저온시험: (-25 ~ +25) ℃ |
소재지 |
| 해양수산부 고시 제2019-159호(2019.10.08.) |
선박평형수관리 등에 관한 기준
[별표6] 선박평형수처리설비의 환경시험 기준
2. 환경시험 항목
바. 건조고온시험(Dry heat)
사. 온습도시험(Damp heat)
아. 진동시험(Vibration)
차. 절연저항시험(Insulation resistance)
카. 내전압시험(High voltage)
타. 저온시험(Cold) |
건조고온시험 : (25 ~ 55) ℃
온습도시험 : (25 ~ 55) ℃, (50 ~ 98) % R.H.
진동주파수 : (2 ~ 100) Hz
가속도 : (7 ~ 40) ㎨
절연저항시험 : DC 500 V, (0.01 ~ 9 990) ㏁
내전압시험 : AC (500 ~ 1000 + 정격*2) V
저온시험 : (-25 ~ +25) ℃ |
소재지 |
| KS T ISO 13355:2016 |
포장 - 수송포장화물과 단위화물 - 수직 랜덤 진동 시험방법 |
(2 ~ 200) Hz
(0.167 ~ 100) ㎨ |
소재지 |
국립전파연구원 공고
제2022-7호(2022.02.15.) |
방송통신설비의 내진 시험방법 |
가진 주파수: (0.5 ~ 35) Hz
가진 가속도: (0 ~ 10) ㎨ |
소재지 |
| KS X 3073:2015 |
방송통신설비의 내진 시험방법 |
가진 주파수: (1 ~ 35) Hz
가진 가속도: (0 ~ 10) ㎨ |
소재지 |
| IEC 60068-2-38:2021 |
Environmental testing - Part 2-38:Tests - Test Z/AD: Composite temperature/humidity cyclic test |
Temperature/Humidity Cyclic Test :
(-10 ~ 65) ℃,
(10 ~ 93) % R.H. |
소재지 |
| IEC 60068-2-31:2008 |
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
5.2 Free fall - Procedure 1
5.3 Free fall repeated - Procedure 2 |
(25 ~ 1 500) mm |
소재지 |
| IEC 60068-2-30:2025 |
Environmental testing - Part 2-30: Tests - Tests Db: Damp heat, cyclic (12 h + 12 h cycle) |
Damp Heat, Cyclic :
(25 ~ 55) ℃,
(60 ~ 98) % R.H. |
소재지 |
| IEC 60068-2-27:2008 |
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
Shock Acceleration: (50 ~ 1 000) ㎨ |
소재지 |
| IEC 60068-2-14:2023 |
Environmental testing - Part 2-14: Tests - Test N: Change of temperature
7. Test Na: Rapid change of temperature
8. Test Nb: Change of temperature with specified rate of change |
Change of Temperature : (-65 ~ +175) ℃ |
소재지 |
| IEC 60068-2-6:2007 |
Environmental testing - Part 2-6: Tests - Test Fc: Vibration ( sinusoidal ) |
(1 ~ 2 000) Hz
(0.98 ~ 500) ㎨ |
소재지 |
| KS C IEC 60529:2013 |
외함의 밀폐보호등급 구분 (IP 코드) |
방진 : IP1X ~ IP6X, 방수 IPX1 ~ IPX8 |
소재지 |
| KS C IEC 60571:2012 |
철도 적용 – 철도 차량용 전자기기
12.2.4 냉각 시험
12.2.5 내열성 시험
12.2.6 내습 사이클 시험
12.2.10 절연 시험
12.2.12 진동, 충격 및 충돌 시험
12.2.13 방수 시험
12.2.15 저온 저장 시험 |
냉각 시험 : (-40 ~ 25) ℃
내열성 시험 : (25 ~ 85) ℃
내습 사이클 시험 : (25 ~ 55) ℃, (60 ~ 95) % R.H.
절연시험 : DC 500 V, (0.01 ~ 9 990) MΩ, AC (500 ~ 1 500) V
진동 주파수: (2 ~ 500) Hz
진동 가속도:(0.37 ~ 300) ㎨
충격 가속도:(0.37 ~ 1 000) ㎨
방수 : IPX1 ~ IPX8
저온저장온도 :(-40 ~ +25) ℃ |
소재지 |
| KS C IEC 61373:2010 |
철도적용-철도차량 장치-충격 및 진동시험
Category 1, 2, 3 |
진동 주파수: (2 ~ 500) Hz
진동 가속도:(0.37 ~ 300) ㎨
충격 가속도:(0.37 ~ 1 000) ㎨ |
소재지 |
| MIL-STD-810D:1983 |
MILITARY STANDARD ENVIRONMENTAL TEST METHODS AND ENGINEERING GUIDELINES
500.3 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
509.3 Salt Fog
510.2 Sand and Dust |
Low Pressure(Altitude) : (0 ~ 100 000) ft
Salt Fog : 35 ℃, NaCl 5 %
Sand and Dust: AirVelocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥ |
소재지 |
| IEC 60068-2-57:2013 |
Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method |
(1 ~ 100) Hz,
(0.98 ~ 500) ㎨ |
소재지 |
| IEC 60068-2-64:2008+AMD1:2019 CSV |
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
Vibration : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 300) ㎨ |
소재지 |
| KS C IEC 60068-2-1:2007 |
환경 시험-제2-1부: 시험-시험A:내한성시험 |
내한성 시험 : (-65 ~ +5) ℃ |
소재지 |
| KS C IEC 60068-2-2:2007 |
환경 시험 - 제2-2부: 시험 - 시험 B: 내열성 시험 |
(30 ~ 200) ℃ |
소재지 |
| KS C IEC 60068-2-6:2015 |
환경 시험 - 제2-6부: 시험 - 시험 Fc: 진동(정현파) |
(1 ~ 2 000) Hz
(0.98 ~ 500) ㎨ |
소재지 |
| IEC 60068-2-2:2025 |
Environmental testing - Part 2-2: Tests - Tests B: Dry heat |
Dry Heat : (30 ~ 175) ℃ |
소재지 |
| IEC 60068-2-1:2025 |
Environmental testing Part 2-1: Tests - Test A: Cold |
Cold : (-65 ~ +5) ℃ |
소재지 |
| KS C IEC 60068-2-14:2023 |
환경 시험 - 제2-14부: 시험 - 시험 N: 온도 변화
7 시험 Na: 규정된 이동시간을 갖는 온도의 급변
8 시험 Nb: 규정된 변화율을 갖는 온도 변화 |
온도변화시험 : (-65 ~ +175) ℃ |
소재지 |
| KS C IEC 60068-2-27:2008 |
환경시험-제2-27부:시험-시험Ea와 지침: 충격 시험 |
충격가속도: (50 ~ 1 000) ㎨ |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경 시험 – 제2-30부: 시험 - 시험 Db와 지침: 주기적 내습(12 h+12 h 주기) |
주기적 내습 시험
(25 ~ 55) ℃
(60 ~ 98) % R.H. |
소재지 |
| KS C IEC 60068-2-31:2008 |
환경 시험 - 제2-31부: 시험 - 시험 Ec: 주로 장비형 시편에 사용하는 거친 취급시 충격
5.2 자유낙하 - 절차 1
5.3 반복 자유낙하 - 절차 2 |
(25 ~ 1 500) mm |
소재지 |
| KS C IEC 60068-2-38:2021 |
환경 시험 - 제2-38부: 시험 - 시험 Z/AD: 합성 온도/습도 사이클 시험 |
(-10 ~ 65) ℃,
(10 ~ 93) % R.H. |
소재지 |
| MIL-STD-810C:1975 |
MILITARY STANDARD ENVIRONMENTAL TEST METHODS
500.1 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.1 High temperature
502.1 Low temperature
506.1 Rain (Procedure III – Drip)
507.1 Humidity
509.1 Salt Fog
510.1 Dust (Fine Sand)
513.2 Acceleration
514.2 Vibration
516.2 Shock |
Low Pressure(Altitude) : (0 ~ 100 000) ft
High Temperature : (23 ~ 180) ℃
Low Temperature : (-70 ~ 23) ℃
Rain (Procedure III –Drip) : 280 L/㎡/h
Humidity : (21 ~ 65) ℃, (50 ~ 95) % R.H
Salt Fog : 35 ℃, NaCl 5 %
Sand and Dust : AirVelocity (0 ~ 29) ㎧,
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration:(0.98 ~ 500) ㎨
Vibration Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨
Shock Acceleration:(0.98 ~ 980) ㎨
Height:(100 ~ 1 800) mm |
소재지 |
| MIL-STD-202H:2015 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS
101 SALT ATMOSPHERE
103 HUMIDITY
106 MOISTURE RESISTANCE,
107 THERMAL SHOCK
108 LIFE
201 VIBRATION
204 VIBRATION, HIGH FREQUENCY
212 ACCELERATION
213 SHOCK
214 RANDOM VIBRATION |
SALT : 35 ℃, NaCl (5 ± 1) %
HUMIDITY : (23~ 40)℃,
MOISTURE RESISTANCE: (-10 ~ 65) ℃,
(50 ~ 95) % R.H
THERMAL SHOCK : Min -65 ℃, Max 150 ℃
LIFE : Max 71 ℃
Vibration Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 500) ㎨
Vibration , High Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨
Acceleration:(0.98 ~ 500) ㎨
Shock Acceleration:(0.98 ~ 980) ㎨
Random Vibration Frequency:(1 ~ 2000) Hz
Acceleration:(0.98 ~ 980) ㎨ |
소재지 |
| EN 50155:2026 |
Railway applications - Rolling stock - Electronic equipment
13.4.4 Low temperature test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Insulation test
13.4.8 Cyclic damp heat test
13.4.10 Shock and Vibration
13.4.10.5 Enclosure protection test (IP code) |
Low Temperature Test: (-40 ~ 25) ℃
Dry Heat Test : (25 ~ 85) ℃
Low Temperature Storage Test: (-40 ~ 25) ℃
Insulation Test : DC 500 V, AC (500 ~ 1 500) V, DC (750 ~ 2 200) V
Cyclic Damp Heat Test : (25~ 55) ℃, (60 ~ 98) % R.H.
Vibration Frequency:(2 ~ 500) Hz,
Vibration Acceleration:(0.37 ~ 300) ㎨
Shock Acceleration:(0.37 ~ 1 000) ㎨ |
소재지 |
| EN 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests Category 1, 2, 3 |
Vibration Frequency:(2 ~ 500) Hz,
Vibration Acceleration:(0.37 ~ 300) ㎨
Shock Acceleration:(0.37 ~ 1 000) ㎨ |
소재지 |
| KS C 7620:2003 |
철도 차량용 형광등 기구
7.10 진동시험 |
진동 수 10 c/s, 진폭 2 mm |
소재지 |
| KS R 1034:2023 |
자동차 부품 진동 시험 방법 |
(5 ~ 2 000) Hz,
(4.9 ~ 490) ㎨ |
소재지 |
| Telcordia GR-63-CORE Issue5:2017 |
NEBS Requirements: Physical Protection
5.3.1 Handling Drop Tests - Packaged Equipment
5.4.1 Earthquake Test Methods
5.4.2 Office Vibration Test Procedure
5.4.3 Transportation Vibration - Packaged Equipment |
Handling Drop Tests : (300 ~ 1 000) mm
Earthquake Test : (1 ~ 50) Hz, (2 ~ 15.7) ㎨
Office Vibration Frequency:(5 ~ 200) Hz,
Office Vibration Acceleration:(0.1 ~ 10) ㎨
Transportation Vibration Frequency:(5 ~ 200) Hz,
Transportation Vibration Acceleration:(0.1 ~ 10) ㎨ |
소재지 |
| AC156 (24) 2nd Edition |
ACCEPTANCE CRITERIA FOR SEISMIC CERTIFICATION BY SHAKE-TABLE TESTING OF NONSTRUCTURAL COMPONENTS |
Frequency:(0.5 ~ 33.3) Hz
Acceleration:(0 ~ 45) ㎨ |
소재지 |
| 46 CFR Part 162:2012 |
162.060-30 Testing requirements for ballast water management system (BWMS) components
- Temperature test
- Humidity test
-Vibration test |
Cold Test : (-25 ~ +25) ℃
Dry Heat Test : (25 ~ 55) ℃
Damp Heat Test : (25 ~ 55) ℃, (50 ~ 90) % R.H.
Vibration Test : (2 ~ 80) Hz, (7 ~ 40) ㎨ |
소재지 |
| AEC-Q100-002-REV-E:2013 |
Human Body Model Electrostatic Discharge Test |
Voltage : ±50 V ~ ±8 000 V |
소재지 |
| JESD22-A108G:2022 |
Temperature, Bias, and Operating Life |
온도: (-40 ~ 150) ℃ |
소재지 |
| JESD22-A110E.01:2021 |
Highly Accelerated Temperature and Humidity Stress Test (HAST) |
(110 ~ 130) ℃
(122 ~ 230) kPa |
소재지 |
| JESD22-A113J:2026 |
Preconditioning of Nonhermetic Surface Mount Devices Prior to Reliability Testing |
Temperature : (30 ~ 125) ℃
Humidity : (60 ~ 85) % R.H.
Reflow Temp : (150 ~ 300) ℃ |
소재지 |
| JESD22-A115C:2010 |
Electrostatic Discharge (ESD) Sensitivity Testing, Machine Model (MM) |
Voltage : ±100 V ~ ±400 V |
소재지 |
| JESD22-A118B.01:2021 |
Accelerated Moisture Resistance - Unbiased HAST |
(110 ~ 130) ℃
(122 ~ 230) kPa |
소재지 |
| JESD22-A119A:2015 |
Low Temperature Storage Life |
(-65 ~ -40) ℃ |
소재지 |
| JESD22-B101D:2022 |
External Visual |
- |
소재지 |
| JESD22-B110B.01:2019 |
Mechanical Shock – Device and Subassembly |
충격량: (980 ~ 28 420) ㎨ |
소재지 |
| JESD22-B113C:2025 |
Board Level Cyclic Bend Test Method for Interconnect Reliability Characterization of SMT ICs for Handheld Electronic Products |
주파수: (1 ~ 3) Hz
깊이: (2 ~ 4) mm |
소재지 |
| JESD47M:2025 |
Stress-Test-Driven Qualification of Integrated Circuits |
HTOL온도: (55 ~ 150) ℃
ELFR온도: (55 ~ 150) ℃
LTOL온도: (-70 ~ 50) ℃ |
소재지 |
| JESD74A:2007 |
Early Life Failure Rate Calculation Procedure for Semiconductor Components |
N/A |
소재지 |
| JESD78F.02: 2023 |
IC Latch-Up Test |
전압: ±1 V ~ ±100 V
전류: ±10 mA ~ ±2 A |
소재지 |
| JESD22-A101D.01:2021 |
Steady State Temperature Humidity Bias Life Test |
(85 ± 2) ℃
(85 ± 5) % R.H. |
소재지 |
| AEC-Q101-REV-E:2021 |
Failure Mechanism Based Stress Test Qualification For Discrete Semiconductors In AUTOMOTIVE APPLICATIONS |
HBM Voltage: ±50 V ~ ±8 000 V
CDM Voltage: ±125 V ~ ±1 000 V |
소재지 |
| KS C IEC 60255-21-1:1988 |
전기계전기 제21-1부: 보호 계전기와 보호 기기의 진동,충격,충돌,지진 시험 ― 진동 시험 용어 |
Frequency (10 ~ 150) Hz
Acceleration (0.98 ~ 20) ㎨ |
소재지 |
| KS C IEC 60255-21-2:1988 |
전기계전기 제21-2부: 보호계전기와 보호 기기의 진동,충격,충돌,지진 시험 ― 지진 시험 |
Acceleration (50 ~ 300) ㎨ |
소재지 |
| KS C IEC 60255-21-3:1993 |
전기계전기 ― 제21-3부 : 보호계전기와 보호 기기의 진동, 충격, 충돌, 지진시험 ― 지진시험 |
Frequency: (1 ~ 50) Hz
Acceleration: (0 ~ 20) ㎨ |
소재지 |
| IEC 60255-21-1:1988 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal) |
Frequency (10 ~ 150) Hz
Acceleration (0.98 ~ 20) ㎨ |
소재지 |
| IEC 60255-21-2:1988 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests |
Acceleration (50 ~ 300) ㎨ |
소재지 |
| IEC 60255-21-3:1993 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests |
Frequency: (1 ~ 50) Hz
Acceleration: (0 ~ 20) ㎨ |
소재지 |
| KS C IEC 60255-1:2009 |
측정 계전기와 보호 장치 ― 제1부: 공통 요구사항
6.13.1 진동 응답과 내구성(정현파)
6.13.2 충격 응답, 내충격성, 반복충격
6.12.3.1 동작 중 내열성 시험
6.12.3.2 동작 중 내한성 시험
6.12.3.3 최대 보관 온도에서의 내열성 시험
6.12.3.4 최소 보관 온도에서의 내한성 시험
6.12.3.5 온도 변화 시험
6.12.3.6 정상상태 내열내습성 시험
6.12.3.7 습도를 포함한 온도 사이클 시험 |
Frequency (10 ~ 150) Hz
Acceleration (0.98 ~ 300) ㎨
온도 ( -40 ~ 70) ℃
습도 (45 ~ 97) % R.H. |
소재지 |
| JESD22-A105D:2020 |
Power and Temperature Cycling |
(-40 ~ 125) ℃ |
소재지 |
| JESD22-A104F.01: 2023 |
Temperature Cycling |
(-65 ~ 150) ℃ |
소재지 |
| AEC-Q100-004-REV-D:2012 |
IC Latch-Up Test |
Voltage : ±1 V ~ ±100 V
Current : ±10 mA ~ ±2 A |
소재지 |
| AEC-Q100-008-REV-A:2003 |
Early Life Failure Rate (ELFR) |
(70 ~ 150) ℃ |
소재지 |
| AEC-Q100-011-REV-D:2019 |
Charged Device Model (CDM) Electrostatic Discharge (ESD) Test |
Voltage : ±125 V ~ ±1 000 V |
소재지 |
| IPC/JEDEC J-STD-020F:2022 |
Moisture/Reflow Sensitivity Classification for Nonhermetic Surface Mount Devices |
Temperature : (30 ~ 125) ℃
Humidity : (60 ~ 85) % R.H.
Reflow Temp : (150 ~ 300) ℃ |
소재지 |
| IACS UR E 10 Test Specification for Type Approval:2023 |
Type testing condition for equipment covered by E10.1
5. Dry Heat Test
6. Damp Heat Test
7. vibration
9. Insulation Resistance
10. High Voltage
11. Cold Test |
Dry Heat Test : (25 ~ 70) ℃
Damp Heat Test : (25 ~ 55) ℃, (60 ~ 98) % R.H.
Vibration Frequency:(2 ~ 100) Hz
Acceleration:(7 ~ 40) ㎨
Insulation Resistance: DC (48 ~ 500) V,
(0.01 ~ 9 990) MΩ
High Voltage : AC (500 ~ 2 500) V
Cold Test : (-25 ~ +25) ℃ |
소재지 |
| MIL-STD-810F:2000 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500.4 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.4 High temperature
502.4 Low temperature
505.4 Solar Radiation (Sunshine)
506.4 Rain (Procedure III - Drip)
507.4 Humidity
509.4 Salt Fog
510.4 Sand and Dust
513.5 Acceleration
514.5 Vibration
516.5 Shock
519.5 Gunfire vibration Procedure Ⅰ, Ⅱ
520.2 Temperature, Humidity, Vibration and Altitude |
Low Pressure(Altitude) : (0 ~ 100 000) ft
High Temperature : (15 ~ 180) ℃
Low Temperature : (-70 ~ 35) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain : (140 ~ 280) L/㎡/h
Humidity : (20 ~ 60) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl (5 ± 1) %
Sand and Dust : Air Velocity (0 ~ 29) ㎧
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration:(0.98 ~ 500) ㎨
Vibration Frequency:(1 ~ 2 000) Hz,
Acceleration:(0.98 ~ 980) ㎨
Shock Acceleration:(0.98 ~ 980) ㎨
Height:(100 ~ 1 800) mm
Gunfire Vibration ProcedureⅠ,Ⅱ Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨
Temperature, Humidity,
Vibration : (-70 ~ 150) ℃, (10 ~ 99) % R.H.
Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨,
Altitude (0 ~ 100 000) ft |
소재지 |
| AEC-Q101-001-REV-A:2005 |
Human Body Model (HBM) Electrostatic Discharge (ESD) Test |
Voltage : ±50 V ~ ±8 000 V |
소재지 |
| AEC-Q101-005-REV-A:2019 |
Charged Device Model (CDM) Electrostatic Discharge (ESD) Test |
Voltage : ±125 V ~ ±1 000 V |
소재지 |
ANSI/ESDA/JEDEC
JS-002-2022 |
For Electrostatic Discharge Sensitivity Testing Charged Device Model (CDM) - Device Level |
Voltage : ±125 V ~ ±1 000 V |
소재지 |
ANSI/ESDA/JEDEC
JS-002-2025 |
For Electrostatic Discharge Sensitivity Testing Charged Device Model (CDM) - Device Level |
Voltage : ±125 V ~ ±1 000 V |
소재지 |
ANSI/ESDA/JEDEC
JS-001-2024 |
For Electrostatic Discharge Sensitivity Testing Human Body Model (HBM) - Component Level |
Voltage : ±50 V ~ ±8 000 V |
소재지 |
| ABS Rules for Building and Classing Marine Vessels:2026 |
PART 4 Vessel Systems and Machinery Chapter 9 Automation and Computer Based Systems Section 9 Equipment Table 1 Type Tests for Control, Monitoring and Safety Equipment
3. Dry Heat Test
4. Damp Heat Test
5. Vibration test
7. Insulation Resistance
8. High Voltage
9. Cold Test |
Dry Heat Test : (25 ~ 70) ℃
Damp Heat Test :
(25 ~ 55) ℃
(45 ~ 98) % R.H.
Vibration Frequency:(2 ~ 100) Hz,
Acceleration:(7 ~ 40) ㎨
Insulation Resistance : DC 500 V,
(0.01 ~ 9 990) MΩ
High Voltage : AC (500 ~ 5 000) V
Cold Test : (-25 ~ 25) ℃ |
소재지 |
| IEEE Std 693:2018 |
IEEE Recommended Practice for Seismic Design of Substations |
Frequency: (1 ~ 50) Hz
Acceleration: (0 ~ 10) ㎨ |
소재지 |
| DS-0050(2021.04.14.) |
송배전설비 내진설계기준 |
가진 주파수: (1 ~ 50) Hz
가진 가속도: (0 ~ 40) ㎨ |
소재지 |
| IEC 60255-1:2022 |
Measuring relays and protection equipment - Part 1: Common requirements
6.13 Mechanical requirements
6.13.1 Vibration response and endurance (sinusoidal)
6.13.2 Shock response, shock withstand and bump
6.12.3.1 Dry heat test – Operational
6.12.3.2 Cold test – Operational
6.12.3.3 Dry heat test at maximum storage temperature
6.12.3.4 Cold test at minimum storage temperature
6.12.3.5 Change of temperature test
6.12.3.6 Damp heat steady-state test
6.12.3.7 Cyclic temperature with humidity test |
Frequency (10 ~ 150) Hz
Acceleration (0.98 ~ 300) ㎨
Temperature (－40 ~ 70) ℃ Humidity (45 ~ 97) % R.H. |
소재지 |
| KS C IEC 60068-2-78:2012 |
환경 시험 – 제2-78부: 시험 - Cab: 안정상태의 내습성 시험 |
(28 ~ 42) ℃
(82 ~ 96) % R.H. |
소재지 |
| IEC 60529:1989+A1:1999+A2:2013 |
Degrees of protection provided by enclosures (IP Code) |
방진 : IP1X ~ IP6X, 방수 IPX1 ~ IPX8 |
소재지 |
| IEC 60571:2012 |
Railway applications – Electronic equipment used on rolling stock
12.2.4 Cold start test
12.2.5 Dry heat test
12.2.6 Damp heat test, cyclic
12.2.10 Insulation test
12.2.12 Vibration, shock and bump test
12.2.13 Watertightness test
12.2.15 Low temperature storage test |
Cold Start Test : (-40 ~ 25) ℃
Dry Heat Test : (25 ~ 85) ℃
Damp Heat Test, Cyclic : (25 ~ 55) ℃,
(60 ~ 95) % R.H.
Insulation Test : DC 500 V, (0.01 ~ 9 990) MΩ, AC(500 ~ 1 500) V
Vibration Frequency: (2 ~ 500) Hz,
Vibration Acceleration: (0.37 ~ 300) ㎨
Shock Acceleration: (0.37 ~ 1 000) ㎨
Watertightness Test : IPX1 ~ IPX8
Low Temperature Storage Test : (-40 ~ +25) ℃ |
소재지 |
| IEC 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests
Category 1, 2, 3 |
Vibration Frequency: (2 ~ 500) Hz,
Vibration Acceleration: (0.37 ~ 300 ) ㎨
Shock Acceleration: (0.37 ~ 1 000) ㎨ |
소재지 |
| MIL-STD-810E:1989 |
MILITARY STANDARD ENVIRONMENTAL TEST METHODS AND ENGINEERING GUIDELINES
500.3 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.3 High temperature
502.3 Low temperature
505.3 Solar Radiation (Sunshine)
506.3 Rain (Procedure II - Drip)
507.3 Humidity
509.3 Salt Fog
510.3 Sand and Dust
513.4 Acceleration
514.4 Vibration
516.4 Shock |
Low Pressure(Altitude) : (0 ~ 100 000) ft
High Temperature : (23 ~ 180) ℃
Low Temperature : (-70 ~ 23) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain (Procedure II -Drip) : 280 L/㎡/h
Humidity : (23 ~ 71) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl 5 %
Sand and Dust: Air Velocity (0 ~ 29) ㎧
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration :(0.98 ~ 500) ㎨
Vibration Frequency : (1 ~ 2 000) Hz
Acceleration : (0.98 ~ 980) ㎨
Shock Acceleration : (0.98 ~ 980) ㎨
Height : (100 ~ 1 800) mm |
소재지 |
| MIL-STD-810F:2003 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500.4 Low Pressure (Altitude) Procedure Ⅰ, Ⅱ
501.4 High temperature
502.4 Low temperature
505.4 Solar Radiation (Sunshine)
506.4 Rain (Procedure III - Drip)
507.4 Humidity
509.4 Salt Fog
510.4 Sand and Dust
513.5 Acceleration
514.5 Vibration
516.5 Shock
519.5 Gunfire vibration Procedure Ⅰ, Ⅱ
520.2 Temperature, Humidity, Vibration and Altitude |
Low Pressure(Altitude) : (0 ~ 100 000) ft
High Temperature : (15 ~ 180) ℃
Low Temperature : (-70 ~ 35) ℃
Solar Temperature : (-20 ~ 100) °C,
Solar Irradiation : (0 ~ 1 150) W/㎡
Rain : (140 ~ 280) L/㎡/h
Humidity : (23 ~ 60) ℃, (10 ~ 95) % R.H.
Salt Fog : 35 ℃, NaCl (5 ± 1) %
Sand and Dust : Air Velocity (0 ~ 29) ㎧
Sand Concentration : (0.18 ~ 2.2) g/㎥
Dust Concentration : (3.6 ~ 17.6) g/㎥
Acceleration:(0.98 ~ 500) ㎨
Vibration Frequency:(1 ~ 2 000) Hz,
Acceleration:(0.98 ~ 980) ㎨
Shock Acceleration:(0.98 ~ 980) ㎨
Height:(100 ~ 1 800) mm
Gunfire Vibration ProcedureⅠ,Ⅱ Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨
Temperature, Humidity, Vibration : (-70 ~ 150) ℃, (10 ~ 99) % R.H.
Frequency:(1 ~ 2 000) Hz
Acceleration:(0.98 ~ 980) ㎨,
Altitude (0 ~ 100 000) ft |
소재지 |
| IEC 60068-2-78:2025 |
Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state |
(28 ~ 42) ℃
(82 ~ 96) % R.H. |
소재지 |
