home검색서비스>시험기관검색

시험기관검색KOLAS Search Service

시험은 특정한 제품,공정 또는 서비스를 대상으로 하나 또는 그 이상의 특성을 규정된 절차에 따라 측정하는 기술적인 작업, 설계, 제품, 서비스, 공정, 공장에 대한 조사 및 특정요건이나 전문적 판정, 일반요건을 근거로 한 적합성 판정을 말한다.

인정번호 (Accreditation No) KT009
기관명
(Organization Name)		 한국산업기술시험원
공인유효기간 2026-09-30 ~ 2030-09-29
주소 경상남도 진주시 충의로 10
소재지 경상남도 진주시 충의로 10
소재지-1 서울특별시 구로구 디지털로26길 87
소재지-2 경기도 안산시 상록구 해안로 723
소재지-3 충청남도 천안시 서북구 직산읍 직산로 112
소재지-4 경기도 화성시 기배로 60-33, 204호
소재지-5 경상남도 진주시 상대로72번길 16, 10
소재지-6 강원특별자치도 원주시 지정면 기업도시로 200
소재지-7 경기도 김포시 양촌읍 황금1로 122
소재지-8 충청남도 서천군 마서면 장항산단13길 32
부속시설-1 전라북도 군산시 새만금산단3로 57
부속시설-2 충청남도 천안시 서북구 직산읍 직산로 136
부속시설-3 경기도 화성시 기배로 60-33, BF2~F1
부속시설-4 서울특별시 강남구 광평로39길 112
담당자 용혜빈
전화 번호 080-808-0114
팩스 번호 055-791-3359
인정범위 역학시험
인정범위 전기시험
인정범위 음향및진동시험
인정범위 열및온도측정
인정범위 화학시험
규격번호
(Test method)		 규격명
(Standard designation)		 시험범위
(Test Range)		 사업장
(Site)
▶ 금속 및 관련제품
ASTM E10-23 Standard Test Method for Brinell Hardness of Metallic Materials HBW 10/3000 : (180 ~ 350) HBW 소재지
ASTM E18-25 Standard Test Methods for Rockwell Hardness of Metallic Materials HRA : 32 ~ 86
HRB : 40 ~ 94
HRC : 26 ~ 64		 소재지
ASTM E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials HV 0.2 ~ HV 10 소재지
ASTM E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials Axial force in tension and compression:
Max. 200 kN		 소재지
ASTM E606/E606M-21 Standard Test Method for Strain-Controlled Fatigue Testing Axial force in tension and compression:
Max. 200 kN
Extensometer gauge lengths:
25 mm and 50 mm		 소재지
KS B 0811:2003 금속 재료의 비커스 경도 시험 방법 HV 0.2 ~ HV 10 소재지
KS B 0806:2000 금속 재료의 로크웰 경도 시험 방법 HRA : 32 ~ 86
HRB : 40 ~ 94
HRC : 26 ~ 64		 소재지
KS B 0805:2000 금속 재료의 브리넬 경도 시험 방법 HBW 10/3000 : (180~350) HBW 소재지
KS B 0802:2003 금속 재료 인장 시험 방법 시험 하중 : 최대 1.0 MN
연신율계 표점거리 : 25 mm 및 50 mm
파단 후 표점거리 : 최대 150 mm
단면 감소율 :
직경・두께 최대 25 mm
폭 최대 150 mm		 소재지
ISO 6507-1:2023 Metallic materials - Vickers hardness test - Part 1 : Test method HV 0.2 ~ HV 10 소재지
ASTM E8/E8M-25 Standard Test Methods for Tension Testing of Metallic Materials Test Load : Max. 1.0 MN
Extensometer gauge lengths : 25 mm and 50 mm
Gauge length after fracture : Max. 150 mm
Cross-sectional dimensions : diameter/thickness Max. 25 mm
width Max. 150 mm		 소재지
ASTM A370-26 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

14.2 Yield Strength
14.3 Tensile Strength
14.4 Elongation
14.5 Reduction of Area		 Test Load : Max. 1.0 MN
Extensometer gauge lengths : 25 mm and 50 mm
Gauge length after fracture : Max. 150 mm
Cross-sectional dimensions:
diameter/thickness Max. 25 mm
width Max. 150 mm		 소재지
KS P ISO 14801:2016 치과-임플란트-골내 임플란트의 동적 하중 시험 시험 하중 : 최대 9 kN 소재지
ISO 14801:2016 Dentistry -- Implants -- Dynamic loading test for endosseous dental implants Test Load : Max. 9 kN 소재지
ISO 6508-1:2023 Metallic materials - Rockwell hardness test - Part 1 : Test method HRA : 32 ~ 86
HRB : 40 ~ 94
HRC : 26 ~ 64		 소재지
ISO 6892-1:2019 Metallic material - Tensile testing - Part 1 : Method of test at room Temperature Test Load : Max. 1.0 MN
Extensometer gauge lengths : 25 mm and 50 mm
Gauge length after fracture : Max. 150 mm
Cross-sectional dimensions :
diameter/thickness Max. 25 mm
width Max. 150 mm		 소재지
ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1 : Test method HBW 10/3000 : (180~350) HBW 소재지
ISO 16573-1 :2020 Steel-Measurement method for the evaluation of hydrogen embrittlement resistance of high strength steels-Part 1: Constant load test Thermal Desorption
Temperature : (400 ~ 800) ℃
Force : 250 kN or less		 소재지
ASTM F2077-24 Standard Test Methods for Intervertebral Body Fusion Devices Test Load: Max. 90 kN 소재지
ASTM F1798-24 Standard Test Method for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants Test Load: Max. 9 kN 소재지
ASTM F1717-21 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model Test Load: Max. 9 kN 소재지
ISO 12189:2008 Implants for surgery - Mechanical testing of implantable spinal devices - Fatigue test method for spinal implant assemblies using an anterior support Test Load: Max. 9 kN 소재지
ASTM E21-20 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

10.2 Tensile Strength
10.3 Elongation after fracture
10.4 Reduction of Area – circular cross-section specimens only		 Test load: Max. 90 kN
Test temperature:
50 °C to 150 °C
Gauge length after fracture: Max. 150 mm		 소재지
▶ 플라스틱 및 관련제품
ASTM D7136/D7136M-25 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event (1 ~ 1 800) J 소재지
ASTM D695-26 Standard Test Method for Compressive Properties of Rigid Plastics (0 ~ 300) kN 소재지
ASTM D790-25 Standard Test Methods for Flexural Properties of Un-reinforced and Reinforced Plastics and Electrical Insulating Materials (0 ~ 300) kN 소재지
ASTM D2344/D2344M- 22 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates (0 ~ 300) kN 소재지
ASTM D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials (0 ~ 300) kN 소재지
ASTM D3165-07 (Reapproved 2023) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies (0 ~ 300) kN 소재지
ASTM D3479/D3479M-19 Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials (0 ~ 300) kN 소재지
ASTM D3518/D3518M-18 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45 ° Laminate (0 ~ 300) kN 소재지
ASTM D5379/D5379M-19 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method (0 ~ 300) kN 소재지
ASTM D5766/D5766M- 23 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates (0 ~ 300) kN 소재지
ASTM D5961/D5961M- 23 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates (0 ~ 300) kN 소재지
ASTM D6484/D6484M- 23 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates (0 ~ 300) kN 소재지
ASTM D6641/D6641M-23 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression(CLC) Test Fixture (0 ~ 300) kN 소재지
ASTM D6742/D6742M- 23 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates (0 ~ 300) kN 소재지
ASTM D7137/D7137M- 23 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates (0 ~ 1 000) kN
(1 ~ 1 800) J		 소재지
ASTM D7264-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials (0 ~ 300) kN 소재지
SACMA SRM 1R-94 Recommended Test Method for Compressive Properties of Oriented Fiber-Resin Composites (0 ~ 300) kN 소재지
ASTM D638-22 Standard Test Method for Tensile Properties of Plastics (0 ~ 300) kN 소재지
▶ 측정용 기계기구
KS M 0011:2013 수용액의 pH 측정 방법
7.1절, 8절		 (4 ~ 10) pH (25 ℃) 소재지
KS I 8001:2009 전기 전도율 측정 방법 통칙
8.1 절		 (5 ~ 10 000) μS/cm (25 ℃) 소재지
▶ 전선, 케이블, 전로용품
KS C IEC 60332-1-2:2015 화재 조건에서의 전기/광섬유 케이블 시험
- 제1-2부 : 단심 절연 전선 또는 케이블 수직 불꽃 전파 시험 — 1 kW 혼합 불꽃 시험 절차		 길이: (600 ± 25) mm 소재지
KS C IEC 60245-8:2012 정격전압 450/750 V 이하 고무 절연케이블 - 제8부 : 전기기기용 고유연성 고무코드 AC 450/750 V 이하 소재지
KS C IEC 60245-5:1994 정격전압 450/750V 이하 고무 절연 케이블 - 제5부 : 고무 리프트 케이블 AC 450/750 V 이하 소재지
KS C IEC 60245-4:2011 정격전압 450/750 V 이하 고무 절연 케이블 - 제4부 : 고무코드, 유연성 케이블 AC 450/750 V 이하 소재지
KS C IEC 60245-3:1994 정격전압 450/750V 이하 고무 절연 케이블 - 제3부 : 내열 실리콘 고무절연 전선 AC 450/750 V 이하 소재지
KS C IEC 60245-2:1998 정격전압 450/750V 이하 고무 절연 케이블 - 제2부 : 시험방법 AC 450/750 V 이하 소재지
KS C IEC 60245-1:2008 정격전압 450/750 V 이하 고무 절연케이블 - 제1부 : 일반요구사항 AC 450/750 V 이하 소재지
IEC 60245-8:2012  Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8 : Cords for applications requiring high flexibility AC 450/750 V or less 소재지
IEC 60332-1-2:2015 Tests on electric and optical fibre cables under fire conditions - Part 1-2 : Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame AC 450/750 V or less 소재지
KC 60799:2025 전기용 부속품 - 코드 셋 및 상호연결 코드셋 AC 1 000 V 이하 소재지
KS C IEC 60799:1998 전기용 부속품 - 코드 셋 및 상호연결 코드셋 1 000 V 이하 소재지
IEC 60227-1:2007  Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1 : General requirements AC 450/750 V or less 소재지
IEC 60227-2:2003 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2 : Test methods AC 450/750 V or less 소재지
IEC 60227-3:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3 : Non-sheathed cables for fixed wiring AC 450/750 V or less 소재지
IEC 60245-4:2011 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4 : Cords and flexible cables AC 450/750 V or less 소재지
IEC 60245-3:2011 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3 : Heat resistant silicone insulated cables AC 450/750 V or less 소재지
IEC 60245-2:1998  Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2 : Test methods AC 450/750 V or less 소재지
IEC 60245-1:2008  Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1 : General requirements AC 450/750 V or less 소재지
IEC 60228:2004  Conductors of insulated cables AC 450/750 V or less 소재지
IEC 60227-7:2012  Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7 : Flexible cables screened and unscreened with two or more conductors AC 450/750 V or less 소재지
IEC 60227-6:2001  Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6 : Lift cables and cables for flexible connections AC 450/750 V or less 소재지
IEC 60227-5:2011  Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5 : Flexible cables (cords) AC 450/750 V or less 소재지
IEC 60227-4:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4 : Sheathed cables for fixed wiring AC 450/750 V or less 소재지
KC 60332-1:2015 전기케이블의 난연성시험 - 제1부 : 절연전선 또는 케이블의 수직 배치 시험 길이: (600 ± 25) mm 소재지
KC 60245-8:2015 정격전압 450/750V이하의 고무절연케이블 - 제8부 : 전기기기용 고유연성 고무코드 AC 450/750 V 이하 소재지
KC 60245-7:2015 정격전압 450/750V이하의 고무절연케이블 - 제7부 : 내열성 에틸렌 비닐아세테이트 고무 절연전선 AC 450/750 V 이하 소재지
KS C IEC 60227-6:2001 정격전압 450/750V 이하 염화비닐 절연케이블 - 제6부 : 비닐 리프트 케이블과 연결용 유연성 케이블 AC 450/750 V 이하 소재지
KS C IEC 60227-1:2007 정격전압 450/750 V 이하 염화비닐 절연 케이블 - 제1부 : 일반요구사항 AC 450/750 V 이하 소재지
KS C IEC 60227-2:2003 정격전압 450/750V 이하 염화비닐절연 케이블 - 제2부 : 시험방법 AC 450/750 V 이하 소재지
KS C IEC 60227-3:1997 정격전압 450/750V 이하 염화비닐절연 케이블 - 제3부 : 배선용 비닐절연전선 AC 450/750 V 이하 소재지
KS C IEC 60227-4:1997 정격전압 450/750V 이하 염화비닐절연 케이블 - 제4부 : 배선용 비닐시스 케이블 AC 450/750 V 이하 소재지
KS C IEC 60227-5:2011 정격전압 450/750V 이하 염화비닐절연 케이블 - 제5부 : 유연성 비닐 케이블(코드) AC 450/750 V 이하 소재지
KS C IEC 60227-7:2012 정격전압 450/750V 이하 염화비닐절연케이블 - 제7부 : 비닐절연 비닐시스 차폐 및 비차폐 유연성 케이블 AC 450/750 V 이하 소재지
KC 10028:2016 정격전압 450/750V 이하 고무절연 케이블 - 가교 실리콘고무절연 다심케이블 AC 450/750 V 이하 소재지
KC 60227-1:2015 정격전압 450/750V이하의 염화비닐 절연케이블 - 제1부 : 일반요구사항 AC 450/750 V 이하 소재지
KC 60227-2:2015 정격전압 450/750V이하의 염화비닐 절연케이블 - 제2부 : 시험방법 AC 450/750 V 이하 소재지
KC 60227-3:2015 정격전압 450/750V이하의 염화비닐 절연케이블 - 제3부 : 배선용 절연전선 AC 450/750 V 이하 소재지
KC 60227-4:2015 정격전압 450/750V이하의 염화비닐 절연케이블 - 제4부 : 고정배선용시스케이블 AC 450/750 V 이하 소재지
KC 60245-6:2015 정격전압 450/750V이하의 고무절연케이블 - 제6부 : 아크 용접용 케이블 AC 450/750 V 이하 소재지
KC 60245-5:2015 정격전압 450/750V이하의 고무절연케이블 - 제5부 : 고무 리프트 케이블 AC 450/750 V 이하 소재지
KC 60245-4:2015 정격전압 450/750V이하의 고무절연케이블 - 제4부 : 코드 및 가요케이블 AC 450/750 V 이하 소재지
KC 60245-3:2015 정격전압 450/750 V이하의 고무절연케이블 - 제3부 : 내열실리콘 고무절연 전선 AC 450/750 V 이하 소재지
KC 60245-2:2015 정격전압 450/750 V 이하 고무 절연 케이블 - 제 2부 : 시험방법 AC 450/750 V 이하 소재지
KC 60245-1:2015 정격전압 450/750 V 이하 고무 절연 케이블 - 제 1부 : 일반요구사항 AC 450/750 V 이하 소재지
KC 60228:2015 절연케이블용 도체 (0.5 ~ 2 500) mm² 소재지
KC 60227-7:2015 정격전압 450/750V이하의 염화비닐절연케이블 - 제 7부 : 2심 또는 다심의 차폐 및 차폐 유연성 케이블 AC 450/750 V 이하 소재지
KC 60227-6:2015 정격전압 450/750V이하의 염화비닐절연케이블 - 제 6부 : 리프트 케이블과 연결용 유연성케이블 AC 450/750 V 이하 소재지
KC 60227-5:2015 정격전압 450/750V이하의 염화비닐 절연케이블 - 제5부 : 가요케이블(코드) AC 450/750 V 이하 소재지
▶ 전기재료 및 부품
KC 60884-1:2025 가정용 및 이와 유사한 용도의 플러그와 콘센트 - 제 1부 : 일반요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60730-1:2015 가정용 및 이와 유사한 자동 제어장치 - 제 1부 : 일반요구사항 AC 450 V 이하, 30 A 이하 소재지
KC 60669-2-3:2015 가정용 및 이와 유사한 용도의 고정 전기설비용 스위치 - 제2-3부 : 개별요구사항 -시간지연스위치 AC 300 V 이하, 20 A 이하 소재지
KC 60669-2-2:2015 가정용 및 이와 유사한 용도의 고정 전기설비용 스위치 - 제 2-2부 : 개별 요구사항 - 제2절: 리모트 콘트롤 스위치 (R.C.S) AC 300 V 이하, 20 A 이하 소재지
KC 60669-2-1:2015 가정용 및 이와 유사한 용도의 고정 전기설비용 스위치 - 제2-1부 : 전자스위치 개별요구사항 AC 300 V 이하, 20 A 이하 소재지
KC 60669-1:2015 가정용 및 이와 유사한 용도의 고정 전기설비용 스위치 - 제1부 : 일반요구사항 AC 300 V 이하, 20 A 이하 소재지
KC 60384-14:2015 전자기기용 고정 커패시터 - 제 14부 : 전기자기 장해 억제 및 주전원 연결용 커패시터 AC 500 V 이하 소재지
KC 60320-2-1:2015 가정용 및 이와 유사한 용도의 기기용 커플러 - 제 2-1부 : 재봉기 커플러 AC 250 V 이하, 2.5 A 이하 소재지
KC 60320-1:2015 가정용 및 이와 유사한 용도의 기기용 커플러 - 제1부 : 일반 요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60384-1:2015 전자기기용 고정 커패시터 - 제1부 품목 규격
<제외항목>
4.8.1 유전 정접		 AC 500 V 이하 소재지
KC 60320-2-3:2015 가정용 및 유사 용도의 기기용 커플러 - 제 2-3부 : 보호등급이 IPX0 이상인 기기용 커플러 AC 250 V 이하, 16 A 이하 소재지
K 60799:2006 전기 부속품 - 코드 셋 및 접속 코드셋 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-1:2015 가정용 및 이와 유사한 용도의 플러그와 콘센트 - 제 2-1부 : 퓨즈형 플러그의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-2:2015 가정용 및 이와 유사한 용도의 플러그와 콘센트 - 제2-2부 : 기기용 콘센트의 개별 요구사항 AC 250 V 이하, 16 A 이하 소재지
K 60730-2-2:2009 가정용 및이와 유사한 자동 전기 제어장치 - 제 2-2 부 : 감열식 모터 보호장치의 개별요구사항 AC 450 V 이하, 30 A 이하 소재지
K 60730-2-6:2009 가정용 및 이와 유사한 자동 제어장치 - 제 2-6 부 : 전기 압력감지 제어장치의 개별 요구사항 AC 450 V 이하, 30 A 이하 소재지
KC 61058-1:2015 기기용 스위치 - 제1부 : 일반요구사항 AC 300 V 이하, 20 A 이하 소재지
KC 61058-2-1:2015 기기용 스위치 - 제2-1부 : 코드스위치 개별요구사항 AC 300 V 이하, 20 A 이하 소재지
KC 61058-2-4:2015 기기용 스위치 - 제2-4부 : 독립 설치형 스위치의 개별요구사항 AC 300 V 이하, 20 A 이하 소재지
KC 61058-2-5:2015 기기용 스위치 - 제2-5부 : 전환스위치 개별요구사항 AC 300 V 이하, 20 A 이하 소재지
KC 61242:2015 전기용 부속품 - 가정용 및 이와 유사한 용도의 케이블 릴 AC 250 V 이하, 16 A 이하 소재지
CEI EN 50075:1998(CEI 23-34) Non-rewirable two-pole plugs 2.5 A 250 V, with cord, for the connection of class II equipment for household and similar purposes up to AC 250 V, up to 2.5 A 소재지
CEI 23-50:2007 Plugs and socket-outlets for household and similar purposes General requirements up to AC 250 V, up to 16 A 소재지
IEC 60730-2-9:2020 Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls up to AC 450 V, up to 30 A 소재지
KS C IEC 60730-1:2020 자동제어장치 - 제1부: 일반 요구사항 AC 450 V 이하, 30 A 이하 소재지
KS C IEC 60730-2-5 Annex H:2017 자동제어장치 - 제2-5부: 전기 버너 자동제어 시스템의 개별 요구사항
- 부속서 H: 전자 제어장치에 대한 요구사항		 AC 450 V 이하, 30 A 이하 소재지
K 60730-2-11:2009 가정용 및 이와 유사한 용도의 자동전기 제어장치 - 제 2-11 부 : 에너지조절기의 개별요구사항 AC 450 V 이하, 30 A 이하 소재지
K 60730-2-10:2009 가정용 및 이와 유사한 자동 전기 제어장치 - 제 2-10 부 : 모터 기동 릴레이의 개별요구사항 AC 450 V 이하, 30 A 이하 소재지
KC 60884-2-3:2015 가정용 및 이와 유사한 용도의 플러그와 콘센트, 제2-3부 : 고정배선용 인터록이 없는 스위치형 콘센트의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-4:2015 가정용 및 이와 유사한 용도의 플러그와 콘센트 - 제 2-4부 : SELV의 플러그와 콘센트의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-5:2015 가정용 및 이와 유사한 용도의 플러그 및 콘센트 - 제 2-5부 : 어댑터의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-6:2015 가정용 및 이와 유사한 용도의 플러그 및 콘센트 - 제 2-6부 : 고정배선용 인터록 스위치형 콘센트의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60939-1:2015 전자파장해 방지용 필터소자 — 제1부 : 품목규격 AC 500 V 이하 소재지
KC 60939-2:2015 전자파장해 방지용 필터 소자 — 제2부 : 품종규격-시험방법의 선택과 일반사항 AC 500 V 이하 소재지
KC 61048:2015 램프 보조장치 형광램프 및 방전램프용 커패시터 일반 및 안전 AC 500 V 이하 소재지
K 60730-2-9:2011 가정용 및 이와 유사한 자동 제어장치 - 제 2-9부 : 온도 감지 제어장치의 개별 요구 사항 AC 450 V 이하, 30 A 이하 소재지
K 60730-2-7:2009 가정용 및 이와 유사한 용도의 자동전기 제어장치 - 제 2-7 부 : 타이머 및 타임스위치의 개별요구사항 AC 450 V 이하, 30 A 이하 소재지
IEC 60320-1:2021 Appliance couplers for household and similar general purposes - Part 1 : General requirements up to AC 250 V, up to 16 A 소재지
IEC 60320-2-1:2018 Appliance couplers for household and similar general purposes - Part 2-1 : Sewing machine couplers up to AC 250 V, up to 16 A 소재지
IEC 60384-1:2021 Fixed capacitors for use in electronic equipment - Part1 : Generic specification up to AC 500 V 소재지
IEC 60384-14:2016 Fixed capacitors for use in electronic equipment - Part 14 : Sectional specification : Fixed capacitors for electromagnetic interference suppression and connection to the supply mains up to AC 500 V 소재지
IEC 60730-1:2020 Automatic electrical controls - Part 1 : General Requirements up to AC 450 V, up to 30 A 소재지
K 60320-2-2:2006 가정용 및 이와 유사한 용도의 기기용 커플러 - 제 2-2 부 : 가정용 및 유사설비의 상호연결 커플러 AC 250 V 이하, 16 A 이하 소재지
K 10026:2013 대기전력 자동 차단 콘센트 AC 250 V 이하, 16 A 이하 소재지
IEC 61242:2015 Electrical accessories - Cable reels for household and similar purposes up to AC 250 V, up to 16 A 소재지
IEC 61058-1:2016 Switches for appliances- Part 1 : General requirements up to AC 300 V, up to 20 A 소재지
IEC 60884-2-6:1997 Plugs and socket-outlets for household and similar purposes - Part 2-6 : Particular requirements for switched socket-outlets with interlock for fixed electrical installations up to AC 250 V, up to 16 A 소재지
IEC 60884-2-5:2017 Plugs and socket-outlets for household and similar purposes - Part 2-5 : Particular requirements for adaptors up to AC 250 V, up to 16 A 소재지
IEC 60884-2-4:2007 Plugs and socket-outlets for household and similar purposes - Part 2-4 : Particular requirements for plugs and socket-outlets for SELV up to AC 250 V, up to 16 A 소재지
IEC 60884-2-3:2006 Plugs and socket-outlets for household and similar purposes - Part 2-3 : Particular requirements for switched socket-outlets without interlock for fixed installations up to AC 250 V, up to 16 A 소재지
IEC 60884-2-2:2006 Plugs and socket-outlets for household and similar purposes - Part 2-2 : Particular requirements for socket-outlets for appliances up to AC 250 V, up to 16 A 소재지
IEC 60884-2-1:2006 Plugs and socket-outlets for household and similar purposes - Part 2-1 : Particular requirements for fused plugs up to AC 250 V, up to 16 A 소재지
IEC 60884-1:2013 Plugs and socket-outlets for household and similar purposes - Part 1 : General requirements up to AC 250 V, up to 16 A 소재지
IEC 60799:2018 Electrical accessories - Cord sets and interconnection cord sets up to AC 250 V, up to 16 A 소재지
IEC 60730-1:2022 Automatic electrical controls - Part 1 : General Requirements up to AC 450 V, up to 30 A 소재지
▶ 금속 및 관련제품
ASTM F2267-24 Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression Test load : Max. 90 kN 소재지
▶ 전기재료 및 부품
IEC 60335-1:2020 Household and similar electrical appliances -Safety - Part 1 : General requirements
Annex R
Annex U		 up to AC 450 V, up to 30 A 소재지
▶ 에너지효율
기후에너지환경부 고시 제2026-137호(2026.05.27) 효율관리기자재의 운용규정
별표1의 5 전기세탁기
별표1의 28 전기스토브
별표1의 36 전기레인지
별표1의 43 의류건조기		 표준세탁용량: 2 kg 이상 ~ 25 kg 이하
정격소비전력: 500 W 이상 ~ 10 kW 이하
정격소비전력: 1 kW 이상 ~ 10 kW 이하
표준건조용량: 1 kg 이상 ~ 25 kg 이하
정격 전압: 단상 250 V 이하
정격 주파수: 60 Hz		 소재지
▶ 환경 및 신뢰성
IEC 60068-2-14:2023 Environmental testing - Part 2-14 : Tests. Test N : Change of Temperature


9. Test Nc: Rapid change of temperature, two-fluid-bath method		 High Temperature : (60 ~ 180) ℃
Low Temperature : (-85 ~ 0) ℃		 소재지
KS C IEC 60068-2-14:2023 환경 시험 - 제 2-14부 : 시험 - 시험 N : 온도 변화

<제외항목>
9. 시험 Nc: 온도의 급변(2욕조법)		 고온 : (60 ~ 180) ℃
저온 : (-85 ~ 0) ℃		 소재지
▶ 음향특성
KS I ISO 7779:2018 음향 - 정보통신기기에서 방사되는 공기 전달 소음의 측정 음압레벨, 137 dB 이하 소재지
▶ 에너지효율
KWS 1898:2023 Electrical Clothes Dryers - Energy Performance Requirements and Labeling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
KWS 1899:2023 Electrical Clothes Washing Machine - Energy and Water Performance Requirements and Labeling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
▶ 전기재료 및 부품
IEC 60669-1:2017 Switches for household and similar fixed electrical installations - Part 1: General requirements
10.1 Prevention of access to live parts
10.2 Requirements for operating parts
10.3 Requirements Accessible metal parts
10.4 Requirements for insulation of the mechanism
10.5 Requirements for insulation of the mechanism with respect to the surrounding environment
13.1 Mechanical requirements for insulating means
13.3 Fixing of covers, cover plates and actuating members
13.5 Attachment of knobs
14. Mechanism
15.1 Resistance to ageing
15.3 Resistance to humidity
16 Insulation resistance and electric strength
17.1 Temperature rise
18.1 Making breaking capacity General
18.2 Overload		 up to AC 300 V, up to 20 A 소재지
IEC 60669-2-1:2021 Switches for household and similar fixed electrical intallations - Part 2-1: Particular requirements - Electronic control devices

10.1 Prevention of access to live parts
10.2 Requirements for operating parts
10.3 Requirements Accessible metal parts
10.4 Requirements for insulation of the mechanism
10.5 Requirements for insulation of the mechanism with respect to the surrounding environment
10.101 Requirement for fuse replacement or adjustment of control setting
10.103 SELV, PELV or FELV circuits
10.104 Protection from touch current
13.1 Mechanical requirements for insulating means
13.3 Fixing of covers, cover plates and actuating members
13.5 Attachment of knobs
14. Mechanism
15.1 Resistance to ageing
15.3 Resistance to humidity
16 Insulation resistance and electric strength
17.1 Temperature rise
17.101 Looping through circuit
18.1 Making breaking capacity General
18.2 Overload
18.101 Contact mechanism for motor control circuits
19.103 Semiconductor switching devices and/or electronic regulating units incorporated in electronic switches and HBES/BACS switches
19.104 Mechanical control units incorporated in electronic switches and HBES/BACS switches
19.107 Electronic switches and HBES/BACS switches designes for heating installations
19.108 Contact mechanisms for motor contrrol circuitks
101.2 Temperature rise under abnormal conditions
101.3 Protection against electric shock after fault conditions
101.4 Short circuit in the load circuit
102.2 Fuses
102.3 Capacitors
102.4 Resistors
102.5 Automatic protective devices other than fuses
102.6 Transformers		 up to AC 300 V, up to 20 A 소재지
KC 62619:2023 산업용 리튬이차전지 안전 알카리 또는 기타 비산성 전해질을 포함하는 이차전지 셀 및 전지 - 산업용 리튬이차전지 셀 및 전지의 안전 요구사항
- 8. 전지시스템 안전(기능 안전성 검토)
- 부속서 E		 AC 450 V 이하, 30 A 이하 소재지
▶ 에너지효율
EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
EN 60456:2011 Clothes washing machines for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
EN 50229:2015 Electric Clothes Washer-Dryers For Household Use - Methods Of Measuring The Performance

10.8 Noise emission		 Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
EN 50229:2007 Electric Clothes Washer-Dryers For Household Use - Methods Of Measuring The Performance

9.5 Determination of airborne acoustical noise		 Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
AS/NZS 6400:2016 Water efficient products - Rating and labelling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
AS/NZS 2442.2:2000 Performance of household electrical appliances - Rotary clothes dryers- Part 2 : Energy labelling requirements Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
AS/NZS 2442.1:1996 Performance of household electrical appliances- Rotary clothes dryers- Part 1 : Energy Consumption and Performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
AS/NZS 2040.2:2005 Performance of household electrical appliances - Clothes washing machines- Part 2 : Energy efficiency labelling requirements Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
AS/NZS 2040.1:2005 Performance of household electrical appliances - Clothes washing machines- Part 1 : Methods for measuring performance energy and water consumption Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IEC 62301:2011 Household electrical appliances - Measurement of standby power Input Power : Max. 500 W
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IEC 62512:2012 Electric clothes washer - dryers for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IEC 61121:2012 Tumble Dryers For Household Use - Methods For Measuring The Performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IEC 61121:2002+AMD1:2005 Tumble dryers for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
EN 61121:2005 Tumble dryers for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
EN 61121:2013 Tumble dryers for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
MS IEC 60456:2012 Clothes Washing machines for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
RTE INEN 124:2014 Energy efficiency and labeling of washer dryer machine Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
RTE INEN 111:2014 Energy efficiency and labeling of clothes dryers Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
RTE INEN 111:2013 Energy efficiency and labeling of clothes dryers Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
RTE INEN 077:2013 Energy efficiency clothes washers household electric. limits test method and labeling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
Resolution 41012 of 2015 RETIQ TECHNICAL LABELING REGULATIONS Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
NTE INEN 2659:2013 Appliances and similar. Clothes washing machine. Test methods for energy Consumption Water consumption and volumetric capacity. Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
NTC 5913:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES. ELECTRIC WASHING MACHINES. TEST METHODS FOR ENERGY CONSUMPTION, WATER CONSUMPTION AND VOLUME CAPACITY Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
NMX-J-585-ANCE-2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES-TEST METHODS FOR ENERGY PERFORMANCE, WATER CONSUMPTION, AND CAPACITY OF HOUSEHOLD CLOTHES WASHERS Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SANS 50229:2010 Electric Clothes Washer-Dryers For Household Use - Methods Of Measuring The Performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SANS 61121:2015 Tumble Dryers For Household Use - Methods for Measuring The Performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SASO 2683:2007 Clothes washing machines for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SASO 2692:2013 Energy Labelling Requirement of Clothes Washing Machines for Household Use Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SASO 2693:2007 Method for Measuring the Performance of Clothes Washing for Household Use Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SASO 2883:2017 Electrical Clothes Dryers - Energy Performance Requirements and Labelling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
SASO 2885:2018 Electrical Clothes Washing Machines - Energy and Water Performance Requirements and Labelling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
TCVN 8526:2013 Electric washing machine - Minimum energy performance and method for determination of energy efficiency Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
UAE.S 5010 2:2013 Labeling- Energy efficiency label for electrical appliances Part 2 : Washing machines and dryers Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
DECRETO SUPREMO Nº 009-2017-em_ANEXO 6 Lavadoras On labeling of energy efficiency for washing machines deomestic use clothes Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
NOM-005-ENER:2012 Energy efficiency of household washing machines. Limits, test method and labelling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
NOM-005-ENER:2016 Energy efficiency of household washing machines. Limits, test method and labelling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
NMX-J-585-ANCE-2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES-TEST METHODS FOR ENERGY PERFORMANCE, WATER CONSUMPTION, AND CAPACITY OF HOUSEHOLD CLOTHES WASHERS Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
KS C IEC 60456:2015 가정용 전기세탁기의 성능 측정방법 표준세탁용량 : 2 kg ~ 25 kg
정격 전압 : 단상 250 V 이하
정격 주파수 : 60 Hz		 소재지
KS C 9608:2013 전기 세탁기 표준세탁용량 : 2 kg ~ 25 kg
정격 전압 : 단상 250 V 이하
정격 주파수 : 60 Hz		 소재지
IEC 60456:2003 Clothes washing machines for household use Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IEC 60456:2010+AMD1:2022 Clothes washing machines for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
OS 1651/2022 Electrical Clothes Washing Machines - Energy and Water Performance Requirements and Consumption Efficiency Labeling Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50 Hz		 소재지
Portaria INMETRO
No.121/2022		 Portaria INMETRO
No.121/2022 (ANEXO B-ENSAIOS DE DESEMPENHO-METODOLOGIA)		 Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
▶ 환경 및 신뢰성
RTCA DO-160G:2010 Environmental Conditions and Test Procedures for Airborne Equipment
Section 4 Temperature and Altitude
  4.5.1 Ground Survival Low Temperature Test and Short-Time operating Low temperature Test
  4.5.2 Operating Low Temperature Test
  4.5.3 Ground Survival High Temperature Test and Short-Time operating High temperature Test
  4.5.4 Operating High Temperature Test
  4.5.5 In-Flight Loss of Cooling Test
  4.6.1 Altitude Test
Section 5 Temperature Variation
Section 6 Humidity
Section 7 Operational shocks and Crash Safety
  7.2 Operational Shock
Section 8 Vibration		 Altitude Range: (0  ~  21) km
Maximum Operating Temperature : 200 ℃ Minimum Operating Temperature : -60 ℃
High Temperature : (60 ~ 180) ℃
Low Temperature : (-75 ~ 0) ℃
Temperature Range : (-75 ~ 200) ℃
Humidity Range : (10 ~ 95) % R.H.
Frequency Range : 5 Hz ~ 2.5 kHz Peak Amplitude : 25.4 ㎜(p-p)
Peak Acceleration : 300 m/s²
Shock Waveform : Sawtooth Pulse
Peak Acceleration : 400 m/s²
Maximum Pulse Duration : 20 ms		 소재지
MIL-STD-810G:(w/Change 1):2014 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500 Low Pressure (Altitude)
  Procedure I - Storage/Air transport
  Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
507 Humidity
514 Vibration

  Category 4 - Truck/Trailer - Secured Cargo
  Category 5 - Truck/trailer - loose cargo
516 Shock
  Procedure I - Functional Shock
  Procedure II - Transportation Shock
  Procedure III - Fragility
  Procedure V - Crash hazard		 Altitude Range : (0  ~  21) km
Maximum Operating Temperature : 200 ℃ Minimum Operating Temperature : -60 ℃
High Temperature : (60 ~ 180) ℃
Low Temperature : (-75 ~ 0) ℃
Temperature Range : (-75 ~ 200) ℃
Humidity Range : (10 ~ 95) % R.H.
Frequency Range : 5 Hz ~ 2.5 kHz Peak Amplitude : 42 ㎜(p-p)
Peak Acceleration : 300 m/s²
Shock Waveform : Sawtooth Pulse
Peak Acceleration : 400 m/s²
Maximum Pulse Duration : 20 ms		 소재지
MIL-STD-810G:2008 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500 Low Pressure (Altitude)
  Procedure I - Storage/Air transport
  Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
507 Humidity
514 Vibration

  Category 4 - Truck/Trailer - Secured Cargo
  Category 5 - Truck/trailer - loose cargo
516 Shock
  Procedure I - Functional Shock
  Procedure II - Transportation Shock
  Procedure III - Fragility
  Procedure V - Crash hazard		 Altitude Range : (0  ~  21) km
Maximum Operating Temperature : 200 ℃
Minimum Operating Temperature : -60 ℃
High Temperature : (60 ~ 180) ℃
Low Temperature : (-75 ~ 0) ℃
Temperature Range : (-75 ~ 200) ℃
Humidity Range : (10 ~ 95) % R.H.
Frequency Range : 5 Hz ~ 2.5 kHz
Peak Amplitude : 59.4 ㎜(p-p)
Peak Acceleration : 300 m/s²
Shock Waveform : Sawtooth Pulse
Peak Acceleration : 400 m/s²
Maximum Pulse Duration : 20 ms		 소재지
IEC 60068-2-64:2008+AMD1:2019 Environmental testing - Part 2-64 : Test - Test Fh : Vibration, broad-band random and guidance Frequency Range : 5 Hz ~ 2.5 kHz
Maximum Acceleration : 300 m/s²		 소재지
IEC 60068-2-38:2021 Environmental testing - Part 2 : Tests. Test Z/AD : Composite Temperature/humidity cyclic test Temperature range : (10 ~ 90) ℃
Humidity range : (20 ~ 95) % R.H.		 소재지
MIL-STD-810H:2019 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500 Low Pressure (Altitude)
  Procedure I - Storage/Air transport
  Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
507 Humidity
514 Vibration

Category 4 - Truck/Trailer - Secured Cargo
Category 5 - Truck/trailer - loose cargo
516 Shock
  Procedure I - Functional Shock
  Procedure II - Transportation Shock
  Procedure III - Fragility		 Altitude Range : (0  ~  21) km
Maximum Operating Temperature : 200 ℃
Minimum Operating Temperature : -70 ℃
High Temperature : (60 ~ 180) ℃
Low Temperature : (-70 ~ 0) ℃
Temperature Range : (-70 ~ 200) ℃
Humidity Range : (10 ~ 95) % R.H.
Frequency Range : 5 Hz ~ 2.5 kHz
Peak Amplitude : 42 ㎜(p-p)
Peak Acceleration : 300 m/s²
Shock Waveform : Sawtooth Pulse
Peak Acceleration : 400 m/s²
Maximum Pulse Duration : 20 ms		 소재지
MIL-STD-167-1A:2005 DEPARTMENT OF DEFENSE TEST METHOD STANDARD: MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE I-ENVIRONMENTAL AND TYPE II-INTERNALLY EXCITED)

Type I - environmental vibration		 Frequency Range : (4 ~ 33) Hz
Peak Amplitude : (2.54 ± 0.254) ㎜		 소재지
MIL-STD-810F:2000 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
500 Low Pressure (Altitude)
  Procedure I - Storage/Air transport
  Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
507 Humidity
514 Vibration

Category 4 - Truck/trailer/tracked - restrained cargo
Category 5 - Truck/trailer/tracked - loose cargo
516 Shock
Procedure I - Functional Shock
Procedure II - Materiel to be packaged
Procedure III - Fragility		 Altitude Range : (0  ~  21) km
Maximum Operating Temperature : 200 ℃
Minimum Operating Temperature : -70 ℃
High Temperature : (60 ~ 180) ℃
Low Temperature : (-70 ~ 0) ℃
Temperature Range : (-70 ~ 200) ℃
Humidity Range : (10 ~ 95) % R.H.
Frequency Range : 5 Hz ~ 2.5 kHz
Peak Amplitude : 59.2 ㎜(p-p)
Peak Acceleration : 300 m/s²
Shock Waveform : Sawtooth Pulse
Peak Acceleration : 400 m/s²
Maximum Pulse Duration : 20 ms		 소재지
KS C IEC 60068-2-1:2007 환경 시험 - 제 2-1부 : 시험 - 시험 A : 내한성 시험
<제외항목>
열분산 시편의 시험. Ad 및 Ae		 최저온도 : -60 ℃ 소재지
KS C IEC 60068-2-2:2007 환경 시험 - 제 2-2부 : 시험 - 시험 B : 내열성 시험
<제외항목>
열분산 시편의 시험. Bd 및 Be		 최고온도 : 200 ℃ 소재지
KS C IEC 60068-2-6:2007 환경 시험 - 제 2-6부 : 시험 - 시험 Fc : 진동(정현파) 주파수범위 : 5 Hz ~ 2.6 kHz
최대진폭 : 3 mm(p-p)
최대가속도 : 300 m/s²		 소재지
KS C IEC 60068-2-13:2021 환경 시험 - 제 2-13부 : 시험 - 시험 M : 저기압 고도 : (0 ~ 21) km 소재지
KS C IEC 60068-2-30:2005 환경시험 - 제2-30부: 시험 - 시험 Db와 지침: 주기적 내습 (12 h + 12 h 주기) 온도범위:(10 ~ 90) ℃
습도범위:(20 ~ 95) % R.H.		 소재지
KS C IEC 60068-2-38:2021 환경 시험 - 제 2-38부 : 시험 - 시험 Z/AD: 합성 온도/습도 사이클 시험 온도범위 : (10 ~ 90) ℃
습도범위 : (20 ~ 95) % R.H.		 소재지
KS C IEC 60068-2-64:2019 환경 시험 - 제 2-64부 : 시험 - 시험 Fh: 광대역 랜덤 진동 시험 및 지침 주파수범위 : 5 Hz ~ 2.5 kHz
최대진폭 : 100 mm(p-p)
최대가속도 : 300 m/s²		 소재지
KS C IEC 60068-2-78:2012 환경시험 - 제2-78부: 시험 - 시험 Cab: 안정 상태의 내습성 시험 온도범위:(10 ~ 90) ℃
습도범위:(20 ~ 95) % R.H.		 소재지
IEC 60068-2-1:2025 Environmental testing - Part 2-1 : Tests. Tests A : Cold

Testing of heat-dissipating specimens, Ad and Ae		 Temperature(Min) : -60 ℃ 소재지
IEC 60068-2-2:2025 Environmental testing - Part 2-2 : Tests. Tests B : Dry heat

Testing of heat-dissipating specimens, Bd and Be		 Temperature(Max) : 200 ℃ 소재지
IEC 60068-2-6:2007 Environmental testing - Part 2 : Tests - Test Fc : Vibration (sinusoidal) Frequency Range : 5 Hz ~ 2.5 kHz
Maximum Amplitude : 3 mm(p-p)
Maximum Acceleration : 300 m/s²		 소재지
IEC 60068-2-13:2021 Environmental testing - Part 2-13 : Tests - Test M : Low air pressure Altitude : (0 ~ 21) km 소재지
▶ 온도 및 습도
JTM K 09:2023 온습도 시험조 - 성능 시험 방법 및 성능 표시 방법
5.5.3 온도 변동, 공간 온도 편차
 5.5.4 습도 변동
 5.5.6 공간 습도 편차		 습도 : (5 ~ 98) % R.H.
온도 : (-70 ~ 200) ℃		 소재지
JTM K 07:2022 온도 시험조 - 성능 시험 방법 및 성능 표시 방법
 4.5.2 온도 변동
 4.5.4 공간 온도 편차		 온도 (-70 ~ 315) ℃ 소재지
KS B 4003:1990 금속 열처리용 가열 설비의 유효 가열대 시험 방법 Max. 1 500 ℃ 소재지
▶ 음향특성
ISO 1996-1:2016 Acoustics - Description, measurement and assessment of environmental noise  - Part 1 : Basic quantities and assessment procedures Sound pressure level, below 137 dB 소재지
ISO 3382-2:2008 Acoustics - Measurement of room acoustic parameters - Part 2 : Reverberation time in ordinary rooms octave bands with centre frequencies (125 ~ 4 000) Hz
one-third octave bands with centre frequencies (100 ~ 5 000) Hz		 소재지
ISO 3741:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms Sound pressure level, below 137 dB 소재지
ISO 3745:2012 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms Sound pressure level, below 137 dB 소재지
ISO 10140-2:2021 Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation one-third octave bands with centre frequencies (100 ~ 5 000) Hz 소재지
ISO 10847:1997 Acoustics - In-situ determination of insertion loss of outdoor noise barriers of all types octave bands with centre frequencies (63 ~ 4 000) Hz
one-third octave bands with centre frequencies (50 ~ 10 000) Hz		 소재지
ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections Sound pressure level, below 137 dB 소재지
ISO 11203:1995 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level Sound pressure level, below 137 dB 소재지
ISO 3382-1:2009 Acoustics - Measurement of room acoustic parameters - Part 1 : Performance spaces octave bands with centre frequencies(125 ~ 4 000) Hz
one-third octave bands with centre frequencies (100 ~ 5 000) Hz		 소재지
ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room one-third octave bands with centre frequencies (100 ~ 5 000) Hz 소재지
KS F 10140-2:2021 음향 - 건물 부재의 차음 성능 시험실 측정 방법 - 제2부: 공기 전달음 차단 성능 측정방법 1/3 옥타브밴드 중심 주파수 (100 ~ 5 000) Hz 소재지
KS F 2864:2012 실내 공간의 잔향시간과 음향변수 측정방법 1/1 옥타브밴드 중심 주파수 (125 ~ 4 000) Hz
1/3 옥타브밴드 중심 주파수 (100 ~ 5 000) Hz		 소재지
KS I ISO 3744:2010 음향 - 음압을 사용한 소음원의 음향파워레벨과 음향에너지레벨 결정 - 반사면 위 준자유음장에서의 공학적 방법 음압레벨, 137 dB 이하 소재지
ISO 3744:2010 Acoustics - Determenation of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane Sound pressure level, below 137 dB 소재지
KS F 2805:2014 잔향실법 흡음 성능 측정방법 1/3 옥타브밴드 중심 주파수 (100 ~ 5 000) Hz 소재지
KS F ISO 16283-2:2020 음향 - 건물 및 건물 부재의 차음 성능 현장 측정 방법 - 제2부: 바닥 충격음 차단 성능 태핑머신 충격음 : 1/3 옥타브밴드 중심 주파수 (50 ~ 5 000) Hz
고무공 충격음 : 1/3 옥타브밴드 중심 주파수 (50 ~ 630) Hz		 소재지
KS F ISO 16283-1:2014 음향 - 건물 및 건물 부재의 차음 성능 현장 측정 방법 - 제1부: 공기 전달음 차단 성능 1/3 옥타브밴드 중심 주파수 (100 ~ 3 150) Hz 소재지
MIL-STD-740-1(SH):1986 AIRBORNE SOUND MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT 음압레벨, 137 dB 이하 소재지
KS I ISO 11202:2010 음향 - 기계와 장비의 방사소음 - 근사 환경보정을 적용하여 작업위치와 다른 지정위치에서의 방사음압레벨 결정 음압레벨, 137 dB 이하 소재지
KS I ISO 10847:1997 음향 - 방음벽 삽입손실의 현장 결정 1/1 옥타브밴드 중심 주파수 (63 ~ 4 000) Hz
1/3 옥타브밴드 중심 주파수 (50 ~ 10 000) Hz		 소재지
KS I ISO 9614-2:1996 음향 - 소리세기를 이용한 소음원의 음향파워레벨 결정 - 제2부: 스캐닝 측정 음압레벨, 162 dB 이하 소재지
KS I ISO 3745:2012 음향 - 음압법에 의한 소음원의 음향 파워레벨과 음향 에너지레벨 측정방법 - 무향실과 반무향실의 정밀 측정방법 음압레벨, 137 dB 이하 소재지
KS F 2863-2:2025 건물 및 건물 부재의 바닥 충격음 차단 성능 평가 방법 - 제2부: 중량 충격원에 대한 차단 성능 1/1 옥타브밴드 중심 주파수 (63 ~ 2 000) Hz 소재지
KS F 2863-1:2017 건물 및 건물 부재의 바닥 충격음 차단 성능 평가 방법 - 제1부: 표준 경량 충격원에 대한 차단 성능 1/3 옥타브밴드 중심 주파수 (100 ~ 3 150) Hz 소재지
KS I ISO 3741:2010 음향 - 음압법에 의한 소음원의 음향파워레벨과 음향에너지레벨 측정방법 - 잔향실에서의 정밀 측정 방법 음압레벨, 137 dB 이하 소재지
KS F 2862:2017 건물 및 건물 부재의 공기 전달음 차단 성능 평가 방법 1/1 옥타브밴드 중심 주파수 (125 ~ 2 000) Hz
1/3 옥타브밴드 중심 주파수 (100 ~ 3 150) Hz		 소재지
KS F 2809:2011 공기 전달음 차단 성능 현장 측정 방법 1/1 옥타브밴드 중심 주파수 (125 ~ 2 000) Hz
1/3 옥타브밴드 중심 주파수 (100 ~ 3 150) Hz		 소재지
KS I ISO 1996-1:2016 음향 - 환경 소음의 표현, 측정 및 평가 방법 - 제1부 : 기본 양 및 평가절차 음압레벨, 137 dB 이하 소재지
KS F ISO 717-2:2020 음향 - 건물 및 건물 부재의 차음 성능 평가 방법 - 제2부: 바닥 충격음 차단 성능 경량 충격음: 1/3 옥타브밴드(100 ~ 3 150) Hz
고무공 충격음 : 1/3 옥타브밴드(50 ~630) Hz		 소재지
IEC 60704-1:2021 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - Part 1:General requirements

ISO 3744:2010		 Sound pressure level, below 137 dB 소재지
IEC 60704-2-1:2000 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - Part 2-1:Particular requirements for vacuum cleaners

ISO 3744:2010		 Sound pressure level, below 137 dB 소재지
▶ 실내 및 기타환경
ISO/IEC 28360-2:2018 Information technology - Office equipment - Determination of chemical emission rates from electronic equipment - Part 2: Not using-consumables (0.001 ~ 500) mg/h
[O₃] > 0.6 mg/h		 소재지-1
ISO/IEC 28360-1:2021 Information technology - Determination of chemical emission rates from electronic equipment - Part 1: Using-consumables (0.001 ~ 500) mg/h
[O₃] > 0.6 mg/h
[PM] > 0.5 mg/h		 소재지-1
KS I 2007:2022 가구 및 건축자재의 폼알데하이드 및 휘발성 유기화합물 방출량 측정방법 - 대형챔버법 (0.001 ~ 500) mg/h 소재지-1
KS I 3546:2022 건축자재의 휘발성 유기화합물 및 알데하이드 저감성능 시험방법 - 고상 건축자재 (1 ~ 2 000) μg/m³ 소재지-1
KS I 3547:2022 건축자재의 휘발성 유기화합물 및 알데하이드 저감성능 시험방법 - 액상 건축자재 (1 ~ 2 000) μg/m³ 소재지-1
KS I ISO 16000-1:2004 실내공기 - 제 1부 : 시료채취 방법의 일반적 관점 - 소재지-1
KS I ISO 16000-2:2004 실내공기 - 제 2부 : 폼알데하이드 시료채취 방법 - 소재지-1
KS I ISO 16000-3:2022 실내공기 - 제 3부 : 실내공기와 시험 챔버 공기 중 폼알데하이드와 그 외의 카보닐 화합물 측정 - 액티브 채취 방법 (0.01 ~ 5 000) μg/m³ 소재지-1
KS I ISO 16000-6:2011 실내공기 - 제 6부 : 흡착제 Tenax TA®를 이용한 액티브 시료채취 열 탈착 및 MS 또는 MS/FID를 이용한 가스 크로마토그래피에 의한 실내 및 시험 챔버 공기 중 휘발성 유기화합물 측정 (0.01 ~ 300 000) μg/m³ 소재지-1
KS I ISO 16000-9:2024 실내공기 - 제 9부 : 건축제품 및 가구의 휘발성 유기화합물 방출 측정법 - 방출 시험 챔버법 (0.000 5 ~ 20) mg/(㎡ㆍh) 소재지-1
KS I ISO 16000-11:2024 실내공기 - 제 11부 : 건축 자재 및 가구의 휘발성 유기화합물의 방출 측정법 - 시료채취 보관 및 시험편 제작 - 소재지-1
KS M 1998:2022 건축 내장재등의 폼알데하이드 및 휘발성 유기화합물 방출량 측정 (0.000 5 ~ 20) mg/(㎡ㆍh) 소재지-1
ISO 12219-2:2012 Interior air of road vehicles - Part 2 : Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Bag method (0.01 ~ 300 000) μg 소재지-1
ISO 12219-4:2013 Interior air of road vehicles - Part 4 : Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method (0.01 ~ 300 000) μg/m³ 소재지-1
ISO 16000-23:2018 Indoor air - Part 23 : Performance test for evaluating the reduction of formaldehyde and other carbonyl compounds concentrations by sorptive building materials (1 ~ 2 000) μg/m³ 소재지-1
ISO 16000-24:2018 Indoor air - Part 24 : Performance test for evaluating the reduction of volatile organic compound concentrations by sorptive building materials (1 ~ 2 000) μg/m³ 소재지-1
ISO 24353:2008+AMD 1:2021 Hygrothermal performance of building materials and products - Determination of moisture adsorption/desorption properties in response to humidity variation (0 ~ 400) g/㎡ 소재지-1
국립환경과학원 고시 제2022-37호(2022.7.25.) 잔류성유기오염물질공정시험기준
- ES 10902.1b 배출가스 시료 중 비의도적 잔류성유기오염물질 (UPOPs) 동시시험기준 - HRGC/HRMS		 1 pg/m³ 이상 소재지-1
국립환경과학원 고시 제2025-46호 (2025.11.17) 실내공기질공정시험기준
- ES 02131.1h 건축자재 방출 휘발성유기화합물 및 폼알데하이드 시험방법 - 소형방출시험챔버법
- ES 02601.1e 실내 및 건축자재에서 방출되는 폼알데하이드 측정방법 - 2,4 DNPH 카트리지와 액체크로마토그래프법
- ES 02602.1f 실내 및 건축자재에서 방출되는 휘발성 유기화합물 측정방법 - 고체흡착관과 기체 크로마토그래프 - 질량분석법 또는 불꽃이온화검출법		 (0.000 5 ~ 20) mg/(㎡ㆍh)

(0.01 ~ 5 000) μg/m³

(0.01 ~ 300 000) μg/m³		 소재지-1
국립환경과학원 고시 제2025-57호 (2025.12.26.) 대기오염공정시험기준
- ES 01801.1 환경대기 중 벤조(a)피렌 시험방법 - 가스크로마토그래피법
- ES 01802.1a 환경대기 중 다환방향족탄화수소류(PAHs) - 기체크로마토그래피/질량분석법		 (0.1 ~ 10) ng/m³

(0.1 ~ 200) ng/m³		 소재지-1
KS F 2611:2024 건축재료의 흡·방습성 시험방법 - 습도 응답법 (0 ~ 400) g/㎡ 소재지-1
KS X ISO/IEC 28360-1:2018 정보기술 - 사무기기 - 전자기기의 화학물질 방출량 측정방법 - 제1부 : 소모품을 사용하는 제품 (0.001 ~ 500) mg/h
[O₃] > 0.6 mg/h
[PM] > 0.5 mg/h		 소재지-1
KS X ISO/IEC 28360-2:2018 정보기술 - 사무기기 - 전자기기의 화학물질 방출량 측정방법 - 제2부 : 소모품을 사용하지 않는 제품 (0.001 ~ 500) mg/h
[O₃] > 0.6 mg/h		 소재지-1
▶ 전기재료 및 부품
KS C IEC 62133-2:2021 알칼리 또는 기타 비산성 전해질을 포함하는 이차전지 셀 및 전지 - 휴대기기용 밀폐 이차전지 셀 및 이로 구성된 전지의 안전 요구사항 - 제2부: 리튬 시스템 Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ∼ 160) ℃		 소재지-1
KC 62133-2:2020 휴대기기용 밀폐 리튬이차전지 안전 Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ~ 160) ℃		 소재지-1
IEC 62133-2:2017+AMD1:2021 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary lithium cells, and for batteries made from them, for use in portable applications - Part 2: Lithium systems Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ~ 160) ℃		 소재지-1
KC 62133:2019 휴대기기용 밀폐 2차 전지 안전 Max. DC 100 V
Max. DC 100 A		 소재지-1
▶ 산업용 전기기기
GS-6110-0059:2022 345kV 송전선로 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
KS C IEC 60079-31:2013 폭발성 분위기 - 제31부: 용기 "t"에 의한 기기의 분진 점화 보호
<현장시험>
6.1.1.3 Pressure test
6.1.2 Tests to determine maximum surface temperature		 15 600 V 이하
2 000 A 이하
표면온도: (-60 ~ +500) ℃
<현장시험>
표면온도: (-60 ~ +500) ℃		 소재지-1
ES-5945-0004:2026 저전압계전기
<제외항목>
7.3.(7)절: EMC 시험
7.3.(8)절: 제어전원이상시험
7.3.(9)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0045:2005 345kV 송전선로 보호배전반(디지털방향비교, PCM전류차동방식)
<제외항목>
6.2.2.(11)절 ~ 6.2.2.(18)절		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0039:2022 154kV 송전선로 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0034:2022 저주파수계전기 트립 제어장치
<제외항목>
5.2.(6)절: EMC 시험
5.2.(7)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0033:2022 345kV 모선 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0030:2022 345kV 변압기 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-5945-0031:2024 재폐로부 방향성 과전류계전기
<제외항목>
6.5.7절: EMC 시험
6.5.8절: 제어전원 이상 시험
6.5.9절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-5945-0030:2013 디지털 ILC반 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-5945-0017:2010 과전류계전기(96P 오동작 방지용)
<제외항목>
6.2.10절 ~ 6.2.17절		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-5945-0016:2022 디지털 저주파수계전기
<제외항목>
5.4.7절: EMC 시험
5.4.8절: 제어전원 이상 시험
5.4.9절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-5945-0015:2022 디지털 전류비율차동 계전기
<제외항목>
6.4.10절 ~ 6.4.17절
6.4.20절		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0009:2008 재폐로계전기 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0050:2019 저주파수계전기 보호배전반 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0046:2022 345kV 이하 차단기 동작실패 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0003:2026 과전압 계전기
<제외항목>
6.4.7절: EMC 시험
6.4.8절: 제어전원 이상 시험
6.4.9절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0002:2022 재폐로부 과전류 계전기
<제외항목>
6.5.7절: EMC 시험
6.5.8절: 제어전원 이상 시험
6.5.9절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0001:2022 과전류 계전기
<제외항목>
6.5.7절: EMC 시험
6.5.8절: 제어전원 이상 시험
6.5.9절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ISO 20653:2023 Road vehicles - Degrees of protection (IP code) - Protection of electrical equipment against foreign objects, water and access

IPX4K, IPX6K		 IP1X - IP6XK,
IPX1 - IPX9K

IPX4K, IPX6K		 소재지-1
ES-5945-0005:2022 역상전류 계전기
<제외항목>
7.4.6절
7.4.7절
7.4.10절~ 7.4.17절
7.4.19절		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0006:2022 방향성 과전류계전기
<제외항목>
6.5.7절: EMC 시험
6.5.8절: 제어전원 이상 시험
6.5.9절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0007:2008 선택지락 계전기 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
ES-5945-0008:2022 전류비율차동계전기
<제외항목>
5.6절: 고조파 저지특성시험
5.8절: 내진시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
IEC 60745-2-2:2008 Hand-held motor-operated electric tools - Safety - Part 2-2 : Particular requirements for screwdrivers and impact wrenches single phase : 250 V or less
three phase : 440 V or less		 소재지-1
KC 60745-2-9:2015 수지형 전동공구의 안전성 - 제2-9부 : 전기태퍼의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-13:2015 수지형 전동공구의 안전성 - 제2-13부 : 전기체인톱의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-17:2015 수지형 전동공구의 안전성 - 제2-17부 : 전기 라우터 및 트리머에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-16:2015 수지형 전동공구의 안전성 - 제2-16부 : 태커에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-15:2015 수지형 전동공구의 안전성 - 제2-15부 : 가지치기 및 제초기에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
IEC TS 60079-46:2017 Explosive atmospheres - Part 46: Equipment assemblies Surface Temp.: (-60 ~ +500) ℃ 소재지-1
IEC 62053-11:2003 Electricity metering equipment(a.c.) - Particular requirements - Part 11 : Electro mechanical meters for active energy (classes 0.5 1 and 2)
- 5. Resistance to heat and fire, Protection against penetration of dust and water		 AC 600 V or less 소재지-1
IEC 60079-18:2014+AMD1:2017 Explosive atmospheres - Part 18 : Equipment protection by encapsulation “m”

8.2.4 Dielectric strength test		 Max. 15 000 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃

Max. 15 600 V		 소재지-1
IEC 60079-15:2017 Explosive atmospheres - Part 15 : Equipment protection by type of protection “n”

6.2 Electric strength insulation from earth or frame
11.2.2 Voltage test
11.3.2 Equipment where the volume of the enclosure will be unchanged due to pressure
11.3.3 Alternative type test for equipment where the volume of the enclosure changes due to pressure		 Max. 15 000 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃

Max. 15 600 V		 소재지-1
IEC 60079-11:2011 Explosive atmospheres - Part 11 : Equipment protection by intrinsic safety “i”

10.3 Dielectric strength tests		 Max. 15 600 V, Max. 900 A,
Surface Temp.: (-60 ~ +1 000) ℃

Max. 15 600 V		 소재지-1
IEC 60079-7:2015+AMD1:2017 Explosive atmospheres - Part 7 : Equipment protection by increased safety “e”

6.2 Rotating electrical machines
Annex A Temperature determination of electrical machines

6.1 Dielectric strength
6.8.2 Maximum dissipated power method
6.8.3 Defined arrangement method		 Max. 13 640 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃

Max. 13 640 V ,Max. 2 000 A,
Surface Temp : (-60 ~ +500) ℃		 소재지-1
IEC 60079-6:2015 Explosive atmospheres - Part 6 : Equipment protection by liquid immersion “o”

6.1.3 Overpressure test on unsealed enclosures
6.1.4 Maximum temperature		 Max. 13 640 V, Max. 2 000 A,
Max. Overpressure: 1 MPa,
Surface Temp.: (-60 ~ +500) ℃

Max. Overpressure: 150 kPa,
Surface Temp.: (-60 ~ +500) ℃		 소재지-1
IEC 60079-5:2015+AMD1:2022 Explosive atmospheres - Part 5 : Equipment protection by powder filling “q”

5.1.3 Dielectric strength test of the filling material
5.1.4 Maximum temperatures		 Max. 1 000 V, Max. 16 A,
Max. Overpressure: 1 MPa,
Surface Temp.: (-60 ~ +500) ℃

Max. 1 000 V
Surface Temp.: (-60 ~ +500) ℃		 소재지-1
IEC 60079-2:2014 Explosive atmospheres - Part 2 : Equipment protection by pressurized enclosure “p”

16.1 Determining the maximum overpressure rating
16.2 Maximum overpressure test
16.3 Leakage test
16.4 Purging test for pressurized enclosures with no internal source of release and filling procedure test for sratic pressurization
16.5 Purging and dilution tests for a pressurized enclosure with an internal source of release
16.6 Verification of minimum overpressure
16.7.1 Overpressure test
16.8 Overpressure test for a containment system with a limited release		 Max. 13 640 V, Max. 2 000 A,
Max. Pressure: 15 kPa,
Max. Flow Rate: 300 LPM,
Surface Temp.: (-60 ~ +500) ℃

Max. Pressure: 15 kPa,
Max. Flow Rate: 300 LPM,
Surface Temp.: (-60 ~ +500) ℃		 소재지-1
IEC 60079-1:2014 Explosive atmospheres - Part 1 : Equipment protection by flameproof enclosures “d”

15.2.3 Overpressure test		 Max. 13 640 V, Max. 2 000 A,
Max. Overpressure: 10 MPa,
Surface Temp.: (-60 ~ +500) ℃

Max. Overpressure: 10 MPa		 소재지-1
IEC 60079-0:2017 Explosive atmosphere - Part 0 : Equipment-General requirements

26.11 Resistance to chemical agents for Group I electrical apparatus

26.4.2 Resistance to impact
26.4.3 Drop test
26.5.1 Temperture measurement
26.6 Torque test for bushings
26.13 Surface resistance test of parts of enclosures of non-metallic materials		 Max. 15 600 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +1 000) ℃

Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
KS C IEC 62053-23:2005 전기계량 장치 - 특수 요구 사항 - 제23부 : 전자식 무효 전력량계 (2급 및 3급)
- 5. 열과 불에 대한 저항, 먼지나 물의 침투로부터 보호		 AC 600 V 이하 소재지-1
KS C IEC 62053-22:2003 전자식유효 전력량계 (0.2급 및 0.5급)
- 5.2.4. 열과 불에 대한 내력 시험
- 5.2.5. 먼지와 물의 침투에 대한 보호시험		 AC 600 V 이하 소재지-1
KS C IEC 62053-21:2003 전자식유효 전력량계 (1급 및 2급)
- 5.2.4. 열과 불에 대한 내력 시험
- 5.2.5. 먼지와 물의 침투에 대한 보호시험		 AC 600 V 이하 소재지-1
KC 60745-2-8:2015 수지형 전동공구의 안전성
- 제2-8부 : 전기가위 및 나블러의 개별 요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-14:2015 수지형 전동공구의 안전성
- 제2-14부 : 전기 대패에 대한 개별 요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
GS-6350-0016:2020 IEC 61850 기반 전력구 운영시스템
<제외항목>
8.3.4절: 환경시험
8.3.5절: EMC 시험		 IEC 61850 적합성 시험툴(SW version 1.0)

Network Device		 소재지-1
GS-6110-0239:2022 154kV 모선 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0096:2017 OLTC 보호계전기
<제외항목>
4.2.5절: 진동 및 충격시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0084:2022 154kV Sh.C Bank 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0083:2022 765kV 모선 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0082:2022 765kV 차단기 동작실패 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0081:2022 765kV 변압기 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0080:2022 765kV 송전선로 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0078:2023 고장파급 방지장치반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0074:2022 154kV 변압기 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0073:2022 154kV 고객 송전선로 보호배전반(과전류방식)
<제외항목>
6.2.2.(8)절 ~ 6.2.2.(15)절
6.2.2.(23)절		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0072:2022 154kV 고객 송전선로 보호배전반(방향성 과전류방식)
<제외항목>
6.2.2.(8)절 ~ 6.2.2.(15)절
6.2.2.(23)절		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0070:2022 154kV 단거리 송전선로 보호배전반
<제외항목>
6.2.2.(6)절: EMC 시험
6.2.2.(7)절: 제어전원 이상 시험
6.2.2.(8)절: 환경시험		 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
GS-6110-0063:2007 송전선보호반 (방향성 과전류 - 디지털형) 제어전원 정격: DC 300 V 이하
CT 정격: 500 A 이하
PT 정격: AC 300 V 이하		 소재지-1
IEC 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
<현장시험>
6.4.3 Overpressure test
6.4.4 Purging test
6.4.5 Minimum pressure differential test
7.1.3 Minimum flow rate
7.5.3 Purging test
7.5.4 Minimum ventilation flow rate test		 표면온도: (-60 ~ +500) ℃
최대압력: 15 kPa
최대유량: 300 LPM
<현장시험>
최대압력 : 15 kPa,
최대유량 : 300 LPM		 소재지-1
KC 60745-1:2015 수지형 전동공구의 안전성
- 제1부 : 일반요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-1:2015 수지형 전동공구의 안전성
- 제2-1부 : 전기드릴의 개별 요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-2:2015 수지형 전동공구의 안전성
- 제2-2부 : 전기드릴의 개별 요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-6:2015 수지형 전동공구의 안전성
- 제2-6부 : 전기해머의 개별 요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KS C IEC 62053-11:2003 유도형 유효 전력량계 (0.5급 1급 및 2급)
- 5.6. 보호 계급 Ⅱ의 절연 케이스로 쌓인 계기
- 5.7. 불연성		 AC 600 V 이하 소재지-1
KS C IEC 62052-11:2005 전기계량 장치(교류) - 시험과 시험 조건을 위한 일반 요구 조건
- 제11부 : 계량 장치
- 5.8. 열과 불에 대한 저항
- 5.9. 먼지나 물의 침투로부터 보호		 AC 600 V 이하 소재지-1
KS C IEC 61850-10:2025 전력 유틸리티 자동화를 위한 통신 네트워크 및 시스템 - 제10부 : 적합성 시험 UC AIug Server 및 Client 소재지-1
IEC 61558-1:2009 Safety of power transformers power supply units and similar - Part 1 : General requirements and tests AC 1 kV or less 소재지-1
IEC 61010-2-101:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 - 101 : Particular requirements for in vitro diagnostic(IVD) medical equipment AC 600 V or less 소재지-1
IEC 61010-2-081:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2 - 081 : Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes AC 600 V or less 소재지-1
IEC 61010-2-051:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-051 : Particular requirements for laboratory equipment for mixing and stirring AC 600 V or less 소재지-1
IEC 61010-2-040:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 : Particular requirements for sterilizers and Washer-disinfectors used to treat medical materials AC 600 V or less 소재지-1
IEC 61010-2-020:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020 : Particular requirements for laboratory centrifuges AC 600 V or less 소재지-1
IEC 61010-2-010:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : Particular requirements for laboratory equipment for the heating of materials AC 600 V or less 소재지-1
IEC 61010-1:2010+AMD1:2016 Safety requirements for electrical equipment for measurement control and laboratory use - Part 1 : General requirements AC 600 V or less 소재지-1
IEC 60079-31:2022 Explosive atmospheres - Part 31 : Equipment dust ignition protection by enclosure “t”

6.1.1.3 Pressure test
6.1.2 Tests to determine maximum surface temperature		 Max. 15 600 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃

Surface Temp.: (-60 ~ +500) ℃		 소재지-1
IEC 60255-1:2009 Measuring Relays and Protection Equipment Part 1 : Common requirements 0.9 ~ 1 A,
≥ 5 ~ 30 A,
500 V ± l0 %,
500 V d.c.,
12 V r.ms. ac or 12 V d.c.,
30 mV ~ 230 V,
0.1 Ω or less,
10 MΩ or more,
100 MΩ or more,
≥ 30 ~ 1 000 W
at L/R = 40 ms,
-40 ℃ ~ 70 ℃/
±3 ℃/
1 ℃ ± 0.2 ℃/min,
93 ± 3 %,
60 % ± 10 %,
97 %, -2 % +3 %,
45 ~ 75 % RH,
86 ~ 106 kPa,
50 Hz or 60 Hz
±0.2 %		 소재지-1
IEC 60255-27:2013 Measuring Relays and Protection Equipment Part 27 : Product safety requirements 0.9 ~ 1 A,
≥ 5 ~ 30 A,
500 V ± l0 %,
500 V d.c.,
12 V r.ms. ac or 12 V d.c.,
30 mV ~ 230 V,
0.1 Ω or less,
10 MΩ or more,
100 MΩ or more,
≥ 30 ~ 1 000 W
at L/R = 40 ms,
-40 ℃ ~ 70 ℃,
±3 ℃,
1 ℃ ± 0.2 ℃/min,
93 ± 3 %,
60 % ± 10 %,
97 %, -2 % +3 %,
45 ~ 75 % RH,
86 ~ 106 kPa,
50 Hz or 60 Hz
±0.2 %		 소재지-1
IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code) IP1X - IP6X
IPX1 - IPX9		 소재지-1
IEC 60745-1:2006 Hand-held motor-operated electric tools - Safety - Part 1 : General requirements single phase : 250 V or less
three phase : 440 V or less		 소재지-1
IEC 60745-2-1:2008 Hand-held motor-operated electric tools - Safety - Part 2-1 : Particular requirements for drills and impact drills single phase : 250 V or less
three phase : 440 V or less		 소재지-1
IEC 60745-2-14:2010 Hand-held motor-operated electric tools - Safety - Part 2-14 : Particular requirements for planers single phase : 250 V or less
three phase : 440 V or less		 소재지-1
IEC 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2 - 6 : Particular requirements and tests for safety isolating transformers and power supply units incorporating safety  isolating transformers AC 1 kV or less 소재지-1
KS C IEC 60825-2:2015 레이저 제품의 안전성 - 제2부 : 광섬유 통신 시스템의 안전성 파장 : (250 ~ 2 500) nm
광파워 : 1 W 이하		 소재지-1
KS C IEC 60825-1:2017 레이저 제품의 안전성 - 제1부 : 기기 등급 분류 및 요구 사항 파장  : (250 ~ 2 500) nm
파워  : 1 W 이하		 소재지-1
KS C IEC 60529:2017 외함의 밀폐 보호등급 구분(IP코드) IP1X - IP6X
IPX1 - IPX9		 소재지-1
KS C IEC 60255-27:2015 전기 계전기 - 제27부 : 제품 안전 요구사항 0.9 ~ 1 A,
≥5 ~ 30 A,
500 V ± l0 %,
500 V d.c.,
12 V rms. ac or 12 V d.c.,
30 mV ~ 230 V,
≤0.1 Ω,
≥10 MΩ,
≥100 MΩ,
≥30 ~ 1 000 W
at L/R = 40 ms,
-40 ℃ ~ 70 ℃,
±3 ℃,
1 ℃ ± 0.2 ℃/min,
93 ± 3 %,
60 % ± 10 %,
97 %, -2 % +3 %,
45 ∼ 75 % RH,
86 ∼ 106 kPa,
50 Hz or 60 Hz
±0.2 %		 소재지-1
KS C IEC 60255-1:2014 측정 계전기와 보호 장치 — 제1부 : 공통 요구사항 0.9 ~ 1 A,
≥5 ~ 30 A,
500 V ± 10 %,
500 V d.c.,
12 V rms. ac or 12 V d.c.,
30 mV ~ 230 V,
≤0.1 Ω,
≥10 MΩ,
≥100 MΩ,
≥30 ~ 1 000 W
at L/R = 40 ms,
-40 ℃ ~ 70 ℃,
±3 ℃,
1 ℃ ± 0.2 ℃/min,
93 ± 3 %,
60 % ± 10 %,
97 %, -2 % +3 %,
45 ~ 75 % RH,
86 ~ 106 kPa,
50 Hz or 60 Hz
±0.2 %		 소재지-1
KS C IEC 60079-18:2014 폭발성 분위기 - 제18부 : 몰드 방폭구조 “m” 에 의한 기기보호
<현장시험>
8.1.2 절연내력 시험		 15 000 V 이하, 2 000 A 이하,
표면온도: (-60 ~ +500) ℃
<현장시험>
15 000 V 이하		 소재지-1
KS C IEC 60079-15:2017 폭발성 분위기 - 제15부 : 비점화 방폭구조 “n” 에 의한 기기보호
<현장시험>
6.2 접지 또는 프레임에 대한 절연내력
11.2.2 내전압 시험
11.3.2 압력으로 인해 용기의 체적이 변하지 않는 기기		 15 000 V 이하, 2 000 A 이하,
표면온도: (-60 ~ +500) ℃
<현장시험>
15 000 V 이하		 소재지-1
KS C IEC 60079-11:2011 폭발성 분위기 - 제11부 : 본질안전 “i” 에 의한 기기보호
<현장시험>
10.3 절연내력시험		 15 600 V 이하, 2 000 A 이하,
표면온도: (-60 ~ +500) ℃
<현장시험>
15 600 V 이하		 소재지-1
KS C IEC 60079-7:2015 폭발성 분위기 - 제7부 : 안전증 방폭구조 “e” 에 의한 기기보호
<제외항목>
6.2 회전 전기기기
부속서 A 회전 전기기기의 온도 결정
<현장시험>
7.1 절연내력시험
6.8.2 최대 소비전력법
6.8.3 한정 배열법		 13 640 V 이하, 2 000 A 이하,
표면온도: (-60 ~ +500) ℃
<현장시험>
13 640 V 이하,
표면온도 : (-60 ~ +500) ℃		 소재지-1
KS C IEC 60079-6:2015 폭발성 분위기 - 제6부 : 유입 방폭구조 “o” 에 의한 기기보호
<현장시험>
6.1.3 밀봉되지 않은 용기의 내압시험
6.1.4 최고 온도		 13 640 V 이하, 2 000 A 이하,
최대과압: 1 MPa,
표면온도: (-60 ~ +500) ℃
<현장시험>
최대과압: 150 kPa,
표면온도: (-60 ~ +500) ℃		 소재지-1
KS C IEC 60079-5:2015 폭발성 분위기 - 제5부 : 충전 방폭구조 “q” 에 의한 기기보호
<현장시험>
5.1.3 충전재의 절연 내력 시험
5.1.4 최고 온도		 1 000 V 이하, 16 A 이하,
최대과압: 1 MPa,
표면온도: (-60 ~ +500) ℃
<현장시험>
1 000 V 이하,
표면온도 : (-60 ~ +500) ℃		 소재지-1
KS C IEC 60079-2:2014 폭발성 분위기 - 제2부 : 압력 방폭구조 “p” 에 의한 기기보호
<현장시험>
16.1 최대 양압 정격의 결정
16.2 최대 양압시험
16.3 누설시험
16.4 내부 누출원이 없는 가압용기의퍼지 시험 및 정적가압의 충전 절차 시험
16.5 내부 누출원이 있는 가압용기의 퍼지 및 희석시험
16.6 최소 양압의 검증
16.7.1 양압시험
16.8 제한적 누출이 있는 컨테인먼트 시스템에 대한 양압시험		 13 640 V 이하, 2 000 A 이하,
최대압력: 15 kPa, 최대유량: 300 LPM,
표면온도: (-60 ~ +500) ℃
<현장시험>
최대압력 : 15 kPa, 최대유량 : 300 LPM		 소재지-1
KS C IEC 60079-1:2019 폭발성 분위기 - 제1부 : 내압 방폭구조 “d” 에 의한 기기보호
<현장시험>
15.2.3 내압시험		 13 640 V 이하, 2 000 A 이하,
최대과압: 10 MPa,
표면온도: (-60 ~ +500) ℃
<현장시험>
최대과압: 10 Mpa		 소재지-1
KS C IEC 60079-0:2019 폭발성 분위기 - 제0부 : 일반요구사항
<제외항목>
26.11 내화학성 시험
<현장시험>
26.4.2 내충격성
26.4.3 낙하 시험
26.5.1 부싱의 토크 시험
26.13 비금속 재료 용기부에 대한 표면 저항 시험		 15 600 V 이하, 2 000 A 이하,
표면온도: (-60 ~ +1 000) ℃
<현장시험>
표면온도: (-60 ~ +1 000) ℃		 소재지-1
KS C 1214:2010 전자식유효/무효 전력량계
(유효 0.2급/0.5급 1.0급/ 2.0급 무효 2.0급/3.0급)
- 7.22. 먼지 물의 침투에 대한 보호성
- 7.23. 열과 불의 내력		 AC 600 V 이하 소재지-1
IEC 60079-26:2021 Explosive atmospheres - Part 26 : Equipment With Separation Elements or combined Levels of Protection Max. 15 600 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃		 소재지-1
IEC 60079-28:2015 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

6.2 Verification of suitability of test set-up for type tests
6.3 Type tests

5.2.2.2 Optical power		 1 μW ~ 3 W 소재지-1
IEC 62052-11:2003 Electricity metering equipment(AC) - General requirements tests and test conditions - Part 11 : Metering equipment
- 5.8. Resistance to heat and fire
- 5.9. Protection against penetration of dust and water		 AC 600 V or less 소재지-1
IEC 61850-10:2012+AMD1:2025 Communication networks and systems in substations - Part 10 : Conformance testing - Client(Edition 2 interface, Edition 2 Amendment 1 interface)
- Server(Edition 2 interface, Edition 2 Amendment 1 interface)		 소재지-1
IEEE Std 1815-2012 IEEE Standard for Electric Power Systems Communications-Distributed Network Protocol (DNP3) CN-ASE2000K
BCOM-USB RTU		 소재지-1
KC 61029-2-4:2015 이동형 전동공구의 안전성 - 제 2-4부 : 탁상그라인더의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-3:2015 수지형 전동공구의 안전성
- 제 2-3부 : 전기 그라인더, 포리셔 및 디스크 샌더의 개별 요구사항		 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-2:2022 휴대형 전동공구의 안전성 - 제2-2부 : 스크류드라이버 및 임펙트 렌치의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
IEC 62053-22:2003 Electricity metering equipment(a.c.) - Particular requirements - Part 22 : Static meters for active (classes 0.2 S and 0.5 S)
- 5. Resistance to heat and fire, Protection against penetration of dust and water		 AC 600 V or less 소재지-1
IEC 62053-23:2003 Electricity metering equipment(a.c.) - Particular requirements - Part 23 : Static meters for reactive (classes 2 and 3)
- 5. Resistance to heat and fire, Protection against penetration of dust and water		 AC 600 V or less 소재지-1
ISO 80079-36:2019 Explosive atmospheres - Part 36: Non-electrical equipment for  explosive atmospheres - Basic method and requirements

8.2 Determination of the maximum surface temperature
8.3 Mechanical tests		 Max. 15 600 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +1 000) ℃

Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
ISO 80079-37:2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety “c”, control of ignition sources “b”, liquid immersion “k”

8.3.2 Increased pressure test on enclosed equipment having a sealed enclosure that contains static, or flowing protective liquid
8.3.3 Overpressure test on enclosed equipment havind a vented enclosure		 Max. 15 600 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃,
1 Mpa

1 Mpa		 소재지-1
IEEE C37.90:2005 IEEE Standard for Relays and Relay Systems Associated with Electric Power Apparatus Rated Current Input : 32 A or less
Rated Voltage Input : 300 V or less		 소재지-1
K 60974-1:2010 아크용접기 - 제 1부 : 용접 전력원 AC 400 V 이하 소재지-1
KC 61558-2-6:2015 전력용변압기, 전원공급장치 및 유사기기의 안전 제2-6부: 범용 절연 변압기의 개별요구사항 AC 1 kV 이하 소재지-1
KC 60529:2015 외함의 보호등급(IP code) IP1X - IP6X
IPX1 - IPX9		 소재지-1
KC 61029-2-3:2015 이동형 전동공구의 안전성 - 제 2-3부 : 대패 및 씨크니서에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-2:2015 이동형 전동공구의 안전성 - 제 2-2부 : 레이디얼암톱(radial arm saws)의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-1:2015 이동형 전동공구의 안전성 - 제 2-1부 : 전기 원형톱에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
IEC 60745-2-4:2008 Hand-held motor-operated electric tools - Safety
- Part 2-4 : Particular requirements for sanders and polishers other than disk type		 single phase : 250 V or less
three phase : 440 V or less		 소재지-1
IEC 60745-2-5:2010 Hand-held motor-operated electric tools - Safety - Part 2-5 : Particular requirements for circular saws single phase : 250 V or less
three phase : 440 V or less		 소재지-1
IEC 60825-1:2014 Safety of laser products - Part 1 : Equipment classification and requirements wavelength : (250 ~ 2 500) nm
Optical power : 1 W or less		 소재지-1
IEC 60825-2:2021 Safety of laser products - Part 2 : Safety of optical fibre communication systems(OFCS) wavelength : (250 ~ 2 500) nm
Optical power : 1 W or less		 소재지-1
IEC 60974-1:2012 Arcwelding equipment - Part 1 : Welding power sources AC 400 V or less 소재지-1
KC 60745-2-4:2015 수지형 전동공구의 안전성 - 제 2-4부 : 원반형 외의 전기샌더, 포리셔의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-5:2016 휴대형 전동공구의 안전성 - 제 2-5부 : 전기 원형 톱의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-6:2022 휴대형 전동공구의 안전성 - 제2-6부：전기해머의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-8:2022 휴대형 전동공구의 안전성 - 제2-8부 : 전기가위 및 나블러의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-9:2022 휴대형 전동공구의 안전성 - 제2-9부 : 전기태퍼의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-11:2015 수지형 전동공구의 안전성- 제 2 -11부 : 전기왕복톱(지그톱 및 사브레톱)의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-12:2015 수지형 전동공구의 안전성 - 제 2-12부 : 전기콘크리트 진동기의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-13:2022 휴대형 전동공구의 안전성 - 제2-13부 : 전기체인톱의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-14:2022 휴대형 전동공구의 안전성 - 제2-14부 : 전기 대패에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-15:2022 휴대형 전동공구의 안전성 - 제2-15부 : 헤지트리머의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-16:2022 휴대형 전동공구의 안전성 - 제2-16부 : 전기 태커에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-17:2022 휴대형 전동공구의 안전성 - 제2-17부 : 전기 라우터 및 트리머에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60974-6:2015 아크용접기 - 제 6부 : 제한적 사용을 위한 수동 금속 아크 용접용 전원 소스 250 A 이하
30 V 이하 부하		 소재지-1
KC 61029-1:2015 이동형 전동공구의 안전성 - 제 1부 : 일반요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-1:2022 휴대형 전동공구의 안전성 - 제 1부 : 일반요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 60745-2-1:2022 휴대형 전동공구의 안전성 - 제2-1부 : 전기드릴의 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-5:2015 이동형 전동공구의 안전성 - 제 2-5부 : 밴드톱에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-8:2015 이동형 전동공구의 안전성 - 제 2-8부 : 단일축 수직 성형기에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-9:2015 이동형 전동공구의 안전성 - 제 2-9부 : 마이터톱에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-10:2015 이동형 전동공구의 안전성 - 제 2-10부 : 절단용 연삭기에 관한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61558-1:2015 전력변압기, 전력공급장치 및 이와 유사한 전원장치의 안전 - 제 1부 : 일반 요구사항 및 시험 AC 1 kV 이하 소재지-1
KC 61558-2-13:2015 전력용 변압기, 전원공급장치 및 유사기기의 안전 기준
- 범용 복권 변압기		 AC 1 kV 이하 소재지-1
한전등록구매규격 (GS-6625-0015:2010) 저압전자식 전력량계 (Static Meters for Low Voltage)
- 7.4.7.4. 열과 불에 대한 저항
- 7.4.7.5. 먼지나 물의 침투로부터 보호		 AC 600 V 이하 소재지-1
한전등록구매규격 (GS-6625-0061:2017) E-type저압 전자식전력량계 (E-Type Static Meters for Low Voltage)
- 7.4.7. 내열 및 내화, 방진 및 방수		 AC 600 V 이하 소재지-1
한전등록구매규격 (GS-6625-0060:2018) 고압고객용전자식 전력량계 (Solid State Recording Electronic Meter)
- 7.3.7.4. 열과 불에 대한 저항
- 7.3.7.5. 먼지나 물의 침투로부터 보호		 AC 600 V 이하 소재지-1
산업통상자원부 고시 제2018-206호 (2018.11.20) 전력량계 기술기준
- 제1-1절 전력량계 일반 요구사항
12.5 열과 불의 내력
12.6 먼지‧물의 침투에 대한 보호성
- 제1-2절 교류 유도형 전력량계 형식승인기준
12.5 열과 불의 내력
12.6 먼지‧물의 침투에 대한 보호성
- 제1-3절 교류 전자식 전력량계 형식승인 기준
12.5 열과 불의 내력
12.6 먼지‧물의 침투에 대한 보호성
- 제1-4절 직류 전자식 전력량계 형식승인 기준
12.5 열과 불의 내력
12.6 먼지‧물의 침투에 대한 보호성		 AC 600 V 이하 소재지-1
SPS-KEMC 1120-0579:2019 디지털 보호계전기 AC 220 V 이하
임펄스 5 kV 이하
내전압 2 kV 이하
절연저항 100 Mohm 이상		 소재지-1
GS-5945-0019:2022 소내전원 및 방재보안용 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하		 소재지-1
GS-5945-0020:2022 저주파수 보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하		 소재지-1
GS-5945-0021:2022 과전압보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하
과전압한시동작 160 V 이하		 소재지-1
GS-5945-0022:2024 변압기 제어 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하		 소재지-1
IEC 62053-21:2003 Electricity metering equipment(a.c.) - Particular requirements - Part 21 : Static meters for active energy (classes 1 and 2)
- 5. Resistance to heat and fire, Protection against penetration of dust and water		 AC 600 V or less 소재지-1
GS-5945-0023:2022 변압기 전류비율차동보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하
과전류순시요소 100 A 이하		 소재지-1
IEEE Std 2030.5-2023 IEEE Standard for Smart Energy Profile Application Protocol All 소재지-1
KC 61029-2-6:2015 이동형 전동공구의 안전성 - 제 2-6부 : 급수식 다이아몬드드릴에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
KC 61029-2-7:2015 이동형 전동공구의 안전성 - 제 2-7부 : 다이아몬드톱에 대한 개별 요구사항 단상 : 250 V 이하
삼상 : 440 V 이하		 소재지-1
GS-5945-0025:2024 재폐로부 방향성 과전류 보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하
과전류순시요소 80 A 이하		 소재지-1
GS-5945-0026:2022 저전압보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 DC 125 V 이하
접정용량 30 A 이하		 소재지-1
GS-5945-0028:2022 170kV용 과전류보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 AC 220 V 이하, DC 125 V 이하
접정용량 30 A 이하
과전류순시요소 80 A 이하		 소재지-1
GS-5945-0029:2022 170kV용 방향성과전류보호 IED
<제외항목>
5.2.(7)절:EMC시험
5.2.(8)절:환경시험		 AC 220 V 이하, DC 125 V 이하
접정용량 30 A 이하
과전류순시요소 80 A 이하		 소재지-1
GS-6110-0074:2022 154kV 변압기 보호배전반
<제외항목>
6.2.(6)절:EMC시험
6.2.(7)절:제어전원 이상 시험
6.2.(8)절:환경시험		 AC 220 V 이하, DC 125 V 이하
접정용량 30 A 이하
과전류순시요소 80 A 이하
과전압순시요소 160 V 이하		 소재지-1
GS-6110-0094:2022 154kV 디지털변전소 운영시스템 AC 220 V 이하,  DC 125 V 이하 소재지-1
GS-6110-0097:2022 154kV 디지털변전소 혼용운영시스템 AC 220 V 이하,  DC 125 V 이하 소재지-1
GS-6110-0098:2018 345kV 디지털변전소 혼용운영시스템 AC 220 V 이하,  DC 125 V 이하 소재지-1
GS-6110-0247:2012 소내전원 및 방재보안설비용 IED반 DC 125 V 이하
접정용량 30 A 이하		 소재지-1
GS-6110-0263:2024 지중송전선로 On-line 부분방전진단시스템 DC 125 V 이하
센서주파수 300 MHz 이하		 소재지-1
GS-6110-0265:2022 154kV 변압기 보호 IED반
<제외항목>
6.2.2.(6)절:EMC시험
6.2.2.(7)절:제어전원 이상 시험
6.2.2.(8)절:환경시험		 AC 220 V 이하, DC 125 V 이하
접정용량 30 A 이하
과전류순시요소 80 A 이하
과전압순시요소 160 V 이하		 소재지-1
GS-6110-0269:2024 변전소 종합 예방진단 시스템
<제외항목>
6.1.2.(5)절:부분방전장치 특성시험
6.1.2.(10)절:환경시험
6.1.2.(11)절:EMC시험
6.1.2.(13)절:설치후 시험		 DC 125 V 이하
접정용량 30 A 이하		 소재지-1
GS-6110-0270:2022 154kV 고객송전선로 IED반 (방향성 과전류 방식)
<제외항목>
6.2.2.(6)절:EMC시험
6.2.2.(7)절:제어전원 이상 시험
6.2.2.(8)절:환경시험		 AC 220 V 이하, DC 125 V 이하
접정용량 30 A 이하
단락과전류순시동작요소 80 A 이하		 소재지-1
GS-6110-0271:2022 154kV 고객송전선로 IED반 (과전류 방식)
<제외항목>
6.2.2.(6)절:EMC시험
6.2.2.(7)절:제어전원 이상 시험
6.2.2.(8)절:환경시험		 AC 220 V 이하,  DC 125 V 이하
접정용량 30 A 이하		 소재지-1
IEC 60745-2-3:2012 Hand-held motor-operated electric tools - Safety - Part 2-3 : Particular requirements for grinders polishers and disk-type sanders single phase : 250 V or less
three phase : 440 V or less		 소재지-1
KS C IEC 60079-30-1:2007 방폭 전기기계 기구 - 제30-1부: 전기저항 트레이스 히터 - 일반 및 시험 요구사항
<현장시험>
5.1.2 내전압 시험
5.1.3 전기적 절연저항 시험
5.1.13 최대 표면 온도 결정		 내전압: (AC/DC) 5 kV이하
초기전류: 40 A 이하
표면온도: (-60 ~ +1 000) ℃
<현장시험>
내전압: (AC/DC) 5 kV이하
표면온도: (-60 ~ +1 000) ℃		 소재지-1
IEC/IEEE 60079-30-1:2015 Explosive atmosphere - Part 30-1: Electrical resistance trace heating - General and testing requirements

5.1.2 Dielectric test
5.1.3 Electrical insulation resustance test
5.1.13 Determination of maximum sheath temperature		 Dielectric test: (AC/DC) 5 kV or less
Start-up Current: 40 A or less
Surface Temp.: (-60 ~ +1 000) ℃

Dielectric test: (AC/DC) 5 kV or less
Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
KS C IEC 60079-28:2015 폭발 분위기－제28부：광학 방사를 사용하는 설비 및 전송 시스템의 보호
<제외항목>
6.2 기준시험
6.3 시험혼합물
<현장시험>
5.2.2.2 Optical power		 1 μW ~ 3 W 소재지-1
KS C IEC 60079-26:2021 폭발성 분위기 - 제26부: 분리요소가 있거나 보호등급이 조합된 기기 15 600 V 이하, 2 000 A 이하,
표면온도: (-60 ~ +500) ℃		 소재지-1
KS C IEC 60079-13:2017 폭발성 분위기 - 제13부: 가압실 “p” 및 강제 환기실 “v”에 의한 기기 보호
<현장시험>
6.4.3 양압 시험
6.4.4 퍼지 시험
6.4.5 최소 차압 시험
7.1.3 최소 유량
7.5.3 퍼지 시험
7.5.4 최소 환기 유량 시험		 표면온도: (-60 ~ +500) ℃
최대압력: 15 kPa
최대유량: 300 LPM
<현장시험>
최대압력 : 15 kPa,
최대유량 : 300 LPM
표면온도: (-60 ~ +500) ℃		 소재지-1
IEC 60079-11:2023 Explosive atmospheres - Part 11 : Equipment protection by intrinsic safety “i”

10.3 Dielectric strength tests		 Max. 15 600 V, Max. 900 A,
Surface Temp.: (-60 ~ +1 000) ℃

Max. 15 600 V		 소재지-1
IEC 60079-25:2020+AMD1:2025 Explosive atmospheres - Part 25 : intrinsically safe electrical systems Max. 15 600 V, Max. 900 A,
Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
CHAdeMO V2L 2.1:2014 Guidelines of Charge/Discharge System for Electric Vehicle V2L DC version
EVPS-004：2014
Version 2.1
8. Communication control		 - 소재지-1
CHAdeMO V2H 2.2:2022 Guidelines of Charge/Discharge System for Electric Vehicle V2H DC version – EVPS-002：2022 Version 2.2
Part 1. Basic requirements
8. Communication control
9. Charge/discharge control
Part 2. Extended specifications
Part 3. Compatibility		 - 소재지-1
CHAdeMO 0.9.1:2012 Technical Specifications of Quick Charger for the Electric Vehicle
CHAdeMO Rev. 0.9.1
6. Communication control
7. Charging control		 - 소재지-1
CHAdeMO 1.2.7:2025 Technical Specifications of Quick Charger for Electric Vehicles - CHAdeMO 1.2 7th Edition
Part 1.
8. Communication control
9. Charging control
Part 2.
2. Communicaion protocol
3. Extended function
Part 3.
1. Compatibility of charging control		 - 소재지-1
CHAdeMO 2.0.4:2025 Technical Specifications of Quick Charger for Electric Vehicles - CHAdeMO 2.0.4
Part 1.
8. Communication control
9. Charging control
Part 2.
2. Communicaion protocol
3. Extended function
Part 3.
1. Compatibility of charging control		 - 소재지-1
DIN SPEC 70122:2018 Electromobility - Conformance test for digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System
8.2 SECC + PLC bridge test cases
9.2 SECC + PLC bridge test cases
10.2 SECC + PLC bridge test cases
11.2 SECC + PLC bridge test cases
12.2 SECC + PLC bridge test cases
13.5.2 SECC + PLC bridge test cases
13.6.2 SECC + PLC bridge test cases
13.7.2 SECC + PLC bridge test cases		 - 소재지-1
DIN SPEC 70121:2014 Electromobility - Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging in the Combined Charging System - 소재지-1
ISO 15118-20:2022 Road vehicles - Vehicle to grid communication interface - Part 20: 2nd generation network layer and application layer requirements - 소재지-1
KS R ISO 15118-5:2020 도로 차량 - V2G 통신 인터페이스 - 제5부:물리 계층과 데이터 링크 계층 적합성 시험
8.3 SECC + PLC 브리지 시험 케이스		 - 소재지-1
ISO/IEC 15118-5:2018 Road vehicles - Vehicle to grid communication interface - Part 5: Physical layer and data link layer conformance test
8.3 SECC + PLC bridge test cases		 - 소재지-1
KS R ISO 15118-4:2020 도로 차량 - V2G 통신 인터페이스 - 제4부:네트워크 및 응용 프로토콜 적합성 시험
8.2 SECC 시험케이스
9.2 SECC 시험케이스
10.2 SECC 시험케이스		 - 소재지-1
ISO/IEC 15118-4:2018 Road vehicles - Vehicle to grid communication interface - Part 4: Network and application protocol conformance test
8.2 SECC test cases
9.2 SECC test cases
10.2 SECC test cases		 - 소재지-1
KS R ISO 15118-3:2021 도로 차량 - V2G 통신 인터페이스 - 제3부:물리 및 데이터 링크 계층 요구사항 - 소재지-1
ISO/IEC 15118-3:2015 Road vehicles - Vehicle to grid communication interface - Part 3: Physical and data link layer requirements - 소재지-1
OCPP 1.6 ed2:2017 Open Charge Point Protocol 1.6 - 소재지-1
OCPP 2.0.1 ed4:2025 Open Charge Point Protocol 2.0.1 - 소재지-1
GS-6110-0097:2022 154 kV 디지털변전소 혼용운영시스템
5.4 (2)항: 절연 저항측정,
5.4 (3)항: 상용주파 내전압시험,
5.4 (4)항: 뇌임펄스 내전압시험,
5.4 (8)항: 부담 측정,
5.4 (9)항: 과부하 내량 시험,
5.4 (10)항: 접점용량시험,
5.4 (11)항: 시스템 기능/성능시험,
5.4 (12)항: IEC61850 통신서비스 시험(Client),
5.4 (15)항: IEC61850 통신서비스 시험(Server)		 5.4 (2)항: AC 500 V, 60 GΩ,
5.4 (3)항: AC 2 kV,
5.4 (4)항: AC 5 kV,
5.4 (8)항: DC 150 V, AC 275 V, 30 A,
5.4 (9)항: DC 200 V, 60 A,
5.4 (10)항: 150 V		 소재지-1
GS-6110-0094:2022 154 kV 디지털변전소 운영시스템
5.4 (2)항: 절연 저항측정,
5.4 (3)항: 상용주파 내전압시험,
5.4 (4)항: 뇌임펄스 내전압시험,
5.4 (8)항: 부담 측정,
5.4 (9)항: 시스템 기능/성능시험,
5.4 (10)항: IEC61850 통신서비스 시험(Client),
5.4 (13)항: IEC61850 통신서비스 시험(Server)		 5.4 (2)항: AC 500 V, 60 GΩ,
5.4 (3)항: AC 2 kV,
5.4 (4)항: AC 5 kV,
5.4 (8)항: DC 150 V, AC 275 V, 30 A		 소재지-1
GS-5895-0067:2023 SCADA IEC 61850 FEP
7.1.28.1.1.58 항: IEC61850 통신 서비스 시험 (Client)
7.1.28.1.1.59 항: 기능 및 성능 시험		 - 소재지-1
GS-5895-0066:2023 SCADA 다기능 정보전송장치
7.4.1 항 : IEC61850 통신 서비스 시험(Client)
7.4.2 항 : IEC61850 통신서비스 시험(Server)
7.4.3 항 : 기능 및 성능 시험		 - 소재지-1
▶ 가정용 전기기기
IEC 60335-2-40:2022 Household and similar electrical appliances - Safety
- Part 2-40 : Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-7:2024 Household and similar electrical appliances - Safety - Part 2-7 : Particular requirements for washing machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-11:2024 Household and similar electrical appliances - Safety
- Part 2-11: Particular requirements for tumble dryers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IDMS VERSION 1.2 INFORMATION DISPLAY MEASUREMENTS STANDARD
5. Fundamental Measurements
5.3 Full-Screen White
5.6 Full-Screen Black
5.10 Sequential Contrast
5.14 Full-Screen Primary Colors (R, G, and B)
5.18 Chromaticity Gamut Area
5.19 White-Point Accuracy
5.25 Simple Box Measurements
5.26 Checkerboard Luminance and Contrast (nxm)
6. GRAY-& COLOR-SCALE MEASUREMENTS
6.1 GRAY SCALE
8. UNIFORMITY MEASUREMENTS
8.1 SAMPLED UNIFORMITY
9. VIWING-ANGLE MEASUREMENTS
9.1 FOUR-POINT VIEWING ANGLES
20. HIGH DYNAMIC RANGE (HDR)		 Horizontal angle(φ) : (0 ~ 360) °
Vertical angle(θ) : (0 ~ 180) °
Correlated color temperature(CCT) : (2 580~7 040) K
CIE 1931 xy chromaticity
Luminance : ≤ 5 000 cd/m²		 소재지-1
KC 60335-1:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제1부: 일반요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 60268-2 Amd 1:1991 Sound system equipment. - Part 2: Explanation of general terms and calculation methods Sensitivity : 50 mV/Pa
Frequency : 6.3 Hz ~ 20 kHz		 소재지-1
IEC 60268-3:2013 Sound system equipment - Part 3: Amplifiers Output power : (0 ~ 5 000) W 소재지-1
IEC 60268-11 Amd 2:1991 Sound system equipment - Part 11: Application of connectors for the interconnection of sound system components Sensitivity : 50 mV/Pa
Frequency : 6.3 Hz ~ 20 kHz		 소재지-1
IEC 60268-12 Amd 2:1994 Sound system equipment. - Part 12: Application of connectors for broadcast and similar use. Sensitivity : 50 mV/Pa
Frequency : 6.3 Hz ~ 20 kHz		 소재지-1
IEC 60335-1:2016 Safety of household and similar electrical appliances - Safety - Part 1 : General requirements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-2:2019 Household and similar electrical appliances - Safety - Part 2-2 : Particular requirements for vacuum cleaners and water-suction cleaning appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 60335-2-5:2025 가정용 및 이와 유사한 전기기기의 안전성
- 제2-5부 : 전기 식기세척기의 대한 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 60335-2-40:2018 Household and similar electrical appliances - Safety - Part 2-40 : Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-41:2012 Household and similar electrical appliances - Safety - Part 2-41 : Particular requirements for pumps Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-49:2017 Household and similar electrical appliances - Safety - Part 2-49 : Particular requirements for commercial electric appliances for keeping food and crockery warm Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-53:2017 Household and similar electrical appliances - Safety - Part 2-53 : Particular requirements for sauna heating appliances and infrared cabins Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-55 am1:2008 Household and similar electrical appliances - Safety - Part 2-55 : Particular requirements for electrical appliances for use With aquariums and garden ponds Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-59 am1&2:2009 Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-64:2017 household and similar electrical appliances - Safety - Part 2-64 : Particular requirements for commercial electric kitchen machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-65:2015 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-75:2018 Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-80:2015 Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-84:2019 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-89:2019 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-90:2019 Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60268-1 Amd 2:1988 Sound system equipment. - Part 1: General Sensitivity : 50 mV/Pa
Frequency : 6.3 Hz ~ 20 kHz		 소재지-1
IEC 60065:2014 Audio Video and similar electronic apparatus - Safety requirements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃ 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KS R IEC 62196-2:2019 플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛-전기자동차의 전도성 충전 제2부 : 교류 핀과 접촉 튜브 부속품에 대한 치수 적합성 및 상호 호환성 요구사항 AC 500 V / 250 A 이하
3상 : 63 A 이하
단상 : 70 A 이하		 소재지-1
RTE INEN 083:2013 TV Tunner ISDB-T International Digital Television Standard RF : 100 kHz ~ 3 GHz
RF power : (-120 ~ 10) dBm		 소재지-1
RTE INEN 114:2013 Speakers Sensitivity : 50 mV/Pa
Frequency : 6.3 Hz ~ 20 kHz		 소재지-1
RTE INEN 118:2013 Electric amplifiers Output power : (0 ~ 5 000) W 소재지-1
RTE INEN 139:2015 Electric heaters for domestic use AC 1-phase or 3-phase
Voltage: Max. 480 V
Current: Max. 32 A/상
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 147:2014 Electric irons AC 1-phase
Voltage: Max. 300 V
Current: Max. 32 A/상
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 179:2014 Skin or hair care devices AC 1-phase
Voltage: Max. 300 V
Current: Max. 32 A/상 DC
Voltage: Max. 30 V
Current: Max. 20 A
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 191:2014 Haircutters and similar appliances AC 1-phase
Voltage: Max. 300 V
Current: Max. 32 A/상당 DC
Voltage: Max. 30 V
Current: Max. 20 A
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 197:2014 Vacuum cleaners AC 1-phase
Voltage: Max. 300 V
Current: Max. 32 A/상당 DC
Voltage: Max. 30 V
Current: Max. 20 A
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 202 Equipment Printing and Scanning Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
RTE INEN 203:2014 Machines with motor for use in the kitchen AC 1-phase
Voltage: Max. 300 V
Current: Max. 32 A/상당 DC
Voltage: Max. 30 V
Current: Max. 20 A
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 208:2014 Commercial kitchens. Security AC 1-phase or 3-phase
Voltage: Max. 480 V
Current: Max. 32 A/상
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 227:2016 Electrical apparatus for heating liquids, for cooking food and the like AC 1-phase
Voltage: Max. 300 V
Current: Max. 32 A/상
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 277:2015 Electric Water Dispensers AC 1-phase or 3-phase
Voltage: Max. 480 V
Current: Max. 32 A/상
Frequency: 50 Hz or/and 60 Hz		 소재지-1
RTE INEN 283:2015 Refrigeration equipment for commercial use AC 1-phase or 3-phase
Voltage: Max. 480 V
Current: Max. 32 A DC
Voltage: Max. 30 V
Current: Max. 20 A
Frequency: 50 Hz or/and 60 Hz		 소재지-1
Portaria INMETRO nº 577:2015 TECHNICAL REGULATION OF QUALITY FOR REFRIGERATORS AND ASSEMBLIES Input : (3 ~ 450) V, 50 A 소재지-1
IEC 60335-2-3:2015 Household and similar electrical appliances - Safety
- Part 2-3 : Particular requirements for electric iron		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KS C 9101:2014 전기진공청소기
<제외항목>
부속서 C 모래제거 능력 시험 및 융단조작 저항시험		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃ 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KS C 9304:2002 환풍기 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃ 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KS R IEC 62196-1:2015 플러그, 소켓 - 아웃렛, 자동차 커넥터 및 자동차 인렛 - 전기자동차의 전도성 충전 제1부 : 일반 요구사항 AC 690 V / 250 A 이하
DC 600 V / 400 A 이하		 소재지-1
IEC 60335-2-98:2008 Household and similar electrical appliances - safety - Part 2-98: Particular requirements for humidifiers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11 : Glowing/hot-wire based test method - Glow-wire flammability test method for end-products Test temperature : 960 ℃ or less 소재지-1
IEC 60335-2-30:2016 Household and similar electrical appliances - Safety - Part 2-30 : Particular requirements for room heaters Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-31:2018 Household and similar electrical appliances - Safety - Part 2-31 : Particular requirements for range hoods and other cooking fume extractors Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-32:2019 Household and similar electrical appliances - Safety - Part 2-32 : Particular requirements for massage appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 61851-1:2010 Electric vehicle conductive charging system - Part 1 : General requirements Input : below 600 V 소재지-1
IEC 61851-22:2001 Electric vehicle conductive charging system - Part 22 : AC electric vehicle charging system Input : below 600 V 소재지-1
K 10018:2009 가정용 및 이와 유사한 전기기기의 안전성 - 전기온수매트 및 온수침대의 개별 요구사항 입력 : (3 ~ 250) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10019:2009 가정용 및 이와 유사한 전기기기의 안전성 - 전기온수매트 및 침대용 전기보일러의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10020:2021 가정용 및 이와 유사한 전기기기의 안전성 - 전기찜질기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-9:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-9부 : 그릴, 토스터기 및 이와 유사한 휴대용  조리 기기의 개별요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 60335-2-81:2009 가정용및 이와 유사한 전기기기의 안전성 - 제2-81부 : 발보온기 및 발보온 매트의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 60335-2-85:2007 가정용 및 이와 유사한 전기기기의 안전성 - 제2-85부 : 직물용 전기스티머에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 60950-1:2011 정보사무기기의안전 - 제1부 : 일반요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 62040-1:2011 무정전 전원 시스템 - 제1부 : 일반 및 안전 요구사항 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 62196-2:2025 플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 - 전기자동차의 전도성 충전 - 제 2부 : 교류 핀과 접촉튜브 부속품에 대한 치수 적합성 및 상호 호환성 요구사항 AC 500 V / 250 A 이하 소재지-1
K 62477-1:2011 전력전자변환기기 및 시스템 - 제1부 : 일반 500 V 이하 (AC 및 DC 입력) 소재지-1
K 70000:2008 가정용 및 이와 유사한 전기기기의 안전 - 전기소독기 및 이와 유사한 전기기기에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 10018:2021 가정용 및 이와 유사한 전기기기의 안전성 - 전기온수매트 및 온수침대의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 10027:2015 가정용 및 이와 유사한 전기기기의 안전성 - 전열보드의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 10029:2020 가정용 및 이와 유사한 전기기기의 안전성 - 전기 모기채의 개별 요구사항 입력 : 전지 450 Vdc 이하, 50 A 소재지-1
KC 60065:2015 오디오 비디오기기 및 이와 유사한 전자기기의 안전 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 60335-2-29:2019 Household and similar electrical appliances - Safety - Part 2-29 : Particular requirements for battery chargers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-25:2020 Household and similar electrical appliances - Safety - Part 2-25 : Particular requirements for microwave ovens, including combination microwave ovens Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-24:2017 Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60695-2-12:2014 Fire hazard testing - Part 2-12 : Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials Test temperature : 960 ℃ or less 소재지-1
IEC 60695-2-13:2014 Fire hazard testing - Part 2-13 : Glowing/hot-wire based test methods - Glow-wire ignition Temperature (GWIT) test method for materials Test temperature : 960 ℃ or less 소재지-1
IEC 60695-10-2:2014 Fire hazard testing - Part 10-2 : Abnormal heat - Ball pressure test method AC 1 000 V or less 소재지-1
IEC 60950-1:2013 Information technology equipment - safety - Part 1: General requirements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-36:2017 Household and similar electrical appliances - Safety - Part 2-36 : Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-35:2016 Household and similar electrical appliances - Safety - Part 2-35 : Particular requirements for instantaneous water heaters Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-34:2021 Household and similar electrical appliances - Safety - Part 2-34 : Particular requirements for motor-compressors Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-5:2018 Household and similar electrical appliances - Safety - Part 2-5 : Particular requirements for dish washer Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-6:2018 Household and similar electrical appliances - Safety - Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-7:2019 Household and similar electrical appliances - Safety - Part 2-7 : Particular requirements for washing machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-8:2018 Household and similar electrical appliances - Safety - Part 2-8 : Particular requirements for shavers, hair clippers and similar appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-9:2019 Household and similar electrical appliances - Safety - Part 2-9 : Particular requirements for grills toasters and similar portable cooking appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-10:2008 Household and similar electrical appliances - Safety - Part 2-10 : Particular requirements for floor treatment machines and wet scrubbing machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-11:2019 Household and similar electrical appliances - Safety - Part 2-11 : Particular requirements for tumble dryers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-13:2016 Household and similar electrical appliances - Safety - Part 2-13 : Particular requirements for deep fat fryers, frying pans and similar appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-14:2019 Household and similar electrical appliances - Safety - Part 2-14 : Particular requirements for kitchen machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-15:2018 Household and similar electrical appliances - Safety - Part 2-15 : Particular requirements for appliances for heating liquids Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-17:2019 Household and similar electrical appliances - Safety - Part 2-17 : Particular requirements for blankets, pads, clothing and similar flexible heating appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-21:2018 Household and similar electrical appliances - Safety - Part 2-21 : Particular requirements for storage water heaters Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-23:2019 Household and similar electrical appliances - Safety - Part 2-23 : Particular requirements for appliances for skin or hair care Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 62752:2022 전기자동차 모드2 충전을 위한 케이블 일체형 제어 및 보호 장치 (휴대용 전기차충전기) 입력전압: 3P4W, 440 V 이하,

제외항목
9.7.3.5 5 A와 100 A 사이에서 잔류 전류가 갑작스럽게 나타나는 경우에 올바른 동작의 검증,
9.8.2 IC-CPD의 누전 차단 기능의 내구성,
9.9 과전류 상태에서의 IC-CPD의 동작의 검증		 소재지-1
KC 61851-1:2022 전기자동차 충전시스템 제1부: 일반 요구사항 입력전압: 3P4W, 440 V 이하 소재지-1
UL 60335-2-89:2021 Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor
(21.103, 22.108, 22.110, 22.111, 22.112, 22.113, 22.114, 22.115, 22.116, 22.117, 22.118, 22.119, 22.120, 22.121, Annex CC)		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 62368-1:2023 Audio/video information and communication technology equipment - Part 1: Safety requirements

10.6.6 Acoustic test		 Less than AC/DC 600 V 소재지-1
Portaria Inmetro nº 269:2021
(Air Conditioner)		 에어컨 적합성 평가 - 통합본 Cooling/Heating capacity (2 900 ~ 18 600) W 소재지-1
Portaria Inmetro nº 185:2005
(Washing Machine)		 브라질 에너지절약 위한 라벨링 규정(ENCE)
문제 번호 01 - 개정판 01 세탁기
<제외항목>
Projeto de Norma ABNT 03:059.05-025 de 07/1999		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-7:2000 Safety of household and similar electrical appliances - Part 2-7: Particular requirements for washing machines Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-11:2000 Safety of household and similar electrical appliances - Part 2-11: Particular requirements for tumble dryers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-4:1993 Safety of household and similar electrical appliances Part 2-4: Particular requirements for spin extractors Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
NBR NM-IEC 335-1:1998 Safety of household and similar electrical appliances - Part 1: General requirements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 62196-1:2019 플러그, 소켓-아웃렛, 자동차 커넥터, 인렛 및 자동차 어댑터 - 전기자동차의 전도성 충전 - 제1부 : 일반 요구사항 AC 690 V / 250 A 이하
DC 600 V / 400 A 이하		 소재지-1
K 10011:2011 가정용 및 이와 유사한 전기기기의 안전성 - 제2부 : 전기작동 도어록의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10012:2013 가정용 및 이와 유사한 전기기기의 안전성 - 전기헬스기구 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10013:2008 가정용 및 이와 유사한 전기기기의 안전성 - 수도동결방지기 및 이와 유사한 유연성을 가진 전열기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 60335-2-4:2017 Household and similar electrical appliances - Safety - Part 2-4 : Particular requirements for spin extractors Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
Portaria INMETRO nº377 : 2021 Approves the Technical Quality Regulation and Conformity Assessment Requirements for Televisions - Consolidated. Input : (3 ~ 450) V, 50 A 소재지-1
KC 60335-2-34:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-34부 : 전동 압축기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-35:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-35부 : 순간 온수기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-36:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-36부 : 상업용 전기 조리레인지, 오븐, 호브 및 호브소자에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-37:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-37부 : 상업용 전기 튀김기에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-38:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-38부 : 상업용 전기 그리들 그릴에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-39:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-39부 : 상업용 전기 다목적 조리팬의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-40:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-40부 : 히트펌프, 에어컨디셔너 및 제습기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-41:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-41부 : 전기펌프의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-42:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-42부 : 상업용 전기 강제대류식오븐 스팀형 조리기 및 스팀대류형 오븐에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-43:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-43부 : 의류건조기 및 타월걸이의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-44:2021 가정용 및 이와 유사한 전기기기의 안전성 - 제2-44부 : 전기 주름 펴기에 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-45:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-45부 : 휴대형 가열기기 및 이와 유사한 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-47:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-47부 : 상업용 전기끓임팬의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-48:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-48부 : 상업용 전기그릴과 토스트기에 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10010:2008 가정용 및 이와 유사한 전기기기의 안전성 - 새싹 및 콩나물 재배기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10009:2008 가정용 및 이와 유사한 전기기기의 안전성 - 초음파세척기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-3:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-3부 : 전기다리미의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-4:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-4부 : 전기탈수기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10017:2008 가정용 및 이와 유사한 전기기기의 안전성 - 애완동물 목욕기 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10016:2008 가정용 및 이와 유사한 전기기기의 안전성 - 물수건 포장기기 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10015:2008 가정용 및 이와 유사한 전기기기의 안전성 - 물수건 마는 기기 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station Input : below 600 V 소재지-1
IEC 61851-24:2014 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging Input : below 600 V 소재지-1
IEC 62040-1:2013 Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1 : General requirements AC 690 V, 250 A
DC 1 500 V, 400 A		 소재지-1
IEC 62196-2:2016 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2 : Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories AC 480 V or less
three phase 63 A or less
single phase 70 A or less		 소재지-1
IEC 62368-1:2010 Audio/video information and communication technology equipment - Part 1: Safety requirements AC/DC 600 V or less 소재지-1
IEC 62368-1:2014 Audio/video information and communication technology equipment - Part 1: Safety requirements AC/DC 600 V or less 소재지-1
IEC 62477-1:2012 Safety requirements for power electronic converter systems and equipment - Part 1: General Input : below 600 V 소재지-1
▶ 산업용 전기기기
ISO 15118-2:2014 Road vehicles - Vehicle - to - Grid Communication Interface - Part 2: Network and application protocol requirements L3 ~ L7 Of OSI7-Layer 소재지-1
▶ 가정용 전기기기
K 10002:2006 반신욕조 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10003:2006 발욕조 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10004:2008 가정용 및 이와 유사한 전기기기의 안전성 - 전기침대 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10007:2008 가정용 및 이와 유사한 전기기기의 안전성 - 전기정수기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10008:2011 가정용 및 이와 유사한 전기기기의 안전성 - 전기이온수기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-49:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-49부 : 상업용 전기보온찬장의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-50:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-50부 : 상업용 전기이중냄비의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-52:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-52부 : 전기 구강위생기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-29:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-29부 : 배터리충전기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-30:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-30부 : 실내용 난방기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-55:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-55부 : 수족관 및 정원연못용 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-56:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-56부 : 영사기 및 이와 유사한 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-82:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-82부 : 오락기기 및 개인용 서비스기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-84:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제 2-84부 : 화장실용전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA
힘 : 1 500 N 이하
(20 000 사이클 이하)		 소재지-1
KC 60335-2-88:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-88부 : 난방장치 환기장치 또는 에어컨디셔너시스템 등에 사용되는 가습기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-89:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-89부 : 내장형 또는 원격 냉각 압축기를 가진 상업용 냉동기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-90:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-90부: 상업용 전자레인지의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-91:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-91부 : 손수레식수지형 잔디 트리머 및 잔디에지 트리머의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-95:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-95부 : 주거용 수직개폐 차고문 구동장치의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-97:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-97부 : 회전식셔터, 차양, 블라인드 및 이와 유사한 구동장치의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-98:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-98부 : 전기 가습기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-99:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-99부: 상업용 전기 후드의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-101:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-101부 : 전기 훈증기에 관한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-102:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-102부: 전기를 사용하는 가스, 오일 및 고체연료 연소기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 61851-1:2020 전기차 충전시스템 제1부 : 일반 요구사항 입력전압 600 V 이하 소재지-1
KC 61851-22:2015 전기차 충전시스템 제22부 : 교류 충전장치 입력전압 600 V 이하 소재지-1
KC 61851-23:2018 전기차 충전시스템 - 제23부 : 직류 충전장치 입력전압 600 V 이하 소재지-1
KC 60335-2-28:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-28부 : 전기재봉기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-27:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-27부 : 피부관리용 자외선 및 적외선방사기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-53:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-53부 : 사우나용 전열기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-54:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-54부 : 액체 또는 증기 사용 가정용 표면청소기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-32:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-32부 : 전기 마사지 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-31:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-31부 : 레인지 후드의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-7:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-7부 : 세탁기의 개별 요구사항 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 60335-2-8:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-8부 : 면도기 이발기 및 이와 유사한 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-10:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-10부 : 마루청소기 및 물걸레청소기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-11:2021 가정용 및 이와 유사한 전기기기의 안전성 - 제2-11부 : 회전식건조기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-12:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-12부 : 보온플레이트 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-13:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-13부 : 전기 튀김기 전기 프라이팬 및 이와 유사한 기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-14:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-14부 : 주방기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-15:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-15부 : 액체가열용 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-16:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-16부 : 음식물쓰레기처리기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-17:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-17부 : 모포, 패드 및 이와 유사한 유연성을 가진 전열기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-21:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-21부 : 전기온수기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-23:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-23부 : 피부 손질 또는 모발 손질용 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-24:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-24부 : 전기냉장고, 아이스크림기기 및  제빙기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-25:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-25부 : 전자레인지의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-26:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-26부 : 전기시계의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-2:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-2부 : 전기 진공청소기 및 물 흡입 청소기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-71:2022 가정용 및 이와 유사한 전기기기의 안전성 - 제2-71부 : 동물부하 및 사육용 전열기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
ES 2501:2016 Audio, video and similar electronic apparatus - safety requirements 입력 : AC (3 ~ 450 V), 50 A 이하
온도 : 200 ℃ 이하
습도 : 25 ℃, 93 % R.H.
내전압 : 5 kV 이하
누설전류 : 50 mA		 소재지-1
KC 60335-2-70:2022 가정용 및 이와 유사한 전기기기의 안전성
- 제2-70부 : 전기착유기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-71:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-71부 : 동물부화 및 사육용 전열기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-72:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-72부 : 상업용 및 산업용 바닥처리 자동기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-73:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-73부 : 고정투입식전열기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-74:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-74부 : 이동형 수중히터의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-75:2025 가정용 및 이와 유사한 전기기기의 안전성
- 제2-75부 : 상업용 디스펜싱기기 및 자동판매기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-78:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-78부 : 야외용 전기바비큐기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-6:2022 가정용 및 이와 유사한 전기기기의 안전성
- 제2-6부 : 거치형 조리레인지 호브 오븐 및 이와 유사한 기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-6:2016 가정용 및 이와 유사한 전기기기의 안전성
- 제2-6부 : 거치형 조리레인지 호브 오븐 및 이와 유사한 기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
국가기술표준원 고시 제2021-0226호(2021.08.03) 안전확인대상생활용품의 안전기준
부속서 74 가정용 미용기기		 파장 범위 : (250 ~ 1 600) nm
온도 : 200 ℃ 이하		 소재지-1
GS-6130-0058 전주거치형 전기차 충전기
<제외항목>
5.2.12 종합연동시험		 입력 : (0 ~ 500) V, 80 A
출력 : (0 ~ 500) V, 80 A
온도 : 200 ℃
습도 : (5 ~ 95) % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
GS-6130-0057 전기버스용 급속충전기
<제외항목>
5.2.16 종합연동시험		 입력 : (0 ~ 500) V, 400 A
출력 : DC (0 ~ 1 000) V, DC 250 A
온도 : 200 ℃
습도 : (5 ~ 95) % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-69:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-69부 : 파워브러시가 부착된 공업용 및 상업용 건식·습식 전기 진공청소기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-68:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-68부 : 산업용과 상업용 분무기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-67:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-67부 : 상업용 및 산업용 바닥처리 청소기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-66:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-66부 : 물침대용 전열기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-65:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-65부 : 공기청정기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-64:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-64부 : 상업용 전기주방기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-63:2014 가정용 및 이와 유사한 전기기기의 안전성
- 제2-63부 : 상업용 전기 물 끓이기와 액체가 열기에 대한 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-62:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-62부 : 상업용 전기 헹굼 싱크의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-61:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-61부 : 축열식 실내용 난방기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-60:2022 가정용 및 이와 유사한 전기기기의 안전성
- 제2-60부 : 전기 기포발생욕조 및 이와 유사한 전기기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-59:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-59부 : 전기살충기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-58:2022 가정용 및 이와 유사한 전기기기의 안전성
- 제2-58부 : 상업용 전기 식기세척기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-79:2022 가정용 및 이와 유사한 전기기기의 안전성
- 제2-79부 : 산업용과 상업용의 고압청소기와 증기청소기에 대한 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-80:2022 가정용 및 이와 유사한 전기기기의 안전성
- 제2-80부 : 전기 팬(fan)의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
NTE INEN-IEC 60268-5:2007 Sound System equipment
- Part 5: Loud speakers		 Sensitivity : 50 mV/Pa
Frequency : 6.3 Hz ~ 20 kHz		 소재지-1
ABNT NBR NM 60335-1: 2010 Household and similar electrical appliances - Safety
- Part 1 : General requirements		 Input : (3 ~ 450) V, 50 A 소재지-1
GS-6130-0054 전기자동차용 급속충전기
<제외항목>
5.2.17 종합연동시험		 입력 : (0 ~ 500) V, 400 A
출력: DC (0 ~ 1 000) V, DC 250 A /
AC (0 ~ 500) V, 80 A
온도 : 200 ℃
습도 : (5 ~ 95) % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
GS-6130-0053 전기자동차용 충전스탠드
<제외항목>
5.2.13 종합연동시험		 입력 : (0 ~ 500) V, 80 A
출력 : (0 ~ 500) V, 80 A
온도 : 200 ℃
습도 : (5 ~ 95) % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-7:2021 가정용 및 이와 유사한 전기기기의 안전성
- 제2-7부 : 세탁기의 개별 요구사항		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-1:2010 Safety of household and similar electrical appliances
- Safety
- Part 1 : General requirements		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-7:2008 Household and similar electrical appliances - Safety
- Part 2-7 : Particular requirements for washing machines		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-11:2008 Household and similar electrical appliances - Safety
- Part 2-11 : Particular requirements for tumble dryers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-24:2010+A1:2012 Household and similar electrical appliances - Safety
- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-25:2010 Household and similar electrical appliances - Safety
- Part 2-25 : Particular requirements for microwave ovens, including combination microwave ovens		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-40:2013 Household and similar electrical appliances - Safety
- Part 2-40 : Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-1:2010+A1:2013 Safety of household and similar electrical appliances
- Safety
- Part 1 : General requirements		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-1:2020 Safety of household and similar electrical appliances
- Safety
- Part 1 : General requirements		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-100:2002 Household and similar electrical appliances - Safety - Part 2-100 : Particular requirements for hand-held mains-operated garden blowers, vacuums and blower vacuums Input : 250 V or less, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 60335-2-100:2020 가정용 및 이와 유사한 전기기기의 안전성 제2-100부 : 수지형(휴대용) 정원 송풍기 및 진공기(송풍기 및 진공기 겸용 포함)의 개별 요구사항 Input : 250 V or less, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 62368-1:2018 Audio/video information and communication technology equipment - Part 1: Safety requirements
<제외항목>
10.6.6 Acoustic 시험		 Less than AC/DC 600 V 소재지-1
IEC 60335-2-35:2020 Household and similar electrical appliances - Safety
- Part 2-35 : Particular requirements for instantaneous water heaters		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 60335-1:2016 가정용 및 이와 유사한 전기기기의 안전성
- 제1부: 일반요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 60335-2-32:2013 Household and similar electrical appliances - Safety
- Part 2-32 : Particular requirements for massage appliances		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-30:2009 Household and similar electrical appliances - Safety
- Part 2-30 : Particular requirements for room heaters		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-24:2025 Household and similar electrical appliances - Safety
- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 60335-2-80:2020 가정용 및 이와 유사한 전기기기의 안전성
- 제2-80부 : 전기 팬(fan)의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-44:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-44부 : 전기 주름 펴기에 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-43:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-43부 : 의류건조기 및 타월걸이의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-40:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-40부 : 히트펌프, 에어컨디셔너 및 제습기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 62368-1:2021 오디오/비디오 및 정보통신기기-
제1부 : 안전요구사항
<제외항목>
10.6.6 청취기기에 대한 요구 사항		 AC/DC 600 V 이하 소재지-1
KC 60335-2-31:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-31부 : 레인지 후드의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-25:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-25부 : 전자레인지의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-23:2015 가정용 및 이와 유사한 전기기기의 안전성
- 제2-23부 : 피부 손질 또는 모발 손질용 전기기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-15:2020 가정용 및 이와 유사한 전기기기의 안전성
- 제2-15부 : 액체가열용 전기기기의 개별 요구사항		 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
ABNT NBR IEC 60065:2009 Audio Video and similar electronic apparatus - Safety requirements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
▶ 의료기기
IEC 60601-1-11:2015 Medical electrical equipment
- Part 1-11 : General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment		 Acceleration : (15 ~ 100) g
Duration : 6 ms ~ 30 min
Acceleration amplitude : (10 ~ 2 000) Hz
Fall height : (0.01 ~ 0.25) m
Temperature : (-25 ~ 70) ℃
Humidity : (25 ~ 93) % R.H.
Atomspheric pressure : (700 ~ 1 060) hPa		 소재지-1
▶ 유/무선 통신기기
EN 300 220-1:2017 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement (25 ~ 1 000) MHz 소재지-1
EN 300 220-2:2025 Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz with power levels ranging up to 500 mW e.r.p.; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment (25 ~ 1 000) MHz 소재지-1
EN 300 328:2019 Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum		 30 MHz ~ 18 GHz 소재지-1
EN 300 330:2017 Short Range Devices (SRD);Radio equipment in the Frequency range 9 kHz to 25 MHz and inductive loop systems in the Frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU 9 kHz ~ 18 GHz 소재지-1
ANSI/USEMCSC C63.27-2021 American National Standard for Evaluation of Wireless Coexistence Frequency Range : 30 MHz ~ 6 GHz
(Exception : Annex C Multiple chamber test method)		 소재지-1
▶ 조명기기
경찰청, 바닥형 보행신호등 보조장치 표준지침(2022.07.20) 바닥형 보행신호등 보조장치 표준지침 미끄럼저항기 : (0 ~ 150) BPN
정하중 : Max. 5 kN
색도：(0.009 ~ 0.720)
휘도：(0 ~ 50 000) ㏅/㎡		 소재지-1
경찰청, LED 교통신호등 표준지침(2022.04.27) LED 교통신호등 표준지침

<제외항목>
2. 제어기 호환성 시험
3. 환경시험
(3) 광출력 변동 시험
(4) 내열성 충격성 시험
4. 전기시험
(9) 점소등 응답 시험
(10) 임피던스 시험
5. 광학 성능 시험
(2) 광도 분포 시험
(4) 썬팬텀 시험		 교류 250 V 이하
입력 전류 20 A 이하
절연저항 : (0 ~ 500) MΩ
휘도 : (0 ~ 500 000) cd/㎡		 소재지-1
IEC 61347-1:2015+AMD1:2017 Lamp control gear - Part 1 : General and safety requirements AC/DC 600 V or less 소재지-1
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 Lamp control gear - Part 2-1 : Particular requirements for starting devices (other than glow starters) AC 600 V or less 소재지-1
IEC 61347-2-2:2000+AMD1:2005+AMD2:2006 Lamp control gear - Part 2-2 : Particular requirements for d.c. or a.c. supplied electronic step-down converts or for filament lamps AC 600 V or less 소재지-1
IEC 61347-2-2:2011 Lamp control gear - Part 2-2 : Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps AC 600 V or less 소재지-1
IEC 61347-2-3:2011 Lamp control gear - Part 2-3 : Particular requirements for a.c. and/or d.c. supplied electronic ballasts for fluorescent lamps AC 600 V or less 소재지-1
IEC 62384:2020 DC or AC supplied electronic control gear for LED modules Performance requirements AC 600 V or less 소재지-1
IEC 62035:2014+AMD1:2016 Discharge lamps (excluding fluorescent lamps) - Safety specifications AC 600 V or less 소재지-1
IEC 62031:2018 LED modules for general lighting - Safety specifications DC 250 V or less or AC 600 V or less 소재지-1
IEC 61347-2-13:2014+AMD1:2016 Lamp control gear - Part 2-13 : Particular requirements for d.c. or a.c. supplied electronic control gear for LED modules AC 600 V or less 소재지-1
IEC 61347-2-12:2005+AMD1:2010 Lamp control gear - Part 2-12 : Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps(excluding fluorescent lamps) AC 600 V or less 소재지-1
IEC 61347-2-10:2000+AMD1:2008 Lamp control gear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) AC 600 V or less 소재지-1
IEC 61347-2-9:2012 Lamp control gear - Part 2-9: Particular requirements for electromagnetic control gear for discharge lamps (excluding fluorescent lamps) AC 600 V or less 소재지-1
IEC 61347-2-8:2000+AMD1:2006 Lamp control gear - Part 2-8: Particular requirements for ballasts for fluorescent lamps AC 600 V or less 소재지-1
IEC 61347-2-3:2011+AMD1:2016 Lamp control gear - Part 2-3 : Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamp AC 600 V or less 소재지-1
KC 60927:2015 시동장치 - 성능요구사항(글로우 스타터 제외) AC 600 V 이하 소재지-1
KC 60923:2015 방전램프용 안정기 - 성능요구사항(형광램프용 제외) AC 600 V 이하 소재지-1
KC 60921:2015 형광램프용 자기식안정기 - 성능요구사항 AC 600 V 이하 소재지-1
KC 60901:2025 단일 캡 형광램프 - 성능 AC 600 V 이하 소재지-1
KC 60838-2-2:2022 기타 램프홀더 제2-2부 : 개별 요구사항 - LED 모듈형 커넥터 AC 50 V 이하 소재지-1
KC 60838-2-1:2015 기타램프 소켓 제2-1부 : 램프소켓 S14에 대한 개별 요구사항 AC 250 V 소재지-1
KC 60662:2015 고압나트륨램프 - 성능 AC 600 V 이하 소재지-1
KC 60598-2-20:2022 등기구 제2-20부 : 체인형 조명기구 개별 요구사항 AC 250 V 이하 소재지-1
KC 60598-2-8:2021 등기구 제2-8부 : 손전등 - 개별요구사항 AC 250 V 이하 소재지-1
IEC 61347-1:2015 Lamp control gear - Part 1 : General and Safety Requirements AC/DC 600 V or less 소재지-1
IEC 61199:2011+AMD1:2012+AMD2:2014 Single-capped fluorescent lamps - Safety specifications AC 600 V or less 소재지-1
K 61184:2008 꽂음형 램프소켓 AC 600 V 이하 소재지-1
K 61347-2-10:2009 램프제어장치 : 제2-10부 고주파 냉음극방전관(네온관)용 전자식 인버터 및 컨버터에 대한 개별 요구사항 AC 600 V 이하 소재지-1
K 61347-2-12:2009 램프구동장치 : 제2-12부 방전램프용(형광램프 제외) DC/AC 전원공급 전자식 안정기에 대한 개별 요구사항 AC/DC 600 V 이하 소재지-1
KC 10023:2022 안정기내장형 LED램프 AC 250 V 이하 소재지-1
KC 10025:2022 형광램프대체형 LED램프 - 컨버터내장형 AC 250 V 이하 소재지-1
KC 10030:2019 LED조명시스템- 안전요구사항 1 000 W 이하 소재지-1
KC 20001:2015 직관형 LED램프 -컨버터 외장형 - 안전 및 성능 요구사항 G13 D12 cap 사용 직관형 램프 소재지-1
KC 60064:2025 가정용 및 이와 유사한 일반 조명용 텅스텐 필라멘트 백열 램프 - 성능 요구사항 AC 100 V ~ 250 V 소재지-1
KC 60081:2017 이중 캡 형광램프 - 성능 AC 600 V 이하 소재지-1
KC 60155:2015 형광등용 글로우 스타터 AC 600 V 이하 소재지-1
KC 60188:2015 고압수은 램프 - 성능 AC 600 V 이하 소재지-1
KC 60192:2015 저압나트륨 램프 - 성능 AC 600 V 이하 소재지-1
KC 60238:2015 에디슨 나사형 소켓 AC 600 V 이하 소재지-1
KC 60400:2021 형광램프 홀더 및 스타터 홀더 AC 600 V 이하 소재지-1
KC 60432-1:2015 백열전구 제1부 : 가정용 및 이와 유사한 조명 기기용 텅스텐 필라멘트 전구 AC 50 V ~ 250 V 소재지-1
K 10006:2006 PLS방식의 무전극 램프 안전 요구사항 AC 600 V 이하 소재지-1
K 10005:2011 무전극 형광램프에 관한 안전 요구사항 AC 600 V 이하 소재지-1
IEC 61047:2004 D.C. or A.C. supplied electronic step-down convertors for filament lamps - Performance requirements AC 600 V or less 소재지-1
IEC 61050:1991/AMD1:1994 Amendment 1 - Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 000 V(generally called neon-transformers). General and safety requirements AC 600 V or less 소재지-1
IEC 61167:2018 Metal halide lamps - Performance specification AC 600 V or less 소재지-1
IEC 61184:2017/AMD1:2019 Bayonet lamp holders AC 600 V or less 소재지-1
IEC 61195:1999+AMD1:2012+AMD2:2014 Double-capped fluorescent lamps - Safety specifications AC 600 V or less 소재지-1
KC 60598-2-5:2022 등기구 제2-5부 : 투광조명기구 개별요구사항 AC 600 V 이하 소재지-1
CIE 150-2017 Guide on the Limitation of the Effects of Obtrusive Light from Outdoor Lighting Installations, 2nd Edition AC 600 V or less
illuminance in vertical plane : < 25 lx		 소재지-1
IEC TR 62778:2014 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires Spectrum range : (380 ~ 780) nm 소재지-1
IEC 62471:2006 Photobiological safety of lamps and lamp systems Spectrum range : (250 ~ 1 600) nm 소재지-1
KC 61347-2-12:2022 램프구동장치 제2-12부: 방전램프용(형광램프 제외) DC/AC 전원공급 전자식 안정기에 대한 개별 요구사항 AC 600 V 이하 소재지-1
KC 60927:2022 시동장치 - 성능요구사항(글로우 스타터 제외) AC 600 V 이하 소재지-1
KC 60929:2022 교류입력 형광램프용 전자식안정기 - 성능요구사항 AC 600 V 이하 소재지-1
KC 61050:2022 무부하 출력전압이 1 000 V 초과하는 관형 방전램프용 변압기(네온변압기) - 일반 및 안전요구사항 AC 600 V 이하 소재지-1
KC 61347-1:2022 램프구동장치 - 제 1부 : 일반 및 안전요구사항 AC/DC 600 V 이하 소재지-1
KC 61347-2-8:2022 램프제어장치 - 제 2-8부 : 형광램프용 안정기에 대한 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-9:2022 램프구동장치 - 제 2-9부 : 방전등용 안정기 - 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-13:2022 제2-13부 - LED모듈용 DC/AC 구동장치 - 개별 요구사항 AC/DC 600 V 이하 소재지-1
KC 60838-2-2:2015 기타램프 소켓
제2-2부 : LED 모듈형 커넥터에 대한 개별요구사항		 AC 50 V 이하 소재지-1
KC 60598-2-20:2021 등기구 제2-20부 : 체인형 조명기구 개별요구사항 AC 250 V 이하 소재지-1
KC 60598-2-5:2021 등기구 제2-5부： 투광조명기구 개별요구사항 AC 600 V 이하 소재지-1
KC 60598-2-4:2021 등기구 제2-4부： 이동형 등기구 개별요구사항 AC 250 V 이하 소재지-1
KC 60598-2-2:2021 등기구 제2-2부 매입형 등기구 개별요구사항 AC 600 V 이하 소재지-1
KC 60598-2-1:2021 등기구 제2-1부：고정형 등기구 개별요구사항 AC 600 V 이하 소재지-1
IEC PAS 63313:2021 Position statement on germicidal UV-C irradiation UV-C safety guidelines Spectrum range : (250 ~ 280) nm 소재지-1
KC 60598-1:2015 등기구 제1부：일반요구사항 및 시험 AC 600 V 이하 소재지-1
KC 62031:2015 일반 조명용 LED 모듈 - 안전 요구사항 DC 250 V 이하 또는 AC 600 V 이하 소재지-1
KC 60968:2025 안정기 내장형 형광 램프 - 안전요구사항 AC 50 V ~ 250 V 소재지-1
KC 10025:2018 형광램프 대체형 LED 램프 - 컨버터 내장형 AC 250 V 이하 소재지-1
KC 10023:2020 안정기 내장형 LED 램프 AC 250 V 이하 소재지-1
CIE 117-1995 Discomfort glare in interior lighting AC 600 V or less
UGR : 10 ~ 28		 소재지-1
KC 60432-3:2015 백열전구 제3부 : 텅스텐 할로겐 램프 (비차량용) AC 250 V 이하 소재지-1
KC 60598-2-4:2022 등기구 제2-4부 : 이동형 등기구 개별요구사항 AC 250 V 이하 소재지-1
KC 60598-2-2:2022 등기구 제2-2부 : 매입형 등기구 개별요구사항 AC 600 V 이하 소재지-1
KC 60598-2-1:2022 등기구 제2-1부 : 고정형 등기구 개별요구사항 AC 600 V 이하 소재지-1
KC 60598-1:2022 등기구 제1부 : 일반요구사항 및 시험 AC 600 V 이하 소재지-1
KC 60570:2015 등기구 전원공급용 트랙시스템 1종 AC/DC 440 V 이하
3종 AC/DC 25 V 이하		 소재지-1
KC 60929:2015 교류입력 형광램프용 전자식안정기 - 성능요구사항 AC 600 V 이하 소재지-1
KC 60968:2022 안정기 내장형 형광 램프 - 안전요구사항 AC 50 V ~ 250 V 소재지-1
KC 62384:2014 LED모듈용 DC/AC 구동장치 - 성능 요구사항 AC 600 V 이하 소재지-1
KC 62035:2020 방전램프(형광램프제외) - 안전 AC 600 V 이하 소재지-1
KC 62031:2022 일반조명용 LED 모듈 - 안전 요구사항 DC 250 V 이하 또는 AC 600 V 이하 소재지-1
KC 61347-2-13:2015 제2-13부 - LED모듈용 DC/AC 구동장치 - 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-11:2015 램프구동장치 : 제 2-11부 기타조명기구용 전자회로의 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-9:2015 램프구동장치 - 제 2-9부 : 방전등용 안정기 - 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-8:2015 램프제어장치 - 제 2-8부 : 형광램프용 안정기에 대한 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-3:2015 램프구동장치 - 제 2-3부 : 교류입력 형광램프용 전자식 안정기 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-2:2025 램프구동장치 - 제 2-2부 : 필라멘트 램프용 직류 및 교류 입력 전자식 강압 컨버터의 개별 요구사항 AC 600 V 이하 소재지-1
KC 61347-2-1:2025 램프 구동 장치 - 제 2-1부 : 점호 장치의 개별 요구 사항(글로우 스타터 제외) AC 600 V 이하 소재지-1
KC 61347-1:2015 램프구동장치 - 제 1부 : 일반 및 안전요구사항 AC/DC 600 V 이하 소재지-1
KC 61199:2020 단일 캡 형광램프 - 안전 AC 600 V 이하 소재지-1
KC 61195:2020 이중 캡 형광램프 - 안전 AC 600 V 이하 소재지-1
KC 61167:2015 메탈 헬라이드 램프 AC 600 V 이하 소재지-1
KC 61050:2015 무부하 출력전압이 1 000 V 초과하는 관형 방전램프용 변압기(네온변압기) - 일반 및 안전요구사항 AC 600 V 이하 소재지-1
KC 60969:2015 안정기 내장형 램프 - 성능요구사항 AC 250 V 이하 소재지-1
K 61047:2008 필라멘트전구용 직류 또는 교류공급 전자식 강압 컨버터 - 성능 요구사항 AC 600 V 이하 소재지-1
K 60838-1:2011 기타 램프소켓 제1부 : 일반 요구사항과 시험 AC 600 V 이하 소재지-1
IEC 60357:2002/AMD3:2011 Amendment 3 - Tungsten Halogen Lamps(non-vehicle) - Performance Specifications AC 250 V or less 소재지-1
IEC 60400:2017/AMD1:2020 Lamp holders for Tubular Fluorescent Lamps and Starter holders AC 600 V or less 소재지-1
IEC 60968:2012 Self-Ballasted Lamps for General Lighting Services
- Safety Requirements		 AC 50 V ~ 250 V 소재지-1
IEC 60929:2011+AMD1:2015 AC and / or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements AC/DC 600 V or less 소재지-1
IEC 60927:2007+AMD1:2013 Auxiliaries for Lamps - Starting Devices (Other Than Glow Starters) - Performance Requirements AC 600 V or less 소재지-1
IEC 60923:2005+AMD1:2006 Auxiliaries for lamps-Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements AC 600 V or less 소재지-1
IEC 60921:2004+AMD1:2006 Ballasts for tubular fluorescent lamps Performance requirements AC 600 V or less 소재지-1
IEC 60901:1996/AMD6:2014 Amendment 6 - Single-Capped Fluorescent Lamps - Performance Specifications AC 600 V or less 소재지-1
IEC 60838-2-2:2006+AMD1:2012 Miscellaneous lamp holders - Part 2-2: Particular requirements Connectors for LED-modules AC 50 V or less 소재지-1
IEC 60838-2-1:1994/AMD2:2004 Amendment 2 - Miscellaneous lamp holders
- Part 2-1: Particular requirements - Lamp holders S14		 AC 250 V 소재지-1
IEC 60838-1:2016+AMD1:2017+AMD2:2020 Miscellaneous Lamp holders
- Part 1: General Requirements and Tests		 AC 600 V or less 소재지-1
IEC 60662:2011 High-Pressure Sodium Vapour Lamps - Performance specifications AC 600 V or less 소재지-1
IEC 60598-2-11:2013 Luminaires - Part2-11: Particular requirements - Aquarium luminaires AC 600 V or less 소재지-1
IEC 60598-2-8:2013 Luminaires - Part2-8: Particular requirements - Hand lamps AC 600 V or less 소재지-1
IEC 60598-2-4:2017 Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires AC 600 V or less 소재지-1
IEC 60598-2-3:2002+AMD1:2011 Luminaires  - Part 2-3: Particular requirements - Luminaires for road and street lighting AC 600 V or less 소재지-1
IEC 60598-2-2:2011 Luminaires  - Part 2-2: Particular requirements - Recessed luminaires AC 600 V or less 소재지-1
IEC 60598-2-2:1997 Luminaires  - Part 2: Particular requirements - Section 2: Recessed luminaires AC 600 V or less 소재지-1
IEC 60598-2-1:2020 Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires AC 600 V or less 소재지-1
IEC 60598-1:2020 Luminaires - Part 1: General requirements and tests AC 600 V or less 소재지-1
IEC 60570:2003+AMD1:2017+AMD2:2019 Electrical supply track systems for luminaires Fourth Edition Class Ⅰ AC/DC 440 V or less
Class Ⅲ AC/DC 25 V or less		 소재지-1
IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures (IP Code) AC 600 V or less 소재지-1
IEC 60432-1:1999+AMD1:2005+AMD2:2011 Incandescent lamps - Safety specifications
- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes		 AC 50 V ~ 250 V 소재지-1
KC 60432-2:2015 백열전구 제2부 : 가정용 및 이와 유사한 조명 기기용 텅스텐 할로겐 전구 AC 50 V ~ 250 V 소재지-1
KS C 7651:2025 컨버터 내장형 LED램프 AC 250 V 이하 소재지-1
KS C 7652:2022 컨버터 외장형 LED램프 AC/DC 50 V 이하 소재지-1
K 20002:2010 직관형 LED램프(컨버터 외장형)용 램프홀더 DC 50 V 이하 소재지-1
K 10021:2021 직관형 LED램프(컨버터외장형)용등기구 - 안전 요구사항 AC 250 V 이하 소재지-1
IEC 60969:2016 Self-ballasted compact fluorescent lamps for general lighting services - performance requirements AC 250 V or less 소재지-1
IEC 60968:2015 Self-ballasted fluorescent lamps for general lighting services - Safety requirements AC 50 V ~ 250 V 소재지-1
IEC 60238:2016/AMD2:2020 Edison Screw Lamp holders AC 600 V or less 소재지-1
IEC 60192:2001 Low-Pressure Sodium Vapour Lamps - Performance Specifications AC 600 V or less 소재지-1
IEC 60188:2001 High-Pressure Mercury Vapour Lamps - Performance Specifications AC 600 V or less 소재지-1
IEC 60155:1993+AMD2:2006 Amendment 2 - Glow-starters for fluorescent lamps AC 600 V or less 소재지-1
IEC 60112:2003+AMD1:2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials AC 600 V or less 소재지-1
IEC 60081:1997/AMD6:2017 Amendment 6 - Double-Capped Fluorescent Lamps - Performance Specifications AC 600 V or less 소재지-1
IEC 60064:1993/AMD5:2009 Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements AC 100 V ~ 250 V 소재지-1
KS C IEC 62035:2016 방전램프(형광램프 제외) - 안전 AC 600 V 이하 소재지-1
KS C 7653:2024 매입형 및 고정형 LED 등기구 AC 220 V 소재지-1
KS C 7655:2024 LED 모듈 전원공급용 컨버터 AC 220 V 소재지-1
KS C 7656:2021 이동형 LED/OLED 등기구 AC 220 V 소재지-1
KS C 7657:2021 LED 센서 등기구 AC 220 V 소재지-1
KS C 7658:2024 LED 가로등 및 보안등기구 AC 220 V 소재지-1
KS C 7659:2013 문자간판용 LED 모듈의 안전 및 성능 요구사항 DC 50 V 이하 소재지-1
KS C 7711:2021 LED 지중 매입등기구 AC 600 V 이하 소재지-1
KS C 7712:2024 LED 투광등기구 AC 600 V 이하 소재지-1
KS C 7713:2021 LED 경관등 AC 600 V 이하 소재지-1
KS C 7716:2024 LED 터널등기구 AC 600 V 이하 소재지-1
KS C IEC 61167:2018 메탈 헬라이드 램프 - 성능 사양 AC 600 V 이하 소재지-1
▶ 의료기기
IEC 60601-1:2012 Medicale electrical equipment
- Part 1 : General requirements for basic safety and essential performance		 Input Voltage : (0 ~ 520) Vac
Voltage : (0 ~ 1 000) Vac/Vdc
Input Current : 20 A
Current : 1 000 A
Input Frequency : (45 ~ 66) Hz
Input Temperature : (0 ~ 150) ℃
Temperature : (0 ~ 200) ℃
Input Humidity : 93 % R.H.
Humidity : 93 % R.H.
Distance : 3 000 ㎜
Resistance : 0.1 Ω
Radiation dose : 2 uR ~ 100 kR		 소재지-1
IEC 60601-1-3:2013 Medical electrical equipment
- Part 1-3 : General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment		 Distance : 3 000 ㎜
Tube Voltage : 18 kVp ~ 160 kVp
Tube Current : (1 ~ 2 000) mA
Illumination : 1 500 ㏓
Radiation dose : 2 uR ~ 100 kR		 소재지-1
IEC 60601-1-6:2013 Medical electrical equipment
- Part 1-6 : General requirements for basic safety and essential performance - Collateral standard : Usability		 Input Voltage : (0 ~ 520) Vac
Voltage : (0 ~ 1 000) Vac/Vdc
Input Current : 20 A
Current : 1 000 A
Input Frequency : (45 ~ 66) Hz		 소재지-1
IEC 60601-1-8:2012 Medical electrical equipment
- Part 1-8 : General requirements for basic safety and essential performance - Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical and medical electrical systems		 Illuminance : (100 ~ 1 500) lx
Frequency : (150 ~ 4 000) Hz
Sound level : (28 ~ 138) dBA		 소재지-1
IEC 60601-2-2:2017 Medical electrical equipment
- Part 2-2 : Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories		 HF leakage current : (0 ~ 150) mA
HF output : (0 ~ 400) W
Monitoring voltage : (1 ~ 12) V
Force : (11 ~ 50) N
AC impedance : (2 001 ~ 1 000 000) Ω		 소재지-1
IEC 60601-2-3:2016 Medical electrical equipment
- Part 2-3 : Particular requirements for the basic safety and essential performance of short-Wave therapy equipment		 Output : (0 ~ 500) W
time : (1 ~ 30) min		 소재지-1
IEC 60601-2-4:2018 Medical electrical equipment
- Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators		 Energy : (0.1 ~ 360) J
Load resistance : (25, 50, 75, 100, 125, 150, 175, 200) Ω
Time : (0.1 ~ 100.0) s
Voltage : (0 ~ 5) kVdc		 소재지-1
IEC 60601-2-5:2009 Medical electrical equipment
- Part 2-5 : Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment		 Ultrasonic output power : (1 ~ 30) W
Frequency : (1 ~ 10) MHz		 소재지-1
IEC 60601-2-22:2019 Medical electrical equipment
- Part 2-22 : Particular requirements for basic safety and essential performance of surgical cosmetic therapeutic and diagnostic laser equipment		 Laser power: 1 nW ~ 250 W
Laser energy : 100 µJ ~ 40 J		 소재지-1
IEC 60601-2-25:2011 Medical electrical equipment
- Part 2-25 : Particular requirements for the basic safety and essential performance of electrocardiographs		 Applied voltage : (0.1 ~ 10) mVp-v
Frequency : (0.05 ~ 500) Hz
Applied pulse duration : (2 ~ 300) ms
DC offset : ±1 000 mV		 소재지-1
IEC 60601-2-27:2011 Medical electrical equipment
- Part 2-27 : Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment		 Applied voltage : (0.1 ~ 10) mVp-v
Frequency : (0.05 ~ 500) Hz
Applied pulse Duration : (2 ~ 300) ms
DC offset : ±300 mV		 소재지-1
IEC 60601-2-28:2017 Medical electrical equipment
- Part 2-28 : Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis		 Input Voltage : (0 ~ 520) Vac
Voltage : (0 ~ 1 000) Vac/Vdc
Input Current : 20 A
Current : 1 000 A
Input Frequency : (45 ~ 66) Hz		 소재지-1
IEC 60601-2-34:2011 Medical electrical equipment
- Part 2-34 : Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment		 Pressure : (0 ~ 400) mmHg
Blood pressure :
Systolic (120 ~ 130) mmHg / diastolic (80 ~ 90) mmHg		 소재지-1
IEC 60601-2-37:2015 Medical electrical equipment - Part 2-37 : Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment Input Voltage : (0 ~ 520) Vac
Voltage : (0 ~ 1 000) Vac/Vdc
Input Current : 20 A
Current : 1 000 A
Input Frequency : (45 ~ 66) Hz
Ultrasonic output power : (1 ~ 30) W
Frequency : (1 ~ 40) MHz		 소재지-1
IEC 60601-2-49:2011 Medical electrical equipment
- Part 2-49 : Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment		 Voltage measure range :
(0.001 ~ 1 000) Vac
(0.001 ~ 1 000) Vdc
Time measure range : (0 ~ 30) s		 소재지-1
IEC 60601-2-54:2018 Medical electrical equipment
- Part 2-54 : Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

203.6.3.2.102 Linearity and constancy in RADIOGRAPHY  
b) Reproducibility of AUTOMATIC EXPOSURE CONTROLS for DIRECT RADIOGRAPHY
c) Constancy of AUTOMATIC EXPOSURE CONTROLS for DIRECT RADIOGRAPHY		 Distance : 3 000 ㎜
Tube Voltage : 35 kVp ~ 160 kVp
Tube Current : 1 mA ~ 2 000 mA
Radiation dose : 2 uR ~ 100 kR		 소재지-1
IEC 60601-2-57:2011 Medical electrical equipment
- Part 2-57 : Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use		 Laser power : 1 nW ~ 250 W
Laser energy : 100 µJ ~ 40 J		 소재지-1
IEC 60601-2-62:2013 Medical electrical equipment
- Part 2-62 : Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment		 Frequency : (1 ~ 10) MHz
Ultra sound Power : (0 ~ 30) W		 소재지-1
IEC 60601-2-63:2017 Medical electrical equipment
- Part 2-63 : Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment		 Distance : 3 000 ㎜
Tube Voltage : (35 ~ 105) kVp
Tube Current : (1 ~ 2 000) mA
Radiation dose : 2 uR ~ 100 kR		 소재지-1
IEC 62366:2014 Medical devices - Application of usability engineering to medical devices Input Voltage : (0 ~ 520) Vac
Voltage : (0 ~ 1 000) Vac/Vdc
Input Current : 20 A
Current : 1 000 A
Input Frequency : (45 ~ 66) Hz		 소재지-1
IEC 80601-2-30:2018 Medical electrical equipment
- Part 2-30 : Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomano meters		 Temperature : (10 ~ 40) ℃
Humidity : (15 ~ 85) %
Pressure : (0 ~ 360) mmHg
Acceleration : (15 ~ 100) g
duration : 6 ms ~ 30 min
acceleration amplitude : (10 ~ 2 000) Hz
Fall height : (0.01 ~ 0.25) m		 소재지-1
ISO 80601-2-61:2017 Medical electrical equipment
- Part 2-61 : Particular requirements for basic safety and essential performance of pulse oximeter equipment		 Acceleration : (15 ~ 100) g
duration : 6 ms ~ 30 min
acceleration amplitude : (10 ~ 2 000) Hz
Fall height : (0.01 ~ 0.25) m		 소재지-1
▶ 전자기적합성
KS C 9610-4-8:2017 전자파적합성(EMC) - 제4-8부: 시험 및 측정 기술 - 전원 주파수 자기장 내성 시험 최대자기장 :
(연속필드) 100 A/m
(짧은지속) 1 000 A/m		 소재지-1
KS C 9610-4-9:2019 전자파적합성(EMC)
- 제 4-9부 : 시험 및 측정 기술 - 임펄스 자기장 내성시험		 자기장 : 1 000 A/m 소재지-1
KS C IEC 61000-4-16:2013 전기자기적합성(EMC)
- 제 4-16부 ： 시험 및 측정방법 - 주파수 범위 0 Hz ~ 150 kHz에서 전도 및 공통모드 방해 내성시험		 Frequency range : 0 Hz ~ 150 kHz 소재지-1
KS C IEC 61000-4-14:2010 전기자기적합성(EMC)
- 제 4-14부 ： 시험 및 측정기술 - 상당 입력전류가 16 A 이하인 기기의 전압 변동 내성 시험		 Test level : U(nom), U(nom)-10 % U(nom), U(nom)+10 % U(nom) 소재지-1
KS C IEC 61000-4-13:2015 전자파적합성(EMC)
- 제 4-13부 ： 시험 및 측정기술 - 교류전원 포트에서 주전원 신호를 포함하는 고조파와 상호고조파, 저주파 내성 시험		 9차고조파 
Frequency range : 2 kHz / 50 Hz, 2.4 kHz / 60 Hz		 소재지-1
KS C IEC 61000-4-12:2006 전기자기적합성(EMC)
- 제 4-12부 ： 시험 및 측정 기술 - 링 웨이브 내성 시험		 Voltage oscillation frequency : 100 kHz ± 10 %
Open-circuit voltage : 250 to 4 kV
Short-circuit Current :333 A ± 10 % 12 Ω		 소재지-1
KS C IEC 60601-1-2:2020 의료용 전기기기 - 제1-2부 : 기본안전 및 필수 성능에 관한 일반 요구 사항 - 보조 표준 : 전자파 장해 - 요구사항 및 시험 전도성 방해 : 9 kHz ~ 30 MHz
방사성 방해 : 150 kHz ~ 18 GHz
정전기 방전 : ±15 kV
방사성 RF 전자기장 : 80 MHz ~ 6 GHz, 10 V/m
전기적 빠른 과도현상 : ±2 kV
서지 : ±2 kV
전도성 RF 전자기장 : 150 kHz ~ 80 MHz, 10 V
전원주파수 자기장 : 30 A/m
전압강하 및 순시정전 : ≤75 A
근접자기장 : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-1
KS C 9547:2020 일반 조명기기 - 전자파적합성(EMC) 내성 요구사항 ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-1
KS C 9610-6-4:2022 전자파적합성(EMC) - 제6-4부: 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-1
KS C 9610-6-3:2023 전자파적합성(EMC) - 제6-3부: 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A		 소재지-1
KS C 9610-6-2:2019 전자파적합성(EMC)
- 제6-2부 : 일반표준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-1
KS C 9610-6-1:2019 전자파적합성(EMC)
- 제6-1부 : 일반표준 - 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-1
KS C 9610-4-11:2020 전자파적합성(EMC) - 제4-11부: 시험 및 측정 기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 교류입력전류 : Max. 16 A (각 상당) 소재지-1
KS C 9610-4-6:2020 전자파적합성(EMC) - 제4-6부: 시험 및 측정 기술 - 전도성 RF 전자기장 내성 시험 Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-1
KS C 9610-4-5:2023 전자파적합성(EMC) - 제4-5부: 시험 및 측정 기술 - 서지 내성 시험 Voltage : ±7 kV 소재지-1
KS C IEC 61000-4-17:2010 전기자기적합성(EMC)
- 제 4-17부 ： 시험 및 측정기술- 직류 입력 전원 포트에서의 맥동 내성 시험		 Output voltage range up to 360 V 소재지-1
KS C 9811:2019 산업, 과학, 의료용(ISM)기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
<제외항목>
6.3.2.3항 표10 방사성 방해 허용기준 (거리 30 m)		 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
KS C 9814-1:2022 전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항
- 제1부：방출		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 30 MHz ~ 6 GHz		 소재지-1
KS C 9814-2:2022 전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항
- 제2부：내성		 ESD : ±30 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
MFS : 10 A/m
V-DIP : ≤75 A		 소재지-1
KS C 9815:2023 조명 기기 및 유사 기기의 무선
방해 특성 측정 허용기준과 측정
방법
<제외항목>
4.5.2항 표8의 방사성 방해 허용기준 중 3 m, 4 m 루프 측정		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
KS C 9610-3-2:2023 전자파적합성(EMC) - 제3-2부: 허용기준 - 고조파 전류의 허용기준 (상당 입력 전류 16 A 이하 기기) 교류입력전류 : Max 16 A (각 상당) 소재지-1
KS C 9610-3-3:2023 전자파적합성(EMC) - 제3-3부: 허용기준 - 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준 (상당 16 A 이하 기기) 교류입력전류 : Max 16 A (각 상당) 소재지-1
KS C 9610-3-11:2023 전자파적합성(EMC) - 제3-11부: 허용기준 - 공공 저압 배전망에서의 전압변동 및 플리커에 대한 허용기준 (상당 정격전류 75 A 이하와 조건부 연결 기기) 교류입력전류 : Max 75 A (각 상당) 소재지-1
KS C 9610-4-2:2017 전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성 시험 전압 : Max. 30 kV 소재지-1
KS C 9610-4-3:2017 전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성 시험 Freq. : 80 MHz ~ 6 GHz
E/F : 10 V/m		 소재지-1
KS C 9610-4-4:2020 전자파적합성(EMC) - 제4-4부: 시험 및 측정 기술 - 전기적 빠른 과도현상, 버스트 내성 시험 전압 : Max. 5.5 kV 소재지-1
TCVN 7186:2018 Limits and methods of measurement of radio  disturbance characteristics of electrical lighting and similar equipment RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
TCVN 7189:2009 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
TCVN 7317:2003 Information technology equipment - Immunity characteristics- Limits and methods of measurement ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 1 A/m
V-DIP ≤16 A		 소재지-1
TCVN 7492-1:2018 Electromagnetic compatibility -Requirements for household appliances, electric tools and similar apparatus Part 1: Emission RE : 30 MHz ~ 1 GHz
CE : 148.5 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz		 소재지-1
ANSI C 63.4a:2017 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 18 GHz		 소재지-1
FCC part 15:2024 Radio Frequency Device Subpart B - Unintentional Radiators

15.115 TV interface devices including cable system terminal devices		 RE : 30 MHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
IEEE 299:2006 Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures Frequency range : 9 kHz ~ 18 GHz 소재지-1
ASTM D4935-18 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials Frequency range : 30 MHz ~ 1.5 GHz 소재지-1
SANS 61000-6-2:2005 Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
SANS 61000-6-1:2005 Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 상당 16 A 이하		 소재지-1
SANS 61000-3-2:2009 Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) 16 A 이하 소재지-1
SANS 61000-3-3:2009 Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection 16A 이하
Pst < 1.0
Plt < 0.65
d(t) < 3.3 %
dc < 3.3 %
dmax : a) < 4 %, b) <6 %, c) < 7 %		 소재지-1
SANS 61000-3-11:2003 Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection 75 A 이하
Pst < 1.0
Plt < 0.65
d(t) < 3.3 %
dc < 3.3 %
dmax : a) < 4 %, b) <6 %, c) < 7 %		 소재지-1
SANS 61000-3-12:2012 Electromagnetic compatibility (EMC) Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase 교류입력전류 : Max. 75 A (각 상당) 소재지-1
SANS 61000-4-2:2009 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Max. ±30 kV, 150 ㎊/330 Ω 소재지-1
SANS 61000-4-3:2008 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test RS : 80 MHz ~ 6 GHz 소재지-1
SANS 61000-4-4:2011 Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EFT : Max ±4 kV 소재지-1
SANS 61000-4-5:2006 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test SURGE : Max ±6 kV 소재지-1
SANS 61000-4-6:2017 Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Frequency range : 150 kHz ~ 80 MHz
Voltage : 10 Vrms		 소재지-1
SANS 61000-4-8:2009 Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test M/F : Max 100 A/m 소재지-1
SANS 61000-4-9:2003 Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test Output current range : 100 A/m ~ 1 000 A/m 소재지-1
SANS 61000-4-11:2005 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests 상당 16 A 이하
0 % during 1/2 cycle
0 % during 1 cycle
40 % during 10/12 cycle
70 % during 25/30 cycle
80 % during 250/300 cycle
0 % during 250/300 cycle		 소재지-1
SANS 61000-4-13:2009 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests 9차고조파
Frequency range: 2 kHz / 50 Hz 2.4 kHz / 60 Hz		 소재지-1
SANS 61000-4-14:2009 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase Test level: U(nom) U(nom)-10 % U(nom) U(nom)+10 % U(nom) 소재지-1
SANS 61000-4-17:2009 Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test Output voltage range up to 360 V 소재지-1
SANS 62233:2006 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Frequency range : 1 Hz ~ 400 kHz 소재지-1
SANS 62040-2:2007 Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements CE : 150 kHz ~ 30 MHz
RE : 30 MHz~ 1 GHz
ESD : ± 8 kV
RS : 80 MHz~ 1 GHz
EFT : ±2 kV
SURGE : ±2kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
SANS 61547:2021 Equipment for general lighting purposes - EMC immunity requirements ESD : ±8 kV
RS : 80 MHz~ 1 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 상당 16 A 이하		 소재지-1
SANS 61326-2-3:2009 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning Use with: SANS 61326-1:2000 ESD : ±8 kV
RS : 80 MHz~ 3 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-1
SANS 61326-1:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MF : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
SANS 61000-6-4:2011 Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
SANS 61000-6-3:2011 Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
SANS 60601-1-2:2018 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 61000-4-8:2010 Electromagnetic compatibility(EMC)
- Part 4-8: Testing and measurement techniques - power frequency magnetic field immunity test		 M/F : 100 A/m 소재지-1
IEC 61000-6-1:2016 Electromagnetic Compatibility (EMC)
- Part 6-1: Generic Standards - Immunity for Residential, Commercial and Light-Industrial Environments		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 16 A per phase or less		 소재지-1
KS C 9040-2:2017 무정전전원장치(UPS)－제2부：전자기적합성(EMC) 요구사항 전도성 방해 : 150 kHz ~ 30 MHz
방사성 방해 : 30 MHz ~ 1 GHz
정전기 방전 : ±8 kV
방사성 RF 전자기장 : 80 MHz ~ 1 GHz
전기적 빠른 과도현상 : ±2 kV
서지 : ±2 kV
전도성 RF 전자기장 : 150 kHz ~ 80 MHz
전원주파수 자기장 : 30 A/m		 소재지-1
KS C 3369:2022 가전기기 및 유사 기기의 자기장 측정방법 Frequency range : 10 Hz ~ 400 kHz 소재지-1
IEC 60601-1-2:2014+AMD1:2020 Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbances - Requirements and tests		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 16 A per phase or less
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-1
IEC 61000-3-2:2018+AMD1:2020 Electromagnetic compatibility (EMC)
- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)		 16 A or less
40th harmonic		 소재지-1
IEC 61000-3-3:2013+AMD1:2017+AMD2:2021 Electromagnetic Compatibility (EMC)
- Part 3-3: Limits - Limitation of voltage changes voltage fluctuations and flicker in public Low-voltage supply systems for equipment With rated current less than or equal to 16 A per phase and not subject to conditional connection.		 16 A or less
Pst < 1.0
Plt < 0.65
d(t) < 500 ms
dc < 3.3 %
dmax : a) < 4 %, b) < 6 %, c) < 7 %		 소재지-1
IEC 61000-3-11:2017 Electromagnetic compatibility (EMC)
- Part 3-11: Limits - Limitation of voltage changes voltage fluctuations and flicker in public Low-voltage supply systems - Equipment With rated current ≤75 A and subject to conditional connection		 75 A or less
Pst < 1.0
Plt < 0.65
d(t) < 3.3 %
dc < 3.3 %
dmax : a) < 4 %, b) < 6 %, c) < 7%		 소재지-1
IEC 61000-4-2:2008 Electromagnetic Compatibility (EMC)
- Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test		 Max. ±30 kV, 150 ㎊/330 Ω 소재지-1
IEC 61000-4-3:2020 Electromagnetic compatibility (EMC)
- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test		 RS : 80 MHz ~ 6 GHz, 10 V/m 소재지-1
IEC 61000-4-4:2012 Electromagnetic compatibility (EMC)
- Part 4-4: Testing and measurement techniques -Electrical fast transient/burst immunity test		 EFT : ±4 kV 소재지-1
IEC 61000-4-5:2014+AMD1:2017 Electromagnetic Compatibility (EMC)
- Part 4-5: Testing and Measurement Techniques - Surge Immunity Test		 SURGE : ±6 kV 소재지-1
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields		 Frequency range : 150 kHz ~ 80 MHz
Voltage : Max. 10 Vrms		 소재지-1
IEC 61000-4-8:2009 Electromagnetic Compatibility (EMC)
- Part 4-8: Testing and Measurement Techniques - power Frequency Magnetic Field Immunity Test		 M/F : 100 A/m 소재지-1
IEC 61000-4-9:2016 Electromagnetic Compatibility (EMC)
- Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test		 Output current range 100 A/m ~ 1 000 A/m 소재지-1
IEC 61000-4-11:2020 Electromagnetic compatibility (EMC)
- Part 4-11: Testing and measurement techniques - Voltage dips short interruptions and voltage variations immunity tests		 16 A per phase or less
0 % during 1/2 cycle
0 % during 1 cycle
40 % during 10/12 cycle
70 % during 25/30 cycle
80 % during 250/300 cycle
0 % during 250/300 cycle		 소재지-1
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 Electromagnetic Compatibility (EMC)
- Part 4-13: Testing and Measurement Techniques - Harmonics and Inter harmonics Including Mains Signalling at A.C. power Port Low Frequency Immunity Tests		 9th harmonic
Frequency range : 2 kHz/ 50 Hz, 2.4 kHz/ 60 Hz		 소재지-1
IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 Electromagnetic Compatibility (EMC)
- Part 4-14: Testing and Measurement Techniques - Voltage Fluctuation Immunity Test		 Test level : U(nom), U(nom)-10 % U(nom), U(nom)+10 % U(nom) 소재지-1
IEC 61000-6-2:2016 Electromagnetic Compatibility (EMC)
- Part 6-2: Generic Standards - Immunity for Industrial Environments		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
CISPR 32:2015+AMD1:2019 Electromagnetic compatibility of multimedia equipment - Emission requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-1
SANS 2335:2018 Electromagnetic compatibility of multimedia equipment - Immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 5 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 1 A/m
V-DIP : 상당 16 A 이하		 소재지-1
IEC 61000-6-3:2020 Electromagnetic compatability (EMC)
- Part 6-3: Generic Standards - Emission Standard for equipment in residential environments		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
IEC 61000-6-4:2018 Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards Emission standard for industrial environments		 RE: 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
IEC 61326-1:2020 Electrical equipment for measurement control and laboratory use - EMC requirements
- Part 1: General requirements		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61326-2-1:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ± 8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-1
IEC 61326-2-2:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements  
- Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-1
IEC 61326-2-3:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers With integrated or remote signal conditioning		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-1
IEC 61326-2-4:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements  
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61326-2-5:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61326-2-6:2020 Electrical equipment for measurement control and laboratory use - EMC requirements 
- Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61547:2020 Equipment for general lighting purposes - EMC immunity requirements ESD : ±15 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 62040-2:2016 Uninterruptible power systems(UPS)
- Part 2 : Electromagnetic compatibility (EMC) requirements		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 62233:2005 Measurement methods for electromagnetic fields of household appliances and similar apparatus With regard to human exposure Frequency range : 10 Hz ~ 400 kHz 소재지-1
CISPR 11:2015+AMD1:2016+AMD2:2019 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
CISPR 14-1:2020 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus
- Part 1: Emission		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 6 GHz		 소재지-1
CISPR 14-2:2020 Electromagnetic Compatibility - Requirements for Household Appliances Electric Tools and Similar Apparatus
- Part 2: Immunity - Product Family Standard		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
V-DIP : 16 A per phase or less		 소재지-1
CISPR 15:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m
and 4 m)		 RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 Electromagnetic Compatibility (EMC)
- Part 4-17: Testing and Measurement Techniques - Ripple on d.c. Input power Port Immunity Test		 Output voltage range : 360 V or less 소재지-1
CISPR 35:2016 Electromagnetic compatibility of multimedia equipment - Immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 5 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 1 A/m
V-DIP : ≤ 75 A
SPL : 0.15 MHz ~ 1 GHz		 소재지-1
EN 61000-6-2:2019 Electromagnetic compatibility(EMC)
- Part 6-2: Generic standards - Immunity for industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ ６ GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 61000-6-1:2019 Electromagnetic compatibility(EMC)
- Part 6-1: Generic standards - Immunity for residential commercial and light-industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ ６ GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 55014-2:2021 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus
- Part 2: Immunity - Product family standard		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 55015:2019+A11:2020 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
EN 55032:2015+A1:2020 Electromagnetic compatibility of multimedia equipment - Emission Requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-1
EN 55035:2017+A11:2020 Electromagnetic compatibility of multimedia equipment - Immunity Requirements ESD : ±8 kV
RS : 80 MHz ~ 5 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 1 A/m
V-DIP : ≤ 75 A
SPL : 0.15 MHz ~ 1 GHz		 소재지-1
EN 60601-1-2:2015+A1:2021 Medical electrical equipment - Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbances - Requirements and tests RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 16 A per phase or less
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-1
EN 60947-1:2021 Low-voltage switchgear and controlgear- Part 1 : General rules 8.3 Electromagnetic compatibility (EMC) CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
MFE : 9 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-1
EN 61000-3-11:2019 Electromagnetic compatibility(EMC)
- Part 3-11: Limits - Limitation of voltage changes voltage fluctuations and flicker in public Low-voltage supply systems - Equipment With rated current ≤75 A and subject to conditional connection		 75 A 이하
Pst <1.0
Plt <0.65
d(t) <3.3 %
dc <3.3 %
dMax. : a) <4 % , b) <6 %, c) <7 %		 소재지-1
EN 61000-3-2:2019+A1:2021 Electromagnetic compatibility(EMC)
- Part 3-2: Limits - Limits for Harmonic Current Emissions(equipment input current ≤16 A per phase)		 16 A 이하 소재지-1
EN 61000-3-3:2013+A2:2021 Electromagnetic compatibility(EMC)
- Part 3-3: Limits - Limitation of voltage changes voltage fluctuations and flicker in public Low-voltage supply systems for equipment With rated current ess than or equal to 16 A per phase and not subject to conditional connection)		 16 A 이하
Pst <1.0
Plt <0.65
d(t) <3.3 %
dc <3.3 %
dMax. : a) <4 % , b) <6 %, c) <7 %		 소재지-1
EN 61000-4-11:2020 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase. 상당 16 A 이하
0 % during 1/2 cycle
0 % during 1 cycle
40 % during 10/12 cycle
70 % during 25/30 cycle
80 % during 250/300 cycle		 소재지-1
EN 61000-4-2:2009 Electromagnetic compatibility(EMC)
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test		 Max. ±30 kV, 150 ㎊/330 Ω 소재지-1
EN 61000-4-3:2020 Electromagnetic compatibility(EMC)
- Part 4-3: Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test		 RS : 80 MHz ~ 6 GHz, 10 V/m 소재지-1
EN 61000-4-4:2012 Electromagnetic compatibility(EMC)
- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test		 EFT : ±4 kV 소재지-1
EN 61000-4-5:2014+A1:2017 Electromagnetic compatibility(EMC)
- Part 4-5: Testing and measurement techniques - Surge immunity test		 SURGE : ±7 kV 소재지-1
EN 61000-4-6:2014 Electromagnetic compatibility(EMC)
- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances induced by radio- frequency fields		 Frequency range : 150 kHz ~ 80 MHz
Voltage : Max. 10 Vrms		 소재지-1
SANS 2332:2017 Electromagnetic compatibility of multimedia equipment - Emission requirements RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
SANS 215:2019 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
EN 55011:2016+A2:2021 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
EN 55014-1:2021 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus
- Part 1: Emission		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 6 GHz		 소재지-1
EN 61000-6-3:2021 Electromagnetic compatibility(EMC)
- Part 6-3: Generic standards - Emission standard for residential commercial and light - industrial environments		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
EN 61000-6-4:2019 Electromagnetic compatibility(EMC)
- Part 6-4: Generic standards - Emission standard for industrial environments		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
EN 61326-1:2021 Electrical equipment for measurement control and laboratory use - EMC requirements
- Part 1: General requirements		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-2:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-3:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers With integrated or remote signal conditioning		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-4:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-5:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-6 : Particular requirements - In vitro diagnostic(IVD) medical equipment		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61547:2009 Equipment for general lighting purposes. EMC immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 3 A/m
V-DIP : ≤16 A		 소재지-1
EN 62040-2:2018 Uninterruptible power systems(UPS)
- Part 2 : Electromagnetic compatibility (EMC) requirements		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
Portaria INMETRO nº377:2021 Approves the Technical Quality Regulation and Conformity Assessment Requirements for Televisions- Consolidated. CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-1
SANS 211:2010 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz		 소재지-1
SANS 214-1:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission RE : 9 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz		 소재지-1
SANS 214-2:2009 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity - Product family standard ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz
V-DIP : 상당16 A 이하		 소재지-1
KS X 3127:2024 간이무선국 및 TETRA 전자파적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하		 소재지-1
KS C 9974-10:2023 아크 용접 설비 - 제10부: 전자파적합성(EMC) 요구사항 RE : 30 MHz ~ 18 GHz
CE : 9 kHz~30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : 상당 16 A 이하		 소재지-1
KS X 3128:2024 디지털코드 없는 전화기 전자파적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3130:2024 음성 및 음향 신호 전송용 특정 소출력 무선기기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3131:2024 생활 무전기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3136:2024 아마추어 무선국 기기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3126:2024 무선데이터 통신시스템용 특정 소출력 무선기기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3139:2024 이동 위성 업무기기의 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS C IEC 61326-1:2008 계측제어 및 실험실 용도를 위한 전기기기-전자기적합성 요구사항 - 제 1부 ： 일반 요구사항 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MF : 30 A/m
V-DIP : 상당 16 A 이하기기		 소재지-1
CISPR 32:2012 Electromagnetic compatibility of multimedia equipment - Emission requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-1
EN 61000-4-9:2016 Electromagnetic compatibility(EMC)
- Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test		 Output current range : 100 A/m ~ 1 000 A/m 소재지-1
IEC 61326-2-5:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
EN 61326-2-6:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-6 : Particular requirements - In vitro diagnostic(IVD) medical equipment		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61000-6-2:2005 Electromagnetic compatibility(EMC)
- Part 6-2: Generic standards - Immunity for industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ ６ GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 61000-6-1:2007 Electromagnetic compatibility(EMC)
- Part 6-1: Generic standards - Immunity for residential commercial and light-industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ ６ GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 55014-2:2015 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus
- Part 2: Immunity - Product family standard		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 55032:2015 Electromagnetic compatibility of multimedia equipment - Emission Requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-1
EN 60601-1-2:2015 Medical electrical equipment - Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbances - Requirements and tests RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 상당 16 A 이하		 소재지-1
EN 61000-3-2:2019 Electromagnetic compatibility(EMC)
- Part 3-2: Limits - Limits for Harmonic Current Emissions(equipment input current ≤16 A per phase)		 16 A 이하 소재지-1
EN 61000-3-2:2014 Electromagnetic compatibility(EMC)
- Part 3-2: Limits - Limits for Harmonic Current Emissions(equipment input current ≤16 A per phase)		 16 A 이하 소재지-1
EN 61000-3-3:2013+A1:2019 Electromagnetic compatibility(EMC)
- Part 3-3: Limits - Limitation of voltage changes voltage fluctuations and flicker in public Low-voltage supply systems for equipment With rated current ess than or equal to 16 A per phase and not subject to conditional connection)		 16 A 이하
Pst <1.0
Plt <0.65
d(t) <3.3 %
dc <3.3 %
dMax. : a) <4 % , b) <6 %, c) <7 %		 소재지-1
EN 61000-3-3:2013 Electromagnetic compatibility(EMC)
- Part 3-3: Limits - Limitation of voltage changes voltage fluctuations and flicker in public Low-voltage supply systems for equipment With rated current ess than or equal to 16 A per phase and not subject to conditional connection)		 16 A 이하
Pst <1.0
Plt <0.65
d(t) <3.3 %
dc <3.3 %
dMax. : a) <4 % , b) <6 %, c) <7 %		 소재지-1
IEC 61326-1:2012 Electrical equipment for measurement control and laboratory use - EMC requirements
- Part 1: General requirements		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61326-2-1:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ± 8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-1
IEC 61326-2-2:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements  
- Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-1
IEC 61326-2-3:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers With integrated or remote signal conditioning		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-1
IEC 61326-2-4:2012 Electrical equipment for measurement, control and laboratory use - EMC requirements  
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
EN 61326-2-2:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 301 489-1 V.2.2.3(2019-11) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements;
Harmonised Standard for ElectroMagnetic Compatibility		 CE : 150 kHz ~ 30
MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80
MHz, 3 V
V-DIP : ≤ 75 A
H/F : ≤ 75 A
TI : -600 V ~ 300 V		 소재지-1
EN 55011:2016+A11:2020 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
EN 55014-1:2017+A11:2020 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus
- Part 1: Emission		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 6 GHz		 소재지-1
EN 61000-6-3:2007+A1:2011+AC:2012 Electromagnetic compatibility(EMC)
- Part 6-3: Generic standards - Emission standard for residential commercial and light - industrial environments		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61000-6-4:2007+A1:2011 Electromagnetic compatibility(EMC)
- Part 6-4: Generic standards - Emission standard for industrial environments		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-3:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers With integrated or remote signal conditioning		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-1:2013 Electrical equipment for measurement control and laboratory use - EMC requirements
- Part 1: General requirements		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
EN 61326-2-1:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 상당 16 A이하		 소재지-1
IEC 60601-1-2:2014 Medical electrical equipment
- Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbances - Requirements and tests		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61326-2-6:2012 Electrical equipment for measurement control and laboratory use - EMC requirements 
- Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-1
ABNT NBR IEC/CISPR 35:2021 Electromagnetic compatibility of multimedia equipment - Immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 5 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 1 A/m
V-DIP : ≤ 75 A
SPL : 0.15 MHz ~ 1 GHz		 소재지-1
ABNT NBR IEC/CISPR 11:2020 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
ABNT NBR IEC/CISPR 14-1:2021 Electromagnetic compatibility - Requirements for household appliances electric tools and similar apparatus
- Part 1: Emission		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 6 GHz		 소재지-1
ABNT NBR IEC/CISPR 15:2019 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m
and 4 m)		 RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
ABNT NBR IEC/CISPR 32:2021 Electromagnetic compatibility of multimedia equipment - Emission requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-1
ABNT NBR IEC 61000-4-2:2013 Electromagnetic Compatibility (EMC)
- Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test		 Max. ±30 kV, 150 ㎊/330 Ω 소재지-1
ABNT NBR IEC 61000-4-3:2022 Electromagnetic compatibility (EMC)
- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test		 RS : 80 MHz ~ 6 GHz, 10 V/m 소재지-1
ABNT NBR IEC 61000-6-3:2022 Electromagnetic compatability (EMC)
- Part 6-3: Generic Standards - Emission Standard for equipment in residential environments		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-1
ABNT NBR IEC 61000-4-6:2019 Electromagnetic compatibility (EMC)
- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields		 Frequency range : 150 kHz ~ 80 MHz
Voltage : Max. 10 Vrms		 소재지-1
ABNT NBR IEC 61000-4-5:2020 Electromagnetic Compatibility (EMC)
- Part 4-5: Testing and Measurement Techniques - Surge Immunity Test		 SURGE : ±6 kV 소재지-1
ABNT NBR IEC 61000-4-4:2015 Electromagnetic compatibility (EMC)
- Part 4-4: Testing and measurement techniques -Electrical fast transient/burst immunity test		 EFT : ±4 kV 소재지-1
IEC 61000-4-39:2017 Electromagnetic compatibility (EMC)
- Part 4-39 : Testing and measurement techniques - Radiated fields in close proximity - immunity test		 65 A/m, 300 V/m 소재지-1
산업통상자원부 고시 제2024-115호(2024.07.17) 전기자동차 충전기 기술기준
8.2.1 전자파적합성		 방사성 방해 : 2 kHz ~ 6 GHz
전도성 방해 : 9 kHz ~ 30 MHz
불연속 방해 : 150 kHz ~ 30 MHz
하모닉 : (2-40) 고주파
플리커 : 단상 ≤16 A
삼상 각 상당 ≤75 A
정전기 방전 : ±8 kV
방사성 RF 전자기장 : 80 MHz ~ 6 GHz, 10 V/m
전기적 빠른 과도현상 : ±2 kV
서지 : ±2 kV
전도성 RF 전자기장 : 150 kHz ~ 80 MHz, 10 V
전원주파수 자기장 : 200 A/m
전압강하 및 순시정전 : 0 %, 1 주기
40 %, 10/12 주기 (50/60) Hz
70 %, 25/30 주기 (50/60) Hz
0 %, 250/300 주기 (50/60) Hz
과도전압: 0~2 kV		 소재지-1
KS R IEC 61851-21-2:2018 전기자동차 전도성 충전시스템 — 제21-2부: 교류/직류 전원 전도성 접속의 전기자동차 요구사항 — 비탑재형 전기자동차 충전시스템에 대한 EMC 요구사항 방사성 방해 : 2 kHz ~ 6 GHz
전도성 방해 : 9 kHz ~ 30 MHz
불연속성 방해 : 150 kHz ~ 30 MHz
하모닉 : (2-40) 고주파
플리커 : 단상 ≤16 A
삼상 각 상당 ≤75 A
정전기 방전 : ±8 kV
방사성 RF 전자기장 : 80 MHz ~ 6 GHz, 10 V/m
전기장 빠른 과도현상 : ±4 kV
서지 : ±4 kV
전도성 RF 전자기장 : 150 kHz ~ 80 MHz, 10 V
전원주파수 자기장 : 200 A/m
전압강하 및 순시정전 : 0 %, 1 주기
40 %, 10/12 주기 (50/60) Hz
70 %, 25/30 주기 (50/60) Hz
0 %, 250/300 주기 (50/60) Hz
과도 전압 : 0~2 kV		 소재지-1
EN IEC 61851-21-2:2021 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems RE : 2 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
Harmonic : (2-40)
Flicker : Single phase ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 200 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
Transient voltage: 0~2 kV		 소재지-1
IEC 61851-21-2:2018 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems RE : 2 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
Harmonic : (2-40)
Flicker : Single phase ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 200 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
Transient voltage: 0~2 kV		 소재지-1
EN 61000-4-39:2017 Electromagnetic compatibility (EMC)
- Part 4-39 : Testing and measurement techniques - Radiated fields in close proximity - immunity test		 65 A/m, 300 V/m 소재지-1
KS C IEC 60669-2-1:2015 가정용 및 이와 유사한 용도의 고정 전기 설비용 스위치 - 제 2-1부: 개별 요구사항 - 전자 스위치
26절 전기자기적합성(EMC) 요구사항		 전도성 방해 : 9 kHz ~ 30 MHz
불연속성 방해 : 150 kHz ~ 30 MHz
방사성 방해 : 9 kHz ~ 6 GHz
하모닉 : (2-40) 고주파
플리커 :
단상 ≤16 A
삼상 각 상당 ≤75 A
정전기 방전 : ±8 kV
방사성 RF 전자기장 : 80 MHz ~ 6 GHz, 10 V/m
전기장 빠른 과도현상 : ±2 kV
서지 : ±2 kV
전도성 RF 전자기장 : 150 kHz ~ 80 MHz, 10 V
전원주파수 자기장 : 3 A/m
전압강하 및 순시정전 :
(10/12) 주기, (50/60) Hz @ 0 %,
(10/12) 주기, (50/60) Hz @ 40 %,
(10/12) 주기, (50/60) Hz @ 70 %		 소재지-1
EN IEC 60669-2-1:2022+AMD1:2022 Switches for household and similar fixed electrical installations -
Part 2-1: Particular requirements - Electronic control devices
Clause 26 EMC requirements		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
Harmonics : (2-40)
Flicker :
Single phase ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 3 A/m
V-DIP :
(10/12) cycle @ 0 %,
(10/12) cycles(50/60) Hz @ 40 %,
(10/12) cycles(50/60) Hz @ 70 %,		 소재지-1
IEC 60669-2-1:2021 Switches for household and similar fixed electrical installations -
Part 2-1: Particular requirements - Electronic control devices
Clause 26 EMC requirements		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
Harmonics : (2-40)
Flicker :
Single phase ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 3 A/m
V-DIP :
(10/12) cycle @ 0 %,
(10/12) cycles(50/60) Hz @ 40 %,
(10/12) cycles(50/60) Hz @ 70 %,		 소재지-1
KS X 3125:2024 특정 소출력 무선기기 전자파적합성 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3137:2024 무선 호출 기기 전자파적합성 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 상당 16 A 이하
TI : -600 V ~ 300 V		 소재지-1
KS X 3124:2024 무선기기의 공통 전자파적합성 시험방법 CE : 150 kHz ~ 30
MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80
MHz, 3 V
V-DIP : ≤ 75 A
H/F : ≤ 75 A
TI : -600 V ~ 300 V		 소재지-1
KS C 9835:2019 멀티미디어 기기 전자파 내성 시험방법 ESD : ±8 kV
RS : 80 MHz ~ 5 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 1 A/m
V-DIP : ≤ 75 A
SPL : 0.15 MHz ~ 1 GHz		 소재지-1
KS C 9832:2024 멀티미디어 기기 전자파 방해 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-1
KS X 3143:2020 가정용 무선전력 전송기기 장해방지 시험방법 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz		 소재지-1
KS C 9816-2-5:2020 전자파 장해 및 내성 측정장비와 측정방법 - 제2-5부: 대형기기에서 발생하는 방해 방출의 현장 측정 주파수범위 : 9 kHz ~ 18 GHz 소재지-1
KS C 9816-2-4:2017 전자파 방해 및 내성 측정장비와 측정방법 - 제2-4부: 전자파 방해 및 내성 측정방법 - 내성 측정 주파수범위 : 150 kHz ~ 18 GHz 소재지-1
KS C 9816-2-3:2020 전자파 방해 및 내성 측정장비와 측정방법 - 제2-3부: 전자파 방해 및 내성 측정방법 - 방사성 방해 측정 주파수범위 : 9 kHz ~ 18 GHz 소재지-1
KS C 9816-2-2:2020 전자파 방해 및 내성 측정장비와 측정방법 - 제2-2부: 전자파 방해 및 내성 측정방법 - 방해전력 측정 주파수범위 : 30 MHz ~ 1.0 GHz 소재지-1
KS C 9816-2-1:2023 전자파 방해 및 내성 측정장비와 측정방법 - 제2-1부: 전자파 방해 및 내성 측정방법 - 전도성 방해 측정 주파수범위 : 9 kHz ~ 1.0 GHz 소재지-1
KS C 9816-1-5:2023 전자파 방해 및 내성 측정장비와 측정방법 - 제1-5부: 전자파 방해 및 내성 측정장비 - 5 MHz~18 GHz의 안테나교정시험장 및 기준시험장 주파수범위 : 30 MHz ~ 1.0 GHz 소재지-1
KS C 9816-1-4:2020 전자파 방해 및 내성 측정장비와 측정방법 - 제1-4부: 전자파 방해 및 내성 측정장비 - 방사성 방해 측정용 안테나 및 시험장 주파수범위 : 9 kHz ~ 18 GHz 소재지-1
KS C 9816-1-3:2022 전자파 방해 및 내성 측정장비와 측정방법 - 제1-3부: 전자파 방해 및 내성 측정장비 - 측정용 보조장비 - 방해전력 주파수범위 : 30 MHz ~ 1.0 GHz 소재지-1
KS C 9816-1-2:2022 전자파 방해 및 내성 측정장비와 측정방법 - 제1-2부: 전자파 방해 및 내성 측정장비 - 전도성 방해 측정용 보조장비 주파수범위 : 9 kHz ~ 1.0 GHz 소재지-1
KS C 9816-1-1:2022 전자파 방해 및 내성 측정장비와 측정방법 - 제1-1부: 전자파 방해 및 내성 측정장비 - 측정장비 주파수범위 : 9 kHz ~ 18 GHz 소재지-1
▶ 소프트웨어
ETSI TS 103 645 V3.1.1 (2024-01) CYBER; Cyber Security for Consumer Internet of Things: Baseline Requirements - 소재지-1
ETSI TS 103 701 V2.1.1 (2025-05) CYBER; Cyber Security for Consumer Internet of Things: Conformance Assessment of Baseline Requirements - 소재지-1
IEC TR 60601-4-5:2021 Medical electrical equipment - Part 4-5: Guidance and interpretation - Safety-related technical security specifications - 소재지-1
IEC 81001-5-1:2021 Health software and health IT systems safety, effectiveness and security Part 5-1: Security Activities in the product life cycle - 소재지-1
ETSI EN 303 645 V3.1.3 (2024-09) Cyber Security for Consumer Internet of Things: Baseline Requirements - 소재지-1
CTIA Cybersecurity Certification Test Plan for IoT Devices Version 2.2 Cybersecurity Certification Test Plan for IoT Devices - 소재지-1
KS C 5078:2015 자동차용 사고영상 기록장치
- 7.2.4.2 사고기록 정보의 무결성 기능 검증		 - 소재지-1
IEC 62304:2006+AMD1:2015 Medical device software - Software life cycle processes - 소재지-1
IEC 62443-2-4:2023 Security for industrial automation and control systems - Part 2-4: Security program requirements for IACS service providers - 소재지-1
과학기술정보통신부 고시 제2024-41호(2024.10.29.) 소프트웨어 품질인증 운영에 관한 지침 - 소재지-1
MISRA C:2004 Guidelines for the use of the C language in critical systems - 소재지-1
EN 50128/A2:2020 Railway Applications-Communications, signalling and processing systems-Software for railway control and protection systems
7.5.4.7. b),
Table A.12, Table A.13, Table A.19, Table A.21 1,2,		 - 소재지-1
ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing - 소재지-1
ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality  Requirements and Evaluation(SQuaRE) - Measurement of data quality - 소재지-1
ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of system and software product quality - 소재지-1
ISO/IEC 25021:2012 Systems and software engineering - Systems and software Quality  Requirements and Evaluation(SQuaRE) - Quality measure elements - 소재지-1
ISO/IEC 18045:2022 Information technology - Security techniques - Methodology for IT security evaluation - 소재지-1
ISO/IEC 15408-3:2022 Information technology - Security techniques - Evaluation criteria for IT security
- Part 3 : Security assurance components		 - 소재지-1
ISO/IEC 15408-2:2022 Information technology - Security techniques - Evaluation criteria for IT security
- Part 2 : Security functional components		 - 소재지-1
ISO/IEC 15408-1:2022 Information technology - Security techniques - Evaluation criteria for IT security
- Part 1 : Introduction and general model		 - 소재지-1
IEC 62443-4-2:2019 Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components - 소재지-1
IEC 62443-4-1:2018 Security for industrial automation and control systems - Part 4-1: Secure product development lifecycle requirements - 소재지-1
IEC 62443-3-3:2013 Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels - 소재지-1
KS X ISO/IEC 15408-1:2005 정보기술 - 보안기술 - 정보기술 보안 평가기준
- 제1부 : 개요와 일반모델		 - 소재지-1
KS X ISO/IEC 15408-2:2008 정보기술 - 보안기술 - 정보기술 보안 평가기준
- 제2부 : 보안기능 컴포넌트		 - 소재지-1
KS X ISO/IEC 15408-3:2008 정보기술 - 보안기술 - 정보기술보안 평가기준
- 제3부: 보안보증컴포넌트		 - 소재지-1
KS X ISO/IEC 18045:2008 정보기술 - 보안 기술 - 정보 기술 보안 평가 방법론 - 소재지-1
KS X ISO/IEC 25051:2014 소프트웨어 공학 - 시스템 및 소프트웨어 품질 요구사항 및 평가(SQuaRE) - 즉시 사용 가능한 소프트웨어 제품(RUSP)의 품질 요구사항 및 테스팅 지침 - 소재지-1
KS X IEC 62443-4-2:2019 산업제어시스템 보안 - 제4-2부: 산업제어시스템 컴포넌트의 기술적 보안 요구사항 - 소재지-1
KS X ISO/IEC 25023:2016 시스템 및 소프트웨어 공학 - 시스템 및 소프트웨어 품질 요구사항 및 평가(SQuaRE) - 시스템 및 소프트웨어 제품 품질 측정 - 소재지-1
KS C IEC 62990-1:2019 작업장 분위기 - 제1부: 가스 검지기 - 독성 가스용 검지기의 성능 요구사항
4.2.9 소프트웨어 제어 기기
5.4.10 소프트웨어 제어 기기		 - 소재지-1
IEC 62990-1:2019 Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases
4.2.9 Software-controlled equipment
5.4.10 Software-controlled equipment		 - 소재지-1
IEC 61508-3:2010 Functional safety of electrical / electronic / programmable electronic safety related systems - Part 3 : Software requirements
7.4.7, 7.4.8
Table B.1, Table B.2, Table B.8 1,2,3,4,5,9		 - 소재지-1
IEC 62279:2015 Railway Applications-Communications, signalling and processing systems-Software for railway control and protection systems
7.5.4.7 a), b),
7.5.4.8, 
Table A.12, Table A.13 6, Table A.19 3,4		 - 소재지-1
IEC 82304-1:2016 Health software - Part 1 : General requirements for product safety - 소재지-1
▶ 에너지효율
IEC 62885-4:2020 Surface cleaning appliances -
Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance		 Suction power : (0 ~ 500) W 소재지-1
IEC 62552-3:2015+AMD1:2020 Household Refrigerating Appliances - Characteristics And Test Methods Part 3 : Energy consumption and volume 10 kW or less 소재지-1
IEC 62552-2:2015+AMD1:2020 Household Refrigerating Appliances - Characteristics And Test Methods Part 2 : Performance requirements 10 kW or less 소재지-1
IEC 62552-1:2015+AMD1:2020 Household Refrigerating Appliances - Characteristics And Test Methods Part 1 : General Requirements 10 kW or less 소재지-1
KS C IEC 62301:2017 가정용 전기기기의 대기전력 측정방법 500 W 이하 소재지-1
KS C IEC 62552:2007 가정용 냉장기기 - 특성 및 시험방법 (0 ~ 600) V
(0 ~ 20) A		 소재지-1
IEC 62087:2011 Methods of measurement for the power consumption of audio video and related equipment (0 ~ 2 200) W 소재지-1
IEC 62087-1:2015 Audio, video, and related equipment - Determination of power consumption - Part 1: General (0 ~ 2 200) W 소재지-1
IEC 62087-2:2023 Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media (0 ~ 2 200) W 소재지-1
IEC 62087-3:2023 Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets (0 ~ 2 200) W 소재지-1
IEC 62087-4:2015 Audio, video, and related equipment - Determination of power consumption - Part 4: Video recording equipment (0 ~ 2 200) W 소재지-1
IEC 62087-5:2015 Audio, video, and related equipment - Determination of power consumption - Part 5: Set top boxes(STB) (0 ~ 2 200) W 소재지-1
IEC 62087-6:2015 Audio, video, and related equipment - Determination of power consumption - Part 6: Audio equipment (0 ~ 2 200) W 소재지-1
IEC 62552:2007 Household refrigerating appliances - Characteristics and test methods 10 kW or less 소재지-1
IEC 62301:2011 Household electrical appliances - Measurement of standby power 500 W or less 소재지-1
기후에너지환경부 고시 제2026-25호(2026.05.27) 대기전력저감 프로그램운용규정
 별표1의 3. 프린터
 별표1의 5. 복사기
 별표1의 6. 스캐너
 별표1의 8. 자동 절전 제어장치
 별표1의 10. 오디오
 별표1의 11. DVD플레이어
 별표1의 12. 라디오카세트
 별표1의 13. 전자레인지
별표1의 15. 도어폰
 별표1의 16. 유무선전화기		 3 000 W 이하
5 000 W 이하
1 000 W 이하
-
1 000 W 이하
150 W 이하
1 000 W 이하
4 000 W 이하
100 W 이하
150 W 이하		 소재지-1
기후에너지환경부 고시 제2026-137호
(2026.05.27.)		 효율관리기자재의 운용규정
 별표1의 1 전기냉장고
 별표1의 3 김치냉장고
 별표1의 11 전기진공청소기
 별표1의 14 백열전구
 별표1의 15 형광램프
 별표1의 17 안정기내장형램프
 별표1의 20 어댑터․충전기
 별표1의 22 상업용전기냉장고
 별표1의 26 텔레비전수상기
 별표1의 28 전기스토브
 별표1의 37 셋톱박스
 별표1의 38 컨버터 내장형 LED 램프
 별표1의 39 컨버터 외장형 LED 램프
별표1의 47 직관형 LED 램프(컨버터 외장형)
별표1의 49 컴퓨터
별표1의 50 복합기		 1 000 L 이하
1 000 L 이하
800 W 이상 ~ 2 500 W 이하
25 W 이상 ~ 150 W 이하
13 W 이상 ~ 55 W 이하
5 W 이상 ~ 60 W 이하
150 W 이하
300 L 이상 ~ 2 000 L 이하
47 cm 이상 ~ 216 cm 이하
500 W 이상 ~ 10 kW 이하
150 W 이하
AC 1 000 V 이하
AC 1 000 V 이하
22 W 이하
-
5 000 W 이하		 소재지-1
NTE INEN 2206:2019 Household refrigerating appliances Requirements and test methods (0 ~ 600) V
(0 ~ 20) A		 소재지-1
RTE INEN 035:2009 Energy efficiency in refrigeration appliances for household use. Report power consumption test methods and labeling (0 ~ 600) V
(0 ~ 20) A		 소재지-1
SASO 2664:2017 Energy Performance and Capacity of Household Refrigerators, Refrigerators - Freezers and Freezers (0 ~ 600) V
(0 ~ 20) A		 소재지-1
SASO 2870:2018 ENERGY EFFICIENCY, FUNCTIONALITY AND LABELLING REQUIREMENTS FOR LIGHTING PRODUCTS -  PART 1 Indirect and direct general light sources having a luminous flux above 60 lumens or  below 12 000 lumens of the following technologies:
ㆍIncandescent lamps
ㆍCompact fluorescent lamps with integrated ballast(CFLi)
ㆍHalogen lamps
ㆍLight-emitting diode(LED) lamps (Incandescent retrofit types)
ㆍLight-emitting diode(LED) lamps (Halogen retrofit types)		 소재지-1
SASO 2902:2018 ENERGY EFFICIENCY, FUNCTIONALITY AND LABELLING REQUIREMENTS FOR LIGHTING PRODUCTS  PART 2 Lamps and luminaires with a luminous flux above 60 lumens, and control gears(ballasts)
ㆍIncandescent lamps with a luminous flux above 12 000 lumens
ㆍHalogen lamps with a luminous flux above 12 000 lumens
ㆍCompact fluorescent lamps with integrated ballast(CLFi) with a luminous flux above 12 000 Lumens
ㆍCompact fluorescent lamps without integrated ballast(CFLni)
ㆍFluorescent Lamps(all types)
ㆍHigh Intensity Discharge Lamps, such as: Mercury Vapour Lamps, High/Low Pressure Sodium Lamps, Quartz Metal Halide Lamps, Ceramic Metal Halide Lamps
ㆍLED Lamps (including retrofit LED lamps with a luminous flux above 12 000 Lumens))		 소재지-1
TCVN 7828:2016 Refrigerator refrigerator - freezer - Energy Efficiency (0 ~ 600) V
(0 ~ 20) A		 소재지-1
TCVN 7829:2016 Refrigerator refrigerator - freezer - Method for determination of energy Efficiency (0 ~ 600) V
(0 ~ 20) A		 소재지-1
TCVN 9508:2012 Computer monitors. Energy Efficiency Ratio Input Voltage : 230 V,
Input Power : Max. 1 000 W,
Frequency : 50 Hz		 소재지-1
TCVN 9536:2012 Television sets. Energy efficiency Input Voltage : 230 V,
Input Power : Max. 1 000 W,
Frequency : 50 Hz		 소재지-1
TCVN 9537:2012 Television sets. Method for determination of energy efficiency Input Voltage : 230 V,
Input Power : Max. 1 000 W,
Frequency : 50 Hz		 소재지-1
산업통상자원부 고시 제2021-68호(2021.04.20) 고효율에너지기자재 보급촉진에 관한 규정
 별표1의 9. LED유도등
 별표1의 15. 문자간판용LED모듈
 별표1의 20. 등기구





 별표1의 21.  LED램프		 5 W 이하
DC 50 V 이하
AC 220 V, 60 Hz(실내용,실외용)
AC 1 000 V 이하, 700 W 또는 1 000 W (PLS 등기구)
AC 220 V, 60 Hz, 150 W 이하(초정압방전램프등기구)
AC 220 V, 60 Hz(무전극형광램프용등기구)
22 W 이하(직관형LED램프)
55 W 이하(형광램프 대체형 LED램프)		 소재지-1
RTE INEN 117:2014 Energy efficiency in Television. Energy report test method and labeling (0 ~ 5) kW 소재지-1
IEC 60312-1:2010+AMD1:2011 Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance Suction power : (0 ~500) W 소재지-1
ES 7993:2018 Energy Efficiency Label For Televisions And Displays Power: (0 ~ 2 200) W 소재지-1
▶ 금속 및 관련제품
KS B 0802:2003 금속 재료 인장 시험 방법 (0 ∼ 1 000) kN 소재지-2
ASTM E399-24 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

ANNEXES A5 SPECIAL REQUIREMENTS FOR TESTING DISK-SHAPED COMPACT SPECIMENS
ANNEXES A6 SPECIAL REQUIREMENTS FOR TESTING ARC-SHAPED TENSION SPECIMENS
ANNEXES A7 SPECIAL REQUIREMENTS FOR TESTING ARC-SHAPED BEND SPECIMENS		 (0 ~ 100) kN
(-70 ~ 150) ℃
Compact C(T) or Bend SE(B)		 소재지-2
ASTM E238-17a Standard Test Method for Pin-Type Bearing Test of Metallic Materials (0 ~ 200) kN 소재지-2
ASTM B769-25 Standard Test Method for Shear Testing of Aluminum Alloys (0 ~ 200) kN 소재지-2
ASTM E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature (0 ~ 1 000) kN 소재지-2
▶ 시멘트 및 관련제품
KS F 2730:2008 콘크리트 압축강도 추정을 위한 반발경도 시험방법 (15 ~ 45) MPa 소재지-2
▶ 플라스틱 및 관련제품
ASTM D790-25 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (0 ~ 200) kN 소재지-2
ASTM D3846-08(2015) Standard Test Methods for In-Plane Shear Strength of Reinforced Plastics (0 ~ 200) kN 소재지-2
ASTM D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite (0 ~ 200) kN 소재지-2
ASTM D792-20 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (0 ~ 200) g 소재지-2
ASTM D7137/D7137M-23 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates (0 ~ 200) kN, (3 ~ 300) J 소재지-2
ASTM D7136/D7136M-25 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event (0 ~ 200) kN,
(3 ~ 300) J		 소재지-2
ASTM D695-26 Standard Test Method for Compressive Properties of Rigid Plastics (0 ~ 200) kN 소재지-2
ASTM D6742/D6742M-23 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates (0 ~ 200) kN 소재지-2
ASTM D6641/D6641M-23 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture (0 ~ 200) kN 소재지-2
ASTM D6484/D6484M-23 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates (0 ~ 200) kN 소재지-2
ASTM D3039/D3039M-17 (2025) Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials (0 ~ 200) kN 소재지-2
ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) (0 ~ 200) kN 소재지-2
ASTM D2344/D2344M-22 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates (0 ~ 200) kN 소재지-2
ASTM D5961/D5961M-23 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates (0 ~ 200) kN 소재지-2
ASTM D3165-07-2023 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies (0 ~ 200) kN 소재지-2
ASTM D3479/D3479M-19(Reapproved 2023) Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials (0 ~ 200) kN 소재지-2
ASTM D3518/D3518M-18 (2025) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45 ° Laminate (0 ~ 200) kN 소재지-2
ASTM D5379/D5379M-19 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method (0 ~ 200) kN 소재지-2
ASTM D5766/D5766M-23 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates (0 ~ 200) kN 소재지-2
ASTM D7078/D7078M-20ε1 (2025) Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method (0 ~ 200) kN 소재지-2
ASTM D7028-07(Reapproved 2024) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) (Room temperature ~ 450) ℃ 소재지-2
ASTM D3171-22 Standard Test Methods for Constituent Content of Composite Materials (0 ~ 200) g 소재지-2
▶ 측정용 기계기구
KS M 0011:2013 수용액의 pH 측정 방법
7.1절, 8절		 (4 ~ 10) pH (25 ℃) 소재지-2
KS I 8001:2024 전기 전도율 측정 방법 통칙
8.1 절		 (0.05 ~ 10 000) μS/cm  (25 ℃) 소재지-2
▶ 산업용 기계
KS B ISO 10218-1:2011 로봇 및 로봇장치 ─ 산업용 로봇의 안전에 관한 요구사항 ─ 제1부：로봇

5.6.2 감속 제어 운전		 속도 : 250 mm/s 이하 소재지-2
KS B ISO 230-2:2014 공작기계 시험방법 - 제2부: 수치제어에 의한 위치결정 정확정밀도 및 반복정밀도 결정

5.3.2 2 000 mm 이하의 직선축
5.3.3 2 000 mm 초과의 직선축
5.3.4 360° 이하의 회전축
5.3.5 360° 초과의 회전축		 측정 거리 : (0 ~ 10 000) mm
회전 각도 : 1 800° 이하		 소재지-2
KS B ISO 9283:1998 산업용 머니퓰레이팅 로봇 - 성능 항목 및 시험방법

7.2 포즈 정확도 및 포즈 반복 정밀도
7.3 거리 정확도 및 반복 정밀도		 측정 거리 : (0.3 ~ 10) m
수평(수직) 측정 각도 : -45° ~ 45°		 소재지-2
행정안전부 고시 제2022-18호(2022.03.02) 승강기안전부품 안전기준 및 승강기 안전기준 [별표 5] 추락방지 안전장치 안전기준 (KC 1030-04 : 2022)
<제외항목>
5.2 즉시 작동형 추락방지안전장치		 속도: 5.0 m/s 이하
중량: (200 ~ 6 800) kg		 소재지-2
행정안전부 고시 제2022-18호(2022.03.02) 승강기안전부품 안전기준 및 승강기 안전기준 [별표 12] 완충기 안전기준 (KC 1030-11 : 2022)
<제외항목>
5.1.1 비선형 특성을 갖는 완충기
5.1.2 선형 특성을 갖는 완충기
6.3 에너지 축적형 완충기 안전성시험		 속도: 5.0 m/s 이하
중량: (200 ~ 6 800) kg		 소재지-2
▶ 계측기기
한전일반구매규격 (GS-5963-0008:2017) 홀효과방식 전류센서 모듈
6.3.2 출력 오차 시험
6.3.3 절연 저항 시험		 AC 250 A 이하 소재지-2
IEC 62053-23 Ed.1.0:2003 Electricity metering equipment(a.c.)-Particular requirements - Part 23 : Static meters for reactive (classes 2 and 3)


5.2 Tests of mechanical requirements
8.3 Tests of the effect of the climatic environments
9.3 Tests for electromagnetic compatibility		 AC 380 V or less 소재지-2
KS C IEC 60044-1:2003 계기용변성기 - 제1부 : 변류기
11.4 계기용 변류기의 오차 계급 형식 시험		 AC 10 kA 이하 소재지-2
KS C 1707 계기용변성기(전력 수급용)
9.2 전류 특성
9.3 전압 특성		 AC 110 kV, AC 5 kA 이하 소재지-2
KS C IEC 60044-2:2003 계기용변성기 - 제2부 : 유도형 계기용 변압기
12.3 계기용 변압기의 오차 계급 형식 시험		 AC 110 kV 이하 소재지-2
IEC 62053-21 Ed.1.0:2003 Electricity metering equipment(a.c.)-Particular requirements - Part 21 : Static meters for active energy (classes 1 and 2)


5.2 Tests of mechanical requirements
8.3 Tests of the effect of the climatic environments
9.3 Tests for electromagnetic compatibility		 AC 380 V or less 소재지-2
IEC 62053-22:2003 Electricity metering equipment(a.c.) - Particular requirements - Part 22 : Static meters for active(classes 0.2 S and 0.5 S)


5.2 Tests of mechanical requirements
8.3 Tests of the effect of the climatic environments
9.3 Tests for electromagnetic compatibility		 AC 380 V or less 소재지-2
산업통상자원부 고시 제2024-115호(2024.07.17) 전기자동차 충전기 기술기준

<제외항목>
8.2.1 전자파적합성		 AC 600 V, DC 1 000 V 이하 소재지-2
산업통상자원부 고시 제2020-230호(2020.12.28.) 전력량계 기술기준

<제외항목>
5.2 기계적 강도 시험
8.3 기후 영향 시험
9.2 전자기적 적합성
12.5 열과 불의 내력
12.6 먼지, 물의 침투에 대한 보호성
13.1 습윤, 아황산가스의 영향
13.4 옥외 폭로의 영향		 AC 380 V, DC 1 500 V 이하 소재지-2
KS C 1208:2010 유도형 전력량계

<제외항목>
6.16 진동의 영향
6.17 충격의 영향		 AC 380 V 이하 소재지-2
KS C IEC 60145:2003 무효전력량계 AC 380 V 이하 소재지-2
KS C IEC 62052-11:2005 전기 계량장치(교류) - 시험과 시험 조건을 위한 일반 요구 조건 - 제 11부: 계량 장치

<제외항목>
5.2 기계적 특성 시험
5.8 열과 불에 대한 저항 시험
5.9 먼지나 물의 침투에 대한 보호 시험
6.3 내환경성 시험
7.5 전자기 적합성 시험		 AC 380 V 이하 소재지-2
KS C IEC 62053-11:2003 유도형 유효 전력량계 (0.5급 1급 및 2급) AC 380 V 이하 소재지-2
KS C IEC 62053-21:2003 전자식유효 전력량계 (1급 및 2급)

<제외항목>
5.2 기계적 요구 조건의 시험
5.3 기후 영향에 대한 시험
5.5 전자 적합성 시험		 AC 380 V 이하 소재지-2
KS C IEC 62053-22:2003 전자식유효 전력량계 (0.2급 및 0.5급)

<제외항목>
5.2 기계적 요구 조건의 시험
5.3 기후 영향에 대한 시험
5.5 전자 적합성 시험		 AC 380 V 이하 소재지-2
KS C IEC 62053-23:2005 전기 계량장치 - 특수 요구 사항
- 제 23부: 전자식 무효 전력량계(2급 및 3급)		 AC 380 V 이하 소재지-2
IEC 60145:1963 Var-hour(reactive energy) meters AC 380 V or less 소재지-2
IEC 61869-1:2007 Instrument transformers - Part 1: General requirements
7.2.6 Test for accuracy		 AC 110 kV, AC 10 kA or less 소재지-2
IEC 61869-2:2012 Instrument transformers - Part 2: Additional requirements for current transformers
7.2.6 Test for accuracy		 AC 10 kA or less 소재지-2
IEC 61869-3:2011 Instrument transformers - Part 3: Additional requirements for inductive voltage transformers
7.2.6 Test for accuracy		 AC 110 kV or less 소재지-2
IEC 61869-6:2016 Instrument transformers - Part 6: Additional general requirements for low-power instrument transformers
7.2.6 Test for accuracy		 AC 230 V, DC 220 V or less 소재지-2
IEC 62052-11:2003 Electricity metering equipment(AC)-General requirements tests and test conditions - Part 11 : Metering equipment


5.2 Tests of mechanical requirements
8.3 Tests of the effect of the climatic environments
9.3 Tests for electromagnetic compatibility		 AC 380 V or less 소재지-2
IEC 62053-11:2003 Electricity metering equipment(a.c.)-Particular requirements
- Part 11 : Electro mechanical meters for active energy (classes 0.5 1 and 2)		 AC 380 V or less 소재지-2
KS C 1214:2010 전자식유효/무효 전력량계
(유효 0.2급/0.5급 1.0급/ 2.0급 무효 2.0급/3.0급)

<제외항목>
7.17 전자기적 적합성
7.18 기후 영향
7.19 내진동성
7.20 내충격성
7.21 기계적 강도
7.22 먼지 물의 침투에 대한 보호성
7.23 열과 불의 내력		 AC 380 V 이하 소재지-2
▶ 유/무선 통신기기
3GPP TS 34.229-1 Technical Specification Group Radio Access Network; Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); User Equipment (UE) conformance specification ; Part 1: Protocol conformance specification 9 kHz ~ 12.75 GHz 소재지-2
ETSI EN 301 908-1:2023 IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements Release 15 30 MHz ~ 26 GHz 소재지-2
3GPP TS 34.122 Universal Mobile Telecommunications System (UMTS); Terminal conformance specification; Radio transmission and reception (TDD) 9 kHz ~ 12.75 GHz 소재지-2
3GPP TS 36.508 Technical Specification Group Radion Access Network; Evolved Universal Terrestrial Radio Access(E-UTRA) and Evolved Packet Core(EPC); Common test environments for User Equipment(UE) conformance testing 9 kHz ~ 12.75 GHz 소재지-2
3GPP TS 36.521-1 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification Radio transmission and reception Part 1: Conformance Testing 9 kHz ~ 12.75 GHz 소재지-2
3GPP TS 36.521-3 Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 3: Radio Resource Management (RRM) conformance testing (600 ~ 3 800) MHz 소재지-2
3GPP TS 36.523-1 Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC);User Equipment (UE) conformance specification; Part 1: Protocol conformance specification (600 ~ 3 800) MHz 소재지-2
3GPP TS 38.508-1 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; 5GS; User Equipment (UE) conformance specification; Part 1: Common test environment FR1: (410 ~ 7 125) MHz,
FR2: (24 250 ~ 43 500) MHz		 소재지-2
3GPP TS 38.521-1 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Range 1 Standalone; FR1: (410 ~ 7 125) MHz 소재지-2
3GPP TS 38.521-2 3rd  Generation Partnership Project; Technical Specification Group Radio Access Network; NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 2: Range 2 Standalone FR2: (24 250 ~ 43 500) MHz 소재지-2
3GPP TS 38.521-3 3rd  Generation Partnership Project; Technical Specification Group Radio Access Network; NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 3: Range 1 and Range 2 Interworking operation with other radios FR1: (410 ~ 7 125) MHz,
FR2: (24 250 ~ 43 500) MHz		 소재지-2
3GPP TS 38.521-4 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NR; User Equipment (UE) conformance specification; Radio transmission and reception; Part 4: Performance requirements FR1: (410 ~ 7 125) MHz,
FR2: (24 250 ~ 43 500) MHz		 소재지-2
3GPP TS 38.523-1 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; 5GS; User Equipment (UE) conformance specification; Part 1: Protocol FR1: (410 ~ 7 125) MHz,
FR2: (24 250 ~ 43 500) MHz		 소재지-2
3GPP TS 38.533 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NR; User Equipment (UE) conformance specification; Radio Resource  Management (RRM) FR1: (410 ~ 7 125) MHz,
FR2: (24 250 ~ 43 500) MHz		 소재지-2
3GPP TR 37.901 Technical Specification Group Radio Access Network; User Equipment(UE) application layer data throughput performance (600 ~ 3 800) MHz 소재지-2
3GPP TS 51.010-1 Digital cellular telecommunications system (Phase 2+); Mobile Station(MS) conformance specification; Part 1: Conformance specification 9 kHz ~ 12.75 GHz 소재지-2
3GPP TS 51.010-4 Core Network and Terminals; Mobile Station(MS) conformance specification; Part 4:Subscriber Identity Module(SIM) application toolkit Conformance test Specification (800 ~ 2 200) MHz 소재지-2
3GPP TS 34.123-1 User Equipment (UE) conformance specification; Part 1: Protocol conformance specification (600 ~ 3 800) MHz 소재지-2
3GPP TS 38.124 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NR;
ElectroMagnetic Compatibility (EMC) requirements for mobile terminals and ancillary equipment		 9 kHz ~ 26 GHz 소재지-2
EN 301 908-2:2020 IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)		 9 kHz ~ 18 GHz 소재지-2
3GPP TS 34.108 Technical Specification Group Radio Access Network; Common test environments for User Equipment(UE); Conformance testing 9 kHz ~ 12.75 GHz 소재지-2
3GPP TS 34.121-1 UMTS; User Equipment (UE) conformance specification; Radio transmission and reception (FDD); Part 1: Conformance Specification 9 kHz ~ 12.75 GHz 소재지-2
OMA-ETS-MMS_INT:2010 Enabler Test Specification (Interoperability) for MMS (600 ~ 3 800) MHz 소재지-2
CTIA Battery Life Test Plan:2025 CTIA Battery Life Test Plan 전압 : 1 µV  ~  5 V
전류 : 1 µA  ~  20 A		 소재지-2
ETSI TS 102 230-1:2016 Smart Cards; UICC-Terminal interface; Physical, electrical and logical test specification; Part 1: Terminal features (700 ~ 2 600) MHz 소재지-2
3GPP TS 31.124 Technical Specification Group Core Network and Terminals; Mobile Equipment (ME)conformance test specification; Universal Subscriber Identity Module Application Toolkit (USAT) conformance test specification (600 ~ 3 800) MHz 소재지-2
3GPP TS 31.121 UICC-terminal interface; Universal Subscriber Identity Module(USIM) application tests pecification (600 ~ 3 800) MHz 소재지-2
EN 301 511:2017 Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU 9 kHz ~ 18 GHz 소재지-2
3GPP TS 36.124 Evoloved Universal Terrestrial Radio Access (E-UTRA); Electromagnetic compatibility(EMC) requirements for mobile terminals and ancillary equipment 30 MHz ~ 18 GHz 소재지-2
EN 301 908-13:2022 IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)

LTE Category : NB1, M1		 9 kHz ~ 18 GHz 소재지-2
OMA-ETS-MMS:2015 Enabler Test Specification for (Conformance) for MMS (600 ~ 3 800) MHz 소재지-2
▶ 전자기적합성
IEC 61000-4-28:1999+AMD1:2001+AMD2:2009 Electromagnetic compatibility (EMC)
- Part 4-28 : Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase		 AC input current : Max. 16 A (per phase) 소재지-2
IEC 61000-4-3:2020 Electromagnetic compatibility (EMC)
- Part 4-3 : Testing and measurement techniques -Radiated radio-frequency, electromagnetic field immunity test		 Freq. : 80 MHz ~ 18 GHz
E/F : 30 V/m
현장시험 : Field Uniformity		 소재지-2
IEC 61000-4-16:2015 Electromagnetic compatibility (EMC)
- Part 4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz		 최대전압 :
(연속인가) 30 Vrms
(짧은지속) 300 Vrms		 소재지-2
IEC 61000-4-18:2019 Electromagnetic compatibility (EMC)
- Part 4-18 : Testing and measurement techniques -Damped oscillatory wave immunity test		 전압(저속) : ±2.5 kV
전압(고속) : ±4 kV		 소재지-2
CISPR 11:2015+AMD1:2016+AMD2:2019 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz		 소재지-2
CISPR 32:2015+AMD1:2019 Electromagnetic compatibility of multimedia equipment - Emission requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-2
CISPR 25:2016 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limit and methods of measurement for the protection of on-board receivers

 5 Measurement of emissions received by an antenna on the same vehicle
 6.6 Radiated emissions from components/modules - TEM cell method
 6.7 Radiated emissions from components/modules - Strip line method		 CE-V : 150 kHz ~ 108 MHz
CE-S : 150 kHz ~ 245 MHz
RE : 150 kHz ~ 2.5 GHz		 소재지-2
CISPR 35:2016 Electromagnetic compatibility of multimedia equipment - Immunity requirements ESD : ±8 kV
RS: 80 MHz ~ 5 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 1 A/m
V-DIP : ≤ 75 A
SPL : 0.15 MHz ~ 1 GHz		 소재지-2
ISO 10605:2023 Road vehicles - Test methods for electrical disturbances from electrostatic discharge Voltage : ±25 kV 소재지-2
ISO 11452-1:2025 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1 : General principles and terminology - 소재지-2
ISO 11452-2:2019 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2 : Absorber-lined shielded enclosure Freq. : 80 MHz ~ 18 GHz
E/F : 200 V/m		 소재지-2
ISO 11452-4:2020 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4 : Harness excitation methods BCI : 100 kHz ~ 400 MHz, 200 mA
TWC : 400 MHz ~ 3 GHz, 33 dBm		 소재지-2
ISO 11452-7:2003+A1:2013 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7 : Direct radio frequency (RF) power injection Freq. : 1 MHz ~ 400 MHz
Power : 0.5 W		 소재지-2
ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8 : Immunity to magnetic fields Freq. : DC, 15 Hz ~ 150 kHz
MFS : DC 25 mT, AC 3 000 A/m		 소재지-2
ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9 : Portable transmitters Freq. : 26 MHz ~ 5.85 GHz 소재지-2
IEC 61000-4-27:2000+AMD1:2009+AMD2:2025 Electromagnetic compatibility (EMC)
- Part 4-27 : Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase		 AC input current : Max. 16 A (per phase) 소재지-2
IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 Electromagnetic compatibility (EMC)
- Part 4-17 : Testing and measurement techniques - Ripple on d.c. input power port immunity test		 직류입력전압 : Max. 600 V 소재지-2
IEC 61000-4-14:1999+AMD1:2001+AMD2:2009 Electromagnetic compatibility (EMC)
- Part 4-14 : Testing and measurement techniques - Voltage fluctuations immunity test for equipment with input current not exceeding 16 A per phase		 Voltage : ±12 % Un 소재지-2
IEC 62236-3-1:2018 Railway applications - Electromagnetic compatibility
- Part 3-1: Rolling stock -Train and complete vehicle		 RE : 9 kHz ~ 1 GHz 소재지-2
IEC 62236-3-2:2018 Railway applications - Electromagnetic compatibility
- Part 3-2: Rolling stock - Apparatus		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±2 kV
SURGE : ±2 kV		 소재지-2
IEC 62236-4:2018 Railway applications - Electromagnetic compatibility
- Part 4: Emission and immunity of the signalling and telecommunications apparatus		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±2 kV
SURGE : ±2 kV
MFS : 300 A/m		 소재지-2
IEC 62236-5:2018 Railway applications - Electromagnetic compatibility
- Part 5: Emission and immunity of the fixed power supply installations and apparatus		 CE : 150 kHz ~ 30 MHz
RE : 150 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
CS : 150 kHz ~ 80 MHz
Oscillatory waves : 2.5 kV
EFT : ±4 kV
SURGE : ±4 kV
MFS : 300 A/m		 소재지-2
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-2
IEC 61000-4-6:2013 Electromagnetic compatibility (EMC)
- Part 4-6 : Testing and measurement techniques - Immunity to Conducted Disturbances, Induced by radio-frequency Fields		 Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-2
IEC 61000-4-4:2012 Electromagnetic compatibility (EMC)
- Part 4-4 : Testing and measurement techniques - Electrical fast transient/burst immunity test		 Voltage : ±5.5 kV 소재지-2
IEC 61000-3-3:2013+A1:2017+A2:2021 Electromagnetic compatibility (EMC)
- Part 3-3 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤16 A per phase and not subject to conditional connection		 AC input current : Max. 16 A (per phase) 소재지-2
IEC 61000-4-29:2000 Electromagnetic compatibility (EMC)
- Part 4-29 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests		 DC input Voltage : 600 V 소재지-2
IEC 61000-4-9:2016 Electromagnetic compatibility (EMC)
- Part 4-9 : Testing and measurement techniques - Pulse magnetic field immunity test		 Pulse MFS : 1 000 A/m 소재지-2
IEC 61000-4-11:2020 Electromagnetic compatibility (EMC)
- Part 4-11 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests		 AC input current : Max. 16 A (per phase) 소재지-2
IEC 61000-4-5:2014+AMD1:2017 Electromagnetic compatibility (EMC)
- Part 4-5 : Testing and measurement techniques - Surge Immunity test		 Voltage : ±7 kV 소재지-2
IEC 61000-4-12:2017 Electromagnetic compatibility (EMC)
- Part 4-12 : Testing and measurement techniques - Ring wave immunity test		 Voltage : ±4 kV 소재지-2
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC)
- Part 4-2 : Testing and measurement techniques - Electrostatic discharge immunity test		 Voltage : ±30 kV 소재지-2
IEC 61000-4-8:2009 Electromagnetic compatibility (EMC)
- Part 4-8 : Testing and measurement techniques - Power frequency magnetic field immunity test		 Maximum magnetic field :
(Continuous field) 100 A/m
(Short persistence) 1 000 A/m		 소재지-2
IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 Electromagnetic compatibility (EMC)
- Part 4-13 : Testing and measurement techniques - Harmonics and inter-harmonics including mains signalling at a.c. power port, low frequency immunity tests		 Freq. : 16 Hz ~ 2.4 kHz
Voltage : U1 × 12 %		 소재지-2
ISO 16750-2:2023 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2 : Electrical loads Freq. : 50 Hz ~ 25 kHz
Voltage : -28 V ~ 202 V		 소재지-2
ISO 7637-1:2023 Road vehicles - Electrical disturbances from conduction and coupling - Part 1 : Vocabulary and general considerations - 소재지-2
ISO 7637-2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2 : Electrical transient conduction along supply lines only TI : -600 V ~ 300 V
TE : 1 000 ns ~ 1 000 ms		 소재지-2
CISPR TR 16-3:2015 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 3 : CISPR technical reports		 - 소재지-2
IEC CISPR 16-4-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 4-1 : Uncertainty, statistics and limit modeling - Uncertainties in standardized EMC tests		 - 소재지-2
CISPR 16-4-2:2011+AMD1:2014+AMD2:2018 CSV Specification for radio disturbance and immunity measuring apparatus and methods
- Part 4-2 : Uncertainty, statistics and limit modeling -Measurement instrumentation uncertainty		 - 소재지-2
CISPR TR 16-4-3:2004+AMD1:2006 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 4-3 : Uncertainty, statistics and limit modeling - Statistical considerations in the determination of EMC compliance of mass-produced products		 - 소재지-2
IEC 61000-3-2:2018+AMD1:2020+AMD2:2024 Electromagnetic compatibility (EMC)
- Part 3-2 : Limits - Limits for harmonic current emissions (equipment input current ≤16 A per Phase)		 AC input current : Max. 16 A (per phase) 소재지-2
IEC CISPR 16-2-4:2003 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 2-4 : Methods of measurement of disturbances and immunity - Immunity measurements		 Freq. : 9 kHz ~ 18 GHz 소재지-2
CISPR 16-2-3:2016+AMD1:2019+AMD2:2023 CSV Specification for radio disturbance and immunity measuring apparatus and methods
- Part 2-3 : Methods of measurement of disturbances and immunity - Radiated disturbance measurements		 Freq. : 9 kHz ~ 18 GHz 소재지-2
IEC CISPR 16-2-2:2010 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 2-2 : Methods of measurement of disturbances and immunity - Measurement of disturbance power		 Freq. : 30 MHz ~ 1 GHz 소재지-2
ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3 : Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines TI : -150 V ~ 150 V 소재지-2
AS/NZS CISPR 11:2024 Industrial, scientific and medical equipment -Radio-frequency disturbance characteristics -Limits and methods of measurement CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz		 소재지-2
AS/NZS CISPR 14-1:2021 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission CE : 148.5 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 30 MHz ~ 1 GHz		 소재지-2
CISPR TR 16-4-4:2025 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 4-4 : Uncertainty, statistics and limit modeling - Statistics of complaints and a model for the calculation of limits for the protection of radio services		 - 소재지-2
CISPR 14-1:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz		 소재지-2
CISPR 14-2:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : Immunity - Product family standard ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
V-DIP : ≤75 A		 소재지-2
CISPR 15:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
CISPR 16-1-1:2019 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 1-1 : Radio disturbance and immunity measuring apparatus - Measuring apparatus		 Freq. : 9 kHz ~ 18 GHz 소재지-2
CISPR 16-1-2:2014+AMD1:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods
- Part 1-2 : Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements		 Freq. : 9 kHz ~ 1 GHz 소재지-2
CISPR 16-1-3:2014+AMD1:2016+AMD2:2020 CSV Specification for radio disturbance and immunity measuring apparatus and methods
- Part 1-3 : Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power		 Freq. : 30 MHz ~ 1 GHz 소재지-2
CISPR 16-1-4:2025 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 1-4 : Radio disturbance and immunity measuring apparatus - Ancillary equipment - Antennas and test sites for radiated disturbance measurements		 Freq. : 9 kHz ~ 18 GHz 소재지-2
IEC CISPR 16-1-5:2016 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 1-5 : Radio disturbance and immunity measuring apparatus - Specifications and validation procedures for CALTS and REFTS from 30 MHz to 1 000 MHz		 Freq. : 30 MHz ~ 1 GHz 소재지-2
IEC CISPR 16-2-1:2017 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 2-1 : Methods of measurement of disturbances and immunity - Conducted disturbance measurements		 Freq. : 9 kHz ~ 1 GHz 소재지-2
IEC 62236-2:2018 Railway applications - Electromagnetic compatibility
- Part 2: Emission of whole railway system to the outside world		 RE : 9 kHz ~ 1 GHz 소재지-2
국가기술표준원 고시 제2009-746호(2009.12.01) 가정용 청소로봇 품질인증 기준  QCR-1A001
6.5 전자기 적합성 (EMC)		 RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m		 소재지-2
산업통상자원부 고시 제2024-115호(2024.07.17) 전기자동차 충전기 기술기준
8.2.1 전자파 적합성		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
산업통상자원부 고시 제2025-149호(2025.8.29) 전력량계 기술기준
제1-1절 전력량계 일반 요구사항  
 9.2 전자기적 적합성
제1-2절 교류 유도형 전력량계 형식승인 기준
 9.2 전자기적 적합성
제1-3절 교류 전자식 전력량계 형식승인 기준
 9.2 전자기적 적합성
제1-4절 직류 전자식 전력량계 형식승인 기준
 9.2 전자기적 적합성		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±15 kV
RS : 80 MHz ~ 2 GHz, 30 V/m
EFT : ±4 kV
Surge : ±4 kV
Ring wave : ±2.5 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 0.5 mT
V-DIP : ≤75 A		 소재지-2
95/56/EC:1995 Adapting to technical progress Council Directive 74/61/EEC relating to devices to prevent the unauthorized use of motor vehicles RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V		 소재지-2
95/54/EC:1995 Adapting to technical progress Council Directive 72/245/EEC on the approximation of the laws of the Member States relating to the suppression of radio interference produced by spark-ignition engines fitted to motor vehicles and amending Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers.

ANNEX IV Method of measurement of radiated broadband electromagnetic emissions from vehicles.
ANNEX V Method of measurement of radiated narrowband electromagnetic emissions from vehicles.
ANNEX VI Method of testing for immunity of vehicles to electromagnetic radiation.		 RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V		 소재지-2
3GPP 34.124:2018 3rd Generation Partnership Project; Technical Specification Group Radio Access Network; Electro Magnetic Compatibility(EMC) requirements for mobile terminals and ancillary equipment CE : 150 kHz ~ 30 MHz
RE : Max. 18 GHz		 소재지-2
2006/28/EC:2006 Adapting to technical progress Council Directive 72/245/EEC relating to the radio interference (electromagnetic compatibility) of vehicles and amending Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers.

ANNEX IV Method of measurement of radiated broadband electromagnetic emissions from vehicles
ANNEX V Method of measurement of radiated narrowband electromagnetic emissions from vehicles.
ANNEX VI Method of testing for immunity of vehicles to electromagnetic radiation		 RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V		 소재지-2
RS-KTL-2012-0018:2012 HEMP 방호용 필터
5.3.1 성능시험
6.2.4 과부하시험
6.3.2 PCI 수명시험		 PCI : 5 000 A 이하
전원용량 : 200 A 이하		 소재지-2
NRC Reg. Guide 1.180:2003 Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems :
3.1 CE101-Conducted emissions, Low Frequency
3.2 CE102-Conducted emissions, High Frequency
3.3 RE101-Radiated emissions, Magnetic field
3.4 RE102-Radiated emissions, Electric field
3.5 IEC Emissions Tests
4.1.1 CS101-Conducted susceptibility, LF
4.1.2 CS114-Conducted susceptibility, HF
4.1.3 IEC Conducted Susceptibility - Power
4.2 EMI/RFI Conducted Susceptibility - Signal
4.3.1 RS101-Radiated susceptibility, MF
4.3.2 RS103-Radiated susceptibility, EF
4.3.3 IEC Radiated Susceptibility Tests
5.1 IEEE C62.41 Ring wave and IEC 61000-4-12
5.2 IEEE C62.41 Combination wave and IEC 61000-4-5
5.3 IEEE C62.41 Electrically Fast Transients and IEC 61000-4-4		 CE, CS : Max. 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 180 dBpT		 소재지-2
NRC Reg. Guide 1.180:2000 Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems :
4.1 CE101-Conducted emissions, Low Frequency
4.2 CE102-Conducted emissions, High Frequency
4.3 CS101-Conducted susceptibility, Low Frequency
4.4 CS114-Conducted susceptibility, High Frequency
4.5 RE101-Radiated emissions, Magnetic field
4.6 RE102-Radiated emissions, Electric field
4.7 RS101-Radiated susceptibility, MF
4.8 RS103-Radiated susceptibility, EF
6.1 Ring wave
6.2 Combination wave
6.3 Electrically Fast Transients		 CE, CS : Max. 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 180 dBpT		 소재지-2
GMW3172:2023 General Specification for Electrical/Electronic Component - Environmental/Durability Freq. : 1 Hz ~ 4 kHz
Voltage : -13.5 V ~ 26 V		 소재지-2
GMW3100:2003 General Specification for Electrical/ Electronic Components and Subsystems, Electromagnetic Compatibility - Verification - 소재지-2
GMW3097:2025 General Specification for Electrical/ Electronic Components and Subsystems, Electromagnetic Compatibility

3.4.3 Immunity, Reverberation, Mode Tuning		 BCI : 1 MHz ~ 400 MHz, 106 mA
RI : 80 MHz ~ 2 GHz, 300 V/m
MI : DC ~ 1 MHz, 1 275 μT
CE : 530 kHz ~ 1.71 MHz
RE : 530 KHz ~ 1.606 GHz
ME : 100 KHz ~ 150 kHz
TI : -200 V ~ 100 V
TE : 1 000 ns ~ 1 000 ms
ESD : ±25 kV		 소재지-2
ETSI EN 300 386:2025 Telecommunication network equipment; Electromagnetic Compatibility (EMC) requirements; Harmonised Standard covering the essential requirements of the Directive 2014/30/EU CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤16 A		 소재지-2
EPRI Rev.3:2004 Guidelines for Electromagnetic Interference Testing of Power Plant Equipment :
5-6 Low-frequency conducted susceptibility
5-8 High-frequency conducted susceptibility
5-10 Low-frequency radiated magnetic field susceptibility
5-12 High-frequency radiated electric field susceptibility
5-13 Surge
5-15 Electrically-Fast Transient/Burst
5-17 Electrostatic Discharge
5-19 Low-frequency conducted emissions
5-21 High-frequency conducted emissions
5-23 Low-frequency radiated magnetic field emissions
5-24 High-frequency radiated electric field emissions		 CE, CS : Max. 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 180 dBpT
정전기전압 : Max. 30 kV
EFT전압 : Max. 5.5 kV
서지전압 : Max. 6.6 kV		 소재지-2
ECE R-10.05:2014 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

Annex 4 : Method of measuring broadband electromagnetic disturbances generated by vehicles
Annex 5 : Method of measuring narrowband electromagnetic disturbances generated by vehicles
Annex 6 : Method of testing vehicle immunity to electromagnetic radiation		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms
EFT : ±2 KV
Surge : ±2 KV
H/F : ≤64 A		 소재지-2
ECE R-10.04:2012+A2:2013 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

Annex 4 : Method of Measurement of Radiated Broadband Electromagnetic Emissions from Vehicles
Annex 5 : Method of Measurement of Radiated Narrowband Electromagnetic Emissions from Vehicles
Annex 6 : Method of Testing for Immunity of Vehicles to Electromagnetic Radiation		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms
EFT : ±2 KV
Surge : ±2 KV
H/F : ≤64 A		 소재지-2
ECE R-116:2006+A4:2013 Uniform provisions concerning the protection of motor vehicles against unauthorized use RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
ESD : ±15 kV		 소재지-2
ECE R-97.01:2007+A3:2013 Uniform provisions concerning the approval for vehicle alarm systems (VAS) and of motor vehicles with regard to their alarm systems (AS) RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
ESD : ±15 kV		 소재지-2
EPRI Rev.1:1997 Guidelines for electromagnetic interference testing in power plants :
7-2 Equipment conducted emissions, 30 Hz to 50 kHz
7-3 Equipment conducted emissions, 50 kHz to 400 MHz
7-4 Equipment radiated magnetic field emissions, 30 Hz to 100 kHz
7-5 Equipment radiated electric field emissions, 10 kHz to 1 GHz
B-10 Continuous wave, Radiated
B-11 Continuous wave, conducted
B-12 Surge tests
B-14 Fast transient and impulse tests
B-14 Electrostatic Discharge		 CE, CS : Max. 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 180 dBpT
정전기전압 : Max. 30 kV
EFT전압 : Max. 5.5 kV
서지전압 : Max. 6.6 kV		 소재지-2
EPRI Rev.2:2000 Guidelines for electromagnetic interference testing in power plants :
5-8 Low-frequency conducted susceptibility
5-10 High-frequency conducted susceptibility
5-12 Low-frequency radiated susceptibility
5-14 High-frequency radiated susceptibility
5-15 Surge
5-16 Electrically-Fast Transient/Burst
5-17 Electrostatic Discharge
5-18 Low-frequency conducted emissions
5-20 High-frequency conducted emissions
5-22 Low-frequency radiated emissions
5-24 High-frequency radiated emissions		 CE, CS : Max. 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 180 dBpT
정전기전압 : Max. 30 kV
EFT전압 : Max. 5.5 kV
서지전압 : Max. 6.6 kV		 소재지-2
SANS 61000-4-12:2007 Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques - Ring wave immunity test Voltage oscillation frequency : 100 kHz ± 10 %
Open-circuit voltage : 250 to 4 kV
Short-circuit Current : 333 A ± 10 % 12 Ω		 소재지-2
MIL-STD-461F:2007 Department of Defense Test Method Standard Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment
  5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz
  5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz
  5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz
  5.11 CS106, conducted susceptibility, transients, power leads
  5.13 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
  5.14 CS115, conducted susceptibility, bulk cable injection, impulse excitation
  5.15 CS116, conducted susceptibility, damped sinusoidal transients, cable and power leads, 10 kHz to 100 MHz
  5.16 RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz
  5.17 RE102, radiated emissions, electric field, 10 kHz 18 GHz
  5.19 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
  5.20 RS103, radiated susceptibility, electric field, 2 MHz to 18 GHz		 CE : 30 Hz ~ 10 MHz
CS : 30 Hz ~ 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 183 dBpT		 소재지-2
EN 61547:2009 Equipment for general lighting purposes EMC immunity requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 3 A/m
V-DIP : ≤16 A		 소재지-2
EN 62040-2:2018 Uninterruptible power systems(UPS) - Part 2 : Electromagnetic compatibility(EMC) requirements CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Freq. : 1 Hz ~ 10 GHz 소재지-2
ANSI C 63.4a:2017 American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 18 GHz		 소재지-2
ASTM D4935-18 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials Frequency : Max. 1.5 GHz 소재지-2
FCC part 15:2024 Radio Frequency Device Subpart B - Unintentional Radiators CE : 150 kHz ~ 30 MHz
RE : Max. 18 GHz		 소재지-2
FCC part 18:2018 Industrial, scientific and medical device CE : 150 kHz ~ 30 MHz
RE : Max. 18 GHz		 소재지-2
IEEE 299:2006 Standard Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures 주파수 : Max. 40 GHz 소재지-2
JASO D 001:1994 General rules of environmental testing methods for automotive electronic equipment CE, BCI : Max. 1 GHz
RE, RS : Max. 18 GHz		 소재지-2
MIL-PRF-15733 (2007; Rev H) Filters and Capacitors, Radio Frequency Interference, General Specification for
4.6.8 Voltage Drop
4.6.9 Insertion Loss
4.6.10 Overload		 PCI : 5 000 A 이하
전원용량 : 200 A 이하		 소재지-2
MIL-STD-188-125-1:2005 High-altitude electromagnetic pulse(HEMP) protection for ground-based C4I facilities performing critical, time-urgent missions Part 1 Fixed facilities

Long pulse of Appendix B, Surface current density and Surface charge density of Appendix C in the frequency range <5 MHz		 주파수범위 : 10 kHz ~ 1 GHz(SE), 100 kHz ~ 1 GHz(CWI)
최대 인가전류(PCI) : Max. 5 000 A, ≤ 20 ns, 500 ~ 550 ns		 소재지-2
MIL-STD-188-125-2:2005 High-altitude electromagnetic pulse(HEMP) protection for ground-based C4I facilities performing critical, time-urgent missions Part 1 Transportable Systems

Long pulse of Appendix B, AppendixD (THREAT-LEVEL ILLUMINATION TEST PROCEDURES FOR TRANSPORTABLE GROUND-BASED SYSTEMS) Surface current density and Surface charge density of Appendix C in the frequency range <5 MHz		 주파수범위 : 10 kHz ~ 1 GHz(SE), 100 kHz ~ 1 GHz(CWI)
최대 인가전류(PCI) : Max. 5 000 A, ≤ 20 ns, 500 ~ 550 ns		 소재지-2
MIL-STD-220C:2009 Test Method Standard - Method of insertion Loss Measurement 주파수 : Max. 10GHz 소재지-2
MIL-STD-285:1956 Attenuation Measurements for Enclosures, Electromagnetic Shielding, for Electronic Test Purposes, Method of 주파수 : Max. 10GHz 소재지-2
MIL-STD-461D:1993 Department of Defense Test Method Standard for Measurement
  5.3.1 CE101, conducted emissions, power leads, 30 Hz to 10 kHz
  5.3.2 CE102, conducted emissions, power leads, 10 kHz to 10 MHz
  5.3.4 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz
  5.3.9 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
  5.3.10 CS115, conducted susceptibility, bulk cable injection, impulse excitation
  5.3.11 CS116, conducted susceptibility, damped sinusoidal transients, 10 kHz to 100 MHz
  5.3.12 RE101, radiated emissions, magnetic field, 30 ㎐ to 100 kHz
  5.3.13 RE102, radiated emissions, electric field, 10 kHz to 18 GHz
  5.3.15 RS101, radiated susceptibility, magnetic field, 30 ㎐ to 100 kHz
  5.3.16 RS103, radiated susceptibility, electric field, 2 MHz to 18 GHz		 CE : 30 Hz ~ 10 MHz
CS : 30 Hz ~ 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 183 dBpT		 소재지-2
MIL-STD-462D:1993 Department of Defense Test Method Standard
5. CE101, conducted emissions, power leads, 30 Hz to 10 kHz
5. CE102, conducted emissions, power leads, 10 kHz to 10 MHz
5. RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz
5. RE102, radiated emissions, electric field, 10 kHz to 18 GHz
5. CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz
5. CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
5. CS115, conducted susceptibility, bulk cable injection, impulse excitation
5. CS116, conducted susceptibility, damped sinusoidal transients, cable and power leads, 10 kHz to 100 MHz
5. RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
5. RS103, radiated susceptibility, electric field, 2 MHz to 18 GHz		 CE : 30 Hz ~ 10 MHz
CS : 30 Hz ~ 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 183 dBpT		 소재지-2
RTQ 427:2014 Technical Regulation for Quality CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-2
SANS 214-2:2009 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 2: Immunity - Product family standard ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz
V-DIP : 상당 16 A 이하기기		 소재지-2
TCVN 7492-1:2018 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission RE : 30 MHz ~ 1 GHz
CE : 148.5 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz		 소재지-2
SAE J 1113/12_202209 Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines other than Supply Lines TI : -80 V ~ 80 V 소재지-2
SAE J 1113/13_201502 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13 : Immunity to Electrostatic Discharge ESD : ±25 kV 소재지-2
SAE J 1113/2_201008 Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft) Conducted Immunity, 15 Hz to 250 kHz All Leads Freq. : 15 Hz ~ 250 kHz
Voltage : 3 Vpp		 소재지-2
SAE J 1113/21_201305 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21 : Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber Freq. : 30 MHz ~ 18 GHz
E/F : 200 V/m		 소재지-2
SAE J 1113/22_201008 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 22 : Immunity to Radiated Magnetic Fields Freq. : 15 Hz ~ 30 kHz
MFS : 80 µ		 소재지-2
SAE J 1113/3_201008 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power Freq. : 250 kHz ~ 400 MHz
Power : 0.5 W		 소재지-2
SAE J 1113/41_200609 Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers used on Board Vehicles CE : 150 kHz ~ 108 MHz
RE : 150 kHz ~ 1 GHz		 소재지-2
SAE J 1113/42_201012 Electromagnetic Compatibility - Component Test Procedure - Part 42 : Conducted Transient Emissions TE : 1 000 ns ~ 1 000 ms 소재지-2
SAE J 1113/11_202303 Immunity to Conducted Transients on Power Leads TI : -600 V ~ 200 V 소재지-2
SAE J 1113/26_202112 Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields E/F : 15 kV/m 소재지-2
SAE J 1113/27_202303 Electromagnetic Compatibility Measurements Procedure for vehicle Components -　Part 27 : Immunity to Radiated Electromagnetic fields - Mode Stir Reverberation Method Freq. : 500 MHz ~ 2 GHz
E/F : 150 V/m		 소재지-2
SAE J 1113/4_202002 Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method Freq. : 1 MHz ~ 400 MHz
Current : 200 mA		 소재지-2
SANS 211:2010 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz		 소재지-2
SANS 213:2011 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement CE(mains) : 150 kHz ~ 30 MHz
CE(antenna port) : 30 MHz ~ 2.15 GHz
CE(RF output port) : 30 MHz ~ 2.15 GHz
DP : 30 MHz ~ 300 MHz
RE : 30 MHz ~ 1 GHz
RP : 0.9 GHz ~ 18 GHz		 소재지-2
SANS 214-1:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus Part 1: Emission RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz
DCE: 150 kHz ~ 30 MHz
MFE: 9 kHz ~ 30 MHz
DP: 30 MHz ~ 300 MHz		 소재지-2
MIL-STD-461E:1999 Department of Defense Interface Standard
  5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz
  5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz
  5.7 CS101, conducted susceptibility, power leads, 30 Hz to 50 kHz
  5.12 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
  5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation
  5.14 CS116, conducted susceptibility, damped sinusoidal transients, cable and power leads, 10 kHz to 100 MHz
  5.15 RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz
  5.16 RE102, radiated emissions, electric field, 10 kHz 18 GHz
  5.18 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
  5.19 RS103, radiated susceptibility, electric field, 2 MHz to 18 GHz		 CE : 30 Hz ~ 10 MHz
CS : 30 Hz ~ 1 GHz
RE, RS : Max. 18 GHz
전기장 : Max. 50 V/m
자기장 : Max. 183 dBpT		 소재지-2
SANS 215:2019 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
SANS 61000-4-13:2009 Electromagnetic compatibility (EMC) Part 4-13: Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests 9차 고조파
Frequency range: 2 kHz / 50 Hz, 2.4 kHz / 60 Hz		 소재지-2
SANS 224:2010 Information technology equipment - Immunity characteristics - Limits and methods of measurement ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 1 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
SANS 225:2019 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers CE : 150 kHz ~ 108 MHz
RE : 150 kHz ~ 2.5 GHz		 소재지-2
SANS 60601-1-2:2022 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
SANS 61000-3-2:2009 Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) 16 A 이하 소재지-2
SANS 61000-3-3:2009 Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low- voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection 16A 이하
Pst < 1.0
Plt < 0.65
d(t) < 3.3 %
dc < 3.3 %
dmax : a) < 4 %, b) < 6 %, c) < 7 %		 소재지-2
SANS 61000-3-11:2003 Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection 75 A 이하
Pst < 1.0
Plt < 0.65
d(t) < 3.3 %
dc < 3.3 %
dmax : a) < 4 %, b) < 6 %, c) < 7 %		 소재지-2
SANS 61000-3-12:2012 Electromagnetic compatibility (EMC) Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase 교류입력전류 : Max. 75 A (각 상당) 소재지-2
SANS 61000-4-2:2009 Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Max. ±30 kV, 150 ㎊/330 Ω 소재지-2
SANS 61000-4-3:2008 Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test RS : 80 MHz ~ 6 GHz 소재지-2
SANS 61000-4-4:2011 Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EFT : ±4 kV 소재지-2
SANS 61000-4-5:2006 Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test SURGE : ±6 kV 소재지-2
SANS 61000-4-6:2017 Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Frequency range : 150 kHz ~ 80 MHz
Voltage : 10 Vrms		 소재지-2
SANS 61000-4-8:2009 Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test M/F : 100 A/m 소재지-2
SANS 61000-4-9:2003 Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test Output current range : 100 A/m ~ 1 000 A/m 소재지-2
SANS 61000-4-11:2005 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests 상당 16 A 이하
0 % during 1/2 cycle
0 % during 1 cycle
40 % during 10/12 cycle
70 % during 25/30 cycle
80 % during 250/300 cycle
0 % during 250/300 cycle		 소재지-2
SANS 61000-4-14:2009 Electromagnetic compatibility (EMC) Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase Test level: U(nom) U(nom)-10 % U(nom) U(nom)+10 %U(nom) 소재지-2
SANS 61000-4-16:2011 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz Frequency range : 0 Hz ~ 150 kHz 소재지-2
TCVN 7317:2003 Information technology equipment - Immunity characteristics - Limits and methods of measurement ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 1 A/m
V-DIP ≤16 A		 소재지-2
SANS 222:2009 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-2
SANS 61000-4-17:2009 Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test Output voltage range up to 360 V 소재지-2
SANS 61000-4-27:2009 Electromagnetic compatibility (EMC) Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase 교류입력전류 : Max. 16 A (각 상당) 소재지-2
SANS 61000-4-28:2009 Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase 교류입력전류 : Max. 16 A (각 상당) 소재지-2
SANS 61000-4-29:2005 Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests 직류입력전압 : 600 V 소재지-2
SANS 61000-6-1:2005 Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
SANS 61000-6-2:2005 Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
SANS 61000-6-3:2011 Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz		 소재지-2
SANS 61000-6-4:2011 Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz		 소재지-2
SANS 61326-1:2007 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MF : 30 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
SANS 61326-2-3:2009 Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning Use with: SANS 61326-1:2000 ESD : ±8 kV
RS : 80 MHz ~ 3 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
SANS 61547:2021 Equipment for general lighting purposes - EMC immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
SANS 62040-2:2007 Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 상당 16 A 이하기기		 소재지-2
SANS 62233:2006 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Frequency range : 1 Hz ~ 400 kHz 소재지-2
TCVN 7186:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment RE : 9 kHz ~ 300 MHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
IL : 150 kHz ~ 1 605 kHz		 소재지-2
TCVN 7189:2009 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-2
DMFC 2-20-30:2014 국방·군사시설기준 : 전자파 방호시설 설계기준
<제외항목>
장펄스(Long Pulse) PCI 시험		 주파수범위 : 10 kHz ~ 1 GHz(SE), 100 kHz ~ 1 GHz(CWI)
최대인가전류(PCI) : 단펄스 5 kA, 중펄스 250 A		 소재지-2
EN 61326-2-5:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces  according to IEC 61784-1		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 3 A/m
V-DIP : ≤16 A		 소재지-2
EN 61000-4-4:2012 Electromagnetic compatibility (EMC)
- Part 4-4 : Testing and measurement techniques - Electrical fast transient/burst immunity test		 Voltage : ±5.5 kV 소재지-2
KS C 9816-2-2:2020 (MOD CISPR 16-2-2:2010) 전자파 방해 및 내성 측정장비와 측정방법 - 제2-2부: 전자파 방해 및 내성 측정방법 - 방해전력 측정 주파수범위 : 30 MHz ~ 1.0 GHz 소재지-2
EN 61326-2-4:2013 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 3 A/m
V-DIP : ≤16 A		 소재지-2
EN 301 489-34:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 34: Specific conditions for External Power Supply (EPS) for mobile phones; Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-4:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 4: Specific conditions for fixed radio links and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-5:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-6:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-7:2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part7 : Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS)		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 2.7 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A		 소재지-2
KS C 9816-2-1:2023 전자파 방해 및 내성 측정장비와 측정방법 - 제2-1부: 전자파 방해 및 내성 측정방법 - 전도성 방해 측정 주파수범위 : 9 kHz ~ 1.0 GHz 소재지-2
KS C 9816-1-5:2023 전자파 방해 및 내성 측정장비와 측정방법 - 제1-5부: 전자파 방해 및 내성 측정장비 - 30 MHz~1000 MHz의 CALTS 및 REFTS 규격 및 유효성 확인 절차 주파수범위 : 30 MHz ~ 1.0 GHz 소재지-2
KS C 9816-2-4:2017 (MOD CISPR 16-2-4:2003) 전자파 방해 및 내성 측정장비와 측정방법 - 제2-4부: 전자파 방해 및 내성 측정방법 - 내성 측정 주파수범위 : 150 kHz ~ 18 GHz 소재지-2
KS C 9816-2-3:2020 (MOD CISPR 16-2-3:2014) 전자파 방해 및 내성 측정장비와 측정방법 - 제2-3부: 전자파 방해 및 내성 측정방법 - 방사성 방해 측정 주파수범위 : 9 kHz ~ 18 GHz 소재지-2
KS C 9816-2-5:2020 (MOD CISPR/TR 16-2-5:2008) 전자파 장해 및 내성 측정장비와 측정방법 - 제2-5부: 대형기기에서 발생하는 방해 방출의 현장 측정 주파수범위 : 9 kHz ~ 18 GHz 소재지-2
KS C 9816-1-1:2022 전자파 방해 및 내성 측정장비와 측정방법 - 제1-1부: 전자파 방해 및 내성 측정장비 - 측정장비 주파수범위 : 9 kHz ~ 18 GHz 소재지-2
KS C 9816-1-2:2022 전자파 방해 및 내성 측정장비와 측정방법 - 제1-2부: 전자파 방해 및 내성 측정장비 - 전도성 방해 측정용 보조장비 주파수범위 : 9 kHz ~ 1.0 GHz 소재지-2
KS C 9816-1-3:2022 전자파 방해 및 내성 측정장비와 측정방법 - 제1-3부: 전자파 방해 및 내성 측정장비 - 측정용 보조장비 - 방해전력 주파수범위 : 30 MHz ~ 1.0 GHz 소재지-2
KS C 9816-1-4:2025 전자파 방해 및 내성 측정장비와 측정방법 - 제1-4부: 전자파 방해 및 내성 측정장비 - 방사성 방해 측정용 안테나 및 시험장 주파수범위 : 9 kHz ~ 18 GHz 소재지-2
EN 301 489-9:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-52:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
V-DIP : ≤75 A		 소재지-2
EN 50121-1:2017 Railway applications - Electromagnetic compatibility
- Part 1: General		 - 소재지-2
EN 301 489-19:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-2:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 2: Specific conditions for radio paging equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-20:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 20: Specific conditions for Mobile Earth Stations (MES)used in the Mobile Satellite Services (MSS)		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-23 V1.5.1:2011 Part 23 : Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeater and ancillary equipment RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
EN 301 489-24 V1.5.1:2010 Part 24 : Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
EN 301 489-25 V2.3.2:2005 Part 25 : Specific conditions for CDMA 1x spread spectrum Mobile Stations and ancillary equipment RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
EN 301 489-26 V2.3.2:2005 Part 26 : Specific conditions for CDMA 1x spread spectrum Base Stations, repeaters and ancillary equipment RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
EN 301 489-27:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) operating in the 402 MHz to 405 MHz bands; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 55011:2016+A2:2021 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz		 소재지-2
EN 55013:2016 Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
 5.3 Disturbance voltage at the mains terminals in the frequency range 150 kHz to 30 MHz
5.6 Measurement of the disturbance power of associated equipment (video recorders excluded) in the frequency range 30 MHz to 1 GHz
5.7 Measurement of radiation in the frequency range 30 MHz to 1 GHz at 3 m distance		 CE : 150 kHz ~ 2.15 GHz
DP : 30 MHz ~ 300 MHz
RE : 30 MHz ~ 1 GHz
RP : 0.9 GHz ~ 18 GHz		 소재지-2
EN 55014-1:2017+A11:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 6 GHz		 소재지-2
EN 61000-4-2:2009 Electromagnetic compatibility (EMC)
- Part 4-2 : Testing and measurement techniques - Electrostatic discharge immunity test		 Voltage : ±30 kV 소재지-2
EN 61000-4-27:2000+A1:2009 Electromagnetic compatibility (EMC)
- Part 4-27 : Testing and measurement techniques -Unbalance, immunity test for equipment with input current not exceeding 16 A per phase		 교류입력전류 : Max. 16 A(각 상당) 소재지-2
EN 61000-4-28:2000+A2:2009 Electromagnetic compatibility (EMC)
- Part 4-28 : Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase		 교류입력전류 : Max. 16 A(각 상당) 소재지-2
EN 61000-4-29:2000 Electromagnetic compatibility (EMC)
- Part 4-29 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests		 직류입력전압 : 600 V 소재지-2
EN 61000-4-3:2020 Electromagnetic compatibility (EMC)
- Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test		 Freq. : 80 MHz ~ 18 GHz
E/F : 30 V/m
현장시험 : Field Uniformity		 소재지-2
EN 301 489-18 V1.3.1:2002 Part 18 : Specific conditions for Terrestrial Trunked Radio (TETRA) equipment RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
EN 301 489-17:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 50121-2:2017 Railway applications - Electromagnetic compatibility
- Part 2: Emission of whole railway system to the outside world		 RE : 9 kHz ~ 1 GHz 소재지-2
EN 50121-3-1:2017 Railway applications - Electromagnetic compatibility
- Part 3-1: Rolling stock - Train and complete vehicle		 RE : 9 kHz ~ 1 GHz 소재지-2
EN 50121-3-2:2016+A1:2019 Railway applications - Electromagnetic compatibility
- Part 3-2: Rolling stock - Apparatus		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±2 kV
SURGE : ±2 kV		 소재지-2
EN 50121-4:2016+A1:2019 Railway applications - Electromagnetic compatibility
- Part 4: Emission and immunity of the signalling and telecommunications apparatus		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±2 kV
SURGE : ±2 kV
MFS : 300 A/m		 소재지-2
EN 50121-5:2017+A1:2019 Railway applications - Electromagnetic compatibility
- Part 5: Emission and immunity of the fixed power supply installations and apparatus		 CE : 150 kHz ~ 30 MHz
RE : 150 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
CS : 150 kHz ~ 80 MHz
Oscillatory waves : 2.5 kV
EFT : ±4 kV
SURGE : ±4 kV
MFS : 300 A/m		 소재지-2
EN 50130-4:2011+A1:2014 Alarm systems
- Part 4 : Electromagnetic compatibility - Product family standard : Immunity requirements for components of fire, intruder hold up, CCTV, access control and social alarm systems		 ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 100 MHz, 10 V
V-DIP : ≤75 A		 소재지-2
EN 50270:2015 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases toxic gases or oxygen CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤ 75 A
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
EN 50498:2010 Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles RE : 30 MHz ~ 1 GHz
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms		 소재지-2
EN 301 489-33:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-3:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;  Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 12015:2020 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission

Equipment more than rated input current 63 A		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A		 소재지-2
EN 12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

Equipment more than rated input current 63 A		 ESD : ±15 kV
RS : 80 MHz ~ 2 GHz, 30 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : ≤75 A		 소재지-2
EN 12895:2015+A1:2019 Industrial trucks - Electromagnetic compatibility

5.2.4 Test of the driving system
5.3.4 Test of driving at zero speed
5.3.5 Test of the driving system at Low rotation speed		 RE : 30 MHz ~ 1 GHz
ESD : ±15 kV
RS : 27 MHz ~ 1 GHz, 10 V/m
MFS : 1 000 A/m		 소재지-2
EN 301 489-1:2017 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-13 V1.2.1:2002 Part 13 : Specific conditions for Citizens Band (CB) radio and ancillary equipment (speech and non-speech) RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
EN 301 489-15 V1.2.1:2002 Part 15 : Specific conditions for commercially for available amateur radio equipment RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
M/F : 30 A/m
V-DIP : (0 ~ 100) %
F/H : ≤16 A		 소재지-2
IEC 61326-1:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : General requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
ESD : Max ±8 kV
RS : 80 MHz ~ 6 GHz, Max 10 V/m
EFT : Max ±2 kV
Surge : Max ±2 kV
CS : 150 kHz ~ 80 MHz, Max 3 V
MFS : Max 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-2
EN 61326-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : General requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 6 GHz, 최대 10 V/m
EFT : 최대 ±2 kV
Surge : 최대 ±2 kV
CS : 150 kHz ~ 80 MHz, 최대 3 V
MFS : 최대 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-2
KS C IEC 61326-1:2008 계측제어 및 실험실 용도를 위한 전기기기－전자기적합성 요구사항－제1부 : 일반 요구사항 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz, 최대 10 V/m
EFT : 최대 ±2 kV
Surge : 최대 ±2 kV
CS : 150 kHz ~ 80 MHz, 최대 3 V
MFS : 최대 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-2
한전일반구매규격(GS-6625-0086:2020) 전자식 전력량계류 시험방법
6.5 전자적합성시험		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±15 kV
RS : 80 MHz ~ 2.7 GHz, 최대 30 V/m
2.7 GHz ~ 6 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±6 kV
CS : 150 kHz ~ 80 MHz, 최대 20 V
Ring wave : 최대 4 kV
Damped oscillatory wave : 최대 4 kV		 소재지-2
ISO 11452-11:2010 Road vehicles — Component test
methods for electrical disturbances from
narrowband radiated electromagnetic
energy
Part 11: Reverberation chamber		 Freq. : 150 MHz ~ 6 GHz
E/F : Max. 100 V/m		 소재지-2
SPS-KEMC 1120-0579:2018 디지털 보호계전기
6.4 : 전자기 적합성(EMC) 시험		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 최대 300 A/m
V-DIP : 0 %, 300 cycle (교류), 5 s (직류)
0 %, 0.5 ~ 25 cycle (교류), 10 ms ~ 1 000 ms (직류)
40 %, 12 cycle (교류), 200 ms (직류)
70 %, 30 cycle (교류), 500 ms (직류)
정격 직류값의 15 %, 100/120 Hz
DOW : 최대 ±2.5 kV
Low CS : 최대 300 V		 소재지-2
한전일반구매규격(GS-6110-0265:2022) 154kV 변압기 보호 IED반
6.2.2.(6)항: EMC 시험
6.2.2.(7)항: 제어전원 이상 시험		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 최대 300 A/m
V-DIP : 0 %, 300 cycle (교류), 5 s (직류)
0 %, 0.5 ~ 25 cycle (교류), 10 ms ~ 1 000 ms (직류)
40 %, 12 cycle (교류), 200 ms (직류)
70 %, 30 cycle (교류), 500 ms (직류)
정격 직류값의 15 %, 100/120 Hz
DOW : 최대 ±4.0 kV
Low CS : 최대 300 V		 소재지-2
한전일반구매규격(GS-6110-0098:2018) 345kV 디지털변전소 혼용운영시스템
5.4 (5)항: EMC 시험		 RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 1.0 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 최대 1 000 A/m
V-DIP : 0 %, 5 cycle (교류), 0.05 s (직류)
40 % 1 cycle (교류), 100 ms (직류)
70 %, 100 ms (직류)
정격 직류값의 10 %,60 Hz
DOW : 최대 ±1.5 kV
Low CS : 최대 30 V		 소재지-2
U.S. Nuclear Regulatory Commission, Regulatory Guide 1.180, Revison 2, 2019 Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems :
3.1 CE101-Conducted emissions, Low Frequency
3.2 CE102-Conducted emissions, High Frequency
3.3 RE101-Radiated emissions, Magnetic Field
3.4 RE102-Radiated emissions, Electric Field
3.5 IEC Emissions Tests
4.1.1 CS101-Conducted susceptibility, Low Frequency
4.1.2 CS114-Conducted susceptibility, High Frequency
4.1.3 IEC Conducted Susceptibility Tests - Power Leads
4.2 EMI/RFI Conducted Susceptibility - Signal
4.3.1 RS101-Radiated susceptibility, Magnetic Field
4.3.2 RS103-Radiated susceptibility, Electric Field
4.3.3 IEC Radiated Susceptibility Tests
5.1 IEEE C62.41 Ring wave and IEC 61000-4-12
5.2 IEEE C62.41 Combination wave and IEC 61000-4-5
5.3 IEEE C62.41 Electrically Fast Transients and IEC 61000-4-4
6. Electrostatic Discharge Testing		 CE, CS : Max. 1 GHz
RE, RS : Max. 10 GHz
전기장 : Max. 10 V/m
자기장 : Max. 183 dBpT
SWC : Max. ±4 kV
ESD : Max. ±15 kV		 소재지-2
한전일반구매규격(GS-6110-0097:2022) 154kV 디지털변전소 혼용운영시스템
5.4 (5)항: EMC 시험		 RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 1.0 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 1000 A/m
V-DIP : 0 %, 5 cycle (교류), 0.05 s (직류)
40 %, 1 cycle (교류), 100 ms (직류)
70 %, 100 ms (직류)
정격 직류값의 -20 % ~ +10 % 전압변동, 10 s
정격 직류값의 10 %, 60 Hz
DOW : 최대 ±1.5 kV
Low CS : 최대 30 V		 소재지-2
IEC 62236-1:2018 Railway applications - Electromagnetic compatibility
- Part 1: General		 - 소재지-2
IEC 62233:2005 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Freq. : 1 Hz ~ 400 kHz 소재지-2
IEC 62040-2:2016 Uninterruptible power systems(UPS)
- Part 2 : Electromagnetic compatibility(EMC) requirements		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : 16 A per phase or less		 소재지-2
IEC 61547:2020 Equipment for general lighting purposes - EMC immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-2
IEC 61326-2-5:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-2
IEC 61326-2-4:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices  according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-2
IEC 61326-2-2:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-2
IEC 61326-2-1:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-2
IEC 61000-6-4:2018 Electromagnetic compatibility (EMC)
- Part 6-4 : Generic standards - Emission standard for industrial environments		 CE : 150 kHz ~ 6 GHz
RE : 30 MHz ~ 6 GHz		 소재지-2
IEC 61000-6-3:2020 Electromagnetic compatability (EMC)
- Part 6-3: Generic Standards - Emission Standard for equipment in residential environments		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A		 소재지-2
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC)
- Part 6-2 : Generic standards - Immunity for industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
AS/NZS CISPR 15:2025 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.2 Insertion loss
4.4.1 Table 3a - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 300 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
ABNT NBR IEC/CISPR 25 (2010) Vehicles, vessels and internal combustion engines - Charateristics of radio frequency disturbances - Limits and measurement methods for protecting on-board receivers CE-V : 150 kHz ~ 108 MHz
CE-S : 150 kHz ~ 108 MHz
RE : 150 kHz ~ 2.5 GHz		 소재지-2
ITU-T K.152 (2022) Electromagnetic compatibility requirements for power equipment in telecommunications facilities CE : 9 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic, flicker 교류입력전류 : Max. 75 A(각 상당)

ESD : ±8 kV
RS: 80 MHz ~ 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m,
V-DIP : ≤ 75 A		 소재지-2
ISO 7637-2:2004 Road vehicles - Electrical disturbances from conduction and coupling - Part 2 : Electrical transient conduction along supply lines only TI : -600 V ~ 300 V
TE : 1 000 ns ~ 1 000 ms		 소재지-2
ABNT NBR IEC/CISPR 11 (2020) Industrial, scientific and medical equipment
- Radio-frequency
disturbance charactristics - Limits and methods of measurement		 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz		 소재지-2
ABNT NBR IEC/CISPR 14-1 (2021) Electromagnetic compatibility
- Requirements for household appliances,
electric tools and similar apparatus Part 1: Emission		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz		 소재지-2
ITU-T K.116 (2019) Electromagnetic compatibility requirements and test methods for radio telecommunications terminal equipment CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic, flicker 교류입력전류 : Max. 75 A(각 상당)

ESD : ±8 kV
RS: 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
TI : -600 V ~ 300 V
V-DIP : ≤ 75 A		 소재지-2
ABNT NBR IEC/CISPR 15 (2019) Limits and methods and measurement of radio disturbance characteristics of electrical lighting and similar equipment CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
ABNT NBR IEC/CISPR 32 (2021) Electromagnetic compatibility of multimedia equipment - Emission requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-2
ABNT NBR IEC/CISPR 35 (2021) Electromagnetic compatibility of multimedia equipment - Immunity requirements ESD : ±8 kV
RS: 80 MHz ~ 5 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 1 A/m
V-DIP : ≤ 75 A
SPL : 0.15 MHz ~ 1 GHz		 소재지-2
ABNT NBR IEC 61000-4-2 (2013) Electromagnetic compatibility Part 4-2: Testing and measurement techniques — Electrostatic discharge immunity test Voltage : ±30 kV 소재지-2
ABNT NBR IEC 61000-4-4 (2015) Electromagnetic Compatibility Part 4-4: Testing and Measurement Techniques — Electrical fast transients/burst Voltage : ±7 kV 소재지-2
ABNT NBR IEC 61000-4-5 (2020) Electromagnetic compatibility Part 4-5: Testing and measurement techniques — Surge immunity test Voltage : ±7 kV 소재지-2
ABNT NBR IEC 61000-4-6 (2019) Electromagnetic compatibility Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-2
ABNT NBR IEC 61000-6-3 (2022) Electromagnetic compatibility: ac (EMC) Part 6-3: Generic standard - Emission standard for equipment in residential environments CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic, flicker 교류입력전류 : Max. 75 A(각 상당)		 소재지-2
ITU-T Rec. K.44 (10/2019) Resistivity tests for telecommunications equipment exposed to overvoltages and overcurrents - Basic recommendation - 소재지-2
ITU-T K.137 (2022) Electromagnetic Compatibility Requirements and Measurement Methods for wireline Telecommunications Network Equipment CE : 9 kHz ~ 30 MHz
RE : 30 MHz ~ 40 GHz
Harmonic, flicker 교류입력전류 : Max. 75 A(각 상당)

ESD : ±15 kV
RS: 80 MHz ~ 6 GHz, 20 V/m
EFT : ±2 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : ≤ 75 A		 소재지-2
ITU-T K.114 (2022) Electromagnetic Compatibility Requirements and Measurement Methods for Digital Cellular Mobile Communication Base Station Equipment CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 40 GHz
Harmonic, flicker 교류입력전류 : Max. 75 A(각 상당)

ESD : ±8 kV
RS: 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : ≤ 75 A		 소재지-2
ITU-T K.123 (2022) Electromagnetic compatibility requirements for electrical equipment in telecommunications facilities CE : 9 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic, flicker 교류입력전류 : Max. 75 A(각 상당)		 소재지-2
IEC 61000-4-11:2004 Electromagnetic Compatibility (EMC): Part 4-11: Test and Measurement Techniques — Voltage dips, short interruptions and voltage variations; immunity tests 교류입력전류 : Max. 16 A (각 상당) 소재지-2
한전일반구매규격(GS-6110-0074:2022) 154kV 변압기 보호배전반
6.2.2.(6)항: EMC 시험
6.2.2.(7)항: 제어전원 이상 시험		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 최대 300 A/m
V-DIP : 0 %, 300 cycle (교류), 5 s (직류)
0 %, 0.5 ~ 25 cycle (교류), 10 ms ~ 1 000 ms (직류)
40 %, 12 cycle (교류), 200 ms (직류)
70 %, 30 cycle (교류), 500 ms (직류)
정격 직류값의 15 %, 100/120 Hz
DOW : 최대 ±4.0 kV
Low CS : 최대 300 V		 소재지-2
한전일반구매규격(GS-6110-0039:2022) 154kV 송전선로 보호배전반
6.2.2.(6)항: EMC 시험
6.2.2.(7)항: 제어전원 이상 시험		 RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 2.7 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 최대 300 A/m
V-DIP : 0 %, 300 cycle (교류), 5 s (직류)
0 %, 0.5 ~ 25 cycle (교류), 10 ms ~ 1 000 ms (직류)
40 %, 12 cycle (교류), 200 ms (직류)
70 %, 30 cycle (교류), 500 ms (직류)
정격 직류값의 15 %, 100/120 Hz
DOW : 최대 ±4.0 kV
Low CS : 최대 300 V		 소재지-2
한전일반구매규격(GS-6110-0094:2022) 154kV 디지털변전소 운영시스템
5.4 (5)항: EMC 시험		 RE : 30 MHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 1.0 GHz, 최대 10 V/m
EFT : 최대 ±4 kV
Surge : 최대 ±4 kV
CS : 150 kHz ~ 80 MHz, 최대 10 V
MFS : 최대 1 000 A/m
V-DIP : 0 %, 5 cycle (교류), 0.05 s (직류)
40 %, 1 cycle (교류), 100 ms (직류)
70 %, 100 ms (직류)
정격 직류값의 -20 % ~ +10 % 전압변동, 10 s
정격 직류값의 10 %, 60 Hz
DOW : 최대 ±1.5 kV
Low CS : 최대 30 V		 소재지-2
KS R ISO 7637-3:2015 도로 차량 - 전도와 커플링에 의한 전기적인 방해 - 제3부 : 전원 공급선 이외의 전선을 통한 용량성과 유도성 커플링에 의한 전기적인 과도 전송 TI : -120 V ~ 80 V 소재지-2
KS R ISO 7637-2:2015 도로 차량 - 전도와 커플링에 의한 전기적인 방해 - 제2부 : 전원 공급선만의 전기적인 과도 전도 TI : -600 V ~ 300 V
TE : 1 000 ns ~ 1 000 ms		 소재지-2
KS R ISO 7637-1:2015 도로 차량 - 전도와 커플링에 의한 전기적인 방해 - 제1부 : 정의 및 일반 고려사항 - 소재지-2
KS C IEC 62236-5:2011 철도용 전기자기적합성 - 제5부 : 고정전력 공급 설비와 장치의 방출 및 내성 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.5 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±4 kV
SURGE : ±4 kV
MFS : 300 A/m		 소재지-2
KS C IEC 62236-4:2011 철도용 전기자기적합성 - 제4부 : 신호처리 및 통신 장치의 방출 및 내성 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.5 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±2 kV
SURGE : ±2 kV
MFS : 300 A/m		 소재지-2
KS C IEC 62236-3-2:2011 철도용 전기자기적합성 - 제3-2부 : 철도차량 -장치 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.5 GHz
CS : 150 kHz ~ 80 MHz
EFT : ±2 kV
SURGE : ±2 kV		 소재지-2
KS C IEC 60601-1-2:2020 의료용 전기기기 - 제1-2부 : 기본안전 및 필수성능에 관한 일반 요구사항 - 보조 표준 : 전자파 방해 - 요구사항 및 시험 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
KS C IEC 60947-1:2014 저압 개폐장치 및 제어장치 - 제1부: 일반 규정
7.3 전자기 적합성(EMC)		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
MFE : 9 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
KS C IEC 61000-3-12:2013 전기자기적합성(EMC) - 제3-12부 : 한계값 - 공공 저전압 시스템에 연결된 기기에서 발생하는 고조파 전류의 한계값 (16 A < 상당입력전류 ≤ 75 A) 교류입력전류 : Max. 75 A (각 상당) 소재지-2
KS C IEC 61000-4-12:2017 전기자기적합성(EMC) - 제4-12부 : 시험 및 측정 기술 - 링 파 내성 시험 Voltage : ±4 kV 소재지-2
KS C IEC 61000-4-13:2015 전기자기적합성(EMC) - 제4-13부 : 시험 및 측정기술 - 교류전원 포트에서 주전원 신호를 포함하는 고조파와 상호고조파, 저주파 내성 시험 Freq. : 16 Hz ~ 2.4 kHz
Voltage : U1 × 12 %		 소재지-2
KS C IEC 61000-4-14:2010 전기자기적합성(EMC) - 제4-14부 : 시험 및 측정 기술 - 상당 입력전류가 16 A 이하인 기기의 전압 변동 내성 시험 Voltage : ±12 % Un 소재지-2
KS C IEC 61000-4-17:2010 전기자기적합성(EMC) - 제4-17부 : 시험 및 측정기술 - 직류 입력 전원 포트에서의 맥동 내성 시험 직류입력전류 : Max. 600 V 소재지-2
KS C IEC 61000-4-27:2014 전기자기적합성(EMC) - 제4-27부 : 시험 및 측정기술 - 상당 16 A 미만의 입력전류를 가진 기기에 대한 불평형 내성시험 교류입력전류 : Max. 16 A (각 상당) 소재지-2
KS C IEC 61000-4-28:2010 전기자기적합성(EMC) - 제4-28부 : 시험 및 측정기술 - 상당 입력전류가 16 A 이하인 기기의 전원 주파수 변화 내성 시험 교류입력전류 : Max. 16 A (각 상당) 소재지-2
KS C 9040-2:2025 무정전전원장치(UPS)－제2부：전자기적합성(EMC) 요구사항 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz		 소재지-2
KS C IEC 62236-1:2018 철도 적용 - 전기자기적합성 - 제1부 : 일반사항 - 소재지-2
KS R ISO 11452-1:2025 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제1부 : 일반 원리 및 용어 - 소재지-2
KS R ISO 11452-2:2013 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제2부 : 흡수재 차폐실 Freq. : 80 MHz ~ 18 GHz
E/F : 200 V/m		 소재지-2
KS C 9815:2023 조명 기기 및 유사 기기의 무선
방해 특성 측정 허용기준과 측정 방법
<제외항목>
4.5.2항 표8의 방사성 방해 허용기준 중 3 m, 4 m 루프 측정		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
KS C 9814-2:2022 (MOD CISPR 14-2:2020) 전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부：내성 ESD : ±30 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
MFS : 10 A/m
V-DIP : ≤75 A		 소재지-2
KS C 9814-1:2022 (MOD CISPR 14-1:2020) 전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부：방출 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 30 MHz ~ 1 GHz		 소재지-2
KS C 9811:2019 (MOD CISPR
11:2016)		 산업, 과학, 의료용(ISM)기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
<제외항목>
6.3.2.3항 표10 방사성 방해 허용기준 (거리 30 m)		 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
KS C 0262:2024 전기자기적합성(EMC) - 측정 일반
<제외항목>
KS C CISPR 13, KS C CISPR 15 및 KS C CISPR 20		 CE, CS : Max. 1 GHz
RE, RS : Max. 18 GHz		 소재지-2
KS C CISPR 25:2021 차량과 보트 및 내연기관 - 무선 방해 특성 - 장착된 수신기 보호를 위한 측정 한계값과 측정 방법
<제외 항목>
제5부 : 동일한 차량의 안테나에 의해 수신된 방출측정
제6부 : 5 ~ 6. 컴포넌트/모듈로부터의 복사성 방출 - TEM 셀(cell) 법, 스트립라인(stripline) 법		 CE : 150 kHz ~ 108 MHz
RE : 150 kHz ~ 2.5 GHz		 소재지-2
KS C IEC 60255-26:2015 전기 계전기 - 제26부 : 전자기적합성 요구사항 RE : 30  MHz~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±4 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz
Low CS : 0 kHz ~ 150 kHz
MFS : 300 A/m
V-DIP : ≤75 A
DOW : ±2.5 kV		 소재지-2
KS C IEC 60533:2003 선박용 전기 설비 - 전기 자기 적합성
<제외항목>
장비 및 설비그룹F : 비 전기품목+장비		 CE : 10 kHz ~ 30 MHz
RE : 150 kHz ~ 2 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±1 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
Low CS : 50 Hz ~ 10 kHz		 소재지-2
IEC 61000-3-11:2017 Electromagnetic compatibility (EMC)
- Part 3-11 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection		 AC input current : Max. 75 A (per phase) 소재지-2
IEC 60947-1:2020 Low-voltage switchgear and control gear
- Part 1 : General rules		 RE : 9 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ± 2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-2
IEC 60945:2002 Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results

 7.1 Extreme power supply
8 Durability and resistance to environmental conditions Methods of testing and required test results
 11 Special purpose tests - Methods of testing and required test results
 12 Safety precautions - Methods of testing and required test results(all equipment categories)		 CE : 150 kHz ~ 30 MHz
RE : 150 kHz ~ 2 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±1 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : ≤75 A		 소재지-2
IEC 60601-1-2:2014+A1:2020 Medical electrical equipment - Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbance - Requirements and tests CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull

Equipment and installation group F : non - electrical items + equipment		 RE : 150 kHz ~ 2 GHz
CE : 10 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 Vrms
Low CS : 50 Hz ~ 10 kHz
V-DIP : ≤75 A		 소재지-2
IEC 60255-26:2013 MEASURING RELAYS AND PROTECTION EQUIPMENT - Part 26: Electromagnetic compatibility requirements RE : 30  MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±4 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz
Low CS : 0 kHz ~ 150 kHz
MFS : 300 A/m
V-DIP : ≤75 A
DOW : ±2.5 kV		 소재지-2
KS R ISO 11452-4:2013 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제4부 : 배선 여기법 BCI : 1 MHz ~ 400 MHz, 200 mA
TWC : 400 MHz ~ 3 GHz, 33 dBm		 소재지-2
KS C IEC 62236-2:2018 철도 적용 - 전기자기적합성 - 제2부 : 전체 철도 시스템에서 외부로 나가는 방출 RE : 9 kHz ~ 1 GHz 소재지-2
KS C IEC 62236-3-1:2018 철도 적용 - 전기자기적합성 - 제3-1부 : 철도차량 -열차 및 공차 RE : 9 kHz ~ 1 GHz 소재지-2
KS C 9610-3-11:2023 전자파적합성(EMC) - 제3-11부: 허용기준 - 공공 저압 배전망에서의 전압변동 및 플리커에 대한 허용기준 (상당 정격전류 75 A 이하와 조건부 연결 기기) 교류입력전류 : Max. 75 A (각 상당) 소재지-2
국립전파연구원고시 제2021-24호 (2021.12.10) 고출력ㆍ누설 전자파 안전성 평가기준 및 방법 등에 관한 고시 방사성 방호성능 기준 및 측정방법: 10kHz ~ 18 GHz
전도성 방호성능 기준 및 측정방법
- 펄스전류주입 : 단펄스 최대 5 kA, 중펄스 최대 250 A
- 삽입손실 : 10 kHz ~ 18 GHz		 소재지-2
ISO 11452-9:2021 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9 : Portable transmitters Freq. : 26 MHz ~ 5.85 GHz 소재지-2
CISPR 25:2021 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limit and methods of measurement for the protection of on-board receivers

 5 Measurement of emissions received by an antenna on the same vehicle
 6.6 Radiated emissions from components/modules - TEM cell method
 6.7 Radiated emissions from components/modules - Strip line method		 CE-V : 150 kHz ~ 108 MHz
CE-S : 150 kHz ~ 245 MHz
RE : 150 kHz ~ 5.925 GHz		 소재지-2
IEC 62052-11:2020 Electricity metering equipment - General requirements, tests and test conditions - Part 11 : Metering equipment(9.3 Electromagnetic compatibility (EMC)
9.3.12 External static magnetic fields		 CE :150 kHz ~ 30 MHz
RE ：30 MHz ~ 6 GHz
ESD : ±15 kV
RS : 30 V/m
EFT : ±4 kV
Surge : ±4 kV
CS : 10 V
MFS : 400 A/m
V-dip ≤16 A or V-dip 〉 16 A
Ring Wave : ±4 kV
Damped oscillatory wave : ±2.5 kV
DM CS : 3 A
DC-dip : 100 %, 60 %, 30 %		 소재지-2
IEC 62003:2020 Nuclear power plants - Instrumention, control and electrical power systems - Requirements for electromagnetic compatibility testing CE :150 kHz ~ 30 MHz
RE ：30 MHz ~ 6 GHz
ESD : ±15 kV
RS : 10 V/m
EFT : ±4 kV
Surge : ±2 kV
CS : 10 V
MFS : 10 A/m
Pulse MFS : 100 A/m
Damped oscillatory MFS : 10 A/m
V-dip ≤16 A or V-dip 〉 16 A
Ring Wave : ±2 kV
Power Frequency harmonics :
Fre. 16 Hz ~ 2.4 kHz
Voltage U1 × 12 %
Voltage fluctuation : ±12 %
Low CS : 10 V (continuous)
100 V (short)
Ripple : 10 %
Damped oscillatory wave :
2 kV (slow)
2 kV (fast)
Power freq. variation : ±4 %, -6 %		 소재지-2
IEC 61000-4-34:2005+AMD1:2009+AMD2:2025 Electromagnetic compatibility (EMC) - Part 4-34 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase 0 %, 1 cycle
40 %, (10/12) cycles (50/60) Hz
70 %, (25/30) cycles (50/60) Hz
80 %, (250/300) cycles (50/60) Hz
0 %, (250/300) cycles (50/60) Hz		 소재지-2
IEC 61000-4-10:2016 Electromagnetic compatibility (EMC) - Part 4-10 : Testing and measurement techniques - Damped oscillatory magnetic field immunity test field strength (10 ~ 100) A/m 소재지-2
KS C 9610-3-12:2023 전기자기적합성(EMC)
- 제3-12부 : 허용기준 - 공공 저압 배전망에 연결된 기기에서 발생하는 고조파 전류의 허용기준 (16 A < 상당입력전류 ≤ 75 A)		 교류입력전류 : Max. 75 A (각 상당) 소재지-2
EN 301 489-50 V2.2.1 (2019-04) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
ISO 11452-3:2024 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy
- Part 3: Transverse electromagnetic (TEM) cell		 Freq. : 10 kHz ~ 200 MHz
E/F : 200 V/m		 소재지-2
EN 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19 : Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports LFCS: (2 to 150) kHz, 20 V 소재지-2
IEC 61000-6-8:2020 Electromagnetic Compatability (EMC)
- Part 6-8 : Generic Standards - Emission Standard for professional equipment in commercial and light-Industrial locations		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-2
IEC 61204-3:2016 Low voltage power supplies, d,c. output - Part 3: Electromagnetic Compatibility(EMC) ESD: ±8 kV
RS: Max 10 V/m(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 2 kV
Surge: Max 2 kV
CS: Max 10 V(0.15 MHz ~ 230 MHz)
MFS: 30 A/m
V-DIP: ≤75 A		 소재지-2
EN 61204-3:2018 Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility(EMC) ESD: ±8 kV
RS: Max 10 V/m(80 MHz ~ 2.7 GHz)
EFT/Burst: Max 2 kV
Surge: Max 2 kV
CS: Max 10 V(0.15 MHz ~ 230 MHz)
MFS: 30 A/m
V-DIP: ≤75 A		 소재지-2
IEC 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19 : Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports LFCS: (2 to 150) kHz, 20 V 소재지-2
EN 60255-22-7:2003 Electrical relays - Part 22-7 : Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests DM: 150 V CM: 300 V 소재지-2
EN 50155:2021 Railway applications - Rolling stock - Electronic equipment

13.4.4 Low temperature start-up test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Cyclic damp heat test
13.4.9 Insulation test
13.4.10 Salt mist test
13.4.11 Vibration and shock test
13.4.12 Enclosure protection test (IP code)
13.4.13 Stress screening test
13.4.14 Rapid Temperature variation test		 CE: 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±30 kV
RS: 80 MHz ~ 6 GHz
EFT: ±4 kV
Surge: ±6 kV
CS: 150 kHz ~ 230 MHz
MFS: 300 A/m
V-DIP: ≤75 A		 소재지-2
EN 13309:2010 Construction machinery - Electromagnetic compatibility of machines with internal power supply

4.2 Specifications concerning broadband electromagnetic emission radiated from construction machinery
4.3 Specifications concerning narrowband electromagnetic emission radiated from construction machinery
4.4 Specifications concerning the immunity of construction machinery
to electromagnetic radiation
4.7.2 Stripline Test - TEM Cell Test		 RE : 30 MHz ~ 1 GHz
RI : 20 MHz ~ 2 GHz
BCI : 1 MHz ~ 400 MHz
ESD : ±25 kV
CTI : (-600 ~ 300) V
CTE : (-450 ~ 150) V		 소재지-2
KS C 9990:2017 자동차 및 내연기관 구동기기류 전자파적합성(EMC) 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms
EFT : ±2 kV
Surge : ±2 kV
HF : ≤ 64 A		 소재지-2
KS C 9547:2023 일반 조명기기 - 전자파적합성(EMC) 내성 요구사항 ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-2
KS C 9610-6-4:2022
(MOD IEC 61000-6-4:2018)		 전자파적합성(EMC) - 제6-4부: 일반 표준 - 산업 환경에서 전자파 방출 표준 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-2
KS C 9610-6-3:2023 전자파적합성(EMC) - 제6-3부: 일반기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A		 소재지-2
KS C 9610-6-2:2019 (MOD IEC 61000-6-2:2016) 전자파적합성(EMC)
- 제6-2부: 일반표준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
KS C 9610-6-1:2019 (MOD IEC 61000-6-1:2016) 전자파적합성(EMC)
- 제6-1부: 일반표준-주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-2
KS C 9610-4-11:2020
(MOD IEC 61000-4-11:2004)		 전자파적합성(EMC) - 제4-11부: 시험 및 측정 기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 교류입력전류 : Max. 16 A (각 상당) 소재지-2
KS C 9610-4-9:2019 전자파적합성(EMC)
- 제 4-9부: 시험 및 측정 기술 - 임펄스 자기장 내성 시험		 자기장 : 1 000 A/m 소재지-2
KS C 9610-4-8:2017
(MOD IEC 61000-4-8:2009)		 전자파적합성(EMC) - 제4-8부: 시험 및 측정 기술 - 전원 주파수 자기장 내성 시험 최대자기장 :
(연속필드) 100 A/m
(짧은지속) 1 000 A/m		 소재지-2
KS C 9610-4-6:2020
(MOD IEC 61000-4-6:2013)		 전자파적합성(EMC) - 제4-6부: 시험 및 측정 기술 - 전도성 RF 전자기장 내성 시험 Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-2
KS C 9610-4-5:2020
(MOD IEC 61000-4-5:2014)		 전자파적합성(EMC) - 제4-5부: 시험 및 측정 기술 - 서지 내성 시험 Voltage : ±7 kV 소재지-2
KS C 9610-4-4:2020
(MOD IEC 61000-4-4:2012)		 전자파적합성(EMC) - 제4-4부: 시험 및 측정 기술 - 전기적 빠른 과도현상, 버스트 내성 시험 전압 : Max. 5.5 kV 소재지-2
KS C 9610-4-3:2017
(MOD IEC 61000-4-3:2010)		 전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성 시험 Freq. : 80 MHz ~ 6 GHz
E/F : 10 V/m
현장시험 : Field Uniformity		 소재지-2
KS C 9610-4-2:2017
(MOD IEC 61000-4-2:2008)		 전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성 시험 전압 : Max. 30 kV 소재지-2
KS C 9610-3-3:2023 전자파적합성(EMC) - 제3-3부: 허용기준 - 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준 (상당 16 A 이하 기기) 교류입력전류 : Max. 16 A (각 상당) 소재지-2
KS C 9610-3-2:2023 전자파적합성(EMC) - 제3-2부: 허용기준 - 고조파 전류의 허용기준 (상당 입력 전류 16 A 이하 기기) 교류입력전류 : Max. 16 A (각 상당) 소재지-2
IEC 61000-3-12:2011+AMD1:2021 Electromagnetic compatibility (EMC)
- Part 3-12 : Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current ＞16 A and ≤75 A per phase		 AC input current : Max. 75 A (per phase) 소재지-2
EN 301 489-51 V2.1.1 (2019-04) ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 51: Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz; Harmonised Standard covering the essential requirements of article
3.1(b) of Directive 2014/53/EU		 ESD: ±30 kV
RS: Max. 10 V/m
(80 MHz ~ 6 GHz)
EFT/Burst: ±4 kV
Surge: ±6 kV
CS: Max. 10 V
(0.15 MHz ~ 230 MHz)
MFS: 30 A/m
V-DIP: ≤75 A		 소재지-2
MIL-STD-461G:2015 Department of Defense Interface Standard, Requirements for the control of Electromagnetic Interference Characteristics of Subsystems and Equipment
5.4 CE101, conducted emissions, audio frequency currents, power leads
5.5 CE102, conducted emissions, radio frequency potential, power leads
5.7 CS101, conducted susceptibility, power leads
5.12 CS114, conducted susceptibility, bulk cable injection
5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation
5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads
5.16 CS118, personnel borne electrostatic discharge
5.17 RE101, radiated emissions, magnetic field
5.18 RE102, radiated emissions, electric field
5.20 RS101, radiated susceptibility, magnetic field
5.21 RS103, radiated susceptibility, electric field


5.21.4 RS103 alternative test procedures - reverberation chamber		 CE101: 30 Hz ~ 10 kHz
CE102: 10 kHz ~ 10 MHz
CS101: 30 Hz ~ 150 kHz, Max. 136 dBμV
CS114: 4 kHz ~ 200 MHz, Max. 109 dBμA
CS115: Max. 5 A
CS116: 10 kHz ~ 100 MHz, Max. 10 A
CS118: Contact/Air, ±15 kV
RE101: 30 Hz ~ 100 kHz
RE102: 10 kHz ~ 18 GHz
RS101: 30 Hz ~ 100 kHz, Max. 183 dBpT
RS103: 2 MHz ~ 18 GHz, Max. 50 V/m		 소재지-2
EN 61000-3-11:2019 Electromagnetic compatibility (EMC)
- Part 3-11 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection		 교류입력전류 : Max. 75 A(각 상당) 소재지-2
EN 61000-3-12:2011+A1:2024 Electromagnetic compatibility (EMC)
- Part 3-12 : Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current ＞16 A and ≤75 A per phase		 교류입력전류 : Max. 75 A(각 상당) 소재지-2
EN 61000-3-2:2019+A1:2021 Electromagnetic compatibility (EMC)
- Part 3-2 : Limits - Limits for harmonic current emissions (equipment input current ≤16 A per Phase)		 교류입력전류 : Max. 16 A(각 상당) 소재지-2
EN 61000-3-3:2019 Electromagnetic compatibility (EMC)
- Part 3-3 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection		 교류입력전류 : Max. 16 A(각 상당) 소재지-2
EN 61000-4-11:2020 Electromagnetic compatibility (EMC)
- Part 4-11 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests		 교류입력전류 : Max. 16 A(각 상당) 소재지-2
EN 61000-4-12:2017 Electromagnetic compatibility (EMC)
- Part 4-12 : Testing and measurement techniques -Ring wave immunity test		 Voltage : ±4 kV 소재지-2
EN 61000-4-13:2016 Electromagnetic compatibility (EMC)
- Part 4-13 : Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests		 Freq. : 16 Hz ~ 2.4 kHz
Voltage : U1 × 12 %		 소재지-2
AS/NZS CISPR 32:2015+AMD1:2020 Electromagnetic compatibility of multimedia equipment - Emission requirements CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-2
KS C 9832:2024 멀티미디어 기기 전자파 방해 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-2
KS C 9835:2019 (MOD CISPR 35:2016) 멀티미디어 기기 전자파 내성 시험방법 ESD : ±8 kV
RS: 80 MHz ~ 5 GHz, 3 V/m
EFT: ±1 kV
Surge: ±2 kV
CS: 150 kHz ~ 80 MHz, 3 V
MFS: 1 A/m
V-DIP: ≤ 75 A
SPL: 0.15 MHz ~ 1 GHz		 소재지-2
KS X 3124:2024 무선설비 기기류의 공통 전자파적합성 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3125:2024 특정 소출력 무선기기 전자파적합성 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3127:2024 간이무선국 및 TETRA 전자파적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3128:2024 디지털코드 없는 전화기 전자파적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3130:2024 음성 및 음향 신호 전송용 특정 소출력 무선기기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3131:2024 생활 무전기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3136:2024 아마추어 무선국용 무선설비 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 60947-1:2021 Low-voltage switchgear and control gear - Part 5-1 : Control circuit devices and switching elements - electromechanical control circuit devices 7.3 Electro-Magnetic Compatibility CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
MFE : 9 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 30 A/m
V-DIP : ≤16 A		 소재지-2
EN 60945:2002 Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results
 9 Electromagnetic emission
 10 Immunity to electromagnetic environment		 CE : 10 kHz ~ 30 MHz
RE : 150 kHz ~ 2 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±1 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : ≤75 A		 소재지-2
EN 61000-4-6:2014 Electromagnetic compatibility (EMC)
- Part 4-6 : Testing and measurement techniques - Immunity to conducted disturbance, induced by radio-frequency fields		 Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-2
EN 61000-4-8:2010 Electromagnetic compatibility (EMC)
- Part 4-8 : Testing and measurement techniques - Power frequency magnetic field immunity test		 최대 자기장 :
(연속 필드) 100 A/m
(짧은 지속) 1 000 A/m		 소재지-2
EN 61000-4-9:2016 Electromagnetic compatibility (EMC)
- Part 4-9 : Testing and measurement techniques - Pulse magnetic field immunity test		 Pulse MFS : 1 000 A/m 소재지-2
EN 61000-6-1:2019 Electromagnetic compatibility (EMC)
- Part 6-1 : Generic standards - Immunity for residential, commercial and light-industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤75 A		 소재지-2
EN 61000-6-2:2019 Electromagnetic compatibility (EMC)
- Part 6-2 : Generic standards - Immunity for industrial environments		 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
EN 61000-6-3:2021 Electromagnetic compatibility (EMC)
- Part 6-3 : Generic standards - Emission standard for residential, commercial and light-industrial environments		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
RE : Max. 18 GHz		 소재지-2
EN 61000-6-4:2019 Electromagnetic compatibility (EMC)
- Part 6-4 : Generic standards - Emission standard for industrial environments		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-2
EN 61326-2-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 3 A/m
V-DIP : ≤16 A		 소재지-2
EN 61326-2-2:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
MFS : 3 A/m
V-DIP : ≤16 A		 소재지-2
EN 61000-4-16:2016 Electromagnetic compatibility (EMC)
- Part 4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz		 최대전압 :
(연속 인가) 30 Vrms
(짧은 지속) 300 Vrms		 소재지-2
EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC)
- Part 4-14 : Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase		 Voltage : ±12 % Un 소재지-2
EN 55014-2:2021 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : Immunity - Product family standard ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
V-DIP : ≤75 A		 소재지-2
EN 55015:2019+A11:2020 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m
and 4 m)		 CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 1 GHz
MFE: 9 kHz ~ 30 MHz		 소재지-2
EN 55032:2020 Electromagnetic compatibility of multimedia equipment - Emission Requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-2
EN 55035:2017+A11:2020 Electromagnetic compatibility of multimedia equipment - Immunity Requirements ESD : ±8 kV
RS: 80 MHz ~ 5 GHz, 3 V/m
EFT: ±1 kV
Surge: ±2 kV
CS: 150 kHz ~ 80 MHz, 3 V
MFS: 1 A/m
V-DIP: ≤75 A
SPL: 0.15 MHz ~ 1 GHz		 소재지-2
EN 60601-1-2:2015+A1:2021 Medical electrical equipment - Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbances - Requirements and tests CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : ≤75 A		 소재지-2
KS X 3126:2024 무선데이터 통신시스템용 특정 소출력 무선기기 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
IEC 62920:2017+AMD1:2021 Photovoltaic power generating systems - EMC requirements and test methods for power conversion equipment CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz
ESD: ±8 kV
RS: 80 MHz ~ 6 GHz
EFT: ±1 kV
Surge: ±2 kV
CS: 150 kHz ~ 80 MHz
MFS: 3 A/m
V-DIP: ≤75 A		 소재지-2
SPS-SGSF-025-4-1972:2022 전기에너지저장시스템용 전력변환장치의 성능 요구사항
7.5 전자파 적합성 시험		 CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz
ESD: ±15 kV
RS: 80 MHz ~ 2.7 GHz
EFT: ±4 kV
Surge: ±4 kV
CS: 150 kHz ~ 80 MHz
MFS: 1,000 A/m		 소재지-2
KS X 3132:2014 주파수 공용 무선전화장치 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3134:2024 체내이식 무선의료기기 전자파적합성 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
KS X 3139:2024 위성 휴대통신용 무선설비 전자파 적합성 시험 방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 % ~ 100 %
H/F : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 61000-4-5:2014+A1:2017 Electromagnetic compatibility (EMC)
- Part 4-5 : Testing and measurement techniques - Surge immunity test		 Surge : ±7 kV 소재지-2
▶ 에너지효율
IEC 62552-1:2015+AMD1:2020 Household Refrigerating Appliances - Characteristics And Test Methods Part 1 : General Requirements 10 kW or less 소재지-2
IEC 62552-2:2015+AMD1:2020 Household Refrigerating Appliances - Characteristics And Test Methods Part 2 : Performance requirements 10 kW or less 소재지-2
KS C IEC 62109-2:2011 태양광 발전 시스템용 전력변환장치의 안전성-제2부:인버터에 대한 특정 요구사항
4.8 계통 연계형 인버터에 대한 추가 시험		 1 kW 초과 250 kW 이하
(DC 1 500 V, AC 500 V)		 소재지-2
IEC 62552-3:2015+AMD1:2020 Household Refrigerating Appliances - Characteristics And Test Methods Part 3 : Energy consumption and volume 10 kW or less 소재지-2
AS-NZS 3823.1.1-2012 Non ducted air conditions and geat pumps-Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
AS-NZS 3823.1.2-2012 Ducted air conditioners and air-to-air heat pumps Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
AS-NZS 3823.3-2002 Performance of electrical appliances-Air conditioners and heat pumps-performance of electrical appliances-Air conditioners and heat pumps(MEPS) requirements (1 160 ~ 87 000) W 소재지-2
DGNTI-COPANIT506:2017 Energy efficiency of central, package or split type air conditioners. Limits, test methods. (1 160 ∼ 87 000) W 소재지-2
DGNTI-COPANIT507:2017 Energy efficiency for room air conditioners. Limits, test methods. (1 160 ∼ 87 000) W 소재지-2
DGNTI-COPANIT508:2017 Energy efficiency for separated assemblies, free discharge and non-ducted air conditioners. limits and test methods (1 160 ∼ 87 000) W 소재지-2
SASO 2874:2016 Commercial Air Conditioners - Minimum Energy Performance Requirements and Testing Requirements (1 160 ~ 87 000) W 소재지-2
SASO 2893:2018 ROTATING ELECTRICAL MACHINES - Part 30-1: Efficiency classes of line operated AC motors (IE code) (IEC 60034-30-1:2014 Ed 1.0, MOD) 삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
TCVN 7540-1:2013 High efficiency three-phase asynchronous squirrel cage electrical motors - Part 1: Minimum energy performance 단상: 400 V 이하
삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
TCVN 7540-2:2013 High efficiency three-phase asynchronous squirrel cage electrical motors - Part 2: Methods for determination of performance 단상: 400 V 이하
삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
TCVN 7828:2016 Refrigerator, refrigerator-freezer -Energy Efficiency 1 000 L 이하 소재지-2
TCVN 7829:2016 Refrigerator, refrigerator-freezer -Method for determination of energy Efficiency 1 000 L 이하 소재지-2
TCVN 7830:2007 Air - conditioners - Energy efficiency Ratio (1 160 ∼ 14 000) W 소재지-2
TCVN 7830:2012 Non-Ducted air conditioner-Energy efficiency (1 160 ∼ 14 000) W 소재지-2
TCVN 7830:2015 Non - ducted air conditioners - Energy efficiency (1 160 ∼ 14 000) W 소재지-2
TCVN 7831:2012 Non-Ducted air conditioner-Method for determination of energy efficiency (1 160 ~ 87 000) W 소재지-2
AS/NZS 4474.1:2007/Amdt2:2011 Performance of household electrical appliances - Refrigerating appliances - Energy consumption and performance 10 kW 이하 소재지-2
AS/NZS 5125.1:2014 HeatPump Water Heaters-performance Assessment (1 160 ~ 87 000) W 소재지-2
AS/NZS 5125 Heat Pump Water Heaters - Performance Assessment (1 160 ~ 87 000) W 소재지-2
JIS C 9220:2011  Residential Heatpump Water Heaters (1 160 ~ 87 000) W 소재지-2
JIS C 9612-1994 Room air conditioner (1 160 ~ 87 000) W 소재지-2
JIS C 9612-2013 Room air conditioners (1 160 ~ 87 000) W 소재지-2
ANSI/AHRI 440-2008 Performance Rating of Room Fan-Coils (1 160 ~ 87 000) W 소재지-2
ANSI/ASHRAE 16:1983(R 2014) Method Of Testing For Rating Room Air Conditioners, Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps for Cooling and Heating Capacity (1 160 ~ 87 000) W 소재지-2
ANSI/ASHARE 16-2016 Method of Testing for Rating Room Air Conditioners, Packaged Terminal Air Conditioners, and Packaged Terminal Heat Pumps for Cooling and Heating Capacity 1 160 ~ 87 000) W 소재지-2
ANSI/ASHRAE 37:2009 Methods of testing for rating Electrically driven Unitary Air conditioning and heat pumps equipments (1 160 ~ 87 000) W 소재지-2
AHRI 1230:2009 Performance rating of Variable Refrigerant Flow(VRF) Multi-Split Air-conditioning and Heatpump equipment (1 160 ~ 87 000) W 소재지-2
AHRI 1060:2014 Performance Rating of Airto-Air Exchangers for Energy Recovery Ventilation Equipment 3 000 Nm³/h 이하 소재지-2
AHRI 210/240:2017 Methods of testing for room air conditioners and packaged terminal air conditioner (1 160 ~ 87 000) W 소재지-2
AHRI Standard 340/360:2015 Performance rating of Commercial and Industrial Unitary Air -conditioning and Heat pump equipment (1 160 ~ 87 000) W 소재지-2
AHRI 1230:2010 Performance rating of Variable Refrigerant Flow(VRF) Multi-Split Air-conditioning and Heatpump equipment (1 160 ~ 87 000) W 소재지-2
AHRI 1300:2013 Standard for performance rating of commercial heatpump water heaters (1 160 ~ 87 000) W 소재지-2
AHRI 1301:2013 Performance Rating of Commercial Heat Pump Water Heaters (1 160 ~ 87 000) W 소재지-2
AHRI Standard 870:2016 Direct Geoexchange Heats pumps (1 160 ∼ 87 000) W 소재지-2
AS/NZS 4234:2008/Amdt2:2011 Heated water systems - calculation of energy consumption (1 160 ~ 87 000) W 소재지-2
AS/NZS 4234:2008/Amdt3:2014 Heated Water systems - calculation of energy consumption (1 160 ~ 87 000) W 소재지-2
AS/NZS 4692.1:2005(R2016)/Amdt2:2015  Electric water heaters - energy consumption, performance and general requirements (1 160 ~ 87 000) W 소재지-2
UAE.S 5010-1:2016 Labeling-Energy efficiency label for electrical appliances Part : 1 : household air conditioners (1 160 ~ 87 000) W 소재지-2
기후에너지환경부 고시 제2026-137호(2026.05.28) 효율관리기자재 운용규정
별표1의 1 전기냉장고
별표1의 3 김치냉장고
별표1의 4 전기냉방기
별표1의 21 전기냉난방기
별표1의 27 전기온풍기
별표1의 28 전기스토브
별표1의 30 제습기
별표1의 46 이동식에어컨		 내용적:1 000 L 이하
내용적: 1 000 L 이하
정격소비전력: 7.5 kW 이하
정격소비전력: 30 kW 이하
정격소비전력: 500 W 이상 ~ 10 kW 이하
정격소비전력: (500 ~ 10 000) W
정격냉방용량: 1 kW 이상 ~ 70 kW 미만
정격소비전력: 1 000 W 이하
정격냉방능력: (500 ~ 23 000) W		 소재지-2
기후에너지환경부 고시 제2026-137호(2026.05.27) 효율관리기자재 운용규정
별표1의 18 삼상유도전동기		 0.75 kW 이상 ~ 375 kW 이하 소재지-2
AS/NZS 3823.2:2013 Performance of electrical appliances - Air conditioners and heat pumps Energy labelling and minimum energy performance standards (MEPS) requirements (1 160 ~ 87 000) W 소재지-2
SASO 2664:2013 Energy Performance and Capacity of Household Refrigerators, Refrigerators-Freezers, and Freezers 1 100 L 이하 소재지-2
기후에너지환경부 고시 제2026-4호(2026.1.12) 고효율에너지 기자재 보급 촉진에 관한 규정
 별표 1의 5. 인버터		 220 kW 이하 소재지-2
산업통상자원부 고시 제2021-166호(2021.10.25) 고효율에너지 기자재 보급 촉진에 관한 규정
 별표 1의 10. 항온항습기
 별표 1의 11. 가스히트펌프		 6 kW 이상 ~ 35 kW 이하
23 kW 이상		 소재지-2
기후에너지환경부 고시 제2026-4호(2026.1.12) 고효율에너지 기자재 보급 촉진에 관한 규정
 별표 1의 12. 전력저장장치(ESS)		 정격 출력(kW)으로 연속하여 부하에 공급할 수 있는 시간은 2 시간 이상인 것 소재지-2
SASO 2763:2008 Safety and performance requirements for window air-conditioners and their method of test (1 160 ~ 20 000) W 소재지-2
SASO 2682:2013 Ducted air-conditioners and air-to-air heat pumps-testing and rating for performance (1 160 ~ 87 000) W 소재지-2
SASO 2681:2013 Non-ducted air conditioners and heat pumps- testing and rating performance (1 160 ~ 87 000) W 소재지-2
GB/T 23137-2008 Heatpump Water Heater for Household and Similar Uses (1 160 ~ 87 000) W 소재지-2
GB/T 21362-2008 Heatpump Water Heater for Commercial & Industrial and Similar Uses (1 160 ~ 87 000) W 소재지-2
NOM-011-ENER-2025 Energy efficiency of central. package or split type air conditioners. limited, test methods and labeling (1 160 ∼ 87 000) W 소재지-2
NOM-021-ENER-SCFI-2017 Energy efficiency and user safety requirements for room air conditioners limts, test methods and labelling (1 160 ∼ 87 000) W 소재지-2
NOM-023-ENER-2018 Energy efficiency for separated assmbilies, free delivery and non-ducted air conditioners. limits, test methods and labelling (1 160 ∼ 87 000) W 소재지-2
NOM-026-ENER-2015 Energy efficiency in split type (Inverter) air conditioners  with variable refrigerant flow, free download and without air ducts. limits, test methods and labelling (1 160 ∼ 87 000) W 소재지-2
▶ 금속 및 관련제품
ASTM E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials (0 ~ 200) kN 소재지-2
▶ 에너지효율
NTE INEN 2206:2011 Household refrigerating appliances with or without frosting. Refrigerators with or without low Temperature compartment. Inspection Requirements 10 kW 이하 소재지-2
NTE INEN 2495:2012 Energy efficiency of non-ducted air conditioners. Requirements (1 160 ~ 87 000) W 소재지-2
RTE INEN 035:2009 Energy efficiency in refrigeration appliances for household use. Report power consumption, test methods and labeling 10 kW 이하 소재지-2
RTE INEN 072(2R):2024 Energy efficiency for ductless air conditioners (1 160 ~ 87 000) W 소재지-2
SANS 54511-3:2016 (Ed 2.00) Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space Heating and cooling Part 3 : Test methods (1 160 ~ 87 000) W 소재지-2
SASO 2663:2014 Energy labelling and minimum energy performance requirements for air-conditioners (1 160 ~ 87 000) W 소재지-2
EN 26:2015 Electric instantaneous water heaters. General requirements (1 160 ∼ 87 000) W 소재지-2
▶ 금속 및 관련제품
ASTM E606/E606M-21 Standard Test Method for Strain-Controlled Fatigue Testing

8.1.2 Elevated temperature		 (0 ~ 250) kN 소재지-2
ASTM E8/E8M-24 Standard Test Methods for Tension Testing of Metallic Materials (0 ~ 200) kN 소재지-2
ASTM E647-24 Standard Test Method for Measurement of Fatigue Crack Growth Rates

10.1.7 chemical composition, pH (for liquids), and pressure (for gases
and vacuum).
ANNEXES A4. SPECIAL REQUIREMENTS FOR TESTING IN AQUEOUS ENVIRONMENTS
ANNEXES A6.3.6 AC Current Method		 (0 ~ 100) kN
(-70 ~ 150) ℃		 소재지-2
▶ 기타재료 및 제품
IEC 62321-4:2013+AMD1:2017 Determination of certain substances in electrotechnical products - Part 4 : Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS Hg : 0.5 mg/kg or more 소재지-2
IEC 62321-3-1:2013 Determination of certain substances in electrotechnical products
- Part 3-1 : Screening - Lead mercury cadmium total chromium and total bromine by X-ray fluorescence spectrometry		 Qualitative method 소재지-2
IEC 62321-5:2013 Determination of certain substances in electrotechnical products
- Part 5 : Cadmium lead and chromium in polymers and electronics and cadmium and lead in metals by AAS AFS ICP-OES and ICP-MS		 Pb : 6.0 mg/kg or more
Cd : 7.0 mg/kg or more
Cr : 5.0 mg/kg or more		 소재지-2
IEC 62321-3-2:2020 Determination of certain substances in electrotechnical products
- Part 3-2 : Screening - Fluorine, chlirune and bromine in polymers and electronics by combustion-ion chromatography (C-IC)		 Br : 30 mg/kg or more 소재지-2
IEC 62321-2:2021 Determination of certain substances in electrotechnical products
- Part 2 : Disassembly disjointment and mechanical sample preparation		 - 소재지-2
IEC 62321-1:2013 Determination of certain substances in electrotechnical products
- Part 1 : Introduction and overview		 - 소재지-2
▶ 에너지효율
AS/NZS 3823.1.4:2012 Performance of electrical appliances - Air conditioners and heat pumps Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance (ISO 15042 : 2011, MOD) (1 160 ~ 87 000) W 소재지-2
KS C IEC 60034-2-1:2014 회전기기 - 제2-1부: 손실 및 효율을 측정하는 표준 시험방법(견인용 모터 제외) 단상: 400 V 이하
삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
KS C IEC 60034-1:2017 회전기기 - 제 1부: 정격 및 성능 단상: 400 V 이하
삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
KS C 9317:2013 전기 제습기
6.1 냉매누출
6.2 제습능력
6.3 소비전력
6.4 온도
6.5 과부하 성능
6.6 절연저항
6.7 내전압
6.8 저온성능
6.9 제습수 처리
6.10 넘치는 물의 절연 성능		 500 W 이하 소재지-2
KS C 9306:2017 에어컨디셔너 (1 160 ~ 35 000) W 소재지-2
KS C 9304:2020 환풍기 3 600 m3/h 이하 소재지-2
▶ 기타재료 및 제품
IEC 62321-6:2015 Determination of certain substances in electrotechnical products
- Part 6 : Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatography-mass spectrometry (GC-MS)		 PBBs : each 5 mg/kg or more
Deca-BB : 16 mg/kg or more

PBDEs : each 5 mg/kg or more
Deca-BDE : 20 mg/kg or more		 소재지-2
IEC 62321-7-1:2015 Determination of certain substances in electrotechnical products
- Part 7-1 : Hexavalent chromium-Presence of hexavalent chromium (Cr(VI)) in colourless and coloured corrosion-protected coatings on metals by the colorimetric method		 Cr(VI) : 0.10 μg/cm² or more 소재지-2
IEC 62321-7-2:2017 Determination of certain substances in electrotechnical products
- Part 7-2 : Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetric method		 Cr(VI) : 8 mg/kg or more 소재지-2
IEC 62321-8:2017 Determination of certain substances in electrotechnical products
- Part 8 : Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory(Py/TD-GC-MS)		 each 50 mg/kg or more 소재지-2
▶ 수질
환경부 고시 제2025-165호 (2025.10.01.) 수도용 자재 및 제품의 위생안전기준 공정시험방법

6. 과망간산칼륨 소비량
7. 냄새
8. 맛
9. 색도
10. 증발잔류물
11. 탁도
12. 음이온 계면활성제
13. 잔류염소 감량
14. 불소
15. 페놀류
16. 시안
17. 질산성 질소 및 아질산성 질소
18. 염소이온
22-2. 금속류 - 유도결합플라스마 원자발광분광법
22-3. 금속류 - 유도결합플라스마 질량분석법
28. 수은
32. 6가 크로뮴
33. 니켈
35. 휘발성유기화합물-퍼지․트랩/기체크로마토그래피/질량분석법
52. 아민류
53. 2,4-톨루엔디아민
54. 2,6-톨루엔디아민
55. 포름알데히드		 - 6 : 0.3 mg/L 이상
- 7 : 이상 유, 무
- 8 : 이상 유, 무
- 9 : 0.1 도 이상
- 10 : (2.0 ~ 2 000) mg/L
- 11 : (0.2 ~ 400) NTU
- 12 : (0.01 ~ 1.0) mg/L
- 13 : -
- 14 : 0.02 mg/L 이상
- 15 : (0.2 ~ 0.8) µg/L
- 16 : (1 ~ 100) µg/L
- 17 :
질산성 질소 : 0.02 mg/L 이상
아질산성 질소 : 0.1 mg/L 이상
- 18 : 0.4 mg/L 이상
- 22-2 :
구리 : 0.003 mg/L 이상
망간 : 0.001 mg/L 이상
아연 : 0.001 mg/L 이상
철 : 0.003 mg/L 이상
나트륨 : 0.03 mg/L 이상
- 22-3 :
납 : 0.000 37 mg/L 이상
비소: 0.000 29 mg/L 이상
셀레늄: 0.000 49 mg/L 이상
카드뮴: 0.000 36 mg/L 이상
- 28 : 0.000 01 mg/L 이상
- 32 : 0.000 3 mg/L 이상
- 33 : 0.000 7 mg/L 이상
- 35 :
디클로로메탄: 0.001 mg/L 이상
1,1-디클로로에틸렌: 0.001 mg/L 이상
트리클로로에틸렌: 0.001 mg/L 이상
1,1,1-트리클로로에탄: 0.001 mg/L 이상
테트라클로로에틸렌: 0.000 4 mg/L 이상
벤젠 : 0.000 4 mg/L 이상
시스-12-디크로로에틸렌: 0.000 3 mg/L 이상
1,1,2-트리클로로에탄: 0.000 4 mg/L 이상
1,2-디클로로에탄 : 0.000 3 mg/L 이상
에피클로로히드린 : 0.000 4 mg/L 이상
아세트산 비닐 : 0.003 3 mg/L 이상
스티렌 : 0.000 5 mg/L 이상
1,2-부타디엔 : 0.001 mg/L 이상
1,3-부타디엔 : 0.7 µg/L 이상
N,N-디메틸아닐린: 0.001 2 mg/L 이상
사염화탄소: 0.2 µg/L 이상
- 52 : (0.01 ~ 0.25) mg/L
- 53 : 0.001 mg/L 이상
- 54 : 0.9 µg/L 이상
- 55 : 0.006 2 mg/L이상		 소재지-2
KS I ISO 10304-1:2007 수질-이온 크로마토그래피를 이용한 용존 음이온의 측정-제1부: 브롬이온, 염소이온, 불소이온, 질산 이온, 아질산 이온, 인산이온, 황산이온의 측정 염소 이온 : 0.1 mg/L
불소 이온 : 0.1 mg/L
질산 이온 : 0.1 mg/L
아질산 이온 : 0.05 mg/L		 소재지-2
▶ 에너지효율
KS C 8571:2015 소형 풍력터빈용 인버터 30 kW 이하
(DC 1 000 V, AC 500 V)		 소재지-2
KS C 8567:2024 태양광발전 접속함 직류 1 500 V 이하 소재지-2
ISO 16494:2014 Heat recovery ventilators and energy recovery ventilators -Method of test for performance 5 000 Nm³/h or less 소재지-2
ISO 16358-3:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part3 : Annual performance factor (1 160 ~ 87 000) W 소재지-2
ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part2 : Heating seasonal performance factor (1 160 ~ 87 000) W 소재지-2
ISO 16358-1:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part1 : Cooling seasonal performance factor (1 160 ~ 87 000) W 소재지-2
ISO 15042:2017 Multiple split-system air-conditioners and air-to-air heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
ISO 15042:2011 Multiple split-system air-conditioners and air-to-air heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
ISO 13256-2:1998 Water-source heat pumps - Testing and rating for performance - Part 2 : Water-to-water and brine-to-water heat pumps (1 160 ~ 87 000) W 소재지-2
ISO 13256-1:1998 Water-source heat pumps - Testing and rating for performance - Part 1 : Water-to-air and brine-to-air heat pumps (1 160 ~ 87 000) W 소재지-2
ISO 13253:2017 Ducted air conditioners and heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
IEC 62301 Ed. 2.0:2011 Household Electrical Appliances - Measurement of Standby Power 100 W or less 소재지-2
KS C IEC 62552:2014 가정용 냉장기기 - 특성 및 시험방법 10 kW 이하 소재지-2
IEC 60034-1:2026 Rotating electrical machines - Part 1: Rating and performance single phase: 400 V or less
three phase: 600 V or less
Power: 375 kW or less		 소재지-2
IEC 60034-2-1:2014 Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) single phase: 400 V or less
three phase: 600 V or less
Power: 375 kW or less		 소재지-2
IEC 60034-30-1:2025 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) single phase: 400 V or less
three phase: 600 V or less
Power: 375 kW or less		 소재지-2
ISO 5151:2010 Non-ducted air conditioners and heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
ISO 5151:2017 Non-ducted air conditioners and heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
KS C 8565:2024 태양광발전용 인버터(계통연계형, 독립형) 1 kW 초과 500 kW 이하
(DC 1 500 V 이하, AC 500 V 이하)		 소재지-2
KS C 8562:2015 박막 태양광발전 모듈(성능) 10 A / 120 V 이하
20 A / 60 V 이하
5 A / 150 V 이하
2.5 A / 300 V 이하		 소재지-2
KS C 8561:2024 결정질 실리콘 태양광발전모듈(성능) 10 A / 120 V 이하
20 A / 60 V 이하
5 A / 150 V 이하
2.5 A / 300 V 이하		 소재지-2
KS B ISO 15042:2017 멀티 에어컨디셔너 및 히트펌프의 성능 시험 방법 (1 160 ~ 87 000) W 소재지-2
KS B 8294:2023 물 - 공기 지열원 멀티형 열펌프 유닛 (1 160 ∼ 87 000) W 소재지-2
KS B 8293:2023 물 - 공기 지열원 열펌프 유닛 (1 160 ∼ 87 000) W 소재지-2
KS B 8292:2023 물 - 물 지열원 열펌프 유닛 (1 160 ∼ 30 000) W 소재지-2
KS B 8053:2015 가스 히트펌프-덕트형 냉·난방기기-정격성능 및 운전성능시험 (1 160 ~ 87 000) W 소재지-2
KS B 8052:2011 가스 히트펌프-비덕트형 냉·난방기기-정격성능 및 운전성능시험 (1 160 ~ 87 000) W 소재지-2
KS B 6377:2009 팬 코일 유닛 (1 160 ∼ 30 000) W 소재지-2
KS B 6311:2022 송풍기의 시험 방법 3 600 m²/h 이하 소재지-2
KS B 6275:2018 워터 칠링 유닛 (1 160 ∼ 87 000) W 소재지-2
KS 2464-2:2013 Performance of household electrical appliances-Refrigerating appliances Part 2: Minimum energy performances standard requirements 10 kW 이하 소재지-2
KS 2464-1:2013 Performance of household electrical appliances-Refrigeration appliances Part 1: Energy consumption and performance 10 kW 이하 소재지-2
KS 2463:2013 Non - ducted air conditioners - Testing and rating performance (1 160 ∼ 87 000) W 소재지-2
KS 2449-1:2013 Rotating electrical machines - General requirements
Part 1: Three-phase cage induction motors - Minimum energy performance standards (MEPS)		 삼상 : 600 V 이하
용량 : 185 kW 이하		 소재지-2
KS C IEC 61215:2005 지상 설치용 결정계 실리콘 태양전지(PV) 모듈－설계 적격성 확인 및 형식 승인 요구 사항 10 A / 120 V 이하
20 A / 60 V 이하
5 A / 150 V 이하
2.5 A / 300 V 이하		 소재지-2
KS C IEC 61646:2008 지상용 박막 태양광 모듈의 설계 요건과 형식 인증 10 A / 120 V 이하
20 A / 60 V 이하
5 A / 150 V 이하
2.5 A / 300 V 이하		 소재지-2
AS/NZS 3823.1.3.:2005/Amdt1:2011 Performance of electrical appliances - Air conditioners and heat pumps Water-source heat pumps - Water-to-air and brine-to-air heat pumps - Testing and rating of performance (ISO 13256-1, Ed. 01 (1998) MOD) (1 160 ~ 87 000) W 소재지-2
ISO 13253:2017/Amd 1:2020 Ducted air conditioners and heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
ES : 3795-1/2016 Energy Efficiency Label requirements for Air Conditions
Part 1 :
Room Air Conditioner window -Split) with fixed Capacity &fixed Compressor		 (1 160 ∼ 87 000) W 소재지-2
ES : 3795-2/2017 Requirements of energy efficiency card for air conditioners second pard : Room Air conditioner(window -split) with variable capacity and variable speed compressor (1 160 ∼ 87 000) W 소재지-2
ES : 3795-5/2018 Energy Efficiency Label Requirements for Air Conditioner - Part 5: Fixed Capacity Ducted Room Air Conditioner with Fixed Speed Compressor (1 160 ∼ 87 000) W 소재지-2
Jordanian Technical Regulation 2107:2013 Technical Regulation on eco-design
requirements for Air Conditioners and Comfort Fans		 (1 160 ∼ 87 000) W 소재지-2
IEC 60904-1-1:2017 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices voltage : 40 V or less
current : 10 A or less		 소재지-2
Jordanian Technical Regulation 2108:2013 Energy efficiency labeling of air conditioners (1 160 ~ 87 000) W 소재지-2
RTCA 23.01.78:20 /2021 E L E C T R I C A L
PRODUCTS. INVERTER
SPLIT TYPE AIR
CONDITIONERS, WITH
V A R I A B L E
REFRIGERANT FLOW,
FREE DISCHARGE AND
WITHOUT AIR DUCTS.
ENERGY EFFICIENCY
SPECIFICATIONS.		 (1 160 ~ 87 000) W 소재지-2
KS B 6879:2020 열회수형 환기 장치 3 000 m³/h 이하 소재지-2
ISO 5151:2017/Amd 1:2020 Non-ducted air conditioners and heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
ISO 16358-1:2013/Amd 1:2019 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part1 : Cooling seasonal performance factor (1 160 ~ 87 000) W 소재지-2
ISO 15042:2017/Amd.1:2020 Multiple split-system air-conditioners and air-to-air heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
EN 14511-3:2022 Air conditioners, liquid chilling packages and heat pumps for
space heating and cooling and process chillers,with electrically
driven compressors- Part 3 : Test methods		 (1 160 ~ 87 000) W 소재지-2
EN 14511-1:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers,with electrically driven compressors- Part 1 : Terms and definitions (1 160 ~ 87 000) W 소재지-2
ES 4814:2018 Non-ducted air conditioners and heat pumps - Testing and rating for performance (1 160 ~ 87 000) W 소재지-2
EN 14511-2:2022 Air conditioners, liquid chilling packages
and heat pumps for space heating and
cooling and process chillers,with electrically
driven compressors- Part 2 : Test conditions		 (1 160 ~ 87 000) W 소재지-2
EN 14511-4:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers,with electrically driven compressors- Part 4 : Requirements (1 160 ~ 87 000) W 소재지-2
IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics voltage : 40 V or less
current : 10 A or less		 소재지-2
▶ 환경 및 신뢰성
ISO 4892-2:2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps Irradiation(Artificial weathering)
: (300 ~ 400) nm
(60 ± 2) W/㎡
: 340 nm
(0.51 ± 0.02) W(/㎡·nm)
Irradiation(Window glass filters)
: (300 ~ 400) nm
(50 ± 2) W/㎡
: 340 nm
(1.10 ± 0.02) W(/㎡·nm)
BPT : (40 ~ 110) ℃
BST : (40 ~ 120) ℃
Humidity : (10 ~ 75) % RH		 소재지-2
KS M ISO 4892-2:2013 플라스틱 - 실험실 광원에 의한 노출 시험방법 - 제2부: 제논-아크 램프 복사량(태양광)
: (300 ~ 400) nm
(60 ± 2) W/㎡
: 340 nm
(0.51 ± 0.02) W(/㎡·nm)
복사량(창유리)
: (300 ~ 400) nm
(50 ± 2) W/㎡
: 340 nm
(1.10 ± 0.02) W(/㎡·nm)
BPT : (40 ~ 110) ℃
BST : (40 ~ 120) ℃
습도 : (10 ~ 75) % RH		 소재지-2
MIL-STD-810E:1989 Environmental test methods and engineering guidelines
500.3 Low Pressure(Altitude)
   Procedure I - Storage
   Procedure II - Operation
501.3 High Temperature
502.3 Low Temperature
503.3 Temperature Shock
505.3 Solar Radiation(Sunshine)
507.3 Humidity
509.3 Salt Fog
512.3 Leakage(Immersion)
   Procedure I - Basic leakage
514.4 Vibration
   Procedure I - General vibration
516.4 Shock
   Procedure I - Functional Shock
   Procedure II - Equipment to be packaged
   Procedure III - Fragility
   Procedure IV - Transit drop		 Altitude : 0 km ~ 21 km
Maximum Temperature : 71 ℃
Minimum Temperature : -50 ℃
Temperature : (-75 ~ 180) ℃
Maximum Temperature : 49 ℃
Maximum total solar radiation : 1 120 W/m²
Maximum Temperature : 71 ℃
Humidity : 98 % R.H.
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
Depth of immersion : Up to 1 000 mm
Frequency : 5 Hz ~ 3 kHz
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 200 m/s²
Shock wave : Sawtooth, Trapezoidal
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 200 m/s²
Maximum duration : 20 ms
Fall height : 1.83 m or less		 소재지-2
IEC 61373:2010  Railway applications ― Rolling stock equipment ― Shock and vibration tests Functional random test
Vertical: (0.750 ~ 38.0) m/s²
Transverse: (0.370 ~ 34.0) m/s²
Longitudinal: (0.500 ~ 17.0) m/s²
Simulated long-life test (5-hour test)
Vertical: (4.25 ~ 144) m/s²
Transverse: (2.09 ~ 129) m/s²
Longitudinal: (2.83 ~ 64.3) m/s²
Shock test
Vertical: (30 ~ 1,000) m/s²
Transverse: (30 ~ 1,000) m/s²
Longitudinal: (50 ~ 1,000) m/s²		 소재지-2
KS C IEC 61373:2010 철도 적용 - 철도차량 장치 - 충격 및 진동시험 기능 랜덤 진동 시험
수직방향: (0.750 ~ 38.0) m/s²
좌우방향: (0.370 ~ 34.0) m/s²
전후방향: (0.500 ~ 17.0) m/s²
모의장기수명시험(5시간 시험)
수직방향: (4.25 ~ 144) m/s²
좌우방향: (2.09 ~ 129) m/s²
전후방향: (2.83 ~ 64.3) m/s²
충격시험
수직방향: (30 ~ 1,000) m/s²
좌우방향: (30 ~ 1,000) m/s²
전후방향: (50 ~ 1,000) m/s²		 소재지-2
IEC 61850-3: 2013 Communication networks and systems for power utility automation － Part 3: General requirements
6.9.3 Climatic environmental tests
6.10.1 Vibration response and endurance(sinusoidal)
6.10.2 Shock response, shock withstand and bump		 High Temperature : Max 200 ℃
Low Temperature : Min -65 ℃
Humidity: Max 97 %
Frequency: (10 ~ 150) Hz
Amplitude(z-p): Max 0.075 mm
Acceleration: Max 19.6 m/s²
Acceleration: Max 294 m/s²
Duration: Max 16 ms		 소재지-2
MIL-STD-810D:1983 Environmental test methods and engineering guidelines
500.2 Low Pressure (Altitude)
   Procedure I - Storage
   Procedure II - Operation
501.2 High Temperature
502.2 Low Temperature
503.2 Temperature Shock
505.2 Solar Radiation(Sunshine)
507.2 Humidity
509.2 Salt Fog
512.2 Leakage(Immersion)
   Procedure I - Basic leakage
514.3 Vibration
   Procedure I - General vibration
516.3 Shock
   Procedure I - Functional Shock
   Procedure IV - Transit drop		 Altitude : 0 km ~ 21 km
Maximum Temperature : 71 ℃
Minimum Temperature : -50 ℃
Temperature : (-75 ~ 180) ℃
Maximum Temperature : 49 ℃
Maximum total solar radiation : 1 120 W/m²
Maximum Temperature : 71 ℃
Humidity : 98 % R.H.
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
Depth of immersion : Up to 1 000 mm
Frequency : 5 Hz ~ 3 kHz
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 200 m/s²
Shock wave : Sawtooth, Trapezoidal
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 200 m/s²
Maximum duration : 20 ms
Fall height : 1.83 m or less		 소재지-2
JESD22-A118B.01:2021 Accelerated Moisture Resistance - Unbiased HAST Temperature : (110 ~ 130) ℃
Humidity : (85 ~ 100) % R.H.		 소재지-2
KS C IEC 60068-2-6:2007 환경 시험 － 제2-6부 : 시험 － 시험 Fc : 진동(정현파) 주파수 : 2 Hz ~ 3 kHz
최대진폭(P-P) : 50.8 mm
최대가속도 : 735 m/s²		 소재지-2
KS C IEC 60068-2-64:2019 환경 시험 - 제2-64부: 시험 - 시험 Fh: 광대역 불규칙 진동 시험 및 지침 주파수 : 5 Hz ~ 3 kHz
최대진폭(P-P) : 50.8 mm
최대가속도 : 735 m/s²		 소재지-2
KS C IEC 60068-2-66:1994 환경 시험 - 제2-66부: 안정 상태의 내습성 시험(불포화 증기 압력) 온도 : (110, 120, 130) ℃
습도 : 85 % R.H.		 소재지-2
IEC 60068-2-5:2018 Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering Temperature range : (-40 ~ 150) ℃
Humidity range: (10 ~ 98) % R.H.
Irradiance : (0 ~ 1 090) W/m²		 소재지-2
IEC 60068-2-52:2017 Environmental testing - Part 2-52 : Tests - Test Kb : Salt mist, cyclic (sodium chloride solution) Salt concentration : (5 ± 1) %
Exposure zone : (35 ± 2) ℃
PH : 6.5 ~ 7.2
(1.0 ~ 2.0) ㎖/h		 소재지-2
IEC 60068-2-6:2007 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) Frequency : 2 Hz ~ 3 kHz
Peak amplitude(P-P) : 50.8 mm
Peak acceleration : 735 m/s²		 소재지-2
IEC 60068-2-64:2008+AMD1:2019 Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance Frequency : 5 Hz ~ 3 kHz
Peak amplitude(P-P) : 50.8 mm
Peak acceleration : 735 m/s²		 소재지-2
IEC 60068-2-66:1994 Environmental testing - Part 2 : Test methods - Test Cx : Damp heat, steady state (unsaturated pressurized vapour) Temperature : (110, 120, 130) ℃
Humidity : 85 % R.H.		 소재지-2
IEC 60068-2-67:1995+AMD1:2019 Environmental testing - Part 2-67 : Tests - Test Cy : Damp heat, steady state, accelerated test primarily intended for components Temperature : (10 ~ 90) ℃
Humidity : (20 ~ 98) % R.H.		 소재지-2
IEC 60068-2-78:2025 Environmental testing - Part 2-78 : Tests - Test Cab : Damp heat, steady state Temperature : (10 ~ 90) ℃
Humidity : (20 ~ 98) % R.H.		 소재지-2
IEC 60068-2-80:2005 Environmental testing - Part 2-80 : Tests - Test Fi : Vibration - Mixed mode Frequency : 5 Hz ~ 3 kHz
Peak amplitude(P-P) : 50.8 mm
Peak acceleration : 735 m/s²		 소재지-2
IEC 60255-21-1:1988 Electrical relays － Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment － Section One: Vibration tests (sinusoidal) Frequency: (10 ~ 150) Hz
Amplitude(z-p): Max 0.075 mm
Acceleration: Max 19.6 m/s²		 소재지-2
JESD22-A103E.01:2021 High Temperature Storage Life
Condition A
Condition B
Condition C
Condition D		 Temperature : (30 ~ 200) ℃ 소재지-2
JESD22-A104F.01:2023 Temperature Cycling High Temperature : (60 ~ 180) ℃
Low Temperature : (-75 ~ 0) ℃		 소재지-2
JESD22-A105D:2020 Power and Temperature Cycling Temperature : (-40 ~ 125) ℃ 소재지-2
JESD22-A108G:2022 Temperature, Bias, and Operating Life Temperature : (-40 ~ 160) ℃ 소재지-2
JESD22-A110E.01:2021 Highly Accelerated Temperature and Humidity Stress Test (HAST) Temperature : (110 ~ 130) ℃
Humidity : (85 ~ 100) % R.H.		 소재지-2
KS C IEC 61850-3:2013 변전소 통신 네트워크 및 시스템 － 제3부：일반 요구 사항
6.9.3 내환경시험
6.10.1 진동응답 및 진동내구시험(정현파)
6.10.2 충격응답, 충격내구 및 충돌시험		 고온: 최고 200 ℃
저온: 최저 -65 ℃
상대습도: 최고 97 %
주파수: (10 ~ 150) Hz
진폭(z-p): 최대 0.075 mm
가속도: 최대 19.6 m/s²
가속도: 최대 294 m/s²
지속시간: 최대 16 ms		 소재지-2
JESD22-A119A:2015 Low Temperature Storage Life Temperature : (-40 ~ -65) ℃ 소재지-2
NTE INEN 1173:2013 Metal coatings. Determinations of corrosion resistance. Salt spray testing for neutral Salt concentration : (50 ± 5) g/L
Exposure zone : (35 ± 2) ℃
pH : 6.5 ~ 7.2
(1.5 ± 0.5) ㎖/h		 소재지-2
IEC 60068-2-38:2021 Environmental testing - Part 2-38 : Tests - Test Z/AD : Composite Temperature/humidity cyclic test Temperature range : (-10 ~ 65) ℃
Humidity range: 98 % R.H. or below		 소재지-2
IEC 60068-2-31:2008 Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens Test surface : steel
Fall height : 1.83 m or less		 소재지-2
IEC 60068-2-30:2025 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) Temperature range : (10 ~ 90) ℃
Humidity range: (20 ~ 98) % R.H.		 소재지-2
MIL-STD-810G:2008 Environmental engineering considerations and laboratory tests
500 Low Pressure(Altitude)
   Procedure I - Storage/Air transport
   Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
505 Solar Radiation(Sunshine)
507 Humidity
509 Salt Fog
512 Immersion
  Procedure I - Immersion
514 Vibration
  Procedure I - General vibration
516 Shock
  Procedure I - Functional Shock
  Procedure II - Materiel to be packaged
  Procedure III - Fragility
  Procedure IV - Transit drop
  Procedure V - Crash hazard
  Procedure VI - Bench handling
528 Mechanical Vibrations of Shipboard Materiel
  (Type I - Environmental And Type II- Internally Excited)		 Altitude : 0 km ~ 21 km
-Temperature
Maximum possible temperature : 200 ℃
Minimum possible temperature : -75 ℃
-Sunlight
Temperature : (-40 ~ 150) ℃
Maximum total solar radiation : 1 120 W/m²
Temperature & Humidity : (10 ~ 90) ℃, (20 ~ 98) % R.H.
-Salt water
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
-Flooding
Depth of immersion : Up to 1 000 mm
-Vibration
Frequency: 5 Hz~3 kHz
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 750 m/s²
-Shock
Shock wave : Sawtooth, Trapezoidal
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 750 m/s²
Maximum duration : 20 ms
-Fall
Bottom: Steel plate
Fall Height: Up to 1.83 m		 소재지-2
MIL-STD-810G:(w/Change 1):2014 Environmental engineering considerations and laboratory tests
500.6 Low Pressure(Altitude)
   Procedure I - Storage/Air transport
   Procedure II - Operation/Air carriage
501.6 High Temperature
502.6 Low Temperature
503.6 Temperature Shock
505.6 Solar Radiation(Sunshine)
507.6 Humidity
509.6 Salt Fog
512.6 Immersion
   Procedure I - Immersion
514.7 Vibration
   Procedure I - General vibration
516.7 Shock
   Procedure I - Functional Shock
   Procedure IV - Transit drop
528.1 Mechanical Vibrations of Shipboard Materiel
5.1 Procedure I (Type I) - Environmental Vibration		 Altitude : 0 km ~ 21 km
Maximum Temperature : 71 ℃
Minimum Temperature : -51 ℃
Temperature : (-75 ~ 180) ℃
Maximum Temperature : 49 ℃
Maximum total solar radiation : 1 120 W/m²
Maximum Temperature : 71 ℃
Humidity : 98 % R.H.
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
Depth of immersion : Up to 1 000 mm Frequency : 5 Hz ~ 3 kHz
Maximum acceleration : 200 m/s²
Maximum acceleration : 200 m/s²
Maximum duration : 20 ms
Fall height : 1.83 m or less
(4 ~ 33) Hz		 소재지-2
GMW14872:2013 Cyclic Corrosion Laboratory Test Salt solution : 0.9 % NaCl, 0.1 % CaCl2, 0.075 % NaHCO3
Conditions : Ambient (25 ± 3) ℃, 45 % R.H.
Humid (49 ± 2 ) ℃, ~ 100 % R.H.
Dry (60 ± 2) ℃, ≤30 % R.H.		 소재지-2
IACS UR E10:2024 Test specification for type approval
1. Visual inspection
2. Performance test
5. Dry heat
6. Damp heat
7. Vibration
8. Inclination
11. Cold		 High Temperature : (55 ~ 70) ℃
Low Temperature : ( -25 ~ 5) ℃
Temperature range : (55 ~ 90) ℃
Humidity range : (92 ~ 98) % R.H.
Vibration Waveform : sine
Frequency : (2 ~ 100) Hz
Amplitude(p-p) : 1.6 mm
Acceleration : 40 m/s²
Max tilt angle : 22.5 °		 소재지-2
JESD22-A101D.01:2021 Steady State Temperature Humidity Bias Life Test Temperature : (10 ~ 90) ℃
Humidity : (20 ~ 98) % R.H.		 소재지-2
JESD22-A102E:2015 Accelerated Moisture Resistance-Unbiased Autoclave Temperature : 121 ℃ 소재지-2
IEC 60255-21-3:1993 Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests  4 Requirements for single axis sine sweep seismic test(method A) Frequency : (1 ~ 35) Hz
Acceleration : (0.5 ~ 2.0) gn		 소재지-2
IEC 60255-21-2:1988 Electrical relays － Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment － Section Two: Shock and bump tests Acceleration : Max 294 m/s²
Duration : Max 16 ms		 소재지-2
KS D 9502:2024 염수 분무 시험방법 (중성, 아세트산 및 캐스 분무 시험) 염용액 농도 : (5 ± 1) %
시험조 온도 : (35 ± 2) ℃
PH : 6.5 ~ 7.2
분무량 : (1.5 ± 0.5) ㎖/h		 소재지-2
KS R 9144:2021 철도차량 부품의 진동 시험 방법 주파수 : 1 Hz ~ 3 kHz
최대진폭(P-P) : 50.8 mm
최대가속도 : 735 m/s²		 소재지-2
IEC 60068-2-1:2025 Environmental testing - Part 2-1: Tests - Test A: Cold Low Temperature : (-65 ~ 5) ℃ 소재지-2
IEC 60068-2-11:2021 Basic environmental testing procedures Part 2 : Tests Test Ka : Salt mist Salt concentration : (5 ± 1) %
Exposure zone : (35 ± 2) ℃
PH : 6.5 ~ 7.2
(1.0 ~ 2.0) ㎖/h		 소재지-2
IEC 60068-2-13:2021 Environmental testing - Part 2-13 : Tests - Test M : Low air pressure Altitude : 0 km ~ 21 km 소재지-2
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature High Temperature : (60 ~ 175) ℃
Low Temperature : (-65 ~ 0) ℃		 소재지-2
IEC 60068-2-18:2017 Environmental testing - Part 2 : Tests Test R and guidance : Water
- Method Ra2 : Drip box
- Method Rb1 : Oscillating tube and spray nozzle
- Method Rc1 : Water tank		 Ra2 : IPX1, IPX2
Rb1 : IPX3, IPX4
Rc1 : 1 000 mm		 소재지-2
IEC 60068-2-2:2025 Environmental testing - Part 2-2: Tests - Test B: Dry heat High Temperature : (30 ~ 300) ℃ 소재지-2
IEC 60068-2-27:2008 Environmental testing. Part 2 : Tests. Test Ea and guidance : Shock Pulse shape : half-sine/trapezoidal pulse
Maximum peak acceleration : 1 500 g Minimum pulse duration : 0.5 ms		 소재지-2
RTCA DO-160G:2010 Environmental Conditions and Test Procedures for Airborne Equipment
Section 4 Temperature and Altitude
4.5.1 Ground Survival Low Temperature Test and Short-Time operating Low Temperature Test
4.5.2 Operating Low Temperature Test
4.5.3 Ground Survival High Temperature Test and Short-Time operating High Temperature Test
4.5.4 Operating High Temperature Test
4.5.5 In-Flight Loss of Cooling Test
4.6.1 Altitude Test
Section 5 Temperature Variation
Section 6 Humidity		 Altitude : 0 km ~ 21 km
Max Temperature : 200 ℃
Min Temperature : -60 ℃
High Temperature : (60 ~ 180) ℃
Low Temperature : (-75 ~ 0) ℃
Temperature: (-40 ~ 150) ℃
Temperature range : (10 ~ 90) ℃
Humidity range : (20 ~ 98) % R.H.		 소재지-2
산업통상자원부 고시 제2018-206호(2018.11.20) 전력량계 기술기준
5.2.1 내충격성
5.2.2 내진동성
8.3.2 내열성
8.3.3 내한성
8.3.4 온습도사이클
8.3.5 태양열복사		 최고가능온도: 200 ℃
최저가능온도: -60 ℃
온도 : (10 ~ 55) ℃
습도 : (20 ~ 98) % R.H.
온도 : (-45 ~ 180) ℃
최대태양광 : 1 120 W/m²
주파수: (10 ~ 150) Hz
진폭: 0.075 mm
가속도: 9.8 m/s²
충격파형 : 반정현파
최대 충격가속도 : 300 m/s²
펄스지속시간 : 18 ms		 소재지-2
KS C IEC 60255-21-3:1993 전기계전기 - 제21-3부: 보호계전기와 보호 기기의 진동, 충격, 충돌, 지진시험 - 지진시험 4 단일 축 사인 스위프 지진 시험의 요구사항(방법 A) 주파수 : (1 ~ 35) Hz
진동폭 : (0.5 ~ 2.0) gn		 소재지-2
KS C IEC 60068-2-1:2007 환경 시험 - 제2-1부 : 시험 - 시험 A : 내한성 시험 최저온도 : (-65 ~ 5) ℃ 소재지-2
KS C IEC 60068-2-13:2021 환경 시험 - 제2-13부: 시험 - 시험 M : 저기압 고도 : 0 km ~ 21 km 소재지-2
KS C IEC 60068-2-14:2009 환경 시험 - 제2-14부 : 시험 - 시험 N : 온도 변화 고온 : (60 ~ 175) ℃
저온 : (-65 ~ 0) ℃		 소재지-2
KS C IEC 60068-2-2:2007 환경 시험 - 제2-2부 : 시험 - 시험 B : 내열성 시험 최고온도 :(30 ~ 300) ℃ 소재지-2
KS C IEC 60068-2-27:2008 환경 시험-제2-27부：시험-시험 Ea와 지침：충격 시험 충격파형 : 반정형 / 구형파
최대충격가속도 : 1 500 g
최소펄스지속시간 : 0.5 ms		 소재지-2
KS C IEC 60068-2-30:2005 환경시험 - 제2-30부: 시험 - 시험 Db와 지침: 주기적 내습 (12 h + 12 h 주기) 온도 : (10 ~ 55) ℃
습도 : (20 ~ 98) % R.H.		 소재지-2
KS C IEC 60068-2-31:2008 환경 시험 - 제2-31부: 시험 - 시험 Ec: 주로 장비형 시편에 사용하는 거친 취급시 충격 바닥면 : 철판
낙하높이 : 1.83 m 이하		 소재지-2
KS C IEC 60068-2-38:2021 환경 시험 - 제2-38부: 시험 - 시험 Z/AD: 복합 온도/습도 사이클 시험 온도 : (-10 ~ 65) ℃
습도 : 98 % R.H. 이하		 소재지-2
KS C IEC 60068-2-5:2018 환경시험 - 제2-5부: 시험 - 시험 S: 지표면에서의 모의 태양광 시험과 태양 방사 지침 및 내후성 지침 온도 : (-40 ~ 150) ℃
습도 : (10 ~ 98) % R.H.
복사량 : (0 ~ 1 090) W/m²		 소재지-2
KS C IEC 60068-2-52:2017 환경시험 - 제2-52부 : 시험 - 시험 Kb : 염수분무, 사이클(염화소듐 용액) 염용액 농도 : (5 ± 1) %
시험조 온도 : (35 ± 2) ℃
PH : 6.5 ~ 7.2		 소재지-2
KS C IEC 60255-21-2:1988 전기 계전기 － 제21-2부: 보호 계전기와 보호 기기의 진동, 충격, 충돌, 지진 시험 － 지진 시험 가속도: 최대 294 m/s²
지속시간: 최대 16 ms		 소재지-2
KS C IEC 60255-21-1:1988 전기계전기 제21-1부 : 측정용 계전기와 보호기기의 진동, 충격, 지진시험-제1절: 진동시험(정현파) 주파수: (10 ~ 150) Hz
진폭(z-p): 최대 0.075 mm
가속도: 최대 19.6 m/s²		 소재지-2
KS C IEC 60068-2-80:2005 환경 시험－제2-80부 : 시험－시험 Fi : 진동－혼합 모드 주파수 : 5 Hz ~ 3 kHz
최대진폭(P-P) : 50.8 mm
최대가속도 : 735 m/s²		 소재지-2
KS C IEC 60068-2-78:2012 환경 시험－제2-78부 : 시험－시험 Cab : 안정상태의 내습성 시험 온도 : (10 ~ 90) ℃
습도 : (20 ~ 98) % R.H.		 소재지-2
KS C IEC 60068-2-67:2019 환경 시험 — 제2-67부: 안정 상태의 내습성 시험, 부품의 가속 시험에 적용 온도 : (10 ~ 90) ℃
습도 : (20 ~ 98) % R.H.		 소재지-2
MIL-STD-810F:2000 Environmental engineering considerations and laboratory tests
500.4 Low Pressure(Altitude)
  Procedure I - Storage/Air transport
  Procedure II - Operation/Air carriage
501.4 High Temperature
502.4 Low Temperature
503.4 Temperature Shock
505.4 Solar Radiation(Sunshine)
507.4 Humidity
509.4 Salt Fog
512.4 Immersion
   Procedure I - Immersion
514.5 Vibration
   Procedure I - General vibration
516.5 Shock
   Procedure I - Functional Shock
   Procedure IV - Transit drop 		 Altitude : 0 km ~ 21 km
Maximum Temperature : 71 ℃
Minimum Temperature : -50 ℃
Temperature : (-75 ~ 180) ℃
Maximum Temperature : 49 ℃
Maximum total solar radiation : 1 120 W/m²
Maximum Temperature : 71 ℃
Humidity : 98 % R.H.
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
Depth of immersion : Up to 1 000 mm
Frequency : 5 Hz ~ 3 kHz
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 200 m/s²
Shock wave : Sawtooth, Trapezoidal
Maximum amplitude(p-p) : 50.8 mm
Maximum acceleration : 200 m/s²
Maximum duration : 20 ms
Fall height : 1.83 m or less		 소재지-2
▶ 화재
KS F ISO 5660-1:2015 연소성능시험 - 열방출률, 연기발생률, 질량감소율 - 제1부:열방출률(콘칼로리미터법) 및 연기발생률(동적측정) 방출열량 : (0.1 ~ 100) MJ/m²,
열방출률 : (1 ~ 1 000) kW/m²		 소재지-2
국토교통부고시 제2025-508호(2025.09.19.) 건축자재등 품질인정 및 관리기준
제6장 건축물 마감재료의 성능기준 및 화재 확산 방지구조
제23조(불연재료의 성능기준)
제24조(준불연재료의 성능기준)
제25조(난연재료의 성능기준)		 정지시간 : (1 ~ 15) min
온도 : (50 ~ 900) ℃
질량감소율 : (0 ~ 100) %
방출열량 : (0.1 ~ 100) MJ/m²
열방출률 : (1~1 000) kW/m²		 소재지-2
KS F 2271:2021 건축물 마감재료의 가스유해성 시험방법 정지시간 : (1 ~ 15) min 소재지-2
▶ 진동특성
한국전력공사 DS-0050(2021.04.14.) 송배전설비 내진설계기준
- 송배전설비 내진설계 실무지침서(2021.05) (2.7 설비의 내진검증시험)		 Frequency Range : (1 ~ 50) Hz 소재지-2
Telcordia GR-63-CORE Issue5:2017 NEBS Requirements: Physical Protection
4.4.1 Earthquake Environment and Criteria
5.4.1 Earthquake Test Methods
(제외: 5.4.1.4 Static Test Procedure)		 Earthquake Level : Zone 4, Zone 3, Zone 1 and 2
Frequency Range : (1 ~ 50) Hz		 소재지-2
ICC-ES AC156:2010 Acceptance Criteria for Seismic Certification by Shake-table Testing of Nonstructural Components Frequency Range : (1 ~ 50) Hz 소재지-2
IEC 60255-21-3:1993 Electrical relays - Part 21 : Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3 : Seismic tests. Frequency : (1 ~ 35) Hz
Sweep Rate : 1 octave/min		 소재지-2
국립전파연구원 공고 제2022-7호(2022.02.15.) 방송통신설비의 내진시험방법
<제외항목>
제14조 해석적용조건
제16조 해석결과보고서
제18조 해석결과 판정조건
별표2 내진해석결과요약서		 Frequency : (1 ~ 50) Hz
TRS analysis : 1/6 octave Bandwidth Analysis		 소재지-2
IEEE Std 693:2018 IEEE Recommended Practice for Seismic Design of Substations
 - 5. Seismic criteria for qualification of electrical substation equipment		 Frequency : (1 ~ 50) Hz 소재지-2
IEEE Std 382:2006 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
 - 5. Identification of the generic actuator group
 - 6. Qualification testing of selected actuators in generic actuator group		 Frequency : (1 ~ 50) Hz
Sine Beat : (12 ~ 15) oscillations per beat		 소재지-2
IEEE Std 344:2013 IEEE Standard for Seismic Qualification of Equipment for Nuclear Power Generating Stations
 - 8. Testing
 - 8.1 Introduction
 - 8.2 Proof and generic testing
 - 8.4 Device testing
 - 8.5 Assembly testing
 - 8.6 Test methods
 - 8.6.1 Introduction
 - 8.6.2 Single-frequency test
 - 8.6.3 Multiple-frequency tests
 - 8.6.3.1 Derivation of test input motion
 - 8.6.3.2 Time history test
 - 8.6.3.3 Random-motion test
 - 8.6.6 Multiaxis tests		 Frequency : (1 ~ 50) Hz
TRS analysis : 1/6 octave Bandwidth Analysis		 소재지-2
KS C IEC 60068-3-3:2020 환경 시험 - 제3-3부: 기기의 내진 시험 방법의 지침
 - 13.2 다중 진동수파 시험
 - 13.3 단일 진동수 시험		 Frequency : (1 ~ 50) Hz 소재지-2
IEEE C37.98:2013 IEEE Standard for Seismic Qualification Testing of Protective Relays and Auxilaries for Facilities Frequency : (1 ~ 100) Hz 소재지-2
IEC 61587-2:2011 Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2 : Seismic tests for cabinets and racks Frequency : (1 ~ 50) Hz
Max. Deflection : ≥ 40 mm
Damping : 2 %		 소재지-2
KS C IEC 60255-21-3:2012 전기계전기－제21-3부：보호계전기와 보호 기기의 진동, 충격, 충돌, 지진시험－지진시험 Frequency : (1 ~ 35) Hz
Sweep Rate : 1 octave/min		 소재지-2
▶ 에너지효율
EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space Heating and cooling. Terms, definitions and classification (1 160 ~ 87 000) W 소재지-2
EN 14511-2:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space Heating and cooling. Test conditions (1 160 ~ 87 000) W 소재지-2
EN 14511-3:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space Heating and cooling. Test methods (1 160 ~ 87 000) W 소재지-2
EN 14511-4:2018 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space Heating and cooling. Operating requirements, marking and instructions (1 160 ~ 87 000) W 소재지-2
EN 14825:2018 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space Heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance (1 160 ~ 87 000) W 소재지-2
EN 16147:2017 Heat pumps with electrically driven compressors - Testing, performance rating and requirements for marking of domestic hot water units (1 160 ~ 87 000) W 소재지-2
EN 15218:2013 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements (1 160 ~ 87 000) W 소재지-2
AS/NZS 4474.2:2009/Amdt2:2014 Performance of household electrical appliances - Refrigerating appliances Energy labelling and minimum energy performance standard requirements 10 kW or less 소재지-2
DGNTI-COPANIT509:2017 Energy efficiency in split-type air conditioners with variable refrigerant flow, free discharge and without air ducts. Limits, test methods. (1 160 ∼ 87 000) W 소재지-2
DGNTI-COPANIT511:2017 Energy efficiency of refrigerator and freezer appliances. Limits, test methods. 10 kW 이하 소재지-2
NOM-015-ENER-2012 Energy efficiency of refrigerator and freezer appliances. limits, test methods and labeling 10 kW 이하 소재지-2
IEC 62552:2007 Household refrigerating appliances - Characteristics and test methods 10 kW or less 소재지-2
IEC 62552-1:2015 Household Refrigerating Appliances - Characteristics And Test Methods Part 1 : General Requirements 10 kW or less 소재지-2
IEC 62552-2:2015 Household Refrigerating Appliances - Characteristics And Test Methods Part 2 : Performance requirements 10 kW or less 소재지-2
IEC 62552-3:2015 Household Refrigerating Appliances - Characteristics And Test Methods Part 3 : Energy consumption and volume 10 kW or less 소재지-2
EN 14825:2022 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space Heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance (1 160 ~ 87 000) W 소재지-2
▶ 화재
KS F ISO 1182:2020 화재연소 시험방법 - 불연성시험 온도 : (50 ~ 900) ℃
질량감소율 : (0 ~ 100) %		 소재지-2
▶ 전기재료 및 부품
KS C IEC 61960-3:2017 알칼리 또는 기타 비산성 전해질을 포함하는 이차전지 셀 및 전지 - 휴대기기용 리튬 이차전지 셀 및 전지- 제3부: 각형 및 원통형 리튬 이차전지 셀 및 이로 구성된 전지 Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ∼ 160) ℃		 소재지-3
KS C IEC 62619:2022 알칼리 또는 비산성 전해질을 포함하는이차전지 셀 및 전지- 산업용 리튬 이차전지 셀 및 전지의 안전 요구사항 Max. Voltage : DC 1 500 V
Max. Current : DC 1 200 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
KS C IEC 62620:2023 알칼리 또는 기타 비산성 전해질을 포함하는 리튬 이차전지 셀 및 전지 - 산업용으로 사용되는 리튬 이차전지 셀 및 전지 Max. Voltage : DC 1 500 V
Max. Current : DC 1 200 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
UN Document The Manual of tests and criteria; Eighth revised edition, section 38.3 : 2025 Max. Voltage : DC 600 V
Max. Current : DC 200 A
Temperature range : (-40 ~ 75) ℃		 소재지-3
SPS-C KBIA-10104-03-7312:2025 에너지저장시스템용 리튬이차전지시스템-성능과 안전 Max. Voltage : DC 1 500 V
Max. Current : DC 1 200 A		 소재지-3
KC 62619:2023 산업용 리튬이차전지 안전 Max. Voltage : DC 1 500 V
Max. Current : DC 1 200 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
IEC 61960-3:2017 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 3: Prismatic and cylindrical lithium secondary cells and batteries made from them Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
IEC 62619:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications Max. Voltage : DC 1 500 V
Max. Current : DC 1 200 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
IEC 62620:2014+AMD1:2023 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for use in industrial applications Max. Voltage : DC 1 500 V
Max. Current : DC 1 200 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
IEC 62660-3:2022 Secondary lithium-ion cells for the propulsion of electric road vehicles - Part 3: Safety requirements Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ~ 160) ℃		 소재지-3
SPS-C KBIA-10100-02-7487:2022 소형 무인동력비행장치용 리튬이차전지-성능시험방법
Secondary lithium batteries for small unmanned aerial vehicle - performance test method		 Max. DC 100 V
Max. DC 50 A
Temperature: (0 ~ 50) ℃		 소재지-3
▶ 가정용 전기기기
KS R IEC 61851-23:2014 전기자동차 전도성 충전 시스템 제23부: 전기자동차 직류 충전 스테이션
101.1.2 물체 유입에 대한 IP 등급		 AC 770 V 이하
DC 2 000 V 이하		 소재지-3
IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements
12.4 IP degrees		 AC 770 V or less
DC 2 000 V or less		 소재지-3
IEC 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electirc vehicle charging station
101.1.2 IP degrees for ingress of objects		 AC 770 V or less
DC 2 000 V or less		 소재지-3
KC 61851-23:2018 전기차 충전시스템 제23부: 직류 충전 장치
12.2 물체 침투에 대한 보호 등급		 AC 770 V 이하
DC 2 000 V 이하		 소재지-3
EN IEC 61851-1:2019 Electric vehicle conductive charging system - Part 1: General requirements
12.4 IP degrees		 AC 770 V 이하
DC 2 000 V 이하		 소재지-3
KS R IEC 61851-1:2017 전기자동차 전도성 충전 시스템 제1부: 일반 요구사항
12.4 IP 등급		 AC 770 V 이하
DC 2 000 V 이하		 소재지-3
KC 61851-1:2022 전기자동차 충전시스템 제1부: 일반 요구사항
12.4 IP 등급		 AC 770 V 이하
DC 2 000 V 이하		 소재지-3
EN IEC 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electirc vehicle charging station
101.1.2 IP degrees for ingress of objects		 AC 770 V 이하
DC 2 000 V 이하		 소재지-3
KS C 8565:2023 태양광 발전용 인버터
(계통연계형, 독립형)
8.3.3. 감전 보호 시험		 2.4 MW 이하 소재지-3
K 62477-1:2011 전력전자 변환기기 및 시스템(PECS) - 제1부 : 일반

5.2.2.3 IP 시험
5.2.5.2 고전류 아크 점화 시험
5.2.5.3 글로와이어
5.2.5.5 가연성 시험
5.2.5.6 화염 오일 시험
5.2.6.4 진동시험
5.2.6.5 염무시험		 전압: AC (0 ~ 765) V,
DC (0 ~ 1 500) V		 소재지-3
KS C IEC 60529:2013 외함의 밀폐 보호등급 구분(IP코드)
<제외항목>
14.2.1 적하 상자를 가진 제 2특성 숫자 1에 관한 시험
14.2.2 적하 상자를 가진 제 2특성 숫자 2에 관한 시험
14.2.3 진동관과 분무 노즐을 가진 제2특성숫자3에 관한 시험 진동관
14.2.4 진동관 또는 분무 노즐을 가진 제 2특성 숫자4에 관한 시험 진동관
14.2.7 제 2 특성 숫자 7에 관한 시험: 0.15 ~ 1 m의 일시적 침수
14.2.8 제 2 특성 숫자 8에 관한 시험: 협의가 필요한 연속 침수
14.2.9 고압 및 고온 물분사 제트에 의한 제 2 특성 숫자 9 시험		 IP1X ~ IP6X
IPX3 ~ IPX6		 소재지-3
IEC 60529:1989+AMD1:1999+AMD2:2013 Degrees of protection provided by enclosures(IP Code)

14.2.1 Test for second characteristic numerals 1 with the drip box
14.2.2 Test for second characteristic numerals 2 with the drip box
14.2.3 Test for second characteristic numeral 3 with oscillationg tubeor spray nozzle: oscillating tube
14.2.4 Test for second characteristic numeral 4 with oscillating tube or spray nozzle: oscillating tube
14.2.7 Test for second characteristic numeral 7: temporary immersion between 0,15 m and 1 m
14.2.8 Test for second characteristic numeral 8: continuous immersion subject to agreement
14.2.9 Test for second characteristic numerals 9 by high pressure and temperature water jetting		 IP1X ~ IP6X
IPX3 ~ IPX6		 소재지-3
KS C IEC 62477-1: 2016 전력전자 컨버터 시스템 및 장비의 안전 요구사항 - 제1부: 일반

5.2.2.3 IP 시험
5.2.5.2 고전류 아크 점화 시험
5.2.5.3 글로와이어
5.2.5.5 가연성 시험
5.2.5.6 화염 오일 시험
5.2.6.4 진동시험
5.2.6.5 염무시험		 전압: AC (0 ~ 765) V,
DC (0 ~ 1 500) V		 소재지-3
▶ 소프트웨어
IEC 61508-1:2010 Functional safety of electrical / electronic / programmable  electronic safety-related systems - Part 1: General requirements - 소재지-4
과학기술정보통신부고시 제2024-41호 (2024.10.29.) 소프트웨어 품질인증 운영에 관한 지침 - 소재지-4
ISO/IEC 25023:2016 Systems and software engineering ― Systems and software Quality Requirements and Evaluation(SQuaRE) ― Measurement of system and software product quality - 소재지-4
ISO/IEC 25051:2014 Software engineering —Systems and software Quality  Requirements and Evaluation(SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing - 소재지-4
IEC 62619:2022 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and  batteries, for use in industrial applications
- 8. Battery system safety
  (considering functional safety)		 - 소재지-4
IEC 62061:2021 Safety of machinery - Functional safety of safety-related control systems - 소재지-4
IEC 61508-3:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements - 소재지-4
IEC 61508-2:2010 Functional safety of electrical / electronic / programmable electronic safety - related systems - Part 2: Requirements for electrical / electronic / programmable electronic safety-related systems - 소재지-4
IEC 60730-1:2022 Automatic electrical controls-Part1:General requirements
- Annex H : Requirements related to functional safety		 - 소재지-4
KS X ISO/IEC 25051:2014 소프트웨어 공학 - 시스템 및 소프트웨어 품질 요구사항 및 평가(SQuaRE) - 즉시 사용 가능한 소프트웨어 제품(RUSP)의 품질 요구사항 및 테스팅 지침 - 소재지-4
EN 81-50:2020 Safety rules for the construction and installation of lifts - Examinations and tests Part 50: Design rules, calculations, examinations and tests of lift components
- 5.6 Type examination of safety circuits containing electronic components and/or programmable electronic systems (PESSRAL)
- Annex B (normative) Programmable electronic systems in safety related applications for lifts (PESSRAL)		 - 소재지-4
KC 62619:2023 산업용 리튬이차전지 안전 Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for secondary Lithium cells and batteries, for use in industrial applications
- 8. 전지시스템 안전(기능 안전성 검토)
- 부속서 E		 - 소재지-4
KS C IEC 61508-1:2010 전기/전자/프로그램 가능한 전자장치 안전관련 시스템의 기능안전성-제1부:일반요구사항 - 소재지-4
KS X ISO/IEC 25023:2016 시스템 및 소프트웨어 공학 - 시스템 및 소프트웨어 품질 요구사항 및 평가(SQuaRE) - 시스템 및 소프트웨어 제품 품질 측정 - 소재지-4
MISRA-C:2004 Guidelines for the use of the C language in critical systems - 소재지-4
행정안전부 고시 제2022-18호(2022.03.02) 승강기안전부품 안전기준 및 승강기 안전기준
제4조제1호 엘리베이터 안전기준 : 별표 22
- 15.2.6 안전 관련 프로그램 적용 가능한 전자시스템(PESSRAL)
- 부속서 Ⅰ 전기안전장치 목록
- 부속서 XⅢ (규정) 엘리베이터의 안전 관련 프로그램 적용 가능한 전자시스템(PESSRAL)		 - 소재지-4
IEC 60335-1:2020+AMD1:2025 Household and similar electrical appliances - Safety - Part 1: General requirements
Annex R Software evaluation		 - 소재지-4
▶ 전자기적합성
ECE R-10.05:2014 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
Annex 4 : Method of measurement of radiated broadband electromagnetic emissions from vehicles
Annex 5 : Method of measurement of radiated narrowband electromagnetic emissions from vehicles
Annex 6 : Method of testing for immunity of vehicles to electromagnetic radiation		 RE : 30 MHz ~ 1 GHz
RI : 80 MHz ~ 2 GHz, 30 V/m		 소재지-5
ISO 10605:2008 Road vehicles - Test methods for electrical disturbances from electrostatic discharge Voltage: ±25 kV 소재지-5
SAE ARP5583A:2010 (R) Guide to Certification of Aircraft in a High-Intensity Radiated Field (HIRF) Environment
6.3 Aircraft High-Level Tests(Step 9)


6.3.4 High Level Direct Drive Test Methodology
6.3.6 High-Level Tests in a Reverberation Chamber		 10 kHz ~ 40 GHz
(Max Peak Level 3 600 V/m, Max Average Level 490 V/m)		 소재지-5
MIL-STD-464C:2010 ELECTROMAGNETIC
ENVIRONMENTAL EFFECTS
REQUIREMENTS FOR SYSTEMS
5.1 Margins
5.2 Intra-system electromagnetic compatibility(EMC)
5.3 External RF EME
5.9 Electromagnetic radiation hazards(EMRADHAZ)
5.11 Electrical bonding
5.12 External grounds		 Margins : 10 kHz ~ 18 GHz
External RF EME : 10 kHz ~ 40 GHz
(Max Peak Level 3 600 V/m, Max Average Level 490 V/m)
EMRADHAZ : 100 kHz ~ 18 GHz
Elecrical bonding: Min 0.01 mΩ
External grounds: Min 0.01 mΩ		 소재지-5
ISO 11451-2:2015 Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy
Part 2: Off-vehicle radiation sources


TLS Test method
7.3.2 Vehicle in charging mode connected to the power grid
7.3.3 Vehicle in charging mode
through wireless power
transmission (WPT)		 0.01 MHz ~ 18 GHz, 100 V/m 소재지-5
CISPR 25 Ed.4.0:2016 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

6 Measurement of components and modules		 0.15 MHz ~ 2.5 GHz 소재지-5
CISPR 12 Ed.6.1:2009 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

5.2.1 Outdoor test site (OTS) requirements		 30 MHz ~ 1 GHz 소재지-5
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test Max. ±15 kV 소재지-5
GSFC-STD-7000A:2013 GENERAL ENVIRONMENTAL VERIFICATION STANDARD (GEVS) For GSFC Flight Programs and Projects
2.5.2.1.1 Conducted Emissions, Power Leads, Differential Mode
2.5.2.1.2 Conducted Emissions, Common Mode, Power and Signal Lines
2.5.2.1.3 Conducted Emissions, Time Domain, Transients
2.5.2.1.4 Conducted Emissions, Antenna Terminal
2.5.2.2.1 Conducted Susceptibility, Power Leads, 30 Hz to 150 kHz
2.5.2.2.2 Conducted Susceptibility, Antenna Terminals
2.5.2.2.3 Conducted Susceptibility, Transients, Power Leads
2.5.2.2.4 Conducted Susceptibility, Bulk Cable Injection, 10 kHz to 200 MHz
2.5.2.2.5 Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
2.5.2.3.1 Radiated Emissions, Magnetic Field
2.5.2.3.2 Radiated Emissions, Electric Field
2.5.2.4.1 Radiated Susceptibility, Magnetic Field
2.5.2.4.2 Radiated Susceptibility, Electric Field		 2.5.2.1.1 30 Hz to 50 MHz

2.5.2.1.2 30 Hz to 200 MHz


2.5.2.1.4 10 kHz to 40 GHz
2.5.2.2.1 30 Hz to 150 kHz

2.5.2.2.2 30 Hz to 20 GHz
2.5.2.2.3 200 V, 150 ns, 10 μs

2.5.2.2.4 10 kHz to 200 MHz

2.5.2.2.5 Impulse 5 A

2.5.2.3.1 30 Hz to 100 kHz
2.5.2.3.2 200 MHz to 18 GHz
2.5.2.4.1 30 Hz to 100 kHz
2.5.2.4.2 2 MHz to 18 GHz		 소재지-5
ECSS-E-ST-20-07C Rev.1:2012 Space engineering - Electromagnetic compatibility
5.4.2 CE, power leads, differential mode, 30 Hz to 100 kHz
5.4.3 CE, power and signal leads, 100 kHz to 100 MHz
5.4.4 CE, power leads, inrush current
5.4.6 RE, electric field, 30 MHz to 18 GHz
5.4.7 CS, power leads, 30 Hz to 100 kHz
5.4.8 CS, bulk cable injection, 50 kHz to 100 MHz
5.4.9 CS, power leads, transients
5.4.10 RS, magnetic field, 30 Hz to 100 kHz
5.4.11 RS, electric field, 30 MHz to 18 GHz
5.4.12 Susceptibility to electrostatic discharges		 5.4.2 30 Hz to 100 kHz

5.4.3 100 kHz to 100 MHz


5.4.6 30 MHz to 18 GHz
5.4.7 30 Hz to 100 kHz
5.4.8 50 kHz to 100 MHz

5.4.10 30 Hz to 100 kHz
5.4.11 30 MHz to 18 GHz
5.4.12 30 A		 소재지-5
RTCA DO-160G:2010 Environmental Conditions and Test Procedures for Airborne Equipment

Section 15.0 Magnetic Effect

Section 16.0 Power Input

Section 17.0 Voltage Spike

Section 18.0 Audio Frequency Conducted Susceptibility -Power Inputs

Section 19.0 Induced Signal Susceptibility

Section 20.0 Radio Frequency Susceptibility (Radiated and Conducted)


-20.6 Radiated Susceptibility(RS) Test: Alternative Procedure -Reverberation Chamber Method

Section 21.0 Emission of Radio Frequency Energy

Section 22.0 Lightning Induced Transient Susceptibility

Section 25.0 Electrostatic Discharge (ESD)		 Section 15.0 :
Dc : 1 degree

Section 16.0 :
AC : 115 V@ (360-800) Hz, 230 V@ (360-800) Hz
DC : 14 V, 28 V, 270 V

Section 17.0 :
Category A: 600 V
Category B: 2 × V
(AC RMS AND/OR DC, OR 200 V Whichever Is Less)

Section 18.0 :
10 Hz ~ 148.593 6 kHz (Max. 16 Vp-p)

Section 19.0 :
350 Hz ~ 32 kHz
(Max. 120 A-m, 5 400 V-m)

Section 20.0 :
CS: 10 kHz ~ 400 MHz
RS: 100 MHz ~ 18 GHz
(Max Peak Level 3 600 V/m, Max Average Level 490 V/m)

Section 21.0 :
CE: 150 kHz ~ 152 MHz
RE: 100 MHz ~ 6 GHz

Section 22.0 :
Waveform: 1,2,3,4,5A,5B,6,7,8

Section 25.0 :
Max. ±15 kV		 소재지-5
RTCA DO-160F:2007 Environmental Conditions and Test Procedures for Airborne Equipment

Section 15.0 Magnetic Effect

Section 16.0 Power Input

Section 17.0 Voltage Spike

Section 18.0 Audio Frequency Conducted Susceptibility -Power Inputs

Section 19.0 Induced Signal Susceptibility

Section 20.0 Radio Frequency Susceptibility (Radiated and Conducted)


-20.6 Radiated Susceptibility(RS) Test: Alternative Procedure -Reverberation Chamber

Section 21.0 Emission of Radio Frequency Energy

Section 22.0 Lightning Induced Transient Susceptibility

Section 25.0 Electrostatic Discharge (ESD)		 Section 15:0 :
Dc : 1 degree

Section 16:0 :
AC : 115 V@ (360-800) Hz, 230 V@ (360-800) Hz
DC : 14 V, 28 V, 270 V

Section 17.0 :
Category A: 600 V
Category B: 2 × V
(AC RMS AND/OR DC, OR 200 V Whichever Is Less)

Section 18.0 :
10 Hz ~ 148.593 6 kHz (Max. 16 Vp-p)

Section 19.0 :
350 Hz ~ 32 kHz
(Max. 120 A-m, 5 400 V-m)

Section 20.0 :
CS: 10 kHz ~ 400 MHz
RS: 100 MHz ~ 18 GHz
(Max Peak Level 3 600 V/m, Max Average Level 490 V/m)

Section 21.0 :
CE: 150 kHz ~ 152 MHz
RE: 100 MHz ~ 6 GHz

Section 22.0 :
Waveform: 1,2,3,4,5A,5B,6,7,8

Section 25.0 :
Max. ±15 kV		 소재지-5
MIL-STD-461G:2015 DEPARTMENT OF DEFENSE INTERFACE STANDARD, REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, audio frequency currents, power leads
5.5 CE102, conducted emissions, radio frequency potential, power leads
5.7 CS101, conducted susceptibility, power leads
5.12 CS114, conducted susceptibility, bulk cable injection
5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation
5.14 CS116, conducted susceptibility, damped sinusoidal transients, cables and power leads
5.15 CS117, conducted susceptibility, lightning induced transients, cables and power leads
5.16 CS118, personnel borne electrostatic discharge
5.17 RE101, radiated emissions, magnetic field
5.18 RE102, radiated emissions, electric field
5.20 RS101, radiated susceptibility, magnetic field
5.21 RS103, radiated susceptibility, electric field

- 2 MHz ~ 100 MHz, 200 V/m, 1 m distance
- 5.21.4 RS103 alternative test procedures - reverberation chamber (mode-tuned)		 30 Hz ~ 10 kHz

10 kHz ~ 10 MHz

30 Hz ~ 150 kHz, Max. 136 dBμV

10 kHz ~ 200 MHz, Max. 109 dBμA

Max. 5 A

10 kHz ~ 100 MHz, Max. 10 A

Waveform: 1, 2, 3, 4, 5A, 6, Multiple Stroke, Multiple Burst

Contact/Air, (±2 ~ ±15) kV

30 Hz ~ 100 kHz

10 kHz ~ 18 GHz

30 Hz ~ 100 kHz, Max. 183 dBpT

2 MHz ~ 18 GHz, Max. 200 V/m		 소재지-5
MIL-STD-461F: 2007 DEPARTMENT OF DEFENSE INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz
5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz
5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz
5.11 CS106, conducted susceptibility, transients, power leads
5.13 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
5.14 CS115, conducted susceptibility, bulk cable injection, impulse excitation
5.15 CS116, conducted susceptibility, damped sinusoidal transients, cable and power leads, 10 kHz to 100 MHz
5.16 RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz
5.17 RE102, radiated emissions, electric field, 10 kHz to 18 GHz
5.19 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
5.20 RS103, radiated susceptibility, electric field, 2 MHz to 40 GHz

- 2 MHz to 100 MHz, 200 V/m, 1 m distance
- 5.20.4 RS103 alternative test procedures - reverberation chamber (mode-tuned)		 30 Hz to 10 kHz

10 kHz to 10 MHz

30 Hz to 150 kHz

400 Vpeak

10 kHz to 200 MHz

Impulse 5 A

10 kHz to 100 MHz

30 Hz to 100 kHz

10 kHz to 18 GHz

30 Hz to 100 kHz

2 MHz to 18 GHz
Max. 200 V/m		 소재지-5
MIL-STD-461E:1999 DEPARTMENT OF DEFENSE INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
5.4 CE101, conducted emissions, power leads, 30 Hz to 10 kHz
5.5 CE102, conducted emissions, power leads, 10 kHz to 10 MHz
5.7 CS101, conducted susceptibility, power leads, 30 Hz to 150 kHz
5.12 CS114, conducted susceptibility, bulk cable injection, 10 kHz to 200 MHz
5.13 CS115, conducted susceptibility, bulk cable injection, impulse excitation
5.14 CS116, conducted susceptibility, damped sinusoidal transients, cable and power leads, 10 kHz to 100 MHz
5.15 RE101, radiated emissions, magnetic field, 30 Hz to 100 kHz
5.16 RE102, radiated emissions, electric field, 10 kHz to 18 GHz
5.18 RS101, radiated susceptibility, magnetic field, 30 Hz to 100 kHz
5.19 RS103, radiated susceptibility, electric field, 2 MHz to 40 GHz

- 2 MHz to 100 MHz, 200 V/m, 1 m distance
- 5.19.4 RS103 alternative test procedures -reverberation chamber (mode-tuned)		 30 Hz to 10 kHz

10 kHz to 10 MHz

30 Hz to 150 kHz

10 kHz to 200 MHz

Impulse 5 A

10 kHz to 100 MHz

30 Hz to 100 kHz

10 kHz to 18 GHz

30 Hz to 100 kHz

2 MHz to 18 GHz
Max. 200 V/m		 소재지-5
MIL-STD-462D:1993 DEPARTMENT OF DEFENSE TEST METHOD FOR MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS
5. CE101 CONDUCTED EMISSIONS, POWER LEADS, 30 Hz TO 10 kHz
5. CE102 CONDUTED EMISSIONS, POWER LEADS, 10 kHz TO 10 MHz
5. RADIATED EMISSIONS, MAGNETIC FIELD, 30 Hz TO 100 kHz
5. RADIATED EMISSIONS, MAGNETIC FIELD, 10 kHz TO 18 GHz
5. CS101 CONDUCTED SUSCEPTIBILITY POWER LEADS, 30 Hz TO 50 kHz
5. CONDUCTED SUSCEPTIBILITY, BULK CABLE INJECTION, 10 kHz TO 400 MHz
5. CS115 CONDUCTED SUSCEPTIBILITY, BULK CABLE INJECTION, IMPULSE EXCITATION
5. CS116 CONDUCTED SUSCEPTIBILITY, DAMPED SINUSOIDAL TRANSIENTS, CABLES AND POWER LEADS, 10 kHz TO 100 MHz
5. RS101 RADIATED SUSCEPTIBILITY, MAGNETIC FIELD, 30 Hz TO 100 kHz
5. RS103 RADIATED SUSCEPTIBILITY, ELECTRIC FIELD, 10 kHz TO 40 GHz		 30 Hz to 10 kHz

10 kHz to 10 MHz

30 Hz to 100 kHz

10 kHz to 18 GHz

30 Hz to 50 kHz

10 kHz to 400 MHz

Impulse 5 A

10 kHz to 100 MHz

30 Hz to 100 kHz

10 kHz to 18 GHz		 소재지-5
MIL-STD-461D:1993 DEPARTMENT OF DEFENSE INTERFACE STANDARD REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE EMISSIONS AND SUSCEPTIBILITY
5.3.1 CE101 (Conducted emissions, power leads, 30 Hz to 10 kHz)
5.3.2 CE102 (Conducted emissions, power leads, 10 kHz to 10 MHz)
5.3.4 CS101 (Conducted susceptibility, power leads, 30 Hz to 50 kHz)
5.3.9 CS114 (Conducted susceptibility, bulk cable injection, 10 kHz to 400 MHz)
5.3.10 CS115 (Conducted susceptibility, bulk cable injection, impulse excitation)
5.3.11 CS116 (Conducted susceptibility, damped sinusoidal transients, cables and power leads, 10 kHz to 100 MHz)
5.3.12 RE101 (Radiated emissions, magnetic field, 30 Hz to 100 kHz)
5.3.13 RE102 (Radiated emissions, electric field, 10 kHz to 18 GHz)
5.3.15 RS101 (Radiated susceptibility, magnetic field, 30 Hz to 100 kHz)
5.3.16 RS103 (Radiated susceptibility, electric field, 10 kHz to 40 GHz)

10 kHz to 100 MHz, 200 V/m, 1 m distance		 30 Hz ~ 10 kHz

10 kHz ~ 10 MHz

30 Hz ~ 50 kHz

10 kHz ~ 400 MHz

Impulse 5 A

10 kHz ~ 100 MHz

30 Hz ~ 100 kHz

10 kHz ~ 18 GHz

30 Hz ~ 100 kHz

10 kHz ~ 18 GHz
Max. 200 V/m		 소재지-5
▶ 환경 및 신뢰성
MIL-STD-750-1B w/CHANGE 2:2023 DEPARTMENT OF DEFENSE TEST METHOD STANDARD
ENVIRONMENTAL TEST METHODS FOR SEMICONDUCTOR DEVICES
PART 1: TEST METHODS 1000 THROUGH 1999

1051.9 Temperature cycling (air to air)
Exception : Condition E		 Temperature Range (-65 ~ 200) ℃ 소재지-5
MIL-STD-202H:2015 DEPARTMENT OF DEFENSE TEST METHOD STANDARD
ELECTRONIC AND ELECTRICAL COMPONENT PARTS

107 Thermal shock
Exception : Condition D, E		 Temperature Range (-65 ~ 200) ℃ 소재지-5
MIL-STD-883-1 w/CHANGE 2:2024 DEPARTMENT OF DEFENSE TEST METHOD STANDARD
ENVIRONMENTAL TEST METHODS FOR MICROCIRCUITS
PART 1: TEST METHODS 1000-1999

1010.9 Temperature cycling
Exception : Condition E		 Temperature Range (-65 ~ 200) ℃ 소재지-5
ECSS-E-10-03A:2002 Space Engineering - Testing
5.1.15 Thermal vacuum test, equipment qualification
5.1.16 Thermal cycling test, equipment qualification
5.3.5 Thermal qualification tests
6.1.10 Thermal vacuum test
6.1.11 Thermal cycling test, equipment acceptance
6.3.5 Thermal acceptance tests

5.1.10 Sinusoidal vibration test, equipment qualification
5.1.11 Random vibration test, equipment qualification
6.1.7 Random vibration test, equipment acceptance

5.1.13 Shock test, equipment qualification		 Pressure Range (1.33×10⁻⁵ ~ 101 325) Pa
Temperature Range (-70 ~ 120) ℃
Vibration Frequency Range (5 ~ 2 000) Hz
Shock Frequency Range (100 ~ 10 000) Hz		 소재지-5
ECSS-E-ST-10-03C:2012 Space Engineering - Testing
5.5.4 Thermal tests
6.5.4 Thermal tests

5.5.2.3 Random vibration test
5.5.2.5 Sinusoidal vibration test
6.5.2.7 Random vibration test
6.5.2.8 Sinusoidal vibration test

5.5.2.6 Shock test
6.5.2.9 Shock test		 Pressure Range (1.33×10⁻⁵ ~ 101 325) Pa
Temperature Range (-70 ~ 120) ℃
Vibration Frequency Range (5 ~ 2 000) Hz
Shock Frequency Range (100 ~ 10 000) Hz		 소재지-5
MIL-STD-810F:2000 DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

METHOD 500.4 Low Pressure (Altitude)

Procedure III, Procedure IV

METHOD 501.4 High Temperature
METHOD 502.4 Low Temperature

METHOD 514.5 VIBRATION

Category 4 - Truck/trailer/tracked - restrained cargo
Category 5 - Truck/trailer/tracked - loose cargo		 Pressure Range (4 488 ~ 101 325) Pa

Temperature Range (-70 ~ 120) ℃

Vibration Frequency Range (5 ~ 2 000) Hz		 소재지-5
MIL-STD-810G:2008 DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

METHOD 500.5 Low Pressure (Altitude)

Procedure III, Procedure IV

METHOD 501.5 High Temperature
METHOD 502.5 Low Temperature

METHOD 514.6 VIBRATION

Category 4 - Truck/Trailer - Secured cargo
Category 5 - Truck/trailer - loose cargo		 Pressure Range (4 488 ~ 101 325) Pa

Temperature Range (-70 ~ 120) ℃

Vibration Frequency Range (5 ~ 2 000) Hz		 소재지-5
MIL-STD-810H:2019 DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

METHOD 500.6 Low Pressure (Altitude)

Procedure III, Procedure IV

METHOD 501.7 High Temperature
METHOD 502.7 Low Temperature

METHOD 514.8 VIBRATION


Category 4 - Truck/Trailer - Secured cargo
Category 5 - Truck/trailer - loose cargo		 Pressure Range (4 488 ~ 101 325) Pa

Temperature Range (-70 ~ 120) ℃

Vibration Frequency Range (5 ~ 2 000) Hz		 소재지-5
SMC-S-016:2014 TEST REQUIREMENTS FOR LAUNCH,
UPPER-STAGE AND SPACE VEHICLES
6.3.8 Unit Thermal Cycle Test
6.3.9 Unit Thermal Vacuum Test
7.3.7 Subsystem Thermal Vacuum Test
8.3.8 Vehicle Thermal Vacuum Test

6.3.5 Unit Vibration Test
7.3.4 Subsystem Vibration Test
8.3.6 Vehicle Vibration Test

6.3.4 Unit Shock Test
7.3.6 Subsystem Shock Test
8.3.4 Vehicle Shock Test		 Pressure Range (1.33×10⁻⁵ ~ 101 325) Pa
Temperature Range (-70 ~ 120) ℃
Vibration Frequency Range (5 ~ 2 000) Hz
Shock Frequency Range (100 ~ 10 000) Hz		 소재지-5
MIL-STD-1540C:1994 TEST REQUIREMENTS FOR LAUNCH,
UPPER-STAGE, AND SPACE VEHICLES
6.1.3 Thermal Vacuum and Thermal Cycle Tests
6.2.7 Thermal Cycle Test, Vehicle Qualification
6.2.9 Thermal Vacuum Test, Vehicle Qualification
6.3.4 Thermal Vacuum Test, Subsystem Qualification
6.4.2 Thermal Cycle Test, Electrical and Electronic Unit Qualification
6.4.3 Thermal Vacuum Test, Unit Qualification
7.2.7 Thermal Cycle Test, Vehicle Acceptance
7.2.8 Thermal Vacuum Test, Vehicle Acceptance
7.4.2 Thermal Cycle Test, Electrical and Electronic Unit Acceptance
7.4.3 Thermal Vacuum Test, Unit Acceptance

6.2.5 Vibration Test, Vehicle Qualification
6.3.2 Vibration Test, Subsystem Qualification
6.4.4 Vibration Test, Unit Qualification
7.2.5 Vibration Test, Vehicle Acceptance
7.4.4 Vibration Test, Unit Acceptance

6.2.3 Shock Test, Vehicle Qualification
6.4.6 Shock Test, Unit Qualification
7.2.3 Shock Test, Vehicle Acceptance
7.4.6 Shock Test, Unit Acceptance		 Pressure Range (1.33×10⁻⁵ ~ 101 325) Pa
Temperature Range (-70 ~ 120) ℃
Vibration Frequency Range (5 ~ 2 000) Hz
Shock Frequency Range (100 ~ 10 000) Hz		 소재지-5
▶ 전자기적합성
ISO 16750-2:2012 Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2 : Electrical loads Freq. : 50 Hz ~ 25 kHz
Voltage : -28 V ~ 202 V		 소재지-6
ISO 11452-9:2012 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9 : Portable transmitters Freq. : 26 MHz ~ 5.85 GHz 소재지-6
ISO 11452-8:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8 : Immunity to magnetic fields Freq. : DC, 15 Hz ~ 150 kHz MFS : DC 3 000 A/m, AC 1 000 A/m 소재지-6
ISO 11452-4:2020 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4 : Harness excitation methods BCI : 1 MHz ~ 400 MHz, 200 mA
TWC : 400 MHz ~ 3 GHz, 33 dBm		 소재지-6
ISO 11452-2:2019 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2 : Absorber-lined shielded enclosure Freq. : 80 MHz ~ 18 GHz
E/F : 100 V/m		 소재지-6
ISO 11452-1:2015 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1 : General principles and terminology - 소재지-6
ISO 10605:2008+A1:2014 Road vehicles - Test methods for electrical disturbances from electrostatic discharge Voltage : ±25 kV 소재지-6
CISPR 35:2016 Electromagnetic compatibility of multimedia equipment - Immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 1 A/m
V-DIP : ＜5 %, 0.5 cycle
70 %, 25/30 cycles (50/60) Hz
Voltage interruptions :
＜5 %, 250/300 cycles (50/60) Hz
SPL : 0.15 MHz ~ 1 GHz		 소재지-6
KS C 9610-4-11:2020 전자파적합성(EMC) - 제4-11부: 시험 및 측정 기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 30 cycle
40 %, 12 cycle
80 %, 300 cycle
0 %, 300 cycle		 소재지-6
KS C 9610-4-2:2017 전자파적합성(EMC) - 제4-2부: 시험 및 측정 기술 - 정전기 방전 내성시험 전압 : Max. 15 kV 소재지-6
KS C 9610-4-3:2017 전자파적합성(EMC) - 제4-3부 : 시험 및 측정 기술 - 방사성 RF 전자기장 내성 시험 Freq. : 80 MHz ~ 6 GHz
전계강도 : 10 V/m		 소재지-6
KS C CISPR 25:2017 차량과 보트 및 내연기관 - 무선 방해 특성 - 장착된 수신기 보호를 위한 측정 한계값과 측정 방법
<제외 항목>
제5부 : 동일한 차량의 안테나에 의해 수신된 방출측정
제6부 : 5 ~ 6. 컴포넌트/모듈로부터의 복사성 방출 - TEM 셀(cell) 법, 스트립라인(stripline) 법		 CE-V : 150 kHz ~ 108 MHz
CE-S : 150 kHz ~ 245 MHz
RE : 150 kHz ~ 2.5 GHz		 소재지-6
KS C 9990:2017 자동차 및 내연기관 구동기기류 전자파적합성(EMC) 시험방법 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms
EFT : ±2 kV
Surge : ±2 kV
교류입력전류 : 단상 ≤16 A
삼상 16 A ~ 75 A		 소재지-6
KS C 9835:2019 멀티미디어기기 전자파 내성 시험방법 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 1 A/m
V-DIP : ＜5 %, 0.5 cycle
70 %, 30 cycle
＜5 %, 300 cycle
SPL : 0.15 MHz ~ 1 GHz		 소재지-6
KS C 9832:2024 멀티미디어기기 전자파 방해 시험방법 CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-6
KS C 9815:2023 조명기기 및 유사 기기의 무선 방해 특성 측정 허용기준과 측정방법
<제외항목>
4.2항 삽입손실
4.4.1항 표3a의 방사 전자기 방해 중 3 m, 4 m 루프 측정		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-6
KS C 9814-2:2022 전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부：내성 ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
40 %, 12 cycle
70 %, 30 cycle		 소재지-6
KS C 9814-1:2022 전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제1부：방출 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 30 MHz ~ 6 GHz		 소재지-6
KS C 9811:2019 산업, 과학, 의료용(ISM)기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
(30 m 측정 제외)		 소재지-6
KS C 9610-6-4:2022 전자파적합성(EMC) - 제6-4부 : 일반기준 - 산업 환경에서 사용하는 기기의 전자파 방해 표준 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-6
KS C 9610-6-3:2023 전자파적합성(EMC) - 제6-3부 : 일반 기준 - 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-6
KS C 9610-6-2:2019 전자파적합성(EMC) - 제6-2부 : 일반표준 - 산업 환경에서 사용하는 기기의 전자파 내성 표준 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 1 cycle
40 %, 12 cycle
70 %, 30 cycle
0 %, 300 cycle		 소재지-6
KS C 9610-6-1:2019 전자파적합성(EMC) - 제6-1부 : 일반표준 - 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파내성 표준 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 30 cycle
0 %, 300 cycle		 소재지-6
KS C 9610-4-9:2019 전자파적합성(EMC) - 제 4-9부: 시험 및 측정 기술 - 임펄스 자기장 내성시험 자기장 : 1 000 A/m 소재지-6
KS C 9610-4-8:2017 전자파적합성(EMC) - 제4-8부: 시험 및 측정 기술 - 전원 주파수 자기장 내성 시험 최대자기장 
(연속필드) 100 A/m
(짧은지속) 1 000 A/m		 소재지-6
KS C 9610-4-6:2020 전자파적합성(EMC) - 제4-6부: 시험 및 측정 기술 - 전도성 RF 전자기장 내성 시험 Freq. : 150 kHz ~ 230 MHz
Voltage : 10 V		 소재지-6
KS C 9610-4-5:2023 전자파적합성(EMC) - 제4-5부: 시험 및 측정 기술 - 서지 내성 시험 Voltage : ±4 kV 소재지-6
KS C 9610-4-4:2020 전자파적합성(EMC) - 제4-4부: 시험 및 측정 기술 - 전기적 빠른 과도현상, 버스트 내성 시험 전압 : Max. 4 kV 소재지-6
CISPR 32:2015+AMD1:2019 Electromagnetic compatibility of multimedia equipment - Emission requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-6
ISO 7637-1:2015 Road vehicles - Electrical disturbances from conduction and coupling - Part 1 : Definitions and general considerations - 소재지-6
ISO 7637-2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2 : Electrical transient conduction along supply lines only TI : -600 V ~ 300 V
TE : 1 000 ns ~ 1 000 ms		 소재지-6
EN 62040-2:2018 Uninterruptible power systems(UPS) - Part 2 : Electromagnetic compatibility(EMC) requirements CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m		 소재지-6
KS C 9610-3-3:2023 전자파적합성(EMC) - 제3-3부: 허용기준 - 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준 (상당 16 A 이하 기기) 교류입력전류 : 단상 ≤16 A 소재지-6
KS C 9610-3-2:2023 전자파적합성(EMC) - 제3-2부 : 허용기준 - 고조파 전류의 허용기준 (상당 입력 전류 16 A 이하 기기) 교류입력전류 : 단상 ≤16 A 소재지-6
KS C 9610-3-12:2023 전자파적합성(EMC) - 제3-12부 : 허용기준 - 공공 저압 배전망에 연결된 기기에서 발행하는 고조파 전류의 허용기준 (16 A<상당입력전류≤75 A) 교류입력전류 : 16 A ~ 75 A
220 V ~ 240 V (단상)
380 V ~ 690 V (삼상)		 소재지-6
KS C 9610-3-11:2023 전자파적합성(EMC) - 제3-11절 : 허용기준-공공 저압 배전망에서의 전압변동 및 플리커에 대한 허용기준(상당 정격전류 75 A 이하와 조건부 연결 기기) 교류입력전류 : 16 A ~ 75 A
220 V ~ 250 V (L-N)		 소재지-6
KS C 9547:2023 일반 조명기기 - 전자파적합성(EMC) 내성 요구사항 ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 70 %, 12 cycle
0 %, 0.5 cycle		 소재지-6
KS C 9040-2:2025 무정전전원장치(UPS)－제2부：전자기적합성(EMC) 요구사항 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V		 소재지-6
ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3 : Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines TI : -150 V ~ 150 V 소재지-6
CISPR 25:2016 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limit and methods of measurement for the protection of on-board receivers
 
5 Measurement of emissions received by an antenna on the same vehicle  
6.6 Radiated emissions from components/modules - TEM cell method  
6.7 Radiated emissions from components/modules - Strip line method		 CE-V : 150 kHz ~ 108 MHz
CE-S : 150 kHz ~ 245 MHz
RE : 150 kHz ~ 2.5 GHz		 소재지-6
KS R IEC  61851-21-2:2018 전기자동차 전도성 충전시스템 - 제21-2부: 교류/직류 전원 전도성 접속의 전기자동차 요구사항 - 비탑재형 전기자동차 충전시스템에 대한 EMC 요구사항 RE : 2 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
Harmonic : (2-40) 고주파, 단상 ≤16 A
삼상 각 상당 ≤75 A
Flicker : 단상 ≤16 A
삼상 각 상당 ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
Transient voltage: (0~2) kV		 소재지-6
EN IEC 61851-21-2:2021 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems RE : 2 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
Harmonic : (2-40), Single phase ≤16 A
3-phase per phase ≤75 A
Flicker : Single phas ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
Transient voltage: (0~2) kV		 소재지-6
IEC 61851-21-2:2018 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems RE : 2 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
Harmonic : (2-40), Single phase ≤16 A
3-phase per phase ≤75 A
Flicker : Single phas ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
Transient voltage: (0~2) kV		 소재지-6
IEC 61000-4-8:2009 Electromagnetic compatibility (EMC) - Part 4-8 : Testing and measurement techniques - Power frequency magnetic field immunity test Maximum magnetic field
(continuous field) 100 A/m
(Short persistence) 1 000 A/m		 소재지-6
IEC 61000-4-9:2016 Electromagnetic compatibility (EMC)
- Part 4-9 : Testing and measurement techniques - Pulse magnetic field immunity test		 Pulse MFS : 1 000 A/m 소재지-6
EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Freq. : 1 Hz ~ 10 GHz 소재지-6
FCC part 15:2024 Radio Frequency Device Subpart B - Unintentional Radiators CE : 150 kHz ~ 30 MHz
RE : Max. 18 GHz		 소재지-6
FCC part 18:2024 Industrial, scientific and medical device CE : 150 kHz ~ 30 MHz
RE : Max. 18 GHz		 소재지-6
IEC 60601-1-2:2014+AMD1:2020 Medical electrical equipment - Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbance - Requirements and tests CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
(At 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °and 315 °)
0 %, 1 cycles (At 0 °)
70 %, 25/30 cycles (50/60) Hz, (At 0 °)
0 %, 250/300 cycles (50/60) Hz
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-6
IEC 61000-3-11:2017 Electromagnetic compatibility (EMC)
- Part 3-11 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection		 AC input current : 16 A ~ 75 A
220 V ~ 250 V (L-N)		 소재지-6
IEC 61000-3-12:2011+AMD1:2021 Electromagnetic compatibility (EMC)
- Part 3-12 : Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current ＞16 A and ≤75 A per phase		 AC input current : 16 A ~ 75 A
220 V ~ 240 V (Single phase)
380 V ~ 690 V (Three phase)		 소재지-6
IEC 61000-3-2:2018+AMD1:2020+AMD2:2024 Electromagnetic compatibility (EMC)
- Part 3-2 : Limits - Limits for harmonic current emissions (equipment input current ≤16 A per Phase)		 AC input current : ≤16 A (Single phase) 소재지-6
IEC 61000-3-3:2013+AMD1:2017+AMD2:2021 Electromagnetic compatibility (EMC)
- Part 3-3 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current ≤16 A per phase and not subject to conditional connection		 AC input current : ≤16 A (Single phase) 소재지-6
IEC 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles(50/60) Hz
40 %, 10/12 cycles(50/60) Hz
80 %, 250/300 cycles(50/60) Hz
0 %, 250/300 cycles(50/60) Hz		 소재지-6
IEC 61000-4-13:2002+AMD1:2009
+AMD2:2015		 Electromagnetic compatibility (EMC) - Part 4-13 : Testing and measurement techniques - Harmonics and inter-harmonics including mains signalling at a.c. power port, low frequency immunity tests Freq. : 16 Hz ~ 2.4 kHz
Voltage : U1 x 12 %		 소재지-6
IEC 61000-4-14:1999+AMD1:2001
+AMD2:2009		 Electromagnetic compatibility (EMC) - Part 4-14 : Testing and measurement techniques - Voltage fluctuations immunity test for equipment with input current not exceeding 16 A per phase Voltage : ±12 % Un 소재지-6
IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2 : Testing and measurement techniques - Electrostatic discharge immunity test Voltage : ±15 kV 소재지-6
IEC 61000-4-3:2020 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated radio-frequency, electromagnetic field immunity test Freq. : 80 MHz ~ 18 GHz
E/F : 30 V/m		 소재지-6
IEC 61000-4-4:2012 Electromagnetic compatibility (EMC) - Part 4-4 : Testing and measurement techniques - Electrical fast transient/burst immunity test Voltage : ±4 kV 소재지-6
IEC 61000-4-5:2014+AMD1:2017 Electromagnetic compatibility (EMC)
- Part 4-5 : Testing and measurement techniques - Surge Immunity test		 Surge : ±7 kV 소재지-6
IEC 61000-4-6:2023 Electromagnetic compatibility (EMC) - Part 4-6 : Testing and measurement techniques - Immunity to Conducted Disturbances, Induced by radio-frequency Fields Freq. : 150 kHz ~ 230 MHz
Voltage : 10 V		 소재지-6
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1 : Generic standards - Immunity for residential, commercial and light-industrial environments ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2 : Generic standards - Immunity for industrial environments ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
KS C IEC 60601-1-2:2020 의료용 전기 기기 - 제1-2부 : 기본안전 및 필수 성능에 관한 일반 요구 사항 - 보조 표준 : 전자파 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
(At 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °and 315 °)
0 %, 1 cycles (At 0 °)
70 %, 25/30 cycles (50/60) Hz, (At 0 °)
Voltage interruptions : 0 %, 250/300 cycles (50/60) Hz
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-6
IEC 61000-6-3:2020 Electromagnetic compatibility (EMC) - Part 6-3 : Generic standards - Emission standard for residential, commercial and light-industrial environments CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
(2-40) Harmonic
Flicker : Single phase ≤16 A
3-phase per phase ≤75 A
RE : Max. 6 GHz		 소재지-6
IEC 61000-6-4:2018 Electromagnetic compatibility (EMC) - Part 6-4 : Generic standards - Emission standard for industrial environments CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-6
IEC 61326-2-1:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61326-2-2:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61326-2-3:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61326-2-4:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61326-2-5:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1 ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61547:2020 Equipment for general lighting purposes - EMC immunity requirements ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
70 %, 10 cycles		 소재지-6
IEC 62040-2:2016 Uninterruptible power systems(UPS) - Part 2 : Electromagnetic compatibility(EMC) requirements CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m		 소재지-6
IEC 62233:2005 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Freq. : 1 Hz ~ 10 GHz 소재지-6
CISPR 11:2015+AMD1:2016+AMD2:2019 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
(30 m 측정 제외)		 소재지-6
CISPR 14-1:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz		 소재지-6
CISPR 14-2:2020 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : Immunity - Product family standard ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz		 소재지-6
CISPR 15:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.2 Insertion loss
4.4.1 Table 3a - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-6
EN 61000-4-39:2017 Electromagnetic compatibility (EMC) - Part 4-39 : Testing and measurement techniques - Radiated fields in close proximity - immunity test PMF : 9 kHz ~ 26 MHz 소재지-6
IEC 61000-4-39:2017 Electromagnetic compatibility (EMC) - Part 4-39 : Testing and measurement techniques - Radiated fields in close proximity - immunity test PMF : 9 kHz ~ 26 MHz 소재지-6
IEC 61326-2-6:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : Particular requirements - In vitro diagnostic(IVD) medical equipment RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
IEC 61326-1:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : General requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : Particular requirements - In vitro diagnostic(IVD) medical equipment RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61326-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : General requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 55014-2:2021 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2 : Immunity - Product family standard ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz		 소재지-6
EN 60601-1-2:2015+A1:2021 Medical electrical equipment - Part 1-2 : General requirements for basic safety and essential performance - Collateral standard : Electromagnetic compatibility - Requirements and tests CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
(At 0 °, 45 °, 90 °, 135 °, 180 °, 225 °, 270 °and 315 °)
0 %, 1 cycles (At 0 °)
70 %, 25/30 cycles (50/60) Hz, (At 0 °)
Voltage interruptions : 0 %, 250/300 cycles (50/60) Hz
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-6
CISPR 25 Ed5.0:2021 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limit and methods of measurement for the protection of on-board receivers

 6.6 Radiated emissions from components/modules - TEM cell method		 CE Voltage Method : 0.15 MHz ~ 108 MHz
CE Current Method : 0.15 MHz ~ 245 MHz
RE(ALSE) : 0.15 MHz ~ 5 925 GHz		 소재지-6
ISO 11452-9 Ed2.0:2021 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9 : Portable transmitters

8.3.3.2 Testing with broadband sleeve antenna
8.3.3.3 Testing with sleeve
8.3.3.6 Testing with HF broadband sleeve antenna		 Frequency range : 142 MHz ~ 6 GHz 소재지-6
EN 61000-4-5:2014+A1:2017 Electromagnetic compatibility (EMC)
- Part 4-5 : Testing and measurement techniques - Surge immunity test		 Surge : ±7 kV 소재지-6
EN 61000-4-6:2023 Electromagnetic compatibility (EMC) - Part 4-6 : Testing and measurement techniques - Immunity to conducted disturbance, induced by radio-frequency fields Freq. : 150 kHz ~ 230 MHz
Voltage : 10 V		 소재지-6
EN 61000-4-8:2010 Electromagnetic compatibility (EMC) - Part 4-8 : Testing and measurement techniques - Power frequency magnetic field immunity test 최대 자기장
(연속 필드) 100 A/m
(짧은 지속) 1 000 A/m		 소재지-6
EN 61000-4-9:2016 Electromagnetic compatibility (EMC) - Part 4-9 : Testing and measurement techniques - Pulse magnetic field immunity test Pulse MFS : 1 000 A/m 소재지-6
EN 61000-6-1:2019 Electromagnetic compatibility (EMC) - Part 6-1 : Generic standards - Immunity for residential, commercial and light-industrial environments ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61000-6-2:2019 Electromagnetic compatibility (EMC) - Part 6-2 : Generic standards - Immunity for industrial environments ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61000-6-3:2021 Electromagnetic compatibility (EMC)
- Part 6-3 : Generic standards - Emission standard for residential, commercial and light-industrial environments		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic : (2-40) 고주파
Flicker : 단상 ≤16 A
삼상 각 상당 ≤75 A
RE : Max. 6 GHz		 소재지-6
EN 61000-6-4:2019 Electromagnetic compatibility (EMC)
- Part 6-4 : Generic standards - Emission standard for industrial environments		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz		 소재지-6
EN 61326-2-1:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1 : Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61326-2-2:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61326-2-4:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61326-2-5:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
EN 61000-4-2:2009 Electromagnetic compatibility (EMC) - Part 4-2 : Testing and measurement techniques - Electrostatic discharge immunity test Voltage : ±15 kV 소재지-6
EN 61000-4-14:1999+A2:2009 Electromagnetic compatibility (EMC) - Part 4-14 : Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase Voltage : ±12 % Un 소재지-6
EN 61000-4-4:2012 Electromagnetic compatibility (EMC) - Part 4-4 : Testing and measurement techniques - Electrical fast transient/burst immunity test Voltage : ±4 kV 소재지-6
EN 61000-4-3:2020 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electro magnetic field immunity test Freq. : 80 MHz ~ 18 GHz
전계강도 : 30 V/m		 소재지-6
KS C IEC 61000-4-13:2015 전기자기적합성(EMC) - 제4-13부 : 시험 및 측정기술 - 교류전원 포트에서 주전원 신호를 포함하는 고조파와 내부고조파, 저주파 내성 시험 Freq. : 16 Hz ~ 2.4 kHz
Voltage : U1 x 12 %		 소재지-6
EN 301 489-1 V2.2.3 (2019-11) Electromagnetic Compatibility (EMC) standard for radio  equipment and services;
Part1 : Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic : (2-40) 고주파
Flicker : 단상 ≤16 A
삼상 각 상당 ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
TI : -600 V ~ 300 V		 소재지-6
ECE R-10.05:2014 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

Annex 4 : Method of measuring broadband electromagnetic disturbances generated by vehicles
Annex 5 : Method of measuring narrowband electromagnetic disturbances generated by vehicles
Annex 6 : Method of testing vehicle immunity to electromagnetic radiation		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 80 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms
EFT : ±2 kV
Surge : ±2 kV
Harmonic : (2-40) 고주파
Flicker : 단상 ≤16 A
삼상 각 상당 ≤75 A		 소재지-6
EN 61547:2009 Equipment for general lighting purposes EMC immunity requirements RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 3 A/m
V-DIP : 0 %, 0.5 cycle
70 %, 10 cycles		 소재지-6
EN 301 489-2 V2.1.1 (2019-04) Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part2 : Specific conditions for radio paging equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic : (2-40) 고주파
Flicker : 단상 ≤16 A
삼상 각 상당 ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
TI : -600 V ~ 300 V		 소재지-6
EN 301 489-3 V2.1.1 (2019-03) Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part3 : Specific conditions for Short - Range Devices(SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
Harmonic : (2-40) 고주파
Flicker : 단상 ≤16 A
삼상 각 상당 ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
TI : -600 V ~ 300 V		 소재지-6
EN 301 489-17 V3.2.4 (2020-09) Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part17 : Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
(2-40) Harmonic
Flicker : Single phase ≤ 16 A
3-phase per phase ≤ 75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
TI : -600 V ~ 300 V		 소재지-6
EN 50130-4:2011+A1:2014 Alarm systems - Part 4 : Electromagnetic compatibility - Product family standard : Immunity requirements for components of fire, intruder hold up, CCTV, access control and social alarm systems ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 100 MHz, 10 V
V-DIP : 0 %, 250 cycle
40 %, 10 cycles
70 %, 25 cycles
80 %, 250 cycles		 소재지-6
EN 50498:2010 Electromagnetic compatibility (EMC) - Product family standard for after market electronic equipment in vehicles RE : 30 MHz ~ 1 GHz
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms		 소재지-6
EN 55011:2016+A2:2021 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
(30 m 측정 제외)		 소재지-6
EN IEC 55014-1:2021 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : Emission CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz
RE : 9 kHz ~ 6 GHz		 소재지-6
EN 55015:2013+A1:2015 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.2 Insertion loss
4.4.1 Table 3a - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-6
EN 55032:2015+A1:2020 Electromagnetic compatibility of multimedia equipment - Emission Requirements CE(power ports) : 150 kHz ~ 30 MHz
CE(signal ports) : 150 MHz ~ 2.15 GHz
RE : 30 MHz ~ 6 GHz		 소재지-6
EN 55035:2017+A11:2020 Electromagnetic compatibility of multimedia equipment - Immunity Requirements ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 1 A/m
V-DIP : ＜5 %, 0.5 cycle
70 %, 25/30 cycles (50/60) Hz
＜5 %, 250/300 cycles (50/60) Hz
SPL : 0.15 MHz ~ 1 GHz		 소재지-6
EN 61000-3-11:2019 Electromagnetic compatibility (EMC)
- Part 3-11 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤75 A and subject to conditional connection		 교류입력전류 : 16 A ~ 75 A
220 V ~ 250 V (L-N)		 소재지-6
EN 61000-3-12:2011 Electromagnetic compatibility (EMC)
- Part 3-12 : Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current ＞16 A and ≤ 75 A per phase		 교류입력전류 : 16 A ~ 75 A
220 V ~ 240 V (단상)
380 V ~ 690 V (삼상)		 소재지-6
EN 61000-3-2:2019+A1:2021 Electromagnetic compatibility (EMC)
- Part 3-2 : Limits - Limits for harmonic current emissions (equipment input current ≤16 A per Phase)		 교류입력전류 : 단상 ≤16 A 소재지-6
EN 61000-3-3:2013+A2:2021 Electromagnetic compatibility (EMC)
- Part 3-3 : Limits - Limitation of voltage change, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection		 교류입력전류 : 단상 ≤16 A 소재지-6
EN 61000-4-11:2020 Electromagnetic compatibility (EMC) - Part 4-11 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles(50/60) Hz
40 %, 10/12 cycles(50/60) Hz
80 %, 250/300 cycles(50/60) Hz
0 %, 250/300 cycles(50/60) Hz		 소재지-6
EN 61000-4-13:2002+A2:2016 Electromagnetic compatibility (EMC) - Part 4-13 : Testing and measurement techniques - Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests Freq. : 16 Hz ~ 2.4 kHz
Voltage : U1 x 12 %		 소재지-6
KS R ISO 11452-2:2013 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제2부 : 흡수재 차폐실 Freq. : 80 MHz ~ 18 GHz
전계강도 : 100 V/m		 소재지-6
KS R ISO 11452-4:2013 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제4부 : 배선 여기법 BCI : 1 MHz ~ 400 MHz, 200 mA
TWC : 400 MHz ~ 3 GHz, 33 dBm		 소재지-6
KS R ISO 11452-8:2013 도로 차량 - 협대역의 전자기 에너지 방사에 의한 전기 외란 - 부품 시험방법 - 제8부 : 자기장에 대한 면역성 Freq. : 15 Hz ~ 150  kHz
M/F : AC 3 000 A/m		 소재지-6
KS R ISO 11452-9:2012 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제9부 : 휴대용 송신기 Freq. : 26 MHz ~ 5.85 GHz 소재지-6
KS R ISO 7637-1:2015 도로 차량 - 전도와 커플링에 의한 전기적인 방해 - 제1부 : 정의 및 일반 고려사항 - 소재지-6
KS R ISO 7637-2:2015 도로 차량 - 전도와 커플링에 의한 전기적인 방해 - 제2부 : 전원 공급선만의 전기적인 과도 전도 TI : -600 V ~ 300 V
TE : 1 000 ns ~ 1 000 ms		 소재지-6
KS R ISO 7637-3:2015 도로 차량 - 전도와 커플링에 의한 전기적인 방해 - 제3부 : 전원 공급선 이외의 전선을 통한 용량성과 유도성 커플링에 의한 전기적인 과도 전송 TI : -120 V ~ 80 V 소재지-6
TCVN 7186:2018 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment RE : 9 kHz ~ 300 MHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-6
TCVN 7189:2009 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz		 소재지-6
TCVN 7317:2003 Information technology equipment - Immunity characteristics- Limits and methods of measurement ESD : ±8 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz, 3 V
M/F : 1 A/m
V-DIP : 0 %, 0.5 cycle
70 %, 25 cycle
0 %, 250 cycle		 소재지-6
TCVN 7492-1:2018 Electromagnetic compatibility -Requirements for household appliances, electric tools and similar apparatus Part 1: Emission RE : 30 MHz ~ 1 GHz
CE : 148.5 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz		 소재지-6
식품의약품안전처 고시 제2020-29호(2020.05.01) 의료기기의 전자파 안전에 관한 공통기준규격 RE : 150 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2.5 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 3 A/m
V-DIP : ＜5 %, 0.5 cycle
40 %, 5 cycle
70 %, 25 cycle
＜5 %, 300 cycle		 소재지-6
산업통상자원부 고시 제2024-115호(2024.07.17) 전기자동차 충전기 기술기준
8.2.1 전자파적합성		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 1 cycle
40 %, 12 cycle
70 %, 30 cycle
0 %, 300 cycle		 소재지-6
KS C IEC 61000-4-14:2010 전기자기적합성(EMC) - 제4-14부 : 시험 및 측정 기술 - 상당 입력전류가 16 A 이하인 기기의 전압 변동 내성 시험 Voltage : ±12 % Un 소재지-6
KS C IEC 61326-1:2008 계측제어 및 실험실 용도를 위한 전기기기－전자기적합성 요구사항－제1부 : 일반 요구사항 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : 최대 ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0 %, 0.5 cycle
0 %, 1 cycle
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz		 소재지-6
KS R ISO 11452-1:2013 도로 차량 - 협대역의 전기자기 에너지 방출에 따른 전기적인 방해에 대한 부품 시험방법 - 제1부 : 일반 원리 및 용어 - 소재지-6
산업통상자원부 고시 제2025-149호(2025.08.29) 전력량계 기술기준
제1-1절 전력량계 일반 요구사항
9.2 전자기적 적합성
제1-2절 교류 유도형 전력량계 형식승인 기준
9.2 전자기적 적합성
제1-3절 교류 전자식 전력량계 형식승인 기준
9.2 전자기적 적합성
제1-4절 직류 전자식 전력량계 형식승인 기준
9.2 전자기적 적합성		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ±15 kV
RS : 80 MHz ~ 2 GHz, 30 V/m
EFT : ±4 kV
Surge : ±4 kV
Ringwave : ±2.5 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 0.5 mT
V-DIP : 0 %, 1 cycle
40 %, 12 cycle
70 %, 30 cycle
0 %, 300 cycle		 소재지-6
▶ 소프트웨어
ISO/IEC TS 25058:2024 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Guidance for quality evaluation of artificial intelligence (AI) systems - 소재지-7
ISO/IEC TR 24028:2020 Information technology - Artificial intelligence - Overview of trustworthiness in artificial intelligence - 소재지-7
ISO/IEC 25023:2016 Systems and software engineering - Systems and software Quality Requirements and Evaluation(SQuaRE) - Measurement of system and software product quality - 소재지-7
KS X ISO/IEC 25023:2016 시스템 및 소프트웨어 공학 - 시스템 및 소프트웨어 품질 요구사항 및 평가(SQuaRE) - 시스템 및 소프트웨어 제품 품질 측정 - 소재지-7
ISO/IEC 25051:2014 Software engineering - Systems and software Quality Requirements and Evaluation(SQuaRE) - Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing - 소재지-7
KS X ISO/IEC 25051:2014 소프트웨어 공학 - 시스템 및 소프트웨어 품질 요구사항 및 평가(SQuaRE) - 즉시 사용 가능한 소프트웨어 제품(RUSP)의 품질 요구사항 및 테스팅 지침 - 소재지-7
과학기술정보통신부고시 제2024-41호 (2024.10.29.) 소프트웨어 품질인증 운영에 관한 지침 - 소재지-7
ISO/IEC 25024:2015 Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Measurement of data quality - 소재지-7
ISO/IEC TS 4213:2022 Information technology - Artificial intelligence -Assessment of machine learning classification performance - 소재지-7
▶ 환경 및 신뢰성
KS C IEC 60068-2-1:2007 환경 시험 - 제 2-1부 : 시험 - 시험 A : 내한성 시험 최저온도: (-70 ~ 5) ℃ 소재지-8
KS C IEC 60068-2-2:2007 환경 시험 - 제 2-2부 : 시험 - 시험 B : 내열성 시험 최고온도: (30 ~ 155) ℃ 소재지-8
KS C IEC 60068-2-6:2007 환경 시험 - 제 2-6부 : 시험 -  시험 Fc : 진동(정현파) 주파수: (5 ~ 2 000) Hz
최대진폭: (0.15 ~ 100) mm(p-p)
최대가속도: (10 ~ 200) m/s²		 소재지-8
KS C IEC 60068-2-11:2021 환경 시험 - 제2-11부: 시험 - 시험 Ka: 염수분무시험 온도: (35 ± 2) ℃
염화소듐의 농도: (50 ± 5) g/L		 소재지-8
KS C IEC 60068-2-14:2023 환경 시험 - 제 2-14부 : 시험 - 시험 N : 온도 변화
<제외항목>
9. 시험 Nc: 온도의 급변(2욕조법)		 고온: (60 ~ 180) ℃
저온: (-75 ~ 0) ℃		 소재지-8
KS C IEC 60068-2-30:2005 환경시험 - 제2-30부: 시험 - 시험 Db와 지침: 주기적 내습 (12 h + 12 h 주기) 온도범위: (10 ~ 90) ℃
습도범위: (20 ~ 95) % R.H.		 소재지-8
KS C IEC 60068-2-38:2021 환경 시험 - 제 2-38부 : 시험 - 시험 Z/AD: 합성 온도/습도 사이클 시험 온도범위: (10 ~ 90) ℃
습도범위: (20 ~ 95) % R.H.		 소재지-8
KS C IEC 60068-2-64:2019 환경 시험 - 제 2-64부 : 시험 - 시험 Fh: 광대역 불규칙 진동 시험 및 지침 주파수: (5 ~ 2 000) Hz
최대진폭: (0.15 ~ 100) mm(p-p)
최대가속도: (10 ~ 200) m/s²		 소재지-8
KS C IEC 60068-2-78:2012 환경시험 - 제2-78부: 시험 - 시험 Cab: 안정 상태의 내습성 시험 온도범위: (10 ~ 90) ℃
습도범위: (20 ~ 95) % R.H.		 소재지-8
MIL-STD-167-1A:2005 DEPARTMENT OF DEFENSE TEST METHOD STANDARD: MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE I-ENVIRONMENTAL AND TYPE II-INTERNALLY EXCITED)

Type I - environmental vibration		 Frequency : (4 ~ 33) Hz
Maximum Amplitude : (0.1 ± 0.01) inch		 소재지-8
MIL-STD-810F:2000 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

501.4 High Temperature

502.4 Low Temperature

503.4 Temperature Shock

507.4 Humidity

509.4 Salt Fog

513.5 Acceleration

514.5 Vibration


Category 4 - Truck/trailer/tracked - restrained cargo
Category 5 - Truck/trailer/tracked - loose cargo

516.5 Shock
Procedure I - Functional Shock
Procedure II - Materiel to be packaged
Procedure III - Fragility
Procedure V - Crash hazard		 High possible temperature: (15 ~ 150) ℃

Low possible temperature: (-70 ~ 25) ℃

High temperature: (60 ~ 180) ℃
Low temperature: (-75 ~ 0) ℃

Temperature: (10 ~ 90) ℃
Humidity: (20 ~ 95) % R.H.

Temperature: (35 ± 2) ℃
Salt concentration: (5 ± 1) % NaCl

Maximum Acceleration: (3.23 ~ 392) m/s²

Frequency: (5 ~ 2 000) Hz
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (10 ~ 200) m/s²

Waveform: Sawtooth waveform
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (49.98 ~ 735) m/s²
Duration: (6 ~ 25) ms		 소재지-8
MIL-STD-810G:2008 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

501.5 High Temperature

502.5 Low Temperature

503.5 Temperature Shock

507.5 Humidity

509.5 Salt Fog

513.6 Acceleration

514.6 Vibration


Category 4 - Truck/trailer/tracked - restrained cargo
Category 5 - Truck/trailer/tracked - loose cargo

516.6 Shock
Procedure I - Functional Shock
Procedure II - Materiel to be packaged
Procedure III - Fragility
Procedure V - Crash hazard		 High possible temperature : (15 ~ 150) ℃

Low possible temperature : (-70 ~ 25) ℃

High temperature : (60 ~ 180) ℃
Low temperature : (-75 ~ 0) ℃

Temperature : (10 ~ 90) ℃
Humidity : (20 ~ 95) % R.H.

Temperature : (35 ± 2) ℃
Salt concentration : (5 ± 1) % NaCl

Maximum Acceleration : (3.23 ~ 392) m/s²

Frequency : (5 ~ 2 000) Hz
Maximum Amplitude : (0.15 ~ 100) mm(p-p)
Maximum Acceleration : (10 ~ 200) m/s²

Wave form : Sawtooth waveform
Maximum Amplitude : (0.15 ~ 100) mm(p-p)
Maximum Acceleration : (49.98 ~ 735) m/s²
Duration : (6 ~ 25) ms		 소재지-8
MIL-STD-810G:(w/Change 1):2014 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

501.6 High Temperature

502.6 Low Temperature

503.6 Temperature Shock

507.6 Humidity

509.6 Salt Fog

513.7 Acceleration

514.7 Vibration


Category 4 - Truck/trailer/tracked - restrained cargo
Category 5 - Truck/trailer/tracked - loose cargo

516.7 Shock
Procedure I - Functional Shock
Procedure II - Materiel to be packaged
Procedure III - Fragility
Procedure V - Crash hazard		 High possible temperature : (15 ~ 150) ℃

Low possible temperature : (-70 ~ 25) ℃

High temperature : (60 ~ 180) ℃
Low temperature : (-75 ~ 0) ℃

Temperature : (10 ~ 90) ℃
Humidity : (20 ~ 95) % R.H.

Temperature : (35 ± 2) ℃
Salt concentration : (5 ± 1) % NaCl

Maximum Acceleration : (3.23 ~ 392) m/s²

Frequency : (5 ~ 2 000) Hz
Maximum Amplitude : (0.15 ~ 100) mm(p-p)
Maximum Acceleration : (10 ~ 200) m/s²

Wave form : Sawtooth waveform
Maximum Amplitude : (0.15 ~ 100) mm(p-p)
Maximum Acceleration : (49.98 ~ 735) m/s²
Duration : (6 ~ 25) ms		 소재지-8
MIL-STD-810H:2019 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS

501.7 High Temperature

502.7 Low Temperature

503.7 Temperature Shock

507.7 Humidity

509.7 Salt Fog

513.8 Acceleration

514.8 Vibration


Category 4 - Truck/trailer/tracked - restrained cargo
Category 5 - Truck/trailer/tracked - loose cargo

516.8 Shock
Procedure I - Functional Shock
Procedure II - Materiel to be packaged
Procedure III - Fragility
Procedure V - Crash hazard		 High possible temperature: (15 ~ 150) ℃

Low possible temperature: (-70 ~ 25) ℃

High temperature: (60 ~ 180) ℃
Low temperature: (-75 ~ 0) ℃

Temperature: (10 ~ 90) ℃
Humidity: (20 ~ 95) % R.H.

Temperature: (35 ± 2) ℃
Salt concentration: (5 ± 1) % NaCl

Maximum Acceleration: (3.23 ~ 392) m/s²

Frequency: (5 ~ 2 000) Hz
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (10 ~ 200) m/s²

Waveform: Sawtooth waveform
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (49.98 ~ 735) m/s²
Duration: (6 ~ 25) ms		 소재지-8
IEC 60068-2-64:2008+AMD1:2019 Environmental testing - Part 2-64 : Tests - Test Fh : Vibration, broad-band random and guidance Frequency: (5 ~ 2 000) Hz
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (10 ~ 200) m/s²		 소재지-8
IEC 60068-2-2:2025 Environmental testing - Part 2-2 : Tests. Tests B : Dry heat Temperature: (30 ~ 155) ℃ 소재지-8
IEC 60068-2-1:2025 Environmental testing - Part 2-1 : Tests. Tests A : Cold Temperature: (-65 ~ 5) ℃ 소재지-8
IEC 60068-2-6:2007 Environmental testing - Part 2-6 : Tests - Test Fc : Vibration (sinusoidal) Frequency: (5 ~ 2 000) Hz
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (10 ~ 200) m/s²		 소재지-8
IEC 60068-2-11:2021 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist Temperature: (35 ± 2) ℃
Concentration of sodium chloride: (50 ± 5) g/L		 소재지-8
IEC 60068-2-14:2023 Environmental testing - Part 2-14 : Tests. Test N : Change of Temperature

9 Test Nc: Rapid change of temperature, two-fluid-bath method		 High Temperature: (60 ~ 180) ℃
Low Temperature: (-75 ~ 0) ℃		 소재지-8
IEC 60068-2-38:2021 Environmental testing - Part 2-38 : Tests. Test Z/AD : Composite Temperature/humidity cyclic test Temperature range: (10 ~ 90) ℃
Humidity range: (20 ~ 95) % R.H.		 소재지-8
RTCA DO-160G:2010 Environmental Conditions and Test Procedures for Airborne Equipment
Section 4 Temperature and Altitude
  4.5.1 Ground Survival Low Temperature Test and Short-Time operating Low temperature Test
  4.5.2 Operating Low Temperature Test
  4.5.3 Ground Survival High Temperature Test and Short-Time operating High temperature Test
  4.5.4 Operating High Temperature Test
  4.5.5 In-Flight Loss of Cooling Test
Section 5 Temperature Variation
Section 6 Humidity
Section 7 Operational shocks and Crash Safety
  7.2 Operational Shock
Section 8 Vibration		 High possible temperature: (15 ~ 150) ℃
Low possible temperature: (-70 ~ 25) ℃
High temperature: (60 ~ 180) ℃
Low temperature: (-75 ~ 0) ℃
Temperature: (25 ~ 65) ℃
Humidity: (50 ~ 95) % R.H.
Waveform: Sawtooth waveform
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (58.8 ~ 196) m/s²
Duration: (11 ~ 20) ms
Maximum Acceleration: (14.7 ~ 196) m/s²
Frequency: (5 ~ 2 000) Hz
Maximum Amplitude: (0.15 ~ 100) mm(p-p)
Maximum Acceleration: (10 ~ 200) m/s²		 소재지-8
▶ 에너지효율
KS C 8561:2024 결정질 실리콘 태양광발전 모듈(성능) 40 A / 500 V 이하 부속시설-1
KS C 8577:2022 건물일체형 태양광 모듈(BIPV)-성능평가 요구사항 40 A / 100 V 이하 부속시설-1
IEC 61730-1:2023 Photovoltaic (PV) module safety qualification-part 1: Requirements for construction 40 A / 100 V or less 부속시설-1
IEC 61730-2:2023 Photovoltaic (PV) module safety qualification-part 2:Requirements for testing 40 A / 100 V or less 부속시설-1
IEC 61215-1:2021 Terrestrial photovoltaic (PV) modules-Design qualification and type approval-Part 1:Test requirements 40 A / 500 V or less 부속시설-1
IEC 61215-1-1:2021 Terrestrial photovoltaic (PV) modules-Design qualification and type approval-Part 1-1:Special requirements for testing of crystalline silicon photovoltaic (PV) modules 40 A / 500 V or less 부속시설-1
IEC 61215-2:2021 Terrestrial photovoltaic (PV) modules-Design qualification and type approval - Part 2:Test procedures 40 A / 500 V or less 부속시설-1
IEC 61701:2020 Photovoltaic (PV) modules - Salt mist corrosion testing 40 A / 500 V or less 부속시설-1
▶ 가정용 전기기기
EN IEC 61851-1:2019 Electric vehicle conductive charging system - Part 1: General requirements

12.4 IP degrees		 AC 770 V or less
DC 2 000 V or less		 부속시설-2
KS R IEC 61851-24:2014 전기자동차 전도성 충전 시스템 - 제24부: 전기자동차 직류 충전 제어용 디지털 통신 AC 770 V 이하
DC 2 000 V 이하		 부속시설-2
IEC 61851-24:2014 Electric vehicle conductive charging system - Part 24; Digital communication between a d.c. EV charging station and ac electric vecicle for control of d.c. chatging AC 770 V or less
DC 2 000 V or less		 부속시설-2
EN IEC 61851-24: 2014 Electric vehicle conductive charging system - Part 24; Digital communication between a d.c. EV charging station and ac electric vecicle for control of d.c. chatging AC 770 V or less
DC 2 000 V or less		 부속시설-2
KS C 8565:2023 태양광 발전용 인버터
(계통연계형, 독립형)
<제외항목>
8.3.3. 감전 보호 시험		 2.4 MW 이하 부속시설-2
EN IEC 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electirc vehicle charging station

101.1.2 IP degrees for ingress of objects		 AC 770 V or less
DC 2 000 V or less		 부속시설-2
KS R IEC 61851-23:2014 전기자동차 전도성 충전 시스템
제23부: 전기자동차 직류 충전 스테이션
<제외항목>
101.1.2 물체 유입에 대한 IP 등급		 AC 770 V 이하
DC 2 000 V 이하		 부속시설-2
IEC 61851-23:2014 Electric vehicle conductive charging system - Part 23: DC electirc vehicle charging station

101.1.2 IP degrees for ingress of objects		 AC 770 V or less
DC 2 000 V or less		 부속시설-2
KC 61851-23:2018 전기차 충전시스템
제23부: 직류 충전 장치
<제외항목>
12.2 물체 침투에 대한 보호 등급		 AC 770 V 이하
DC 2 000 V 이하		 부속시설-2
KS R IEC 61851-1:2017 전기자동차 전도성 충전 시스템
제1부: 일반 요구사항
<제외항목>
12.4 IP 등급		 AC 770 V 이하
DC 2 000 V 이하		 부속시설-2
IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements

12.4 IP degrees		 AC 770 V or less
DC 2 000 V or less		 부속시설-2
KC 61851-1:2022 전기자동차 충전시스템 제1부: 일반 요구사항
<제외항목>
12.4 IP 등급		 AC 770 V 이하
DC 2 000 V 이하		 부속시설-2
KS C IEC 62477-1: 2016 전력전자 컨버터 시스템 및 장비의 안전 요구사항 - 제1부: 일반

<제외항목>
5.2.2.3 IP 시험
5.2.5.2 고전류 아크 점화 시험
5.2.5.3 글로와이어
5.2.5.5 가연성 시험
5.2.5.6 화염 오일 시험
5.2.6.4 진동시험
5.2.6.5 염무시험		 AC (0 ~ 765) V,
DC (0 ~ 1 500) V		 부속시설-2
K 62477-1:2011 전력전자 변환기기 및 시스템(PECS) - 제1부 : 일반

<제외항목>
5.2.2.3 IP 시험
5.2.5.2 고전류 아크 점화 시험
5.2.5.3 글로와이어
5.2.5.5 가연성 시험
5.2.5.6 화염 오일 시험
5.2.6.4 진동시험
5.2.6.5 염무시험		 AC (0 ~ 765) V,
DC (0 ~ 1 500) V		 부속시설-2
▶ 자동차 및 관련제품
Title 49 CFR PART 572 Subpart O:2023 Title 49 - Transportation
Subtitle B - Other Regulations Relating to Transportation
Chapter V - National Highway Traffic Safety Administration
Department of Transportation PART 572 - ANTHROPOMORPHIC TEST DEVICES
Subpart O - Hybrid III 5th Percentile Female Test Dummy, Alpha Version
§ 572.132 Head assembly and test procedure
§ 572.133 Neck assembly and test procedure
§ 572.134 Thorax assembly and test procedure
§ 572.135 Upper and lower torso assemblies and torso flexion test procedure
§ 572.136 Knees and knee impact test procedure		 (Head Drop)
Resultant Acceleration: (500 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 10) %

(Neck Pendulum)
Pendulum Deceleration : (1 ~ 7) m/s
Rotation : (0 ~ 120)°
Moment : (0 ~ 100) N·m
Velocity : (5.95 ~ 7.13) m/s

(Thorax Impact)
Force : (2 380 ~ 4 600) N
Displacement : (0 ~ 60) mm
Velocity : (6.59 ~ 6.82) m/s

(Torso Flexion)
Force : (0 ~ 390) N
Rotation : (0 ~ 45.5)°

(Knee Impact)
Force : (500 ~ 4 100) N
Velocity : (2.07 ~ 2.13) m/s		 부속시설-3
SAE J 826:2021 Devices for Use in Defining and Measuring Vehicle Seating Accommodation (0 ~ 1 000) mm
0° ~ 180°
(0 ~ 60 000) g
(3.0 ~ 3.8) N〮m		 부속시설-3
▶ 에너지효율
기후에너지환경부 고시 제2026-4호
(2026.01.12)		 고효율에너지 기자재 보급 촉진에
관한 규정
별표 1의 10. 항온항습기
별표 1의 22. 공기-물 히트펌프		 6 kW 이상 ~ 35 kW 이하
20 kW 이상 ~ 200 kW 이하		 부속시설-3
기후에너지환경부 고시 제2026-137호(2026.05.27) 효율관리기자재 운용규정
별표1의 4 전기냉방기
별표1의 9 전기냉온수기
별표1의 10 전기밥솥
별표1의 12 선풍기
별표1의 13 공기청정기
별표1의 21 전기냉난방기
별표1의 28 전기스토브
별표1의 30 제습기
별표1의 46 이동식에어컨디셔너		 싱글형 : 정격냉방능력 23 kW 미만 (단일실내유닛)
홈멀티형 : 정격냉방능력 20 kW 미만 (실내유닛 2대,3대 (스탠드형 실내유닛 포함))
멀티형 : 정격냉방능력 20 kW 미만 (실내유닛 2대 이상 (홈멀티 제외))
3 000 W 이하
20 인용 미만
(20 ~41) cm
표준사용면적이 200m² 이하
싱글형 : 정격냉방능력 23 kW 미만 (단일실내유닛)
멀티형 : 정격냉방능력 20 kW 이상 70 kW 미만 (실내유닛 2대 이상)
(500 ~ 10 000) W
1 000 W 이하
23 kW 미만		 부속시설-3
BH GSO ISO 13253:2022 Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
BH GSO ISO 13256-1:2024 Water-Source Heat Pumps - Testing And Rating For Performance - Part 1: Water-To-Air And Brine-To-Air Heat Pumps (500 ~ 320 000) W 부속시설-3
BH GSO ISO 13256-2:2024 Water-Source Heat Pumps - Testing And Rating For Performance - Part 2: Water-To Water And Brine-To Water Heat Pumps (3 000 ~ 200 000) W 부속시설-3
BH GSO ISO 15042:2024+Amd1:2024 Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance (3 000 ~ 320 000) W 부속시설-3
BH GSO ISO 16358-1:2017 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 1: Cooling Seasonal Performance Factor (500 ~ 320 000) W 부속시설-3
BH GSO ISO 16358-2:2017 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 2: Heating Seasonal Performance Factor (500 ~ 320 000) W 부속시설-3
BH GSO ISO 16358-3:2017 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 3: Annual Performance Factor (500 ~ 320 000) W 부속시설-3
BH GSO ISO/TS 16491:2017 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (500 ~ 320 000) W 부속시설-3
BH GSO ISO 5151:2022 Non-Ducted Air Conditioners And Heat Pumps - Testing And Rating For Performance (500 ~ 320 000) W 부속시설-3
OS GSO ISO 13256-1:2024 Water-Source Heat Pumps - Testing And Rating For Performance - Part 1: Water-To-Air And Brine-To-Air Heat Pumps (500 ~ 320 000) W 부속시설-3
OS GSO ISO 13256-2:2024 Water-Source Heat Pumps - Testing And Rating For Performance - Part 2: Water-To-Water And Brine-To-Water Heat Pumps (3 000 ~ 200 000) W 부속시설-3
OS GSO ISO 15042:2024+Amd1:2024 Multiple Split-System Air-Conditioners And Air-To-Air Heat Pumps - Testing And Rating For Performance (3 000 ~ 320 000) W 부속시설-3
OS GSO 1589:2002 Air Ducts For Air Conditions - Part1: Definitions, Classification And Terminology. (500 ~ 320 000) W 부속시설-3
OS GSO ISO 16358-1:2016 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 1: Cooling Seasonal Performance Factor (500 ~ 320 000) W 부속시설-3
OS GSO ISO 16358-2:2016 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 2: Heating Seasonal Performance Factor (500 ~ 320 000) W 부속시설-3
OS GSO ISO 16358-3:2016 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 3: Annual Performance Factor (500 ~ 320 000) W 부속시설-3
OS GSO ISO/TS 16491:2015 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (500 ~ 320 000) W 부속시설-3
OS GSO 2530:2016 Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners (500 ~ 20 000) W 부속시설-3
OS GSO 2531:2016 Saftey And Performance Requirements For Air-Conditioners And Methods Of Test Including MEPS (500 ~ 20 000) W 부속시설-3
QS 2663:2020 ENERGY LABELLING AND MINIMUM ENERGY
PERFORMANCE REQUIREMENTS FOR AIR-CONDITIONERS		 (500 ~ 20 000) W 부속시설-3
GSO ISO/TS 16491:2015 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (500 ~ 320 000) W 부속시설-3
GSO ISO 13253:2021 Ducted Air-Conditioners And Air-To-Air Heat Pumps - Testing And Rating For Performance (500 ~ 320 000) W 부속시설-3
GSO ISO 13256-1:2024 Water-Source Heat Pumps -- Testing And Rating For Performance - Part 1: Water-To-Air And Brine-To-Air Heat Pumps (500 ~ 320 000) W 부속시설-3
GSO ISO 13256-2:2024 Water-Source Heat Pumps -- Testing And Rating For Performance - Part 2: Water-To-Water And Brine-To-Water Heat Pumps (3 000 ~ 200 000) W 부속시설-3
GSO ISO 15042:2024+Amd1:2024 Multiple Split-System Air-Conditioners And Air-To-Air Heat Pumps - Testing And Rating For Performance (3 000 ~ 320 000) W 부속시설-3
GSO 1589:2002 Air Ducts For Air Conditions - Part1: Definitions, Classification And Terminology. (500 ~ 320 000) W 부속시설-3
ISO 16358-2:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 2 : Heating seasonal
performance factor		 (500 ~ 320 000) W 부속시설-3
GB/T 23137-2020 Heat pump water heater for household and similar application (500 ~ 320 000) W 부속시설-3
GB/T 21362-2008 Heat pump water heater for commercial &industrial and similar application (3 000 ~ 320 000) W 부속시설-3
DGNTI COPANIT 509:2017 Energy efficiency in split-type air conditioners with variable refrigerant flow, free discharge and without air ducts. Limits, test methods. (500 ~ 20 000) W 부속시설-3
DGNTI COPANIT 508:2017 Energy efficiency for separated assemblies, free discharge and non-ducted air conditioners. limits and test methods (500 ~ 20 000) W 부속시설-3
DGNTI COPANIT 507:2017 Energy efficiency for room air conditioners. Limits, test methods (500 ~ 20 000) W 부속시설-3
DGNTI COPANIT 506:2017 Energy efficiency of central, package or split type air conditioners. Limits, test methods. (500 ~ 20 000) W 부속시설-3
CAN/CSA 370-13(R2022) Cooling performance of portable air conditioners (500 ~ 20 000) W 부속시설-3
GSO ISO 16358-1:2016 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 1: Cooling Seasonal Performance Factor (500 ~ 320 000) W 부속시설-3
GSO ISO 16358-2:2016 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 2: Heating Seasonal Performance Factor (500 ~ 320 000) W 부속시설-3
GSO ISO 16358-3:2016 Air-Cooled Air Conditioners And Air-To-Air Heat Pumps - Testing And Calculating Methods For Seasonal Performance Factors - Part 3: Annual Performance Factor (500 ~ 320 000) W 부속시설-3
GSO 2530:2016 Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners (500 ~ 20 000) W 부속시설-3
GSO 2531:2016 Saftey And Performance Requirements For Air-Conditioners And Methods Of Test Including MEPS (500 ~ 20 000) W 부속시설-3
GSO ISO 5151:2021 Non-Ducted Air Conditioners And Heat Pumps - Testing And Rating For Performance (500 ~ 320 000) W 부속시설-3
ISO 13253:2017 Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
ISO 13253:2017/Amd1:2020 Ducted air-conditioners and air-to-air heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
ISO 13256-1:2021 Water-Source Heat Pumps - Testing And Rating For Performance - Part 1: Water-To-Air And Brine-To-Air Heat Pumps (500 ~ 320 000) W 부속시설-3
ISO 13256-2:2021 Water-source heat pumps - Testing and rating for performance - Part 2 : Water-to water and brine-to-water heat pumps (3 000 ~ 200 000) W 부속시설-3
ISO 15042:2011 Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance (3 000 ~ 320 000) W 부속시설-3
ISO 15042:2017 Multiple split-system air conditioners and air-to-air heat pumps - Testing and rating for performance (3 000 ~ 320 000) W 부속시설-3
ISO 15042:2017/AMD 1:2020 Multiple split-system air conditioners and air-to-air heat pumps -Testing and rating for performance - Amendment 1 (3 000 ~ 320 000) W 부속시설-3
ISO 16358-1:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 1 : Cooling seasonal performance factor (500 ~ 320 000) W 부속시설-3
ISO 16358-1:2013/Cor 1:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 1 : Cooling seasonal performance factor (500 ~ 320 000) W 부속시설-3
ISO 16358-1:2013/Amd 1:2019 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 1 : Cooling seasonal performance factor (500 ~ 320 000) W 부속시설-3
EN 16147:2017 Heat pumps with electrically
driven compressors - Testing,
performance rating and requirements for marking of domestic hot water units		 (500 ~ 320 000) W 부속시설-3
EN 15218:2013 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements (500 ~ 320 000) W 부속시설-3
AHRI 1230:2023 Standard for Performance rating of Variable Refrigerant Flow(VRF) Multi-Split Air-conditioning and Heat pump equipment (3 000 ~ 320 000) W 부속시설-3
ANSI/AHRI 1300:2013(R2023) Standard for Performance Rating of Commercial Heat Pump Water Heaters (3 000 ~ 320 000) W 부속시설-3
ANSI/AHRI 1301:2013(R2023) Standard for Performance Rating of Commercial Heat Pump Water Heaters (3 000 ~ 320 000) W 부속시설-3
AHRI 210/240-2024 Standard for Performance Rating
of Unitary Air-conditioning & Air-source Heat Pump Equipment		 (500 ~ 320 000) W 부속시설-3
AHRI Standard 340/360:2022 Standard for Performance Rating of Commercial and Industrial Unitary Air-conditioning and Heat Pump Equipment (3 000 ~ 320 000) W 부속시설-3
AHRI Standard 870:2016(R2023) Standard for Performance Rating of Direct Geoexchange Heat Pumps (3 000 ~ 320 000) W 부속시설-3
ANSI/ASHRAE 37-2009(RA2019) Methods of testing for rating Unitary Air - conditioning and heat pump equipment (500 ~ 320 000) W 부속시설-3
AHRI 440:2019(R2024) Performance Rating of Fan-coil Units (500 ~ 320 000) W 부속시설-3
ANSI/ASHARE 16-2016 Method of Testing for Rating
Room Air Conditioners, Packaged Terminal Air Conditioners, and Packaged Terminal Heat Pumps for Cooling and Heating Capacity		 (500 ~ 320 000) W 부속시설-3
ANSI/ASHRAE Standard 128-2018 Methods Of Rating Portable Air Conditioners (500 ~ 20 000) W 부속시설-3
ANSI/AHAM PAC-1-2015 Portable Air Conditioners (500 ~ 20 000) W 부속시설-3
EN 14511-1:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions (500 ~ 320 000) W 부속시설-3
EN 14511-1:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions (500 ~ 320 000) W 부속시설-3
EN 14511-2:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions (500 ~ 320 000) W 부속시설-3
EN 14511-2:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 2: Test conditions (500 ~ 320 000) W 부속시설-3
EN 14511-3:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods (500 ~ 320 000) W 부속시설-3
EN 14511-3:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 3: Test methods (500 ~ 320 000) W 부속시설-3
EN 14511-4:2022 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements (500 ~ 320 000) W 부속시설-3
EN 14511-4:2018 Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 4: Requirements (500 ~ 320 000) W 부속시설-3
EN 14825:2022 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling, commercial and process cooling. Testing and rating at part load conditions and calculation of seasonal performance (500 ~ 320 000) W 부속시설-3
EN 14825:2018 Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling, commercial and process cooling. Testing and rating at part load conditions and calculation of seasonal performance (500 ~ 320 000) W 부속시설-3
EN 15218:2022 Air conditioners and liquid chilling packages with evaporatively cooled condenser and with electrically driven compressors for space cooling. Terms, definitions, test conditions, test methods and requirements (500 ~ 320 000) W 부속시설-3
ISO 16358-2:2013/Cor 1:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 2 : Heating seasonal
performance factor		 (500 ~ 320 000) W 부속시설-3
KS B 8294:2023 물-공기 지열원 멀티형 열펌프 유닛 (500 ~ 320 000) W 부속시설-3
KS B 8293:2023 물-공기 지열원 열펌프 유닛 (500 ~ 320 000) W 부속시설-3
KS B 8292:2023 물-물 지열원 열펌프 유닛 (3 000 ~ 200 000) W 부속시설-3
KS B 6377:2009 팬 코일 유닛 (500 ~ 320 000) W 부속시설-3
KS B 6311:2022 송풍기의 시험방법 48 000 m³/h 이하 부속시설-3
KS B 6275:2018 워터 칠링 유닛 (500 ~ 320 000) W 부속시설-3
KS 2463:2019 Non-ducted air conditioners - Testing and rating performance (500 ~ 320 000) W 부속시설-3
Jordanian Technical Regulation 2108:2013 Energy efficiency labeling of air conditioners (500 ~ 320 000) W 부속시설-3
Jordanian Technical Regulation 2107:2013 Technical Regulation on eco-design requirements for Air Conditioners and Comfort Fans (500 ~ 320 000) W 부속시설-3
JIS C 9612:2013 Room air conditioner (500 ~ 320 000) W 부속시설-3
JIS C 9220:2018 Residential heat pump water heaters (500 ~ 320 000) W 부속시설-3
ISO 18326:2018/Amd1:2021 Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
ISO 18326:2018 Non-ducted portable air-cooled air conditioners and air-to-air heat pumps having a single exhaust duct - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests (500 ~ 320 000) W 부속시설-3
ISO 5151:2017/Amd1:2020 Non-ducted air conditioners and heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
ISO 5151:2017 Non-ducted air conditioners and heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
ISO 5151:2010 Non-ducted air conditioners and heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
KS B ISO 15042:2017 멀티 에어컨디셔너 및 공기 대 공기 열펌프 - 성능 시험 및 평가 (3 000 ~ 320 000) W 부속시설-3
KS C 9301:2019 선풍기 및 천장 선풍기
12. 시험방법
12.6 온도 상승 시험
12.7 절연 성능 시험
12.17 풍량 시험		 (20 ~ 41) cm 부속시설-3
KS C 9306:2017 에어컨컨디셔너
6.성능
(제외) 6.22 전기 자기 적합성 성능
9. 시험
(제외) 9.2 구조 시험, 재료 시험
(제외) 9.20 전기 자기 적합성 시험		 (500 ~ 320 000) W 부속시설-3
UAE.S 5010-5:2019 Labeling - Energy Efficiency Label for Electrical Appliances - Part five: Commercial and Central Air Conditioners (3 000 ~ 320 000) W 부속시설-3
UAE.S 5010-1:2019 Labeling - Energy Efficiency Label for Electrical Appliances- Part 1: household air conditioners 500 ~ 200 000) W 부속시설-3
TCVN 7831:2012 Non-Ducted air conditioner- Method for determination of energy efficiency (500 ~ 20 000) W 부속시설-3
TCVN 7830:2021 Non-ducted air conditioners - Energy efficiency (500 ~ 20 000) W 부속시설-3
SASO 2874:2016 Commercial Air Conditioners - Minimum Energy Performance Requirements and Testing Requirements (3 000 ~ 320 000) W 부속시설-3
SASO 2763:2008 Safety and performance requirements for Window air conditioners and their method of test (500 ~ 20 000) W 부속시설-3
SASO 2682:2013 Ducted air-conditioners and air-to-air heat pumps-testing and rating for performance (500 ~ 320 000) W 부속시설-3
SASO 2681:2013 Non-ducted air conditioners and heat pumps - testing and rating for performance (500 ~ 320 000) W 부속시설-3
SASO 2663:2021/AMD 1: 2023 Air Conditioners - Minimum Energy Performance, Labelling and Testing Requirements for Low Capacity Window and Single-Split Types (500 ~ 20 000) W 부속시설-3
SASO 2663:2021 Air Conditioners - Minimum Energy Performance, Labelling and Testing Requirements for Low Capacity Window and Single-Split Types (500 ~ 20 000) W 부속시설-3
SANS 54511-3:2016
(Ed 2.00)		 Air conditioners liquid chilling packages and heat pumps With electrically driven compressors for space heating and cooling Part 3: Test methods (500 ~ 320 000) W 부속시설-3
RTE INEN 072:2012 Energy efficiency for non-ducted air conditioners (500 ~ 20 000) W 부속시설-3
NTE INEN 2495:2012 Energy efficiency of non-ducted air conditioners. Requirements (500 ~ 20 000) W 부속시설-3
NOM-026-ENER-2015 Energy efficiency in split-type(Inverter) air conditioners with variable refrigerant flow, free download and without air ducts. Limits, test methods and labelling (500 ~ 20 000) W 부속시설-3
NOM-011-ENER-2006 Energy efficiency of central, package or split type air conditioners. Limits, test methods and labeling (500 ~ 20 000) W 부속시설-3
MS ISO 5151:2012 Non-ducted air conditioners and heat pumps - testing and rating for performance (500 ~ 320 000) W 부속시설-3
KS C 9317:2013 전기제습기
6. 성능
(제외) 6.4 온도
(제외) 6.11 전자파 장해
9. 시험
(제외) 9.2 구조 시험
(제외) 9.13 전자파 장해 시험		 Input Power : Max . 500 W 부속시설-3
ISO 16358-3:2013 Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Part 3 : Annual performance
factor		 (500 ~ 320 000) W 부속시설-3
▶ 산업용 전기기기
IEC 60255-1:2022 Measuring Relays and Protection Equipment Part 1 : Common requirements 0.9 ~ 1 A, >= 5 ~ 30 A,
500 V ± 10 %, 500 V d.c.,
12 V r.ms. ac or 12 V d.c.,
30 mV ~ 230 V, 0.1 Ω or less,
10 MΩ or more,100 MΩ or more,
>= 30 ~ 1 000 W at L/R = 40 ms,
-40 ℃ ~ 70 ℃/ ±3 ℃/
1 ℃ ± 0.2 ℃/min,
93 ± 3 %,
60 % ± 10 %,
97 %, -2 % +3 %,
45 ~ 75 % RH,
86 ~ 106 kPa,
50 Hz or 60 Hz±0.2 %		 소재지-1
IEC 60255-27:2023 Measuring Relays and Protection Equipment Part 27 : Product safety requirements 0.9 ~ 1 A, >= 5 ~ 30 A,
500 V ±10 %, 500 V d.c.,
12 V r.ms. ac or 12 V d.c.,
30 mV ~ 230 V, 0.1 Ω or less,
10 MΩ or more,100 MΩ or more,
>= 30 ~ 1 000 W at L/R = 40 ms,
-40 ℃ ~ 70 ℃/ ±3 ℃/
1 ℃ ± 0.2 ℃/min,
93 ± 3 %,
60 % ± 10 %,
97 %, -2 % +3 %,
45 ~ 75 % RH,
86 ~ 106 kPa,
50 Hz or 60 Hz ±0.2 %		 소재지-1
▶ 전자기적합성
KS C 9547:2023 일반 조명기기 - 전자파적합성(EMC) 내성 요구사항 ESD : ±15 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 16 A per phase or less		 소재지-1
EN IEC 61547:2023 Equipment for general lighting purposes - EMC immunity requirements ESD : ±15 kV
RS : 80 MHz ~ 1 GHz
EFT : ±1 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz
M/F : 3 A/m
V-DIP : 16 A per phase or less		 소재지-1
IEC 61000-3-2:2018+AMD1:2020+AMD2:2024 Electromagnetic compatibility (EMC)
- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)		 16 A or less
40th harmonic		 소재지-1
IEC 61000-4-6:2023 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances induced by radio-frequency fields Frequency range : 150 kHz ~ 80 MHz
Voltage : Max. 10 Vrms		 소재지-1
CISPR 11:2024 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

6.3.2.3 Table 14 radiation disturbance limits(distance 30 m)		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
CISPR 15:2018+AMD1:2024 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m
and 4 m)		 RE : 9 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
MFE : 9 kHz ~ 30 MHz		 소재지-1
EN 301 489-17 V3.3.1(2024-09) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility		 CE : 150 kHz ~ 30
MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80
MHz, 3 V
V-DIP : ≤ 75 A
H/F : ≤ 75 A
TI : -600 V ~ 300 V		 소재지-1
EN 301 489-3 V2.3.2(2023-01) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard for ElectroMagnetic Compatibility		 CE : 150 kHz ~ 30
MHz
RE : 30 MHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80
MHz, 3 V
V-DIP : ≤ 75 A
H/F : ≤ 75 A
TI : -600 V ~ 300 V		 소재지-1
▶ 가정용 전기기기
IEC 60335-2-40:2024 Household and similar electrical appliances - Safety - Part 2-40 : Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-34:2024 Household and similar electrical appliances - Safety - Part 2-34 : Particular requirements for motor-compressors Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-6:2024 Household and similar electrical appliances - Safety - Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
▶ 조명기기
KS C IEC 62629-62-11:2023 3D 디스플레이 기기 - 제62-11부: 가상 영상에 대한 측정방법 - 광학 9.3 가상 영상 평면의 균일도 측정 소재지-1
SPS-C-EDIRAK 0004-7385:2019 자동차용 헤드업 디스플레이 광학 성능 측정방법 5.1 헤드업 디스플레이 주시 방향
5.2 필드오브뷰		 소재지-1
IEC 63356-1:2023 LED light source characteristics - Part 1: Datasheets AC 600 V or less
DC 300 V or less
Dimension : 2 500 mm or less		 소재지-1
IEC 63356-2:2024 LED light source characteristics - Part 2: Design parameters and values Dimension : 1 500 mm or less 소재지-1
IEC 62471-7:2023 Photobiological safety of lamps and lamp systems - Part 7: Light sources and luminaires primarily emitting visible radiation Spectrum range : (250 ~ 1 100) nm 소재지-1
▶ 산업용 기계
KS B ISO 18646-1:2016 로봇-서비스 로봇의 성능 기준 및 관련 시험방법-제1부 : 바퀴형 로봇의 이동
5 정격 속도
6 정지 특성
10 선회 폭		 속도 : 5 m/s 이하
거리 : 5 m 이하
시간 : 60 s 이하
선회 폭 : 5 m 이하		 소재지-2
KS B ISO 18646-2:2024 로봇-서비스 로봇의 성능 기준 및 관련 시험방법-제2부 : 주행
5 자세 특성
6 장애물 감지
7 장애물 회피
9 협로 통과		 거리 : 45 m 이하
각도 : -180° ~180°
감지 정확도 : (0 ~ 100) %
장애물 유형: 벽, 탁자, 대형 원통, 소형 원통
협로 너비 : 4 m 이하		 소재지-2
▶ 유/무선 통신기기
ETSI EN 301 908-25:2024 IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 25: New Radio (NR) User Equipment (UE) Release 15		 FR1: (410 ~ 7 125) MHz,
FR2: (24 250 ~ 43 500) MHz		 소재지-2
▶ 전자기적합성
EN IEC 61326-2-2:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2 : Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
EN IEC 61326-2-3:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers With integrated or remote signal conditioning RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
EN IEC 61326-2-4:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-4 : Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9		 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
EN IEC 61326-2-5:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5 : Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1 RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
EN IEC 61326-2-6:2021 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : Particular requirements - In vitro diagnostic(IVD) medical equipment RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
IEC 60255-26:2023 Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements RE : 30  MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
Surge : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
Low CS : 0 kHz ~ 150 kHz
MFS : 1 000 A/m
V-DIP : ≤75 A
DOW : ±2.5 kV		 소재지-2
IEC 61326-2-3:2020 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3 : Particular requirements - Test configurations, operational conditions and performance criteria for transducers With integrated or remote signal conditioning RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
IEC 61326-2-6:2025 Electrical equipment for measurement control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 28 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤16 A per phase		 소재지-2
CISPR 15:2018+AMD1:2024 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

4.5.2 Table 8 - Radiated disturbance limits in the frequency range 9 kHz to 30 MHz (loop diameter : 3 m and 4 m)		 CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
MFE : 9 kHz ~ 30 MHz		 소재지-2
KS C 3369:2022 가전기기 및 유사 기기의 자기장 측정방법 Frequency range : 10 Hz ~ 400 kHz 소재지-2
ASTM D5568-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide Frequency range : 100 MHz - 40 GHz 소재지-2
ASTM D7449/D7449M-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line Frequency range : 1 GHz - 20 GHz 소재지-2
ASTM F3057-21 Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings Frequency range : 100 kHz - 20 GHz 소재지-2
▶ 자동차 및 관련제품
E/ECE/324/Rev.2/Add.126/Rev.2-E/ECE/TRANS/505/Rev.2/Add.126/Rev.2 Uniform provisions concerning the approval of motor vehicles with regard to their pedestrian safety performance Annex 6 Certification of the impactor

Head Drop
Resultant Acceleration : (1 000 ~ 3 000) m/s²

Static certification tests
Displacement : (0 ~ 35) mm
Force : (0 ~ 20) kN
Moment : (0 ~ 480) N·m

Dynamic certification pendulum tests
Displacement : (0 ~ 35) mm
Moment : (0 ~ 400) N·m
Velocity : (0 ~ 11) m/s

Dynamic certification inverse tests
Displacement : (0 ~ 35) mm
Moment : (0 ~ 400) N·m
Velocity : (0 ~ 11.1) m/s		 부속시설-3
ISO/TS 20458:2023 Road vehicles - Design and performance specifications for advanced Pedestrian Legform Impactor(aPLI) 6 Certfication test procedure

Hip-joint certification tests
Rotation : (0 ~ 30)°
Moment : (0 ~ 400) N·m

Lower Limb certification tests
Displacement : (0 ~ 35) mm
Force : (0 ~ 20) kN
Moment : (0 ~ 480) N·m

Full assembly certification tests
Displacement : (0 ~ 35) mm
Moment : (0 ~ 400) N·m
Velocity : (0 ~ 11.1) m/s		 부속시설-3
ISO 15830-2:2022 Road vehicles-Design and performance specifications for the WorldSID 50th percentile male side-impact dummy-Part2:Mechanical subsystems (Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Moment : (0 ~ 130) N·m
Velocity : (0 ~ 7.13) m/s

(Full body tests)
Force : (0 ~ 8 200) N
Displacement : (0 ~ 76) mm
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²		 부속시설-3
047-9900:2017 Q0 (6 week old, Newborn) User Manual Section 5. Certification and Calibration

(Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Velocity : (0 ~ 7.13) m/s		 부속시설-3
036-9900:2022 Q1 (Advanced 1 year old child) User Manual 8 Certification Tests

(Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Moment : (0 ~ 130) N·m
Velocity : (0 ~ 7.13) m/s

(Lumbar Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Velocity : (0 ~ 7.13) m/s

(Thorax Impact)
Force : (0 ~ 1 000) N
Displacement : (0 ~ 50) mm
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²		 부속시설-3
048-9900:2022 Q1.5 (Advanced 1.5 year old child) User Manual 8 Certification Tests

(Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Moment : (0 ~ 130) N·m
Velocity : (0 ~ 7.13) m/s

(Lumbar Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Velocity : (0 ~ 7.13) m/s

(Thorax Impact)
Force : (0 ~ 1 000) N
Displacement : (0 ~ 50) mm
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²		 부속시설-3
020-9905:2022 Q3 (Advanced 3-year-old child) User Manual 8. Certification Tests

(Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Moment : (0 ~ 130) N·m
Velocity : (0 ~ 7.13) m/s

(Lumbar Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Velocity : (0 ~ 7.13) m/s

(Thorax Impact)
Force : (0 ~ 1 600) N
Displacement : (0 ~ 50) mm
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²		 부속시설-3
033-9900:2022 Q6 (Advanced 6 year old child) User Manual 8. Certification Tests

(Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Moment : (0 ~ 130) N·m
Velocity : (0 ~ 7.13) m/s

(Lumbar Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Velocity : (0 ~ 7.13) m/s

(Thorax Impact)
Force : (0 ~ 1 500) N
Displacement : (0 ~ 50) mm
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²		 부속시설-3
010-9900:2022 Q10 (10.5 year old child) User Manual Section 13. Certfication Procedures

(Head Drop)
Resultant Acceleration : (1 000 ~ 3 000) m/s²
Lateral Acceleration : (0 ± 150) m/s²
Unimodal Oscillation : (0 ~ 17) %

(Neck Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Moment : (0 ~ 130) N·m
Velocity : (0 ~ 7.13) m/s

(Lumbar Pendulum)
Pendulum Deceleration : (10 ~ 300) m/s²
Rotation : (0 ~ 120)°
Velocity : (0 ~ 7.13) m/s

(Thorax Impact)
Force : (0 ~ 2 000) N
Displacement : (0 ~ 50) mm
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²

(Shoulder Impact)
Force : (0 ~ 3 000) N
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²

(Pelvis Impact)
Force : (0 ~ 5 000) N
Velocity : (2.94 ~ 6.82) m/s
Acceleration : (10 ± 700) m/s²		 부속시설-3
▶ 수질
KS I 3203:2021 고순도 물 중의 금속원소 측정을 위한 시험 방법 항목: Cr, Co, Ni, Cd
범위:
Cr: 10 ~ 3 000 ng/L
Co: 10 ~ 3 000 ng/L
Ni: 80 ~ 3 000 ng/L
Cd: 10 ~ 3 000 ng/L		 소재지-1
▶ 산업용 전기기기
UL 121201 : 2017 (9th Edition) STANDARD FOR SAFETY : Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations 1 000 V 이하, 1 000 A 이하
표면온도: (-60 ~ +500) ℃		 소재지-1
UL 1203 : 2013 (5th Edition) STANDARD FOR SAFETY : Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations
<현장시험>
20 Temperature Test
22 Hydrostatic Pressure Test
25.2 Impact test
28 Electrical-Resistance Test
32 Drop Test
66 Enclosure Thickness
86 Hydrostatic Pressure Test
123 Normal Temperature Test
150 Impact Tests		 1 000 V 이하, 1 000 A 이하
최대과압: 25 MPa
표면온도: (-60 ~ +500) ℃
<현장시험>
최대과압: 25 MPa
표면온도: (-60 ~ +500) ℃		 소재지-1
▶ 전자기적합성
IEC 61967-1:2018 Integrated circuits - Measurement of electromagnetic emissions - Part 1: General conditions and definitions Frequency range : 150 kHz ~ 3 GHz 소재지-1
IEC 61967-2:2005 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions - TEM cell and wideband TEM cell method Frequency range : 150 kHz ~ 1 GHz 소재지-1
IEC 61967-4:2021 Integrated circuits - Measurement of electromagnetic emissions - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method Frequency range : 150 kHz ~ 1 GHz 소재지-1
KS C IEC 61967-4:2002 집적회로 - 150 kHz에서 1 GHz까지의 전기자기적 방출 측정 - 제4부: 수행된 방출 측정 - 1 Ω/150 Ω 직접결합방법 Frequency range : 150 kHz ~ 1 GHz 소재지-1
IEC 62132-1:2015 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions Frequency range : 150 kHz ~ 3 GHz 소재지-1
IEC 62132-2:2010 Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method Frequency range : 150 kHz ~ 1 GHz 소재지-1
IEC 62132-4:2006 Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method Frequency range : 150 kHz ~ 1 GHz
Test level : max. 5 W		 소재지-1
▶ 소프트웨어
KS X IEC 62443-2-4:2015 산업제어시스템 보안 - 제2-4부: IACS 서비스 공급자 보안 프로그램 요구사항 - 소재지-1
KS X IEC 62443-3-3:2013 산업 통신 네트워크 - 네트워크 및 시스템 보안 - 제3-3부: 시스템 보안 요구사항 및 보안 등급 - 소재지-1
KS X IEC 62443-4-1:2018 산업제어시스템 보안 - 제4-1부: 안전한 제품 개발 생명주기 요구사항 - 소재지-1
IEC TS 62443-6-1:2024 Security for industrial automation and control systems - Part 6-1: Security evaluation methodology for IEC 62443-2-4 - 소재지-1
IEC TS 62443-6-2:2025 Security for industrial automation and control systems - Part 6-2: Security evaluation methodology for IEC 62443-4-2 - 소재지-1
EN 18031-1:2024 Common security requirements for radio equipment - Part 1: Internet connected radio equipment - 소재지-1
EN 18031-2:2024 Common security requirements for radio equipment - Part 2: Radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment - 소재지-1
EN 18031-3:2024 Common security requirements for radio equipment - Part 3: Internet connected radio equipment processing virtual money or monetary value - 소재지-1
ISO/IEC TS 4213:2022 Information technology - Artificial intelligence - Assessment of machine learning classification performance - 소재지-1
▶ 에너지효율
IEC 60705:2010/AMD1:2014 Household microwave ovens - Methods for measuring performance

- 7. Dimensioms and volume
- 10. Technical tests for performance
- 11. Heating performance
- 12. Cooking performance
- 13. Defrosting performance
- 14. Energy consumption for the microwave function
- 15. Consumption measurment of low power modes
- Annex A Regional defrosting tests
- Annex B Dishes for Clause 12 and 13
- Annex E Data and calculation sheet: for a cooking cycle with microwave function
- Annex F Energt consumption for the cooling diwn period		 Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지-1
ENERGY STAR Program Requirements for Electric Vehicle Supply Equipment Eligibility Criteria Version 1.2:2023 ENERGY STAR Program Requirements for Electric Vehicle Supply Equipment Eligibility Criteria Version 1.2:2023 AC 600 V이하, 50/60 Hz 소재지-1
▶ 자동차 및 관련제품
ISO/TS 17242:2014 Quasi-static calibration procedure for belt force transducers (0 ~ 20 000) N 소재지-2
DKD-R 3-9 Continuous calibrations of force transducers according to the comparison method (0 ~ 25 000) N 소재지-2
SAE J 826:2021 Devices for Use in Defining and Measuring Vehicle Seating Accommodation (0 ~ 1 000) mm
0° ~ 180°
(0 ~ 150) kg
(3.0 ~ 3.8) N〮m		 소재지-2
▶ 전기재료 및 부품
국토교통부고시 제2026-257호(2026.06.05.) 자동차 및 자동차 부품의 성능과 기준 시행세칙
[별표1] 제 48호, 제 48호의 2		 Max. Voltage : DC 1 200 V
Max. Current : DC 800 A		 소재지-3
▶ 유/무선 통신기기
EN 301 908-13:2024 IMT cellular networks;
Harmonised Standard for access to radio spectrum;
Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)

LTE Category : NB1, M1		 9 kHz ~ 18 GHz 소재지-2
▶ 가정용 전기기기
NMX-I-60065-NYCE-2015 Audio Video and similar electronic apparatus - Safety requirements Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NOM-001-SCFI-2018 Electronic devices - Safety requirements and test methods Audio/Video devices including TVs 소재지-1
NMX-I-60950-1-NYCE-2015 Information technology equipment - safety - Part 1: General requirements Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
NOM-019-SCFI-2016 Information technology equipment and associated equipment, as well as office equipment - Safety requirements Information technology equipment and associated equipment, office equipment  소재지-1
▶ 에너지효율
NOM-032-ENER-2013 MAXIMUM ELECTRICAL POWER LIMITS FOR
STANDBY POWER DEMANDING EQUIPMENT AND APPLIANCES. TEST AND LABELING METHODS.		 100 W or less 소재지-1
NMX-J-551-ANCE-2012 Household electrical appliances - Measurement of standby power 100 W or less 소재지-1
▶ 가정용 전기기기
NMX-J-521/1-ANCE-2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 1 : GENERAL REQUIREMENTS Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521-2-2-ANCE-2019 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-2: PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND WATER - SUCTION CLEANING APPLIANCES Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521/2-7-ANCE-2016 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-7 : PARTICULAR REQUIREMENTS FOR WASHING MACHINES Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521/2-24-ANCE-2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SEGURIDAD - PART 2-24:
PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS		 Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521/2-40-ANCE-2014 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2 - 40: PARTICULAR REQUIREMENTS FOR HEAT PUMPS, AIR CONDITIONERS AND DEHUMIDIFIERS Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521/2-65-ANCE-2009 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2 - 65:
PARTICULAR REQUIREMENTS FOR AIR-CLEANING APPLIANCES		 Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-I-60335-2-25-NYCE-2015 ELECTRONIC EQUIPMENT-MICROWAVE OVENS - SAFETY REQUIREMENTS Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NOM-003-SCFI-2014 Electrical Producs - Safety Specifications electrical product 소재지-1
▶ 에너지효율
IRAM 2141-3:2017 Lavarropas Electricos Parte 3 - Etiquetado de eficiencia energetica Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
▶ 산업용 전기기기
IEC 60079-18:2025 Explosive atmospheres - Part 18 : Equipment protection by encapsulation “m”

8.2.4 Dielectric strength test		 Max. 15 000 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +500) ℃

Max. 15 600 V		 소재지-1
▶ 가정용 전기기기
NMX-J-521/2-11-ANCE-2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-11: PARTICULAR REQUIREMENTS FOR TUMBLE DRYERS Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521-2-14-ANCE-2020 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-14: PARTICULAR REQUIREMENTS FOR KITCHEN MACHINES Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NMX-J-521/2-15-ANCE-2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-15: PARTICULAR
REQUIREMENTS FOR APPLIANCES FOR HEATING LIQUIDS		 Input: (3 ~ 450) V, 50 A
Temperature: 200 ℃
Humidity: 25 ℃, 95 % R.H.
Electric strength: 5 kV
Leakage current: 50 mA		 소재지-1
NTC-IEC 61851-23 : 2021 Sistema conductivo de carga para vehículos eléctricos. Parte 23: Estación de carga en corriente continua para vehículos eléctricos. 입력 : 600 V 이하 소재지-1
NTC-IEC 62196-1:2021 Tomacorrientes, clavijas, conectores de vehículo y entradas de vehículo. Carga conductiva de vehículos eléctricos. Parte 1: Requisitos generales AC 690 V, 250 A
DC 1 500 V, 400 A		 소재지-1
NTC-IEC 62196-2 : 2021 Tomacorrientes, clavijas, conectores de vehículo y entradas de vehículo. Carga conductiva de vehículos eléctricos. Parte 2: Compatibilidad dimensional y requisitos de intercambiabilidad para los accesorios de espigas y alvéolos en corriente alterna AC 480 V 이하
삼상 63 A 이하
단상 70 A 이하		 소재지-1
▶ 전자기적합성
KS C 9040-2:2025 무정전전원장치(UPS)－제2부：전자파적합성(EMC) 요구사항 전도성 방해 : 150 kHz ~ 30 MHz
방사성 방해 : 30 MHz ~ 1 GHz
정전기 방전 : ±8 kV
방사성 RF 전자기장 : 80 MHz ~ 1 GHz
전기적 빠른 과도현상 : ±2 kV
서지 : ±2 kV
전도성 RF 전자기장 : 150 kHz ~ 80 MHz
전원주파수 자기장 : 30 A/m		 소재지-1
SANS 60601-1-2:2022 Medical electrical equipment Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 16 A per phase or less
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-1
▶ 에너지효율
IRAM 62301:2012 Measurements and labelling of standby power for electrical appliances 100 W 이하 소재지-1
IRAM 62411:2023 Energy efficiency labelling of televisions receivers in on-mode (0 ~ 2 200) W 소재지-1
IRAM 2404-3:2015+M1:2016 Energy efficiency labelling of household refrigerating appliances - Part 3 - Label 10 kW 이하 소재지-1
KS C IEC 62552-1:2020 가정용 냉장기기 - 특성 및 시험방법 - 제1부: 일반 요구사항 10 kW 이하 소재지-1
KS C IEC 62552-2:2020 가정용 냉장기기 - 특성 및 시험방법 - 제2부: 성능 요구사항 10 kW 이하 소재지-1
KS C IEC 62552-3:2020 가정용 냉장기기 - 특성 및 시험방법 - 제3부: 에너지 소비량과 용량 10 kW 이하 소재지-1
EN 62552-1:2020 Household refrigerating appliances - Characteristics and test methods - Part 1 : General requirements 10 kW 이하 소재지-1
EN 62552-2:2020 Household refrigerating appliances - Characteristics and test methods - Part 2 : Performance requirements 10 kW 이하 소재지-1
EN 62552-3:2020 Household refrigerating appliances - Characteristics and test methods - Part 3 : Energy consumption and volume 10 kW 이하 소재지-1
NOM-015-ENER-2018 Energy efficiency of household refrigerators and freezers. Limits, Test Methods, and Labeling (0 ~ 600) V
(0 ~ 20) A		 소재지-1
IEC 62885-2:2021 Surface cleaning appliances - Part 2: Dry vacuum cleaners for household or similar use - Methods for measuring the performance Suction power : (0 ~500) W 소재지-1
▶ 환경 및 신뢰성
산업통상자원부 고시 제2020-230호(2020.12.28) 전력량계 기술기준
5.2.1 내충격성
5.2.2 내진동성
8.3.2 내열성
8.3.3 내한성
8.3.4 온습도사이클
8.3.5 태양열복사		 최고가능온도: 200 ℃
최저가능온도: -60 ℃
온도 : (10 ~ 55) ℃
습도 : (20 ~ 98) % R.H.
온도 : (-45 ~ 180) ℃
최대태양광 : 1 120 W/m²
주파수: (10 ~ 150) Hz
진폭: 0.075 mm
가속도: 9.8 m/s²
충격파형 : 반정현파
최대 충격가속도 : 300 m/s²
펄스지속시간 : 18 ms		 소재지-2
▶ 가정용 전기기기
NTC-IEC 61851-1 : 2021 Sistema conductivo de carga para vehículos eléctricos. Parte 1: Requisitos generales
12.4 IP degrees		 AC : below 770 V, DC : below 2 000 V 소재지-3
NTC-IEC 61851-1 : 2021 Sistema conductivo de carga para vehículos eléctricos. Parte 1: Requisitos generales

12.4 IP degrees		 AC : below 770 V, DC : below 2 000 V 부속시설-2
NTC-IEC 61851-23 : 2021 Sistema conductivo de carga para vehículos eléctricos. Parte 23: Estación de carga en corriente continua para vehículos eléctricos.
101.1.2 IP degrees		 AC : below 770 V, DC : below 2 000 V 소재지-3
NTC-IEC 61851-23 : 2021 Sistema conductivo de carga para vehículos eléctricos. Parte 23: Estación de carga en corriente continua para vehículos eléctricos.

101.1.2 IP degrees		 AC : below 770 V, DC : below 2 000 V 부속시설-2
▶ 에너지효율
IRAM 62406 : 2019 Etiquetado de eficiencia energética para acondicionadores de aire (500 ~ 32 000) W 부속시설-3
IEC 62301:2005 Household electrical appliances - Measurement of standby power 100 W or less 소재지-1
▶ 계측기기
산업통상자원부 고시 제2025-149호(2025.08.29.) 전력량계 기술기준

<제외항목>
5.2 기계적 강도 시험
8.3 기후 영향 시험
9.2 전자기적 적합성
12.5 열과 불의 내력
12.6 먼지, 물의 침투에 대한 보호성
13.1 습윤, 아황산가스의 영향
13.4 옥외 폭로의 영향		 AC 380 V, DC 1 500 V 이하 소재지-2
▶ 전자기적합성
ISO 4358:2023 Test methods for civil multi-copter
unmanned aircraft system
5.8.3.3 Electrostatic discharge immunity		 Max. ±15 kV 소재지-5
▶ 전선, 케이블, 전로용품
KC 60799:2015 전기용 부속품 - 코드 셋 및 상호연결 코드셋 AC 1 000 V 이하 소재지
▶ 전기재료 및 부품
KC 60884-1:2015 가정용 및 이와 유사한 용도의 플러그와 콘센트 - 제 1부 : 일반요구사항 AC 250 V 이하, 16 A 이하 소재지
▶ 가정용 전기기기
K 60335-2-9:2013 가정용 및 이와 유사한 전기기기의 안전성 - 제2-9부 : 그릴, 토스터기 및 이와 유사한 휴대용  조리 기기의 개별요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
K 10020:2010 가정용 및 이와 유사한 전기기기의 안전성 - 전기찜질기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
IEC 60335-2-24:2020 Household and similar electrical appliances - Safety
- Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-34:2016 Household and simila relectrical appliances - Safety
- Part 2-34 : Particular requirements for motor-compressors		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
KC 60335-2-4:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-4부 : 전기탈수기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-5:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-5부 : 전기 식기세척기의 대한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-14:2016 가정용 및 이와 유사한 전기기기의 안전성 - 제2-14부 : 주방기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-75:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-75부 : 상업용 디스펜싱기기 및 자동판매기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-101:2015 가정용 및 이와 유사한 전기기기의 안전성 - 제2-101부 : 전기 훈증기에 관한 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
▶ 전기재료 및 부품
KC 60884-2-2:2025 가정용 및 이와 유사한 용도의 플러그와 콘센트 - 제2-2부 : 기기용 콘센트의 개별 요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-3:2025 가정용 및 이와 유사한 용도의 플러그와 콘센트, 제2-3부 : 고정배선용 인터록이 없는 스위치형 콘센트의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-5:2025 가정용 및 이와 유사한 용도의 플러그 및 콘센트 - 제 2-5부 : 어댑터의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 60884-2-6:2025 가정용 및 이와 유사한 용도의 플러그 및 콘센트 - 제 2-6부 : 고정배선용 인터록 스위치형 콘센트의 개별요구사항 AC 250 V 이하, 16 A 이하 소재지
KC 62133-2:2025 휴대기기용 밀폐 리튬이차전지 안전 Max. DC 100 V
Max. DC 100 A
Temperature range : (-40 ~ 160) ℃		 소재지-1
▶ 가정용 전기기기
KC 62368-1:2025 오디오/비디오 및 정보통신기술기기 - 제1부 : 안전요구사항
<제외항목>
10.6.6 청취기기에 대한 요구 사항		 AC/DC 600 V 이하 소재지-1
▶ 조명기기
KC 60598-1:2025 등기구 제1부：일반요구사항 및 시험 AC 600 V 이하 소재지-1
KC 61199:2025 단일 캡 형광램프 - 안전 AC 600 V 이하 소재지-1
KC 62031:2025 일반 조명용 LED 모듈 - 안전 요구사항 DC 250 V 이하 또는 AC 600 V 이하 소재지-1
▶ 전자기적합성
ECE R10.06:2019 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

Annex 4 : Method of measuring broadband electromagnetic disturbances generated by vehicles
Annex 5 : Method of measuring narrowband electromagnetic disturbances generated by vehicles
Annex 6 : Method of testing vehicle immunity to electromagnetic radiation		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 1 GHz
BCI : 20 MHz ~ 400 MHz, 60 mA
RI : 20 MHz ~ 2 GHz, 30 V/m
TI : -450 V ~ 150 V
TE : 1 000 ns ~ 1 000 ms
EFT : ±2 KV
Surge : ±2 KV
H/F : ≤ 64 A		 소재지-2
GB/T 18387:2017 Limits and test method of magnetic and electric field strength from electric vehicles ME : 150 kHz to 30 MHz
RE : 150 kHz to 30 MHz		 소재지-2
IEC 61000-4-21:2011 Electromagnetic compatibility (EMC) - Part 4-21 : Testing and measurement techniques - Reverberation chamber test methods Freq. : 150 MHz ~ 6 GHz
E/F : Max. 100 V/m		 소재지-2
SAE J551-5:2017 Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, 150 kHz to 30 MHz ME : 150 kHz to 30 MHz
RE : 150 kHz to 30 MHz		 소재지-2
IEC 61980-1:2020 Electric vehicle wireless power transfer (WPT) systems - Part 1 : General requirements Harmonics: AC input current ≤ 75 A/phase
Voltage fluctuations/flicker: AC input current ≤ 75 A/phase
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : > 95 %, 1 cycle
60 %, 10 cycles
30 %, 25 cycles
100 %, 250 cycles
11.8 Protection from electromagnetic field
16 Electromagnetic compatibility (EMC)		 소재지-6
KS R IEC 61980-1:2020 전기자동차 무선전력전송(WPT) 시스템 - 제1부 : 일반 요구사항 Harmonics: AC input current ≤ 75 A/phase
Voltage fluctuations/flicker: AC input current ≤ 75 A/phase
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : > 95 %, 1 cycle
60 %, 10 cycles
30 %, 25 cycles
100 %, 250 cycles
11.8 전자기장으로부터의 보호
16 전자기 적합성(EMC)		 소재지-6
IEC 61980-3:2022 Electric vehicle wireless power transfer (WPT) systems - Part 3 : Specific requirements for magnetic field wireless power transfer systems Harmonics: AC input current ≤ 75 A/phase
Voltage fluctuations/flicker: AC input current ≤ 75 A/phase
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : > 95 %, 1 cycle
60 %, 10 cycles
30 %, 25 cycles
100 %, 250 cycles
11.8 Protection from electromagnetic field
16 Electromagnetic compatibility (EMC)		 소재지-6
KS R IEC TS 61980-3:2019 전기자동차 무선전력전송(WPT) 시스템 - 제3부 : 자기장 무선전력전송 시스템의 특정 요구사항 Harmonics: AC input current ≤ 75 A/phase
Voltage fluctuations/flicker: AC input current ≤ 75 A/phase
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : > 95 %, 1 cycle
60 %, 10 cycles
30 %, 25 cycles
100 %, 250 cycles
11.8 전자기장으로부터의 보호
16 전자기 적합성(EMC)		 소재지-6
SPS-SGSF-025-4-1972:2022 전기에너지저장시스템용 전력변환장치의 성능 요구사항 CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 1 GHz
ESD: ±15 kV
RS: 80 MHz ~ 2.7 GHz
EFT: ±4 kV
Surge: ±4 kV
CS: 150 kHz ~ 80 MHz
MFS: (순시) 1 000 A/m, (연속) 100 A/m		 소재지-6
IEC 61000-4-34:2005+AMD1:2009 Electromagnetic compatibility (EMC) - Part 4-34 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase 0 %, 1 cycle
40 %, (10/12) cycles (50/60) Hz
70 %, (25/30) cycles (50/60) Hz
80 %, (250/300) cycles (50/60) Hz
0 %, (250/300) cycles (50/60) Hz		 소재지-6
EN 61000-4-34:2007+A1:2009 Electromagnetic compatibility (EMC) - Part 4-34 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase 0 %, 1 cycle
40 %, (10/12) cycles (50/60) Hz
70 %, (25/30) cycles (50/60) Hz
80 %, (250/300) cycles (50/60) Hz
0 %, (250/300) cycles (50/60) Hz		 소재지-6
IEC 60533:2015 IEC 60533, Electrical and electronic installations in ships - Electromagnetic compatibility
(EMC) - Ships with a metallic hull (disponible en anglais seulement)

Equipment and installation group F : non - electrical items + equipment		 RE : 150 kHz ~ 2 GHz
CE : 10 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 Vrms
Low CS : 50 Hz ~ 10 kHz
V-DIP : ≤75 A		 소재지-6
KS C IEC 60533:1999 선박용 전기 설비 - 전기 자기 적합성
<제외항목>
장비 및 설비그룹F : 비 전기품목+장비		 CE : 10 kHz ~ 30 MHz
RE : 150 kHz ~ 2 GHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±1 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
Low CS : 50 Hz ~ 10 kHz		 소재지-6
IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz Maximum Test level :
(Continuous level) 30 Vrms
(Short time level) 300 Vrms		 소재지-6
EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz Maximum Test level :
(Continuous level) 30 Vrms
(Short time level) 300 Vrms		 소재지-6
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test Freq. : 80 MHz ~ 6 GHz
E/F : 30 V/m		 소재지-6
EN 61000-4-3:2006+A1:2008+A2:2010 Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electro magnetic field immunity test Freq. : 80 MHz ~ 6 GHz
E/F : 30 V/m		 소재지-6
IEC 61000-4-11:2004+AMD1:2017 Electromagnetic compatibility (EMC) - Part 4-11 : Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests 0 %, 0.5 cycle
0 %, 1 cycle
40 %, 10/12 cycles(50/60) Hz
70 %, 25/30 cycles(50/60) Hz
80 %, 250/300 cycles(50/60) Hz
0 %, 250/300 cycles(50/60) Hz		 소재지-6
▶ 전기재료 및 부품
KS C IEC 60730-1:2022 자동제어장치 - 제1부: 일반 요구사항 AC 450 V 이하, 30 A 이하 소재지
IEC 60335-2-6:2024 Household and similar electrical appliances - Safety - Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
Annex R		 up to AC 450 V, up to 30 A 소재지
IEC 60335-2-7:2024 Household and similar electrical appliances - Safety - Part 2-7 : Particular requirements for washing machines
Annex R		 up to AC 450 V, up to 30 A 소재지
IEC 60335-2-9:2019 Household and similar electrical appliances - Safety - Part 2-9 : Particular requirements for grills, toasters and similar portable cooking appliances
Annex R		 up to AC 450 V, up to 30 A 소재지
IEC 60335-2-11:2024 Household and similar electrical appliances - Safety - Part 2-11 : Particular requirements for tumble dryers
Annex R		 up to AC 450 V, up to 30 A 소재지
▶ 산업용 전기기기
IEC 60079-6:2015+AMD1:2020 Explosive atmospheres - Part 6 : Equipment protection by liquid immersion “o”

6.1.3 Overpressure test on unsealed enclosures
6.1.4 Maximum temperature

Annex D		 Max. 13 640 V, Max. 2 000 A,
Max. Overpressure: 1 MPa,
Surface Temp.: (-60 ~ +500) ℃

Max. Overpressure: 150 kPa,
Surface Temp.: (-60 ~ +500) ℃		 소재지-1
▶ 가정용 전기기기
KC 60335-2-56:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-56부 : 영사기 및 이와 유사한 전기기기의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
KC 60335-2-81:2025 가정용 및 이와 유사한 전기기기의 안전성 - 제2-81부 : 발보온기 및 발보온 매트의 개별 요구사항 입력 : (3 ~ 450) V, 50 A
온도 : 200 ℃
습도 : 25 ℃, 95 % R.H.
내전압 : 5 kV
누설전류 : 50 mA		 소재지-1
▶ 조명기기
IEC 60598-1:2024 Luminaires - Part 1: General requirements and tests AC 600 V or less 소재지-1
▶ 환경 및 신뢰성
MIL-STD-810H:2019 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
Environmental engineering considerations and laboratory tests
500 Low Pressure(Altitude)
   Procedure I - Storage/Air transport
   Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
505 Solar Radiation(Sunshine)
507 Humidity
509 Salt Fog
512 Immersion
  Procedure I - Immersion
514 Vibration
  Procedure I - General vibration
516 Shock
  Procedure I - Functional Shock
  Procedure II - Materiel to be packaged
  Procedure III - Fragility
  Procedure IV - Transit drop
  Procedure V - Crash hazard
  Procedure VI - Bench handling
528 Mechanical Vibrations of Shipboard Materiel
  (Type I - Environmental And Type II- Internally Excited)		 Altitude : 0 km ~ 21 km
Maximum Temperature : 71 ℃
Minimum Temperature : -51 ℃
Temperature : (-75 ~ 180) ℃
Maximum Temperature : 49 ℃
Maximum total solar radiation : 1 120 W/m²
Maximum Temperature : 71 ℃
Humidity : 98 % R.H.
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
Depth of immersion : Up to 1 000 mm Frequency : 5 Hz ~ 3 kHz
Maximum acceleration : 200 m/s²
Maximum acceleration : 200 m/s²
Maximum duration : 20 ms
Fall height : 1.83 m or less
(4 ~ 33) Hz		 소재지-2
▶ 에너지효율
SASO 2663:2025 Air Conditioners - Minimum Energy Performance, Labelling and Testing Requirements for Low Capacity Window and Single-Split Types (500 ~ 20 000) W 부속시설-3
SASO 2874:2025 Large Capacity Air Conditioners - Performance Requirements and Methods of Testing (3 000 ~ 320 000) W 부속시설-3
IEC 60456:2024 Washing machines for household use - Methods for measuring the performance

8.6 Measurements to determine rinsing performance		 Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
IRAM 62301:2012 Medicion y etiquetado del consumo de potencia en modo
en espera ("standby") para aparatos electricos		 100 W or less 소재지
BS EN 60456:2016+A12:2023 Clothes washing machines for household use - Methods for measuring the performance

Annex ZF Method for the determination of rinsing		 Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
BS EN IEC 62512:2020+A12:2023 Electric clothes washer - dryers for household use - Methods for measuring the performance Input Power : Max. 5 kW
Input Voltage : Single Phase Max. 250 V
Frequency : 50/60 Hz		 소재지
▶ 가정용 전기기기
IEC 61851-1:2017 Electric vehicle conductive charging system - Part 1: General requirements Input Voltage: 3P4W, below 440 V 소재지-1
SASO-IEC-61851-1:2018 Electric vehicle conductive charging system - Part 1: General requirements Input Voltage: 3P4W, below 440 V 소재지-1
SASO-IEC-61851-1:2018/AMD1:2022 Electric vehicle conductive charging system - Part 1: General requirements Input Voltage: 3P4W, below 440 V 소재지-1
SASO-IEC-61851-24:2018 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging Input : below 600 V 소재지-1
SASO-IEC-61851-23:2019 Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station Input : below 600 V 소재지-1
IEC 60335-2-6:2024 Household and similar electrical appliances - Safety
- Part 2-6 : Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
▶ 전자기적합성
EN IEC 61000-3-2:2019+A2:2024 Electromagnetic compatibility(EMC)
- Part 3-2: Limits - Limits for Harmonic Current Emissions(equipment input current ≤16 A per phase)		 16 A or less 소재지-1
EN IEC 61000-4-6:2023 Electromagnetic compatibility(EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances induced by radio- frequency fields Frequency range : 150 kHz ~ 80 MHz
Voltage : Max. 10 Vrms		 소재지-1
ISO 4358:2023 Test methods for civil multi-copter
unmanned aircraft system
5.8.3.1 Radiated, radio-frequency, electromagnetic field immunity
5.8.3.2 Power frequency magnetic field immunity
5.8.3.3 Electrostatic discharge immunity		 ESD : ±15 kV
RS : 80 MHz ~ 6GHz, 10 V/m
MFS : Maximum magnetic field
(continuous field) 100 A/m
(Short persistence) 1 000 A/m		 소재지-6
SASO-GSO-IEC 61851-21-2:2024 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems RE : 2 kHz ~ 6 GHz
CE : 9 kHz ~ 30 MHz
Harmonic : (2-40), Single phase ≤16 A
3-phase per phase ≤75 A
Flicker : Single phas ≤16 A
3-phase per phase ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 100 A/m
V-DIP : 0 %, 1 cycle
40 %, 10/12 cycles (50/60) Hz
70 %, 25/30 cycles (50/60) Hz
0 %, 250/300 cycles (50/60) Hz
Transient voltage: (0~2) kV		 소재지-6
▶ 산업용 전기기기
IEC 60079-28:2025 Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

6.2 Verification of suitability of test set-up for type tests
6.3 Type tests

5.2.2.2 Optical power		 1 μW ~ 3 W 소재지-1
▶ 에너지효율
IEC 62885-4:2020+AMD1:2023 Surface cleaning appliances -
Part 4: Cordless dry vacuum cleaners for household or similar use - Methods for measuring the performance		 Suction power : (0 ~ 500) W 소재지-1
IEC 62552-3:2015+AMD1:2020+AMD2:2025 Household Refrigerating Appliances - Characteristics And Test Methods Part 3 : Energy consumption and volume 10 kW or less 소재지-1
IEC 62552-2:2015+AMD1:2020+AMD2:2025 Household Refrigerating Appliances - Characteristics And Test Methods Part 2 : Performance requirements 10 kW or less 소재지-1
IEC 62552-1:2015+AMD1:2020+AMD2:2025 Household Refrigerating Appliances - Characteristics And Test Methods Part 1 : General Requirements 10 kW or less 소재지-1
▶ 전자기적합성
IEC 61000-4-2:2025 Electromagnetic Compatibility (EMC)
- Part 4-2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test		 Max. ±30 kV, 150 ㎊/330 Ω 소재지-1
EN 61000-4-2:2025 Electromagnetic compatibility(EMC)
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test		 Max. ±30 kV, 150 ㎊/330 Ω 소재지-1
▶ 소프트웨어
KS C IEC 60730-1:2022 자동제어장치 – 제1부: 일반 요구사항
- 부속서 H : 기능안전과 관련된 요구사항		 - 소재지-4
▶ 환경 및 신뢰성
산업통상자원부 고시 제2025-149호(2025.08.29) 전력량계 기술기준
5.2.1 내충격성
5.2.2 내진동성
8.3.2 내열성
8.3.3 내한성
8.3.4 온습도사이클
8.3.5 태양열복사		 최고가능온도: 200 ℃
최저가능온도: -60 ℃
온도 : (10 ~ 55) ℃
습도 : (20 ~ 98) % R.H.
온도 : (-45 ~ 180) ℃
최대태양광 : 1 120 W/m²
주파수: (10 ~ 150) Hz
진폭: 0.075 mm
가속도: 9.8 m/s²
충격파형 : 반정현파
최대 충격가속도 : 300 m/s²
펄스지속시간 : 18 ms		 소재지-2
MIL-STD-810H:(w/Change 1):2022 DEPARTMENT DEFENCE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
Environmental engineering considerations and laboratory tests
500 Low Pressure(Altitude)
   Procedure I - Storage/Air transport
   Procedure II - Operation/Air carriage
501 High Temperature
502 Low Temperature
503 Temperature Shock
505 Solar Radiation(Sunshine)
507 Humidity
509 Salt Fog
512 Immersion
  Procedure I - Immersion
514 Vibration
  Procedure I - General vibration
516 Shock
  Procedure I - Functional Shock
  Procedure II - Materiel to be packaged
  Procedure III - Fragility
  Procedure IV - Transit drop
  Procedure V - Crash hazard
  Procedure VI - Bench handling
528 Mechanical Vibrations of Shipboard Materiel
  (Type I - Environmental And Type II- Internally Excited)		 Altitude : 0 km ~ 21 km
Maximum Temperature : 71 ℃
Minimum Temperature : -51 ℃
Temperature : (-75 ~ 180) ℃
Maximum Temperature : 49 ℃
Maximum total solar radiation : 1 120 W/m²
Maximum Temperature : 71 ℃
Humidity : 98 % R.H.
Salt solution concentration : (5 ± 1) %
Test chamber temperature in the exposure zone : (35 ± 2) ℃
Depth of immersion : Up to 1 000 mm Frequency : 5 Hz ~ 3 kHz
Maximum acceleration : 200 m/s²
Maximum acceleration : 200 m/s²
Maximum duration : 20 ms
Fall height : 1.83 m or less
(4 ~ 33) Hz		 소재지-2
▶ 전자기적합성
IEC 61000-4-2:2025 Electromagnetic Compatibility (EMC)
-Part4-2:TestingandMeasurementTechniques-ElectrostaticDischargeImmunityTest		 Max. ±15 kV, 150 ㎊/330 Ω 소재지-6
EN IEC 61000-4-2:2025 Electromagnetic compatibility(EMC)
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test		 Max. ±15 kV, 150 ㎊/330 Ω 소재지-6
CISPR 11:2024 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

6.3.2.3 Table 10 radiation disturbance limits(distance 30 m)		 CE : 9 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz		 소재지-2
IEC 61000-4-6:2023 Electromagnetic compatibility (EMC)
- Part 4-6 : Testing and measurement techniques - Immunity to Conducted Disturbances, Induced by radio-frequency Fields		 Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-2
IEC 61000-4-2:2025 Electromagnetic compatibility (EMC)
- Part 4-2 : Testing and measurement techniques - Electrostatic discharge immunity test		 Voltage : ±30 kV 소재지-2
CISPR TR 16-3:2020 Specification for radio disturbance and immunity measuring apparatus and methods
- Part 3 : CISPR technical reports		 - 소재지-2
ETSI EN 301 489-2 V2.1.1 Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 2: Specific conditions for radio paging equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-17 V3.3.1(2024-09) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems;
Harmonised Standard for Electro Magnetic Compatibility		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-3 V2.3.2(2023-01) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard for Electro Magnetic Compatibility		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN 301 489-1 V2.2.3 (2019-11) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements;
Harmonised Standard for ElectroMagnetic Compatibility		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-2
EN IEC 61000-4-6:2023 Electromagnetic compatibility (EMC)
- Part 4-6 : Testing and measurement techniques - Immunity to conducted disturbance, induced by radio-frequency fields		 Freq. : 150 kHz ~ 230 MHz
Voltage : 30 V		 소재지-2
▶ 소프트웨어
ISO/IEC 5259-2:2024 Artificial intelligence - Data quality for analytics and machine learning (ML) - Part 2: Data quality measures - 소재지-7
▶ 전자기적합성
KS C IEC 62052-11:2005 전기계량 장치(교류) - 시험과 시험 조건을 위한 일반 요구 조건
- 제11부 : 계량 장치
- 7.5. 전자 적합성 시험(EMC)		 AC 600 V 이하 소재지-6
KS C IEC 61000-4-12:2008 전기자기적합성(EMC) - 제4-12부 : 시험 및 측정 기술 - 링 웨이브 내성 시험 Voltage : ±4 kV 소재지-6
IEC 62052-11:2020 Electricity metering equipment - General requirements, tests and test conditions - Part 11 : Metering equipment(9.3 Electromagnetic compatibility (EMC)

9.3.12 External static magnetic fields		 CE :150 kHz ~ 30 MHz
RE ：30 MHz ~ 6 GHz
ESD : ±15 kV
RS : 30 V/m
EFT : ±4 kV
Surge : ±4 kV
CS : 10 V
MFS : 400 A/m
V-dip ≤16 A or V-dip 〉 16 A
Ring Wave : ±4 kV
Damped oscillatory wave : ±2.5 kV
DM CS : 3 A
DC-dip : 100 %, 60 %, 30 %		 소재지-6
IEC 61000-4-18:2019 Electromagnetic compatibility (EMC)
- Part 4-18 : Testing and measurement techniques –Damped oscillatory wave immunity test		 전압(저속) : ±2.5 kV
전압(고속) : ±4 kV		 소재지-6
IEC 61000-4-12:2017 Electromagnetic compatibility (EMC)
- Part 4-12 : Testing and measurement techniques - Ring wave immunity test		 Voltage : ±4 kV 소재지-6
EN 61000-4-12:2017 Electromagnetic compatibility (EMC)
- Part 4-12 : Testing and measurement techniques –Ring wave immunity test		 Voltage : ±4 kV 소재지-6
EN 301 489-52 V1.3.1 (2024.11) Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz
V-DIP : ≤75 A		 소재지-6
EN 301 489-19 V2.2.1 (2022.09) Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU		 CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
H/F : ≤75 A
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
V-DIP : ≤75 A
TI : -600 V ~ 300 V		 소재지-6
▶ 에너지효율
AHRI 550/590:2023 Performance Rating of Water-chilling and Heat Pump Water-heating Packages Using the Vapor Compression Cycle (3 000 ~ 200 000) W 부속시설-3
AHRI 551/591:2023 Performance Rating of Water-chilling and Heat Pump Water-heating Packages Using the Vapor Compression Cycle (3 000 ~ 200 000) W 부속시설-3
KS B ISO 13256-1:2021 수열원 열펌프 - 성능 시험과 평가 - 제1부: 물-공기와 브라인-공기 열펌프 (3 000 ~ 320 000) W 부속시설-3
KS B ISO 13256-2:2021 수열원 열펌프 - 성능 시험과 평가 - 제2부: 물-물과 브라인-물 열펌프 (3 000 ~ 200 000) W 부속시설-3
KS C 9314:2019 공기청정기 18 m³/min 미만 부속시설-3
KS C 9326:2021 대용량 공기청정기 성능 시험방법 25 m³/min 초과
90 m³/min 미만		 부속시설-3
AS/NZS ISO 5151:2023 Non-ducted air conditioners and heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
AS/NZS 3823.1.2:2012 Performance of electrical appliances - Airconditioners and heat pumps - Part 1.2: Ducted airconditioners and air-to-air heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
AS/NZS 3823.2:2013 Performance of electrical appliances - Air conditioners and heat pumps - Part 2: Energy labelling and minimum
energy performance standards (MEPS) requirements		 (500 ~ 320 000) W 부속시설-3
AS/NZS ISO 13256.1:2023 Water-source heat pumps - Testing and rating for performance, Part 1: Water-to-air and brine-to-air heat pumps (500 ~ 320 000) W 부속시설-3
AS/NZS ISO 13256.2:2023 Water-source heat pumps - Testing and rating for performance Part 2: Water-to-water and brine-to-water heat pumps (500 ~ 320 000) W 부속시설-3
AS/NZS 3823.1.4:2012 Performance of electrical appliances - Airconditioners and heat pumps - Part 1.4: Multiple split-system airconditioners and air-to-air heat pumps - Testing and rating for performance (500 ~ 320 000) W 부속시설-3
AS/NZS 3823.4.1:2014+A1 Performance of electrical appliances - Air conditioners and heat pumps - Part 4.1: Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Cooling seasonal performance factor (500 ~ 320 000) W 부속시설-3
AS/NZS 3823.4.2:2014+A1 Performance of electrical appliances - Air conditioners and heat pumps - Part 4.2: Air-cooled air conditioners and air-to-air heat pumps - Testing and calculating methods for seasonal performance factors - Heating seasonal performance factor (500 ~ 320 000) W 부속시설-3
ES 3795:2023 Energy efficiency label requirements for air conditioner room air conditioner (window - split) (500 ~ 320 000) W 부속시설-3
IEC 60034-2-3:2024 Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors 단상: 400 V 이하
삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
IEC TS 60034-30-2:2016 Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code) 단상: 400 V 이하
삼상: 600 V 이하
용량: 375 kW 이하		 소재지-2
기후에너지환경부 고시 제2026-4호(2026.1.12) 고효율에너지 기자재 보급 촉진에 관한 규정
 별표 1의 21. 회생제동장치		 110 kW 이하 소재지-2
▶ 전자기적합성
IEC 60669-2-1:2021 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
Clause 26 EMC requirements		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
Harmonics : (2-40)
Flicker : Single phase ≤ 16 A per phase, 3 phases ≤ 75 A per phase
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤ 16 A per phase		 소재지-2
EN IEC 60669-2-1:2022 Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic control devices
Clause 26 EMC requirements		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
Harmonics : (2-40)
Flicker : Single phase ≤ 16 A per phase, 3 phases ≤ 75 A per phase
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤ 16 A per phase		 소재지-2
KS C IEC 60669-2-1:2015 가정용 및 이와 유사한 용도의 고정 전기 설비용 스위치 - 제2-1부: 개별 요구사항 - 전자 스위치
26절 전기자기적합성(EMC) 요구사항		 CE : 9 kHz ~ 30 MHz
DCE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
Harmonics : (2-40)
Flicker : Single phase ≤ 16 A per phase, 3 phases ≤ 75 A per phase
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
MFS : 3 A/m
V-DIP : ≤ 16 A per phase		 소재지-2
IEC 61400-40:2026 Electromagnetic compatibility(EMC) - Requirements and test methods RE : 150 kHz ~ 1 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±1 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : ≤ 16 A per phase
〉 16 A per phase		 소재지-2
▶ 산업용 전기기기
KS B 7300:2021 로봇용 고정밀 감속기 성능 시험방법

6.8 속도비
6.9 효율		 입력 축 회전속도 3 000 min⁻¹ 이하
100 % 이하		 부속시설-4
KS B 7319:2023 다관절 로봇용 일체형 구동 모듈 성능 평가 방법

4.3 정격 시험
4.4 최대 토크 시험
4.5 최대 속도 시험		 출력 3.2 kW 이하
(20 ~ 500) N·m
2 000 min⁻¹ 이하		 부속시설-4
▶ 전자기적합성
IEC 61326-2-6:2025 Electrical equipment for measurement control and laboratory use - EMC requirements 
- Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 0.5 cycle @ 0 %, 1 cycle @ 0 %, (25/30) cycles((50/60) Hz) @ 70 %, (250/300) cycles((50/60) Hz) @ 0 %
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-1
EN IEC 61326-2-6:2025 Electrical equipment for measurement, control and laboratory use - EMC requirements
- Part 2-6 : Particular requirements - In vitro diagnostic(IVD) medical equipment		 RE : 150 kHz ~ 18 GHz
CE : 9 kHz ~ 30 MHz
ESD : ±15 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 6 V
MFS : 30 A/m
V-DIP : 0.5 cycle @ 0 %, 1 cycle @ 0 %, (25/30) cycles((50/60) Hz) @ 70 %, (250/300) cycles((50/60) Hz) @ 0 %
PMF : 30 kHz ~ 13.56 MHz (65 A/m)		 소재지-1
EN 301 489-19 V2.2.1 (2022-09) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band providing positioning, navigation, and timing data; Harmonised Standard for ElectroMagnetic Compatibility RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0.5 cycle @ 0 %, 1 cycle @ 0 %, 25 cycles @ 70 %, 250 cycles @ 0 %		 소재지-1
EN 301 489-52 V1.3.1 (2024-11) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility RE : 150 kHz ~ 18 GHz
CE : 150 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
MFS : 30 A/m
V-DIP : 0.5 cycle @ 0 %, 1 cycle @ 0 %, 25 cycles @ 70 %, 250 cycles @ 0 %		 소재지-1
▶ 산업용 전기기기
IEC 62351-4:2020 Power systems management and associated information exchange - Data and communications security - Part 4: Profiles including MMS and derivatives Conformance Test Procedures for IEC 61850-8-1 MMS Server Devices with IEC 62351-4 소재지-1
IEC TS 62351-100-4:2023 Power systems management and associated information exchange - Data and communication security - Part 100-4: Cybersecurity conformance testing for IEC 62351-4 Conformance Test Procedures for IEC 61850-8-1 MMS Server Devices with IEC 62351-4 소재지-1
UL 913 : 2013 STANDARD FOR SAFETY : Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations Max. 15 600 V, Max. 900 A,
Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
UL 60079-0:2019 STANDARD FOR SAFETY : Explosive atmosphere - Part 0 : Equipment-General requirements

26.11 Resistance to chemical agents for Group Ⅰ)

26.4.2 Resistance to impact
26.4.3 Drop test
26.5.1 Temperature measurement
26.6 Torque test for bushings
26.13 Surface resistance test of parts of enclosures of non-metallic materials		 Max. 15 600 V, Max. 2 000 A,
Surface Temp.: (-60 ~ +1 000) ℃

Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
UL 60079-11 : 2013 STANDARD FOR SAFETY : Explosive atmospheres - Part 11 : Equipment protection by intrinsic safety “i”

10.3 Dielectric strength tests		 Max. 15 600 V, Max. 900 A,
Surface Temp.: (-60 ~ +1 000) ℃

Max. 15 600 V		 소재지-1
UL 50E : 2020 STANDARD FOR SAFETY : Enclosures for Electrical Equipment, Environmental Considerations

8.3 Rain test
8.5 External icing test
8.7 Indoor corrosion protection
8.8 Outdoor corrosion protection
8.9 Additional corrosion protection
8.13 Gasket tests
8.16 Water exposure and immersion
8.17 Sealing compounds tests		 Type 1, 2, 3, 3X, 3S(Non-vented), 3SX(Non-vented), 4, 4X, 5(Non-vented), 6, 6P, 12(Non-vented), 12K 소재지-1
NEMA 10250 : 2024 Enclosure Types

5.4 Test for Protection Against Ingress of Water(Rain)
5.6 External Icing Test
5.8 Indoor Corrosion Protection
5.9 Outdoor Corrosion Protection
5.10 Corrosion Protection
5.14 Gasket Material Tests		 Type 1, 2, 3, 3X, 3S(Non-vented), 3SX(Non-vented), 4, 4X, 5(Non-vented), 6, 6P, 12(Non-vented), 12K 소재지-1
IEC/IEEE 60079-30-1:2025 Explosive atmosphere - Part 30-1: Electrical resistance trace heating - General and testing requirements

5.1.2 Dielectric test
5.1.3 Electrical insulation resustance test
5.1.13 Determination of maximum sheath temperature		 Dielectric test: (AC/DC) 5 kV or less
Start-up Current: 40 A or less
Surface Temp.: (-60 ~ +1 000) ℃

Dielectric test: (AC/DC) 5 kV or less
Surface Temp.: (-60 ~ +1 000) ℃		 소재지-1
▶ 수질
ASTM D4327-17 (2025) Standard Test Method for Anions in Water by Suppressed Ion Chromatography Cloride: (11 ~ 1 000) ug/L 소재지-1
ASTM D5997-15 (2024) Standard Test Method for On-Line Monitoring of otal Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection Total organic carbon (101 ~ 1 000)ug/L 소재지-1
ASTM D5391-23 (2023) Standard Test Method for
Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample		 Conductivity: (0.05 ~ 10) μS/㎝ 소재지-1
ASTM D5464-25 (2025) Standard Test Method for pH Measurement of Water of Low Conductivity pH: (4 ~ 10) 소재지-1
▶ 전자기적합성
IEC 61000-4-41:2024 Electromagnetic compatibility (EMC)
- Part 4-41 : Testing and measurement techniques - Broadband radiated immunity tests		 RS : 80 MHz ~ 6 GHz, 30 V/m 소재지-2
▶ 가정용 전기기기
IEC 60335-2-21:2022 Household and similar electrical appliances - Safety - Part 2-21 : Particular requirements for storage water heaters Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
IEC 60335-2-25:2024 Household and similar electrical appliances - Safety
- Part 2-25 : Particular requirements for microwave ovens, including combination microwave ovens		 Input : (3 ~ 450) V, 50 A
Temperature : 200 ℃
Humidity : 25 ℃, 95 % R.H.
Electric strength : 5 kV
Leakage current : 50 mA		 소재지-1
▶ 에너지효율
RTCA 97.01.8:22 ELECTRICAL PRODUCTS. HOUSEHOLD REFRIGERATORS AND FREEZERS. SPECIFICATIONS OF ENERGY EFFICIENCY. (0~600) V
(0~20) A		 소재지-1

목록