| ▶ 가정용 전기기기 |
| EN 60335-1:2012+A11:2014+A13:2017+A14:2019+A1:2019+A2:2019+A15:2021 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
19.11.4.7 Mains signal test in accordance with IEC 61000-4-13, Table 11
21.2 Scratch test
22.7 Pressure test
22.16 Test for automatic cord reels
22.32 Oxygen bomb aging test for natural or synthetic rubber
22.46 Software evaluation
22.48 Relevant test of IEC 61770
23 Internal wiring (flexing test)
24 Components (test)
25 Supply connection and external flexible cords (flexing test)
Annex B 21 Mechanical strength
Annex C Ageing test on motors
Annex F Capacitors
Annex G Safety isolating transformers
Annex H Switches
Annex I Motors having basic insulation that is inadequate for the rated voltage of the appliance
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation
Annex T UV-C radiation effect on non-metallic materials |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN 60335-2-14:2006+A1:2008+A11:2012+A12:2016 |
Household and similar electrical appliances -Safety - Part 2-14: Particular requirements for kitchen machine
[Exception]
15.101 The connecting devices of stands for cordless blenders
19.102 Coffee mills and grain grinders
20.104 Blenders
22.103 Cordless blenders
25.7 Tests of 4.2 and 4.3 of IEC 60811-504:2012 and 4.2 of IEC 60811-505:2012 |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN 60335-2-15:2016+A11:2018+A1:2021+A2:2021+A12:2021 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
15.102 The connecting devices of stands for cordless appliances
19 Abnormal operation
22.7 Espresso coffee maker
22.108 Pressure cooking appliance |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN 60335-2-2:2010+A11:2012+A1:2013 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
11 Heating (for automatic battery-powered cleaners)
15 Moisture resistance (test free fall)
19 Abnormal operation
21.101 Resistant to crushing
21.102 Resistant to abrasion
21.103 Resistant to flexing
21.104 Resistant to torsion
21.105 Resistant to cold conditions |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN 60335-2-23:2003+A1:2008+A11:2010+A2:2015 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
11.101 Appliances incorporating a swivel connection
19.2 Heaters for detachable curlers
19.102 Portable hair dryers
23 Internal wiring (flexing test)
25.14 Cord flexing
25.101 Swivel connections |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN 60335-2-65:2003+A1:2008+A11:2012+A2:2022+A12:2022 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
16.101 High- voltage transformers
23 Internal wiring
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN 60335-2-9:2003+A1:2004+A2:2006+A12:2007+A13:2010 |
Household and similar electrical appliances -Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
11 Heating (for induction hotplate and other hotplate)
15 Moisture resistance (spillage test)
21 Mechanical strength (0.7 J impact test)
22.108 Touch controls of hotplates
23 Internal wiring (flexing test)
31 Resistance to rusting |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN IEC 62368-1:2020+A11:2020 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
4.1.4 Equipment installation
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
8.5.5 High pressure lamps
10 Radiation
Annex C UV radiation
Annex G.1 Switches
Annex G.2 Relays
Annex G.3 Protective devices
Annex G.4 Connectors
Annex G.5 Wound components
Annex G.7 Mains supply cords
Annex G.8 Varistors
Annex G.9 Integrated circuit (IC) current limiters
Annex G.10 Resisters
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S.3 Flammability tests for the bottom of a fire enclosure
Annex S.5 Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| EN IEC 62368-1:2024+A11:2024 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
4.1.4 Equipment installation
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
8.5.5 High pressure lamps
10 Radiation
Annex C UV radiation
Annex G.1 Switches
Annex G.2 Relays
Annex G.3 Protective devices
Annex G.4 Connectors
Annex G.5 Wound components
Annex G.7 Mains supply cords
Annex G.8 Varistors
Annex G.9 Integrated circuit (IC) current limiters
Annex G.10 Resisters
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S.3 Flammability tests for the bottom of a fire enclosure
Annex S.5 Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60065:2014, 8thed |
Audio,video and similar electronic apparatus – Safety requirements
[Exception]
6.2 Laser radiation
6.3 Light emitting diodes (LEDs)
7.2 Softening temperature
8.17 Endurance test for wound components
8.21 Mandrel test
12.1.3 Vibration test
12.3 Remote control devices held in hand
13.4 Creepage Distance(CTI)
13.6 Jointed Insulation enclosed and sealed parts
14.2 Resistors
14.3 Capacitors and RC-units
14.6 Protective devices
14.7 Switches
16. External Flexible Cord
18. Mechanical strength of picture tubes and protection against effects of implosion
Annex A. Additional requirements for apparatus for outdoor use and wet locations
Annex H. Insulated winding wires for use without interleaved insulation |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (-20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-1:2010+A1:2013+A2:2016, Edition 5.2 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
19.11.4.7 Mains signal test in accordance with IEC 61000-4-13
21.2 Scratch test
22.7 Pressure test
22.16 Test for automatic cord reels
22.32 Oxygen bomb aging test for natural or synthetic rubber
22.46 Software evaluation
22.48 Relevant test of IEC 61770
23 Internal wiring (flexing test)
24 Components (test)
25 Supply connection and external flexible cords (flexing test)
Annex B 21 Mechanical strength
Annex C Ageing test on motors
Annex F Capacitors
Annex G Safety isolating transformers
Annex H Switches
Annex I Motors having basic insulation that is inadequate for the rated voltage of the appliance
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation
Annex T UV-C radiation effect on non-metallic materials |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-1:2020, Edition 6.0 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
19.11.4.7 Mains signal test in accordance with IEC 61000-4-13
21.2 Scratch test
22.7 Pressure test
22.16 Test for automatic cord reels
22.32 Oxygen bomb aging test for natural or synthetic rubber
22.46 Software evaluation
22.48 Relevant test of IEC 61770
23 Internal wiring (flexing test)
24 Components (test)
25 Supply connection and external flexible cords (flexing test)
Annex B 21 Mechanical strength
Annex C Ageing test on motors
Annex F Capacitors
Annex G Safety isolating transformers
Annex H Switches
Annex I Motors having basic insulation that is inadequate for the rated voltage of the appliance
Annex J Coated printed circuit boards
Annex N Proof tracking test
Annex R Software evaluation
Annex T UV-C radiation effect on non-metallic materials |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-14:2016+A1:2019, Edition 6.1 |
Household and similar electrical appliances -Safety - Part 2-14: Particular requirements for kitchen machine
[Exception]
15.101 The connecting devices of stands for cordless blenders
19.102 Coffee mills and grain grinders
20.104 Blenders
22.103 Cordless blenders
25.7 Tests of 4.2 and 4.3 of IEC 60811-504:2012 and 4.2 of IEC 60811-505:2012 |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-15:2012+A1:2016+A2:2018, Edition 6.2 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
15.102 The connecting devices of stands for cordless appliances
19 Abnormal operation
22.7 Espresso coffee maker
22.108 Pressure cooking appliance |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-2:2019, Edition 7.0 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
11 Heating (for automatic battery-powered cleaners)
15 Moisture resistance (test free fall)
19 Abnormal operation
21.101 Resistant to crushing
21.102 Resistant to abrasion
21.103 Resistant to flexing
21.104 Resistant to torsion
21.105 Resistant to cold conditions
21.106 A handle intended for carrying an appliance |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-23:2016+A1:2019, Edition 6.1 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
11.101 Appliances incorporating a swivel connection
19.2 Heaters for detachable curlers
19.102 Portable hair dryers
23 Internal wiring (flexing test)
25.14 Cord flexing
25.101 Swivel connections |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-65:2002+A1:2008+A2:2015, Edition 2.2 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
16.101 High- voltage transformers
23 Internal wiring
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-65:2023 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
16.101 High- voltage transformers
23 Internal wiring
32 Radiation, toxicity and similar hazards |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60335-2-9:2019, Edition 7.0 |
Household and similar electrical appliances -Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
11 Heating (for induction hotplate and other hotplate)
15 Moisture resistance (spillage test)
21 Mechanical strength (0.7 J impact test)
22.108 Touch controls of hotplates
23 Internal wiring (flexing test)
31 Resistance to rusting |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 60950-1:2005, 2nded+A1:2009+A2:2013 |
Information technology equipment-Safety-Part 1: General requirements
[Exception]
2.10.8.4 Abrasion resistance test
2.10.9 Thermal cycling
2.10.10 Test for Pollution Degree 1 environment and for insulating compound
2.10.11 Tests for semiconductor devices and for cemented joints
3.2.5.1 AC Power supply cord test
4.2.8 Cathode ray tube
4.3.12 Flammable liquids
4.3.13.3 Effect of ultraviolet(UV) radiation on materials
4.3.13.4 Human exposure to ultraviolet(UV) radiation
4.3.13.5 Lasers(including LEDs)
Annex A. Tests for resistance to heat and fire(Hot flaming oil test)
Annex B. Motor tests under abnormal conditions(AC motor)
Annex U(normative) Insulated winding wires for use without interleaved insulation
Annex AA Mandrel test
Annex CC Evaluation of itegrated circuit(IC) current limiters
Annex DD Requirements for the mounting means of rack-mounted equipment
Annex EE Household and home/office document/media shredders |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (-20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 62368-1:2018, Edition 3.0 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
4.1.4 Equipment installation
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
8.5.5 High pressure lamps
10 Radiation
Annex C UV radiation
Annex G.1 Switches
Annex G.2 Relays
Annex G.3 Protective devices
Annex G.4 Connectors
Annex G.5 Wound components
Annex G.7 Mains supply cords
Annex G.8 Varistors
Annex G.9 Integrated circuit (IC) current limiters
Annex G.10 Resisters
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S.3 Flammability tests for the bottom of a fire enclosure
Annex S.5 Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| IEC 62368-1:2023 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
4.1.4 Equipment installation
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
8.5.5 High pressure lamps
10 Radiation
Annex C UV radiation
Annex G.1 Switches
Annex G.2 Relays
Annex G.3 Protective devices
Annex G.4 Connectors
Annex G.5 Wound components
Annex G.7 Mains supply cords
Annex G.8 Varistors
Annex G.9 Integrated circuit (IC) current limiters
Annex G.10 Resisters
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S.3 Flammability tests for the bottom of a fire enclosure
Annex S.5 Flammability test for fire enclosure materials of equipment with a steady state power exceeding 4 000 W
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex Y Construction requirements for outdoor enclosures |
Input: 600 V, 20 A
Heating: (0 ~ 200) ℃
Withstanding Voltage: 5 kV
Temp. & Humidity: (- 20 ~ +150) ℃, 95 % R.H. 이하
Push-Pull: (0 ~ 500) N |
소재지-1 |
| KC 60335-1:2022 |
가정용 및 이와 유사한 전기기기의 안전성 제1부: 일반 요구사항
[제외항목]
19.11.4.7 KS C IEC 61000-4-13, 표 11에 따른 주전원 신호 시험
21.2 스크래치 시험
22.7 압력 시험
22.16 자동식 코드 릴 시험
22.32 천연고무 또는 합성고무에 대한 산소용기 노화시험
22.46 소프트웨어 평가
22.48 KS C IEC 61770의 해당 시험
23 내부 배선 (굽힘 시험)
24 부품 (시험)
25 전원 접속 및 외부 유연성 코드 (굽힘 시험)
부속서 B 21 기계적 강도
부속서 C 전동기의 노화 시험
부속서 F 캐패시터
부속서 G 안전절연 변압기
부속서 H 스위치
부속서 I 기기의 정격 전압에 부적합한 기초 절연을 갖는 전동기
부속서 J 피복된 인쇄 회로기판
부속서 N 내트래킹 시험
부속서 R 소프트웨어 평가
부속서 T 비금속 재료에 대한 UV-C 방사 효과 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 60335-2-14:2025 |
가정용 및 이와 유사한 전기기기의 안전성 제2-14부: 주방기기의 개별 요구사항
[제외항목]
15.101 무선 블렌더 빋침대의 연결장치
19.102 커피 분쇄기 및 곡물 분쇄기
20.104 블렌더
22.103 무선 블렌더
25.7 KS C IEC 60811-504: 2014의 4.2 및 4.3 및 KS C IEC 60811-505:2014의 4.2 시험 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 60335-2-15:2022 |
가정용 및 이와 유사한 전기기기의 안전성 제2-15부: 액체가열용 전기기의 개별요구사항
[제외항목]
15.102 무선 주전자 빋침대의 연결장치
19 이상 운전
22.7 에스프레소 커피 메이커
22.108 압력 조리 기기 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 60335-2-2:2015 |
가정용 및 이와 유사한 전기기기의 안전성 제2-2부: 전기 진공청소기 및 물흡입 청소기의 개별 요구사항
[제외항목]
11 온도 상승(전지식 자동 청소기)
15 내습성 (자유낙하 시험)
19 이상 운전
21.101 파쇄에 대한 내성
21.102 마모에 대한 내성
21.103 굽힘에 대한 내성
21.104 비틀림에 대한 내성
21.105 저온 조건에 대한 내성 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 60335-2-23:2022 |
가정용 및 이와 유사한 전기기기의 안전성 제2-23부: 피부 손질 또는 모발 손질용 전기기기의 개별요구사항
[제외항목]
11.101 회전 이음새를 장착한 기기
19.2 분리형 컬러용 가열기
19.102 휴대형 모발 건조기
23 내부 배선 (굽힘시험)
25.14 전원 코드 구부림
25.101 회전 이음쇠 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 60335-2-65:2025 |
가정용 및 이와 유사한 전기기기의 안전성 제2-65부: 공기청정기의 개별 요구사항
[제외항목]
16.101 고전압 변압기
23 내부 배선
32 방사선, 유독성 및 이와 유사한 위험 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 60335-2-9:2025 |
가정용 및 이와 유사한 전기 기기의 안전성－제2－9부：그릴, 토스터기 및 이와 유사한 휴대용 조리 기기의 개별 요구 사항
[제외항목]
11 온도 상승 (인덕션 방식 핫플레이트 및 기타 다른 핫플레이트)
15 내습성 (유출 시험)
21 기계적 강도 (0.7 J 충격 에너지)
22.108 핫플레이트의 터치 제어 장치
23 내부 배선 (굽힘 시험)
31 내부식성 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| KC 62368-1:2025 |
오디오/비디오 및 정보통신기술기기 제1부 : 안전 요구 사항
[제외항목]
4.1.4 기기 설치
5.4.1.10.2 연화온도(Vicat) 시험
5.4.3.3 재질 그룹 및 비교 트래킹 지수(CTI)
5.4.4.6.5 맨드릴(mandrel) 시험
8.5.5 고압 램프
10 방사(선)
부속서 C 자외선(UV radiation)
부속서 G.1 스위치
부속서 G.2 릴레이
부속서 G.3 보호수단 장치
부속서 G.4 커넥터
부속서 G.5 권선 부품
부속서 G.7 주전원 코드
부속서 G.8 배리스터
부속서 G.9 집적회로(IC) 전류 제한기
부속서 G.10 저항
부속서 G.13.6 코팅 인쇄 기판
부속서 G.14 부품 단자 위 코팅
부속서 G.15 가압 액체로 채워진 부품
부속서 J 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R 제한 단락 회로 시험
부속서 S.3 방화용 엔클로우저의 바닥에 대한 난연성 시험
부속서 S.5 안정 상태 전력이 4 000 W를 초과하는 기기의 방화용 엔클로우저 재질에 대한 난연성 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y 옥외용 엔클로우저 구성 요구 사항 |
입력: 600 V, 20 A
온도: (0 ~ 200) ℃
내전압: 5 kV
온습도: (- 20 ~ +150) ℃, 95 % R.H. 이하
푸쉬-풀: (0 ~ 500) N |
소재지-1 |
| ▶ 유/무선 통신기기 |
| 3GPP TS 51010-1:2024 |
Digital cellular telecommunications system (Phase 2+); Mobile Station (MS) conformance specification; Part 1: Conformance specification (section 12) |
30 MHz ~ 4 GHz |
소재지 |
| ANSI/TIA-603-F:2024 |
Land Mobile FM or PM - Communication Equipment - Measurement and Performance Standards |
9 kHz ~ 40 GHz |
소재지 |
| EN 50360:2023 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
300 MHz ~ 6 GHz |
소재지 |
| EN 50566:2025 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
30 MHz ~ 6 GHz |
소재지 |
| EN 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
300 MHz ~ 6 GHz |
소재지 |
| EN 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz ~ 6 GHz |
소재지 |
| EN IEC 62311:2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
9 kHz ~ 40 GHz |
소재지 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 MHz ~ 40 GHz |
소재지 |
| ETSI EN 300 220-1V3.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-2V3.3.1:2025 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz with power levels ranging up to 500 mW e.r.p.; Part 2: Harmonised Standard for access to radio spectrum for non specific radio equipment |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-3-1V2.1.1:2016 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-3-2V1.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 220-4V1.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
9 kHz ~ 6 GHz |
소재지 |
| ETSI EN 300 328V2.2.2:2019 |
Wideband transmission systems;Data transmission equipment operating in the 2,4 GHz band;Harmonised Standard for access to radio spectrum |
30 MHz ~ 12.75 GHz |
소재지 |
| ETSI EN 300 330V2.1.1:2017 |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 kHz ~ 1 GHz |
소재지 |
| ETSI EN 300 440V2.2.1:2018 |
Short Range Devices (SRD);Radio equipment to be used in the 1 GHz to 40 GHz frequency range;Harmonised Standard for access to radio spectrum |
30 MHz ~ 40 GHz |
소재지 |
| ETSI EN 301 893V2.2.1:2024 |
5 GHz WAS/RLAN;Harmonised Standard for access to radio spectrum |
30 MHz ~ 26 GHz |
소재지 |
| FCC OET Bulletin 65 supplementC:2001 |
Evaluation Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields |
30 MHz ~ 6 GHz |
소재지 |
| FCC Part 101:2026 |
Fixed microwave services |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 15 SubpartC:2026 |
Radio Frequency Devices;Intentional Radiators |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 15 SubpartE:2026 |
Radio Frequency Devices;Unlicensed National Information Infrastructure Devices |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 2.1091:2026 |
Radiofrequency radiation exposure evaluation: mobile devices |
100 MHz ~ 6 GHz |
소재지 |
| FCC Part 2.1093:2026 |
Radiofrequency radiation exposure evaluation: portable devices |
100 MHz ~ 6 GHz |
소재지 |
| FCC Part 2:2026 |
Frequency allocations and radio treaty matters;general rules and requlations |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 20:2026 |
Commercial mobile services |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 22:2026 |
Public Mobile Services |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 24:2026 |
Personal Communications Services |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 25:2026 |
Satellite communications |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 27:2026 |
Miscellaneous wireless communications service |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 90:2026 |
Private land mobile radio service |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 95:2026 |
Personal radio services |
9 kHz ~ 40 GHz |
소재지 |
| FCC Part 97:2026 |
Amateur radio service |
9 kHz ~ 40 GHz |
소재지 |
| IEC 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
300 MHz ~ 6 GHz |
소재지 |
| IEC 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz ~ 6 GHz |
소재지 |
| IEC 62311:2019 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
9 kHz ~ 40 GHz |
소재지 |
| IEC 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 MHz ~ 40 GHz |
소재지 |
| QCVN 54:2020/BTTTT |
National technical regulation on wideband data transmission equipment operating in the 2,4 GHz band |
30 MHz ~ 12.75 GHz |
소재지 |
| QCVN 55:2023/BTTTT |
National technical regulation on Short Range Device (SRD)-Radio equipment to be used in the 9 kHz to 25 MHz frequency range |
9 kHz ~ 1 GHz |
소재지 |
| QCVN 65:2021/BTTTT |
National technical regulation on radio access equipment operating in the 5 GHz RLAN band |
30 MHz ~ 26 GHz |
소재지 |
| RSS-102 Issue6:2023 |
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) |
9 kHz ~ 40 GHz |
소재지 |
| RSS-119 Issue12:2025 |
Land Mobile and Fixed Equipment Operating in the Frequency Range 27.41-960 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-130 Issue2:2019 |
Mobile Broadband Services (MBS) Equipment Operating in the Frequency Bands 698-756 MHz and 777-787 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-131 Issue4:2022 |
Zone Enhancers for the Land Mobile Service |
9 kHz ~ 40 GHz |
소재지 |
| RSS-132 Issue4:2023 |
Cellular System Operating in the Bands 824-849 MHz and 869-894 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-133 Issue7:2024 |
Personal Communications Service Equipment Operating in the bands 1850-1915 MHz and 1930-1995 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-134 Issue2:2016 |
900 MHz Narrowband Personal Communications Services |
9 kHz ~ 40 GHz |
소재지 |
| RSS-139 Issue4:2022 |
Advanced Wireless Services Equipment Operating in the Bands 1710-1780 MHz and 2110-2200 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-140 Issue1:2018 |
Equipment Operating in the Public Safety Broadband Frequency Bands 758-768 MHz and 788-798 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-192 Issue5:2023 |
Flexible Use Broadband Equipment Operating in the Band 3450-3900 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-194 Issue1:2007 |
Fixed Wireless Access Equipment Operating in the Band 953-960 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-195 Issue3:2026 |
Wireless Communication Service(WCS) Equipment Operating in the Bands2305-2320 MHz and 2345-2360 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-197 Issue1:2010 |
Wireless Broadband Access Equipment Operating in the Band 3650-3700 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-199 Issue4:2023 |
Broadband Radio Service (BRS) Equipment Operating in the Band 2500-2690 MHz |
9 kHz ~ 40 GHz |
소재지 |
| RSS-210 Issue11:2024 |
Licence-Exempt Radio Apparatus: Category I Equipment |
9 kHz ~ 40 GHz |
소재지 |
| RSS-216 Issue3:2024 |
Wireless Power Transfer Devices |
9 kHz ~ 1 GHz |
소재지 |
| RSS-247 Issue4:2025 |
Digital Transmission Systems, Frequency Hopping Systems and Licence-Exempt Local Area Network Devices in 902-928 MHz, 2400-2483.5 MHz, 5150-5350 MHz, and 5470-5895 MHz bands |
9 kHz ~ 40 GHz |
소재지 |
| RSS-Gen Issue6:2025 |
General Requirements for Compliance of Radio Apparatus |
9 kHz ~ 40 GHz |
소재지 |
| 과학기술정보통신부고시 제2019-4호(2019.01.16) |
전자파인체보호기준 |
4 MHz ~ 30 GHz |
소재지 |
| 과학기술정보통신부고시 제2026-10호(2026.02.10) |
신고하지 아니하고 개설할수 있는 무선국용 무선설비의 기술기준 |
9 kHz ~ 40 GHz |
소재지 |
| 과학기술정보통신부고시 제2026-9호(2026.02.10) |
신고하지 아니하고 개설할 수 있는 무선국용 무선기기 |
9 kHz ~ 40 GHz |
소재지 |
과학기술정보통신부령 제86호
(2022.01.04) |
무선설비규칙 |
9 kHz ~ 40 GHz |
소재지 |
| 국립전파연구원고시 제2025-9호(2025.12.05) |
전자파흡수율측정기준 |
4 MHz ~ 10 GHz |
소재지 |
| 국립전파연구원고시 제2025-5호(2025.05.26) |
간이무선국·우주국·지구국의 무선설비 및 전파탐지용 무선설비 등 그 밖의 업무용 무선설비의 기술기준 |
9 kHz ~ 26.5 GHz |
소재지 |
| 국립전파연구원고시 제2023-22호(2023.12.08) |
전기통신사업용 무선설비의 기술기준 |
9 kHz ~ 40 GHz |
소재지 |
| ▶ 조명기기 |
| BS EN 60529:1992+A2:2013 |
Degrees of protection provided by enclosures (IP code) |
Dust(IP) : 1 ∼ 6
Water(IP) : 1 ∼ 8 |
소재지-1 |
| BS EN 60968:2015 |
Self-ballasted fluorescent lamps for general lighting services - Safety requirements
(Application)
E17, E26, E39
[Exception]
Photobiological safety |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| IEC 60529:1989+AMD1:1999+AMD2:2013 |
Degrees of protection provided by enclosures (IP Code) |
Dust(IP) : 1 ∼ 6
Water(IP) : 1 ∼ 8 |
소재지-1 |
| IEC 60968:2015 |
Self-ballasted fluorescent lamps for general lighting services - Safety requirements
(Application)
E17, E26, E39
[Exception]
Photobiological safety |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| K 10021:2021 |
직관형 LED램프(컨버터 외장형)용등기구 - 안전요구사항
[제외항목]
D12 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 10023:2022 |
안정기 내장형 LED 램프
(적용)
E17, E26, E39 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 20001:2015 |
직관형 LED 램프 - 컨버터 외장형 - 안전 및 성능 요구사항
[제외항목]
D12 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60598-1:2025 |
등기구 제1부 : 일반요구사항 및 시험
[제외항목]
4.4 램프홀더 (E26, E39, G13만 시험적용)
4.5 시동기 홀더
4.19 점화기
4.21 보호 차폐
4.24 uv 방사
9.2.9 수중형 등기구
12.5.1.e 할로겐 램프 회로
12.7.2 안정기/변압기 내외부에 온도 감지 조절기가 있는 등기구에 대한 시험 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60598-2-1:2022 |
등기구 제2-1부: 고정형 등기구 개별요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60598-2-2:2022 |
등기구 제2-2부: 매입형 등기구 개별요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60598-2-20:2022 |
등기구 제2-20부 : 체인형 조명기구 개별요구사항
[제외항목]
20.6.14 밀봉된 체인형 조명기구는 적당한 기계적 강도를 가져야 한다. |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60598-2-4:2022 |
등기구 제2-4부: 이동형 등기구 개별요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60598-2-5:2022 |
등기구 제2-5부： 투광조명기구 개별요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 60968:2025 |
안정기 내장형 램프 - 안전요구사항
(적용)
E17, E26, E39
[제외항목]
14. UV 방사선 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 61347-1:2022 |
램프구동장치-제1부 : 일반 및 안전요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 61347-2-13:2022 |
램프구동장치 제2-13부: LED 모듈용 DC/AC 구동장치 - 개별 요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KC 62031:2025 |
일반 조명용 LED 모듈 - 안전 요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS A 0068:2015 |
광원색의 측정방법 |
분광분포 : (380 ∼ 780) nm |
소재지-1 |
| KS C 0075:2017 |
광원의 연색성 평가 방법 |
분광분포 : (380 ∼ 780) nm |
소재지-1 |
| KS C 7612:1987 |
조도 측정 방법 |
조도 : (1 ∼ 99 000) lx |
소재지-1 |
| KS C 7613:2024 |
휘도 측정 방법 |
휘도 :(1 ∼ 1 000 000) cd/m² |
소재지-1 |
| KS C 7614:1987 |
측광 표준용 전구의 측광 방법
5. 측정방법
5.1 점등과 전압 및 전류의 측정
5.3 온광속 측정 |
입력전압 : Max 300 V
온광속 : (1 ∼ 50 000) lm |
소재지-1 |
| KS C 7651:2025 |
컨버터 내장형 LED 램프 (E17, E26, E39만 적용)
[제외항목]
6.12 전기자기 적합성 KS C 9815 및 KS C 9547
6.13 광생물학적 안전성 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C 7653:2024 |
매입형 및 고정형 LED 등기구
[제외항목]
6.14 전기자기 적합성 KS C 9815 및 KS C 9547
7.5 대기전력 (스마트 LED 등기구인 경우)
7.7 광학적 플리커 (스마트 LED 등기구인 경우)
7.8 최소 광 효율 (스마트 LED 등기구인 경우)
7.9 상관색온도 제어 ((스마트 LED 등기구인 경우) |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C 7655:2024 |
LED 모듈 전원공급용 컨버터
[제외항목]
6.15 전기자기 적합성 KS C 9815 및 KS C 9547 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C 7656:2021 |
이동형 LED/OLED 등기구
[제외항목]
6.12 전기자기 적합성 KS C 9815 및 KS C 9547
6.13 광생물학적안전성
7.6 조도 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H.
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| KS C 7657:2021 |
LED 센서 등기구
[제외항목]
6.14 전기자기 적합성 KS C 9815 및 KS C 9547
7.6.3 개폐시험 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H.
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| KS C 7658:2024 |
LED 가로등 및 보안등 기구
[제외항목]
6.13 전기자기 적합성 KS C 9815 및 KS C 9547
7.6 대기전력 (스마트 LED 등기구인 경우)
7.8 최소 광 효율 (스마트 LED 등기구인 경우)
7.9 상관색온도 제어 ((스마트 LED 등기구인 경우) |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H.
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| KS C 7659:2013 |
문자 간판용 LED 모듈의 안전 및 성능 요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H.
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| KS C 7712:2024 |
LED 투광 등기구
[제외항목]
6.13 전기자기 적합성 KS C 9815 및 KS C 9547
7.6 대기전력 (스마트 LED 등기구인 경우)
7.9 광학적 플리커 (실내용 스마트 LED 등기구인 경우)
7.10 최소 광 효율 (스마트 LED 등기구인 경우)
7.11 상관색온도 제어 (스마트 LED 등기구인 경우) |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H.
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| KS C 7716:2024 |
LED 터널 등기구
[제외항목]
6.13 전기자기 적합성 KS C 9815 및 KS C 9547
7.5 대기전력 (스마트 LED 등기구인 경우)
7.7 최소 광 효율 (스마트 LED 등기구인 경우)
7.8 상관색온도 제오 ((스마트 LED 등기구인 경우) |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H.
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| KS C IEC 60529:2013 |
외함의 밀폐 보호등급 구분(IP 코드) |
Dust(IP) : 1 ∼ 6
Water(IP) : 1 ∼ 8 |
소재지-1 |
| KS C IEC 60598-1:2014 |
등기구－제1부：일반 요구사항 및 시험
[제외항목]
4.4 램프홀더 (E26, E39, G13만 시험적용)
4.5 시동기 홀더
4.19 점화기
4.21 보호 차폐
4.24 UV 방사
9.2.9 수중형 등기구
12.5.1.e 할로겐 램프 회로
12.7.2 안정기/변압기 내외부에 온도 감지 조절기가 있는 등기구에 대한 시험 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60598-2-1:2020 |
등기구－제2－1부: 고정형 등기구 - 개별 요구 사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60598-2-2:2011 |
등기구－제2－2부: 매입형 - 등기구 개별 요구 사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60598-2-20:2025 |
등기구－제2－20부：조명등 체인－개별 요구 사항
[제외항목]
20.7.6 기계적 강도 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60598-2-3:2014 |
등기구 — 제2-3부: 가로등기구 — 개별 요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60598-2-4:2017 |
등기구－제2－4부: 이동형 등기구－개별 요구 사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60598-2-5:2015 |
등기구－제2－5부: 투광 등기구－개별 요구 사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 60968:2015 |
안정기 내장형 형광램프 — 안전 요구사항
(적용)
E17, E26, E39
[제외항목]
16. 광생물학적 안전성 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 61347-1:2015 |
램프 구동장치 - 제1부 : 일반 및 안전요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 61347-2-13:2014 |
램프 구동장치－제2-13부：LED 모듈 구동장치(DC/AC) 개별 요구사항 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| KS C IEC 62031:2018 |
일반 조명용 LED 모듈－안전 규격
[제외항목]
21 광생물학적 안전성 |
입력전압 : Max 300 V
접지연속성시험기 : 5.4 V, 66A
절연내력 : 5 kV, 200 mA
절연저항 : Max 9.9 GΩ
항온항습기:
- 온도 : -40 ℃ ∼ 120 ℃
- 습도 : Max 98 % R.H. |
소재지-1 |
| 기후에너지환경부고시 제2025-73호(2025.12.26) |
환경표지대상제품 및 인증기준
EL209 일반조명용 LED램프
EL210 LED 등기구 |
배광시험 :
- 광속 : (1 ∼ 100 000) lm
적분구 :
- 역율 : 0 ∼ 1
- 연색성 : 0 ∼ 100
- 상관색온도
(1 600 ∼ 10 000) K |
소재지-1 |
| ▶ 전자기적합성 |
| ANSI C63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
9 kHz to 40 GHz |
소재지 |
| ANSI C63.4:2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
Amendment 1: Test Site Validation |
9 kHz to 40 GHz |
소재지 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| AS CISPR 11:2017+A1:2020 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| AS CISPR 14.1:2018 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 1 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| AS/NZS CISPR 14.1:2013 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 1 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| AS/NZS CISPR 14.1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| AS/NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| AS/NZS CISPR 32:2015+A1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| CISPR 11:2015+A1:2016+A2:2019 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| CISPR 13:2009+A1:2015 |
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| CISPR 14-1:2016 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 1 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| CISPR 14-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 50130-4:2011+A1:2014 |
Alarm systems - Part 4 : electromagnetic compatibility - Product family standard : immunity requirements for components of fire, intruder, hold up, CCTV, acess control and social alarm systems |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 50498:2010 |
Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles |
RE : 30 MHz to 1 GHz
CTI : Pluse 1, 2a, 2b, 3a, 3b, 4
CTE : 12 V, 24 V System |
소재지 |
| EN 55011:2016+A1:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| EN 55011:2016+A11:2020 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| EN 55011:2016+A2:2021 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| EN 55013:2013+A1:2016 |
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| EN 55014-1:2017 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 1 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| EN 55014-1:2017+A11:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 1 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| EN 55014-2:2015 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 55032:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| EN 55032:2015+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: ±30 kV
RS: 30 V/m, 80 MHz to 6 000 MHz
EFT: ±4 kV
Surge: ±4 kV
CS: 0.15 MHz to 80 MHz
MF: 100 A/m
V-DIP: (0~100)% |
소재지 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
ESD: ±30 kV
RS: 30 V/m, 80 MHz to 6 000 MHz
EFT: ±4 kV
Surge: ±4 kV
CS: 0.15 MHz to 80 MHz
MF: 100 A/m
V-DIP: (0~100)% |
소재지 |
| EN 61000-3-3:2013+A1:2019 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
Max. 16 A |
소재지 |
| EN 61000-3-3:2013+A1:2019+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
Max. 16 A |
소재지 |
| EN 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Max. 16 A |
소재지 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques -Electrostatic discharge immunity test |
Max. 30 kV |
소재지 |
| EN 61000-4-3:2006+A1:2008+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz to 6 GHz |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
Max. 4 kV |
소재지 |
| EN 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Max. 4 kV |
소재지 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
0.15 MHz to 230 MHz |
소재지 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
M/F : 100 A |
소재지 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 2: Immunity - Product family standard |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61000-3-2:2019 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
Max. 16 A |
소재지 |
| EN IEC 61000-3-2:2019+A1:2021 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
Max. 16 A |
소재지 |
| EN IEC 61000-3-2:2019+A1:2021+A2:2024 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
Max. 16 A |
소재지 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Max. 16 A |
소재지 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz to 6 GHz |
소재지 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD: ±30 kV
RS: 30 V/m, 80 MHz to 6 000 MHz
EFT: ±4 kV
Surge: ±4 kV
CS: 0.15 MHz to 80 MHz
MF: 100 A/m
V-DIP: (0~100)% |
소재지 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| FCC Part 15:2022 |
PART 15—RADIO FREQUENCY DEVICES Subpart B—Unintentional Radiators |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 40 GHz |
소재지 |
| FCC Part 15:2026 |
PART 15—RADIO FREQUENCY DEVICES Subpart B—Unintentional Radiators |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 40 GHz |
소재지 |
| ICES-003:2020 |
Information Technology Equipment (including Digital Apparatus) |
9 kHz to 40 GHz |
소재지 |
| IEC 61000-3-2:2018 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
Max. 16 A |
소재지 |
| IEC 61000-3-2:2018+A1:2020 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
Max. 16 A |
소재지 |
| IEC 61000-3-2:2018+A1:2020+A2:2024 |
Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
Max. 16 A |
소재지 |
| IEC 61000-3-3:2013+A1:2017 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
Max. 16 A |
소재지 |
| IEC 61000-3-3:2013+A1:2017+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
Max. 16 A |
소재지 |
| IEC 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Max. 16 A |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
Max. 16 A |
소재지 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques -Electrostatic discharge immunity test |
Max. 30 kV |
소재지 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques -Electrostatic discharge immunity test |
Max. 30 kV |
소재지 |
| IEC 61000-4-3:2006+A1:2007+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz to 6 GHz |
소재지 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz to 6 GHz |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
Max. 4 kV |
소재지 |
| IEC 61000-4-5:2014 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Max. 4 kV |
소재지 |
| IEC 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
Max. 4 kV |
소재지 |
| IEC 61000-4-6:2013 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
0.15 MHz to 230 MHz |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
0.15 MHz to 230 MHz |
소재지 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
M/F : 100 A |
소재지 |
| IEC 61000-6-1:2005 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61000-6-3:2006+A1:2010 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC)－제4-11부：시험 및 측정 기술－전압 강하, 순간 정전 및 전압 변동 내성 시험 |
Max. 16 A |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC)－제4-2부：시험 및 측정기술－정전기 방전 내성시험 |
Max. 30 kV |
소재지 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC)－제4-3부：시험 및 측정 기술－방사성 RF 전자기장 내성 시험 |
80 MHz to 6 GHz |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC)－제4-4부：시험 및 측정 기술－전기적 빠른 과도현상,버스트 내성 시험 |
Max. 4 kV |
소재지 |
| KS C 9610-4-5:2020 |
전자파적합성(EMC) ─ 제4-5부: 시험 및 측정 기술 ─ 서지 내성시험 |
Max. 4 kV |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) ─ 제4-5부: 시험 및 측정 기술 ─ 서지 내성시험 |
Max. 4 kV |
소재지 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC)－제4-6부：시험 및 측정 기술－전도성 RF 전자기장 내성시험 |
0.15 MHz to 230 MHz |
소재지 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC)－제4-8부：시험 및 측정기술－전원주파수 자계 내성 시험 |
M/F : 100 A |
소재지 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) ─ 제6-1부: 일반표준 — 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS C 9610-6-3:2017 |
전자파적합성(EMC) — 제6-3부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) — 제6-3부: 일반기준 — 주거용, 상업용 및 경공업 환경에서 사용하는 기기의 전자파 방해 표준 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 —무선 주파수 방해 특성 —허용기준 및 측정방법
[Exception]
6.2. rated input power 20 kVA over. 30 m Test method clause
7.6.7 Electric welding equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| KS C 9814-1:2022 |
전자파적합성(EMC) — 가정용 전기 기기, 전동 공구 및 유사 기기의 요구 사항 — 제1부: 방출 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz
DP : 30 MHz to 300 MHz |
소재지 |
| KS C 9814-2:2022 |
전자파적합성(EMC) — 가정용 전기 기기, 전동 공구 및 유사 기기의 요구 사항 — 제2부: 내성 |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS C 9832:2019 |
멀티미디어 기기 전자파 방해 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 방해 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS C 9990:2017 |
자동차 및 내연기관 구동기기류 전자파적합성(EMC) 시험방법 |
RE : 30 MHz to 1 GHz
BCI : 9 kHz to 400 MHz
RS : up to 2 GHz
CTI : Pluse 1, 2a, 2b, 3a, 3b, 4
CTE : 12 V, 24 V System |
소재지 |
| QCVN 118:2018/BTTTT |
National technical regulation on Electromagnetic compatibility of multimedia equipment -Emission requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements Part 1: General requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-2:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-3:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-4:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61000-6-2:2005 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 61000-6-4:2007+A1:2011 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD: ±30 kV
RS: 30 V/m, 80 MHz to 6 000 MHz
EFT: ±4 kV
Surge: ±4 kV
CS: 0.15 MHz to 80 MHz
MF: 100 A/m
V-DIP: (0~100)% |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| ICES-001:2020 |
Industrial, Scientific and Medical (ISM) Equipment |
9 kHz to 40 GHz |
소재지 |
| IEC 61000-6-2:2005 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61000-6-4:2006+A1:2010 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) — 제6-4부: 일반 표준 — 산업 환경에서의 전자파 방출 표준 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz |
소재지 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) —제6-2부: 일반표준 — 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-1:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-17:2020 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-17:2024 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-3:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-3:2021 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-3:2023 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| ETSI EN 301 489-50:2021 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| ETSI EN 301 489-50:2025 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| ETSI EN 301 489-52:2021 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| ETSI EN 301 489-52:2024 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| KS X 3124:2020 |
무선기기의 공통 전자파적합성 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS X 3124:2024 |
무선기기의 공통 전자파적합성 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS X 3125:2020 |
특정 소출력 무선기기 전자파적합성 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS X 3125:2024 |
특정 소출력 무선기기 전자파적합성 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS X 3126:2020 |
무선 데이터 통신 시스템용 특정 소출력 무선기기 전자파적합성 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS X 3126:2024 |
무선 데이터 통신 시스템용 특정 소출력 무선기기 전자파적합성 시험방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS X 3129:2020 |
이동통신 단말기 및 보조기기의 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| KS X 3135:2020 |
이동통신 기지국, 중계기, 보조기기의 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| QCVN 103:2016/BTTTT |
National technical regulation on electromagnetic compatibility for Base Station, Repeater, ancillary equipment of digital cellular telecomunications systems GSM, W-CDMA FDD and LTE |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| QCVN 112:2017/BTTTT |
National technical regulation on general electromagnetic compatibility for radio broadband data transmission equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| QCVN 18:2022/BTTTT |
National technical regulation on Electromagnetic Compatibility for Radio Equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| QCVN 86:2019/BTTTT |
National technical regulation on electromagnetic compatibility for mobile terminals and ancillary equipment of digital cellular telecommunication systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| QCVN 96:2015/BTTTT |
National technical regulation on electromagnetictic compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 60601-1-2:2015 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 60601-1-2:2015+A1:2021 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN 60601-2-10:2015+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and musclestimulators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-18:2015 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-19:2009+A1:2016 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-22:2013 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-25:2015 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-26:2015 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-27:2014 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-34:2014 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-37:2008+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-4:2011+A1:2019 |
Medical electrical equipment - Part 2-4:Particular requirements for the basic safety and essential erformance of cardiac defibrillators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-47:2015 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-49:2015 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-5:2015 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-54:2009+A1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-63:2015 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
and essential performance of dental
extra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 60601-2-63:2015+A1:2019 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
and essential performance of dental
extra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 80601-2-30:2010+A1:2015 |
Medical electrical equipment- Part 2-30:Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 80601-2-35:2009+A1:2016 |
Medical electrical equipment - Part 2-35: Particular requirementsfor the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN 80601-2-60:2015 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN IEC 80601-2-49:2019 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN ISO 80601-2-55:2018 |
Medical electrical equipment - Part 2-55 : particular requirements for the basic safety and essential performance of respiratory gas monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN ISO 80601-2-56:2017+A1:2020 |
Medical electrical equipment - Part 2-56 : particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| EN ISO 80601-2-61:2019 |
Medical electrical equipment -- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-1-2:2014 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 60601-1-2:2014+A1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and musclestimulators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-18:2009 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-19:2009+A1:2016 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-19:2020 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-22:2007+A1:2012 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-22:2019 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-24:2012 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-25:2011 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-26:2012 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-27:2011 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-28:2017 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-34:2011 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-37:2007+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-4:2010+A1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential erformance of cardiac defibrillators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-47:2012 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-49:2011 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-5:2009 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-54:2009+A1:2015+A2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 60601-2-63:2012+A1:2017 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment and essential performance of dental extra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 80601-2-30:2018 |
Medical electrical equipment-Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 80601-2-35:2009+A1:2016 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| ISO 80601-2-55:2018 |
Medical electrical equipment -- Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| ISO 80601-2-56:2017+AMD1:2018 |
Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| ISO 80601-2-61:2017 |
Medical electrical equipment -- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤16 A
ESD : ±30 kV
RS : 30 V/m, 80 MHz to 6 000 MHz
EFT : ±4 kV
Surge : ±4 kV
CS : 0.15 MHz to 80 MHz
MF : 100 A/m
V-DIP : (0~100)% |
소재지 |
| KS C IEC 60601-1-2:2012 |
의료용전기기기
- 제 1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항
- 보조표준: 전자파 장해-요구사항 및 시험 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS C IEC 60601-1-2:2014 |
의료용전기기기
- 제 1-2부 : 기본 안전 및 필수 성능에 관한 일반 요구사항
- 보조표준: 전자파 장해-요구사항 및 시험 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz to 30 MHz,
RE : 30 MHz to 6 GHz |
소재지 |
| EN 55015:2013+A1:2015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| EN 61547:2009 |
Equipment for general lighting purposes - EMC immunity requirements |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| EN IEC 55015:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. |
CE : 9 kHz to 30 MHz,
RE : 30 MHz to 6 GHz |
소재지 |
| EN IEC 55015:2019+A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment. |
CE : 9 kHz to 30 MHz,
RE : 30 MHz to 6 GHz |
소재지 |
| IEC 61547:2009 |
Equipment for general lighting purposes - EMC immunity requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 18 GHz
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS C 9547:2020 |
일반 조명기기 — 전자파적합성(EMC)
내성 요구사항
- 전자기적합성(EMC)
- 내성요구사항 |
ESD : ±30 kV
RS : 80 MHz to 6 GHz
CS : 150 kHz to 230 MHz
EFT & Surge : Max. 4 kV
Dip : Max.16 A
MF : 100 A/m |
소재지 |
| KS C 9815:2019 |
조명 기기 및 유사 기기의 무선 방해 특성 측정 허용기준과 측정방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| KS C 9815:2023 |
조명 기기 및 유사 기기의 무선 방해 특성 측정 허용기준과 측정방법 |
CE : 9 kHz to 30 MHz
RE : 30 MHz to 6 GHz |
소재지 |
| ▶ 에너지효율 |
기후에너지환경부고시 제2026-25호
(2026.01.23) |
대기전력저감 프로그램 운용규정
[제외항목]
제3조(대기전력저감대상 제품의 지정 등) ①의
18.모뎀
19.홈게이트웨이
22.디지털컨버터 |
최소 전력 : 0.001 W
최대 전력 : 500.00 W |
소재지-1 |
기후에너지환경부고시 제2026-26호
(2026.01.23.) |
효율관리기자재운용규정 제4조(효율관리기자재의 지정 및 범위와 측정방법 등) ①의
20.어댑터,충전기
26. 텔레비전수상기
37. 셋톱박스
42. 사이니지 디스플레이
44. 모니터
49. 컴퓨터
50. 복합기 |
최소 전력 : 0.001 W
최대 전력 : 500.00 W |
소재지-1 |
| IESLM-79-19 |
OPTICAL AND ELECTRICAL MEASUREMENTS OF SOLID-STATE LIGHTING PRODUCTS |
직류 120 V 이하 또는 교류 300 V 이하 |
소재지-1 |
기후에너지환경부 고시 제2026-4호
(2026.01.12) |
고효율에너지기자재 보급촉진에 관한 규정
14. 문자간판용LED모듈
18. 등기구
19. LED램프 |
14. 문자간판용LED모듈
- DC 50 V 이하
18. 등기구
- AC 220 V , 60 Hz
19. LED 램프
- 형광램프 대체형 LED 램프 55 W 이하 |
소재지-1 |
기후에너지환경부고시 제2026-25호
(2026.01.23) |
효율관리기자재운용규정
38. 컨버터 내장형 LED 램프
47. 직관형 LED램프(컨버터 외장형) |
38. AC 220 V, 60 Hz
47. 22 W 이하 |
소재지-1 |
