| ▶ 자동차 및 관련제품 |
| ISO 15222:2021 |
Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres
[Exception]
6. Measurement of tyre wet grip on a standard vehicle |
Load Index : 73 ~ 176 |
부속시설-1 |
| ISO 23671:2021 |
Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres
[Exception]
6. Measurement of tyre wet grip on a standard vehicle |
Load Index : 73 ~ 176 |
부속시설-1 |
| ISO 28580:2018 |
Passenger car, truck and bus tyres - Method of measuring rolling resistance - Single point test and correlation of measurement results
[Exception]
4. Test methods
(b) In the torque method
(c) In the deceleration method
(d) In the power method |
Rolling resistance(Load Index) : Max. 169 |
부속시설-1 |
| ECE Regulation No.117 Revision 5 Annex 5(2025.03.20) |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 5. Test procedures for measuring wet grip
[Exception]
(A) - C1 category tyres
4.1. Testing method
(a) using an instrumented passenger car
(B) - C2 and C3 catergory tyres
2.2 Standard vehicle procedure |
Load Index : 73 ~ 176 |
부속시설-1 |
| ECE Regulation No.117 Revision 5 Annex6(2025.03.20) |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 6. Test procedure for measuring rolling resistance
[Exception]
Annex 6
1. Test methods
(b) In the torque method
(c) In the deceleration method
(d) In the power method |
Load Index : Max. 169 |
부속시설-1 |
| 기후에너지환경부 고시 제2025-61호(2025.12.18.) |
자동차용 타이어의 에너지소비효율 측정 및 등급기준〮표시 등에 관한 규정
[별표 1] 타이어의 에너지 소비효율 측정방법
1. 회전저항계수(Rolling Resistance Coefficient, RRC) 측정방법
2. 승용차용 젖은노면제동력지수
(Wet Grip Index, G) 측정방법
3. 소형트럭용 및 중대형트럭ㆍ버스용 타이어의 젖은 노면제동력지수(Wet Grip Index, G) 측정방법
[적용제외]
[별표 1] 타이어의 에너지소비효율 측정방법
1.2 시험방법
b) 토크 법(Torque method)
c) 감속 법(Deceleration method
d) 동력 법(Power method)
2.4.1 표준 시험 차량을 이용한 방법
3.2 표준 시험 차량을 이용한 방법 |
젖은노면제동력(하중지수) : 73 ~ 176
회전저항(하중지수) : Max. 169 |
소재지 |
| ECE Regulation No.117 Revision 5 Annex 9(2025.03.20) |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 9. Test procedures for measuring the adhesion on wet surfaces of tyres in worn state
[Exception]
2.4.1. Testing method
(a) using an instrumented passenger car |
Load Index : 73 ~ 176 |
부속시설-1 |
| 산업통상부 고시 제2026-083호 (26.07.07) |
환경친화적 자동차의 요건 등에 관한 규정 |
일반 전기버스의 에너지소비효율 측정 시험방법 |
소재지 |
| ▶ 전기재료 및 부품 |
| KS C IEC 61960-3:2017 |
각형 및 원통형 리튬이차전지 셀 및 이로 구성된 전지
7.3 방전성능 |
전압: DC 1 200 V 이하
전류: DC (-1 000 ~ 1 000) A
온도: (-20 ~ 150) ℃ |
부속시설-2 |
| KS C IEC 62619:2022 |
산업용 리튬이차전지 셀 및 전지의 안전 요구사항
7.2.5 과충전 시험(셀 또는 셀 블록)
7.2.6 강제 방전 시험(셀 또는 셀 블록) |
전압: DC 1 200 V 이하
전류: DC (-1 000 ~ 1 000) A
온도: (-20 ~ 150) ℃ |
부속시설-2 |
| ▶ 산업용 전기기기 |
| IEC 60034-2-1:2024 |
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests(excluding machines for traction vehicles) [Exception] 6.1.3, 6.1.4, 6.2, 7.1.3, 7.1.4, 7.2, 8.3, 8.4, 8.5, 8.6 |
Rated Power : (0.75 ~ 180) kW |
소재지 |
| KS C IEC 60034-2-1:2014 |
회전기기 - 제2-1부: 손실 및 효율을 측정하는 표준 시험방법(견인용 모터 제외)
[적용제외]
6.1.3, 6.1.4, 6.2, 7.1.3, 7.1.4, 7.2, 8.1.3, 8.1.4, 8.1.5, 8.1.6 |
정격출력 : (0.75 ~ 180) kW |
소재지 |
| ▶ 전자기적합성 |
| CISPR 25:2021 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
[Exception]
5. Measurement of emissions received by an antenna on the same vehicle
6.6 Radiated emissions from components/modules - Stripline method |
Frequency : 150 kHz ~ 5.925 GHz
RE: 150kHz ~5.925 GHz
CE-V: 150 kHz ~ 108 MHz
CE-C: 150 kHz ~ 245 MHz |
소재지 |
| CISPR 25:2021 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
[Exception]
5. Measurement of emissions received by an antenna on the same vehicle
6.6 Radiated emissions from components/modules - Stripline method |
Frequency : 150 kHz ~ 5.925 GHz
RE: 150kHz ~5.925 GHz
CE-V: 150 kHz ~ 108 MHz
CE-C: 150 kHz ~ 245 MHz |
부속시설-2 |
| ISO 11451-2:2025 |
Road vehicles – Vehicle test
methods for electrical disturbances
from barrowband radiated
electromagnetic energy
Part 2:
Off-vehicle radiation sources
(Exception) TLS Test method,
7.4.4 Vehicle in charging mode3
or mode 4
7.4.5 Vehicle in charging mode through WPT |
Frequency : 0.01 MHz ~ 18 GHz |
소재지 |
| CISPR 12:2009 |
Vehicles, boats and internal combustion engines – Radio disturbance characteristics – Limits and methods of measurement for the protection of off-board receivers
[Exception]
5.2.1. Outdoor test site(OTS) requirements |
Frequency : 30 MHz ~ 1 GHz |
소재지 |
| ▶ 음향특성 |
| UN Regulation No.117 Annex 3 (Rev.5:2025) |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 3. Coast-by test method for measuring tyre-rolling sound emission |
Class C1, C2 |
부속시설-1 |
| ISO 13325:2019 |
Tyres－Coast-by methods for measurement of tyre-to-road sound emission |
Class C1, C2 |
부속시설-1 |
| KS M ISO 13325:2019 |
타이어 — 타이어에 의해 도로에서
발생되는 소리 측정용 타행 주행 방법 |
Class C1, C2 |
부속시설-1 |
