| ▶ 계측기기 |
| IEC 61010-1:2010 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
(Exception)
Cl.6.7.1.3 CREEPAGE DISTANCES
Cl.9.3.2 Constructional requirements / flammability
Cl.10.5.3 Insulating material
Cl.11.6 Equipment RATED with a degree of ingress protection (IP code)
Cl.11.7 Fluid pressure and leakage
Cl.12.3 Optical radiation
Cl.12.4 Microwave radiation
Cl.12.5.1 Sound level
Cl.12.5.2 Ultrasonic pressure
Cl.12.6 Laser sources
Cl.13.2.3 Implosion of cathode ray tubes |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-101:2018 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-101:2015 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-081:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-081:2015 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-051:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-051:2015 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-010:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-2-010:2014 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 61010-1:2010/AMD1:2016 |
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
(Exception)
Cl.6.7.1.3 CREEPAGE DISTANCES
Cl.9.3.2 Constructional requirements / flammability
Cl.10.5.3 Insulating material
Cl.11.6 Equipment RATED with a degree of ingress protection (IP code)
Cl.11.7 Fluid pressure and leakage
Cl.12.3 Optical radiation
Cl.12.4 Microwave radiation
Cl.12.5.1 Sound level
Cl.12.5.2 Ultrasonic pressure
Cl.12.6 Laser sources
Cl.13.2.3 Implosion of cathode ray tubes |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ▶ 산업용 전기기기 |
| KRS SG 0038-24(R):2024 |
무절연 가청주파수(AF) 궤도 회로
4.4 단위장치별 성능시험
4.4.2정류기 및 전원모듈
4.5 환경시험
- 성능검사 제외
4.5.1 전원변동시험
4.5.2 온도시험
4.5.4 진동 및 충격 시험
4.5.5 방진 및 방수 시험
4.6 절연저항 및 내전압 시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 10 MΩ 이상
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
Max. AC 600 V
Max. DC 100 V
Max. 200 A
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| KRS SG 0038-21(R):2021 |
무절연 가청주파수(AF) 궤도 회로
4.4 단위장치별 성능시험
4.4.2정류기 및 전원모듈
4.5 환경시험
- 성능검사 제외
4.5.1 전원변동시험
4.5.2 온도시험
4.5.4 진동 및 충격 시험
4.5.5 방진 및 방수 시험
4.6 절연저항 및 내전압 시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 10 MΩ 이상
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
Max. AC 600 V
Max. DC 100 V
Max. 200 A
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| KRS SG 0051-23(R):2023 |
건널목제어유니트(삽입형식)
4.2 시험
4.2.2 시험방법
다. 온도시험
마. 절연저항 및 내전압 시험
바. 진동 및 충격시험 |
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 1 000 MΩ 이상
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| KRCS C267 04:2023 |
신호부동용 정류기(고주파 모듈형)
4.3 시험
(제외사항)
4.3.2 7)항 온도상승시험 |
전압변동: AC 198 V ~ 242 V, 47 Hz ~ 63 Hz
출력전압 가변범위: DC 20 V ~ DC 34 V
절연내력: AC 1 500 V
절연저항: DC 500 V, 10 ㏁ 이상 |
소재지 |
| KS R 9193:2022 |
철도 신호 보안 부품의 절연저항 및 내전압시험 방법 |
절연내력
AC 1 000 V
AC 1 500 V
AC 3 000 V
AC 5 000 V
절연저항
DC 250 V
DC 500 V
1 MΩ 이상
3 MΩ 이상
10 MΩ 이상
30 MΩ 이상
100 MΩ 이상 |
소재지 |
| KS C IEC 60204-1:2016 |
기계류의 안정성-기계류의 전기장비 제1부:일반요구사항
18.2.2 TN-시스템 시험방식
시험1-보호본딩 회로의 연속성
18.3 절연저항 시험
18.4 전압시험
18.5 잔류전압보호 |
보호본딩회로의 연속성 시험전류 (DC 0.2 A ~ 10 A)
절연저항
DC 500 V
1 MΩ 이상
전압시험
시험전압
(AC 1 000 V 이상)
잔류전압
AC 60 V 이하 |
소재지 |
| KRS SG 0067-24(R):2024 |
지상 신호제어설비 시험방법
4.3 시험
4.3.1 기능 시험
4.3.2 전원변동 시험
4.3.3 온도 시험
4.3.5 절연저항 및 내전압 시험
4.3.6 진동 및 충격 시험
4.3.7 방진 및 방수 시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| KRS SG 0067-14:2014 |
지상 신호제어설비 시험방법
4.3 시험
4.3.1 기능 시험
4.3.2 전원변동 시험
4.3.3 온도 시험
4.3.5 절연저항 및 내전압 시험
4.3.6 진동 및 충격 시험
4.3.7 방진 및 방수 시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| KRS SG 0059-23(R):2023 |
ATS 지상장치
4.2 시험
4.2.2 시험방법
다. 절연저항 및 내전압 시험
라. 전원변동 시험
마. 온도시험
사. 진동 및 충격시험
아. 방진 및 방수시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 100 MΩ 이상
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| KRS SG 0055-24(R):2024 |
복선 자동폐색제어장치
4.2 시험
4.2.2 시험방법
1) 성능 시험
- 전원절체기 제외
- 보안기 제외
3) 절연저항 및 내전압 시험
4) 전원변동 시험
5) 온도시험 |
입력전압: AC 176 V ~ AC 264 V, Max. DC 30 V
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 1 000 MΩ 이상
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS SG 0055-21(R):2021 |
복선 자동폐색제어장치
4.2 시험
4.2.2 시험방법
1) 성능 시험
- 전원절체기 제외
- 보안기 제외
3) 절연저항 및 내전압 시험
4) 전원변동 시험
5) 온도시험 |
입력전압: AC 176 V ~ AC 264 V, Max. DC 30 V
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 1 000 MΩ 이상
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS SG 0054-24(R):2024 |
단선 자동폐색제어장치
4.2 시험
4.2.2 시험방법
1) 성능시험
- 전원절체기 제외
- 보안기 제외
3) 절연저항 및 내전압 시험
4) 전원변동 시험
5) 온도시험 |
입력전압: AC 176 V ~ AC 264 V, Max. DC 30 V
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 1 000 MΩ 이상
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS SG 0054-21(R):2021 |
단선 자동폐색제어장치
4.2 시험
4.2.2 시험방법
1) 성능시험
- 전원절체기 제외
- 보안기 제외
3) 절연저항 및 내전압 시험
4) 전원변동 시험
5) 온도시험 |
입력전압: AC 176 V ~ AC 264 V, Max. DC 30 V
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 1 000 MΩ 이상
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS SG 0036-22(R):2022 |
궤도회로기능감시장치
3.5.3항 (온도측정)
4.2 시험
4.2.2 2) 성능시험
- 동작시험 제외
4.2.2 3) 절연저항 및 절연내력시험
4.2.2 4) 온도시험
- 동작시험 제외 |
입력전압: AC 88 V ~ 132 V, AC 176 V ~ 264 V
절연내력: AC 1 500 V
절연저항: DC 500 V, 100 MΩ 이상
온도: -30 ℃ ~ 70 ℃ |
소재지 |
| KRS SG 0036-25(R):2025 |
궤도회로기능감시장치
3.5.3항 (온도측정)
4.2 시험
4.2.2 2) 성능시험
- 동작시험 제외
4.2.2 3) 절연저항 및 절연내력시험
4.2.2 4) 온도시험
- 동작시험 제외 |
입력전압: AC 88 V ~ 132 V, AC 176 V ~ 264 V
절연내력: AC 1 500 V
절연저항: DC 500 V, 100 MΩ 이상
온도: -30 ℃ ~ 70 ℃ |
소재지 |
| ES-6130-0001:2022 |
충전장치
(제외사항)
6.5.7 뇌임펄스 내전압시험
6.5.10 충전전류 제한특성시험
6.5.11 소음레벨 측정
6.5.17 전자기적합성(EMC) 시험 |
절연내력: AC 2 000 V
절연저항: DC 500 V, 5 ㏁ 이상
전압변동: 삼상 AC 342 V ~ 418 V,
직류전압 Max. 150 V
주파수변동: 58.8 Hz ~ 61.2 Hz |
소재지 |
| KRS SG 0033-21(R):2021 |
유절연 가청주파수(AF) 궤도 회로
3.4 성능 및 특성
3.4.1 종합성능
3.4.2 각부의 성능 및 특성
3.4.2.1 송신카드
3.4.2.2 수신카드
4.2 시험
4.2.2 시험의 방법
1) 성능시험 가)나)
3) 절연저항 및 내전압 시험
4) 전원변동 시험
5) 온도시험 |
전압변동: AC 176 V ~ AC 275 V, 47 Hz ~ 63 Hz
절연내력: Max. AC 3 000 V
절연저항: DC 500 V, 5 MΩ 이상
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS SG 0033-24(R):2024 |
유절연 가청주파수(AF) 궤도 회로
3.4 성능 및 특성
3.4.1 종합성능
3.4.2 각부의 성능 및 특성
3.4.2.1 송신카드
3.4.2.2 수신카드
4.2 시험
4.2.2 시험의 방법
1) 성능시험 가)나)
2) 절연저항 및 내전압 시험
3) 전원변동 시험
4) 온도시험 |
전압변동: AC 176 V ~ AC 275 V, 47 Hz ~ 63 Hz
절연내력: Max. AC 3 000 V
절연저항: DC 500 V, 5 MΩ 이상
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS SG 0014-24(R):2024 |
신호용 전원공급 장치
4.2 시험 |
입력전압: AC 220 V
전환시간: 0.2초 ~ 0.5초 이내
측정가능
절연내력: AC 1 000 V 이상
절연저항: DC 500 V, 5 MΩ 이상
온도측정범위: -20 ℃ ~ 70 ℃
습도측정범위: 20 % R.H. ~ 80 % R.H. |
소재지 |
| KRS SG 0014-21(R):2021 |
신호용 전원공급 장치
4.2 시험 |
입력전압: AC 220 V
전환시간: 0.2초 ~ 0.5초 이내
측정가능
절연내력: AC 1 000 V 이상
절연저항: DC 500 V, 5 MΩ 이상
온도측정범위: -20 ℃ ~ 70 ℃
습도측정범위: 20 % R.H. ~ 80 % R.H. |
소재지 |
| KRS CS 0003-24(R):2024 |
철도차량 차상신호장치 시험방법
4.3 시험
가. 전원 전압 변동 시험
나. 기능시험
- 신호 입출력 시험 제외
- 계전기 특성 시험 제외
다. 저온시험
라. 고온시험
마. 고온고습시험
바. 온도 사이클링 시험
자. 절연저항 및 내전압 시험
차. 진동 및 충격시험
카. 방수 시험 |
절연내력: Max. AC 1 500 V
절연저항: DC 500 V, 20 MΩ 이상
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 85 ℃
습도: Max. 98 % R.H.
진동주파수: 2 Hz ~ 500 Hz
최대가속도: 300 ㎨ |
소재지 |
| KRS CS 0003-21(R):2021 |
철도차량 차상신호장치 시험방법
4.3 시험
가. 전원 전압 변동 시험
나. 기능시험
- 신호 입출력 시험 제외
- 계전기 특성 시험 제외
다. 저온시험
라. 고온시험
마. 고온고습시험
바. 온도 사이클링 시험
자. 절연저항 및 내전압 시험
차. 진동 및 충격시험
카. 방수 시험 |
절연내력: Max. AC 1 500 V
절연저항: DC 500 V, 20 MΩ 이상
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 85 ℃
습도: Max. 98 % R.H.
진동주파수: 2 Hz ~ 500 Hz
최대가속도: 300 ㎨ |
소재지 |
| KRS CM 0026-22(R):2022 |
차량과 지상간 데이터 전송장치 시험방법
4.2 시험
(제외항목)
KRS CS 0003(철도차량 차상신호장치 시험방법)의 4.3항
나. 기능시험
- 신호 입출력 시험
계전기 특성 시험
사. 과전압시험
타. 조합시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 85 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRS CM 0026-25(R):2025 |
차량과 지상간 데이터 전송장치 시험방법
4.2 시험
(제외항목)
KRS CS 0003(철도차량 차상신호장치 시험방법)의 4.3항
나. 기능시험
- 신호 입출력 시험
계전기 특성 시험
사. 과전압시험
타. 조합시험 |
절연내력: Max. AC 2 500 V
절연저항: DC 500 V
전압변동: AC 176 V ~ AC 264 V, 47 Hz ~ 63 Hz
온도: -40 ℃ ~ 85 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRCS C311 03:2025 |
고속철도차량 철도통합무선망(LTE-R) 차상무선통신장치
4.6.3.3. 시험(인증)
(제외사항)
4.6.3.3.8. 과전압시험
4.6.3.3.14. 정전기 방전시험
4.6.3.3.15. 방사내성시험
4.6.3.3.16. 전기적 빠른과도현상 내성시험
4.6.3.3.17. 서지내성 시험
4.6.3.3.18. 전도방사 시험
4.6.3.3.19. 전자파 전도 시험
4.6.3.3.20. 전자파 방사 시험
4.6.3.3.21. 무선설비 성능 시험
4.6.3.3.22. 기능 및 성능시험 |
절연내력: Max. AC 1 500 V
절연저항: DC 500 V, 20 ㏁ 이상
온도: -40 ℃ ~ 75 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 150 Hz
가속도: Max. 50 ㎨ |
소재지 |
| KRCS C311 02:2022 |
고속철도차량 철도통합무선망(LTE-R) 차상무선통신장치
4.6.3.3. 시험(인증)
(제외사항)
4.6.3.3.8. 과전압시험
4.6.3.3.14. 정전기 방전시험
4.6.3.3.15. 방사내성시험
4.6.3.3.16. 전기적 빠른과도현상 내성시험
4.6.3.3.17. 서지내성 시험
4.6.3.3.18. 전도방사 시험
4.6.3.3.19. 전자파 전도 시험
4.6.3.3.20. 전자파 방사 시험
4.6.3.3.21. 무선설비 성능 시험
4.6.3.3.22. 기능 및 성능시험 |
절연내력: Max. AC 1 500 V
절연저항: DC 500 V, 20 ㏁ 이상
온도: -40 ℃ ~ 75 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 150 Hz
가속도: Max. 50 ㎨ |
소재지 |
| KRCS C229 06:2022 |
전자연동장치
3.5.3항 (온도측정)
4.5 구조 및 치수검사
4.6 단위 장치별 성능 시험
4.6.1 전원장치
- 아. 절연변압기 제외
4.6.2 입출력제어모듈
4.6.3 CPU모듈, I/F모듈, 버스확장모듈
4.6.4 광변환모듈
4.8 절연저항 및 절연내력 시험 |
입력전압: AC 176 V ~ 264 V, Max. DC 30 V
절연내력: Max. AC 1 500 V
절연저항: DC 500 V, 100 MΩ 이상
광변환 측정: -22 dBm ~ -14 dBm
온도: -10 ℃ ~ 50 ℃ |
소재지 |
| KRCS C027 07:2023 |
신호부동용정류기
4.2 시험 |
입력전압: AC 99 V ~ 242 V
출력전압: Max. DC 85 V
응답복구시간: 100 ms 이내
맥동전압: 50 mV이하
절연내력: AC 1 500 V
절연저항: DC 500 V, 10 MΩ 이상
온도: -20 ℃ ~ 60 ℃ |
소재지 |
| GS-6130-0050:2020 |
한전일반구매규격–무정전전원공급장치
II. 기술사항
4. 성능 및 특성
4.1 전기적 특성
- 소음 제외 |
과도응답속도: 100 ms 이하
상용전원 절체시간: 4 ms 이내
절연내력: AC 1 500 V
절연저항: DC 500 V 5 MΩ 이상
용량: 단상 15 kVA 이하 |
소재지 |
| EN 50124-1:2017 |
Railway applications - Insulation coordination - Part 1:Basic requirements – Clearances and creepage distances for all electrical and electronic equipment
(Exception)
4.2.3 Rated implus voltage UNi
4.5.2 Comparative tracking index
7.3 Verification of clearances by impulse test
8.2.2 Rated impulse voltages
8.3.1 Determination of the rated impulse voltage UNi by method 1
8.4.1 Determination of the rated impulse voltage UNi by method 1 |
단상출력: Max. 300 Vac, Max. 20 kV, 45 Hz ~ 65 Hz, Max. 66.6 A
삼상출력: Max. 500 Vac, Max. 20 kV, 45 Hz ~ 65 Hz, Max. 30 A |
소재지 |
| KRSA-4041-R0:2023 |
신호용 정류기
4.2 시험 |
입력전압: AC 99 V ~ 242 V
출력전압: Max. DC 85 V
응답복구시간: 100 ms 이내
맥동전압: 50 mV이하
절연내력: AC 1 500 V
절연저항: DC 500 V, 10 MΩ 이상
온도: -20 ℃ ~ 60 ℃ |
소재지 |
| KRSA-4041-R1:2025 |
신호용 정류기
4.2 시험 |
입력전압: AC 99 V ~ 242 V
출력전압: Max. DC 85 V
응답복구시간: 100 ms 이내
맥동전압: 50 mV이하
절연내력: AC 1 500 V
절연저항: DC 500 V, 10 MΩ 이상
온도: -20 ℃ ~ 60 ℃ |
소재지 |
| KRSA-4042-R0:2023 |
신호용 정류기(고주파 모듈형)
4.3 시험
(제외사항)
4.3.2 7)항 온도상승시험 |
전압변동: AC 198 V ~ 242 V, 47 Hz ~ 63 Hz
출력전압 가변범위: DC 20 V ~ DC 34 V
절연내력: AC 1 500 V
절연저항: DC 500 V, 10 ㏁ 이상 |
소재지 |
| KRSA-4042-R1:2025 |
신호용 정류기(고주파 모듈형)
4.3 시험
(제외사항)
4.3.2 7)항 온도상승시험 |
전압변동: AC 198 V ~ 242 V, 47 Hz ~ 63 Hz
출력전압 가변범위: DC 20 V ~ DC 34 V
절연내력: AC 1 500 V
절연저항: DC 500 V, 10 ㏁ 이상 |
소재지 |
| KRSA-T-2023-4017-R1:2024 |
전자연동장치(Relayless형)
3.5.3항 (온도측정)
4.5 구조 및 치수검사
4.6 단위 장치별 성능 시험
4.6.1 전원장치
- 아. 절연변압기 제외
4.6.2 입출력제어 모듈
4.6.3 CPU모듈, I/F 모듈, 버스확장 모듈
4.6.4 광변환 모듈
4.8 절연저항 및 절연내력 시험 |
입력전압: AC 176 V ~ 264 V, Max. DC 30 V
절연내력: Max. AC 1 500 V
절연저항: DC 500 V, 100 MΩ 이상
광변환 측정: -22 dBm ~ -14 dBm
온도: -10 ℃ ~ 50 ℃ |
소재지 |
| KRS SG 0015-23(R):2023 |
전자연동장치
4.5 구조 및 치수검사
4.6 단위 장치별 성능 시험
4.7 환경 시험
4.7.1 전원변동시험
4.7.2 온도시험
4.7.4 진동 및 충격시험
4.7.5 방진 및 방수시험
4.8 절연저항 및 절연내력 시험 |
입력전압: AC 176 V ~ 264 V, Max. DC 30 V
전압변동: AC 176 V ~ 264 V, 47 Hz ~ 63 Hz
절연내력: Max. AC 2 500 V
절연저항: DC 500 V, 10 ㏁ 이상
광변환 측정: -22 dBm ~ -14 dBm
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 800 ㎨ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-1:2012 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A1:2019 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A11:2014 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A12:2017 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A13:2017 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A14:2019 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A15:2021 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-1:2012/A2:2019 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-65 :2003/A1:2008 |
Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances.
(Exception)
Cl. 32: Radiation, toxicity and similar hazards |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-65:2003 |
Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances.
(Exception)
Cl. 32: Radiation, toxicity and similar hazards |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-65:2003/A11:2012 |
Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances.
(Exception)
Cl. 32: Radiation, toxicity and similar hazards |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-65:2003/A12:2022 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
(Exception)
Cl. 32: Radiation, toxicity and similar hazards |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-65:2003/A2:2022 |
Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances.
(Exception)
Cl. 32: Radiation, toxicity and similar hazards |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-98 :2003/A1:2005 |
Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-98:
2003+A11:2019 |
Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-98:2003 |
Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60335-2-98:2003/A2:2008 |
Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 62368-1:2014 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
Cl. 5.4.1.10: Vicat test B50 of ISO 306.
Cl. 5.4.1.4, 9.2.5: Three phase voltage supply systems.
Cl. 5.4.3.3: Test equipment for tracking index per IEC 60112.
Cl. 5.4.4.6.5: Mandrel (figure 25 to 28).
Cl. 5.4.1.5.3: Thermal cycling test procedure.
Cl. 5.6.4.1: Source with at least 1500A short circuit.
Cl.10: Radiation.
Annex G.1: Switches test according to IEC/EN61058-1.
Annex G.2: Relays test according to IEC/EN61810-1.
Annex G.3: Thermal cutoffs, PTC thermistors test according to IEC/EN60730.
Annex G.3: Thermal links test according to IEC/EN60691.
Annex G.7: supply cords test according to IEC/EN60227.
Annex G.8: Varistors test according to IEC/EN61051.
Annex G.9: IC currentlimiters.
Annex G.11: Capacitors test according to IEC/EN60384-14.
Annex G.12: Optocouplers test according to IEC/EN60747.
Annex G.15: Pressurized liquid filled components.
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex T: Mechanical strength tests.
T.8: Stress relief test (exceed 200 ℃). |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 62368-1:2014+A11:2017 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
Cl. 5.4.1.10: Vicat test B50 of ISO 306.
Cl. 5.4.1.4, 9.2.5: Three phase voltage supply systems.
Cl. 5.4.3.3: Test equipment for tracking index per IEC 60112.
Cl. 5.4.4.6.5: Mandrel (figure 25 to 28).
Cl. 5.4.1.5.3: Thermal cycling test procedure.
Cl. 5.6.4.1: Source with at least 1500A short circuit.
Cl.10: Radiation.
Annex G.1: Switches test according to IEC/EN61058-1.
Annex G.2: Relays test according to IEC/EN61810-1.
Annex G.3: Thermal cutoffs, PTC thermistors test according to IEC/EN60730.
Annex G.3: Thermal links test according to IEC/EN60691.
Annex G.7: supply cords test according to IEC/EN60227.
Annex G.8: Varistors test according to IEC/EN61051.
Annex G.9: IC currentlimiters.
Annex G.11: Capacitors test according to IEC/EN60384-14.
Annex G.12: Optocouplers test according to IEC/EN60747.
Annex G.15: Pressurized liquid filled components.
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex T: Mechanical strength tests.
T.8: Stress relief test (exceed 200 ℃). |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN IEC 62368-1:2020/A11:2020 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
Cl. 5.4.1.10: Vicat test B50 of ISO 306.
Cl. 5.4.1.4, 9.3.2: Three phase voltage supplysystems.
Cl. 5.4.3.3: Testequipment for tracking index per IEC 60112.
Cl. 5.4.4.6.5: Mandrel (figure 25 to 28).
Cl. 5.4.1.5.3: Thermal cycling test procedure.
Cl. 5.6.4.1: Source with at least 1500A short circuit.
Cl.10: Radiation.
Annex G.1: Switches test according to IEC/EN 61058-1.
Annex G.2: Relays test according to IEC/EN 61810-1.
Annex G.3: Thermal cutoffs, PTC thermistors test according to IEC/EN60730.
Annex G.3: Thermal links test according to IEC/EN 60691.
Annex G.7: supply cords test according to IEC/EN 60227.
Annex G.8: Varistors test according to IEC/EN 61051.
Annex G.9: IC current limiters.
Annex G.11: Capacitors test according to IEC/EN 60384-14.
Annex G.12: Optocouplers test according to IEC/EN 60747.
Annex G.15: Pressurized liquid filled components.
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex T: Mechanical strength tests.
T.8: Stress relief test (exceed 200 ℃). |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN IEC 62368-3:2020 |
Audio/video, information and communication technology equipment – Part 3: Safety aspects for DC power transfer through communication cables and ports |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60065:2001+A1:2005+A2:2010 |
Audio, video and similar electronic apparatus – Safety requirements
(Exception)
1.1.2: 433 V a.c. in the case of apparatus for connection to a supply other than single-phase
6: Hazardous radiations
7.2: Heat resistance of insulating material
8.22: Mandrel test
12.3: REMOTE CONTROL devices held in hand
13.3.4: Measurement of transient voltages
13.4: CREEPAGE DISTANCES – Material groups are classified (comparative tracking index)
13.5: PRINTED BOARDS
13.7: Enclosed and sealed parts
14.2.1, 14.2.2, 14.2.3, 14.2.4: Test according to IEC 60384-14
14.4: High voltage components and assemblies
14.6: Switches
14.11: Test according to IEC 60747
14.12: Test according to IEC 61051-2
16.1, 16.2, 16.3, 16.4, 16.6, 16.7: Test according to IEC 60245, IEC 60227
18: Mechanical strength of picture tubes and protection against the effects of implosion
Annex H
Annex J
Annex K
Annex M |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60065:2014 |
Audio, video and similar electronic apparatus – Safety requirements
(Exception)
1.1.2: 433 V a.c. in the case of apparatus for connection to a supply other than single-phase
6: Hazardous radiations
7.2: Test according to Softening temperature
8.21: Mandrel test
12.3: REMOTE CONTROL devices held in hand
13.3.4: Measurement of transient voltages
13.4: CREEPAGE DISTANCES – Material groups are classified (only tracking test)
13.5: PRINTED BOARDS
13.7: Enclosed and sealed parts.
14.3.2, 14.3.3, 14.3.4, 14.3.5: Test according to IEC 60384-14
14.5: High voltage components and assemblies
14.7: Switches14.11: Test according to IEC 62133.
14.12: Test according to IEC 60747.
14.13: Test according to IEC 61051-2
16: Test according to IEC 60227
18: Mechanical strength of picture tubes and protection against the effects of implosion
Annex H
Annex J
Annex K
Annex M |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60335-1:2020 |
Household and similar electrical appliances – Safety – Part 1: General requirements
(Exception)
Cl. 14: Transient overvoltage
Cl. 15.2: Moisture resistance
Cl. 19.11.4.7: Abnormal operation
Cl. 22.12: Construction
Cl. 22.16: Construction
Cl. 22.32: Construction
Cl. 24: Components
Cl. 29: Clearances, creepage, distance and solid insulation – Proof tracking test
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex N: Proof tracking test
Annex R: Software evaluation
Annex S: Battery-operated appliances powered by batteries that are non-rechargeable or not recharged in the appliance
Annex T: UV-C radiation effect on non-metallic materials |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60335-2-65:2023 |
Household and similar electrical appliances – Safety – Part 2-65:Particular requirements for air-cleaning appliances.
(Exception)
Cl. 32: Radiation, toxicity and similar hazards |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60335-2-98:2023 |
Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60950-1:2005 |
Information technology equipment – Safety – Part 1. General requirements
(Exception)
2.8.7: Switches and relays
2.10.3.9: a) Transients from a MAINS SUPPLY
2.10.4.2: Creepage distances-only subclause of CTI value
2.10.5.4: Semiconductor devices
2.10.5.8: Non-separable thin sheet material
2.10.6.2: Coated printed boards
2.10.7: Component external terminations
2.10.8.2: Thermal conditioning
2.10.8.4: Abrasion resistance test
4.2.8: Cathode ray tubes
4.3.12: Flammable liquids
4.3.13: Radiation(Ionizing, UV and laser radiation)
4.6.2: Bottoms of fire enclosures (only the distillate fuel oil)
Annex G
Annex H
Annex N (Circuit reference 2 of table N.1)
Annex R
Annex U
Annex Y
Annex AA |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60950-1:2005+A1:2009 |
Information technology equipment - Safety – Part 1. General requirements
(Exception)
2.8.7: Switches and relays
2.10.3.9: a) Transients from a MAINS SUPPLY
2.10.4.2: Creepage distances - only subclause of CTI value
2.10.5.4: Semiconductor devices
2.10.5.8: Non-separable thin sheet material
2.10.7: Component external terminations
2.10.8: Tests on coated printed boards and coated components
4.2.8: Cathode ray tubes
4.3.12: Flammable liquids
4.3.13: Radiation
4.6.2: Bottoms of fire enclosures (only the distillate fuel oil)
Annex G
Annex H
Annex N (Circuit reference 2 of Table N.1)
Annex R
Annex U
Annex Y
Annex AA |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60950-1:2005+A1:2009+A2:2013 |
Information technology equipment - Safety – Part 1. General requirements
(Exception)
2.8.7: Switches and relays
2.10.3.9: a) Transients from a MAINS SUPPLY
2.10.4.2: Creepage distances - only subclause of CTI value
2.10.5.4: Semiconductor devices
2.10.5.8: Non-separable thin sheet material
2.10.7: Component external terminations
2.10.8: Tests on coated printed boards and coated components
4.2.8: Cathode ray tubes
4.3.12: Flammable liquids
4.3.13: Radiation
4.6.2: Bottoms of fire enclosures (only the distillate fuel oil)
Annex G
Annex H
Annex N (Circuit reference 2 of table N.1)
Annex R
Annex U
Annex Y
Annex AA |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 62368-1:2014 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
Cl. 5.4.1.10: Vicat test B50 of ISO 306.
Cl. 5.4.1.4, 9.2.5: Three phase voltage supply systems.
Cl. 5.4.3.3: Test equipment for tracking index per IEC 60112.
Cl. 5.4.4.6.5: Mandrel (figure 25 to 28).
Cl. 5.4.1.5.3: Thermal cycling test procedure.
Cl. 5.6.4.1: Source with at least 1500A short circuit.
Cl.10: Radiation.
Annex G.1: Switches test according to IEC 61058-1.
Annex G.2: Relays test according to IEC 61810-1.
Annex G.3: Thermal cutoffs, PTC thermistors test according to IEC 60730.
Annex G.3: Thermal links test according to IEC60691.
Annex G.7: supply cords test according to IEC 60227.
Annex G.8: Varistors test according to IEC61051.
Annex G.9: IC current limiters.
Annex G.11: Capacitors test according to IEC 60384-14.
Annex G.12: Optocouplers test according to IEC60747.
Annex G.15: Pressurized liquid filled components.
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex T: Mechanical strength tests.
T.8: Stress relief test(exceed 200 ℃). |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
Cl. 5.4.1.10.2: Vicat test B50 of ISO 306.
Cl. 5.4.1.4, 9.2.5: Three phase voltage supply systems.
Cl. 5.4.3.3: Test equipment fortracking index per IEC 60112.
Cl. 5.4.4.6.5: Mandrel (figure 25 to 28).
Cl. 5.4.1.5.3: Thermal cycling test procedure.
Cl. 5.6.4.1: Source with at least 1500A short circuit.
Cl.10: Radiation.
Annex G.1: Switches test according to IEC 61058-1.
Annex G.2: Relays test according to IEC 61810-1.
Annex G.3: Thermal cutoffs, PTC thermistors test according to IEC 60730.
Annex G.3: Thermal links test according to IEC 60691.
Annex G.7: supply cords test according to IEC60227.
Annex G.8: Varistors test according to IEC 61051.
Annex G.9: IC current limiters.
Annex G.11: Capacitors test according to IEC 60384-14.
Annex G.12: Optocouplers test according to IEC 60747.
Annex G.15: Pressurized liquid filled components.
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex T: Mechanical strength tests.
T.8: Stress relief test (exceed 200 ℃). |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 62368-1:2023 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
(Exception)
Cl. 5.4.1.10.2: Vicat test B50 of ISO 306.
Cl. 5.4.1.4, 9.3: Three phase voltage supply systems.
Cl. 5.4.3.3: Test equipment fortracking index per IEC 60112.
Cl. 5.4.4.6.5: Mandrel (figure 25 to 28).
Cl. 5.4.1.5.3: Thermal cycling test procedure.
Cl. 5.6.4.1: Source with at least 1 500A short circuit.
Cl.10: Radiation.
Annex G.1: Switches test according to IEC 61058-1.
Annex G.2: Relays test according to IEC 61810-1.
Annex G.3: Thermal cutoffs, PTC thermistors test according to IEC 60730.
Annex G.3: Thermal links test according to IEC 60691.
Annex G.7: supply cords test according to IEC60227.
Annex G.8: Varistors test according to IEC 61051.
Annex G.9: IC current limiters.
Annex G.11: Capacitors test according to IEC 60384-14.
Annex G.12: Optocouplers test according to IEC 60747.
Annex G.15: Pressurized liquid filled components.
Annex J: Insulated winding wires for use without interleaved insulation.
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex S.3: Flammability tests for the bottom of a fire enclosure.
Annex T: Mechanical strength tests.
T.8: Stress relief test (exceed 200 ℃). |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 62368-3:2017 |
Audio/video, information and communication technology equipment – Part 3: Safety aspects for DC power transfer through communication cables and ports |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 000 MΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| K 60950-1(2.0):2011 |
정보기술기기 – 안전 제1부 : 일반 요구사항
(제외항목)
2.8.7: 스위치 및 릴레이, 관련 회로
2.10.3.9: a) 교류주전원에서 기인한 과도상태
2.10.4.2: 재질군 및 비교 트래킹 인덱스
2.10.5.4: 반도체 장치
2.10.5.8: 분리불가 박막 절연물
2.10.6.2: 코팅 인쇄회로기판
2.10.7: 부품 외부 종단
2.10.8: 코팅 인쇄회로기판과 코팅 부품 시험
4.2.8: 브라운관
4.3.12: 가연성 액체
4.3.13: 방사
4.6.2: 방화용 엔클로져의 밑면 (점화유 시험)
부속서 G
부속서 H
부속서 N (표 N.1의 회로 기준 2)
부속서 R
부속서 U
부속서 Y
부속서 AA |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| KC 60065(7.2):2015 |
오디오, 비디오 기기 및 이와 유사한 전기기기의 안전
(제외항목)
1.1.2: 단상 이외의 전원에 연결되는 기기에 있어서는 교류 433 V
6: 위험방사
7.2: 절연물의 내열성
8.21: 멘드렐 시험
12.3: 손으로 조작하는 원격조정장치
13.3.4: 과도 전압의 측정
13.4: 연면거리 - 재질군 분류
13.5: 인쇄회로기판
13.7: 밀봉 및 용접밀폐 부분
14.2.1, 14.2.2, 14.2.3,14.2.4: K 60384-14에 따른 시험
14.4: 고전압부품 및 조립품
14.6: 스위치
14.11: KS C IEC 60747에 따른 시험
14.12: K 61051-2에 따른 시험
16.1, 16.2, 16.3, 16.4, 16.6, 16.7: K 60227, K60245에 따른 시험
18: 브라운관의 기계적 강도 및 폭축의 영향에 대한 보호
부속서 H
부속서 J
부속서 K
부속서 M |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| KC 60335-1:2016 |
가정용 및 이와 유사한 전기기기의 안전성 - 제1부: 일반 요구사항
(제외항목)
Cl. 14: 과도 과전압
Cl. 15.2: 내습성
Cl. 19.11.4.7: 이상 운전
Cl. 22.12: 구조
Cl. 22.16: 구조
Cl. 22.32: 구조
Cl. 24: 부품
부속서 F: 커패시터
부속서 H: 스위치
부속서 J: 피복된 인쇄 회로기판
부속서 N: 30절 시험의 선택과 시험 순서
부속서 R: 소프트웨어 평가 |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| KC 60335-1:2022 |
가정용 및 이와 유사한 전기기기의 안전성 - 제1부:일반 요구사항 |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| KC 60335-2-65:2025 |
가정용 및 이와 유사한 전기기기의 안전성 제2-65부: 공기청정기의 개별 요구사항
(제외항목)
Cl. 23.101: UV-C 내성
Cl. 32: 방사선, 유독성 및 이와 유사한 위험성 |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| KC 60335-2-98:2025 |
가정용 및 이와 유사한 전기기기의 안전성 제2-98부: 전기 가습기의 개별요구 사항 |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| KC 62368-1:2025 |
오디오/비디오 및 정보통신기술기기 제1부 : 안전 요구 사항
(제외항목)
5.4.1.10.2: KS M ISO 306의 B50에서 명시한연화온도시험
5.4.1.4, 9.2.5: 3상 전압 공급 시스템.
5.4.3.3: KS C IEC 60112에 트래킹 테스트 장비.
5.4.4.6.5: 맨드릴 (그림 21~24).
5.4.1.5.3: 열사이클링 테스트절차.
5.6.4.1: 1500 A 제한 단락회로 시험.
10: 방사.
부속서 G.1: KS C IEC 61058-1에 따른 스위치 테스트.
부속서 G.2: KS C IEC 61810-1에 따른 릴레이 테스트.
부속서 G.3: KS C IEC 60730에 따른 PTC 서미스터테스트, 온도과승방지 장치.
부속서 G.3: KS C IEC 60691에 따른 온도 퓨즈 테스트.
부속서 G.7: KS C IEC60227에 따른 공급 코드 테스트.
부속서 G.8: KS C IEC 61051에 따른 배리스터 테스트.
부속서 G.9: IC 전류 제한기.
부속서 G.11: KS C IEC 60384-14에 따른 캐패시터테스트.
부속서 G.12: KS C IEC 60747 에 따른 옵토커플러 테스트.
부속서 G.15: 가압 액체로 채워진 부품.
부속서 J: 중간절연 없이 사용하기 위한 절연권선 전선
부속서 M.7: 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8: 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 S.3:
방화용 엔클로우저의 바닥에 대한 난연성 시험
Annex T: 기계적 강도 시험.
T.8: 응력 경감 시험 (200℃ 초과). |
시험 전압: 최대 600 Vac
시험 전원: 최대 5 kVA
시험주파수: (47 - 63) Hz
내전압 시험: 최대 AC 5 kV 또는 DC 6 kV
절연저항 시험: 최대 5 000 MΩ
측정 온도: 최대 300 °C
접지연속성 시험: 최대 60 A |
소재지-1 |
| ▶ 유/무선 통신기기 |
| IEC 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures Part 2:Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz to 6 GHz |
소재지-1 |
| EN 50566:2013 |
Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz – 6 GHz) |
100 MHz to 6 GHz |
소재지-1 |
| EN 50566:2017 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
100 MHz to 6 GHz |
소재지-1 |
| EN 50663:2017 |
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz) |
10 MHz to 40 GHz |
소재지-1 |
| AS/NZS 4268:2017 |
Radio equipment and systems - Short range devices - Limits and methods of measurement |
9 kHz ∼ 40 GHz |
소재지 |
| ARPANSA Radiation Protection Standard No.3:2002 |
Maximum Exposure Levels to Radiofrequency Fields - 3 kHz to 300 GHz |
3 KHz to 40 GHz |
소재지-1 |
| EN 62311:2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
0 Hz ~ 40 GHz |
소재지-1 |
| EN 62311:2008 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
0 Hz ~ 40 GHz |
소재지-1 |
| FCC Part1.1307 |
Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. |
3 KHz to 40 GHz |
소재지-1 |
| ETSI EN 300 220-2 V3.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
9 kHz ∼ 6 GHz |
소재지 |
| AS/NZS 2772.2:2016 |
Radiofrequency fields Part 2: Principles and methods of measurement and computation - 3 kHz to 300 GHz |
100 MHz to 6 GHz |
소재지-1 |
| 1999/519/EC |
COUNCIL RECOMMENDATION of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) |
0 Hz to 40 GHz |
소재지-1 |
| RSS-GEN Issue 5 |
General Requirements for Compliance of Radio Apparatus |
9 kHz ~ 40 GHz |
소재지 |
| ANSI C 63.10-2013 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices |
9 kHz ∼ 40 GHz |
소재지 |
| ETSI EN 300 440 V2.1.1(2017-03) |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
25 MHz ~ 40 GHz |
소재지 |
| EN 62311:2008 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
9 kHz ~ 40 GHz |
소재지 |
| EN 50360:2017 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
300 MHz to 6 GHz |
소재지-1 |
| ETSI EN 301 893 V2.1.1(2017-05) |
5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 kHz ~ 26 GHz |
소재지 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 MHz ~ 40 GHz |
소재지 |
| IEC 62209-2:2010+AMD1:2019 CSV |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz to 6 GHz |
소재지-1 |
| FCC Part 15 subpart C |
Intentional Radiators |
9 kHz ~ 40 GHz |
소재지 |
| ETSI EN 300 220-1 V3.1.1(2017-02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement |
9 kHz ~ 6 GHz |
소재지 |
| FCC Part 15 subpart E |
Unlicensed National Information Infrastructure Devices |
9 kHz ~ 40 GHz |
소재지 |
| RSS-247 Issue 3 |
Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices |
9 kHz ~ 40 GHz |
소재지 |
| IEC 62311:2019 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
0 Hz ~ 40 GHz |
소재지-1 |
| EN 50360:2001 |
Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz – 3 GHz) |
300 MHz to 3 GHz |
소재지-1 |
| EN 50360:2001+A1:2012 |
Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz – 3 GHz) |
300 MHz to 3 GHz |
소재지-1 |
| EN 50360:2017+A1:2023 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
300 MHz to 6 GHz |
소재지-1 |
| ETSI EN 300 328 V2.2.2(2019-07) |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum |
30 MHz ∼ 12.75 GHz |
소재지 |
| EN 50566:2017+A1:2023 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
100 MHz to 6 GHz |
소재지-1 |
| FCC Part2.1093 |
Radiofrequency radiation exposure evaluation: portable devices. |
3 KHz to 40 GHz |
소재지-1 |
| ANSI C 63.4-2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
9 kHz ∼ 40 GHz |
소재지 |
| 과학기술정보통신부 고시 제2019-4호(2019.1.16.) |
전자파인체보호기준 |
30 MHz to 6 GHz |
소재지-1 |
| 국립전파연구원 고시 제2023-12호(2023.06.30.) |
전자파강도 및 전자파흡수율 측정대상 기자재 |
30 MHz to 6 GHz |
소재지-1 |
| KS C 3350:2024 |
인체에 근접하여 사용하는 무선 통신기기의 전자파흡수율(SAR) 평가를 위한 측정 절차 |
4 MHz to 10 GHz |
소재지-1 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 MHz to 40 GHz |
소재지-1 |
| RSS-102 Issue 5:2015 |
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) |
100 MHz to 40 GHz |
소재지-1 |
| IEC 62209-1:2005 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) |
300 MHz to 3 GHz |
소재지-1 |
| IEC 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
300 MHz to 3 GHz |
소재지-1 |
| OET Bulletin 65 supplement C |
Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields |
9 KHz to 40 GHz |
소재지-1 |
| ETSI EN 303 413 V1.1.1(2017-06) |
Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
30 MHz ~ 8.3 GHz |
소재지 |
| ETSI EN 303 413 V1.2.1(2021-04) |
Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard for access to radio spectrum |
30 MHz ~ 8.3 GHz |
소재지 |
| ETSI EN 300 330 V2.1.1(2017-02) |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 kHz ~ 1 GHz |
소재지 |
| ARIB STD-T56 4.0:2019 |
SPECIFIC ABSORPTION RATE (SAR) ESTIMATION AND POWER DENSITY ESTIMATION FOR CELLULAR PHONE |
30 MHz to 6 GHz |
소재지-1 |
| ETSI EN 303 417 V1.1.1(2017-09) |
Wireless power transmission systems, using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 kHz ~ 1 GHz |
소재지 |
| ACMA Radio communications 2003 |
Radiocommunications (Electromagnetic Radiation — Human Exposure) Standard 2003 |
30 MHz to 6 GHz |
소재지-1 |
| EN 62209-1:2006 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Human models, instrumentation, and procedures – Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) |
300 MHz to 3 GHz |
소재지-1 |
| EN 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
300 MHz to 6 GHz |
소재지-1 |
| EN 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
100 MHz to 6 GHz |
소재지-1 |
| EN 62209-2:2010+A1: 2019 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
100 MHz to 6 GHz |
소재지-1 |
| EN IEC/IEEE 62209-1528:2021 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) |
4 MHz to 10 GHz |
소재지-1 |
| IEC/IEEE 62209-1528:2020 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices – Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) |
4 MHz to 10 GHz |
소재지-1 |
| ETSI EN 300 224 V2.1.1(2017-06) |
Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz - 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 kHz ∼ 4 GHz |
소재지 |
| IEC 62479:2010 |
Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 MHz to 40 GHz |
소재지-1 |
| IEEE Std 1528-2013 |
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
300 MHz to 6 GHz |
소재지-1 |
| QCVN 54:2020/BTTTT |
QUY CHUẨN KỸ THUẬT QUỐC GIA
VỀ THIẾT BỊ TRUYỀN DỮ LIỆU BĂNG RỘNG HOẠT ĐỘNG TRONG BĂNG TẦN 2,4 GHz
National technical regulation
on wideband data transmission equipment operating in the 2,4 GHz band |
30 MHz to 12.75 GHz |
소재지 |
| QCVN 55:2023/BTTTT |
QUY CHUẨN KỸ THUẬT QUỐC GIA
VỀ THIẾT BỊ VÔ TUYẾN CỰ LY NGẮN
DẢI TẦN 9 kHz -
25 MHz
National technical regulation
on Short Range Device (SRD)- Radio equipment to be used in the 9 kHz to 25 MHz frequency range |
9 KHz to 25 MHz |
소재지 |
| ACMA Radio communications 2014 |
Radiocommunications (Electromagnetic Radiation — Human Exposure) Standard 2014 |
30 MHz to 6 GHz |
소재지-1 |
| 국립전파연구원 고시 제2018-18호(2018.12.7.) |
전자파흡수율 측정기준 |
100 MHz to 6 GHz |
소재지-1 |
| FCC Part2.1091 |
Radiofrequency radiation exposure evaluation: mobile devices. |
10 MHz to 40 GHz |
소재지-1 |
| IEEE Std C95.3-2002 |
IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to Such Fields, 100 kHz-300 GHz |
300 MHz to 40 GHz |
소재지-1 |
| IEEE Std C95.1-2005 |
IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
9 KHz to 40 GHz |
소재지-1 |
| IEEE Std1528:2003 |
IEEE Recommended Practice for Determining the Peak Special Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
300 MHz to 3 GHz |
소재지-1 |
| ▶ 의료기기 |
| EN 60601-1:2006 |
Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(Exception)
Cl. 8.8.4.2 Resistance to environmental stress
Cl. 8.9.1.7 Material groups classification
Cl. 9.5.2 Cathode ray tubes
Cl. 9.6.2 Acoustic energy
Cl. 9.6.3 Hand-transmitted vibration
Cl. 9.7 Pressure vessels and parts subject to pneumatic and hydraulic pressure
Cl. 10 Protection against unwanted and excessive radiation HAZARDS
Cl. 11.2 Fire prevention
Cl. 11.3 Constructional requirements for fire ENCLOSURES of ME EQUIPMENT
Cl. 11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anaesthetics
Cl. 11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
Cl. 12.4.5.3 Radiotherapy equipment
Cl. 12.4.5.4 Other ME EQUIPMENT producing diagnostic or therapeutic radiation
Cl. 15.4.2 Temperature and overload control devices
Cl. 15.4.3.4 Lithium batteries
Annex G Protection against hazards of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-1:2006/A2:2021 |
Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(Exception)
Cl. 8.8.4.2 Resistance to environmental stress
Cl. 8.9.1.7 Material groups classification
Cl. 9.5.2 Cathode ray tubes
Cl. 9.6.2 Acoustic energy
Cl. 9.6.3 Hand-transmitted vibration
Cl. 9.7 Pressure vessels and parts subject to pneumatic and hydraulic pressure
Cl. 10 Protection against unwanted and excessive radiation HAZARDS
Cl. 11.2 Fire prevention
Cl. 11.3 Constructional requirements for fire ENCLOSURES of ME EQUIPMENT
Cl. 11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anaesthetics
Cl. 11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
Cl. 12.4.5.3 Radiotherapy equipment
Cl. 12.4.5.4 Other ME EQUIPMENT producing diagnostic or therapeutic radiation
Cl. 15.4.2 Temperature and overload control devices
Cl. 15.4.3.4 Lithium batteries
Annex G Protection against hazards of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-1-11:2015/A1:2021 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
Cl.8.3.1 Ingress of water or particulate matter into ME EQUIPMENT / IP testing
Cl.8.3.2 Ingress of water or particulate matter into ME SYSTEMS / IP Testing
Cl.10.1.2 Requirements for Mechanical strength for NON-TRANSIT-OPERABLE ME EQUIPMENT / Shock and Vibration
Cl.10.1.3 Requirements for Mechanical strength for TRANSIT-OPERABLE ME EQUIPMENT / Shock and Vibration
Cl.13 Additional requirements for ALARM SYSTEMS of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-1-6:2010 |
Medical electrical equipment – Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
- |
소재지-1 |
| EN 60601-1-6:2010/A2:2021 |
Medical electrical equipment – Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
- |
소재지-1 |
| EN 60601-1-8:2007/A2:2021 |
Medical electrical equipment – Part 1-8: General requirements for basic safety and essential performance – Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
(Exception)
Cl. 6.3.3 Auditory ALARM SIGNALS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-1-8:2007+A1:2013 |
Medical electrical equipment – Part 1-8: General requirements for basic safety and essential performance – Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
(Exception)
Cl. 6.3.3 Auditory ALARM SIGNALS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-2-10:2015 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
(Exception)
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-2-10:2015+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
(Exception)
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
(Exception)
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-2-27:2014 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
(Exception)
Cl.208.6 ALARM SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN 60601-2-5:2015 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
(Exception)
Cl.201.10.102 Unwanted ultrasound radiation
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN IEC 60601-2-22:2020 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
(Exception)
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs
Cl.201.13.2.101 Excessive LASER OUTPUT
Cl.201.13.2.102 Failure of exposure termination
Cl.201.13.2.103 Failure of components with limited reliability |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| EN IEC 60601-2-66:2020 |
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
(Exception)
Cl.201.9.6 Acoustic energy (including infra- and ultrasound) and vibration
Cl.201.13.1.2 Emissions, deformation of ENCLOSURE or exceeding maximum temperature |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1:2005 |
Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(Exception)
Cl. 8.8.4.2 Resistance to environmental stress
Cl. 8.9.1.7 Material groups classification
Cl. 9.5.2 Cathode ray tubes
Cl. 9.6.2 Acoustic energy
Cl. 9.6.3 Hand-transmitted vibration
Cl. 9.7 Pressure vessels and parts subject to pneumatic and hydraulic pressure
Cl. 10 Protection against unwanted and excessive radiation HAZARDS
Cl. 11.2 Fire prevention
Cl. 11.3 Constructional requirements for fire enclosures
Cl. 11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anaesthetics
Cl. 11.6.7 Sterilization
Cl. 12.4.5.3 Radiotherapy equipment
Cl. 12.4.5.4 Other ME EQUIPMENT producing diagnostic or therapeutic radiation
Cl. 15.4.2 Temperature and overload control devices
Cl. 15.4.3.4 Primary Lithium batteries
Annex G Protection against hazards of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1:2005+AMD1:2012 |
Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(Exception)
Cl. 8.8.4.2 Resistance to environmental stress
Cl. 8.9.1.7 Material groups classification
Cl. 9.5.2 Cathode ray tubes
Cl. 9.6.2 Acoustic energy
Cl. 9.6.3 Hand-transmitted vibration
Cl. 9.7 Pressure vessels and parts subject to pneumatic and hydraulic pressure
Cl. 10 Protection against unwanted and excessive radiation HAZARDS
Cl. 11.2 Fire prevention
Cl. 11.3 Constructional requirements for fire enclosures
Cl. 11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anaesthetics
Cl. 11.6.7 Sterilization
Cl. 12.4.5.3 Radiotherapy equipment
Cl. 12.4.5.4 Other ME EQUIPMENT producing diagnostic or therapeutic radiation
Cl. 15.4.2 Temperature and overload control devices
Cl. 15.4.3.4 Primary Lithium batteries
Annex G Protection against hazards of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1:2005+AMD1:2012+AMD2:2020 |
Medical electrical equipment – Part 1: General requirements for basic safety and essential performance
(Exception)
Cl. 8.8.4.2 Resistance to environmental stress
Cl. 8.9.1.7 Material groups classification
Cl. 9.5.2 Cathode ray tubes
Cl. 9.6.2 Acoustic energy
Cl. 9.6.3 Hand-transmitted vibration
Cl. 9.7 Pressure vessels and parts subject to pneumatic and hydraulic pressure
Cl. 10 Protection against unwanted and excessive radiation HAZARDS
Cl. 11.2 Fire prevention
Cl. 11.3 Constructional requirements for fire enclosures
Cl. 11.4 ME EQUIPMENT and ME SYSTEMS intended for use with flammable anaesthetics
Cl. 11.6.7 Sterilization
Cl. 12.4.5.3 Radiotherapy equipment
Cl. 12.4.5.4 Other ME EQUIPMENT producing diagnostic or therapeutic radiation
Cl. 15.4.2 Temperature and overload control devices
Cl. 15.4.3.4 Primary Lithium batteries
Annex G Protection against hazards of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1-11:2015 |
Medical electrical equipment – Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
Cl.8.3.1 Ingress of water or particulate matter into ME EQUIPMENT / IP testing
Cl.8.3.2 Ingress of water or particulate matter into ME SYSTEMS / IP Testing
Cl.10.1.2 Requirements for Mechanical strength for NON-TRANSIT-OPERABLE ME EQUIPMENT / Shock and Vibration
Cl.10.1.3 Requirements for Mechanical strength for TRANSIT-OPERABLE ME EQUIPMENT / Shock and Vibration
Cl.13 Additional requirements for ALARM SYSTEMS of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1-11:2015+AMD1:2020 |
Medical electrical equipment – Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
Cl.8.3.1 Ingress of water or particulate matter into ME EQUIPMENT / IP testing
Cl.8.3.2 Ingress of water or particulate matter into ME SYSTEMS / IP Testing
Cl.10.1.2 Requirements for Mechanical strength for NON-TRANSIT-OPERABLE ME EQUIPMENT / Shock and Vibration
Cl.10.1.3 Requirements for Mechanical strength for TRANSIT-OPERABLE ME EQUIPMENT / Shock and Vibration
Cl.13 Additional requirements for ALARM SYSTEMS of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1-12:2014 |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
(Exception)
Cl.7 Protection against electrical HAZARDS from ME EQUIPMENT / IP testing
Cl.8.1.1 Ingress of water or particulate matter into ME EQUIPMENT / IP testing
Cl.8.1.2 Ingress of water or particulate matter into ME SYSTEMS / IP Testing
Cl.10.1.2 Requirements for Mechanical strength for FIXED or PERMANENTLY INSTALLED ME EQUIPMENT intended for use in a road ambulance / Shock and Vibration
Cl.10.1.3 Requirements for Mechanical strength for TRANSPORTABLEME EQUIPMENT / Shock and Vibration
Cl.10.1.4 Requirements for mechanical strength for ME EQUIPMENT intended for airborne use
Cl.11 Additional requirements for electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1-12:2014/AMD1:2020 |
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
(Exception)
Cl.7 Protection against electrical HAZARDS from ME EQUIPMENT / IP testing
Cl.8.1.1 Ingress of water or particulate matter into ME EQUIPMENT / IP testing
Cl.8.1.2 Ingress of water or particulate matter into ME SYSTEMS / IP Testing
Cl.10.1.2 Requirements for Mechanical strength for FIXED or PERMANENTLY INSTALLED ME EQUIPMENT intended for use in a road ambulance / Shock and Vibration
Cl.10.1.3 Requirements for Mechanical strength for TRANSPORTABLEME EQUIPMENT / Shock and Vibration
Cl.10.1.4 Requirements for mechanical strength for ME EQUIPMENT intended for airborne use
Cl.11 Additional requirements for electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1-3:2008/AMD1:2013 |
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-1-3:2008/AMD2:2021 |
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-1-6:2010 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
- |
소재지-1 |
| IEC 60601-1-6:2010+AMD1:2013 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
- |
소재지-1 |
| IEC 60601-1-6:2010+AMD1:2013+AMD2:2020 |
Medical electrical equipment – Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
- |
소재지-1 |
| IEC 60601-1-8:2006+AMD1:2012 |
Medical electrical equipment – Part 1-8: General requirements for basic safety and essential performance – Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
(Exception)
Cl. 6.3.3 Auditory ALARM SIGNALS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-1-8:2006+AMD1:2012+AMD2:2020 |
Medical electrical equipment – Part 1-8: General requirements for basic safety and essential performance – Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
(Exception)
Cl. 6.3.3 Auditory ALARM SIGNALS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-10:2012 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
(Exception)
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-10:2012/AMD2:2023 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
(Exception)
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-10:2012+AMD1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
(Exception)
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-18:2009 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-2:2017/AMD1:2023 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-22:2007/AMD1:2012 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
(Exception)
Cl.201.10.4 Lasers and light emitting diodes (LEDs)
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs
Cl.201.13.2 SINGLE FAULT CONDITIONS
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-45:2011/AMD2:2022 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
(Exception)
Cl.201.9.2.1.101.3 Biopsy needle positioning accuracy
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-45:2011/AMD1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
(Exception)
Cl.201.9.2.1.101.3 Biopsy needle positioning accuracy
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-4:2010/AMD1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
(Exception)
Cl.201.11.6.3 Spillage on ME EQUIPMENT and ME SYSTEMS / IP testing
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-37:2024 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-37:2007/AMD1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-34:2011 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests
Cl.208.6.3.3 Auditory ALARM SIGNALS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-28:2017 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-27:2011 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
(Exception)
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs
Cl.208.6 ALARM SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-25:2011 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-24:2012 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
(Exception)
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-22:2019 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
(Exception)
Cl.201.10.4 Lasers
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs
Cl.201.13.2 SINGLE FAULT CONDITIONS
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-47:2012 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-5:2009 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
(Exception)
Cl.201.10.102 Unwanted ultrasound radiation
Cl.201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-54:2009/AMD1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-54:2009/AMD2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-54:2022 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-57:2023 |
Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring, cosmetic and aesthetic use
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-62:2013 |
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
(Exception)
Cl.201.10.102 Unwanted ultrasound radiation on hand-held transducers
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 60601-2-63:2012/AMD1:2017 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-63:2012/AMD2:2021 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-65:2012/AMD1:2017 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-65:2012/AMD2:2021 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 380 Vac
Test power: 150 kVA
Test frequency: (47 – 63) Hz
X-ray: (35 to 160) kVp, 0.2 mA to 2 A,
0.001s to 999 s, 10 nGy to 9,999 Gy,
(1.0 to 14.0) mmAl, 0.00 µGy/h to 0.1 Gy/h
Measuring distance: 5.5 m |
소재지-1 |
| IEC 60601-2-66:2019 |
Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
(Exception)
Cl.201.9.6 Acoustic energy (including infra- and ultrasound) and vibration
Cl.201.13.1.2 Emissions, deformation of ENCLOSURE or exceeding maximum temperature |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-26:2019 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-26:2019/AMD1:2024 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-30:2009/AMD1:2013 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
(Exception)
Cl.201.15.3.5.101 Shock and vibration for other than transport
Cl.201.15.3.5.102 Shock and vibration for transport
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-30:2018 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
(Exception)
Cl.201.15.3.5.101 Shock and vibration for other than transport
Cl.201.15.3.5.102 Shock and vibration for transport
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ISO 80601-2-61:2017 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
(Exception)
Cl.201.11.6.5.101 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT or ME SYSTEM
Cl.201.15.3.5.101.1 Shock and vibration
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic disturbances — Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ISO 80601-2-56:2017/AMD1:2018 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic disturbances — Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ISO 80601-2-56:2017 |
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic disturbances — Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ISO 80601-2-55:2018:AMD1:2023 |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
(Exception)
Cl.201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT or ME SYSTEMS
Cl.201.15.3.5.101.2 Shock and vibration for stand-alone RGM (robustness)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ISO 80601-2-55:2018 |
Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
(Exception)
Cl.201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT or ME SYSTEMS
Cl.201.15.3.5.101.2 Shock and vibration for stand-alone RGM (robustness)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-78:2024 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-78:2019 |
Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-77:2023 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-77:2019 |
Medical electrical equipment - Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
(Exception)
Cl.201.10.4 Lasers and light-emitting diodes (LED)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| IEC 80601-2-49:2018/AMD1:2024 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors
(Exception)
Cl.201.17 Electromagnetic compatibility of ME EQUIPMENT and ME SYSTEMS
Cl.202 Electromagnetic compatibility – Requirements and tests |
Test voltage: Max. 600 V
Test power: Max. 5 kVA
Test frequency: (47 – 63) Hz
Dielectric strength test: Max. AC 5 kV or DC 6 kV
Insulation resistance test: Max. 5 GΩ
Measuring temperature: Max. 300 °C
Ground continuity test: Max. 60 A |
소재지-1 |
| ▶ 전자기적합성 |
| ANSI C63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 ㎑ to 40 ㎓ |
1 phase equipment, ≤ 16 A
CE : 9 ㎑ ~ 30 ㎒
RE : 9 ㎑ ~ 40 ㎓ |
소재지 |
| AS/NZS 61000-6-1: 2006 |
Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential, commercial and light-industrial environments |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m
V-dip: (0 ~ 100) % |
소재지 |
| AS/NZS 61000-6-2: 2006 |
Electromagnetic compatibility (EMC) - General standards - Immunity for industrial environments |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| AS/NZS 61000-6-3:2012 |
Electromagnetic compatibility (EMC) - Part 6.3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| AS/NZS 61000-6-4: 2012 |
Electromagnetic compatibility (EMC) - Part 6.4: Generic standards - Emission standard for industrial environments |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| AS/NZS CISPR 11: 2017 AMD1:2020 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| AS/NZS CISPR 24:AMD1:2017 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m,
EFT/Burst: ± 1 ㎸
Surge: ± 4 ㎸
Magnetic field:: 1 A/m
CS: 0.15 ㎒ ~ 80 ㎒, 3V
V-dip: (0 ~ 100) % |
소재지 |
| AS/NZS CISPR 32:2015/AMD1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements
(Exceptions)
3.1.26 outdoor unit of home satellite receiving systems |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎒ ~ 18 ㎓ |
소재지 |
| CISPR 11:2015+A1:2016+A2:2019 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exceptions)
30 m Test method clause 7.6.7 Electric welding equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| EN 50121-4:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-1-2:2015 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard : Electromagnetic disturbances - Requirements and tests |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-1-2:2015/A1:2021 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances - Requirements and tests |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-10:2015+A1:2016 |
Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-18:2015 |
Particular requirements for the basic safety and essential performance of endoscopic equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-25:2015 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-26:2015 |
Particular requirements for the basic safety and essential performance of electroencephalograph
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-27:2014 |
Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-34:2014 |
Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-36:2015 |
Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-37:2008+A1:2015 |
Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-4:2011+A1:2019 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of cardiac defibrillators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-43:2010+A1:2018 |
Medical electrical equipment – Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-44:2009+A1:2012 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-44:2009+A2:2016 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 50121-3-2:2016/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
(Exception)
Table1. AC power outlet port for public use (IEC 61000-4-30) |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒ |
소재지 |
| ECE Regulation No.10 Revision 5:2014 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
(Exception)
vehicles
4.2. TEM cell testing
4.4. and 4.5 Stripline testing |
RE: 30 ㎒ ∼ 1 ㎓
RI: 80 ㎒ ∼ 2 ㎓
BCI: 20 ㎒ ∼ 200 ㎒
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지 |
| ECE Regulation No.10 Revision 4:2012 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
(Exception)
vehicles
4.2. TEM cell testing
4.4. and 4.5 Stripline testing |
RE: 30 ㎒ ∼ 1 ㎓
RI: 80 ㎒ ∼ 2 ㎓
BCI: 20 ㎒ ∼ 200 ㎒
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 1 A/m
V-dip: (0 ~ 100) % |
소재지 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements
(Exceptions)
3.1.26 outdoor unit of home satellite receiving systems |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎒ ~ 18 ㎓ |
소재지 |
| CISPR 16-2-1:2014+A1:2017 |
Specification for radio disturbance and immunity measuring apparatus and
methods – Part 2-1: Methods of measurement of disturbances and immunity – Conducted
disturbance measurements |
CE: 9 ㎑ ~ 30 ㎒ |
소재지 |
| CISPR 16-1-4:2019 |
Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 1 ㎓ |
소재지 |
| CISPR 14-2:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 230 ㎒, 3 V
V-dip: (0 ~ 100) % |
소재지 |
| CISPR 14-1:2020 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| EN 55032:2015/A1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements
(Exceptions)
3.1.26 outdoor unit of home satellite receiving systems |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓ |
소재지 |
| EN 55035:2017/A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 1 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-1-2:2007 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard : Electromagnetic compatibility - Requirements and tests |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-47:2015 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 60601-2-28:2019 |
Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
See clauses 201.17 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 60601-2-35:2021 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 60601-2-43:2023 |
Medical electrical equipment – Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-3-2:2019 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
1 phase equipment, ≤ 16 A |
소재지 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
1 phase equipment, ≤ 16 A
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test |
1 phase equipment, ≤ 16 A
RS: 80 ㎒ ~ 6 ㎓ |
소재지 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
1 phase equipment, ≤ 16 A
(100 ~ 1000) A/m (Peak) |
소재지 |
| EN 60601-2-57:2011 |
Medical electrical equipment – Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
See clauses 201.17 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-62:2015 |
Medical electrical equipment – Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-63:2015 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-63:2015/A2:2021 |
Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-65:2013 |
Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-65:2013+A2:2021 |
Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and systems – General requirements - Methods of testing and required test results |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 150 ㎑ ~ 2 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 1 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 30 A/m
V-dip: (0 ~ 100) %
LFCS: 50 ㎐ ~ 10 ㎑ |
소재지 |
| EN IEC 60601-2-22:2020 |
Medical electrical equipment – Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 55015:2019+A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 300 ㎒ |
소재지 |
| EN 50130-4:2011+A1:2014 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 3 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 100 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 50155:2021 |
Railway applications - Rolling stock - Electronic equipment
(Exception)
13.4.4 Low temperature start-up test
13.4.5 Dry heat test
13.4.6 Low temperature storage test
13.4.7 Insulation test
13.4.8 Cyclic damp heat test (see NOTE 2)
13.4.10 Shock and vibration test
13.4.10.5 Enclosure protection test (IP code)
13.4.11 Stress screening test
13.4.12 Rapid Temperature variation test
13.4.13 Salt mist test |
Over Voltage(AC/DC): 300 V
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| EN 50498:2010 |
Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles |
RE: 30 ㎒ ∼ 1 ㎓
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지 |
| EN 55011:2016/A2:2021 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exceptions)
30 m Test method clause 7.6.7 Electric welding equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| EN 55024:2010+A1:2015 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement
(Exceptions)
Annex A Telephony terminal equipment |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 4 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 1 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-5:2015 |
Medical electrical equipment Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-54:2009+A1:2015 |
Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 60601-2-54:2009+A2:2019 |
Medical electrical equipmet – Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements –Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1 |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In vitro diagnostic (IVD) medical equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2.7 ㎓, 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN 80601-2-35:2009+A1:2016 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 230 ㎒, 3 V
V-dip: (0 ~ 100) % |
소재지 |
| EN 61000-3-3:2013/A1:2019 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
1 phase equipment, ≤ 16 A |
소재지 |
| EN 61000-4-16:2016 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
15 ㎐ ~ 150 ㎑ |
소재지 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
1 phase equipment, ≤ 16 A
ESD: ± 30 ㎸ |
소재지 |
| ETSI EN 301 489-20 V2.2.1(2021-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stations (MES) used in the Mobile Satellite Services (MSS); |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| ETSI EN 301 489-3 V2.3.2(2023-01) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-5 V2.2.1(2019-04) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA) |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-50 V2.3.1(2021-03) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-52 V1.2.1(2021-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-52 V1.3.1(2024-11) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-6 V2.2.1(2019-04) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 6: Specific conditions for Digital Enhanced Cordless Telecommunications (DECT) equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| EN ISO 80601-2-61:2019 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN ISO 80601-2-56:2017/A1:2020 |
Medical electrical equipment – Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal onditioning |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2- 4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-2 V2.1.1(2019-04) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-19 V2.2.1(2022-04) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band providing positioning, navigation, and timing data |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| ETSI EN 301 489-18 V1.3.1(2002-08) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 18: Specific conditions for Terrestrial Trunked Radio (TETRA) equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| EN IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
1 phase equipment, ≤ 16 A
ESD: ± 30 ㎸ |
소재지 |
| EN 61000-4-39:2017 |
Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test |
1 phase equipment, ≤ 16 A
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒ |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
1 phase equipment, ≤ 16 A
Max. Pulse Voltage: ± 5 ㎸ |
소재지 |
| EN 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
1 phase equipment, ≤ 16 A
Max. Pulse Voltage: ± 7 ㎸ |
소재지 |
| EN 61000-4-6:2014 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
1 phase equipment, ≤ 16 A
CS: 150 ㎑ ~ 230 ㎒: 10 V |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
1 phase equipment, ≤ 16 A
CS: 150 ㎑ ~ 230 ㎒: 10 V |
소재지 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
1 phase equipment, ≤ 16 A
300 A / Continuos
1000 A / Short |
소재지 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exceptions)
30 m Test method clause 7.6.7 Electric welding equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| IEC 60601-2-57:2023 |
Medical electrical equipment – Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring, cosmetic and aesthetic use
See clauses 201.17 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ES-0000-0002 |
한전표준규격 - 전자기적합성시험 일반
(제외사항)
- 각 시험 항목별 시험범위 및 검출한계를 벗어나는 한계값
- 감쇄 진동 자기장 내성시험 (IEC 61000-4-10)
- 상용주파수 전도성 공통모드방해에 대한 내성 (IEC61000-4-16)
- 감쇄 진동서지 내성시험 (IEC 61000-4-18) |
1 phase equipment, ≤ 16 A
RE: 30 ㎒ ~ 6 ㎓
RS: 80 ㎒ ~ 2.7 ㎓, 10 V/m
CE: 9 ㎑ ~ 30 ㎒
ESD: 1 ㎸ ~ 30 ㎸
EFT/Burst, Surge: 4 ㎸
CS: 0.15 ㎒ ~ 230 ㎒, 10 V
MF: 300 A/m
Pulse Magnetic: 300 A/m |
소재지 |
| ETSI EN 301 489-1 V2.1.1(2017-02) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-1 V2.2.3(2019-11) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-13 V1.2.1(2002-08) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 13: Specific conditions for Citizens' Band (CB) radio and ancillary equipment (speech and non-speech) |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-15 V2.2.1(2019-04) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 15: Specific conditions for commercially available amateur radio equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-17 V3.2.4(2020-09) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| ETSI EN 301 489-17 V3.3.1(2024-09) |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| EN 50121-5:2017/A1:2019 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
(Exception)
Table3. Damped Oscillatory Voltage |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 4 ㎸
Surge: ± 4 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
1 phase equipment, ≤ 16 A
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-44:2009+A2:2016 |
Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-45:2011/AMD2:2022 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-47:2012 |
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-5:2009 |
Medical electrical equipment – Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-54:2022 |
Medical electrical equipment – Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-57:2011 |
Medical electrical equipment – Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use
See clauses 201.17 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-34:2011 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-28:2017 |
Medical electrical equipment – Part 2-18: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
See clauses 201.17 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| FCC Part 18 |
INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 40 ㎓ |
소재지 |
| IEC 60571:2012 |
Railway applications-Electronic equipment used on rolling stock
(Exception)
12.2.4 Cold start test
12.2.5 Dry heat test
12.2.6 Damp heat test, cyclic
12.2.10 insulation test
12.2.11 Salt mist test
12.2.12 Vibration, shock and bump test
12.2.13 Watertightness test
12.2.14 Equipment stress screening
12.2.15 Low temperature storage test |
Over Voltage (AC/DC): 300 V
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-1-2:2007 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-1-2:2014 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-1-2:2014+A1:2020 |
Medical electrical equipment – Part 1-2: General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic disturbances – Requirements and tests |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment – Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-10:2012+AMD1:2016+AMD2:2023 |
Medical electrical equipment – Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-18:2009 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-44:2009 |
Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-43:2022 |
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-4:2010+A1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2- 6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61547:2023 |
Equipment for general lighting purposes - EMC immunity requirements |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 1 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 80601-2-26:2020 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 80601-2-30:2019 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 80601-2-49:2019 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V Magnetic field: 30 A/m V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 80601-2-60:2020 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN ISO 15197:2015 |
In vitro diagnostic test systems – Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN ISO 80601-2-55:2018 |
Medical electrical equipment - Part 2-55:Particular requirements for the basic safety and essential performance of respiratory gas monitors
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ETSI EN 301 489-9 V2.1.1(2019-04) |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| FCC Part 15 |
Radio Frequency Devices, Subpart B—UNINTENTIONAL RADIATORS
(Exception)
15.31 Noise figure |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 40 ㎓ |
소재지 |
| IEC 60601-2-34:2024 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-35:2020 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-35:2020+A1:2023 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-36:2014 |
Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-37:2007 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-37:2007+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-37:2024 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-19:2020 |
Medical electrical equipment – Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-19:2020+A1:2023 |
Medical electrical equipment – Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes - EMC immunity requirements |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 1 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
(Exception)
Table1. AC power outlet port for public use (IEC 61000-4-30) |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒ |
소재지 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
(Exception)
Table3. Damped Oscillatory Voltage |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 4 ㎸
Surge: ± 4 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 80601-2-26:2019 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograph
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 80601-2-26:2019+A1:2024 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalograph
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 80601-2-30:2018 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
1 phase equipment, ≤ 16 A
(100 ~ 1 000) A/m (Peak) |
소재지 |
| IEC 60601-2-63:2012+A1:2017 |
Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-63:2012+A1:2017+A2:2021 |
Medical electrical equipment – Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-65:2012+A1:2017 |
Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-65:2012+A1:2017+A2:2021 |
Medical electrical equipment – Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60945:2002/COR1:2008 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 150 ㎑ ~ 2 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 1 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 30 A/m
V-dip: (0 ~ 100) %
LFCS: 50 ㎐ ~ 10 ㎑ |
소재지 |
| IEC 61000-3-2:2018+A1:2020 |
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
1 phase equipment, ≤ 16 A |
소재지 |
| IEC 61000-3-3:2013+A1:2017 |
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
1 phase equipment, ≤ 16 A |
소재지 |
| IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-5: Particular requirements – Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-2:2017+A1:2023 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-22:2019 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-24:2012 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-25:2011 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-27:2011 |
Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 60601-2-27:2011+COR1:2012 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9610-6-2:2019 |
전자파적합성(EMC) — 제6-2부: 일반표준 — 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
단상 16 A 이하
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓,
max. 10 V/m
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards: Emission standard for residential |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-1: Particular requirements – Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-2: Particular requirements – Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-3: Particular requirements – Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2-4: Particular requirements – Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15㎒ ~ 80 ㎒, 3 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 2- 6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9610-6-3:2023 |
전자파적합성(EMC) — 제6-3부: 일반 표준 — 주거용, 상업용 및 경공업 환경에서의 전자파 방출 표준 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) — 제4-2부: 시험 및 측정기술 — 정전기 방전 내성 시험 |
단상 16 A 이하
ESD: ± 30 ㎸ |
소재지 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) — 제4-3부: 시험 및 측정기술 — 방사성 RF 전자기장 내성 시험 |
단상 16 A 이하
RS: 80 ㎒ ~ 6 ㎓ |
소재지 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) — 제4-4부: 시험 및 측정기술 — 전기적 빠른 과도현상, 버스트 내성 시험 |
단상 16 A 이하
Max. Pulse Voltage: ± 5 ㎸ |
소재지 |
| KS C 9610-4-5:2020 |
전자파적합성(EMC) — 제4-5부: 시험 및 측정기술 — 서지 내성 시험 |
단상 16 A 이하
Max. Pulse Voltage: ± 7 ㎸ |
소재지 |
| KS C 9610-4-5:2023 |
전자파적합성(EMC) — 제4-5부: 시험 및 측정기술 — 서지 내성 시험 |
단상 16 A 이하
Max. Pulse Voltage: ± 7 ㎸ |
소재지 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) — 제4-6부: 시험 및 측정기술 — 전도성 RF 전자기장 내성 시험 |
단상 16 A 이하
150 ㎑ ~ 230 ㎒: 10 V |
소재지 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) — 제4-8부: 시험 및 측정기술 — 전원 주파수 자기장 내성 시험 |
단상 16 A 이하
300 A / Continuos
1 000 A / Short |
소재지 |
| KS C 9610-4-9:2019 |
전자파적합성(EMC) — 제4-9부:시험 및 측정기술 — 임펄스 자기장 내성 시험 |
단상 16 A 이하
(100 ~ 1 000) A/m (Peak) |
소재지 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) — 제6-1부: 일반표준 — 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
단상 16 A 이하
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m V-dip: (0 ~ 100) % |
소재지 |
| KRS SG 0038-24(R):2024 |
무절연 가청주파수(AF)궤도회로
4.5.3 전기자기 적합성(EMC) 시험
KS C IEC 62236-4 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 10 V
MF: 300 A/m |
소재지 |
| KRS SG 0038-21(R):2021 |
무절연 가청주파수(AF)궤도회로
4.5.3 전기자기 적합성(EMC) 시험
IEC 62236-4 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 10 V
MF: 300 A/m |
소재지 |
| IEC 80601-2-78:2019 |
Medical electrical equipment –Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 80601-2-78:2019+A1:2024 |
Medical electrical equipment –Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ISO 11452-2:2004 |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure |
RI: 80 ㎒ ~ 2 ㎓, Below 30 V/m |
소재지 |
| ISO 15197:2013 |
In vitro diagnostic test systems – Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ISO 7637-2:2004 |
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only |
12 V, 24 V System |
소재지 |
| ISO 7637-2:2004+A1:2008 |
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only |
12 V, 24 V System |
소재지 |
| ISO 7637-2:2011 |
Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only |
12 V, 24 V System |
소재지 |
| ISO 7637-3:2016 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
12 V, 24 V System |
소재지 |
| ISO 80601-2-55:2018 |
Medical electrical equipment – Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) — 제4-11부: 시험 및 측정 기술 — 전압 강하, 순간 정전, 전압 변동 내성 시험 |
단상 16 A 이하 |
소재지 |
| KS C 9610-3-3:2020 |
전자파적합성(EMC) — 제3-3부: 허용기준 — 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준(상당 16 A 이하 기기) |
단상 16 A 이하 |
소재지 |
| IEC 61000-4-17:1999+A2:2008 |
Testing and measurement techniques - Ripple on d.c. input power port immunity test |
1 phase equipment, ≤ 16 A
DC 425 V |
소재지 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
1 phase equipment, ≤ 16 A
ESD: ± 30 ㎸ |
소재지 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
1 phase equipment, ≤ 16 A
ESD: ± 30 ㎸ |
소재지 |
| IEC 61000-4-29:2000 |
Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
1 phase equipment, ≤ 16 A
DC 425 V |
소재지 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency electromagnetic field immunity test |
1 phase equipment, ≤ 16 A
RS: 80 ㎒ ~ 6 ㎓ |
소재지 |
| IEC 61000-4-39:2017 |
Electromagnetic compatibility (EMC) - Part 4-39: Testing and measurement techniques - Radiated fields in close proximity - Immunity test |
1 phase equipment, ≤ 16 A
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒ |
소재지 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
1 phase equipment, ≤ 16 A
Max. Pulse Voltage: ± 5 ㎸ |
소재지 |
| IEC 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
1 phase equipment, ≤ 16 A
Max. Pulse Voltage: ± 7 ㎸ |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbance, induced by radio-frequency fields |
1 phase equipment, ≤ 16 A
CS: 150 ㎑ ~ 230 ㎒, 10 V |
소재지 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
1 phase equipment, ≤ 16 A
300 A / Continuos
1 000 A / Short |
소재지 |
| IEC 80601-2-49:2018+A1:2024 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KRS SG 0054-21(R):2021 |
단선 자동폐색제어장치
4.2.2 시험의 방법
6) 전자기 적합성(EMC) 시험
KS C IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0054-24(R):2024 |
단선 자동폐색제어장치
4.2.2 시험의 방법
6) 전자기 적합성(EMC) 시험
KS C IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0055-21(R):2021 |
복선 자동폐색제어장치
4.2.2 시험방법
6) 전자기 적합성(EMC) 시험
KS C IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0055-24(R):2024 |
복선 자동폐색제어장치
4.2.2 시험방법
6) 전자기 적합성(EMC) 시험
KS C IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0067-14 |
지상 신호설비 시험방법
4.3.4 전기자기 적합성(EMC) 시험
IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0067-24(R):2024 |
지상 신호설비 시험방법
4.3.4 전기자기 적합성(EMC) 시험
IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KS C 9547:2020 |
일반 조명기기 — 전자파적합성(EMC) 내성 요구사항 |
1 phase equipment, ≤ 16 A
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 1 ㎓, 3 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 3 V
Magnetic field: 3 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9610-3-2:2020 |
전자파적합성(EMC) — 제3-2부: 허용기준 — 고조파 전류의 허용기준(상당 입력 전류 16 A이하 기기) |
단상 16 A 이하 |
소재지 |
| ISO 80601-2-55:2018+A1:2023 |
Medical electrical equipment – Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ISO 80601-2-56:2017+AMD1:2018 |
Medical electrical equipment – Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법
(제외사항)
30 m 시험법
7.6.8 아크 용접 기기 |
단상 16 A 이하
CE:9 ㎑ ~ 30 ㎒
RE:9 ㎑ ~ 18 ㎓ |
소재지 |
| KS C 9610-6-4:2022 |
전자파적합성(EMC) — 제6-4부: 일반 표준 — 산업 환경에서의 전자파 방출 표준 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| KS X 3126:2020 |
무선 데이타 통신 시스템용 특정 소출력 무선기기 전자파적합성 시험방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3127:2014 |
간이 무선국 전자파 적합성 시험 방법 |
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| KS X 3128:2014 |
디지털 코드 없는 전화기 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| QCVN 96:2015/BTTTT |
QUY CHUẨN KỸ THUẬTQUỐC GIA
VỀ TƯƠNG THÍCH ĐIỆN TỪ ĐỐI VỚI THIẾT BỊ VÔ TUYẾN CỰ LY NGẮN DẢI TẦN TỪ 9 kHz ĐẾN 40 GHz
National technical regulation
on electromagnetic compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| QCVN 86:2019/BTTTT |
QUY CHUẨN KỸ THUẬT QUỐC GIA
VỀ TƯƠNG THÍCH ĐIỆN TỪ CHO THIẾT BỊ ĐẦU CUỐI VÀ PHỤ TRỢ TRONG HỆ THỐNG THÔNG TIN DI ĐỘNG
National technical regulation
on electromagnetic compatibility for mobile terminals and ancillary equipment of digital cellular telecommunication systems |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| QCVN 18:2022/BTTTT |
QUY CHUẨN KỸ THUẬT QUỐC GIA
VỀ TƯƠNG THÍCH ĐIỆN TỪ ĐỐI VỚI THIẾT BỊ THÔNG TIN VÔ TUYẾN ĐIỆN
National technical regulation
on Electromagnetic Compatibility for Radio Equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| QCVN 118:2018/BTTTT |
QUY CHUẨN KỸ THUẬT QUỐC GIA
TƯƠNG THÍCH ĐIỆN TỪ CHO THIẾT BỊ ĐA PHƯƠNG TIỆN - YÊU CẦU PHÁT XẠ
National technical regulation
on Electromagnetic compatibility of multimedia equipment -
Emission requirements |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎒ ~ 18 ㎓ |
소재지 |
| QCVN 112:2017/BTTTT |
QUY CHUẨN KỸ THUẬT QUỐC GIA
VỀ TƯƠNG THÍCH ĐIỆN TỪ ĐỐI VỚI THIẾT BỊ VÔ TUYẾN TRUYỀN DỮ LIỆU BĂNG RỘNG
National technical regulation
on general electromagnetic compatibility for radio broadband data transmission equipment |
1 phase equipment, ≤ 16 A
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| VCCI-CISPR 32:2016 |
Electromagnetic compatibility of multimedia equipment – Emission requirements |
1 phase equipment, ≤ 16 A
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| KS X 3140:2014/KS C IEC 60533 |
해상용 항해 기기 및 무선 통신 기기의 전자파 적합성 시험 방법 / 선박용 전기 설비 – 전기자기 적합성 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 150 ㎑ ~ 2 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 2 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 1 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 30 A/m
V-dip: (0 ~ 100) %
LFCS: 50 ㎐ ~ 10 ㎑ |
소재지 |
| KS X 3139:2014 |
이동 위성 업무 기기의 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3137:2014 |
무선 호출용 기기의 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3136:2014 |
아마추어 무선국 기기 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3135:2020 |
이동통신 기지국, 중계기, 보조기기의 전자파적합성 시험방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3132:2014 |
TRS 기기 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3131:2014 |
생활 무전기 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3130:2014 |
음성 및 음향 신호 전송용 특정 소출력 무선 기기 전자파 적합성 시험 방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100 ) % |
소재지 |
| KS X 3129:2020 |
이동통신 단말기 및 보조기기의 전자파적합성 시험방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기 기기, 전동 공구 및 유사 기기의 요구사항 - 제1부: 방출 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 9 ㎑ ~ 6 ㎓ |
소재지 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기의 요구사항 - 제2부: 내성 - 제품군 규격 |
단상 16 A 이하
ESD: ± 30 ㎸
RS: 80 ㎒ ~ 6 ㎓, 10 V/m
EFT/Burst: ± 1 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 230 ㎒, 3 V
M/F: 10 A/m
V-dip: (0 ~ 100) % |
소재지 |
| ISO 80601-2-61:2017 |
Particular requirements for basic safety and essential performance of pulse oximeter equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KRS CS 0003-21(R):2021 |
철도차량 차상신호장치 시험방법
4.3 시험
아. 전기자기 적합성(EMC) 시험
IEC 62236-3-2 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒ |
소재지 |
| KRS CS 0003-24(R):2024 |
철도차량 차상신호장치 시험방법
4.3 시험
아. 전기자기 적합성(EMC) 시험
IEC 62236-3-2 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒ |
소재지 |
| KRS SG 0015-23(R) |
전자연동장치
4.7.3 전기자기 적합성(EMC) 시험
시험 방법 및 기준은 KRS SG 0067에 따른다 (IEC 62236-4) |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒, 10 V
MF: 300 A/m |
소재지 |
| KRS SG 0033-21(R):2021 |
유절연 가청주파수(AF) 궤도회로
4.2.2 시험의 방법
6) 전기자기적합성 시험
IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0033-24(R):2024 |
유절연 가청주파수(AF) 궤도회로
4.2.2 시험의 방법
5) 전기자기적합성 시험
IEC 62236-4 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0036-22(R) |
궤도회로 기능감시장치
4.2.2 시험의 방법 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KRS SG 0036-25(R):2025 |
궤도회로 기능감시장치
4.2.2 시험의 방법 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| IEC 60601-2-62:2013 |
Medical electrical equipment – Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
See clauses 201.17 and 202 in the standard. |
1 phase equipment, ≤ 16 A
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3125:2020 |
특정 소출력 무선기기 전자파적합성 시험방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS X 3124:2020 |
무선기기의 공통 전자파적합성 시험방법 |
단상 16 A 이하
CE: 150 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 1 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS C IEC 62236-5:2018 |
철도 적용 – 전자기 적합성－제5부：고정 전력공급 설비와 기기의 방출 및 내성
(제외항목)
표3. 3.2 감쇠 진동 전압 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 4 ㎸
Surge: ± 4 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C IEC 62236-4:2018 |
철도 적용 – 전자기 적합성 - 제4부: 신호 및 통신 기기의 방출 및 내셩 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
Magnetic field: 300 A/m |
소재지 |
| KS C IEC 62236-3-2:2018 |
철도 적용 – 전자기 적합성 - 제3-2부：철도 차량－기기 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒ |
소재지 |
| KS C IEC 60601-1-2:2020 |
의료용 전기기기 - 제1-2부 : 기본안전 및 필수성능에 관한 일반 요구사항 – 보조 표준 : 전자파 방해 - 요구사항 및 시험 |
단상 16 A 이하
CE: 0.15 ㎒ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
ESD: ± 15 ㎸
Radiated fields in close proximity: 9 ㎑ ~ 13.56 ㎒
RS: 80 ㎒ ~ 6 ㎓
EFT/Burst: ± 2 ㎸
Surge: ± 2 ㎸
CS: 0.15 ㎒ ~ 80 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C IEC 60571:2012 |
철도 적용 – 철도 차량용 전자기기
(제외사항)
12.2.4 냉각 시험
12.2.5 내열설 시험
12.2.6 내습 사이클 시험
12.2.10 절연 시험
12.2.11 염수 분무 시험
12.2.12 진동, 충격 및 충돌 시험
12.2.13 방수 시험
12.2.14 장비 응력 스크리닝
12.2.15 저온 저장 시험 |
Over Voltage (AC/DC): 300 V
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 ㎓
ESD: ± 8 ㎸
RS: 80 ㎒ ~ 6 ㎓
EFT: ± 2 ㎸
Surge: ± 2 ㎸
CS: 150 ㎑ ~ 80 ㎒
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9990:2017 |
자동차 및 내연기관 구동기기류 등에 대한 전자파적합성(EMC) 시험방법
(제외사항)
스트립선로 시험, 회전자기(TEM) 셀시험 |
RE: 30 ㎒ ∼ 1 ㎓
RI: 80 ㎒ ∼ 2 ㎓
BCI: 20 ㎒ ∼ 200 ㎒
CTI: Pulse 1, 2a, 2b, 3a, 3b, 4
CTE: 12 V, 24 V System |
소재지 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
단상 16 A 이하
RS: 80 ㎒ ~ 2.7 ㎓, 10 V/m
: 1.8 ㎓, 2.6 ㎓, 3.5 ㎓, 5.0 ㎓ , 3 V/m
ESD: ± 30 ㎸
EFT/Burst: ± 4 ㎸
Surge: ± 4 ㎸
CS: 0.15 ㎒ ~ 230 ㎒, 10 V
Magnetic field: 30 A/m
V-dip: (0 ~ 100) % |
소재지 |
| KS C 9832:2024 |
멀티미디어기기 전자파적합성 – 방출 요구사항 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓ |
소재지 |
| KS C 9832:2023 |
멀티미디어기기 전자파적합성 – 방출 요구사항 |
단상 16 A 이하
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓ |
소재지 |
| IEC 61000-4-16:2015 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
15 ㎐ ~ 150 ㎑ |
소재지 |
| ▶ 에너지효율 |
| 10 CFR Part 430 Subpart B, Appendix H |
Electronic Code of Federal Regulations (Uniform Test Method for Measuring the Power Consumption of Television Sets) |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| 10 CFR Part 430 Subpart B, Appendix Y |
Electronic Code of Federal Regulations (Uniform Test Method for Measuring the Energy Consumption of Battery Chargers) |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| 10 CFR Part 430 Subpart B, Appendix Z |
Electronic Code of Federal Regulations (Uniform Test Method for Measuring the Energy Consumption of External Power Supplies) |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| EN 50563:2011 |
External a.c. d.c. and a.c. a.c. power supplies – Determination of no-load power and average efficiency of active modes |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| EN 50563:2011+A1:2013 |
External a.c. - d.c. and a.c. - a.c. power supplies - Determination of no-load power and average efficiency of active modes |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| EN 50564:2011 |
Electrical and electronic household and office equipment - Measurement of low power consumption |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| IEC 62087-1:2015 |
Audio, video, and related equipment - Determination of power consumption - Part 1: General |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| IEC 62087-2:2015 |
Audio, video, and related equipment - Determination of power consumption – Part 2: Signals and media |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| IEC 62087-3:2015 |
Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| IEC 62087-4:2015 |
Audio, video, and related equipment - Determination of power consumption - Part 4: Video recording equipment |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| IEC 62087-6:2015 |
Audio, video, and related equipment - Determination of power consumption - Part 6: Audio equipment |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| IEC 62301:2011 |
Household electrical appliances - Measurement of standby power |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| KS C IEC 62301:2011 |
가정용 전기기기의 대기전력 측정방법 |
Test voltage: Max. 600 Vac
Test power: Max. 5 kVA
Test frequency: (47 - 63) Hz
Input current Max. 20 A |
소재지-1 |
| 기후에너지환경부고시 제2026-25호(2026.1.23.) |
대기전력저감 프로그램 운용규정
8. 자동절전 제어장치
10. 오디오
11. DVD 플레이어
12. 라디오 카세트
13. 전자레인지
15. 도어폰
16. 유무선전화기
20. 손건조기
21. 서버
23. 유무선공유기 |
시험 전원: Max. 600 V, Max. 5 kVA
시험 주파수 : 47 Hz ~ 63 Hz
입력전류 : Max. 20 A |
소재지-1 |
| 기후에너지환경부고시 제2026-137호(2026.5.27.) |
효율관리기자재 운용규정
20. 어댑터 · 충전기
26. 텔레비전수상기
42. 사이니지 디스플레이
44. 모니터
49. 컴퓨터 |
시험 전원 : Max. 600 V, Max. 5 kVA
시험 주파수 : 47 Hz ~ 63 Hz
입력전류 : Max. 20 A |
소재지-1 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-14:2023 |
환경시험 - 제2-14부: 시험 – 시험 N: 온도 변화
(제외사항)
8.2.3 가혹도
3 K/min,
5 K/min,
10 K/min,
15 K/min,
20 K/min,
25 K/min
9. 시험 Nc: 온도의 급변(2욕조법) |
온도: -40 ℃ ~ 100 ℃ |
소재지 |
| EN 61373:2010 |
Railway applications-rolling stock equipment-shock and vibration tests |
진동주파수: 2 Hz ~ 500 Hz
최대가속도: 1 000 ㎨ |
소재지 |
| EN 60068-2-1:2007 |
Environmental testing – Part 2-1: Tests – Test A: Cold
(Exception)
6.6.1 Temperature
-50 ℃, -55 ℃, -65 ℃ |
온도: -40 ℃ ~ 5 ℃ |
소재지 |
| MIL-STD-810G:2014 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
METHOD 501.6 High Temperature
METHOD 502.6 Low Temperature
METHOD 503.6 Temperature Shock
METHOD 507.6 Humidity
METHOD 514.7 Vibration
(Exception)
Category 5, Category 6
METHOD 516.7 Shock
(Exception)
Procedure VII, Procedure VIII |
온도: -61 ℃ ~ 90 ℃
습도: Max. 98 % R.H.
진동주파수: 1 Hz ~ 2 000 Hz
가속도: Max. 735 ㎨ |
소재지 |
| IEC 60068-2-64:2008+A1:2019 |
Environmental testing Part 2-64: Tests Test Fh: Vibration, broadband random and guidance
(Exception)
8.4.1 General – Non-Gaussian vibration testing, Figure 5 |
진동주파수: 1 Hz ~ 2 200 Hz
최대가속도: 980 ㎨ |
소재지 |
| KS C IEC 62498-3:2010 |
철도 적용 – 장비의 환경 조건 – 제3부: 신호 및 통신용 장비
4.13 진동 및 충격 |
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 1 000 ㎨ |
소재지 |
| IEC 60529:1989+A1:1999+A2:2013 |
Degrees of protection provided by enclosures (IP Code)
(Exception)
IPX9 |
IP1X, IP2X, IP3X, IP4X, IP5X, IP6X
IPX3, IPX4, IPX5, IPX6, IPX7, IPX8 |
소재지 |
| IEC 60571:2012 |
Railway applications – Electronic equipment used on rolling stock
(Exception)
12.2.7 Supply overvoltage
12.2.8 Surges, electrostatic discharge (ESD) and transient burst susceptibility tests
12.2.9 Radio frequency test
12.2.11 Salt mist test
12.2.14 Equipment stress screening |
온도: -40 ℃ ~ 85 ℃
진동주파수: 2 Hz ~ 500 Hz
습도: Max. 98 % R.H.
절연저항: DC 500 V
절연내력: Max. AC 1 500 V
가속도: Max. 1 000 ㎨ |
소재지 |
| KS R 9187:2021 |
철도 신호 보안 부품 – 충격 시험 방법
(제외사항)
5종 A종, 5종 B종, 5종 C종 |
최대가속도: 1 180 ㎨ |
소재지 |
| KS R 9186:2021 |
철도 신호 보안 부품 – 진동 시험방법 |
진동주파수: 10 Hz ~ 1 000 Hz
최대가속도: 1 180 ㎨ |
소재지 |
| IEC 60068-2-1:2007 |
Environmental testing – Part 2-1: Tests – Test A: Cold
(Exception)
6.6.1 Temperature
-50 ℃, -55 ℃, -65 ℃ |
온도: -40 ℃ ~ 5 ℃ |
소재지 |
| IEC 60068-2-1:2025 |
Environmental testing – Part 2-1: Tests – Test A: Cold
(Exception)
6.2.2 Low conditioning Temperature TA
-50 ℃, -55 ℃, -65 ℃ |
온도: -40 ℃ ~ 5 ℃ |
소재지 |
| KS R 9144:2021 |
철도 차량 부품의 진동 시험방법
6. 시험방법
6.1 공진시험
6.2 진동 기능 시험
6.3 진동 내구 시험 |
진동주파수: 1 Hz ~ 70 Hz
최대가속도: 490 ㎨ |
소재지 |
| KS R 1034:2023 |
자동차 부품 진동 시험 방법 |
진동주파수: 5 Hz ~ 2 000 Hz
가속도: Max. 490 ㎨ |
소재지 |
| SPS-KEMC 1120-0579:2018 |
디지털 보호계전기
6.3.1 절연저항 측정
6.3.2 상용주파 내전압 시험
6.7 내환경 시험 |
절연저항: DC 500 V
내전압: Max. AC 3 000 V
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H. |
소재지 |
| EN 50125-3:2003 |
Railway applications - Environmental conditions for equipment - Part3 : Equipment for signalling and telecommunications
4.13 Vibrations and shocks |
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 1 000 ㎨ |
소재지 |
| IEC 60068-2-14:2023 |
Environmental testing – Part 2-14: Tests – Test N: Change of temperature
(Exception)
8.2.3 Severities
3 K/min,
5 K/min,
10 K/min,
15 K/min,
20 K/min,
25 K/min
9. Test Nc: Rapid change of temperature, two-fluid-bath method |
온도: -40 ℃ ~ 100 ℃ |
소재지 |
| KS C 7620:2003 |
철도 차량용 형광등 기구
(제외사항)
7.2 특성시험
7.9 소음시험
7.11 광속비 시험
7.13 잡음의 세기 시험 |
전압: DC 24 V, DC 100 V
온도상승: (0 ~ 100) ℃
절연저항: DC 500 V, 4 000 ㏁ |
소재지 |
| KS C 5078:2015 |
자동차용 영상 사고기록장치
7.3 내환경시험 |
온도: -20 ℃ ~ 85 ℃
진동주파수: 5 Hz ~ 200 Hz
가속도 : Max. 490 ㎨ |
소재지 |
| KRSA-4001-R3 |
ATP 지상장치
5. 검사 및 시험
(제외사항)
5.4 전자파 적합성 시험
5.5 방진 및 방수시험
-살수시험 (KS R 9189) |
온도: -40 ℃ ~ 90 ℃
습도: Max. 98 % R.H.
절연저항: DC 500 V
절연내력: Max. AC 1 500 V
진동주파수: 5 Hz ~ 2 000 Hz
가속도: Max. 1 000 ㎨
IP68 |
소재지 |
| IEC 60068-2-6:2007 |
Environmental testing – Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
진동주파수: 1 Hz ~ 2 000 Hz
가속도: Max. 980 ㎨ |
소재지 |
| KS C IEC 60068-2-27:2008 |
환경 시험－제2-27부 : 시험－시험 Ea와 지침：충격
(제외사항)
첨두 가속도(A) 2 000 ㎨ 이상 |
최대가속도: 1 000 ㎨ |
소재지 |
| KS C IEC 60068-2-2:2007 |
환경 시험 - 제2-2부 : 시험 - 시험B: 내열성시험
(제외사항)
6.5.2온도
125 ℃, 155 ℃, 175 ℃, 200 ℃, 250 ℃, 315 ℃, 400 ℃, 500 ℃, 630 ℃, 800 ℃, 1 000 ℃ |
온도: 30 ℃ ~ 100 ℃ |
소재지 |
| MIL-STD-202H:2015 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS
Method 103 HUMIDITY (STEADY STATE)
Method 107 THERMAL SHOCK TABLE I
Method 201 VIBRATION
Method 204 VIBRATION, HIGH FREQUENCY
Method 214 RANDOM VIBRATION |
습도: Max. 95 % R.H.
온도: -40 ℃ ~ 70 ℃
진동주파수: 1 Hz ~ 2 000 Hz
랜덤진동주파수: 50 Hz ~ 2 000 Hz |
소재지 |
| MIL-STD-202G:2013 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS
Method 103B HUMIDITY (STEADY STATE)
Method 107G THERMAL SHOCK TABLE 107-I
Method 201A VIBRATION
Method 204D VIBRATION, HIGH FREQUENCY
Method 214A RANDOM VIBRATION |
습도: Max. 95 % R.H.
온도: -40 ℃ ~ 70 ℃
진동주파수: 1 Hz ~ 2 000 Hz
랜덤진동주파수: 50 Hz ~ 2 000 Hz |
소재지 |
| MIL-STD-167-1A:2005 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE I – ENVIRONMENTAL) |
진동주파수: 4 Hz ~ 33 Hz
가속도: Max. 980 ㎨ |
소재지 |
| EN 60068-2-64:2008+A1:2019 |
Environmental testing – Part 2-64: Tests Test Fh: Vibration, broadband random and guidance
(Exception)
8.4.1 General – Non-Gaussian vibration testing, Figure 5 |
진동주파수: 1 Hz ~ 2 200 Hz
최대가속도: 980 ㎨ |
소재지 |
| EN 60068-2-6:2008 |
Environmental testing – Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
진동주파수: 1 Hz ~ 2 000 Hz
가속도: Max. 980 ㎨ |
소재지 |
| EN IEC 60068-2-38:2021 |
Environmental testing – Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test |
온도: -10 ℃ ~ 65 ℃
습도: Max. 98 % R.H. |
소재지 |
| EN 60068-2-30:2005 |
Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
온도: Max. 55 ℃
습도: Max. 98 % R.H. |
소재지 |
| EN 60068-2-27:2009 |
ENVIRONMENTAL TESTING - Part 2-27 : Tests – Test Ea and guidance : Shock
(Exception)
Peak acceleration(A) more than 2 000 ㎨ |
최대가속도: 1 000 ㎨ |
소재지 |
| EN IEC 60068-2-14:2023 |
Environmental testing – Part 2-14: Tests – Test N: Change of temperature
(Exception)
8.2.3 Severities
3 K/min,
5 K/min,
10 K/min,
15 K/min,
20 K/min,
25 K/min
9. Test Nc: Rapid change of temperature, two-fluid-bath method |
온도: -40 ℃ ~ 100 ℃ |
소재지 |
| EN 60068-2-2:2007 |
Environmental testing – Part 2-2: Tests – Test B: Dry heat
(Exception)
6.5.2 Temperature
125 ℃, 155 ℃, 175 ℃, 200 ℃, 250 ℃, 315 ℃, 400 ℃, 500 ℃, 630 ℃, 800 ℃, 1 000 ℃ |
온도: 30 ℃ ~ 100 ℃ |
소재지 |
| IEC 60068-2-78:2012 |
Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state |
온도: Max. 55 ℃
습도: Max. 95 % R.H. |
소재지 |
| IEC 60068-2-78:2025 |
Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state |
온도: Max. 55 ℃
습도: Max. 95 % R.H. |
소재지 |
| KS C IEC 60068-2-1:2007 |
환경시험 - 제2-1부: 시험-시험A: 내한성시험
(제외사항)
6.6.1온도
-50 ℃, -55 ℃, -65 ℃ |
온도: -40 ℃ ~ 5 ℃ |
소재지 |
| KS C IEC 60068-2-14:2009 |
환경시험 - 제2-14부: 시험 - 시험 N: 온도 변화
(제외사항)
8.2.3 가혹도
(3 ± 0.6) K/min,
(5 ± 1) K/min,
(10 ± 2) K/min,
(15 ± 3) K/min
9. 시험 Nc: 온도의 급변(2욕조법) |
온도: -40 ℃ ~ 100 ℃ |
소재지 |
| IEC 61373:2010 |
Railway applications – rolling stock equipment-shock and vibration tests |
진동주파수: 2 Hz ~ 500 Hz
최대가속도: 1 000 ㎨ |
소재지 |
| EN IEC 60068-2-30:2025 |
Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
온도: Max. 55 ℃
습도: Max. 98 % R.H. |
소재지 |
| EN IEC 60068-2-2:2025 |
Environmental testing – Part 2-2: Tests – Test B: Dry heat
(Exception)
6.2.2 High conditioning Temperature TB
125 ℃, 155 ℃, 175 ℃, 200 ℃, 250 ℃, 315 ℃, 400 ℃, 500 ℃, 630 ℃, 800 ℃, 1 000 ℃ |
온도: 30 ℃ ~ 100 ℃ |
소재지 |
| EN IEC 60068-2-1:2025 |
Environmental testing – Part 2-1: Tests – Test A: Cold
(Exception)
6.2.2 Low conditioning Temperature TA
-50 ℃, -55 ℃, -65 ℃ |
온도: -40 ℃ ~ 5 ℃ |
소재지 |
| KS C IEC 60068-2-64:2019 |
환경 시험 – 제2-64부: 시험 – 시험 Fh: 광대역 랜덤 진동 시험 및 지침 |
진동주파수:
1 Hz ~ 2 200 Hz
최대가속도: 980 ㎨ |
소재지 |
| IEC 60068-2-2:2025 |
Environmental testing – Part 2-2: Tests – Test B: Dry heat
(Exception)
6.2.2 High conditioning Temperature TB
125 ℃, 155 ℃, 175 ℃, 200 ℃, 250 ℃, 315 ℃, 400 ℃, 500 ℃, 630 ℃, 800 ℃, 1 000 ℃ |
온도: 30 ℃ ~ 100 ℃ |
소재지 |
| IEC 60068-2-27:2008 |
ENVIRONMENTAL TESTING - Part 2-27 : Tests – Test Ea and guidance : Shock
(Exception)
Peak acceleration(A) more than 2 000 ㎨ |
최대가속도: 1 000 ㎨ |
소재지 |
| KS C IEC 60571:2012 |
철도 적용 – 철도 차량용 전자기기
(제외사항)
12.2.7 공급 과전압
12.2.8 서지, 정전기 방전과 버스트 민감성 시험
12.2.9 무선 주파수시험
12.2.11 염분 분무시험
12.2.14 장비 응력 스크리닝 |
온도: -40 ℃ ~ 85 ℃
진동주파수: 2 Hz ~ 500 Hz
습도: Max. 98 % R.H.
절연저항: DC 500 V
절연내력: Max. AC 1 500 V
가속도: Max. 1 000 ㎨ |
소재지 |
| KS C IEC 61373:2010 |
철도 적용 - 철도차량 장치 - 충격 및 진동시험 |
진동주파수: 2 Hz ~ 500 Hz
최대가속도: 1 000 ㎨ |
소재지 |
| MIL-STD-810F:2000 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD FOR ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS (NOTICE 1 : 2000 + NOTICE 2 : 2002 + NOTICE 3 : 2003)
METHOD 501.4 High Temperature
METHOD 502.4 Low Temperature
METHOD 503.4 Temperature Shock
METHOD 507.4 Humidity
METHOD 514.5 Vibration
(Exception)
Category 5, Category 6
METHOD 516.5 Shock
(Exception)
Procedure VII, Procedure VIII |
온도: -61 ℃ ~ 90 ℃
습도: Max. 95 % R.H.
진동주파수: 1 Hz ~ 2 000 Hz
가속도: Max. 735 ㎨ |
소재지 |
| KS R 9193:2022 |
철도 신호 보안 부품의 절연 저항 및 내전압 시험 방법 |
절연저항: Max. DC 500 V
내전압: Max. AC 5 000 V |
소재지 |
| KS R 9197:2022 |
철도 차량의 절연저항 및 내전압 시험 방법 |
절연저항: Max. DC 1 000 V
내전압: Max. AC 5 000 V |
소재지 |
| EN 60529:1991+A1:2000+A2:2013 |
Degrees of protection provided by enclosures (IP Code)
(Exception)
IPX9 |
IP1X, IP2X, IP3X, IP4X,
IP5X, IP6X
IPX3, IPX4, IPX5, IPX6, IPX7, IPX8 |
소재지 |
| EN 60068-2-78:2013 |
Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state |
온도: Max. 55 ℃
습도: Max. 95 % R.H. |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경 시험 – 제2-30부: 시험-시험 Db와 지침: 주기적 내습 (12 h + 12 h 주기) |
온도: Max. 55 ℃
습도: Max. 98 % R.H. |
소재지 |
| KS C IEC 60068-2-38:2021 |
환경 시험 – 제2-38부: 시험 – 시험 Z/AD: 복합 온도/습도 사이클 시험 |
온도: -10 ℃ ~ 65 ℃
습도: Max. 98 % R.H. |
소재지 |
| KS C IEC 60068-2-6:2015 |
환경 시험 – 제2-6부: 시험 – 시험 Fc: 진동(정현파) |
진동주파수: 1 Hz ~ 2 000 Hz
가속도: Max. 980 ㎨ |
소재지 |
| KS C IEC 60068-2-78:2012 |
환경 시험 – 제2-78부: 시험 – 시험 Cab: 안전 상태의 내습성 시험 |
온도: Max. 55 ℃
습도: Max. 95 % R.H. |
소재지 |
| KS C IEC 60529:2013 |
외함의 밀폐 보호등급 구분(IP코드)
(제외사항)
IPX9 |
IP1X, IP2X, IP3X, IP4X,
IP5X, IP6X
IPX3, IPX4, IPX5, IPX6, IPX7, IPX8 |
소재지 |
| IEC 60068-2-38:2021 |
Environmental testing – Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test |
온도: -10 ℃ ~ 65 ℃
습도: Max. 98 % R.H. |
소재지 |
| IEC 60068-2-30:2005 |
Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
온도: Max. 55 ℃
습도: Max. 98 % R.H. |
소재지 |
| IEC 60068-2-30:2025 |
Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
온도: Max. 55 ℃
습도: Max. 98 % R.H. |
소재지 |
| KRSA-3002-R4 |
스마트 급전제어장치
5.4.1.2 온도 특성 시험 [표 8]
5.4.1.3 상용주파수 내전압 시험 [표 9]
5.4.1.4 절연저항 측정시험 [표 10]
5.4.1.8 진동 및 충격시험 [표 14] |
온도: -25 ℃ ~ 70 ℃
내전압: AC 2 kV
절연저항: DC 500 V
진동주파수: 10 Hz ~ 150 Hz
최대가속도: 150 ㎨ |
소재지 |
| KS C IEC 60255-1:2009 |
측정 계전기와 보호 장치 – 제1부: 공통 요구사항
6.12.3 기후 환경 시험 |
온도: -40 ℃ ~ 100 ℃
습도: Max. 98 % R.H. |
소재지 |
| KS C IEC 60255-21-1:1988 |
전기 계전기 – 제21-1부: 보호 계전기와 보호기기의 진동, 충격, 충돌, 지진 시험 – 진동 시험 용어 |
진동주파수: 10 Hz ~ 150 Hz
최대가속도: 20 ㎨ |
소재지 |
| KS C IEC 60255-21-2:1988 |
전기 계전기 – 제21-2부: 보호 계전기와 보호기기의 진동, 충격, 충돌, 지진 시험 – 지진 시험 |
최대가속도: 300 ㎨ |
소재지 |
| KS C IEC 60255-27:2013 |
전기 계전기 – 제27부: 제품 안전 요구사항
10.6.4.3 교류/직류 절연전압시험
10.6.4.4 절연저항
(제외사항)
10.6.4.3.2.3 샘플링에 의한 검수시험 |
절연전압: Max. AC 3 000 V,
절연저항: DC 500 V |
소재지 |
| EN 50155:2021 |
Railway applications – Rolling stock - Electronic equipment
(Exception)
13.4.3 DC Power supply test
13.4.9 Electromagnetic compatibility test
13.4.12 Rapid Temperature variation test
13.4.13 Salt mist test |
온도: -40 ℃ ~ 85 ℃
진동주파수: 2 Hz ~ 500 Hz
습도: Max. 98 % R.H.
절연저항: 500 V, 20 ㏁ 이상
절연내력: Max. AC 1 500 V, Max. DC 2 200 V
가속도 : Max. 1 000 ㎨ |
소재지 |
| IEC 62498-3:2010 |
Railway applications – Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications
4.13 Vibrations and shocks |
진동주파수: 5 Hz ~ 2 000 Hz
최대가속도: 1 000 ㎨ |
소재지 |
| KRS SG 0027-23(R) |
MJ81형 선로전환기
4.2 시험
(제외사항)
4.2.2 성능시험
4.2.4 내구성 시험
4.2.6 전기자기 적합성(EMC) 시험 |
절연내력: Max. AC 2 000 V
온도: -40 ℃ ~ 70 ℃
습도: Max. 98 % R.H.
진동주파수: 5 Hz ~ 2 000 Hz
가속도: Max. 1 000 ㎨
Max. IP68 |
소재지 |
| EN 60068-2-14:2009 |
Environmental testing – Part 2-14: Tests – Test N: Change of temperature
(Exception)
8.2.3 Severities
(3 ± 0.6) K/min,
(5 ± 1) K/min,
(10 ± 2) K/min,
(15 ± 3) K/min
9. Test Nc: Rapid change of temperature, two-fluid-bath method |
온도: -40 ℃ ~ 100 ℃ |
소재지 |
| IEC 60068-2-2:2007 |
Environmental testing – Part 2-2: Tests – Test B: Dry heat
(Exception)
6.5.2 Temperature
125 ℃, 155 ℃, 175 ℃, 200 ℃, 250 ℃, 315 ℃, 400 ℃, 500 ℃, 630 ℃, 800 ℃, 1 000 ℃ |
온도: 30 ℃ ~ 100 ℃ |
소재지 |
| EN IEC 60068-2-78:2025 |
Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, steady state |
온도: Max. 55 ℃
습도: Max. 95 % R.H. |
소재지 |
