| ▶ 가정용 전기기기 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.4.12 Insulating liquid
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex X Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112)
Annex Y.2 Resistance to UV radiation
Annex Y.3 Resistance to corrosion
Annex Y.3.3 Water-saturated sulphur dioxide atmosphere
Annex Y.4.3 Tensile strength and elongation tests
Annex Y.4.4 Compression tests
Annex Y.4.5 Oil resistance (Test)
Annex Y.5 Protection from moisture
Annex Y.5.3 Water spray test
Annex Y.5.5 Protection from excessive dust |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
EN IEC 62368-
1:2020+A11:2020 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.4.12 Insulating liquid
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex X Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112)
Annex Y.2 Resistance to UV radiation
Annex Y.3 Resistance to corrosion
Annex Y.3.3 Water-saturated sulphur dioxide atmosphere
Annex Y.4.3 Tensile strength and elongation tests
Annex Y.4.4 Compression tests
Annex Y.4.5 Oil resistance (Test)
Annex Y.5 Protection from moisture
Annex Y.5.3 Water spray test
Annex Y.5.5 Protection from excessive dust |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| KC 62368-1:2025-10-27 |
전기용품안전기준: 오디오/비디오 및 정보통신기술기기, 제1부: 안전 요구 사항
[제외항목]
5.4.1.5.3 열 사이클링 시험절차
5.4.1.10.2 연화온도(Vicat) 시험
5.4.3.3 재질 그룹 및 비교 트래킹 지수(CTI)
5.4.4.6.5 맨드릴(Mandrel) 시험
5.4.7 반도체 부품(소자)와 접합(부)에 대한 시험
5.4.12 절연유
5.5.2 캐패시터 및 RC 장치(부속서 G.11 시험)
5.6.4.1 과전류 보호장치와 회로의 시험(부속서 R)
7.3 오존 노출
8.5.5 고압 램프
8.8 핸드(손잡이) 강도
8.12 텔레스코핑 또는 로드 안테나(부속서 T.11)
10 방사(선)
부속서 B.2.5 3상 전압 시스템
부속서 C 자외선(UV radiation)
부속서 G.1 스위치(시험)
부속서 G.2 릴레이(시험)
부속서 G.3 보호 수단장치(시험)
부속서 G.5.1 권선 부품에 전선 절연
부속서 G.5.3.4 FIW(완전 절연 권선)을 사용한 변압기(시험)
부속서 G.6 전선 절연(시험)
부속서 G.7 KS C IEC 60227에 따른 시험
부속서 G.8 배리스터(시험)
부속서 G.9 집적회로(IC) 전류 제한기(시험)
부속서 G.10 저항
부속서 G.11 캐패시터 및 RC 장치(시험)
부속서 G.12 광 커플러(옵터 커플러)(시험)
부속서 G.13.6 코팅 인쇄기판 시험
부속서 G.14 부품 단자 위 코팅
부속서 G.15 가압 액체로 채워진 부품
부속서 H 전화벨(링) 신호에 대한 기준
부속서 J 중간 절연 없이 사용하기 위한 절연 권선 전선(시험)
부속서 K 안전 인터락(시험)
부속서 M.7 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R 제한 단락 회로 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 X 420 V 피크(300 V RMS)를 초과하지 않는 AC 주전원에 연결된 회로에서 절연의 공간거리 측정을 위한 대체 방안(KS C IEC 60112에 따른 트래킹 지수 시험/맨드릴(Mandrel) 시험)
부속서 Y.2 자외선에 대한 내성(시험)
부속서 Y.3 부식에 대한 내성(시험)
부속서 Y.3.3 수포화 이산화황 (시험)
부속서 Y.4.3 인장 강도 및 연신율 시험
부속서 Y.4.4 압축 시험
부속서 Y.4.5 내유성(시험)
부속서 Y.5 습기로부터의 보호
부속서 Y.5.3 물 분무 시험
부속서 Y.5.5 과도한 먼지로부터의 보호 |
전원전압:
Max. 300 V
온도:
Max. 200 °C
내전압:
Max. 10 kV
접촉전류:
Max. 10 mA |
소재지 |
| QCVN 132:2022/BTTTT |
National technical regulation on electrical safety requirements for telecommunication and information terminal equipment
[Exception]
2.2.4.1.5.3 Thermal cycling test procedure
2.2.4.1.10.2 Vicat test
2.2.4.3.3 Material group and CTI
2.2.4.4.6.5 Mandrel test
2.2.4.7 Tests for semiconductor components and for cemented joints
2.2.4.12 Insulating liquid
2.2.5.2 Capacitors and RC units
2.2.6.4.1 Determination of the overcurrent protective device and circuit (Annex P)
Annex A.2.5 Three-phase voltage systems
Annex D.1 Switches (Test)
Annex D.2 Relays (Test)
Annex D.3 Protective devices (Test)
Annex D.5.1 Wire insulation in wound components
Annex D.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex D.6 Wire insulation (Test)
Annex D.7 Test according to IEC 60227
Annex D.8 Varistors (Test)
Annex D.9 Integrated circuit (IC) current limiters (Test)
Annex D.10 Test for resistor serving as safeguard Test sequence
Annex D.11 Capacitors and RC units (Test)
Annex D.12 Optocouplers (Test)
Annex D.13.6 Tests on coated printed boards
Annex D.14 Coatings on component terminals
Annex D.15 Pressurized liquid filled components
Annex E Criteria for telephone ringing signals
Annex H Insulated winding wires for use without interleaved insulation (Test)
Annex I Safety interlocks (Test)
Annex K Disconnect devices (Three-phase equipment Test)
Annex P Limited short-circuit test
Annex S Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112) |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| UL 62368-1, Ed.3, Rev. October 22, 2021 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.4.12 Insulating liquid
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex X Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112)
Annex Y.2 Resistance to UV radiation
Annex Y.3 Resistance to corrosion
Annex Y.3.3 Water-saturated sulphur dioxide atmosphere
Annex Y.4.3 Tensile strength and elongation tests
Annex Y.4.4 Compression tests
Annex Y.4.5 Oil resistance (Test)
Annex Y.5 Protection from moisture
Annex Y.5.3 Water spray test
Annex Y.5.5 Protection from excessive dust |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| CSA C22.2 NO. 62368-1:19, Rev. October 22, 2021 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.4.12 Insulating liquid
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex X Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112)
Annex Y.2 Resistance to UV radiation
Annex Y.3 Resistance to corrosion
Annex Y.3.3 Water-saturated sulphur dioxide atmosphere
Annex Y.4.3 Tensile strength and elongation tests
Annex Y.4.4 Compression tests
Annex Y.4.5 Oil resistance (Test)
Annex Y.5 Protection from moisture
Annex Y.5.3 Water spray test
Annex Y.5.5 Protection from excessive dust |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| KS C IEC 62368-1:2018 |
한국산업표준: 오디오/비디오 및 정보통신기술기기, 제1부: 안전 요구 사항
[제외항목]
5.4.1.5.3 열 사이클링 시험절차
5.4.1.10.2 연화온도(Vicat) 시험
5.4.3.3 재질 그룹 및 비교 트래킹 지수(CTI)
5.4.4.6.5 맨드릴(Mandrel) 시험
5.4.7 반도체 부품(소자)와 접합(부)에 대한 시험
5.4.12 절연유
5.5.2 캐패시터 및 RC 장치(부속서 G.11 시험)
5.6.4.1 과전류 보호장치와 회로의 시험(부속서 R)
7.3 오존 노출
8.5.5 고압 램프
8.8 핸드(손잡이) 강도
8.12 텔레스코핑 또는 로드 안테나(Annex T.11)
10 방사(선)
부속서 B.2.5 3상 전압 시스템
부속서 C 자외선(UV radiation)
부속서 G.1 스위치(시험)
부속서 G.2 릴레이(시험)
부속서 G.3 보호수단 장치(시험)
부속서 G.5.1 권선 부품에 전선 절연
부속서 G.5.3.4 FIW(완전 절연 권선)을 사용한 변압기(시험)
부속서 G.6 전선 절연(시험)
부속서 G.7 KS C IEC 60227에 따른 시험
부속서 G.8 배리스터(시험)
부속서 G.9 집적회로(IC) 전류 제한기(시험)
부속서 G.10 저항
부속서 G.11 캐패시터 및 RC 장치(시험)
부속서 G.12 광 커플러(옵터 커플러)(시험)
부속서 G.13.6 코팅 인쇄기판 시험
부속서 G.14 부품 단자 위 코팅
부속서 G.15 가압 액체로 채워진 부품
부속서 H 전화벨(링) 신호에 대한 기준
부속서 J 중간절연 없이 사용하기 위한 절연권선 전선(시험)
부속서 K 안전 인터락(시험)
부속서 M.7 납축전지 및 니켈-카드뮴 배터리의 폭발 위험
부속서 M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R 제한 단락 회로 시험
부속서 U CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 X 420 V 피크(300 V RMS)를 초과하지 않는 AC 주전원에 연결된 회로에서 절연의 공간거리 측정을 위한 대체 방안(KS C IEC 60112에 따른 트래킹 지수 시험/맨드릴(Mandrel) 시험)
부속서 Y.2 자외선에 대한 내성(시험)
부속서 Y.3 부식에 대한 내성(시험)
부속서 Y.3.3 수포화 이산화황(시험)
부속서 Y.4.3 인장 강도 및 연신율 시험
부속서 Y.4.4 압축 시험
부속서 Y.4.5 내유성(시험)
부속서 Y.5 습기로부터의 보호
부속서 Y.5.3 물 분무 시험
부속서 Y.5.5 과도한 먼지로부터의 보호 |
전원전압:
Max. 300 V
온도:
Max. 200 °C
내전압:
Max. 10 kV
접촉전류:
Max. 10 mA |
소재지 |
| IEC 62368-1:2014 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| UL 62368-1, Ed.2, Rev. December 01, 2014 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| CSA C22.2 NO. 62368-1:14 (R2019), Rev, February, 2014 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| IEC 62368-1:2023 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.4.12 Insulating liquid
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex X Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112)
Annex Y.2 Resistance to UV radiation
Annex Y.3 Resistance to corrosion
Annex Y.3.3 Water-saturated sulphur dioxide atmosphere
Annex Y.4.3 Tensile strength and elongation tests
Annex Y.4.4 Compression tests
Annex Y.4.5 Oil resistance (Test)
Annex Y.5 Protection from moisture
Annex Y.5.3 Water spray test
Annex Y.5.5 Protection from excessive dust |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
EN IEC 62368-
1:2024+A11:2024 |
Audio/video, information and communication technology equipment – Part 1: Safety requirements
[Exception]
5.4.1.5.3 Thermal cycling test procedure
5.4.1.10.2 Vicat test
5.4.3.3 Material group and CTI
5.4.4.6.5 Mandrel test
5.4.7 Tests for semiconductor components and for cemented joints
5.4.12 Insulating liquid
5.5.2 Capacitors and RC units
5.6.4.1 Determination of the overcurrent protective device and circuit (Annex R)
7.3 Ozone exposure
8.5.5 High pressure lamps
8.8 Handle strength test method
8.12 Telescoping or rod antennas (Annex T.11)
10 Radiation (Test)
Annex B.2.5 Three-phase voltage systems
Annex C UV radiation
Annex G.1 Switches (Test)
Annex G.2 Relays (Test)
Annex G.3 Protective devices (Test)
Annex G.5.1 Wire insulation in wound components
Annex G.5.3.4 Transformer using fully insulated winding wire (FIW)
Annex G.6 Wire insulation (Test)
Annex G.7 Test according to IEC 60227
Annex G.8 Varistors (Test)
Annex G.9 Integrated circuit (IC) current limiters (Test)
Annex G.10 Test for resistor serving as safeguard Test sequence
Annex G.11 Capacitors and RC units (Test)
Annex G.12 Optocouplers (Test)
Annex G.13.6 Tests on coated printed boards
Annex G.14 Coatings on component terminals
Annex G.15 Pressurized liquid filled components
Annex H Criteria for telephone ringing signals
Annex J Insulated winding wires for use without interleaved insulation (Test)
Annex K Safety interlocks (Test)
Annex L Disconnect devices (Three-phase equipment Test)
Annex M.7 Risk of explosion from lead acid and NiCd batteries
Annex M.8 Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R Limited short-circuit test
Annex S Tests for resistance to heat and fire
Annex U Mechanical strength of CRTs and protection against the effects of implosion
Annex X Alternative measurement method for spatial distance measurement of insulation in circuits connected to AC mains (300 V RMS) (Trace Index Test/Mandrel Test in accordance with KS C IEC 60112)
Annex Y.2 Resistance to UV radiation
Annex Y.3 Resistance to corrosion
Annex Y.3.3 Water-saturated sulphur dioxide atmosphere
Annex Y.4.3 Tensile strength and elongation tests
Annex Y.4.4 Compression tests
Annex Y.4.5 Oil resistance (Test)
Annex Y.5 Protection from moisture
Annex Y.5.3 Water spray test
Annex Y.5.5 Protection from excessive dust |
Input Voltage:
Max. 300 V
Heating:
Max. 200 °C
Withstanding voltage:
Max. 10 kV
Touch current:
Max. 10 mA |
소재지 |
| UL 62368-1, Edition 4 (July 31, 2025), |
Audio/video, information and communication technology equipment - Part 1: Safety requirements |
Input Voltage: Max. 300 V
Heating : Max. 200 °C
Withstanding voltage:
Max. 10 kV |
소재지 |
| CSA C22.2 NO. 62368-1:25, Edition 4 (July, 2025) |
Audio/video, information and communication technology equipment - Part 1: Safety requirements |
Input Voltage: Max. 300 V
Heating : Max. 200 °C
Withstanding voltage:
Max. 10 kV |
소재지 |
| ▶ 유/무선 통신기기 |
ETSI EN 302 291-1
V1.1.1:2005 |
Electromagnetic
compatibility and Radio
spectrum Matters
(ERM); Short Range
Devices (SRD); Close
Range Inductive Data
Communication
equipment operating at
13,56 MHz;
Part 1: Technical
characteristics and test
methods |
9 kHz to 1 GHz |
소재지 |
AS/NZS
4268:2017 |
Radio equipment and
systems - short range
devices - Limits and
methods of
measurement |
9 kHz ~ 26.5 GHz |
소재지 |
| EN 50663:2017 |
Generic standard for
assessment of low
power electronic and
electrical equipment
related to human
exposure restrictions for
electromagnetic fields
(10 MHz - 300 GHz) |
10 MHz ~ 40 GHz |
소재지 |
| IEC/IEEE 62209-1528:2020 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices - Human models, instrumentation and procedures (Frequency range of 4 MHz to 10 GHz) |
4 MHz to 10 GHz |
소재지 |
| EN IEC/IEEE 62209-1528:2021 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices - Human models, instrumentation and procedures (Frequency range of 4 MHz to 10 GHz) |
4 MHz to 10 GHz |
소재지 |
| EN 50566:2018 |
Product standard to
demonstrate the
compliance of wireless
communication devices
with the basic
restrictions and
exposure limit values
related to human
exposure to
electromagnetic fields in
the frequency range
from 30 MHz to 6 GHz :
hand-held and body
mounted devices in
close proximity to the
human body |
30 MHz ~ 6 GHz |
소재지 |
| EN 50360:2017 |
Product standard to
demonstrate the
compliance of wireless
communication devices,
with the basic
restrictions and
exposure limit values
related to human
exposure to
electromagnetic fields in
the frequency range
from 300 MHz to 6
GHz: devices used next
to the ear |
300 MHz ~ 6 GHz |
소재지 |
| EN 62479:2010 |
Assessment of the
compliance of lowpower
electronic and
electrical equipment
with the basic
restrictions related to
human exposure to
electromagnetic fields
(10 MHz to 300 GHz) |
10 MHz ~ 40 GHz |
소재지 |
| EN 62311:2020 |
Assessment of electronic
and electrical equipment
related to human
exposure restrictions for
electromagnetic fields (0
Hz to 300 GHz) |
9 kHz ~ 40 GHz |
소재지 |
ETSI EN 303 417
V1.1.1:2017 |
Wireless power
transmission systems,
using technologies other
than radio frequency
beam in the 19 - 21
kHz, 59 - 61 kHz, 79 -
90 kHz, 100 - 300 kHz,
6 765 - 6 795 kHz
ranges;
Harmonised Standard
covering the essential
requirements of article
3.2 of Directive
2014/53/EU |
9 kHz to 1 GHz |
소재지 |
| ETSI EN 302 291-2V1.1.1:2005 |
Electromagnetic
compatibility and Radio
spectrum Matters
(ERM); Short Range
Devices (SRD); Close
Range Inductive Data
Communication
equipment operating at
13,56 MHz;
Part 2: Harmonized EN
under article 3.2 of the
R&TTE Directive |
9 kHz to 1 GHz |
소재지 |
ETSI EN 303 413
V1.2.1:2021 |
Satellite Earth Stations
and Systems (SES);
Global Navigation
Satellite System (GNSS)
receivers; Radio
equipment operating in
the 1 164 MHz to 1 300
MHz and 1 559 MHz to
1 610 MHz frequency
bands; Harmonised
Standard for access to
radio spectrum |
30 MHz to 8.3 GHz |
소재지 |
ETSI EN 300 440
V2.2.1:2018 |
Short Range Devices
(SRD); Radio equipment
to be used in the 1 GHz
to 40 GHz frequency
range; Harmonised
Standard for access to
radio spectrum |
25 MHz to 40 GHz |
소재지 |
ETSI EN 300 330
V2.1.1:2017 |
Short Range Devices
(SRD); Radio equipment
in the frequency range 9
kHz to 25 MHz and
inductive loop systems
in the frequency range 9
kHz to 30 MHz;
Harmonised Standard
covering the essential
requirements of article
3.2 of Directive
2014/53/EU |
9 kHz to 1 GHz |
소재지 |
ETSI EN 300 220-2
V3.3.1:2025 |
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 2: Harmonised Standard for access to radio spectrum
for non specific radio equipment |
25 MHz to 6 GHz |
소재지 |
ETSI EN 300 220-1
V3.1.1:2017 |
Short Range Devices
(SRD) operating in the
frequency range 25
MHz to 1 000 MHz; Part
1: Technical
characteristics and
methods of
measurement |
25 MHz to 6 GHz |
소재지 |
ETSI EN 301 893
V2.2.1:2024 |
5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum |
30 MHz to 26 GHz |
소재지 |
ETSI EN 300 328
V2.2.2:2019 |
Wideband transmission
systems; Data
transmission equipment
operating in the 2,4
GHz band; Harmonised
Standard for access to
radio spectrum |
30 MHz to 12.75 GHz |
소재지 |
ETSI EN 303 687
V1.1.1(2023.06) |
6 GHz WAS/RLAN;
Harmonised Standard
for access to radio
spectrum |
30 MHz to 26 GHz |
소재지 |
| QCVN 54:2020/BTTTT |
National technical regulation on wideband data transmission equipment operating in the 2,4 GHz band |
30 MHz to 12.75 GHz |
소재지 |
| QCVN 55:2023/BTTTT |
NATIONAL TECHNICAL REGULATION ON SHORT RANGE DEVICE (SRD) - RADIO EQUIPMENT TO BE USED IN THE 9
kHz TO 25 MHz FREQUENCY RANGE AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 kHz TO 30 MHz |
9 kHz to 1 GHz |
소재지 |
| QCVN 65:2021/BTTTT |
NATIONAL TECHNICAL REGULATION ON RADIO ACCESS
EQUIPMENT OPERATING IN THE 5 GHZ BAND |
30 MHz to 26 GHz |
소재지 |
| QCVN 117:2023/BTTTT |
National technical regulation on GSM,
W-CDMA, E-UTRA Land Mobile User Equipment - Radio Access |
GSM, W-CDMA, E-UTRA |
소재지 |
| QCVN 127:2021/BTTTT |
National technical regulation
on Standalone 5G User Equipment - Radio Access |
SA 5G |
소재지 |
| QCVN 129:2021/BTTTT |
National technical regulation on Non
Standalone 5G User Equipment - Radio Access |
NSA 5G |
소재지 |
| ▶ 전자기적합성 |
| ANSI C63.4-2014 |
American National
Standard for Methods of
Measurement of Radio-
Noise Emissions from
Low-Voltage Electrical
and Electronic
Equipment in Range of
9 ㎑ ∼ 40 ㎓ |
RE : 9kHz - 40 GHz
CE : 9kHz - 30 MHz |
소재지 |
| AS/NZS CISPR 11:2024 |
Industrial, scientific and
medical equipment -
Radio-frequency
disturbance
characteristics - Limits
and methods of
measurement
[Exception]
Radiation disturbance
test of 30 m measuring
distance of Group 2 Class
A equipment |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| AS/NZS CISPR 14.1:2021 |
Electromagnetic
compatibility -
Requirements for
household appliances,
electric tools and similar
apparatus, Part 1:
Emission |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| AS/NZS CISPR 15:2025 |
Limits and methods of
measurement of radio
disturbance
characteristics of
electrical lighting and
similar equipment
[Exception]
4.5.2 3m, 4m loop
antenna radiation |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 300 MHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| AS IEC 61000.4.5:2017 |
Electromagnetic
compatibility (EMC) -
Part 4.5:Testing and
measurement
techniques - Surge
immunity test |
1 phase equipment, ≤ 16 A
Surge : Max. ±4 kV |
소재지 |
| AS/NZS IEC 61000.4.6:2024 |
Electromagnetic
compatibility (EMC) -
Part 4.6:Testing and
measurement
techniques - Immunity
to conducted
disturbances, induced by
radio-frequency fields |
1 phase equipment, ≤ 16 A
CS : 150 kHz ~ 230 MHz, 10 V |
소재지 |
| AS 61000.6.4:2020 |
Electromagnetic
compatibility (EMC),
Part 6.4:Generic
standards - Emission
standard for industrial
environments |
RE : 30 MHz ~ 6 GHz
CE : 0.15 MHz ~ 30 MHz |
소재지 |
| AS/NZS CISPR 14.2:2021 |
Electromagnetic
compatibility -
Requirements for
household appliances,
electric tools and similar
apparatus - Part 2:
Immunity - Product
family standard |
1 phase equipment, ≤ 16 A
ESD : Air ±30 kV Contact ±25 kV
RS : 80 MHz ~ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 230 MHz, 3 V
M/F : 10 A/m
V-DIP : 0 ~ 100 % |
소재지 |
| AS/NZS CISPR 32:2015 |
Electromagnetic
compatibility of
multimedia equipment -
Emission requirements |
1 phase equipment, ≤ 16 A
RE : 30 MHz ~ 6 GHz
CE : 0.15 MHz ~ 30 MHz |
소재지 |
AS/NZS CISPR 32:2015
AMD 1:2020 |
Electromagnetic
compatibility of
multimedia equipment -
Emission requirements |
1 phase equipment, ≤ 16 A
RE : 30 MHz ~ 6 GHz
CE : 0.15 MHz ~ 30 MHz |
소재지 |
| AS/NZS IEC 61000.4.2:2013 |
Electromagnetic
compatibility (EMC)
Part 4.2:Testing and
measurement
techniques -
Electrostatic discharge
immunity test |
1 phase equipment, ≤ 16 A
ESD : Max. ±30 kV |
소재지 |
| AS/NZS IEC 61000.4.3:2021 |
Electromagnetic
compatibility (EMC)
Part 4.3:Testing and
measurement
techniques - Radiated,
radio - Frequency,
electromagnetic field
immunity test |
1 phase equipment, ≤ 16 A
RS : 80 MHz ∼ 6 GHz, 10 V/m |
소재지 |
| AS/NZS IEC 61000.4.4:2013 |
Electromagnetic
compatibility (EMC)
Part 4.4:Testing and
measurement
techniques - Electrical
fast transient/burst
immunity test |
1 phase equipment, ≤ 16 A
EFT : Max. ±4 kV |
소재지 |
| AS/NZS IEC 61000.3.2:2023 |
Electromagnetic
compatibility (EMC)
Part 3.2:Limits - Limits for
harmonic current
emissions (equipment
input current ≤16 A per phase) |
1 phase equipment, ≤ 16 A |
소재지 |
| AS/NZS IEC 61000.3.3:2023 |
Electromagnetic
compatibility (EMC)
Part 3.3:Limits -
Limitation of voltage
changes, voltage
fluctuations and flicker
in public low-voltage
supply systems, for
equipment with rated
current ≤16 A per phase and
not subject to
conditional connection |
1 phase equipment, ≤ 16 A |
소재지 |
| AS/NZS 61000.4.11:2005 |
Electromagnetic
compatibility (EMC)
Part 4.11:Testing and
measurement
techniques - Voltage
dips, short interruptions
and voltage variations
immunity tests |
1 phase equipment, ≤ 16 A
V-DIP: Max. 100 % |
소재지 |
| AS/NZS 61000.4.8:2012 |
Electromagnetic
compatibility (EMC)
Part 4.8:Testing and
measurement
techniques - Power
frequency magnetic field
immunity test |
1 phase equipment, ≤ 16 A
M/F : Max. 30 A/m |
소재지 |
| AS/NZS 61000.6.1:2025 |
Electromagnetic
compatibility (EMC)
Part 6.1:Generic standards -
Immunity for residential,
commercial and light-industrial
environments |
1 phase equipment, ≤ 16 A
ESD : AIR ±8 kV
CONTACT ±4 kV
RS : 80 MHz ~ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 0 ~ 100 % |
소재지 |
| AS/NZS 61000.6.2:2022 |
Electromagnetic
compatibility (EMC)
Part 6.2:General standards -
Immunity for industrial
environments |
1 phase equipment, ≤ 16 A
ESD : AIR ±8 kV CONTACT ±4 kV
RS : 80 MHz ~ 6 GHz,10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ~ 80 MHz, 10 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
| AS/NZS 61000.6.3:2021 |
Electromagnetic
compatibility (EMC)
Part 6.3:Generic standards -
Emission standard for
equipment in residential
environments |
1 phase equipment, ≤ 16 A
RE : 30 MHz ~ 6 GHz
CE : 0.15 MHz ~ 30 MHz |
소재지 |
| CISPR 11:2024 |
Industrial, scientific and
medical equipment –
Radio-frequency
disturbance
characteristics – Limits
and methods of
measurement
[Exception]
8 Special provisions for
test site measurements |
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| CISPR 14-1:2020 |
Electromagnetic
compatibility –
Requirements for
household appliances,
electric tools and similar
apparatus – Part 1:Emission |
RE : 9 kHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| CISPR 14-2:2020 |
Electromagnetic
compatibility —
Requirements for
household appliances,
electric tools and similar
apparatus — Part 2:Immunity Product family
standard |
ESD : ±8 kV
RS : 80 MHz ∼ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 230 MHz, 3 V
V-DIP : 0 ∼ 100 % |
소재지 |
| CISPR 32:2015 |
Electromagnetic
compatibility of
multimedia equipment -
Emission Requirements |
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
DV : 30 MHz ∼ 2.15 GHz |
소재지 |
| CISPR 32:2015+A1:2019 |
Electromagnetic
compatibility of
multimedia equipment -
Emission Requirements |
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
DV : 30 MHz ∼ 2.15 GHz |
소재지 |
| CISPR 35:2016 |
Electromagnetic
compatibility of
multimedia equipment-
Immunity requirements
Table 2 - Immunity
requirements
[Exception]
analogue/digital data
ports:
2.2 Broadband impulse
noise disturbances
repetitive
2.3 Broadband impulse
noise disturbances,
isolated |
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz
M/F : 1 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
| CISPR 15:2018+A1:2024 |
Limits and methods of
measurement of radio
disturbance
characteristics of
electrical lighting and
similar equipment |
RE : 9 kHz ~ 1 GHz
CE : 9 kHz ~ 30 MHz |
소재지 |
| EN 50130-4:2011/A1:2014 |
Alarm systems - Part 4:
Electromagnetic
compatibility - Product
family standard:
Immunity requirements
for components of fire,
intruder,hold up, CCTV, access control and social alarm systems |
ESD : ±8 kV
RS : 80 MHz ∼ 2 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 100 MHz, 10 V
V-DIP : 0 ∼ 100 % |
소재지 |
| EN 55032:2015 |
Electromagnetic
compatibility of
multimedia equipment -
Emission Requirements |
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
DV : 30 MHz ∼ 2.15 GHz |
소재지 |
| EN 60945:2002 |
Maritime navigation and
radio communication
equipment and systems
— General requirements
— Methods of testing
and required test results |
RE : 150 kHz ~ 2 GHz
CE : 10 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2.0 kV
Surge : ±1.0 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : 0 ~ 100 % |
소재지 |
| EN 61000-3-3:2013/A2:2021/AC:2022-01 |
Electromagnetic
compatibility (EMC) -
Part 3-3:Limits -
Limitation of voltage
changes, voltage
fluctuations and flicker
in public low-voltage
supply systems, for
equipment with rated
current <= 16 A per
phase and not subject to
conditional connection |
1 phase equipment, ≤ 16 A |
소재지 |
| EN 61000-4-2:2009 |
Electromagnetic
compatibility (EMC) —
Part 4-2:Testing and
measurement
techniques -
Electrostatic discharge
immunity test |
ESD : ±30 kV |
소재지 |
| EN 61000-4-4:2012 |
Electromagnetic
compatibility(EMC) —
Part 4-4: Testing and
measurement
techniques - Electrical
fast transient/burst
immunity test |
EFT : ±4 ㎸ |
소재지 |
| EN 61000-4-5:2014/A1:2017 |
Electromagnetic
compatibility (EMC) -
Part 4-5:Testing and
measurement
techniques - Surge
immunity test |
1 phase equipment, ≤ 16 A
Surge : ±6 kV |
소재지 |
| EN IEC 61000-4-6:2023 |
Electromagnetic
compatibility (EMC) —
Part 4-6:Testing and
measurement
techniques - Immunity
to conducted
disturbances, induced by
radio-frequency fields |
CS : 150 kHz ∼ 230 MHz |
소재지 |
| EN 61000-4-8:2010 |
Electromagnetic
compatibility (EMC) Part
4-8:Testing and
measurement
techniques - Power
frequency magnetic field
immunity test |
M/F : 30 A/m |
소재지 |
| EN IEC 61204-3:2018 |
Low voltage power
supplies, d.c. output -
Part 3:Electromagnetic
compatibility (EMC) |
RE : 30 MHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz
ESD : ±8 kV
RS : 80 MHz ∼ 1 GHz, 3 V/m
EFT : ±1 kV
SURGE : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ∼ 100 % |
소재지 |
| EN IEC 61326-1:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements
Part1:General
requirements |
ESD : ±8 kV,
RS : 80 MHz ∼ 2.7 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
| EN IEC 61547:2023 |
Equipment for general
lighting purposes - EMC
immunity requirements |
ESD : ±8 kV
RS : 80 MHz ∼ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 1 A/m,
V-DIP : 0 ∼ 100 % |
소재지 |
EN IEC 55014-
1:2021 |
Electromagnetic
compatibility -
Requirements for
household appliances,
electric tools and similar
apparatus - Part 1:
Emission |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
EN IEC 55014-
2:2021 |
Electromagnetic
compatibility -
Requirements for
household appliances,
electric tools and similar
apparatus Part 2:
Immunity |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 230 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61000-3-
2:2019/A1:2021 |
Electromagnetic
compatibility (EMC) -
Part 3-2: Limits for
harmonic current
emissions (equipment
input current ≤ 16 A per
phase) |
1 phase equipment, ≤ 16 A |
소재지 |
EN IEC 61000-4-
11:2020 |
Electromagnetic
compatibility (EMC) -
Part 4-11: Testing and
measurement
techniques - Voltage
dips, short interruptions
and voltage variations
immunity tests for
equipment with input
current up to 16 A per
phase |
1 phase equipment, ≤ 16 A
V-DIP : 0 ∼ 100 % |
소재지 |
EN IEC 61000-4-
3:2020 |
Electromagnetic
compatibility (EMC) -
Part 4-3: Testing and
measurement
techniques - Radiated,
radio-frequency,
electromagnetic field
immunity test |
RS : 80 MHz ∼ 6 GHz |
소재지 |
EN IEC 61000-6-
1:2019 |
Electromagnetic
compatibility (EMC) -
Part 6-1: Generic
standards - Immunity
standard for residential,
commercial and lightindustrial
environments |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61000-6-
2:2019 |
Electromagnetic
compatibility (EMC) -
Part 6-2: Generic
standards - Immunity
standard for industrial
environments |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 kHz ∼ 80 MHz, 10 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61000-6-
3:2021 |
Electromagnetic
compatibility (EMC) -
Part 6-3: Generic
standards - Emission
standard for equipment
in residential
environments |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
EN IEC 61000-6-
4:2019 |
Electromagnetic
compatibility (EMC) -
Part 6-4: Generic
standards - Emission
standard for industrial
environments |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
EN IEC 61326-
1:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
1:General requirements |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 ㎑ ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61326-2-
1:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-1:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for sensitive test and
measurement
equipment for EMC
unprotected
applications |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61326-2-
2:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-2:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for portable testing,
measuring and
monitoring equipment
used in low-voltage
distribution systems |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61326-2-
3:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-3:Particular
requirements - Test
configuration,
operational conditions
and performance criteria
for transducers with
integrated or remote
signal conditioning |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61326-2-
4:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-4:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for insulation
monitoring devices
according to IEC 61557-
8 and for equipment for
insulation fault location
according to IEC 61557-
9 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
EN IEC 61326-2-
5:2021 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-5:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for field devices with
field bus interfaces
according to IEC 61784-
1 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
| EN IEC 55015:2019/A11:2020 |
Limits and methods of
measurement of radio
disturbance
characteristics of
electrical lighting and
similar equipment |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 1 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| EN IEC 55011:2025 |
Industrial, scientific and
medical equipment -
Radio-frequency
disturbance
characteristics - Limits
and methods of
measurement |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 18 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| EN 55032:2015/A1:2020 |
Electromagnetic
compatibility of
multimedia equipment-
Emission Requirements |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
DV : 30 MHz ∼ 2.15 GHz |
소재지 |
| EN 55032:2015/A11:2020 |
Electromagnetic
compatibility of
multimedia equipment -
Emission Requirements |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
DV : 30 MHz ∼ 2.15 GHz |
소재지 |
| EN 55035:2017/A11:2020 |
Electromagnetic
compatibility of
multimedia equipment-
Immunity Requirements
Table 2 Immunity
requirements for
analogue/digital data
ports:2.2 Broadband impulse
noise disturbances
repetitive
2.3 Broadband impulse
noise disturbances,
isolated |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 1 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
ETSI EN 301 489-
15
V2.2.1:2019 |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 15:Specific
conditions for
commercially available
amateur radio
equipment; Harmonised
Standard covering the
essential requirements
of article 3.1(b) of
Directive 2014/53/EU |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ETSI EN 301 489-17 V3.3.1:2024 |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 17:Specific conditions for
Broadband and Wideband Data Transmission Systems;
Harmonised Standard for ElectroMagnetic Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ETSI EN 301 489-19 V2.2.1:2022 |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 19:Specific
conditions for Receive
Only Mobile Earth
Stations (ROMES)
operating in the 1,5
GHz band providing
data communications
and GNSS receivers
operating in the RNSS
band providing
positioning, navigation,
and timing data;
Harmonised Standard
for ElectroMagnetic
Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ETSI EN 301 489-50 V2.4.1:2025 |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 50:Specific
conditions for Cellular
Communication Base
Station (BS), repeater
and ancillary equipment;
Harmonised Standard
for ElectroMagnetic
Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ETSI EN 301 489-52 V1.3.1:2024 |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 52:Specific
conditions for Cellular
Communication User
Equipment (UE) radio
and ancillary equipment;
Harmonised Standard
for ElectroMagnetic
Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
ETSI EN 301 489-1
V2.2.3:2019 |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 1:Common
technical requirements;
Harmonised Standard
for ElectroMagnetic
Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ETSI EN 301 489-3 V2.3.2:2023 |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 3:Specific conditions for
Short Range Devices (SRD)
operating on frequencies between 9 kHz and 246 GHz;
Harmonised Standard for ElectroMagnetic Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ETSI EN 301 489-5 V2.3.1:2025 |
ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services;
Part 5:Specific conditions for
Private land Mobile Radio (PMR) and
ancillary equipment (speech and non-speech) and
Terrestrial Trunked Radio (TETRA);
Harmonised Standard for ElectroMagnetic Compatibility |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
ETSI EN 301 489-9
V2.1.1:2019 |
ElectroMagnetic
Compatibility (EMC)
standard for radio
equipment and services;
Part 9:Specific
conditions for wireless
microphones, similar
Radio Frequency (RF)
audio link equipment,
cordless audio and inear
monitoring devices;
Harmonised Standard
covering the essential
requirements of article
3.1(b) of Directive
2014/53/EU |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| FCC Part 15 |
Radio Frequency Devices
Sub Part B
Unintentional Radiators
only |
RE : 30 MHz ~ 40 GHz
CE : 150 kHz ~ 30 MHz |
소재지 |
| FCC Part 18 |
Industrial, Scientific and
Medical Equipment |
RE : 30 MHz ~ 6 GHz
CE : 150 kHz ~ 30 MHz |
소재지 |
| ICES-003:2016 |
Information Technology
Equipment (Including
Digital Apparatus) —
Limits and Methods of
Measurement |
RE : 30 MHz ~ 40 GHz
CE : 150 kHz ~ 30 MHz |
소재지 |
| IEC 60945:2002 |
Maritime navigation and
radio communication
equipment and systems
- General requirements -
Methods of testing and
required test results |
RE : 150 kHz ~ 2 GHz
CE : 10 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2.0 kV
Surge : ±1.0 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : 0 ~ 100 % |
소재지 |
IEC 61000-3-
2:2018+AMD1:20
20 CSV |
Electromagnetic
compatibility (EMC) -
Part 3-2:Limits for
harmonic current
emissions (equipment
input current ≤16 A per
phase) |
1 phase equipment, ≤ 16 A |
소재지 |
IEC 61000-3-
3:2013+AMD1:20
17+AMD2:2021
CSV |
Electromagnetic
compatibility (EMC) -
Part 3-3:Limits -
Limitation of voltage
changes, voltage
fluctuations and flicker
in public low-voltage
supply systems, for
equipment with rated
current ≤ 16 A per
phase and not subject to
conditional connection |
1 phase equipment, ≤ 16 A |
소재지 |
IEC 61000-4-
11:2020 |
Electromagnetic
compatibility (EMC) -
Part 4-11:Testing and
measurement
techniques - Voltage
dips, short interruptions
and voltage variations
immunity tests for
equipment with input
current up to 16 A per
phase |
1 phase equipment, ≤ 16 A
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61000-4-
2:2008 |
Electromagnetic
compatibility (EMC) -
Part 4-2:Testing and
measurement
techniques -
Electrostatic discharge
immunity test |
ESD : ±30 kV |
소재지 |
IEC 61000-4-
3:2020 |
Electromagnetic
compatibility (EMC) -
Part 4-3:Testing and
measurement
techniques - Radiated,
radio-frequency,
electromagnetic field
immunity test |
RS : 80 MHz ∼ 6 GHz |
소재지 |
IEC 61000-4-
4:2012 |
Electromagnetic
compatibility (EMC) —
Part 4-4:Testing and
measurement
techniques - Electrical
fast transient/burst
immunity test |
EFT : ±4 ㎸ |
소재지 |
IEC 61000-4-
5:2014+AMD1:20
17 CSV |
Electromagnetic
compatibility (EMC) -
Part 4-5:Testing and
measurement
techniques - Surge
immunity test |
1 phase equipment, ≤ 16 A
Surge : ±4 kV |
소재지 |
| IEC 61000-4-6:2023 |
Electromagnetic
compatibility (EMC) —
Part 4-6:Testing and
measurement
techniques - Immunity
to conducted
disturbances, induced by
radio-frequency fields |
CS : 150 kHz ∼ 230 MHz |
소재지 |
IEC 61000-4-
8:2009 |
Electromagnetic
compatibility (EMC) —
Part 4-8:Testing and
measurement
techniques-Power
frequency magnetic field
immunity test |
M/F : 30 A/m |
소재지 |
IEC 61000-6-
1:2016 |
Electromagnetic
compatibility (EMC) -
Part 6-1:
Generic standards -
Immunity for residential,
commercial and lightindustrial
environments |
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 3 V
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61000-6-
2:2016 |
Electromagnetic
compatibility (EMC) -
Part 6-2:
Generic standards -
Immunity for industrial
environments |
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 10 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61000-6-
3:2020 |
Electromagnetic
compatibility (EMC) -
Part 6-3:Generic
standards - Emission
standard for equipment
in residential
environments |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
IEC 61000-6-
4:2018 |
Electromagnetic
compatibility (EMC) -
Part 6-4:Generic
standards - Emission
standard for industrial
environments |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
1:General requirements |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61326-2-
1:2020 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-1:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for sensitive test and
measurement
equipment for EMC
unprotected
applications |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61326-2-
2:2020 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-2:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for portable testing,
measuring and
monitoring equipment
used in low-voltage
distribution systems |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61326-2-
3:2020 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-3:Particular
requirements - Test
configuration,
operational conditions
and performance criteria
for transducers with
integrated or remote
signal conditioning |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61326-2-
4:2020 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-4:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for insulation
monitoring devices
according to IEC 61557-
8 and for equipment for
insulation fault location
according to IEC 61557-
9 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
IEC 61326-2-
5:2020 |
Electrical equipment for
measurement, control
and laboratory use -
EMC requirements - Part
2-5:Particular
requirements - Test
configurations,
operational conditions
and performance criteria
for field devices with
field bus interfaces
according to IEC 61784-
1 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 30 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
| IEC 61547:2020 |
Equipment for general
lighting purposes - EMC
immunity requirements |
ESD : ±8 kV
RS : 80 MHz ∼ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
| KN 60945_60533:2015 |
해상항해용 무선설비_항해
기기 및 선박용 전기전자기
기 전자파적합성 시험방법 |
RE : 150 kHz ~ 2 GHz
CE : 10 kHz ~ 30 MHz
ESD : ±8 kV
RS : 80 MHz ~ 2 GHz, 10 V/m
EFT : ±2.0 kV
Surge : ±1.0 kV
CS : 150 kHz ~ 80 MHz, 10 V
V-DIP : 0 ~ 100 % |
소재지 |
| KS C 9547:2023 |
일반 조명기기 - 전자파적
합성(EMC) 내성 요구사항 |
ESD : ±15 kV
RS : 80 MHz ∼ 1 GHz, 3 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 0 ∼ 100 % |
소재지 |
KS C 9610-3-
2:2023 |
전자파적합성(EMC) - 제3-
2부:허용기준 - 고조파 전
류의 허용기준(상당 입력
전류 16A 이하 기기) |
1 phase equipment, ≤ 16 A |
소재지 |
KS C 9610-3-
3:2023 |
전자파적합성(EMC) - 제3-
3부:허용기준 - 공공 저압
배전망에 사용하는 기기의
플리커와 전압변동에 대한
허용기준(상당 16A 이하
기기) |
1 phase equipment, ≤ 16 A |
소재지 |
KS C 9610-4-
11:2020 |
전자파적합성(EMC) - 제4-
11부:시험 및 측정 기술 -
전압 강하, 순간 정전, 전압
변동 내성 시험 |
1 phase equipment, ≤ 16 A
V-DIP : Max. 100 % |
소재지 |
KS C 9610-4-
2:2017 |
전자파적합성(EMC) - 제4-
2부:시험 및 측정 기술 - 정
전기 방전 내성 시험 |
ESD : Max. ±30 kV |
소재지 |
KS C 9610-4-
3:2017 |
전자파적합성(EMC) - 제4-
3부:시험 및 측정 기술 - 방
사성 RF 전자기장 내성 시
험 |
RS : 80 MHz ∼ 6 GHz |
소재지 |
KS C 9610-4-
4:2020 |
전자파적합성(EMC) - 제4-
4부:시험 및 측정 기술 - 전
기적 빠른 과도현상, 버스
트 내성 시험 |
1 phase equipment, ≤ 16 A
EFT : Max. ±4 kV |
소재지 |
KS C 9610-4-
5:2023 |
전자파적합성(EMC) - 제4-
5부:시험 및 측정 기술 - 서
지 내성 시험 |
1 phase equipment, ≤ 16 A
Surge : Max. ±4 kV |
소재지 |
KS C 9610-4-
6:2020 |
전자파적합성(EMC) - 제4-
6부:시험 및 측정 기술 - 전
도성 RF 전자기장 내성 시
험 |
1 phase equipment, ≤ 16 A
150 kHz ~ 230 MHz |
소재지 |
KS C 9610-4-
8:2017 |
전자파적합성(EMC) - 제4-
8부:시험 및 측정 기술 - 전
원 주파수 자기장 내성 시
험 |
M/F : Max. 30 A/m |
소재지 |
KS C 9610-6-
1:2019 |
전자파적합성(EMC) - 제6-
1부:일반표준 - 주거, 상업
및 경공업 환경에서 사용하
는 기기의 전자파 내성 표
준 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±2 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 3 A/m
V-DIP : 0 ~ 100 % |
소재지 |
KS C 9610-6-
2:2019 |
전자파적합성(EMC) - 제6-
2부:일반표준 - 산업 환경
에서 사용하는 기기의 전자
파 내성 표준 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±2 kV
SURGE : ±2 kV
CS : 150 ㎑ ∼ 80 MHz, 10 V
M/F : 30 A/m
V-DIP : 0 ~ 100 % |
소재지 |
KS C 9610-6-
3:2023 |
전자파적합성(EMC) - 제6-
3부:일반기준 - 주거용, 상
업용 및 경공업 환경에서
사용하는 기기의 전자파 방
해 표준 |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
KS C 9610-6-
4:2022 |
전자파적합성(EMC) - 제6-
4부:일반표준 - 산업 환경
에서의 전자파 방출 표준 |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| KS C 9811:2019 |
산업,과학,의료용(ISM) 기
기 - 무선 주파수 방해 특성
- 허용기준 및 측정방법
[제외항목]
2종 A급기기의 측정거리
30 m 방사성 방해 시험 |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 18 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정
용 전기기기, 전동 공구 및
유사기기의 요구사항 - 제
1부:방출 |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 1 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정
용 전기기기, 전동 공구 및
유사기기의 요구사항 - 제
2부:내성 |
1 phase equipment, ≤ 16 A
ESD : ±30 kV
RS : 80 MHz ∼ 6 GHz, 10 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 230 MHz, 3 V
M/F : 10 A/m
V-DIP : 0 ~ 100 % |
소재지 |
| KS C 9815:2023 |
조명기기 및 유사 기기의
무선 방해 특성 측정 허용
기준과 측정방법
[제외항목]
4.5.2 3 m, 4 m 루프안테
나 방사 |
1 phase equipment, ≤ 16 A
RE : 9 kHz ∼ 1 GHz
CE : 9 kHz ∼ 30 MHz |
소재지 |
| KS C 9832:2024 |
멀티미디어 기기 전자파 방
해 시험방법 |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내
성 시험방법 |
1 phase equipment, ≤ 16 A
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±4 kV
CS : 150 kHz ∼ 80 MHz, 3 V
M/F : 1 A/m
V-DIP : 0 ~ 100 % |
소재지 |
| QCVN 118:2018/BTTTT |
National technical regulation
on Electromagnetic compatibility of multimedia equipment -
Emission requirements |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz |
소재지 |
| QCVN 18:2022/BTTTT |
National technical regulation on Electromagnetic Compatibility for Radio Equipment |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| QCVN 86:2019/BTTTT |
National technical regulation on electromagnetic compatibility for mobile terminals and ancillary equipment of digital cellular telecommunication systems |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 2 700 MHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| QCVN 86:2025/BKHCN |
National technical regulation on electromagnetic compatibility for mobile terminals and ancillary equipment of digital cellular telecommunication systems |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| QCVN 96:2015/BTTTT |
National technical regulation on electromagnetic compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| QCVN 112:2017/BTTTT |
National technical regulation
on general electromagnetic compatibility
for radio broadband data transmission equipment |
1 phase equipment, ≤ 16 A
RE : 30 MHz ∼ 6 GHz
CE : 150 kHz ∼ 30 MHz
ESD : Air ±8 kV Contact ±4 kV
RS : 80 MHz ∼ 6 GHz, 3 V/m
EFT : ±1 kV
Surge : ±2 kV
CS : 150 kHz ∼ 80 MHz, 3 V
V-DIP : 0 ~ 100 % |
소재지 |
| ▶ 에너지효율 |
| 기후에너지환경부 고시 제2026-137호, 효율관리기자재 운용규정 (2026.05.27) |
효율관리기자재 운용규정
제4조(효율관리 기자재의 지정 및 범위와 측정방법 등) ①의
20.(어댑터∙충전기)
26.(텔레비전수상기)
44.(모니터)
49.(컴퓨터)
50. (복합기) |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| 기후에너지환경부 고시 제2026-25호, 대기전력저감프로그램운용규정 (2026.01.23) |
대기전력저감 프로그램 운용규정
[제외항목]
제3조(대기전력저감 대상제품의 지정 등) ①의
19.(홈게이트웨이) |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62301:2011(Ed.2.0) |
Household electrical appliances - Measurement of standby power |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62301:2011 |
가정용 전기기기의 대기전력 측정 방법 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62087-1:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption - Part1:General |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62087-1:2015 |
오디오, 비디오 및 관련 기기 - 전력 소비량의 결정(측정 방법) - 제1부:일반사항 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62087-2:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption - Part2:Signal and media |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62087-2:2015 |
오디오, 비디오 및 관련 기기 - 전력 소비량의 결정(측정 방법) - 제2부:신호와 미디어 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62087-3:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption - Part3: Television sets |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62087-3:2015 |
오디오, 비디오 및 관련 기기 - 전력 소비량의 결정(측정 방법) - 제3부:텔레비전 세트 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62087-4:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption - Part4: Video recording equipment |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62087-4:2015 |
오디오, 비디오 및 관련 기기 - 전력 소비량의 결정(측정 방법) - 제4부:비디오 녹화 장비 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62087-6:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption - Part6: Audio equipment |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62087-6:2015 |
오디오, 비디오 및 관련 기기 - 전력 소비량의 결정(측정 방법) - 제6부:오디오 장비 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| IEC 62087-7:2018(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption - Part7: Computer monitors |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
| KS C IEC 62087-7:2018 |
오디오, 비디오 및 관련 기기 - 전력 소비량의 결정(측정 방법) - 제7부:컴퓨터 모니터 |
Input Voltage: Max. 300 V
Input Current: Max. 15 A
Input Wattage: Max. 5 000 W |
소재지 |
