| ▶ 전기재료 및 부품 |
| EN 61960-3:2017 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes
- Secondary lithium cells and batteries for portable applications
- Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| EN 62133-2:2017/A1:2021 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes
- Safety requirements for portable sealed secondary lithium cells, and for batteries made from them, for use in portable applications
- Part 2: Lithium systems
[Exception]
7.3.9 Design evaluation - Forced internal short circuit (cells) |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| IEC 61960-3:2017 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes
- Secondary lithium cells and batteries for portable applications
- Part 3: Prismatic and cylindrical lithium secondary cells, and batteries made from them |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| IEC 62133-2:2017+AMD1:2021 |
Secondary cells and batteries containing alkaline or other non-acid electrolytes
- Safety requirements for portable sealed secondary lithium cells, and for batteries made from them, for use in portable applications
- Part 2: Lithium systems
[Exception]
7.3.9 Design evaluation - Forced internal short circuit (cells) |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| IEC 62281:2019+AMD1:2021+AMD2:2023 |
Safety of primary and secondary lithium cells and batteries during transport |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| KC 62133-2:2025-10-27 |
휴대기기용 밀폐 리튬이차전지 안전
[제외항목]
7.3.9 강제 내부 단락 시험 |
전압: (0 ~ 60) V d.c.
전류: (0 ~ 132) A d.c.
온도: (-40 ~ 130) ℃
주파수: (7 ~ 200) Hz
하중: (0 ~ 13) kN |
부속시설-1 |
| ST/SG/AC.10/11/Rev.8:2023 |
Recommendations on the Transport of Dangerous Goods
- Manual of Tests and Criteria (Section 38.3 Lithium metal and lithium ion batteries) |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| ST/SG/AC.10/11/Rev.8/Amend.1:2025 |
Recommendations on the Transport of Dangerous Goods
- Manual of Tests and Criteria (Section 38.3 Lithium metal and lithium ion batteries) |
Voltage: (0 ~ 60) V d.c.
Current: (0 ~ 132) A d.c.
Temperature: (-40 ~ 130) ℃
Frequency: (7 ~ 200) Hz
Force: (0 ~ 13) kN |
부속시설-1 |
| ▶ 계측기기 |
| IEC 61010-1:2010+A1:2016+C1:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements
[Exception]
Cl.5.4.2: Equipment Ratings
CI.11.6: Specially protected equipment(IPX ~ IPX6)
Cl.11.7: Fluid pressure and leakage
Cl.12.3: Ultraviolet(UV) radiation
Cl.12.4: Microwave radiation
Cl.12.5: Sonic and ultrasonic pressure
Cl.12.6: Laser sources |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C
Earth Continuity: 55 A
(60 Hz) , 0.5 Ω (60 Hz)
Electric strength: 5 kV(60 Hz & DC) , 100 mA(60 Hz) , 10 mA (DC)
Temperature: (-40 ∼70) °C
Humidity: (17 ~ 96)
%R.H. |
부속시설-1 |
| IEC 61010-2-010:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
[Exception]
8.2.101 Dynamic test of horizontal heating surfaces of glass or ceramic material |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C |
부속시설-1 |
| IEC 61010-2-020:2016 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges
[Exception]
Cl.7.2: Moving parts
Cl.7.6: Expelled parts
Cl. Annex AA: Dynamic microbiological test method for bioseals |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C |
부속시설-1 |
| IEC 61010-2-030:2023 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits.
[Exception]
9.101.3 Protection against mains over voltage
K.4 Attention of transient over voltage levels |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C |
부속시설-1 |
| IEC 61010-2-040:2020 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
[Exception]
Cl.7.105: Pressure-retaining parts of a door
Cl.11.102: Instruments and indicating devices
Cl.13: Protection against liberated gases, pathogenic substances, explosion and implosion |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C |
부속시설-1 |
| IEC 61010-2-051:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
[Exception]
Cl.13: Protection against liberated gases and substances, explosion and implosion |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C |
부속시설-1 |
| IEC 61010-2-081:2019 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
Input Voltage: Max.600 V |
부속시설-1 |
| IEC 61010-2-101:2018 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
Input Voltage: Max.600 V |
부속시설-1 |
| KS C IEC 61010-1:2010 |
측정, 제어 및 시험실용 전기장비의 안전요구사항
-제1부: 일반 요구 사항
[제외항목]
Cl.11.7: 유체압력 및 누출
Cl.12.3: 자외선(UV) 방사
Cl.12.4: 전자파 방사
Cl.12.5: 음파 및 초음파압력
Cl.12.6: 레이저 광원
Cl.13: 방출가스 및 물질, 폭발 및 내파로부터의 보호 |
Input Voltage: Max.600 V
Input Current: Max. 100 A
Leakage Current: Max.10 mA
Temperature: (0 ~ 200) °C
Earth Continuity:
55 A (60 Hz), 0.5 Ω (60 Hz)
Electric strength: 5 kV(60 Hz & DC), 100 mA(60 Hz),
10 mA (DC)
Temperature: (-40 ∼70) °C
Humidity: (17 ~ 96) %R.H. |
부속시설-1 |
| ▶ 산업용 전기기기 |
| EN 60204-1:2018 |
Safety of Machinery - Electrical equipment of machines - Part1: General requirements |
전류: 0.2 ~ 10 A,
절연저항: 500 V, 1 GΩ,
내전압: AC 1000 V,
잔류전압: Max. 60 V |
부속시설-1 |
| EN 61558-1:2005+A1:2009 |
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests
[Exception]
Cl.17: Protection against harmful ingress of dust, solid objects and moisture
Cl.19.9: Ageing properties of rubber
Cl.19.12.3: Insulated winding wires construction
Cl.20: Components(Switch, Plugs, Fuse, Capacitor, Socket-outlet)
Cl.23: Terminals for external conductors
Cl.27.4: Resistance to tracking
Cl.28: Resistance to rusting |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-1:2007 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-12:2011 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-13:2009 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-15:2012 |
Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations
[Exception]
Cl.13.3 Inrush current |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-16:2009+A1:2013 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-2:2007 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-20:2011 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-23:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for power supply units for construction sites |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-4:2009 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-5:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-6:2009 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-7:2007 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys
[Exception]
Cl.16.101: Arrangement for impact test |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-8:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61558-2-9:2011 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61851-1:2011 |
Electric vehicle conductive charging system - Part 1: General requirements
[Exception]
Cl.9: Specific requirements for vehicle inlet, plug and socket-outlet
Cl.10: Charging cable assembly requirements |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN 61851-22:2002 |
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
[Exception]
Cl.11.1.7: Solar radiation (optional)
Cl.11.1.8: Saline mist (optional)
Cl.12: Specific socket-outlet/connector requirements |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN IEC 61558-1:2019 |
Safety of transformers, reactors, power supply units and combinations thereof -
Part 1: General requirements and tests
[Exception]
Cl.19.9: Ageing properties of rubber
Cl.19.12.3: Insulated winding wires
Cl.20: Components
Cl.23: Terminals for external conductors
Cl.27.4: Resistance to tracking
Cl.28: Resistance to rusting |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN IEC 61851-1:2019 |
Electric vehicle conductive charging system - Part 1: General requirements
[Exception]
Cl.9: Specific requirements for vehicle inlet, plug and socket-outlet
Cl.10: Charging cable assembly requirements |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| EN IEC 62040-1:2019+A11:2021 |
Uninterruptible power systems (UPS) - Part 1: Safety requirements
[Exception]
Cl.4.4: UPS loading during test
Cl.4.7.20 & Cl.5.1.3: Variable resistive load
Cl.5.1.4 & Cl.5.3.2: Test-generator / Test equipment for tracking index per IEC 60112 / Full draught oven, Cooling facility / Scratch test device with steel pin
Cl.7.3: Mechanical strength (4.2.8/RD Cathode ray tube)
Cl.6.2.1: General provisions for connection to power (AC Power Supply Cords)
Annex M.4: Ventilation of battery compartment (hydrogen gas concentration measurement)
Annex I.4: Load-induced change of reference potential (22 nF capacitors and resistive loads) |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
임펄스: 10/700 usec, 3 kV
전류: 20 A |
부속시설-1 |
| IEC 60204-1:2016+AMD1:2021 |
Safety of Machinery - Electrical equipment of machines - Part1: General requirements |
전류: 0.2 ~ 10 A,
절연저항: 500 V, 1 GΩ,
내전압: AC 1000 V,
잔류전압: Max. 60 V |
부속시설-1 |
| IEC 61558-1:2017 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
[Exception]
Cl.17: Protection against harmful ingress of dust, solid objects and moisture
Cl.19.9: Ageing properties of rubber
Cl.19.12.3: Insulated winding wires construction
Cl.20: Components(Switch, Plugs, Fuse, Capacitor, Socket-outlet)
Cl.23: Terminals for external conductors
Cl.27.4 Resistance to tracking
Cl.28: Resistance to rusting |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-1:2021 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-1: Particular requirements and tests for separating transformers and power supply units incorporating separating transformers for general applications |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-12:2011 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-13:2022 |
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-15:2022 |
Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations
[Exception]
Cl.13.3 Inrush current |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-16:2021 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units for general applications |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-2:2022 |
Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-20:2022 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-23:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for power supply units for construction sites |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-4:2021 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-5:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-6:2021 |
Safety of transformers, reactors, power
supply units and combinations thereof - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for general applications |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-7:2023 |
Safety of power transformers, power supply units and similar - Part 2-7: Particular requirements for transformers for toys
[Exception]
Cl.16.101: Arrangement for impact test |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-8:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61558-2-9:2010 |
Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 61851-1:2017 |
Electric vehicle conductive charging system -
Part 1: General requirements
[Exception]
Cl.9: Specific requirements for vehicle inlet, plug and socket-outlet
Cl.10: Charging cable assembly requirements |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
Withstand voltage : Max. AC/DC 5 kV |
부속시설-1 |
| IEC 62040-1:2017+A1:2021 |
Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS
[Exception]
Cl.4.4 UPS loading during test
Cl.4.7.20 & Cl.5.1.3 Variable resistive load
Cl.5.1.4 & Cl.5.3.2 Test-generator / Test equipment for tracking index per IEC 60112 / Full draught oven, Cooling facility / Scratch test device with steel pin
Cl.7.3 Mechanical strength (4.2.8/RD Cathode ray tube)
Cl.6.2.1 General provisions for connection to power (AC Power Supply Cords) Annex M.4 Ventilation of battery compartment(hydrogen gas concentration measurement)
Annex I.4 Load-induced change of reference potential (22 nF capacitors and resistive loads) |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
임펄스: 10/700 usec, 3 kV
전류: 20 A |
부속시설-1 |
| K 62040-1:2011 |
무정전 전원 시스템 제1부 : 일반 및 안전요구사항
[제외항목]
Cl.4.4 시험시 사용되는 UPS의 부하
Cl.4.7.20 & Cl.5.1.3 가변 저항 부하
Cl.7.3 기계적 강도 (4.2.8/RD CRT)
Cl.6.2.1 전력에 연결을 위한 일반 규정 (IEC 60227의 시험 치구)
부속서 M.4 과충전 조건
부속서 I.4 기준 전위 유도 부하 변화 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
임펄스: 10/700 usec, 3 kV
전류: 20 A |
부속시설-1 |
| KC 61558-1(개정:2015-09-23) |
전력용 변압기, 전원공급장치 및 유사기기의 안전 - 제1부: 일반요구사항 및 시험
[제외항목]
17: 유해한 먼지 고체물질 및 습기의 침입에 대한 보호
19.9: 입력과 출력 권선을 분리하는 절연 물질
19.12.3 절연된 권선 와이어
20: 부품(스위치, 플러그, 퓨즈, 소켓, 콘덴서)
23: 외부 전선 접속용 단자
27.4: 내트래킹성
28: 내부식성 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KC 61558-2-13(개정:2015-09-23) |
전력용 변압기, 전원공급장치 및 유사기기의 안전 - 제2-13부: 범용 단권 변압기의 개별 요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KC 61558-2-6(개정:2015-09-23) |
전력용 변압기, 전원공급장치 및 이와 유사한 기기의 안전 - 제2-6부: 범용 절연 변압기의 개별 요구 사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 60204-1:2016 |
기계류의 안전성 - 기계의 전기장비 - 제1부: 일반요구사항
제1부: 일반요구사항 |
전류: 0.2 ~ 10 A,
절연저항: 500 V, 1 GΩ,
내전압: AC 1000 V,
잔류전압: Max. 60 V |
부속시설-1 |
| KS C IEC 61558-1:2017 |
전력용 변압기, 전원장치 및 유사기기의 안전
- 제1부: 일반요구사항 및 시험
[제외항목]
17: 유해한 먼지 고체물질 및 습기의 침입에 대한 보호
19.9: 입력과 출력 권선을 분리하는 절연 물질
19.12.3 절연된 권선 와이어
20: 부품(스위치, 플러그, 퓨즈, 소켓, 콘덴서)
23: 외부 전선 접속용 단자
27.4: 내트레킹
28: 내부식성 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 20 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-1:2021 |
전력용 변압기, 전원장치, 리액터 및 유사기기의 안전 - 제 2-1부: 범용 복권변압기의 개별 요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-12:2011 |
전력용 변압기, 전원장치, 리액터 및 유사기기의 안전 - 제 2-12부: 정전압 변압기와 정전압 변압기 통합 전원장치의 개별요구사항 및 시험 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-13:2009 |
최대 공급전압 1 100 V용 변압기, 리액터, 전원장치 및 유사기기의 안전 - 제 2-13부: 자동 변압기와 자동 변압기 통합 전원장치의 개별 요구사항 및 시험 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-15:2011 |
전력 변압기, 리액터, 전원공급장치 및 이와 유사한 기기의 안전 - 제2-15부: 의료설비용 절연변압기의 개별요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-16:2021 |
공급전압 1100 V 이하인 변압기, 리액터, 전원장치 및 유사제품안전 - 제2-16부: 스위치 모드 전원장치용 변압기와 스위치 모드 전원장치의 시험 및 개별 요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-2:2007 |
전력용 변압기, 전원장치, 리액터 및 유사기기의 안전 - 제 2-2부: 제어변압기와 제어변압기 통합 전원장치의 개별요구사항 및 시험 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-20:2010 |
전력 변압기, 리액터, 전원공급장치 및 이와 유사한 기기의 안전 - 제2-20부: 소형 리액터의 개별요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-23:2010 |
전력 변압기, 전원공급장치 및 유사기기 안전 - 제2-23부: 건설현장용 변압기에 대한 개별요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-4:2021 |
최대 공급전압 1 100 V용 변압기, 리액터, 전원장치 및 유사기기의 안전 - 제2-4부: 절연변압기와 통합 전원장치의 개별 요구사항 및 시험 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-5:2010 |
전력용 변압기, 리액터, 전원공급장치 및 유사기기의 안전 - 제2-5부: 면도기용 변압기 및 전원장치의 개별요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-6:2021 |
최대 공급전압 1 100 V용 변압기, 리액터, 전원장치 및 유사기기의 안전 - 제 2-6부: 안전절연변압기와 안전절연변압기 통합 전원장치의 개별 요구사항 및 시험 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-7:2007 |
전력용 변압기, 전원장치, 리액터 및 유사기기의 안전 - 제2-7부: 장난감용 변압기 및 전원장치의 개별 요구사항 및 시험
[제외항목]
16.101: 완구용 변압기 충격 시험 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-8:2010 |
전력용 변압기, 리액터, 전원공급장치 및 유사기기의 안전 - 제2-8부: 벨 및 차임용 변압기의 개별요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| KS C IEC 61558-2-9:2010 |
전력 변압기, 리액터, 전원공급장치 및 유사기기의 안전 - 제2-9부: 3등급 손전등 및 텅스텐 필라멘트 전등용 변압기에 대한 개별요구사항 |
1Ø: 300 V, 10 kVA
3Ø: 440 V, 16 kVA
0 ℃ ~ 260 ℃
내전압 : Max. AC/DC 5 kV |
부속시설-1 |
| SAA AS 60204.1:2006 |
Safety of machinery - Electrical equipment of machines - General requirements |
전류: 0.2 ~ 10 A,
절연저항: 500 V, 1 GΩ,
내전압: AC 1000 V,
잔류전압: Max. 60 V |
부속시설-1 |
| ▶ 가정용 전기기기 |
| EN 50332-1:2013 |
Sound system equipment: Headphones and earphones associated with personal music players -
Maximum sound pressure level measurement methodology -
Part 1: General method for “one package equipment” |
Frequency range: 100 Hz ~ 16 kHz
Output voltage :20 mV ~ 200 mV
Signal: < 100 dB |
부속시설-1 |
| EN 50332-2:2013 |
Sound system equipment: Headphones and earphones associated with personal music players -
Maximum sound pressure level measurement methodology -
Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
Frequency range: 100 Hz ~ 16 kHz
Output voltage :20 mV ~ 200 mV
Signal: < 100 dB |
부속시설-1 |
| EN 60065:2014+A11:2017 |
Audio, video and similar electronic apparatus - Safety requirements
[Exception]
Cl.6.2: Laser radiation
Cl.13.7: Enclosed and sealed parts
Cl.14.2: Capacitors and RC-units
Cl.14.5: Protective devices
Cl.14.6: Switches
Cl.14.12: Optocouplers
Cl.14.13: Surge suppression varistors
Cl.15.1: Plugs and sockets
Cl.16: External flexible cords
Cl.18: Mechanical strength of picture tubes and protection against the effects of implosion
Annex A: Additional requirements for apparatus with protection against splashing water
Annex H: Insulating winding wires for use without interleaved insulation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-1:2012+A11:2014+A13:2017+A14:2019+A1:2019+A2:2019 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.24: Components
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-1:2012+A11:2014+A13:2017+A14:2019+A1:2019+A2:2019+A15:2021+A16:2023 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.22.57:UV sources
Cl.24: Components
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-11:2022+A11:2022 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
[Exception]
Cl.15.1: Moisture resistance
Annex BB: Tumble dryers that use a refrigerating system incorporating sealed motor-compressors for carrying out the drying process |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-12:2003+A1:2008+A11:2019+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-13:2010+A11:2012+A1:2019 |
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-15:2016+A11:2018 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-15:2016+A11:2018+A1:2021+A12:2021+A2:2021 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-16:2003+A1:2008+A2:2012+A11:2018 |
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-2:2010+A11:2012+A1:2013 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.15.101: Moisture resistance
Cl.21.101, 21.102, 21.103 and 21.104: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-21:2003+A1:2005+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-21:2021+A1:2021 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-24:2010+A1:2019+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
[Exception]
Cl.15.1: Moisture resistance
Cl.22.107, 22.107-1, 22.107-2, 22.8 and 22.9: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-26:2003+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-26:2003+A1:2008+A11:2020 |
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-28:2003+A1:2008+A11:2018 |
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-29:2004+A2:2010+A11:2018 |
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-29:2021+A1:2021 |
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-3:2016 |
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength
Cl.22.104 and 22.105: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-3:2016+A1:2020 |
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength
Cl.22.104 and 22.105: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-30:2009+A11:2012 |
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-30:2009+A11:2012+A1:2020+A12:2020+A13:2022+A2:2022 |
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-31:2014+A11:2023+A1:2023+A2:2023 |
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-32:2003+A1:2008+A2:2015 |
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-35:2016 |
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.22.108: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-35:2016+A1:2019+A2:2021 |
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.22.108: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-36:2002+A1:2004+A2:2008+A11:2012 |
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-37:2002+A1:2008+A11:2012+A12:2016 |
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-38:2003+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-39:2003+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
[Exception]
Cl.15.1: Moisture resistance
Cl.30.101: Resistance to heat and fire |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-41:2003+A1:2004+A2:2010 |
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-44:2002+A1:2008+A2:2012 |
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-45:2002+A1:2008+A2:2012+A11:2023 |
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Annex ZAA: Emission of acoustical noise |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-47:2003+A1:2008+A11:2012 |
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-47:2003+A1:2008+A11:2012+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-48:2003+A1:2008+A11:2012+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-49:2003+A1:2008+A11:2012+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-52:2003+A1:2008+A11:2010+A12:2019+A13:2023+A2:2023 |
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-54:2008+A11:2012+A1:2015 |
Household and similar electrical appliances - Safety - Part 2-54: particular requirements for surface-cleaning appliances for household use employing liquids or steam
[Exception]
Cl.15.1: Moisture resistance
Cl.20.101: Stability and mechanical hazards
Cl.21.101, 21.102 and 21.103: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-54:2008+A11:2012+A1:2015+A12:2021+A2:2021 |
Household and similar electrical appliances - Safety - Part 2-54: particular requirements for surface-cleaning appliances for household use employing liquids or steam
[Exception]
Cl.15.1: Moisture resistance
Cl.20.101: Stability and mechanical hazards
Cl.21.101, 21.102 and 21.103: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-6:2015 |
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-6:2015+A1:2020+A11:2020 |
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-61:2003+A1:2005+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.19.3.104: Abnormal operation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-61:2003+A1:2005+A2:2008+A12:2021 |
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.19.3.104: Abnormal operation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-64:2000+A1:2002 |
Safety of household and similar electrical appliances - Part 2-64: particular requirements for commercial electric kitchen machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-65:2003+A1:2008+A11:2012+A12:2022+A2:2022 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.32: Radiation, toxicity and similar hazards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-8:2015+A1:2016+A12:2022+A2:2022 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for electric shavers, hair clippers and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-80:2003+A1:2004+A2:2009 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-82:2003+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-84:2003+A1:2008+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-88:2002 |
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
[Exception]
Cl.15.1: Moisture resistance
Cl.22.7 and 22.106: Construction
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-9:2003+A1:2004+A2:2006+A12:2007+A13:2010 |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60335-2-98:2003+A1:2005+A2:2008+A11:2019 |
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 |
Information Technology Equipment - Safety - Part 1: General Requirements
[Exception]
2.10.6.2: Coated printed boards
3.2.5.1: AC Power supply cords
4.2.8: Cathode ray tubes
4.3.12: Flammable liquids
4.3.13: Radiation(UV Radiation, Laser Radiation)
7.4.3: Impulse test
Annex T: Guidance on protection against ingress of water
Annex U: Insulating winding wires for without interleaved insulation
Annex CC: Evaluation of integrated circuit (IC) current limiters |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60950-22:2017 |
Information technology equipment - Safety -
Part 22: Equipment to be installed outdoors
[Exception]
Cl.8.2: Resistance to ultra-violet radiation
Cl.8.3: Resistance to corrosion, water borne contaminants
Cl.9.1: Protection from moisture
Cl.9.3: Protection from excessive dust
Cl.11: Concentration of hydrogen gas
Annex A: Water-sulphur dioxide test
Annex B: Water spray test
Annex C: Ultraviolet light conditioning test
Annex D.2: Tensile strength and elongation tests
Annex D.3: Compression test
Annex D.4: Oil immersion test |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60950-23:2006 |
Information technology equipment - Safety -
Part 23: Large data storage equipment |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62233:2008 |
Measurement method for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62368-1:2014+A11:2017 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
Cl.4.4.4.6: Glass impact test
Cl.4.8.4.6: Crush test
Cl.5.4.5.2: Test method (surge test)
Cl.5.5.2: Capacitors and RC
Cl.5.5.3: Transformers
Cl.5.5.4: Optocouplers
Cl.5.5.5: Relays
Cl.5.5.6: Resistors
Cl.5.5.7: SPD
Cl.5.5.8: Insulation between the mains and an external circuit consisting of a coaxial cable
Cl.8.5.5: High pressure lamps
Cl.10.3: Safeguards against laser radiation
Cl.10.4: Safeguards against visible infra-red and ultra-violet radiation
Cl.10.5: Safeguards against x-radiation
Annex C: UV radiation
Annex D: Test generators
Annex G: Components
Annex H: Criteria for telephone ringing signals
Annex J: Insulated winding wires for use without interleaved insulation
Annex K: Safety interlocks
Annex M.6: Prevention of short-circuits and protection from other effects of electric current
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R: Limited short-circuit test
Annex S.3: Flammability test for bottom of a fire enclosure
Annex T.10: Glass fragmentation test
Annex U: Mechanical strength of CRTs and protection against the effects of implosion
Annex Y.5: Protection of equipment with an outdoor enclosure |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-1:2023+A11:2023 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.22.57: UV sources
Cl.24: Components
Cl.32.1: Radiation, toxicity and similar hazards (EN IEC 62311 test)
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-14:2023+A11:2023+A1:2023 |
Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
[Exception]
Cl.15.1: Moisture resistance
Cl.20.2, 20.101 and 20.Z101: Stability and mechanical hazards
Cl.22.104: Construction
Annex R: Software evaluation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-23:2023+A11:2023+A1:2023 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-24:2022+A11:2022 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
[Exception]
Cl.15.1: Moisture resistance
Cl.22.107, 22.107-1, 22.107-2, 22.8 and 22.9: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-32:2021 |
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-41:2021+A11:2021 |
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-43:2020+A11:2020 |
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-43:2020+A11:2020 |
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-75:2023+A11:2023+A1:2023+A2:2023 |
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
[Exception]
Cl.15.1: Moisture resistance
Annex AA: Ageing test apparatus for elastomeric parts
Annex ZE: Specific additional requirements for appliances and machines intended for commercial use |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-82:2022 |
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-84:2021+A11:2021 |
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-89:2022+A11:2022 |
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
[Exception]
Cl.15.1: Moisture resistance
Cl.22.Z108 and 22.Z109: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-9:2023+A11:2023 |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60335-2-97:2023+A11:2023+A1:2023 |
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting
Cl.32.Z101: Radiation, toxicity and similar hazards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 62115:2020+A11:2020 |
Electric toys - Safety
[Exception]
Cl.13.10: Speed limitation of electric ride-on toys
Cl.16: Component
Cl.19.2.2: Resistance to heat and fire
Annex C: Automatic controls and switches
Annex E: Toy incorporating lasers and light-emitting diodes |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 62368-1:2020+A11:2020 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
Cl.4.4.4.6: Glass impact test
Cl.4.8.4.6: Crush test
Cl.5.4.5.2: Test method (surge test)
Cl.5.5.2: Capacitors and RC
Cl.5.5.3: Transformers
Cl.5.5.4: Optocouplers
Cl.5.5.5: Relays
Cl.5.5.6: Resistors
Cl.5.5.7: SPD
Cl.5.5.8: Insulation between the mains and an external circuit consisting of a coaxial cable
Cl.8.5.5: High pressure lamps
Cl.10.3 Safeguards against laser radiation
Cl.10.4 Safeguards against visible infra-red and ultra-violet radiation
Cl.10.5 Safeguards against x-radiation
Annex C: UV radiation
Annex D: Test generators
Annex G: Components
Annex H: Criteria for telephone ringing signals
Annex J: Insulated winding wires for use without interleaved insulation
Annex K: Safety interlocks
Annex M.6: Prevention of short-circuits and protection from other effects of electric current
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R: Limited short-circuit test
Annex S.3: Flammability test for bottom of a fire enclosure
Annex T.10: Glass fragmentation test
Annex U: Mechanical strength of CRTs and protection against the effects of implosion
Annex Y.5: Protection of equipment with an outdoor enclosure |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 62368-3:2020 |
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60065:2014 |
Audio, video and similar electronic apparatus - Safety requirements
[Exception]
Cl.6.2: Laser radiation
Cl.13.7: enclosed and sealed parts
Cl.14.3: Capacitors and RC-units
Cl.14.6: Protective devices
Cl.14.7: Switches
Cl.14.12: Optocouplers
Cl.14.13: Surge suppression varistors
Cl.15.1: Plugs and sockets
Cl.16: External flexible cords
Cl.18: Mechanical strength of picture tubes and protection against the effects of implosion
Annex A: Additional requirements for apparatus with protection against splashing
water
Annex H: Insulating winding wires for use without interleaved insulation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-1:2010 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.23.3: Internal wiring
Cl.24: Components
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-1:2010+A1:2013 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.23.3: Internal wiring
Cl.24: Components
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-1:2010+A1:2013+A2:2016 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.23.3: Internal wiring
Cl.24: Components
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-1:2020 |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.23.3: Internal wiring
Cl.24: Components
Cl.24.1.10: UV lamp and lamp systems
Cl.32.2: UV hazards
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards
Annex R: Software evaluation
Annex T: UV-C radiation effect on non-metallic materials |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-11:2008 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
[Exception]
Cl.15.1: Moisture resistance
Annex BB: Tumble dryers that use a refrigerating system incorporating sealed motor-compressors for carrying out the drying process |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-11:2008+A1:2012+A2:2015 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
[Exception]
Cl.15.1: Moisture resistance
Annex BB: Tumble dryers that use a refrigerating system incorporating sealed motor-compressors for carrying out the drying process |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-11:2019 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
[Exception]
Cl.15.1: Moisture resistance
Annex BB: Tumble dryers that use a refrigerating system incorporating sealed motor-compressors for carrying out the drying process |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-11:2024 |
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
[Exception]
Cl.15.1: Moisture resistance
Cl.20.102: Stability and mechanical hazards
Cl.24.8: Components
Annex BB: Tumble dryers that use a refrigerating system incorporating sealed motor-compressors for carrying out the drying process |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-12:2002+A1:2008+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-12:2024 |
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-13:2009 |
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-13:2009+A1:2016 |
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-13:2021 |
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-14:2006+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-14:2006+A1:2008+A2:2012 |
Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-14:2016+A1:2019 |
Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-14:2025 |
Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
[Exception]
Cl.15.1: Moisture resistance
Cl.20.116: Stability and mechanical hazards
Annex R: Software evaluation
Annex AA: Tests on sieves of centrifugal juicers |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-15:2002+A1:2005+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-15:2012 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-15:2012+A1:2016+A2:2018 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-15:2024 |
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
[Exception]
Cl.15.1: Moisture resistance
Cl.22.108.1, Cl.22.108.2 and Cl.22.109: Construction
Annex R: Software evaluation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-16:2002+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-16:2002+A1:2008+A2:2011 |
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-16:2022 |
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
[Exception]
Cl.15.1 and 15.2: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-2:2009 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.15.101: Moisture resistance
Cl.21.101, 21.102, 21.103 and 21.104: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-2:2009+A1:2012 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.15.101: Moisture resistance
Cl.21.101, 21.102, 21.103 and 21.104: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-2:2009+A1:2012+A2:2016 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.15.101: Moisture resistance
Cl.21.101, 21.102, 21.103 and 21.104: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-2:2019 |
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.15.101: Moisture resistance
Cl.21.101, 21.102, 21.103 and 21.104: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-21:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-21:2012+A1:2018 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-21:2022 |
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-23:2003+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-23:2003+A1:2008+A2:2012 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-23:2016+A1:2019 |
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-24:2010 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
[Exception]
Cl.15.1: Moisture resistance
Cl.22.107,22.107-1,22.107-2, 22.8 and 22.9: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-24:2010+A1:2012+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
[Exception]
Cl.15.1: Moisture resistance
Cl.22.107,22.107-1,22.107-2, 22.8 and 22.9: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-24:2020 |
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
[Exception]
Cl.15.1: Moisture resistance
Cl.22.107,22.107-1,22.107-2, 22.8 and 22.9: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-26:2002+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-28:2002+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-28:2021 |
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-29:2002+A1:2004+A2:2009 |
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-29:2016+A1:2019 |
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-3:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength
Cl.22.104 and 22.105: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-3:2012+A1:2015 |
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength
Cl.22.104 and 22.105: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-3:2022 |
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength
Cl.22.13: Construction
Cl.22.104 and 22.105: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-30:2009 |
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.19.103, 19.108, 19.111 and 19.112: Abnormal operation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-30:2009+A1:2016 |
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.19.103, 19.108, 19.111 and 19.112: Abnormal operation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-30:2009+A1:2016+A2:2021 |
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.19.103, 19.108, 19.111 and 19.112: Abnormal operation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-31:2002+A1:2006+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-31:2012 |
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-31:2012+A1:2016+A2:2018 |
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-31:2024 |
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods
[Exception]
Cl.15.1: Moisture resistance
Cl.22.14: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-32:2002+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-32:2002+A1:2008+A2:2013 |
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-32:2019 |
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-32:2024 |
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-35:2002+A1:2006+A2:2009 |
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.22.108: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-35:2012+A1:2016 |
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.22.108: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-35:2012+A1:2016+A2:2020 |
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.22.108: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-36:2017 |
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-36:2021 |
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-37:2017 |
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-37:2021 |
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-38:2002+A1:2008+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-38:2021 |
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
[Exception]
Cl.15.1: Moisture resistance
Cl.21.101: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-39:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
[Exception]
Cl.15.1: Moisture resistance
Cl.30.101: Resistance to heat and fire |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-39:2012+A1:2017 |
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
[Exception]
Cl.15.1: Moisture resistance
Cl.30.101: Resistance to heat and fire |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-39:2021 |
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
[Exception]
Cl.15.1: Moisture resistance
Cl.30.101: Resistance to heat and fire |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-41:2002+A1:2004+A2:2009 |
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-41:2012 |
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-41:2024 |
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
[Exception]
Cl.15.1: Moisture resistance
Cl.22.107: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-43:2017 |
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-43:2024 |
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-44:2002+A1:2008+A2:2011 |
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-44:2021 |
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-45:2002+A1:2008 |
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-45:2002+A1:2008+A2:2011 |
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-47:2002+A1:2008+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-47:2021 |
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-48:2002+A1:2008+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-48:2021 |
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-49:2002+A1:2008+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-49:2021 |
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-52:2002+A1:2008+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-52:2021 |
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-54:2008+A15:2015+A2:2019 |
Household and similar electrical appliances - Safety - Part 2-54: particular requirements for surface-cleaning appliances for household use employing liquids or steam
[Exception]
Cl.15.1: Moisture resistance
Cl.20.101: Stability and mechanical hazards
Cl.21.101, 21.102 and 21.103: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-54:2022 |
Household and similar electrical appliances - Safety - Part 2-54: particular requirements for surface-cleaning appliances for household use employing liquids or steam
[Exception]
Cl.15.1: Moisture resistance
Cl.20.101: Stability and mechanical hazards
Cl.21.101, 21.102 and 21.103: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-59:2002+A1:2006+A2:2009 |
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting
Cl.32: Radiation, toxicity and similar hazards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-59:2021 |
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting
Cl.32: Radiation, toxicity and similar hazards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-6:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-6:2014+A1:2018 |
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-6:2024 |
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.22.62: Construction
Cl.31: Resistance to rusting
Cl.32.101: Radiation. Toxicity and similar hazards.
Annex R: Software evaluation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-61:2002+A1:2005+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters
[Exception]
Cl.15.1: Moisture resistance
Cl.19.3.104: Abnormal operation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-64:2002+A1:2007+A2:2017 |
Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-64:2021+AMD1:2024 |
Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-65:2002+A1:2008+A2:2015 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.32: Radiation, toxicity and similar hazards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-65:2023 |
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.32: Radiation, toxicity and similar hazards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-75:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
[Exception]
Cl.15.1: Moisture resistance
Annex AA: Ageing test apparatus for elastomeric parts |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-75:2012+A15:2015+A2:2018 |
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
[Exception]
Cl.15.1: Moisture resistance
Annex AA: Ageing test apparatus for elastomeric parts |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-75:2024 |
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
[Exception]
Cl.15.1: Moisture resistance
Cl.22.110, Cl.22.116 and Cl.22.118: Construction
Annex R: Software evaluation
Annex AA: Ageing test apparatus for elastomeric parts |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-8:2002+A1:2005+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-8:2012+A1:2015+A2:2018 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-8:2022 |
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.21.102 and 21.103: Mechanical strength |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-80:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-80:2015 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-80:2024 |
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
[Exception]
Cl.15.1: Moisture resistance
Cl.22.103.6: Construction |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-82:2017 |
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-82:2017+A1:2020 |
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-82:2024 |
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting
Cl.32.101: Radiation, toxicity and similar hazards
Annex R: Software evaluation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-84:2002+A1:2008+A2:2013 |
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-84:2019 |
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-88:2002 |
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems
[Exception]
Cl.15.1: Moisture resistance
Cl.22.7 and 22.106: Construction
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-89:2010 |
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-89:2010+A1:2012+A2:2015 |
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-89:2019 |
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-9:2008 |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-9:2008+A1:2012 |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-9:2008+A1:2012+A2:2016 |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-9:2019 |
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-97:2016 |
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-97:2016+A1:2019 |
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
[Exception]
Cl.15.1: Moisture resistance
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-97:2023 |
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
[Exception]
Cl.15.1: Moisture resistance
Cl.20.104.5: Stability and mechanical hazards
Cl.22.102: Construction
Cl.24.1.101: Components
Cl.31: Resistance to rusting |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-98:2002+A1:2004+A2:2008 |
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60335-2-98:2023 |
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
[Exception]
Cl.15.1: Moisture resistance |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60950-1:2005+A1:2009+A2:2013 |
Information Technology Equipment - Safety - Part 1: General Requirements
[Exception]
2.10.6.2: Coated printed boards
3.2.5.1: AC Power supply cords
4.2.8: Cathode ray tubes
4.3.12: Flammable liquids
4.3.13: Radiation (UV Radiation, Laser Radiation, Laser diodes, LEDs)
7.4.3: Impulse test
Annex U: Insulating winding wires for use without interleaved insulation
Annex T: Guidance on protection against ingress of water
Annex AA: Mandrel test
Annex CC: Evaluation of integrated circuit (IC) current limiters |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60950-21:2002 |
Information technology equipment - Safety -
Part 21: Remote power feeding |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60950-22:2016 |
Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
[Exception]
Cl.8.2: Resistance to ultra-violet radiation Cl.8.3: Resistance to corrosion, water borne contaminants
Cl.9.1: Protection from moisture
Cl.9.3: Protection from excessive dust
Cl.11: Concentration of hydrogen gas
Annex A: Water-sulphur dioxide test
Annex B: Water spray test
Annex C: Ultra violet light conditioning test
Annex D: Gasket Tests |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60950-23:2005 |
Information technology equipment - Safety -
Part 23: Large data storage equipment |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62115:2017 |
Electric toys - Safety
[Exception]
Cl.16: Component
Cl.19.2.2: Resistance to heat and fire
Annex B: Needle flame test
Annex C: Automatic controls and switches
Annex E: Toys incorporating lasers and light-emitting diodes |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62233:2005 |
Measurement method for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
Cl.4.4.3.6: Glass impact test
Cl.5.4.5.2: Test method (surge test)
Cl.5.5.2: Capacitors and RC
Cl.5.5.3: Transformers
Cl.5.5.4: Optocouplers
Cl.5.5.5: Relays
Cl.5.5.6: Resistors
Cl.5.5.7: SPDs
Cl.5.5.8: Insulation between the mains and an external circuit consisting of a coaxial cable
Cl.8.5.5: High pressure lamps
Cl.10.3 Safeguards against laser radiation
Cl.10.4 Safeguards against visible infra-red and ultra-violet radiation
Cl.10.5 Safeguards against x-radiation
Annex C: UV radiation
Annex D: Test generators
Annex G: Components
Annex H: Criteria for telephone ringing signals
Annex J: Insulated winding wires for use without interleaved insulation
Annex K: Safety interlocks
Annex M.6: Prevention of short-circuits and protection from other effects of electric current
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R: Limited short-circuit test
Annex S.3: Flammability test for bottom of a fire enclosure
Annex T.10: Glass fragmentation test
Annex U: Mechanical strength of CRTs and protection against the effects of implosion
Annex Y.5: Protection of equipment with an outdoor enclosure |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62368-1:2023 |
Audio/video, information and communication technology equipment - Part 1: Safety requirements
[Exception]
Cl.4.4.3.6: Glass impact test
Cl.5.4.5.2: Test method (surge test)
Cl.5.5.2: Capacitors and RC
Cl.5.5.3: Transformers
Cl.5.5.4: Optocouplers
Cl.5.5.5: Relays
Cl.5.5.6: Resistors
Cl.5.5.7: SPDs
Cl.5.5.8: Insulation between the mains and an external circuit consisting of a coaxial cable
Cl.8.5.5: High pressure lamps
Cl.10.3 Safeguards against laser radiation
Cl.10.4 Safeguards against visible infra-red and ultra-violet radiation
Cl.10.5 Safeguards against x-radiation
Annex C: UV radiation
Annex D: Test generators
Annex G: Components
Annex H: Criteria for telephone ringing signals
Annex J: Insulated winding wires for use without interleaved insulation
Annex K: Safety interlocks
Annex M.6: Prevention of short-circuits and protection from other effects of electric current
Annex M.7: Risk of explosion from lead acid and NiCd batteries
Annex M.8: Protection against internal ignition from external spark sources of batteries with aqueous electrolyte
Annex R: Limited short-circuit test
Annex S.3: Flammability test for bottom of a fire enclosure
Annex T.10: Glass fragmentation test
Annex U: Mechanical strength of CRTs and protection against the effects of implosion
Annex Y.5: Protection of equipment with an outdoor enclosure |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62368-3:2017 |
Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62684:2018 |
Interoperability specifications of common external power supply (EPS) for use with data - enabled mobile telephones |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| J 60065:2016(H29) |
Audio, video and similar electronic apparatus - Safety requirements
[Exception]
Cl.6.2: Laser radiation
Cl.13.7: enclosed and sealed parts
Cl.14.2: Capacitors and RC-units
Cl.14.5: Protective devices
Cl.14.6: Switches
Cl.16: External flexible cords
Cl.18: Mechanical strength of picture tubes and protection against the effects of implosion
Annex A: Additional requirements for apparatus with protection against splashing water |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| J 60335-1:2014(H27) |
Household and similar electrical appliances - Safety - Part 1: General requirements
[Exception]
Cl.15.1: Moisture resistance
Cl.19.11.4.7: Abnormal operation
Cl.22.32: Construction
Cl.23.3: Internal wiring
Cl.24: Components
Annex F: Capacitors
Annex H: Switches
Annex J: Coated printed circuit boards |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| J 60950-1:2016(H29) |
Information Technology Equipment Safety - Safety - Part 1: General requirements
[Exception]
2.10.6: Coated printed boards
4.2.8: Cathode ray tubes
4.3.12: Flammable liquids
4.3.13: Radiation (Laser Radiation)
7.3.3: Impulse test
Annex U: Insulating winding wires
Annex AA: Mandrel test
Annex CC: Evaluation of integrated circuit (IC) current limiters |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 10001:2006 |
휴대전화 배터리 충전기
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 10007:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 전기 정수기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 10009:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 초음파세척기의 개별요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 10012:2013 |
가정용 및 이와 유사한 전기기기의 안전성 - 전기헬스기구 및 이와 유사한 기기의 개별요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 10015:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 물수건 마는기기 및 이와 유사한 기기의 개별요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 10016:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 물수건 포장기기 및 이와 유사한 기기의 개별요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 60335-2-9(6.1):2013 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-9부: 그릴, 토스터기 및 이와 유사한 휴대용 조리 기기의 개별 요구 사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| K 70000:2008 |
가정용 및 이와 유사한 전기기기의 안전 - 전기소독기 및 이와 유사한 전기기기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 10018:2021-10-12 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-9부: 그릴, 토스터기 및 이와 유사한 휴대용 조리 기기의 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-1:2022-06-10 |
가정용 및 이와 유사한 전기기기의 안전성 - 제1부: 일반 요구사항
[제외항목]
15.1: 내습성
22.32: 구조
22.57: UV 소스
24: 부품
32: 방사선, 유독성 이와 유사한 위험성
부속서 F: 커패시터
부속서 H: 스위치
부속서 J: 코팅된 인쇄회로기판
부속서 R: 소프트웨어 평가
부속서 T: 비금속 재료에 대한 UV-C 방사 효과 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-11:2021-02-08 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-11부: 회전식 건조기의 개별 요구 사항
[제외항목]
15.1: 내습성
부속서 B: 건조공정을 수행하기 위해 밀폐된 전동기-압축기를 내장한 냉동장치를 사용하는 회전식 건조기 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-12:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-12부: 보온플레이트 및 이와 유사한 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-13:2016-02-19 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-13부: 전기튀김기, 전기프라이팬 및 이와 유사한 기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-14:2016-10-14 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-14부: 주방기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-15:2022-02-16 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-15부: 액체가열용 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-16:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-16부: 음식물 쓰레기 처리기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-2:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-2부: 전기 진공청소기 및 물 흡입 청소기의 개별 요구사항
[제외항목]
15.1: 내습성
21.101, 21.102, 21.103 및 21.104: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-21:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-21부: 전기온수기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-23:2022-01-06 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-23부: 피부손질 또는 모발손질용 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-24:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-24부: 전기냉장고, 아이스크림 기기 및 제빙기의 개별 요구사항
[제외항목]
15.1: 내습성
.22.107, 22.107-1, 22.107-2, 22.8 및 22.9: 구조 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-26:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-26부: 전기시계의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-28:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-28부: 전기재봉기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-29:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-29부: 배터리 충전기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-3:2016-02-19 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-3부: 전기 다리미의 개별 요구 사항
[제외항목]
15.1: 내습성
21.101: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-30:2016-02-19 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-30부: 실내용 난방기의 개별 요구사항
[제외항목]
15.1: 내습성
19.103, 19.108, 19.111 및 19.112: 이상운전 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-31:2022-02-16 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-31부: 레인지 후드의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-32:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-32부: 전기맛사지기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-35:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-35부: 순간온수기의 개별 요구사항
[제외항목]
15.1: 내습성
22.108: 구조 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-36:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-36부: 상업용 전기 조리용레인지, 오븐, 호브 및 호브 소자에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-37:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-37부: 상업용 전기 튀김기에 대한 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-38:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-38부: 상업용 전기 그리들 그릴에 대한 개별 요구사항
[제외항목]
15.1: 내습성
21.101: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-39:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-39부: 상업용 전기 다목적 조리팬의 개별 요구 사항
[제외항목]
15.1: 내습성
30.101: 내열성 및 내화성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-41:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-41부: 전기 펌프의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-43:2022-02-16 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-43부: 의류 건조기 및 타월걸이의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-44:2021-10-12 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-44부: 전기 주름 펴기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-45:2016-02-19 |
가정용 및 이와 유사한 전기기기의 안전성 -제2-45부: 휴대형 가열기구 및 이와 유사한 기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-47:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-47부: 상업용 전기 끓임팬의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-48:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-48부: 상업용 전기그릴과 토스트기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-49:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-49부: 상업용 전기 보온찬장의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-52:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-52부: 전기 구강위생기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-54:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-54부: 액체 또는 증기 사용 가정용 표면 청소기의 개별 요구 사항
[제외항목]
15.1: 내습성
20.101: 안정성 및 기계적위험
21.101, 21.102 및 21.103: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-6:2022-02-16 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-6부: 거치형 조리레인지, 호브, 오븐 및 이와 유사한 기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-61:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-61부: 축열식 실내용 난방기의 개별 요구사항
[제외항목]
15.1: 내습성
19.3.104: 이상운전 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-64:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-64부: 상업용 전기 주방 기기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-65:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-65부: 공기청정기의 개별 요구사항
[제외항목]
15.1: 내습성
32: 방사선, 유독성 이와 유사한 위험성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-75:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-75부: 산업용 디스펜싱기기 및 자동판매기에 대한 개별 요구사항
[제외항목]
15.1: 내습성
부속서 AA: 중합체(Elastomeric)에 대한 노화시험 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-8:2016-02-19 |
가정용 및 이와 유사한 전기기기의 안전성 -제2-8부: 면도기, 이발기 및 이와 유사한 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-80:2022-01-06 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-80부: 전기팬(fan)의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-82:2022-02-16 |
가정용 및 이와 유사한 전기기기의 안전성- 제2-82부: 오락기기 및 개인용 서비스기기의 개별 요구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-84:2022-10-25 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-84부: 화장실용 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-88:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-88부: 난방, 환기등에 사용하기 위한 가습기의 개별 요구사항
[제외항목]
15.1: 내습성
22.7 및 22.106: 구조
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-89:2015-07-24 |
가정용 및 이와 유사한 전기기기의 안전성 제2-89부: 내장형 또는 원격 냉각 압축기를 가진 상업용 냉동기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-97:2015-09-23 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-97부: 회전식 셔터, 차양, 블라인드 및 이와 유사한 구동장치의 개별 용구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60335-2-98:2025-10-27 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-98부: 가습기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 62368-1:2025-10-27 |
오디오/비디오 및 정보통신기술기기 제1부 : 안전 요구 사항
[제외항목]
4.4.3.6: 유리 충격 시험
4.8.4.6: 압괴(분쇄) 시험
5.4.5.2: 시험방법
5.5.2: 커패시터 및 RC 장치
5.5.3: 변압기(Transformers)
5.5.4: 옵토커플러(Optocouplers)
5.5.5: 릴레이(Relays)
5.5.6: 저항기(Resistors)
5.5.7: SPDs(서지 보호 장치)
5.5.8: 주전원과 동축 케이블로 구성된 외부 회로 사이의 절연
8.5.5: 고전압 램프
10.3: 레이저 방사(선)에 대한 보호수단
10.4: 램프 및 램프 시스템(LED 타입 포함)의 광 방사에 대한 보호수단
10.5: 엑스선(X-선)에 대한 보호수단
부속서 C: 자외선(UV radiation)
부속서 D: 시험 발생기
부속서 G: 부품
부속서 H: 전화벨 신호에 대한 기준
부속서 J: 중간절연 없이 사용하기 위한 절연 권선 전선
부속서 K: 안전 인터로크
부속서 M.6: 단락에 대한 보호수단
부속서 M.7: 납축(납 산성) 및 니켈 카드뮴 배터리의 폭발 위험
부속서 M.8: 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R: 제한 단락회로 시험
부속서 S.3: 방화용 엔클로저의 밑면에 대한 난연성 시험
부속서 T.10: 유리 파쇄 시험
부속서 U: CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y.5: 옥외용 엔클로저 내의 기기보호 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60065:2014 |
오디오, 비디오기기 및 이와 유사한 전자기기의 안전
[제외항목]
6.2: 레이저방사
13.7: 밀봉 및 용접밀폐부분
14.2: 캐패시터 및 저항-캐패시터
14.5: 보호장치
14.6: 스위치
16: 외부유연성코드
18: 브라운관의 기계적강도 및 폭축의 영향에 대한 보호
부속서 A: 물 튀김에 대한 보호가 된 기기의 부가적인 요구사항
부속서 H: 사이에 끼우는 절연없이 사용하는 절연된 권선용 전선 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-1:2016 |
가정용 및 이와 유사한 전기기기의 안전성 - 제1부: 일반 요구사항
[제외항목]
15.1: 내습성
22.32: 구조
22.57: UV 소스
24: 부품
31: 내부식성
부속서 F: 커패시터
부속서 H: 스위치
부속서 J: 코팅된 인쇄회로기판
부속서 R: 소프트웨어 평가
부속서 T: 비금속 재료에 대한 UV-C 방사 효과 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-11:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-11부: 회전식 건조기의 개별 요구 사항
[제외항목]
15.1: 내습성
부속서 B: 건조공정을 수행하기 위해 밀폐된 전동기-압축기를 내장한 냉동장치를 사용하는 회전식 건조기 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-12:2008 |
가정용 및 이와 유사한 전기기기의 안전성 -제2-12부: 보온플레이트 및 이와 유사한 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-13:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-13부: 전기 튀김기, 전기 프라이팬 및 이와 유사한 기기의 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-14:2016 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-14부: 주방기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-15:2016 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-15부: 액체가열용 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-16:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-16부: 음식물 쓰레기 처리기의 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-2:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-2부: 전기 진공청소기 및 물 흡입 청소기의 개별 요구사항
[제외항목]
15.1: 내습성
15.101: 내습성
21.101, 21.102, 21.103 과 21.104: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-21:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-21부: 전기온수기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-23:2019 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-23부: 피부손질 또는 모발 손질용 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-24:2017 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-24부: 전기냉장고 및 제빙기의 개별 요구사항
[제외항목]
15.1: 내습성
22.107, 22.107-1, 22.107-2, 22.8 및 22.9: 구조 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-26:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-26부: 전기시계의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-28:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-28부: 전기재봉기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-29:2016 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-29부: 배터리 충전기 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-3:2015 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-3부: 전기 다리미의 개별 요구사항
[제외항목]
15.1: 내습성
21.101: 기계적강도
22.104 및 22.105: 구조 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-30:2009 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-30부: 실내용 난방기의 개별 요구사항
[제외항목]
15.1: 내습성
19.103, 19.108, 19.111 및 19.112: 이상운전 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-31:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-31부: 레인지 후드의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-32:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-32부: 전기 마사지기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-35:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-35부: 순간온수기의 개별 요구사항
[제외항목]
15.1: 내습성
22.108: 구조 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-36:2017 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-36부: 상업용 전기 조리용레인지, 오븐, 호브 및 호브 소자에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-37:2017 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-37부: 상업용 전기 튀김기에 대한 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-38:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-38부: 상업용 전기 그리들 그릴에 대한 개별 요구사항
[제외항목]
15.1: 내습성
21.101: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-39:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-39부: 상업용 전기 다목적 조리 팬의 개별 요구 사항
[제외항목]
15.1: 내습성
30.101: 내열성 및 내화성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-41:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-41부: 전기 펌프의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-43:2017 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-43부: 의류 건조기 및 타월걸이의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-44:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-44부: 전기 주름 펴기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-45:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-45부: 휴대형 가열 기구 및 이와 유사한 기기의 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-47:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-47부: 상업용 전기 끓임 팬의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-48:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-48부: 상업용 전기그릴과 토스트기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-49:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-49부: 상업용 전기 보온찬장의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-52:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-52부: 전기 구강 위생기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-54:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-54부: 액체 또는 증기 사용 가정용 표면 청소기의 개별 요구 사항
[제외항목]
15.1: 내습성
20.101: 안정성 및 기계적위험
21.101, 21.102 및 21.103: 기계적강도 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-6:2018 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-6부: 거치형 조리레인지, 호브, 오븐 및 이와 유사한 기기의 개별 요구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-61:2009 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-61부: 축열식 실내용 난방기의 개별 요구사항
[제외항목]
15.1: 내습성
19.3.104: 이상운전 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-64:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-64부: 상업용 전기 주방 기기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-65:2015 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-65부: 공기청정기의 개별 요구사항
[제외항목]
15.1: 내습성
32.1: 방사선, 유독성 이와 유사한 위험성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-75:2014 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-75부: 산업용 디스펜싱기기 및 자동판매기에 대한 개별 요구사항
[제외항목]
15.1: 내습성
부속서 AA: 중합체(Elastomeric)에 대한 노화시험 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-8:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-8부: 면도기, 이발기 및 이와 유사한 전기 기기의 개별 요구 사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-80:2015 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-80부: 전기팬(fan)의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-82:2020 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-82부: 오락기기 및 개인용 서비스기기의 개별 요구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-84:2019 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-84부: 화장실용 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-88:2002 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-88부: 난방, 환기등에 사용하기 위한 가습기의 개별 요구사항
[제외항목]
15.1: 내습성
22.7 및 22.106: 구조
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-89:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-89부: 내장형 또는 원격 냉각 압축기를 가진 상업용 냉동기기의 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-9:2012 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-9부: 토스터, 그릴, 로스터 및 이와 유사한 전기기기의 개별 요구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-97:2019 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-97부: 회전식 셔터, 차양, 블라인드 및 이와 유사한 구동장치의 개별용구사항
[제외항목]
15.1: 내습성
31: 내부식성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60335-2-98:2008 |
가정용 및 이와 유사한 전기기기의 안전성 - 제2-98부: 가습기에 대한 개별 요구사항
[제외항목]
15.1: 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60950-1:2014 |
정보기술기기의 안전성 - 제1부: 일반요구사항
[제외항목]
2.10.6: 코팅된 인쇄회로기판
3.2.5.1: 교류 주전원 코드
4.2.8: 브라운관
4.3.12: 가연성액체
4.3.13: 방사 (자외선, 레이저)
7.3.3: 임펄스 시험
부속서 T: 방수에 관한 지침 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 60950-22:2014 |
정보 기기 - 안전 - 제22부: 옥외 설치기기
[제외항목]
8.2: 자외선 방사에 대한 내성
8.3: 내부식성
9.1: 습기에 대한 보호
9.3: 많은 먼지로부터의 보호
11: 노출된 배터리를 포함하는 옥외용기기
부속서 A: 수분이 포화된 이산화황 대기
부속서 B: 물 분사 시험
부속서 C: 자외선 조건 시험
부속서 D: 가스켓 시험 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 62115:2017 |
전기 장난감 - 안전성
[제외항목]
16: 부품
19.2.2: 내열성 및 내화성
부속서 B: 니들-프레임시험
부속서 C: 자동 제어장치 및 스위치
부속서 E: 레이저와 발광 다이오드를 포함하는 장난감 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C IEC 62368-1:2018 |
오디오/비디오, 정보통신기술기기 - 1부: 안전 요구사항
[제외항목]
4.4.3.6: 유리 충격 시험
4.8.4.6: 압괴(분쇄) 시험
5.4.5.2: 시험방법
5.5.2: 커패시터 및 RC 장치
5.5.3: 변압기(Transformers)
5.5.4: 옵토커플러(Optocouplers)
5.5.5: 릴레이(Relays)
5.5.6: 저항기(Resistors)
5.5.7: SPDs(서지 보호 장치)
5.5.8: 주전원과 동축 케이블로 구성된 외부 회로 사이의 절연
8.5.5: 고전압 램프
10.3 레이저 방사(선)에 대한 보호수단
10.4 램프 및 램프 시스템(LED 타입 포함)의 광 방사에 대한 보호수단
10.5 엑스선(X-선)에 대한 보호수단
부속서 C: 자외선(UV radiation)
부속서 D: 시험 발생기
부속서 G: 부품
부속서 H: 전화벨 신호에 대한 기준
부속서 J: 중간절연 없이 사용하기 위한 절연 권선 전선
부속서 K: 안전 인터로크
부속서 M.6: 단락에 대한 보호수단
부속서 M.7: 납축(납 산성) 및 니켈 카드뮴 배터리의 폭발 위험
부속서 M.8: 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 R: 제한 단락회로 시험
부속서 S.3: 방화용 엔클로저의 밑면에 대한 난연성 시험
부속서 T.10: 유리 파쇄 시험
부속서 U: CRTs의 기계적 강도 및 내파 영향에 대한 보호
부속서 Y.5: 옥외용 엔클로저 내의 기기보호 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 50 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| ▶ 유/무선 통신기기 |
| ACMA Radiocommunications Standard:2014 |
Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2014
Compilation No.2 2020 |
300 MHz to 6 GHz |
소재지 |
| ANSI C63.10:2009 |
American National Standard for Testing Unlicensed Wireless Devices |
Up to 40 GHz |
소재지 |
| ANSI C63.10:2020 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices |
Up to 40 GHz |
소재지 |
| ANSI C63.26:2015 |
American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
Up to 40 GHz |
소재지 |
| ANSI C63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 ㎑ to 40 ㎓. |
Up to 40 GHz |
소재지 |
| ANSI C63.4:2014 Amd 1 2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 ㎑ to 40 ㎓. |
Up to 40 GHz |
소재지 |
| ANSI/TIA-603- D:2010 |
Land Mobile FM or PM - Communications Equipment - Measurement and Performance Standards |
Up to 40 GHz |
소재지 |
| ANSI/TIA-603- E:2016 |
Land Mobile FM or PM - Communications Equipment - Measurement and Performance Standards |
Up to 40 GHz |
소재지 |
| ARIB STD-T56:2025 |
SPECIFIC ABSORPTION RATE (SAR) ESTIMATION AND POWER DENSITY ESTIMATION FOR CELLULAR PHONE
[Exception]
Volume 2. Power Density Estimation for Cellular Phone |
SAR: 300 MHz to 6 GHz
APD: 6 GHz to 10 GHz |
소재지 |
| ARPANSA Radiation Protection Series S-1:2021 |
Standard for Limiting Exposure to Radiofrequency Fields - 100 kHz to 300 GHz |
300 MHz to 6 GHz |
소재지 |
| ARPANSA Radiation Protection Standard:2016 |
Maximum Exposure Levels to Radiofrequency Fields 3 kHz ~ 300 GHz |
300 MHz to 6 GHz |
소재지 |
| AS/NZS 2772.2:2016 |
Radiofrequency Fields - Principles and Methods of Measurement and Computation - 3 kHz to 300 GHz |
300 MHz to 6 GHz |
소재지 |
| AS/NZS 4268:2017 Amd 1:2021 |
Preview Radio equipment and systems - Short range devices - Limits and methods of measurement
[Exception]
EN 301 839-2
EN 302 537-2
ISO/IEC 18000-6
EN 302 264-1
EN 302 288-1
EN 302 537-2
EN 305 550-1
ETSI ETR 273-1-1 |
Up to 40 GHz |
소재지 |
| EN 300 220-1 V3.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 1: Technical characteristics and methods of measurement |
Up to 6 GHz |
소재지 |
| EN 300 220-2 V3.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
Up to 6 GHz |
소재지 |
| EN 300 220-2 V3.2.1:2018 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
Up to 6 GHz |
소재지 |
| EN 300 220-3-1 V2.1.1:2016 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
Up to 6 GHz |
소재지 |
| EN 300 220-3-2 V1.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
Up to 6 GHz |
소재지 |
| EN 300 220-4 V1.1.1:2017 |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
Up to 6 GHz |
소재지 |
| EN 300 328 V2.1.1:2016 |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 12.75 GHz |
소재지 |
| EN 300 328 V2.2.2:2019 |
Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 12.75 GHz |
소재지 |
| EN 300 330 V2.1.1:2017 |
Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 1 GHz |
소재지 |
| EN 300 440 V2.1.1:2017 |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 40 GHz |
소재지 |
| EN 300 440 V2.2.1:2018 |
Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 40 GHz |
소재지 |
| EN 301 357 V2.1.1:2017 |
Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 10 GHz |
소재지 |
| EN 301 511 V12.5.1:2017 |
Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 12.75 GHz |
소재지 |
| EN 301 893 V2.1.1:2017 |
5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 26.5 GHz |
소재지 |
| EN 301 893 V2.2.1:2024 |
5 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum |
Up to 26.5 GHz |
소재지 |
| EN 301 908-1 V15.1.1:2021-09 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements Release 15 |
Up to 12.75 GHz |
소재지 |
| EN 301 908-1 V15.2.1:2023 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements Release 15 |
Up to 12.75 GHz |
소재지 |
| EN 301 908-11 V11.1.2:2017 |
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters |
Up to 12.75 GHz |
소재지 |
| EN 301 908-12 V7.1.1:2016 |
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters |
Up to 26.5 GHz |
소재지 |
| EN 301 908-13 V13.2.1:2022 |
IIMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE) |
Up to 26.5 GHz |
소재지 |
| EN 301 908-14 V15.1.1:2021 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) Release 15 |
Up to 26.5 GHz |
소재지 |
| EN 301 908-14 V17.1.1:2025 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS) Release 15 |
Up to 26.5 GHz |
소재지 |
| EN 301 908-15 V15.1.1:2020 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
Up to 26.5 GHz |
소재지 |
| EN 301 908-18 V15.1.1:2021 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) Release 15 |
Up to 26.5 GHz |
소재지 |
| EN 301 908-18 V17.1.1:2025 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) Release 15 |
Up to 26.5 GHz |
소재지 |
| EN 301 908-20 V6.3.1:2016 |
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS) |
Up to 26.5 GHz |
소재지 |
| EN 301 908-3 V13.1.1:2019 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
Up to 26.5 GHz |
소재지 |
| EN 301 908-3 V15.1.1:2024 |
IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) |
Up to 26.5 GHz |
소재지 |
| EN 302 208 V3.3.1:2020 |
Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum |
Up to 12.75 GHz |
소재지 |
| EN 302 208 V3.4.1:2023 |
Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard for access to radio spectrum |
Up to 12.75 GHz |
소재지 |
| EN 302 291-1 V1.1.1:2005 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Close Range Inductive Data Communication equipment operating at 13.56 ㎒; Part 1: Technical characteristics and test methods |
Up to 1 GHz |
소재지 |
| EN 302 291-2 V1.1.1:2005 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Close Range Inductive Data Communication equipment operating at 13.56 ㎒; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
Up to 1 GHz |
소재지 |
| EN 302 340 V2.1.1:2016 |
Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU |
Up to 40 GHz |
소재지 |
| EN 302 502 V2.1.1:2017 |
Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 26.5 GHz |
소재지 |
| EN 303 340 V1.2.1:2020 |
Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 1 GHz |
소재지 |
| EN 303 345-1 V1.1.1:2019 |
Broadcast Sound Receivers; Part 1: Generic requirements and measuring methods |
Up to 6 GHz |
소재지 |
| EN 303 345-2 V1.2.1:2021 |
Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for access to radio spectrum |
Up to 6 GHz |
소재지 |
| EN 303 345-3 V1.1.1:2021 |
Broadcast Sound Receivers; Part 3: FM broadcast sound service; Harmonised Standard for access to radio spectrum |
Up to 6 GHz |
소재지 |
| EN 303 345-4 V1.1.1:2021 |
Broadcast Sound Receivers; Part 4: DAB broadcast sound service; Harmonised Standard for access to radio spectrum |
Up to 6 GHz |
소재지 |
| EN 303 345-5 V1.2.1:2021 |
Broadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for access to radio spectrum |
Up to 6 GHz |
소재지 |
| EN 303 372-2 V1.2.1:2021 |
Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 2: Indoor unit; Harmonised Standard for access to radio spectrum |
Up to 12.75 GHz |
소재지 |
| EN 303 413 V1.2.1 (2021-04) |
Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard for access to radio spectrum |
Up to 8.3 GHz |
소재지 |
| EN 303 417 V1.1.1 |
Wireless power transmission systems, using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
Up to 1 GHz |
소재지 |
| EN 303 687 V1.1.1:2023 |
6 GHz WAS/RLAN; Harmonised Standard for access to radio spectrum |
Up to 26.5 GHz |
소재지 |
| EN 305 550-1 V1.2.1:2014 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 1: Technical characteristics and test methods |
Up to 246 GHz |
소재지 |
| EN 305 550-2 V1.2.1:2014 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
Up to 246 GHz |
소재지 |
| EN 50360:2017 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
300 MHz to 6 GHz |
소재지 |
| EN 50360:2017+A1:2023 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
300 MHz to 6 GHz |
소재지 |
| EN 50385:2017 |
Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on the market |
110 MHz to 100 GHz |
소재지 |
| EN 50566:2017 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
30 MHz to 6 GHz |
소재지 |
| EN 50566:2017+A1:2023 |
Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body |
30 MHz to 6 GHz |
소재지 |
| EN 50663:2017 |
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz) |
Up to 300 GHz |
소재지 |
| EN 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 ㎒ to 6 ㎓) |
300 MHz to 6 GHz |
소재지 |
| EN 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz to 6 GHz |
소재지 |
| EN 62209-2:2010+A1:2019 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation, and procedures - Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz to 6 GHz |
소재지 |
| EN 62311:2008 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
Up to 300 GHz |
소재지 |
| EN 62311:2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
Up to 300 GHz |
소재지 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 MHz to 40 GHz |
소재지 |
| EN IEC 62311:2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz) |
Up to 300 GHz |
소재지 |
| EN IEC/IEEE 62209-1528:2021 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) |
300 MHz to 7.2 GHz |
소재지 |
| FCC Part 15 |
RADIO FREQUENCY DEVICES
[Exception]
Section 15.211 Tunnel radio systems.
Section 15.213 Cable locating equipment.
Subpart G
Subpart H |
Up to 300 GHz |
소재지 |
| FCC Part 2.1091 |
Radio frequency radiation exposure evaluation: mobile devices |
300 MHz to 6 GHz |
소재지 |
| FCC Part 2.1093 |
Radio frequency radiation exposure evaluation: portable devices |
300 MHz to 6 GHz |
소재지 |
| FCC Part 22 |
Public mobile Services
Subpart C
Section 22.355
Frequency Tolerance
Subpart H
Section 22.913
Effective radiated Power Limits
Section 22.917
Emission limitations for cellular Equipment |
Up to 40 GHz |
소재지 |
| FCC Part 24 |
Personal Communications Services
Subpart D
Section 24.131
Authorized bandwidth.
Section 24.132
Power and antenna height limits
Section 24.133
Emission limits
Section 24.135
Frequency stability
Subpart E
Section 24.232
Power and antenna height limits
Section 24.235
Frequency stability
Section 24.238
Emission limitations |
Up to 40 GHz |
소재지 |
| FCC Part 27 |
Miscellaneous Wireless Communication Services
Subpart C
Section 27.50
Power and antenna height limits
Section 27.51
Equipment authorization
Section 27.54
Frequency stability |
Up to 40 GHz |
소재지 |
| FCC Part 74 |
Experimental Radio, Auxiliary, Special Broadcast and Other Program Distributional Services
Subpart H,
Section 74.861(e),
For low power auxiliary stations operating in the bands allocated for TV broadcasting, the following technical requirements apply
Section 74.861(f),
Unusual transmitting antennas or antenna elevations shall not be used to deliberately extend the range of low power auxiliary stations beyond the limited areas defined in Section 74.831. |
Up to 40 GHz |
소재지 |
| FCC Part 90 |
Private Land Mobile Radio Services
Subpart I
Section 90.209
Bandwidth limitations
Section 90.210,
Emission masks
Section 90.213,
Frequency stability
Subpart S
Section 90.635,
Limitations on power and antenna height. |
Up to 40 GHz |
소재지 |
| IEC 62209-1:2016 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 ㎒ to 6 ㎓) |
300 MHz to 6 GHz |
소재지 |
| IEC 62209-2:2010 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
30 MHz to 6 GHz |
소재지 |
| IEC/IEEE 62209-1528:2020 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices - Human models, instrumentation and procedures (Frequency range of 4 MHz to 10 GHz) |
300 MHz to 7.2 GHz |
소재지 |
| IEEE Std 1528-2013 |
IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
300 MHz to 6 GHz |
소재지 |
| IEEE Std C95.1-2019 |
IEEE Standard for Safety Levels with Respect to Human Exposure to Electric, Magnetic, and Electromagnetic Fields, 0 Hz to 300 GHz |
9 kHz to 40 GHz |
소재지 |
| IEEE Std C95.3-2021 |
IEEE Recommended Practice for Measurements and Computations of Electric, Magnetic, and Electromagnetic Fields with Respect to Human Exposure to Such Fields, 0 Hz to 300 GHz |
300 MHz to 6 GHz |
소재지 |
| OET Bulletin 65 supplement C:2001 |
Evaluating Procedure with FCC Guidelines for Human Expose to Radio frequency Electromagnetic Field |
SAR: 300 MHz to 6 GHz
MPE: 9 kHz to 40 GHz |
소재지 |
| QCVN 117:2023/BTTTT |
National technical regulation on Land Mobile User Equipment - Radio Access
[Exception]
APPENDIX B (WCDMA network) |
Up to 26.5 GHz |
소재지 |
| QCVN 123:2021/BTTTT |
National technical regulation on Short Range Device (SRD) - Radio equipment to be used in the 40 GHz to 246 GHz
frequency range |
Up to 246 GHz |
소재지 |
| QCVN 54:2020/BTTTT |
National technical regulation on wideband data transmission equipment operating in the 2,4 GHz band |
Up to 12.75 GHz |
소재지 |
| QCVN 55:2023/BTTTT |
National technical regulation on Short Range Device (SRD)- Radio equipment to be used in the 9 kHz to 25 MHz
frequency range |
Up to 1 GHz |
소재지 |
| QCVN 63:2012/BTTTT |
National technical regulation on digital receiver used in digital terrestrial television broadcasting for DVB-T2 system |
Up to 1 GHz |
소재지 |
| QCVN 65:2021/BTTTT |
National technical regulation on radio access equipment operating in the 5 GHz band |
Up to 26.5 GHz |
소재지 |
| RSS-102 Issue 6:2023 |
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) |
Up to 40 GHz |
소재지 |
| RSS-119 Issue 12 Amendment 2:2025 |
Land Mobile and Fixed Equipment Operating in the Frequency Range 27.41-960 MHz |
Up to 10 GHz |
소재지 |
| RSS-131 Issue 4:2022 |
Zone enhancers |
Up to 18 GHz |
소재지 |
| RSS-132 Issue 4:2023 |
Cellular Telephone Systems Operating in the Bands 824-849 ㎒ and 869-894 ㎒ |
Up to 12.75 GHz |
소재지 |
| RSS-199 Issue 4:2023 |
Broadband Radio Service(BRS) Equipment Operating in the Band 2500 ㎒ - 2690 ㎒ |
Up to 26.5 GHz |
소재지 |
| RSS-210 Issue 11:2024 |
Licence-Exempt Radio Apparatus: Category I Equipment
[Exception]
8.4 Cordless telephones
A.2.2 Band 47.02-47.35 MHz (vehicle detector transmitters)
B.11 Bands 17.15 GHz and 94 GHz
Annex C Medical telemetry, wireless microphones, auditory assistance, goods tracking and law enforcement devices |
Up to 300 GHz |
소재지 |
| RSS-247 Issue 4:2025 |
Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices |
Up to 40 GHz |
소재지 |
| RSS-248 Issue 3:2024 |
Radio Local Area Network (RLAN) Devices Operating in the 5 925 - 7 125 MHz Band |
Up to 40 GHz |
소재지 |
| RSS-Gen Issue 6:2026 |
General Requirements for Compliance of Radio Apparatus |
Up to 40 GHz |
소재지 |
| ▶ 조명기기 |
| EN 60598-1:2021 |
Luminaires - Part 1: General requirements and tests
[Exception]
Cl.4.4.9: Single-capped ELV lamp
Cl.4.5: Starter holders
Cl.4.8: Switches
Cl.4.24: UV-radiation
Cl.5.2.2: Supply cord
Cl.5.2.14: Supply plug
Cl.9.2: Tests for ingress of dust, solid, objects and moisture
Annex P: Absorption requirements for the protective shield to be fitted to luminaires designed for metal halide lamps which emit a high level of UV radiation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60598-2-2:2012 |
Luminaires - Part 2-2: Particular requirements - Recessed luminaires and tests
[Exception]
Cl.2.14: Resistance to dust and moisture |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60598-2-3:2003+A1:2011 |
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
[Exception]
Cl.3.6.5: Flat glass cover shattering
Cl.3.13: Resistance to dust and moisture
Cl.3.6.3.1: Wind-force test |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60598-2-5:2015 |
Luminaires - Part 2-5: Particular requirements - Floodlights
[Exception]
Cl.3.6.8: Flat glass cover shattering
Cl.5.13 : Resistance to dust and moisture
Cl.5.6.5: Wind-force test |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60968:2015 |
Self-ballasted lamps for general lighting services - Safety requirements
[Exception]
Cl.14: UV radiation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 61347-1:2015 |
Lamp controlgear - Part 1: General and safety requirements
[Exception]
Cl.14.7: Fault conditions for high-power a.c. supply |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 61347-1:2015+A1:2021 |
Lamp controlgear - Part 1: General and safety requirements
[Exception]
Cl.14.7: Fault conditions for high-power a.c. supply |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 61347-2-11:2001+A1:2019 |
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 61347-2-13:2014+A1:2017 |
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62031:2008+A1:2013+A2:2015 |
LED modules for general lighting - Safety specifications |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62384:2006+A1:2009 |
DC or AC supplied electronic control gear for LED modules - Performance requirements
[Exception]
Annex A.3: Measurement of impedance at audio-frequencies |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62493:2015+A1:2022 |
Assessment of lighting equipment related to human exposure to electromagnetic fields |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62560:2012 |
Self-ballasted LED - lamps for general lighting services by voltage ] 50 V - Safety specifications
[Exception]
Cl.5.2: Eye protection |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 62560:2012+A1:2015+A11:2019 |
Self-ballasted LED - lamps for general lighting services by voltage 50 V - Safety specifications
[Exception]
Cl.5.2: Eye protection
Cl.18: Ingress protection |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60598-2-1:2021+A11:2022 |
Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires and tests
[Exception]
Cl.1.13: Resistance to dust and moisture |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 62031:2020+A11:2021 |
LED modules for general lighting - Safety specifications |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 62384:2020 |
DC or AC supplied electronic control gear for LED modules - Performance requirements
[Exception]
Annex A.3: Measurement of impedance at audio-frequencies |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60598-1:2014+A1:2017 |
Luminaires - Part 1: General requirements and tests
[Exception]
Cl.4.4.9: Single-capped ELV lamp
Cl.4.5: Starter holders
Cl.4.8: Switches
Cl.4.24: UV-radiation,
Cl.5.2.2: Supply cord
Cl.5.2.14: Supply plug
Cl.9.2: Tests for ingress of dust, solid, objects and moisture
Annex P: Absorption requirements for the protective shield to be fitted to luminaires designed for metal halide lamps which emit a high level of UV radiation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60598-1:2020 |
Luminaires - Part 1: General requirements and tests
[Exception]
Cl.4.4.9: Single-capped ELV lamp
Cl.4.5: Starter holders
Cl.4.8: Switches
Cl.4.24: UV-radiation,
Cl.5.2.2: Supply cord
Cl.5.2.14: Supply plug
Cl.9.2: Tests for ingress of dust, solid, objects and moisture
Annex P: Absorption requirements for the protective shield to be fitted to luminaires designed for metal halide lamps which emit a high level of UV radiation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60598-2-1:2020 |
Luminaires - Part 2: Particular requirements- Section One: Fixed general purpose luminaires
[Exception]
Cl.1.13: Resistance to dust and moisture |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60598-2-2:2023 |
Luminaires - Part 2: Particular requirements - Recessed luminaires and tests
[Exception]
Cl.2.14: Resistance to dust and moisture
Annex B: Recessed luminaires thermal test methods |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60598-2-3:2002+A1:2011 |
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
[Exception]
Cl.3.6.5: Flat glass cover shattering
Cl.3.13 : Resistance to dust and moisture
Cl.3.6.3.1: Wind-force test |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60598-2-5:2015 |
Luminaires - Part 2-5: Particular requirements - Floodlights
[Exception]
Cl.3.6.8: Flat glass cover shattering
Cl.5.13 : Resistance to dust and moisture
Cl.5.6.5: Wind-force test |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60968:2015 |
Self-ballasted lamps for general lighting services-Safety requirements
[Exception]
Cl.14: UV radiation |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 61347-1:2015+A1:2017 |
Lamp controlgear - Part 1: General and safety requirements
[Exception]
Cl.14.7 Fault conditions for high-power a.c. supply |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 61347-2-11:2001+A1:2017 |
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 61347-2-13:2014 |
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 61347-2-13:2014+A1:2016 |
Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62031:2018 |
LED modules for general lighting - Safety specifications |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62384:2020 |
DC or AC supplied electronic control gear for LED modules - Performance requirements
[Exception]
Annex A.3: Measurement of impedance at audio-frequencies |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62493:2015+A1:2022 |
Assessment of lighting equipment related to human exposure to electromagnetic fields |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 62560:2011+A1:2015 |
Self-ballasted LED - lamps for general lighting services by voltage 50 V - Safety specifications
[Exception]
Cl.5.2: Eye protection
Cl.18: Ingress protection |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60598-1:2025-10-27 |
등기구 - 제1부 : 일반요구사항 및 시험
[제외항목]
4.4.9절: 단일 캡 ELV 램프
4.5절: 시동시 홀더
4.8절: 스위치
4.24절: UV 방사
5.2.2절: 코드
5.2.14절: 플러그
9.2절 : 먼지, 경질 물체, 습기의 침입에 대한 시험
부속서 P: 고수준의 자외선을 방출하는 금속 할로겐화물 램프용으로 설계된 등기구에 부착하는 보호 차폐물에 대한 흡광 요구사항 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60598-2-1:2022-02-16 |
등기구 - 제2-1부 : 고정형 형광등기구 개별요구사항
[제외항목]
1.13절 : 내진성 및 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60598-2-2:2022-02-16 |
등기구 - 제2-2부 : 매입형 조명기구에 대한 개별요구사항
[제외항목]
2.14절 : 내진성 및 내습성 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60598-2-5:2022-02-16 |
등기구 - 제2-5부 : 투광조명기구 - 개별요구사항
[제외항목]
3.6.8절: 유리 덮개의 충격
5.13절 : 내진성 및 내습성
5.6.5절: 풍속에 대한 정부하 시험 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 60968:2022-02-16 |
안정기 내장형 램프 - 안전요구사항 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 61347-1:2022-02-16 |
램프 구동장치 - 제1부 : 일반 및 안전 요구사항 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 61347-2-11:2015-09-23 |
램프 구동장치 - 제2-13부 : LED 모듈용 DC/AC 전원 전자 구동장치에 대한 개별 요구사항 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 61347-2-13:2022-02-16 |
램프 구동장치 - 제2-13부 : LED 모듈용 DC/AC 전원 전자 구동장치에 대한 개별 요구사항 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 62031:2025-10-27 |
일반 조명용 LED 모듈 - 안전 요구사항 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KC 62384:2014-09-03 |
LED 모듈용 DC/AC 전원 구동장치 - 성능요구사항
[제외항목]
부속서 A.3: 가청 주파수에서 임피던스의 측정 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| KS C 7655:2021 |
LED 모듈 전원공급용 컨버터[제외항목]
7.2: 전류 고조파 함유율 |
Input Voltage: Max. 600 V
Input Current: Max. 20 A
Leakage Current: Max. 10 mA
Temperature: Max. 200 °C
Earth Continuity: 12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C
Humidity: Max. 93 % R.H. |
부속시설-1 |
| ▶ 의료기기 |
| ANSI/AAMI ES 60601-1:2005+A1:2012 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (Adopted IEC 60601-1:2005, third edition, 2005-12, including amendment 1: 2012, with Canadian deviations)
[Exception]
9.5.2. Cathode ray tubes
11.2.2 ME equipment and ME system used in conjunction with Oxygen rich environments
11.2.3 Single Fault conditions related to Oxygen rich environments in conjunction with ME Equipment and ME systems
11.4 ME Equipment and ME Systems intended for use with flammable anaesthetics
11.6.5 Ingress of water or particular matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
13.2.11 Failures of components in ME equipment used in conjunction with Oxygen rich environment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| CAN/CSA-C22.2 No.60601-1:14 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (Adopted IEC 60601-1:2005, third edition, 2005-12, including amendment 1: 2012, with Canadian deviations)
[Exception]
9.5.2. Cathode ray tubes
11.2.2 ME equipment and ME system used in conjunction with Oxygen rich environments
11.2.3 Single Fault conditions related to Oxygen rich environments in conjunction with ME Equipment and ME systems
11.4 ME Equipment and ME Systems intended for use with flammable anaesthetics
11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
13.2.11 Failures of components in ME equipment used in conjunction with Oxygen rich environment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-1:2006+A1:2013 |
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
9.5.2. Cathode ray tubes
11.2.2 ME equipment and ME system used in conjunction with Oxygen rich environments
11.2.3 Single Fault conditions related to Oxygen rich environments in conjunction with ME Equipment and ME systems
11.4 ME Equipment and ME Systems intended for use with flammable anaesthetics
11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
13.2.11 Failures of components in ME equipment used in conjunction with Oxygen rich environment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-1-10:2008 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controls
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity 12 V, 60 A Electric strength: 10 kV, 100 mA Insulation Resistance: Max. 4.5 GΩ Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-1-11:2015 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
[Exception]
8.3.1 Ingress of water or particular matter into ME EQUIPMENT
8.3.2 Ingress of water or particulate matter into ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-1-3:2008+A1:2013 |
Medical electrical equipment - Part 1-3:General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| EN 60601-1-3:2008+A1:2013+A11:2016 |
Medical electrical equipment - Part 1-3:General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| EN 60601-1-6:2010+A1:2015 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
N/A (No testing) |
부속시설-1 |
| EN 60601-1-8:2007+A1:2013 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, test and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-1-8:2007+A1:2013+A11:2017 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, test and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-10:2012+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-10:2015 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-18:2015 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-25:2015 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardographs
[Exception]
201.7.2.101 Acoustic output
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-27:2014 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-34:2014 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
[Exception]
201.7.2.101 Acoustic output
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-37:2008+A11:2011+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
[Exception]
201.7.2.101 Acoustic output
201.11 Protection against excessive temperatures and other hazards
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS (IPX1)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-4:2010+A1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity 12 V, 60 A Electric strength: 10 kV, 100 mA Insulation Resistance: Max. 4.5 GΩ Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-4:2011 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity 12 V, 60 A Electric strength: 10 kV, 100 mA Insulation Resistance: Max. 4.5 GΩ Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-44:2009+A1:2012 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-44:2009+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN 60601-2-45:2011 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
Measuring tube voltage: (35 ~ 160) kVp Measuring current: (0.2 ~ 2 000) mA Measuring current time: (0.05 ~ 9 999) mAs Measuring radiation dosage: 10 nGy ~ 9 999 Gy |
부속시설-1 |
| EN 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
Measuring tube voltage: (35 ~ 160) kVp Measuring current: (0.2 ~ 2 000) mA Measuring current time: (0.05 ~ 9 999) mAs Measuring radiation dosage: 10 nGy ~ 9 999 Gy |
부속시설-1 |
| EN 60601-2-54:2009+A1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| EN 60601-2-63:2015 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| EN 60601-2-65:2013 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| EN 62366:2008+A1:2015 |
Medical devices - Application of usability engineering to medical devices |
N/A (No testing) |
부속시설-1 |
| EN 80601-2-30:2010+A1:2015 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
[Exception]
201.15.3.5.101 Shock and vibration for other than transport
a) Shock test in accordance with IEC 60068-2-27:2008 using the conditions of test type 1 or 2
201.15.3.5.102 Shock and vibration for transport
a) Shock test in accordance with IEC 60068-2-27:2008 using the conditions of test type 1 or 2 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
[Exception]
201.12 Accuracy of controls and instruments and protection against hazardous outputs
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60601-2-22:2020/A11:2026 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
[Exception]
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Measuring time: 1/100 s Measuring resistance: 100 kΩ |
부속시설-1 |
| EN IEC 60601-2-40:2025 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment
[Exception]
50 Accuracy of operating data
51 Protection against hazardous output |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 60601-2-46:2024 |
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 80601-2-49:2019 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| EN IEC 80601-2-60:2020 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment [Exception] 201.10.4 Lasers and light-emitting diodes (LED) |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1:1988+A1:1991+A2:1995 |
Medical electrical equipment - Part 1 : General requirement for safety
[Exception]
29. X-Radiation
37. Locations and basic requirements
39. Common requirements for Category AP and Category APG Equipment
40. Requirements and test for Category AP Equipment, parts and components thereof
41. Requirements and tests for Category APG equipments, parts and components thereof
44.6 Ingress of liquids from IPX 1 to IPX 6
48. Biocompatibility |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current:
Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA Insulation Resistance:
Max. 4.5 GΩ Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1:2005 |
Medical Electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
9.5.2. Cathode ray tubes
11.2.2 ME equipment and ME system used in conjunction with Oxygen rich environments
11.2.3 Single Fault conditions related to Oxygen rich environments in conjunction with ME Equipment and ME systems
11.4 ME Equipment and ME Systems intended for use with flammable anaesthetics
11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
13.2.11 Failures of components in ME equipment used in conjunction with Oxygen rich environment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1:2005+A1:2012 |
Medical Electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
9.5.2. Cathode ray tubes
11.2.2 ME equipment and ME system used in conjunction with Oxygen rich environments
11.2.3 Single Fault conditions related to Oxygen rich environments in conjunction with ME Equipment and ME systems
11.4 ME Equipment and ME Systems intended for use with flammable anaesthetics
11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
13.2.11 Failures of components in ME equipment used in conjunction with Oxygen rich environment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1:2005+A2:2020 |
Medical Electrical equipment - Part 1: General requirements for basic safety and essential performance
[Exception]
9.5.2. Cathode ray tubes
11.2.2 ME equipment and ME system used in conjunction with Oxygen rich environments
11.2.3 Single Fault conditions related to Oxygen rich environments in conjunction with ME Equipment and ME systems
11.4 ME Equipment and ME Systems intended for use with flammable anaesthetics
11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
13.2.11 Failures of components in ME equipment used in conjunction with Oxygen rich environment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1-10:2007 |
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controls |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1-11:2015 |
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
[Exception]
8.3.1 Ingress of water or particulate matter into ME EQUIPMENT
8.3.2 Ingress of water or particulate matter into ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1-3:2008+A1:2013 |
Medical electrical equipment - Part 1-3:General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-1-6:2010+A1:2013 |
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
N/A (No testing) |
부속시설-1 |
| IEC 60601-1-8:2006 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-1-8:2006+A1:2012 |
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, test and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-10:1987+A1:2001 |
Medical electrical equipment - Part 2: Particular requirements for the safety of nerve and muscle stimulators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-10:2012 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-18:2009 |
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-2:2009 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-2:2009+CORR.1:2014 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-22:2007 |
Medical electrical equipment - Part 2-22: Particular requirements for the basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
[Exception]
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-22:2007+A1:2012 |
Medical electrical equipment - Part 2-22: Particular requirements for the basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
[Exception]
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-24:1998 |
Medical electrical equipment - Part 2-24: Particular requirement for the safety of infusion pumps and controllers
[Exception]
50 Accuracy of operating data
51 Protection against hazardous output |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-24:2015 |
Medical electrical equipment - Part 2-24: Particular requirement for the safety of infusion pumps and controllers
[Exception]
50 Accuracy of operating data
51 Protection against hazardous output |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-25:1993+A1:1999 |
Medical electrical equipment - Part 2: Particular requirements for the safety of electrocardiographs
[Exception]
51.102 Recovery time of the electrocardiograph from electrode polarization after defibrillation |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-25:2011 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
[Exception]
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-26:2012 |
Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-27:2005 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-27:2011 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-28:2010 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-28:2017 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-34:2011 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-37:2007+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
[Exception]
201.7.2.101 Acoustic output
201.11 Protection against excessive temperatures and other hazards
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS (IPX1)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-4:2010 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity 12 V, 60 A Electric strength: 10 kV, 100 mA Insulation Resistance: Max. 4.5 GΩ Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-40:1998 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment
[Exception]
50 Accuracy of operating data
51 Protection against hazardous output |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-40:2016 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment
[Exception]
50 Accuracy of operating data
51 Protection against hazardous output |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-43:2010/Amd1:2017 |
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography [Exception] 201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-45:2011 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-45:2011+A1:2015 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-46:2010 |
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-49:2011 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-5:2009 |
Medical electrical equipment - Part 2-5 Particular requirements for the basic safety and essential performance of Ultrasonic physiotherapy equipment.
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-54:2009+A1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-54:2009+A1:2015+A2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-6:2012 |
Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 60601-2-63:2012+A1:2017 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 60601-2-65:2012+A1:2017 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
Measuring distance: 1 500 mm Measuring tube voltage: (23 ~ 145) kVp Measuring luminance: 1 500 lx Measuring radiation dosage: (186 ~ 8 541) μGy Measuring mass radiation dosage: (7 ~ 26.8) mGy/h |
부속시설-1 |
| IEC 62366:2007+A1:2014 |
Medical devices - Application of usability engineering to medical devices |
N/A (No testing) |
부속시설-1 |
| IEC 80601-2-30:2009 |
Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment
[Exception]
201.15.3.5.101 Shock and vibration (robustness)
211.8.3.1 Ingress of water or particulate matter into ME EQUIPMENT |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 80601-2-30:2009+A1:2013 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
[Exception]
201.15.3.5.101 Shock and vibration for other than transport
a) Shock test in accordance with IEC 60068-2-27:2008 using the conditions of test type 1 or 2
201.15.3.5.102 Shock and vibration for transport
a) Shock test in accordance with IEC 60068-2-27:2008 using the conditions of test type 1 or 2
211.8.3.1 Ingress of water or particulate matter into ME EQUIPMENT |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
[Exception]
201.11.6.5 Ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS from IPX 1 to IPX 6 |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment [Exception] 201.10.4 Lasers and light-emitting diodes (LED) |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| ISO 80601-2-56:2009 |
Medical electrical equipment -Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| ISO 80601-2-56:2017 |
Medical electrical equipment -Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| ISO 80601-2-56:2017+AMD1:2018 |
Medical electrical equipment -Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| ISO 80601-2-61:2011 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment [Exception] 201.11.6.5.101 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT or ME SYSTEM 201.15.3.5.101.1 Shock and Vibration 201.15.3.5.101.2 Shock and vibration for professional transport |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| ISO 80601-2-61:2017 |
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment [Exception] 201.11.6.5.101 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT or ME SYSTEM 201.15.3.5.101.1 Shock and Vibration 201.15.3.5.101.2 Shock and vibration for professional transport |
Input Voltage: Max. 600 V Input Current: Max. 20 A Leakage Current: Max. 10 mA Temperature: Max. 200 °C Earth Continuity:
12 V, 60 A
Electric strength: 10 kV, 100 mA
Insulation Resistance: Max. 4.5 GΩ
Temperature: (-40 ∼ 100) °C Humidity: Max. 93 % R.H. |
부속시설-1 |
| ▶ 전자기적합성 |
| 36-00-808/-N |
Renault - Resistance to electrical Disturbance and Electromagnetic compatibility Instructions concerning electrical, electronic and pyrotechnic equipment
[Exception]
EQ/IC 04:Resistance to power supply micro-interruptions
EQ/IC 09: Immunity to ignition high volt
EQ/IC 11: Resistance to impulsive transient
EQ/IR 01: Immunity to radiated field (semi-anechoic or anechoic chamber)
EQ/IR 05: Resistance to handy transmitters
EQ/MC 01 : Measurement of conducted transient emission 제외 |
CE : 100 kHz ~ 110 MHz
RE : 100 kHz ~ 2.5 GHz
ESD : ± 30 kV
RI : 20 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5
BCI : 10 kHz ∼ 400 MHz |
소재지,부속시설-1 |
| ABS Rules for Building and Classing Marine Vessels:2026 |
Rules for Building and Classing Marine Vessels
/ Part 4 Vessel Systems and Machinery Chapter 9 Automation Section 9 Equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| ANSI C63.4:2009 |
American National Standard for Methods of
Measurement of Radio-Noise Emissions from
Low-Voltage Electrical and Electronic Equipment
in the Range of 9 kHz to 40 GHz
[Exception]
Annex F Test Procedure for emission testing in TEM waveguides (30 MHz to 1 GHz) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| ANSI C63.4:2014 |
American National Standard for Methods of
Measurement of Radio-Noise Emissions from
Low-Voltage Electrical and Electronic Equipment
in the Range of 9 kHz to 40 GHz
[Exception]
Annex F Test Procedure for emission testing in TEM waveguides (30 MHz to 1 GHz) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 40 GHz |
소재지,부속시설-1 |
| ANSI C63.4a:2017 |
American National Standard for Methods of
Measurement of Radio-Noise Emissions from
Low-Voltage Electrical and Electronic Equipment
in the Range of 9 kHz to 40 GHz
[Exception]
Annex F Test Procedure for emission testing in TEM waveguides (30 MHz to 1 GHz) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 40 GHz |
소재지,부속시설-1 |
| ANSI/AAMI/IEC 60601-1-2:2014/A1:2021 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment
- Radio
- frequency disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| AS CISPR 11:2017 AMD 1:2020 |
Industrial, scientific and medical equipment
- Radio
- frequency disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| AS/NZS CISPR 11:2024 |
Industrial, scientific and medical equipment
- Radio
- frequency disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| AS CISPR 14.1:2018 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| AS CISPR 15:2017 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- Radio
- frequency disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz |
소재지 |
| AS/NZS 61000.6.3:2012 |
Electromagnetic compatibility (EMC)
- Part 6.3 : Generic standards
- Emission standards for residential, commercial and light-industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| AS/NZS 61000.6.3:2021 |
Electromagnetic compatibility (EMC)
- Part 6.3 : Generic standards
- Emission standards for residential, commercial and light-industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| AS/NZS 61000.6.4:2012 |
Electromagnetic compatibility (EMC)
- Part 6.4 : Generic standards
- Emission standards for industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| AS/NZS CISPR 13:2012 |
Sound and television broadcast receivers and associated equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| AS/NZS CISPR 14.1:2021 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| AS/NZS CISPR 22:2009 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| AS/NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 9 kHz ~ 18 GHz
CE: 9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| AS/NZS CISPR 32:2015 AMD 1:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| BV:2026 |
Rules for the Classification of Steel Ships Part C (Machinery, Electricity, Automation and Fire Protection) Chapter 3 (Automation) Section 6 (Testing)
[Exception]
Cl. No.4c : Pneumatic and hydraulic power supply variations
Cl. No.12 : Salt mist |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| CISPR 11:2015+A1:2016 |
Industrial scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| CISPR 11:2015+A1:2016+A2:2019 |
Industrial scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| CISPR 13:2009 |
Sound and television broadcast receivers and associated equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| CISPR 14-1:2011 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| CISPR 14-1:2016 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 1 GHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| CISPR 14-1:2020 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| CISPR 14-2:2015 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 2: Immunity
- Product family standard |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| CISPR 14-2:2020 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 2: Immunity
- Product family standard |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 1 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| CISPR 15:2013+A1:2015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz |
소재지 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz |
소재지 |
| CISPR 15:2018/AMD1:2024 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz |
소재지 |
| CISPR 22:2008 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| CISPR 24:2010 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| CISPR 24:2015 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| CISPR 25:2016 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
CE(Power Line) : 150 kHz ~ 108 MHz
CE(Signal Line) : 150 kHz ~ 245 MHz
RE : 0.15 kHz ~ 2.5 GHz |
소재지,부속시설-1 |
| CISPR 25:2021 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
CE(Power Line) : 150 kHz ~ 108 MHz
CE(Signal Line) : 150 kHz ~ 245 MHz
RE : 0.15 kHz ~ 6 GHz |
소재지,부속시설-1 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| CISPR 32:2015/COR1:2016 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| CISPR 32:2015+A1:2019 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz |
소재지,부속시설-1 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements
[Exception]
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21: 2011
4.2.7 Broadband impulse conducted disturbances |
ESD: ±8 kV
RS: 80 MHz ~ 5 GHz, 3 V/m
EFT: ±1 kV
SURGE: ±2 kV
CS: 150 kHz ~ 80 MHz, 3 V
M/F: 50/60 Hz, 1 A/m
V-DIP: (0 ~ 100) % |
소재지,부속시설-1 |
| DNVGL-CG-0339:2021 |
Environmental test specification for electrical, electronic and programmable equipment and systems
[Exception]
5 : Power supply variation tests(Table 4 Pneumatic/Hydraulic power supply) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| E10:2024 |
Test Specification for Type Approval (Rev.8 Feb 2021)
Type testing condition for equipment covered by E10.1 No. 13 ~ No. 20
[Exception]
No.4 : Power supply variations b) pneumatic and hydraulic
No.12 : Salt mist |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0∼100) % |
소재지,부속시설-1 |
| ECER-10.06:2019 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility
[Exception]
3.1 Cl. Approval of a vehicle type |
RE : 30 MHz ∼ 1 GHz
ALSE : 80 MHz ∼ 2 GHz
BCI : 20 MHz ∼ 400 MHz
CTI : Pulse 1, 2a, 2b, 3a, 3b, 4
CTE : 12 V, 24 V System
CE(AC, DC Power) : (0.15 ∼ 30) MHz
CE(TEL) : (0.15 ∼ 30) MHz
Harmonic Current Emission: 16 A
Voltage Fluctuation and Flicker: 16 A
Electrical Fast Transients/ Burst: ±2 kV
Surge Transient: ±2 kV |
소재지,부속시설-1 |
| ECER-116:2008 |
UNIFORM TECHINICAL PRESCRIPTIONS CONCERNIGN THE PROTECTION OF MOTOR VEHICLES AGAINST UNAUTHORIZED USE |
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5a, 5b
Electromagnetic field : 20 ~ 1000 MHz |
소재지,부속시설-1 |
| ECER-97.01:Amendment 2:2011 |
Uniform provisions concerning the approval for vehicle alarm systems and of motor vehicles with regard to their alarm systems |
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5 |
소재지,부속시설-1 |
| EMC-CS-2009.1 |
(Ford) Electromagnetic Compatibility Specification For Electrical/Electronic Components and Subsystems |
RE 310 : (0.15 ~ 1 583) MHz
CE 420 : 0.15～108 MHz
CE 410
CI 270
CI 280 : ±25 kV |
소재지,부속시설-1 |
| EN 12015:2014 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 12016:2013 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
ESD : ± 30 kV
RS : 2 MHz ∼ 18 GHz
EFT : ± 4 kV
SURGE : ± 15 kV
CS : 150 kHz ∼ 230 MHz
M/F : 120 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-1 V2.1.1:2017 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-1 V2.2.3:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential
requirements of article 6 of Directive 2014/30/EU |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 1 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-17 V3.1.1:2017 |
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems;
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-17 V3.2.4:2020 |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility
Part 17: Specific conditions for Broadband Data Transmission Systems;
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-17 V3.3.1:2024 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-19 V2.1.1:2019 |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communication |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-19 V2.2.1:2022 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the RNSS band providing positioning, navigation, and timing data; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| EN 301 489-2 V2.1.1:2019 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 2: Specific conditions for radio paging equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-3 V2.1.1:2019 |
Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-3 V2.3.2:2023 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD)
operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| EN 301 489-34 V2.1.1:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones; Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-4 V3.3.1:2021 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 4: Specific conditions for fixed radio links and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| EN 301 489-5 V2.2.1:2019 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 5: Specific conditions for Private land Mobile Radio (PMR) and ancillary equipment (speech and non-speech) and Terrestrial Trunked Radio (TETRA); Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-50 V2.2.1 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment;
Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-50 V2.3.1:2021 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| EN 301 489-50 V2.4.1:2025 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| EN 301 489-51 V2.1.1 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 51: Specific conditions for Automotive, Ground based Vehicles and Surveillance Radar Devices using 24,05 GHz to 24,25 GHz, 24,05 GHz to 24,5 GHz, 76 GHz to 77 GHz and 77 GHz to 81 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-52 V1.3.1:2024 |
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 301 489-9 V2.1.1:2019 |
Electromagnetic Compatibility (EMC) standard for radio equipment and services;
Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless
audio and in-ear monitoring device |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50121-1:2017 |
Railway applications - Electromagnetic compatibility - Part 1: General |
General |
소재지,부속시설-1 |
| EN 50121-3-1:2017 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 50121-3-1:2017+A1:2019 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 50121-3-2:2015 |
Railway Application - Electromagnetic Compatibility - Part 3-2:Rolling Stock - Apparatus |
CE : 50 Hz ~ 2 kHz, 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50121-3-2:2016 |
Railway Application - Electromagnetic Compatibility - Part 3-2:Rolling Stock - Apparatus |
CE : 50 Hz ~ 2 kHz, 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50121-3-2:2016+A1:2019 |
Railway Application - Electromagnetic Compatibility - Part 3-2:Rolling Stock - Apparatus |
CE : 50 Hz ~ 2 kHz, 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50121-4:2016 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50121-4:2016+A1:2019 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50121-5:2017 |
Railway applications Electromagnetic compatibility Fixed power supply installations |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 300 A/m
V-DIP : (0 ∼ 100) %
DAMPED 2.5 kV |
소재지,부속시설-1 |
| EN 50121-5:2017+A1:2019 |
Railway applications Electromagnetic compatibility Fixed power supply installations |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 300 A/m
V-DIP : (0 ∼ 100) %
DAMPED 2.5 Kev |
소재지,부속시설-1 |
| EN 50130-4:2011+A1:2014 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50155:2017 |
Railway applications Electronic equipment used on rolling stock
[Exception]
13.4.10 Salt mist test
13.4.11 Vibration and shock test(1 000 m/s²)
13.4.13 Equipment stress screening test,
13.4.14 Rapid Temperature variation test |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50155:2021 |
Railway applications Electronic equipment used on rolling stock
[Exception]
13.4.10 Salt mist test
13.4.11 Vibration and shock test(1 000 m/s²)
13.4.13 Equipment stress screening test,
13.4.14 Rapid Temperature variation test |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50270:2015 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50270:2015/AC:2016-08 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 50498:2010 |
Electromagnetic compatibility (EMC) - Product family standard:
for aftermarket electronic equipment in vehicles |
30 MHz ~ 1 GHz |
소재지,부속시설-1 |
| EN 55011:2016 +A2:2021 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE : 150 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 55011:2016+A1:2017 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 55011:2016+A11:2020 |
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 55013:2013+A1:2016 |
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| EN 55014-1:2017 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 1 GHz |
소재지,부속시설-1 |
| EN 55014-1:2017/A11:2020 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 1 GHz |
소재지,부속시설-1 |
| EN 55014-2:2015 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 2: Immunity
- Product family standard |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 55015:2013+A1:2015 |
Limits And Methods Of Measurement Of Radio Disturbance Characteristics Of Electrical Lighting And Similar Equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz |
소재지 |
| EN 55015:2019 |
Limits And Methods Of Measurement Of Radio Disturbance Characteristics Of Electrical Lighting And Similar Equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 1 GHz |
소재지 |
| EN 55022:2010+AC:2011 |
Information technology equipment
- Radio disturbance characteristics
- Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| EN 55032:2015+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 9 kHz ~ 18 GHz
CE: 9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| EN 55032:2015+AC:2016 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 9 kHz ~ 18 GHz
CE: 9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements
[Exception]
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21: 2011
4.2.7 Broadband impulse conducted disturbances |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 55035:2017+A11:2020 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements
[Exception]
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21: 2011
4.2.7 Broadband impulse conducted disturbances |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 55103-1:2009+A1:2012 |
Electromagnetic compatibility
- Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| EN 55103-2:2009 |
Electromagnetic Compatibility - Product Family Standard For Audio, Video, Audio-visual And Entertainment Lighting Control Apparatus For Professional Use - Part 2: Immunity |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60255-22-3:2008 |
Measuring relays and protection equipment. Electrical disturbance tests. Radiated electromagnetic field immunity |
RS: 80 MHz ~ 3 GHz |
소재지,부속시설-1 |
| EN 60601-1-2:2007+AC:2010 |
Medical electrical equipment
- Part 1-2: General requirements for safety
- Collateral standard: Electromagnetic compatibility
- Requirements and tests |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60601-1-2:2015 |
Medical electrical equipment
- Part 1-2: General requirements for safety
- Collateral standard: Electromagnetic compatibility
- Requirements and tests |
CE : 150 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 2 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60601-1-2:2015/A1:2021 |
Medical electrical equipment
- Part 1-2: General requirements for safety
- Collateral standard: Electromagnetic compatibility
- Requirements and tests |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 30 kHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60601-2-3:2015/A2:2024 |
Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| EN 60601-2-37:2008+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment.
[Exception]
201.7.2.101 Acoustic output
201.11 Protection against excessive temperatures and other hazards
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60601-2-37:2008+A11:2011 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment.
[Exception]
201.7.2.101 Acoustic output
201.11 Protection against excessive temperatures and other hazards
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60601-2-37:2008+A11:2011+A1:2015 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment.
[Exception]
201.7.2.101 Acoustic output
201.11 Protection against excessive temperatures and other hazards
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 60601-2-6:2015+A2:2024 |
Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and system - General requirements - Methods of testing and required test results
Cl.7.1 : Extreme power supply
Cl.7.2 : Excessive conditions
Cl.7.3 : Power supply short-term variation
Cl.7.4 : Power supply failure
Cl.8.1 : General
Cl.8.2 : Dry heat
Cl.8.3 : Damp heat
Cl.8.4 : Low temperature
Cl.8.7 : Vibration
Cl.8.8 : Rain and spray (exposed equipment)
Cl.12.1 : Protection against accidental access to dangerous voltages |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61000-3-11:2000 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
≤ 75 A |
소재지,부속시설-1 |
| EN 61000-3-12:2011 |
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
≤ 75 A |
소재지,부속시설-1 |
| EN 61000-3-2:2014 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| EN 61000-3-3:2013 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with
rated current ≤ 16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| EN 61000-3-3:2013/A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| EN 61000-3-3:2013+A1:2019 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with
rated current ≤ 16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| EN 61000-4-10:2017 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques-damped oscillatory magnetic field immunity test |
(10 ~ 100) A/m(peak) |
소재지,부속시설-1 |
| EN 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| EN 61000-4-12:2017 |
Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques-Ring wave immunity test |
(250 ~ 6,000) V |
소재지,부속시설-1 |
| EN 61000-4-14:1999+A1:2004+A2:2009 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
3상 500 V, 160 A |
소재지,부속시설-1 |
| EN 61000-4-16:2016 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
0 Hz ∼ 150 kHz |
소재지,부속시설-1 |
| EN 61000-4-17:1999+A1:2002+A2:2009 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test |
DC 400 V |
소재지,부속시설-1 |
| EN 61000-4-18:2007+A1:2010 |
Testing and measurement techniques- Damped oscillatory wave immunity test |
(250 ~ 2,500) V |
소재지,부속시설-1 |
| EN 61000-4-2:2009 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
8 kV |
소재지,부속시설-1 |
| EN 61000-4-27:2000+A1:2009 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase |
3상 500 V, 63 A |
소재지,부속시설-1 |
| EN 61000-4-28:2000+A2:2009 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
3상 500 V, 63 A |
소재지,부속시설-1 |
| EN 61000-4-29:2001 |
Electromagnetic compatibility(EMC)-Part4-29:Testing and measurement techniques-Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
DC 500 V |
소재지,부속시설-1 |
| EN 61000-4-3:2006+A1:2008+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz ∼ 6 GHz |
소재지,부속시설-1 |
| EN 61000-4-34:2007+A1:2009 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
3상, (0 ∼ 500) V |
소재지,부속시설-1 |
| EN 61000-4-4:2012 |
Electromagnetic compatibility (EMC)
- Part 4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity test |
(0.2 ~ 4) kV |
소재지,부속시설-1 |
| EN 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
(0.5 ~ 15) kV |
소재지,부속시설-1 |
| EN 61000-4-6:2014+AC:2015 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ~ 1 GHz |
소재지,부속시설-1 |
| EN 61000-4-8:2010 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
(1.2 ~ 12) A / (12 ~ 120) A |
소재지,부속시설-1 |
| EN 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
(100 ~ 1000) A/m(peak) |
소재지,부속시설-1 |
| EN 61000-6-1:2007 |
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards
- Immunity for residential, commercial and light-industrial environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61000-6-2:2005 |
Electromagnetic compatibility (EMC)
- Part 6-2: Generic standards
- Immunity for industrial environments
Table 4: 3 phase Voltage dips and interruptions |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61000-6-3:2007+A1:2011 |
Electromagnetic compatibility (EMC)
- Part 6-3: Generic standards
- Emission standard for residential, commercial and light-industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| EN 61000-6-3:2007+A1:2011+AC:2012 |
Electromagnetic compatibility (EMC)
- Part 6-3: Generic standards
- Emission standard for residential, commercial and light-industrial environments |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz |
소재지,부속시설-1 |
| EN 61000-6-4:2007+A1:2011 |
Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards
- Emission standard for industrial environments |
CE : 15 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz |
소재지,부속시설-1 |
| EN 61204-3:2000 |
Low voltage power supplies, d.c. Output
- Part 3: Electromagnetic compatibility (EMC) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61204-3:2018 |
Low voltage power supplies, d.c. Output
- Part 3: Electromagnetic compatibility (EMC) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use-EMC requirements Part 1: General requirements |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 2.7 GHz
EFT : ± 2 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-2-1:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-2-2:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-2-3:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-2-4:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-2-5:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 61547:2009 |
Equipment for general lighting purposes-EMC immunity requirements |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 62040-2:2006 |
Uninterruptible power systems(UPS) - Part2: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 62041:2010 |
Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN 62135-2:2008 |
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| EN 62135-2:2015 |
Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지,부속시설-1 |
| EN IEC 61000-3-11:2019 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
≤ 75 A |
소재지,부속시설-1 |
| EN IEC 61000-3-2:2019 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| EN IEC 61000-3-2:2019+A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| EN IEC 61000-3-2:2019/A2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| EN IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| EN IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
15 kV |
소재지,부속시설-1 |
| EN IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
80 MHz ∼ 6 GHz |
소재지,부속시설-1 |
| EN IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz ~ 230 MHz |
소재지,부속시설-1 |
| EN IEC 61000-6-1:2019 |
Electromagnetic compatibility (EMC)
- Part 6-1: Generic standards
- Immunity for residential, commercial and light-industrial environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 1 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
M/F : 50/60 Hz, 3 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61000-6-2:2019 |
Electromagnetic compatibility (EMC)
- Part 6-2: Generic standards
- Immunity for industrial environments
Table 4: 3 phase Voltage dips and interruptions |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 2 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
M/F : 50/60 Hz, 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61000-6-3:2021 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for equipment in residential environments |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz |
소재지,부속시설-1 |
| EN IEC 61000-6-4:2019 |
Electromagnetic compatibility (EMC)
- Part 6-4: Generic standards
- Emission standard for industrial environments |
CE : 15 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz |
소재지,부속시설-1 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use-EMC requirements Part 1: General requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61326-2-1:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61326-2-2:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61326-2-3:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61326-2-4:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61326-2-5:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 2 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61800-3:2018 |
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
CE: 150 kHz ～ 30 MHz
RE: 30 MHz ～ 6 GHz
ESD: ±8 kV
RS: 80 MHz ～ 2.7 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: (0 ∼ 100) % |
소재지,부속시설-1 |
| EN IEC 61851-21-2:2021 |
Electric vehicle conductive charging system -
Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off-board electric vehicle charging systems |
CE : 9 kHz ~ 30 MHz
RE : 2 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 120 A/m
V-DIP : (0 ∼ 100) %
H/F: ≤ 16 A, ≤ 75 A
Voltage transient: (0~2) kV |
소재지,부속시설-1 |
| EN IEC 62040-2:2018 |
Uninterruptible power systems(UPS) - Part2: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| EPRI Rev.1:1997 |
Guidelines for electromagnetic interference testing in power plants |
30 Hz ~ 1 GHz,
0 V ~ 6 kV,
0 A ~ 300 A/m |
소재지,부속시설-1 |
| EPRI Rev.2:2000 |
Guidelines for electromagnetic interference testing in power plants |
30 Hz ~ 1 GHz,
0 V ~ 6 kV,
0 A ~ 300 A/m |
소재지,부속시설-1 |
| EPRI Rev.3:2004 |
Guidelines for electromagnetic interference testing of power plant equipment |
30 Hz ~ 1 GHz,
0 V ~ 6 kV,
0 A ~ 300 A/m |
소재지,부속시설-1 |
| ES 96200-00/17th:2017 |
ENGINEERING STANDARD - ENGINEERING SPECIFICATION
ELECTROMAGNETIC COMPATIBILITY |
RE: 0.1 MHz ~ 2.5 GHz
MFE: 20 Hz ~ 200 kHz
CE(Power Line) :
100 kHz ~ 108 MHz
CE(Signal Line) :
100 kHz ~ 108 MHz
RI: 20 MHz ~ 3 GHz
BCI: 1 MHz ~ 400 MHz
GSM: (900/1 800/1 900) MHz
Transceiver: (146/222/444) MHz
Portable transmitters:
146 MHz ~ 5.925 GHz
(146,156,166,176,222 MHz 구간 제외)
CTI: Pulse 1, 2a, 2b, 3a, 3b, 5b
CTE: 12 V System
ESD: ±(4 ~ 25) kV
MFI: DC, 15 Hz ~ 150 kHz |
소재지,부속시설-1 |
| ES 96200-00:L |
HYUNDAI & KIA Motors : Electromagnetic compatibility specification |
CE : 100 kHz ~ 110 MHz
RE : 100 kHz ~ 2.5 GHz
ESD : ± 30 kV
RI : 80 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5
BCI : 1∼ 400 MHz |
소재지,부속시설-1 |
| ES 96200-00:P |
HYUNDAI & KIA Motors : Electromagnetic compatibility specification |
CE : 100 kHz ~ 110 MHz
RE : 100 kHz ~ 2.5 GHz
ESD : ± 30 kV
RI : 80 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b, 5
BCI : 1 MHz ∼ 400 MHz |
소재지,부속시설-1 |
| ES-0000-0002:2014 |
전자기적합성 시험 일반 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| FCC Part15 Subpart B |
Radio Frequency Device
[Exception]
15.31 noise figure |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 40 GHz |
소재지,부속시설-1 |
| FCC Part18 |
Industrial, scientific and medical (ISM) Device |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 40 GHz |
소재지,부속시설-1 |
| GB 13837:2012 |
Sound and television broadcast receivers and associated equipment
-Radio disturbance characteristics
-Limits and methods of measurement |
0.15 MHz ~ 18 GHz |
소재지,부속시설-1 |
| GB 17625.1:2012 |
Electromagnetic compatibility-Limits-Limits for harmonic current emissions(equipment input current ≤ 16 A per phase |
≤ 16 A |
소재지,부속시설-1 |
| GB 17625.2:2007 |
Electromagnetic compatibility Limits Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current ≤ 16 A |
≤ 16 A |
소재지,부속시설-1 |
| GB 4343.1:2009 |
Electromagnetic compatibility
-Requirements for household
Appliances, electric tools and similar apparatus
-Part 1：Emission |
0.15 MHz ~ 1 GHz |
소재지,부속시설-1 |
| GB 4343.2:2009 |
Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| GB 9254:2008 |
Information technology equipment
-Radio disturbance characteristics
-Limits and methods of measurement |
0.15 MHz ~ 6 GHz |
소재지,부속시설-1 |
| GC-01-K:2022 |
한국선급 제조법 및 형식승인 등에 관한 지침
제3장 형식승인
제23절 자동화시스템
표 3.23.1 환경시험항목, 시험조건, 시험방법 및 판정기준
14. 정전기방전 내성시험
15. 전자기장 내성시험
16. 전도성 저주파 간섭에 대한 내성시험
17. 전도성 무선주파수 간섭에 대한 내성시험
18. 전기적 패스트 트랜젠트 / 버스트 내성시험
19. 서지 내성시험
20. 발산방사 측정시험
21. 전도방사 측정시험 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| GL:2003 |
Rules for Classification and Construction 2003 VI Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 2 Test Requirements for Electrical/Electronic Equipment and Systems
Section 3 Test Requirements
15: Electrostatic discharge
16: Electromagnetic fields
17: Conducted fast transients(burst)
18: Conducted high frequency interference
19: Conducted slow transients(surge)
20: Conducted low frequency interference
21: Conducted emissions
22: Radiated emissions from enclosure port |
50 Hz ~ 2 GHz, 3 V ~ 8 kV |
소재지,부속시설-1 |
| GMW 3097:2015 |
General Specification for Electrical/ Electronic Components and Subsystems, Electromagnetic Compatibility (EMC)
[Exception]
Magnetic Field |
CE : 100 kHz ~ 110 MHz
RE : 100 kHz ~ 2.5 GHz
ESD : ± 30 kV
RI : 20 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5
BCI : 10 kHz ∼ 400 MHz |
소재지,부속시설-1 |
| ICES-001:Issue5,2020 |
Spectrum Management and Telecommunications Interference - Causing Equipment Standard Industrial, Scientific and Medical(ISM) Radio Frequency Generators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| ICES-003:Issue7,2020 |
Spectrum Management and Telecommunications Interference -Causing Equipment Standard Information Technology Equipment (Including Digital Apparatus) - Limits and Methods of Measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| IEC 60092-504:2001 |
Electrical installations in ships - Part 504:
Special features - Control and instrumentation
[Exception]
Table1-Type tests, test procedures and severities
9. Salt mist |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 000 MHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 0.15 MHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60092-504:2016 |
Electrical installations in ships - Part 504: Automation, control and instrumentation
[Exception]
Table1-Type tests, test procedures and severities
9. Salt mist |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 000 MHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 0.15 MHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60255-22-3:2007 |
Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity |
RS: 80 MHz ~ 3 GHz |
소재지,부속시설-1 |
| IEC 60533:1999 |
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60533:2015 |
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60571:2012 |
Railway applications-Electronic equipment used on rolling stock
[Exception]
12.2.4 Cold start test
12.2.5 Dry heat test
12.2.6 Damp heat test, cyclic
12.2.10 insulation test
12.2.11 Salt mist test
12.2.12 Vibration, shock and bump test
12.2.13 Watertightness test
12.2.14 Equipment stress screening
12.2.15 Low temperature storage test |
Over voltage: (0 ~ 225) V
Surge: (0 ~ 4) kV
ESD: (0 ~ 15) kV
Burst: (0 ~ 4) kV
RS:25 ~ 6 GHz |
소재지,부속시설-1 |
| IEC 60601-1-2:2007 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60601-1-2:2014 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
CE : 150 kHz ~ 30 MHz
RE : 150 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60601-1-2:2014/ AMD1:2020 |
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| IEC 60601-2-10:2012 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-10:2012+A1:2016 |
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-18:2009 |
Particular requirements for the basic safety and essential performance of endoscopic equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-19:2009 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-19:2009+A1:2016 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-19:2020 |
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-2:2009 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-2:2017 |
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-22:2007+A1:2012 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-22:2019 |
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-24:2012 |
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-25:2011 |
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-27:2011 |
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-28:2010 |
Medical electrical equipment-Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-28:2017 |
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-3:2012+AMD1:2016+AMD2:2022 |
Medical electrical equipment – Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| IEC 60601-2-34:2011 |
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-37:2007 |
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60601-2-37:2007+A1:2015 |
Medical electrical equipment - Part 2-38: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60601-2-4:2010 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-4:2010+A1:2018 |
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-40:1998 |
Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-40:2016 |
Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-44:2009+A1:2012+A2:2016 |
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-45:2011+A1:2105 |
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-46:2010 |
Medical electrical equipment - Part 2-46: Particular requirements for basic safety and essential performance of operating tables |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-46:2016 |
Medical electrical equipment - Part 2-46: Particular requirements for basic safety and essential performance of operating tables |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-49:2011 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-5:2009 |
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-54:2009+A1:2015 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-54:2009+A1:2015+A2:2018 |
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-57:2011 |
Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-6:2012+AMD1:2026+AMD2:2022 |
Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| IEC 60601-2-63:2012 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-63:2012+A1:2017 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-63:2012+A2:2021 |
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-65:2012 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-65:2012+A1:2017 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60601-2-65:2012+A2:2021 |
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 60945:2002 |
Maritime Navigation and Radiocommunication Equipment and Systems
9: Electromagnetic emission
10: Immunity to electromagnetic environment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60974-10:2002 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60974-10:2014+A1:2015 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 60974-10:2020 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61000-3-11:2017 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
≤ 75 A |
소재지,부속시설-1 |
| IEC 61000-3-12:2011 |
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
≤ 75 A |
소재지,부속시설-1 |
| IEC 61000-3-12:2011+A1:2021 |
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
≤ 75 A |
소재지,부속시설-1 |
| IEC 61000-3-2:2014 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-3-2:2018 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-3-2:2018+A1:2020 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-3-2:2018+AMD1:2020+AMD2:2024 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-3-3:2013 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-3-3:2013+A1:2017 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-3-3:2013+A2:2021 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| IEC 61000-4-10:2016 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
(10 ~ 100) A/m(peak) |
소재지,부속시설-1 |
| IEC 61000-4-11:2004+A1:2017 |
Electromagnetic compatibility (EMC) - Part 4-11:
Testing and measurement techniques - Voltage
Dips, Short Interruptions and Voltage Variations
Immunity Tests |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| IEC 61000-4-11:2020 |
Electromagnetic compatibility (EMC) - Part 4-11:
Testing and measurement techniques - Voltage
Dips, Short Interruptions and Voltage Variations
Immunity Tests |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| IEC 61000-4-12:2006 |
Electromagnetic Compatibility (EMC) - Part 4-12:Testing and measurement techniques-Ring wave immunity test |
(250 ~ 6,000) V |
소재지,부속시설-1 |
| IEC 61000-4-12:2017 |
Electromagnetic Compatibility (EMC) - Part 4-12:Testing and measurement techniques-Ring wave immunity test |
(250 ~ 6,000) V |
소재지,부속시설-1 |
| IEC 61000-4-13:2002+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-13:
Testing and measurement techniques - Harmonics
and interharmonics including mains signalling at
a.c. power port, low frequency immunity tests |
16 Hz ~ 1 MHz |
소재지,부속시설-1 |
| IEC 61000-4-13:2002+A1:2009+A2:2015 |
Electromagnetic compatibility (EMC) - Part 4-13:
Testing and measurement techniques - Harmonics
and interharmonics including mains signalling at
a.c. power port, low frequency immunity tests |
16 Hz ~ 1 MHz |
소재지,부속시설-1 |
| IEC 61000-4-14:1999+A1:2001+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase |
3상 500 V, 160 A |
소재지,부속시설-1 |
| IEC 61000-4-16:2015 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
0 Hz ∼ 150 kHz |
소재지,부속시설-1 |
| IEC 61000-4-17:1999+A1:2001+A2:2008 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test |
DC 400 V |
소재지,부속시설-1 |
| IEC 61000-4-18:2006+A1:2010 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
(250 ~ 4,000) V |
소재지,부속시설-1 |
| IEC 61000-4-18:2011 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
(250 ~ 2,500) V |
소재지,부속시설-1 |
| IEC 61000-4-18:2019 |
Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test |
slow damped oscillatory wave: (250 ~ 2,500) V
(Exception)
4.3 Fast damped oscillatory wave phenomenon |
소재지,부속시설-1 |
| IEC 61000-4-2:2008 |
Electromagnetic compatibility (EMC) - Part 4-2:
Testing and measurement techniques -
Electrostatic discharge immunity test |
±15 kV |
소재지,부속시설-1 |
| IEC 61000-4-2:2025 |
Electromagnetic compatibility (EMC) - Part 4-2:
Testing and measurement techniques -
Electrostatic discharge immunity test |
±15 kV |
소재지,부속시설-1 |
| IEC 61000-4-27:2000+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques - Unbalance, immunity test for equipment with input current not exceeding 16 A per phase |
3상 500 V, 63 A |
소재지,부속시설-1 |
| IEC 61000-4-28:1999+A1:2001+A2:2009 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase |
3상 500 V, 63 A |
소재지,부속시설-1 |
| IEC 61000-4-29:2000 |
Electromagnetic compatibility (EMC) - Part 4-29:Testing and measurement techniques-Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
DC 500 V |
소재지,부속시설-1 |
| IEC 61000-4-3:2006+A1:2007+A2:2010 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
25 MHz ~ 6 GHz |
소재지,부속시설-1 |
| IEC 61000-4-3:2020 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
25 MHz ~ 6 GHz |
소재지,부속시설-1 |
| IEC 61000-4-34:2005+A1:2009 |
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
3상, (0 ∼ 500) V |
소재지,부속시설-1 |
| IEC 61000-4-4:2011 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
(0.2 ~ 4) kV |
소재지,부속시설-1 |
| IEC 61000-4-4:2012 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
(0.2 ~ 4) kV |
소재지,부속시설-1 |
| IEC 61000-4-5:2014 |
Electromagnetic compatibility (EMC)
- Part 4-5: Testing and measurement techniques
- Surge immunity test |
(0.5 ~ 15) kV |
소재지,부속시설-1 |
| IEC 61000-4-5:2014+A1:2017 |
Electromagnetic compatibility (EMC)
- Part 4-5: Testing and measurement techniques
- Surge immunity test |
(0.5 ~ 15) kV |
소재지,부속시설-1 |
| IEC 61000-4-6:2008 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ~ 1 GHz |
소재지,부속시설-1 |
| IEC 61000-4-6:2013 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ~ 1 GHz |
소재지,부속시설-1 |
| IEC 61000-4-6:2023 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
CS: 150 kHz ~ 230 MHz |
소재지,부속시설-1 |
| IEC 61000-4-8:2009 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
(1.2 ~ 12) A / (12 ~ 120) A |
소재지,부속시설-1 |
| IEC 61000-4-9:1993+A1:2000 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test |
(100 ~ 1000) A/m(peak) |
소재지,부속시설-1 |
| IEC 61000-4-9:2001 |
Electromagnetic compatibility (EMC) - Part 4-9:Testing and measurement techniques-Impulse magnetic field immunity test |
(100 ~ 1000) A/m(peak) |
소재지,부속시설-1 |
| IEC 61000-4-9:2016 |
Electromagnetic compatibility (EMC) - Part 4-9:Testing and measurement techniques-Impulse magnetic field immunity test |
(100 ~ 1000) A/m(peak) |
소재지,부속시설-1 |
| IEC 61000-6-1:2005 |
Electromagnetic compatibility (EMC) - Part 6-1:
Generic standards - Immunity standard for
residential, commercial and light-industrial
environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61000-6-1:2016 |
Electromagnetic compatibility (EMC) - Part 6-1:
Generic standards - Immunity standard for
residential, commercial and light-industrial
environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61000-6-2:2005 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61000-6-2:2016 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61000-6-3:2006+A1:2010 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| IEC 61000-6-3:2020 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| IEC 61000-6-4:2012 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| IEC 61000-6-4:2018 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| IEC 61000-6-5:2015 |
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 100 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61000-6-7:2014 |
Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 100 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61204-3:2016 |
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
MF: 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-1:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-1:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-2:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-2:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-3:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-3:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-4:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-4:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-5:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-5:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61547:2020 |
Equipment for general lighting purposes
-EMC immunity requirements |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61800-3:2017 |
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
CE: 150 kHz ～ 30 MHz
RE: 30 MHz ～ 6 GHz
ESD: ±8 kV
RS: 80 MHz ～ 2.7 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 61851-21-2:2018 |
Electric vehicle conductive charging system -
Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off-board electric vehicle charging systems |
CE : 9 kHz ~ 30 MHz
RE : 2 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ±4 kV
SURGE : ±4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 120 A/m
V-DIP : (0 ∼ 100) %
H/F: ≤ 16 A, ≤ 75 A
Voltage transient: (0~2) kV |
소재지,부속시설-1 |
| IEC 62040-2:2005 |
Uninterruptible power systems(UPS)
- Part 2: Electromagnetic compatibility(EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62040-2:2016 |
Uninterruptible power systems(UPS)
- Part 2: Electromagnetic compatibility(EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62041:2017 |
Transformers, power supplies, reactors and similar products - EMC requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
H/F: 0 kHz ~ 2 kHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-1:2018 |
Railway applications - Electromagnetic compatibility - Part 1: General |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-3-1:2018 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
RE: 150 kHz to 1 GHz |
소재지,부속시설-1 |
| IEC 62236-3-2:2008 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-3-2:2018 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-4:2008 |
Railway applications - Electromagnetic
compatibility -Part 4: Emission and immunity
of the signalling and
telecommunications apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 0 ~ 300 A/m
PMF:0 ~ 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-4:2018 |
Railway applications - Electromagnetic compatibility-Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-5:2008 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power
supply installations and apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 62236-5:2018 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power
supply installations and apparatus |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| IEC 80601-2-30:2009+A1:2013 |
Medical electrical equipment-Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-30:2018 |
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-35:2009 |
Medical electrical equipment-Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-35:2009+A1:2016 |
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-49:2018 |
Medical electrical equipment - Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
F/H : ≤16 A
ESD: ±30 kV
RS: 30 V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP:(0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-59:2008 |
Medical electrical equipment-Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-59:2017 |
Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-60:2012 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC 80601-2-60:2019 |
Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| IEC TS 60601-4-2:2024 |
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz
ESD: ±15 KV
RS: 80 MHz ~ 6 GHz
EFT: ±4 KV
SURGE: ±4 KV
CS: 150 kHz ~ 230 MHz
M/F: 30 A/M
V-DIP: (0~100)%
Proximity magneticfields: 30 kHz, 134.2 kHz , 13.56 MHz |
소재지,부속시설-1 |
| IEEE Std 1547.1:2005 |
IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems |
RS : 25 MHz ∼ 1 GHz
RING : ± 6 kV
EFT : ± 4 kV
SURGE : ± 6 kV
OSC : ± ２.５ kV |
소재지,부속시설-1 |
| IEEE Std C37.90.1:2002 |
IEEE Standard Surge Withstand Capability (SWC) Tests for Protective Relays and Relay Systems |
EFT : ± 4 kV
OSC : ± ２.５ kV |
소재지,부속시설-1 |
| IEEE Std C37.90.1:2012 |
IEEE Standard Surge Withstand Capability (SWC) Tests for Protective Relays and Relay Systems |
EFT : ± 4 kV
OSC : ± ２.５ kV |
소재지,부속시설-1 |
| IEEE Std C37.90.2:2004 |
IEEE Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference form Transceivers |
80 MHz ∼ 1 GHz |
소재지,부속시설-1 |
| IEEE Std C62.41.2:2002 |
IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less)
AC Power Circuits |
RING : ± 6 kV
EFT : ± 6 kV
SURGE : ± 6 kV
OSC : ± ２.５ kV |
소재지,부속시설-1 |
| IS/CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
RE: 9 kHz ~ 6 GHz
CE: 9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| ISO 10605:2008+A1:2014 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
ESD : 30 kV |
소재지,부속시설-1 |
| ISO 10605:2023 |
Road vehicles - Test methods for electrical disturbances from electrostatic discharge |
ESD : 30 kV |
소재지,부속시설-1 |
| ISO 11452-1:2005+A1:2008 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
General |
소재지,부속시설-1 |
| ISO 11452-1:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
General |
소재지,부속시설-1 |
| ISO 11452-1:2025 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
General |
소재지,부속시설-1 |
| ISO 11452-2:2004 |
Road vehicles - Component test methods for
electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
RS : 80 MHz ~ 18 GHz, |
소재지,부속시설-1 |
| ISO 11452-2:2019 |
Road vehicles - Component test methods for
electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
RS : 80 MHz ~ 18 GHz, |
소재지,부속시설-1 |
| ISO 11452-4:2011 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods
[Exception]
TWC test method |
BCI : 1 MHz ~ 400 MHz |
소재지,부속시설-1 |
| ISO 11452-4:2020 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods
[Exception]
TWC test method |
BCI : 100 kHz ~ 400 MHz |
소재지,부속시설-1 |
| ISO 11452-8:2007 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields |
0 Hz ∼ 150 kHz |
소재지,부속시설-1 |
| ISO 11452-8:2015 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - part 8 : Immunity to magnetic fields |
0 Hz ∼ 150 kHz |
소재지,부속시설-1 |
| ISO 11452-9:2012 |
Road vehicles - Component test methods for
electrical disturbances from narrowband radiated
electromagnetic energy - Part 9: Portable
transmitters |
26 MHz ~ 5 850 MHz |
소재지,부속시설-1 |
| ISO 11452-9:2021 |
Road vehicles - Component test methods for
electrical disturbances from narrowband radiated
electromagnetic energy - Part 9: Portable
transmitters |
26 MHz ~ 5 850 MHz |
소재지,부속시설-1 |
| ISO 16750-2:2010 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
DC 0 V ~ 100 V |
소재지,부속시설-1 |
| ISO 16750-2:2012 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 2: Electrical loads |
DC 0 V ~ 100 V |
소재지,부속시설-1 |
| ISO 7637-1:2015 |
Road vehicles - Electrical disturbances from conduction and coupling Part1: Definitions and general considerations |
General |
소재지,부속시설-1 |
| ISO 7637-1:2023 |
Road vehicles - Electrical disturbances from conduction and coupling Part1: Definitions and general considerations |
General |
소재지,부속시설-1 |
| ISO 7637-2:2011 |
Road vehicles - Electrical disturbances from conduction and coupling Part2: Electrical transient conduction along supply lines only |
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5 |
소재지,부속시설-1 |
| ISO 7637-3:2016 |
Road vehicles - Electrical disturbances from conduction and coupling Part3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
Pulse a, b |
소재지,부속시설-1 |
| ISO 80601-2-12:2011 |
Particular requirements for basic safety and essential performance of critical care ventilators |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| ISO 80601-2-55:2011 |
Medical electrical equipment-Part 2-55:Particular requirements for the basic safety and essential performance of respiratory gas monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| ISO 80601-2-55:2018 |
Medical electrical equipment-Part 2-55:Particular requirements for the basic safety and essential performance of respiratory gas monitors |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| ISO 80601-2-56:2009 |
Medical electrical equipment-Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| ISO 80601-2-56:2017 |
Medical electrical equipment-Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| ISO 80601-2-61:2011 |
Medical electrical equipment-Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| ISO 80601-2-61:2017 |
Medical electrical equipment-Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
F/H : ≤ 16 A
ESD: ±30 kV
RS: 30V/m, 80 MHz ~ 6 000 MHz
EFT/B: ±4 kV
Surge: ±4 kV
CS: 20 V, 0.15 MHz ~ 80 MHz
MF: 120 A/m
V-DIP: (0~100) % |
소재지,부속시설-1 |
| J 55014-1(H27) |
Electromagnetic compatibility
- Requirements for household
appliances, electric tools and similar apparatus
- Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| J 55015(H29) (CISPR J 15:2017) |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz |
소재지 |
| J 55032(H29) (CISPR J 32:2017) |
Electromagnetic compatibility of multimedia equipment
- Emission requirements - |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| K 61000-4-9:2002 |
시험 및 측정 기술-
제9부: 펄스자계 내성시험 |
100 ~ 1000 A/m(peak) |
소재지,부속시설-1 |
| KN 60601-1-2:2008 |
의료기기에 대한 내성시험 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KR S CS 0003-21(R):2021 |
철도차량 차상신호장치 시험방법 |
CE: 150 kHz to 30 MHz
RE: 30 MHz to 1 GHz
ESD: ±8 kV
RS: 80 MHz to 6 GHz
EFT: ± 2 kV
Surge: ± 2 kV
CS: 150 kHz to 80 MHz |
소재지,부속시설-1 |
| KR S SG 0015-20(R):2020 |
전자연동장치 |
CE : 9 kHz to 30 MHz
RE : 9 kHz to 6 GHz
ESD : ±8 kV
RS : 80 MHz to 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz to 230 MHz
M/F : 0 to 300 A/m
PMF:0 to 300 A/m
V-DIP : (0 to 100) % |
소재지,부속시설-1 |
| KR S SG 0033-21(R):2021 |
유절연 가청주파수(AF) 궤도회로 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ~ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ~ 100) % |
소재지,부속시설-1 |
| KR S SG 0036-19(R):2019 |
궤도회로기능감시장치 |
RE: 30 MHz to 1 GHz
CE: 150 kHz to 30 MHz |
소재지,부속시설-1 |
| KR S SG 0038-21(R):2021 |
무절연가청주파수(AF)궤도회로
4.5.2 전기적 빠른 과도현상 내성시험
4.5.3 서지내성 시험
4.5.4 고주파 전자계 유도전도 방해시험
4.5.5 방사 고주파 전자계 내성시험
4.5.6 정전기 방전 내성시험 |
RE : 30 k㎐ ~ 6 GHz
RS : 80 k㎐ ~ 6 GHz, 10 V/m
CE : 9 k㎐ ~ 30 MHz
ESD: ± 30 kV
EFT/Burst : ± 5 kV
Surge: ± 5 kV
CS: 0.15 MHz ~ 230 MHz, 10 V
Magnetic field: 30 A/m |
소재지,부속시설-1 |
| KR S SG 0054-21(R):2021 |
단선자동폐색제어장치 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ~ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ~ 100) % |
소재지,부속시설-1 |
| KR S SG 0055-21(R):2021 |
복선 자동폐색제어장치 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ~ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ~ 100) % |
소재지,부속시설-1 |
| KR S SG 0067-14:2014 |
지상 신호제어설비 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ±8 kV
RS : 80 MHz ~ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ~ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ~ 100) % |
소재지,부속시설-1 |
| KS C 9040-2:2017 |
무정전전원장치(UPS)-제2부:전자기 적합성(EMC)요구사항 |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9547:2020 |
일반 조명기기 - 전자파적합성(EMC) 내성 요구사항 |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9610-3-2:2023 |
전자파적합성(EMC) - 제3-2부: 허용기준 - 고조파 전류의 허용기준(상당 입력 전류 16 A이하 기기) |
≤ 16 A |
소재지,부속시설-1 |
| KS C 9610-3-3:2023 |
전자파적합성(EMC) - 제3-3부: 허용기준 - 공공 저압 배전망에 사용하는 기기의 플리커와 전압변동에 대한 허용기준(상당 16 A 이하 기기) |
≤ 16 A |
소재지,부속시설-1 |
| KS C 9610-4-11:2020 |
전자파적합성(EMC) - 제4-11부: 시험 및 측정기술 - 전압 강하, 순간 정전, 전압 변동 내성 시험 |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| KS C 9610-4-2:2017 |
전자파적합성(EMC) - 제4-2부: 시험 및 측정기술 - 정전기 방전 내성 시험 |
±15 kV |
소재지,부속시설-1 |
| KS C 9610-4-3:2017 |
전자파적합성(EMC) - 제4-3부: 시험 및 측정기술 - 방사성 RF 전자기장 내성 시험 |
25 MHz ~ 6 GHz |
소재지,부속시설-1 |
| KS C 9610-4-4:2020 |
전자파적합성(EMC) - 제4-4부: 시험 및 측정기술 - 전기적 빠른 과도현상, 버스트 내성 시험 |
(0.2 ~ 4) kV |
소재지,부속시설-1 |
| KS C 9610-4-5:2020 |
전자파적합성(EMC) - 제4-5부: 시험 및 측정기술 - 서지 내성 시험 |
(0.5 ~ 15) kV |
소재지,부속시설-1 |
| KS C 9610-4-6:2020 |
전자파적합성(EMC) - 제4-6부: 시험 및 측정기술 - 전도성 RF 전자기장 내성 시험 |
150 kHz ~ 80 MHz |
소재지,부속시설-1 |
| KS C 9610-4-8:2017 |
전자파적합성(EMC) - 제4-8부: 시험 및 측정기술 - 전원 주파수 자기장 내성 시험 |
(1.2 ~ 12) A / (12 ~ 120) A |
소재지,부속시설-1 |
| KS C 9610-4-9:2019 |
전자파적합성(EMC) - 제4-9부:시험 및 측정기술 - 펄스 자기장 내성시험 |
100 ~ 1000 A/m(peak) |
소재지,부속시설-1 |
| KS C 9610-6-1:2019 |
전자파적합성(EMC) ― 제6-1부 : 일반표준 ― 주거, 상업 및 경공업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9610-6-2:2019 |
전기자기적합성(EMC) ― 제6-2부: 일반기준 ― 산업 환경에서 사용하는 기기의 전자파 내성 표준 |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9610-6-3:2022 |
전기자기적합성(EMC) ― 제6부 : 일반 기준 ― 제3절 : 주거용·상업용·경공업 환경에서 사용하는 기기의 전기자기장해 기준 |
CE : 9 kHz ~ 30 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9610-6-4:2022 |
전자기적합성(EMC) ― 제6-4부 : 일반기준 ― 산업용 환경에서 사용하는 기기의 전기자기장해 기준 |
CE : 9 kHz ~ 30 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9811:2019 |
산업, 과학, 의료용(ISM) 기기 - 무선 주파수 방해 특성 - 허용기준 및 측정방법 |
CE : 9 kHz ~ 30 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9814-1:2020 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기류의 요구사항 - 제1부 : 방출 |
CE : 9 kHz ~ 30 MHz, DP : 30 MHz ~ 300 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9814-1:2022 |
전자파적합성(EMC) - 가정용 전기기기, 전동공구 및 유사기기류의 요구사항 - 제1부 : 방출 |
CE : 9 kHz ~ 30 MHz, DP : 30 MHz ~ 300 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9814-2:2020 |
전자파적합성(EMC) - 가정용 전기기기,
전동 공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9814-2:2022 |
전자파적합성(EMC) - 가정용 전기기기,
전동 공구 및 유사기기의 요구사항 - 제2부: 내성 |
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9815:2019 |
조명 기기 및 유사 기기의 무선 방해 특성의 측정 허용기준과 측정방법 |
CE : 9 kHz ~ 30 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9815:2023 |
조명 기기 및 유사 기기의 무선 방해 특성의 측정 허용기준과 측정방법 |
CE : 9 kHz ~ 30 MHz, RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9816-2-1:2020 |
전자파장해 및 내성 측정장비와 측정방법 - 제2-1부: 전자파 방해 및 내성 측정방법 - 전도성 방해 측정 |
9 kHz ~ 30 MHz |
소재지,부속시설-1 |
| KS C 9816-2-2:2020 |
전자파 방해 및 내성 측정장비와 측정방법 - 제2-2부: 전자파 방해 및 내성 측정방법 - 방해전력 측정 |
30 MHz ~ 300 MHz |
소재지,부속시설-1 |
| KS C 9816-2-3:2020 |
전자파 방해 및 내성 측정장비와 측정방법 - 제2-3부: 전자파 방해 및 내성 측정방법 - 방사성 방해 측정 |
9 kHz ~ 40 GHz |
소재지,부속시설-1 |
| KS C 9816-2-4:2017 |
전자파 방해 및 내성 측정장비와 측정방법 - 제2-4부: 전자파 방해 및 내성 측정방법 - 내성 측정 |
150 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9832:2023 |
멀티미디어기기 전자파적합성 - 방출 요구사항 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9832:2024 |
멀티미디어기기 전자파적합성 - 방출 요구사항 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| KS C 9835:2019 |
멀티미디어 기기 전자파 내성 시험방법 |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C 9990:2017 |
자동차 및 내연기관 구동기기류 전자파적합성(EMC) 시험방법
[제외항목]
6장 : 자동차 전자파 방해 측정방법,
8장: 자동차 전자파 내성 시험방법, 스트립선로/TEM Cell 시험 |
RE : 30 MHz ~ 1 GHz
CTI : 1,2a,2b,3a,3b,4
CTE : 12 /24 V
RI : 20 MHz ~ 2 GHz
BCI : 20 MHz ~ 400 MHz |
소재지,부속시설-1 |
| KS C 9995:2021 |
차량용 무선기기와 차량에 탑재되는 시장유통 전기ㆍ 전자 단위부품에 대한 전자파적합성 요구사항 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C CISPR 25:2011 |
차량과 보트 및 내연기관, 무선 방해 특성,
장착된 수신기 보호를 위한 측정
한계값과 측정 방법
[Exception]
5:동일한 차량의 안테나에 수신된 방출의 측정
6.5: TEM 셀(cell)법
6.6: 스트립라인(Stripline)법 |
CE : 150 kHz ~ 108 MHz
RE : 150 kHz ~ 2.5 GHz |
소재지,부속시설-1 |
| KS C IEC 60092-504:2007 |
선박용 전기 설비-제504부: 특별사항-제어 및 사용
[제외항목]
표1-형식시험, 시험절차 및 시험조건
9. 염수분부 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C IEC 60533:2013 |
선박의 전기 및 전자설비 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C IEC 60571:2012 |
철도 적용 - 철도 차량용 전자기기
[제외항목]
12.2.4 냉각 시험
12.2.5 내열성 시험
12.2.6 내습 사이클 시험
12.2.10 절연 시험
12.2.11 염수 분무 시험
12.2.12 진동, 충격 및 충돌 시험
12.2.13 방수시험
12.2.14 장비 응력 스크리닝
12.2.15 저온 저장 시험 |
Over voltage: (0 ~ 225) V
Surge: (0 ~ 4) kV
ESD: (0 ~ 15) kV
Burst: (0 ~ 4) kV
RS:25 ~ 6 GHz |
소재지,부속시설-1 |
| KS C IEC 60601-1-2:2020 |
의료용 전기기기 - 제1-2부: 기본 안전 및 필수 성능에 관한 일반 요구사항 - 보조표준: 전자파 장해 - 요구사항 및 시험 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C IEC 61000-4-10:2014 |
시험 및 측정 기술- 제10부: 감쇄진동 자기장 내성 시험 |
10 ~ 100 A/m(peak) |
소재지,부속시설-1 |
| KS C IEC 61000-4-11:2017 |
전자파적합성(EMC) 전압강하, 순시정전 및 전압변동 내성시험 |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| KS C IEC 61000-4-12:2013 |
시험 및 측정 방법- 진동파 내성 시험 |
(250 ~ 6,000) V |
소재지,부속시설-1 |
| KS C IEC 61000-4-16:2013 |
전기자기적합성(EMC)－제4-16부：시험 및 측정기술－0 Hz∼150 kHz 주파수 대역에서의 전도성 공통 모드 방해 내성 시험 |
0 Hz ∼ 150 kHz |
소재지,부속시설-1 |
| KS C IEC 61000-4-2:2017 |
전기자기 적합성(EMC)
- 제4부: 시험 및 측정기술
- 제2절: 정전기 방전 내성시험 |
±15 kV |
소재지,부속시설-1 |
| KS C IEC 61000-4-29:2014 |
전기자기적합성(EMC) - 제4-29부: 시험 및 측정 기술 - 직류전원단자에서의 전압강하, 순시정전 및 전압변동 내성시험 |
DC 500 V |
소재지,부속시설-1 |
| KS C IEC 61000-4-3:2017 |
전자파적합성(EMC) 방사 무선 주파수 전기자기장 내성시험 |
25 MHz ~ 6 GHz |
소재지,부속시설-1 |
| KS C IEC 61000-4-4:2017 |
전자파적합성(EMC) 전기적 빠른 과도현상/버스트 내성시험 |
(0.2 ~ 4) kV |
소재지,부속시설-1 |
| KS C IEC 61000-4-5:2017 |
전자파적합성(EMC) 낙뢰에 대한 내성 시험 |
(0.5 ~ 15) kV |
소재지,부속시설-1 |
| KS C IEC 61000-4-6:2017 |
전기자기 적합성(EMC)
- 제4부: 시험 및 측정기술
- 제6절: 전기자기 전도내성 시험 |
150 kHz ~ 1 GHz |
소재지,부속시설-1 |
| KS C IEC 61000-4-8:2017 |
전기자기 적합성(EMC)
- 제4부: 시험 및 측정기술
- 제8절: : 전원주파수 자계내성시험 |
(1.2 ~ 12) A / (12 ~ 120) A |
소재지,부속시설-1 |
| KS C IEC 61000-4-9:2013 |
전기자기적합성(EMC) 시험 및 측정 기술- 제9부: 펄스자계 내성시험 |
100 ~ 1000 A/m(peak) |
소재지,부속시설-1 |
| KS C IEC 62236-3-2:2016 |
철도용전기자기적합성-제3-2부:철도차량-장치 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C IEC 62236-3-2:2018 |
철도용전기자기적합성-제3-2부:철도차량-장치 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C IEC 62236-4:2016 |
철도용전기자기적합성-제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS C IEC 62236-4:2018 |
철도용전기자기적합성-제4부: 신호처리 및 통신장치의 방출 및 내성 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 0 ~ 300 A/m
PMF: 0 ~ 300 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS R IEC 61851-21-2:2018 |
전기자동차 전도성 충전시스템 - 제21-2부: 교류/직류 전원에 전도성접속을 위한 전기자동차 요구사항 - 비탑재형 전기자동차 충전시스템 EMC 요구사항 |
전도성방출 : 9 kHz ~ 30 MHz
복사성방출 : 2 kHz ~ 6 GHz
정전기방전 : ±8 kV
방사RF장 : 80 MHz ∼ 6 GHz
전기적빠른과도/버스트 : ±4 kV
전압서지 : ±4 kV
전도RF장 : 150 kHz ∼ 230 MHz
자계 : 120 A/m
전압강하와 순간정전 : (0 ∼ 100) %
고조파전류, 전압변동과 플리커: ≤ 16 A, ≤ 75 A
과도방출: (0~2) kV |
소재지,부속시설-1 |
| KS X 3124:2020 |
무선기기의 공통 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3124:2024 |
무선기기의 공통 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3125:2020 |
특정 소출력 무선기기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3125:2024 |
특정 소출력 무선기기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3126:2020 |
무선데이터통신시스템용 특정소출력 무선기기의 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3126:2024 |
무선데이터통신시스템용 특정소출력 무선기기의 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3127:2014 |
간이 무선국 전자파 적합성 시험 방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3127:2024 |
간이 무선국 전자파 적합성 시험 방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3128:2014 |
디지털 코드없는 전화기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3128:2024 |
디지털 코드없는 전화기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3129:2020 |
이동통신 단말기 및 보조기기의 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3130:2014 |
음성 및 음향 신호 전송용 특정 소출력 무선기기 전자파 적합성 시험 방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3130:2024 |
음성 및 음향 신호 전송용 특정 소출력 무선기기 전자파 적합성 시험 방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3131:2014 |
생활무전기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3131:2024 |
생활무전기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3135:2020 |
이동통신 기지국, 중계기, 보조기기의 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3136:2014 |
아마추어 무선국 기기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3136:2024 |
아마추어 무선국 기기 전자파적합성 시험방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3137:2014 |
무선 호출용 기기의 전자파 적합성 시험 방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| KS X 3137:2024 |
무선 호출용 기기의 전자파 적합성 시험 방법 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| Lloyd's Register Type Approval System Test Specification Number 1:2021 |
Specification Number 1:2021
Performance and Environmental Test Specification for the following Environmentally Tested Products used in Marine Applications:
-Electrical Equipment Control and
-Monitoring Equipment Instrumentation
and Internal Communication Equipment
-Programmable Electronic Systems
Section 22: Immunity to conducted low frequency interference
Section 23: Immunity to conducted radio interference
Section 24: Immunity to radiated radio frequency fields
Section 25: Immunity to fast low energy transients(bursts)
Section 26: Immunity to slow high energy transients(surges)
Section 27: Immunity to electrostatic discharge(ESD)
Section 28: Electromagnetic emission tests for equipment incorporating active electronic components
Section 29: Radiated Emissions
Section 30: Conducted emissions |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| MIL-STD-461E:1999 |
Requirements for the control of electromagnetic Interference Characteristics of Subsystems and equipment
[Exception]
CS109: conducted susceptibility
RE103: Radiated emission
RS105: Radiated susceptibility |
CE101 : 30 Hz ~ 10 kHz
CE102 : 10 kHz ~ 10 MHz
CE106 : 10 kHz ~ 40 GHz
RE101 : 30 Hz ~ 100 kHz
RE102 : 10 kHz ~ 18 GHz
CS101 : 30 kHz ~ 150 kHz
CS103 : 15 kHz ~ 10 GHz
CS104 : 30 Hz ~ 20 GHz
CS105 : 30 Hz ~ 20 GHz
CS114 : 10 kHz ~ 200 MHz
CS115 : IMPULSE
CS116 : 10 kHz ~ 100 MHz
RS101 : 30 Hz ~ 100 kHz
RS103 : 2 MHz ~ 18 GHz |
소재지,부속시설-1 |
| MIL-STD-461F:2007 |
Requirements for the control of
electromagnetic interference characteristics of susceptibility and equipment
[Exception]
CS109: Conducted susceptibility
RE103: Radiated emission
RS105: Radiated susceptibility |
CE101 : 30 Hz ~ 10 kHz
CE102 : 10 kHz ~ 10 MHz
CE106 : 10 kHz ~ 40 GHz
RE101 : 30 Hz ~ 100 kHz
RE102 : 10 kHz ~ 18 GHz
CS101 : 30 Hz ~ 150 kHz
CS103 : 15 kHz ~ 10 GHz
CS104 : 30 Hz ~ 20 GHz
CS105 : 30 Hz ~ 20 GHz
CS106 : 0 V ~ 660 V
CS114 : 4 kHz ~ 200 MHz
CS115 : IMPULSE
CS116 : 10 kHz ~ 100 MHz
RS101 : 30 Hz ~ 100 kHz
RS103 : 2 MHz ~ 18 GHz |
소재지,부속시설-1 |
| MIL-STD-461G:2015 |
Requirements for the control of
electromagnetic interference characteristics of susceptibility and equipment
[Exception]
CS109: Conducted susceptibility
CS117: Conducted susceptibility
RE103: Radiated emission
RS105: Radiated susceptibility |
CE101 : 30 Hz ~ 10 kHz
CE102 : 10 kHz ~ 10 MHz
CE106 : 10 kHz ~ 40 GHz
RE101 : 30 Hz ~ 100 kHz
RE102 : 10 kHz ~ 18 GHz
CS101 : 30 Hz ~ 150 kHz
CS103 : 15 kHz ~ 10 GHz
CS104 : 30 Hz ~ 20 GHz
CS105 : 30 Hz ~ 20 GHz
CS114 : 4 kHz ~ 200 MHz
CS115 : IMPULSE
CS116 : 10 kHz ~ 100 MHz
CS118 : 0 V ~ 30 kV
RS101 : 30 Hz ~ 100 kHz
RS103 : 2 MHz ~ 18 GHz |
소재지,부속시설-1 |
| MIL-STD-704F:2016 |
AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
60 Hz ~ 800 Hz |
소재지,부속시설-1 |
| NK:2021 |
Guidance for the Approval and Type Approval of Materials and Equipment for Marine use Part 7 Control and Instrumentation Equipment and Electrical Installations Chapter 1 Approval of use of automatic devices and equipment
Table 7.1-1(d∼f) Environmental Test Items, Testing conditions, Methods, and Criteria |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| NRC Reg. Guide 1.180:2000 |
Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 6 kV
SURGE : ± 6 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) %
LF : 0 ~ 150 kHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| NRC Reg. Guide 1.180:2003 |
Guidelines for evaluating electromagnetic and radio-frequency interference in safety-related instrumentation and control systems |
CE 101 : 30 Hz ~ 10 kHz
CE 102 : 10 kHz ~ ２ MHz
RE 101 : 30 Hz ~ 100 kHz
RE 102 : 2 MHz ~ 10 GHz
CS 101 : 30 kHz ~ 150 kHz
CS 114 : 10 kHz ~ 30 MHz
CS 115 : IMPULSE
CS 116 : 10 kHz ~ 100 MHz
RS 101 : 30 Hz ~ 100 kHz
RS 103 : 30 MHz ~ 10 GHz
EFT: ±6 kV
SURGE: ± 6 kV
RING: ±6 kV
ESD : ± 15 kV
LF : 0 ~ 150 kHz |
소재지,부속시설-1 |
| QCVN 18:2022/BTTTT |
National technical regulation on General Electromagnetic Compatibility for Radio Communications Equipment |
CE : 150 kHz ~ 30 MHz
RE : 30 MHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 1 kV
SURGE : ± 2 kV
CS : 150 kHz ∼ 80 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| QCVN 118:2018/BTTTT |
National technical regulation on Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE: 9 kHz ~ 30 MHz
RE: 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| QCVN 86:2019/BTTTT |
National technical regulation on electromagnetic compatibility for mobile terminals and ancillary equipment of digital cellular telecommunication systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
Surge : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| QCVN 96:2015/BTTTT |
National technical regulation on electromagnetic compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| QCVN 103:2016/BTTTT |
National technical regulation on electromagnetic compatibility for Base Station, Repeater, ancillary equipment of digital cellular telecomunications systems GSM, W-CDMA FDD and LTE |
CE: 150 kHz ~ 30 MHz
RE: 30 MHz ~ 6 GHz
ESD: ±8 kV
RS: 80 MHz ∼ 6 GHz
EFT: ±4 kV
SURGE: ±4 kV
CS: 150 kHz ∼ 80 MHz
V-DIP: (0∼100)% |
소재지,부속시설-1 |
| QCVN 112:2017/BTTTT |
National technical regulation on general electromagnetic compatibility for radio broadband data transmission equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| RINA:2022 |
Rules for the Classification of Ships (2022) Part C Machinery, Systems and Fire Protection Chapter 3 Automation Section 6 Testing
[Exception]
Cl. No.4b : Pneumatic and hydraulic power supply variation
Cl. No.12 : Salt Mist |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| RTCA DO-160G:2010 |
Environmental Conditions and Test Procedures for Airborne Equipment
Section 21.0 Emission of Radio Frequency Energy
[Exception]
21.6 Radiated RF Emission - Reverberation Chamber |
CE : 150 kHz ∼ 152 MHz
RE : 100 MHz ∼ 6 GHz |
소재지,부속시설-1 |
| S2-W-5 |
기계․기구 등에 관한 공통 기술기준[전자파분야] |
CE : 150 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 80 MHz
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SAE J 1113-11:2007 |
Immunity to Conducted Transients on Power Leads |
1,2a,2b,3a,3b,4,5a,5b |
소재지,부속시설-1 |
| SAE J 1113-13:2004 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 13: Immunity to Electrostatic Discharge |
ESD : ±25 kV |
소재지,부속시설-1 |
| SAE J 1113-13:2015 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 13: Immunity to Electrostatic Discharge |
ESD : ±25 kV |
소재지,부속시설-1 |
| SAE J 1113-2:2004 |
Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft)- Conducted Immunity, 30 Hz to 250 kHz-All Leads |
30 Hz ~ 250 kHz |
소재지,부속시설-1 |
| SAE J 1113-21:2005 |
Electromagnetic Compatibility Measurement Procedure for Vehicle Components Part 21: Immunity to Electromagnetic Fields,
10 kHz to 18 GHz, Absorber-Lined Chamber
[Exception]
Frequency: 10 kHz ~ 2MHz
Level: 60, 80, 100 V/m (Vertical: Up to 100 MHz, Horizontal: Up to 400 MHz) |
80 MHz ~ 3 000 MHz
(100 V/m) |
소재지,부속시설-1 |
| SAE J 1113-4:2014 |
Immunity to Radiated Electromagnetic Fields Bulk Current Injection (BCI) Method |
BCI : 1 MHz ~ 400 MHz |
소재지,부속시설-1 |
| SAE J 1113-41:2006 |
Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers used on Board Vehicles
[Exception]
TEM Cell Method |
CE(Power Line) : 150 kHz ∼ 108 MHz
CE(Signal Line) : 150 kHz ∼ 108 MHz
RE : 150 kHz ∼ 960 MHz |
소재지,부속시설-1 |
| SANS 211:2010 |
Industrial, scientific and medical equipment -Radio frequency disturbance characteristics -Limits and methods of measurement |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| SANS 214-1:2020 |
Electromagnetic compatibility
-Requirements for household appliances, electric tools and similar apparatus Part 1: Emission |
CE : 9 kHz ~ 30 MHz
DP : 30 MHz ~ 300 MHz
RE : 9 kHz ~ 1 GHz |
소재지,부속시설-1 |
| SANS 214-2:2009 |
Electromagnetic compatibility
- Requirements for household appliances, electric tools and similar apparatus
- Part 2: Immunity - Product family standard |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 215:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| SANS 2332:2017 |
Electromagnetic compatibility of multimedia equipment - Emission requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| SANS 2335:2018 |
Electromagnetic compatibility of multimedia equipment - Immunity requirements
[Exception]
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21: 2011
4.2.7 Broadband impulse conducted disturbances |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 60601-1-2:2014 |
Medical electrical equipment -
Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61000-3-11:2003 |
Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection |
≤ 75 A |
소재지,부속시설-1 |
| SANS 61000-3-12:2012 |
Electromagnetic compatibility (EMC) Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
≤ 75 A |
소재지,부속시설-1 |
| SANS 61000-3-2:2009 |
Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤ 16 A |
소재지,부속시설-1 |
| SANS 61000-3-3:2009 |
Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in pubic low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
≤ 16 A |
소재지,부속시설-1 |
| SANS 61000-4-10:2003 |
Electromagnetic compatibility (EMC) Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test |
(10 ~ 100) A/m(peak) |
소재지,부속시설-1 |
| SANS 61000-4-11:2005 |
Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
≤ 16 A, 50 Hz / 60 Hz |
소재지,부속시설-1 |
| SANS 61000-4-12:2007 |
Electromagnetic compatibility (EMC) Part 4-12: Testing and measurement techniques - Ring wave immunity test |
(250 ~ 6,000) V |
소재지,부속시설-1 |
| SANS 61000-4-2:2009 |
Electromagnetic compatibility (EMC) Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
±15 kV |
소재지,부속시설-1 |
| SANS 61000-4-3:2008 |
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio - frequency, electromagnetic field immunity test |
25 MHz ~ 6 000 MHz |
소재지,부속시설-1 |
| SANS 61000-4-4:2011 |
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
(0.2 ~ 4) kV |
소재지,부속시설-1 |
| SANS 61000-4-5:2006 |
Electromagnetic compatibility (EMC) Part 4-5: Testing and measurement techniques - Surge immunity test |
(0.5 ~ 15) kV |
소재지,부속시설-1 |
| SANS 61000-4-6:2017 |
Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
150 kHz ~ 1 GHz |
소재지,부속시설-1 |
| SANS 61000-4-8:2009 |
Electromagnetic compatibility (EMC) Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
(1.2 ~ 12) A / (12 ~ 120) A |
소재지,부속시설-1 |
| SANS 61000-4-9:2003 |
Electromagnetic compatibility (EMC) Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test |
(100 ~ 1000) A/m(peak) |
소재지,부속시설-1 |
| SANS 61000-6-1:2005 |
Electromagnetic compatibility (EMC) Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61000-6-2:2005 |
Electromagnetic compatibility (EMC) Part 6-2: Generic standards - Immunity for industrial environments |
ESD : ± 8 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61000-6-3:2011 |
Electromagnetic compatibility (EMC) Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| SANS 61000-6-4:2011 |
Electromagnetic compatibility (EMC) Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| SANS 61000-6-4:2017 |
Electromagnetic compatibility (EMC)Part 6-4: Generic standards - Emission standard for industrial environments |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz |
소재지,부속시설-1 |
| SANS 61326-1:2007 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 1: General requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61326-2-1:2009 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61326-2-2:2009 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61326-2-3:2009 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-3: Particular requirements - Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61326-2-4:2009 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61326-2-5:2009 |
Electrical equipment for measurement, control and laboratory use - EMC requirements Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP3/2 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 18 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61547:2021 |
Equipment for general lighting purposes -
EMC immunity requirements |
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 61800-3:2013 |
Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods |
CE: 150 kHz ～ 30 MHz
RE: 30 MHz ～ 6 GHz
ESD: ±8 kV
RS: 80 MHz ～ 2.7 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: (0 ∼ 100) % |
소재지,부속시설-1 |
| SANS 62040-2:2007 |
Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 8 kV
RS : 80 MHz ∼ 3 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| SESE 922:2018 |
Component test method of electromagnetic compatibility |
CE : 100 kHz ~ 108 MHz
RE : 100 kHz ~ 2.5 GHz
ESD : ± 25 kV
RI : 80 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b
BCI : 1∼ 400 MHz
MFI : DC, 15 Hz ~150 kHz
MFE : 20 Hz ~ 200 kHz
RE(Loop Antenna) :150kHz~30MHz
DCC slow +/-, Fast a,b
VTE |
소재지,부속시설-1 |
| SGSF-04-2012-07 |
에너지저장 시스템용 전력변환장치의 성능 요구사항 |
RE: 30 MHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz
ESD: ±8 kV
RS: 80 MHz ～ 6 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: max 100 % |
소재지,부속시설-1 |
| SPS-SGSF-04-2013-02 |
전기저장장치-제1부: 단상 저압연계용 전기저장장치의 일반 요구사항 및 시험방법 |
RE: 30 MHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz
ESD: ±8 kV
RS: 80 MHz ～ 6 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: max 100 % |
소재지,부속시설-1 |
| SPS-SGSF-04-2013-03 |
전기저장장치-제2부: 삼상 저압연계용 전기저장장치의 일반 요구사항 및 시험방법 |
RE: 30 MHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz
ESD: ±8 kV
RS: 80 MHz ～ 6 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: max 100 % |
소재지,부속시설-1 |
| SPS-SGSF-045-1-3-6195 |
전기저장시스템-제3부: 수요관리용 전기저장시스템 일반 요구사항 및 시험방법 |
RE: 30 MHz ∼ 1 GHz
CE : 150 kHz ∼ 30 MHz
ESD: ±8 kV
RS: 80 MHz ～ 6 GHz
EFT: ±2 kV
Surge: ±2 kV
CS: 150 kHz ～ 80 MHz
V-DIP: max 100 % |
소재지,부속시설-1 |
| TL 82066:2006 |
VOLKSWAGEN AG - Electromagnetic
compatibility of Automotive Electronic
Components (Conducted Interference) |
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5 |
소재지,부속시설-1 |
| TL 82166:2004 |
VOLKSWAGEN AG - Electromagnetic
compatibility of Automotive Electronic
Components (Radiated Interference) |
BCI : 1 MHz ∼ 400 MHz
ALSE : 80 MHz ∼ 3 GHz |
소재지,부속시설-1 |
| TL 82366:2008 |
VOLKSWAGEN AG - Electromagnetic
compatibility of Automotive Electronic
Components
(Coupled Interference on sensor cables) |
CCC 3a,3b |
소재지,부속시설-1 |
| TL 82466:2009 |
VOLKSWAGEN AG - Immunity to electrostatic discharges(ESD) |
±15 kV |
소재지,부속시설-1 |
| TL 965:2006 |
VOLKSWAGEN AG - Interference Emission |
AN test : 100 kHz ∼ 108 MHz
RE test : 100 kHz ∼ 2 690 MHz
CP test : 30 MHz ∼ 108 MHz |
소재지,부속시설-1 |
| UN Regulation No.10:2014 |
Uniform provisions concerning the approval of
vehicles with regard to electromagnetic
compatibility
Annex 8 Method of measurement of radiated
narrowband electromagnetic emissions from
electrical/electronic subassemblies |
CE : 100 kHz ~ 110 MHz
RE : 100 kHz ~ 2.5 GHz
ESD : ± 30 kV
RI : 20 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b, 4, 5
BCI : 10 kHz ∼ 400 MHz |
소재지,부속시설-1 |
| UN Regulation No.10:2020 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility Annex 8 Method of measurement of radiated narrowband electromagnetic emissions from electrical/electronic subassemblies |
RE : 30 MHz ~ 1 GHz
RI : 80 MHz ∼ 2 GHz
TI : Pulse 1, 2a, 2b, 3a, 3b, 4,
BCI : 1MHz ∼ 400 MHz |
소재지,부속시설-1 |
식품의약품안전처 고시 제2020-12호
(2020.02.25) |
의료기기의 전자파 안전에 관한 공통기준규격 |
CE : 9 kHz ~ 30 MHz
RE : 9 kHz ~ 6 GHz
ESD : ± 15 kV
RS : 80 MHz ∼ 6 GHz
EFT : ± 4 kV
SURGE : ± 4 kV
CS : 150 kHz ∼ 230 MHz
M/F : 30 A/m
V-DIP : (0 ∼ 100) % |
소재지,부속시설-1 |
| ▶ 에너지효율 |
| EN 50563:2011+A1:2013 |
External a.c. - d.c. and a.c. - power supplied - Determination of no-load power and average efficiency of active modes |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| EN 50564:2011 |
Electrical and electronic household and office equipment - Measurement of low power consumption |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| EN 62018:2003 |
Power consumption of information technology equipment - Measurement methods |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| ENERGY STAR Program Requirements Product Specification for Audio/Video Version 3.0 |
ENERGY STAR test method, ENERGY STAR program requirements product specification for audio/video |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| ENERGY STAR Program Requirements Product Specification for Computers Version 8.0 |
ENERGY STAR test method, ENERGY STAR program requirements product specification for computer |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| ENERGY STAR Program Requirements Product Specification for Displays Version 8.0 |
ENERGY STAR test method, ENERGY STAR program requirements product specification for displays |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| ENERGY STAR Program Requirements Product Specification for Imaging Equipment Version 3.2 |
ENERGY STAR test method, ENERGY STAR program requirements product specification for imaging equipment |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| ENERGY STAR Program Requirements Product Specification for Televisions Version 9.1 |
ENERGY STAR test method, ENERGY STAR program requirements product specification for televisions |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62018:2003(Ed.1.0) |
Power consumption of information technology equipment - Measurement methods |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-1:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption -
Part 1: General |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-2:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption -
Part 2: Signals and media |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-2:2023(Ed.2.0) |
Audio, video and related equipment - Determination of power consumption -
Part 2: Signals and media |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-3:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption -
Part 3: Television sets |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-3:2023(Ed.2.0) |
Audio, video and related equipment - Determination of power consumption -
Part 3: Television sets |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-4:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption -
Part 4: Video recording equipment |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-5:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption -
Part 5: Set-top-boxes |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62087-6:2015(Ed.1.0) |
Audio, video and related equipment - Determination of power consumption -
Part 6: Audio equipment |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| IEC 62301:2011(Ed.2.0) |
Household electrical appliances - Measurement of standby power |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| KS C IEC 62018:2003 |
정보기술기기의 소비전력 측정 방법 |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| KS C IEC 62301:2011 |
가정용 전기기기의 대기전력 측정 방법 |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| 기후에너지환경부고시 제2026-4호 (2026.01.12) |
고효율에너지기자재 보급촉진에 관한 규정 제3조(고효율에너지인증대상기자재)의
9. LED 유도등 |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| 기후에너지환경부고시 제2026-25호 (2026.01.23) |
대기전력저감 프로그램 운용규정
[제외항목]
제3조(대기전력 저감 대상제품의 지정 등) ①의
19.(홈게이트웨이) |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| 기후에너지환경부고시 제2026-137호 (2026.05.27) |
효율관리기자재 운용규정 제4조(효율관리 기자재의 지정 및 범위와 측정방법 등) ①의
20.(어댑터·충전기)
26.(텔레비전수상기)
36.(전기레인지)
37.(셋톱박스)
44.(모니터)
49.(컴퓨터) |
Input Voltage: Max. 1 000 V
Input Current: Max. 50 A
Input Wattage: Max. 3 000 W |
부속시설-1 |
| ▶ 환경 및 신뢰성 |
| ABS Rules for Building and Classing Marine Vessels:2026 |
Rules for Building and Classing Marine Vessels
/ Part 4 Vessel Systems and Machinery Chapter 9 Automation Section 9 Equipment
[Exception]
No. 2 : Power supply variations(continued) (b) Pneumatic and hydraulic
No. 11 : Electrostatic discharge
No. 12 : Electromagnetic field
No. 13 : Conducted Low Frequency
No. 14 : Conducted Radio Frequency
No. 15 : Electrical Fast Transients/Burst
No. 16. : Surge
No. 17 : Radiated Emission
No. 18 : Conducted Emission
No. 19 : Flame retardant |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| BS EN 60529:1992+A2:2013 |
Degrees of protection provided by enclosures
(IP Code) |
오실레이터: (400 ~ 2 000) mm
노즐: (6.3 ~ 12.5) mm
살수: (0.07 ~ 100) L/min
프로브 지름, 길이: (1 ~ 50) mm, (80 ~ 100) mm |
소재지 |
| BV:2025 |
Rules for the Classification of Steel Ships (2024) Part C (Machinery, Electricity, Automation and Fire Protection) Chapter 3 (Automation) Section 6 (Testing)
[Exception]
No. 4c : Pneumatic and hydraulic power supply variations
No. 13 : Electrostatic discharge
No. 14 : Electromagnetic field
No. 15 : Conducted low Frequency
No. 16 : Conducted Radio Frequency
No. 17 : Electrical Fast Transients / Burst
No. 18 : Surge
No. 19 : Radiated Emission
No. 20 : Conducted Emission
No. 21 : Flame retardant |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| DNV-CG-0339:2021 |
Environmental test specification for electrical, electronic and programmable equipment and systems
/ SECTION 3 ENVIRONMENTAL TYPE TEST SPECIFICATION
[Exception]
5 : Power Supply Variation Tests
(Table 4 Pneumatic / Hydraulic Power Supply)
14 : Electromagnetic compatibility (EMC)
15 Special purpose tests
16 Additional tests |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| E10:2023 |
Test Specification for Type Approval (Rev.9 Aug 2023)
[Exception]
No. 4 : Power supply variations b) pneumatic and hydraulic
No. 13 : Electrostatic discharge
No. 14 : Electromagnetic field
No. 15 : Conducted low Frequency
No. 16 : Conducted Radio Frequency
No. 17 : Electrical Fast Transients Burst
No. 18 : Surge
No. 19 : Radiated Emission
No. 20 : Conducted Emission
No. 21 : Flame retardant |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| EN 50155:2021 |
Railway applications-Rolling stock - Electronic equipment
[Exception]
13.4.9 EMC test
13.4.11 Vibration and shock test(1 000 m/s²)
13.4.12 Equipment stress screening test |
온도: (-40 ~ 85) ℃
진동주파수: (2 ~ 500) Hz
온습도: (25 ~ 55) ℃, (80 ~ 95) % R.H.
절연저항: (0 ~ 4 500) MΩ
진동가속도: (0.37 ~ 300) m/s²
충격가속도: (30 ~ 50) m/s²
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| EN 60068-2-1:2025 |
Environmental Testing - Part 2 - 1:Tests
- Test A : Cold |
온도: (-65 ~ +5) ℃ |
소재지 |
| EN 60068-2-14:2023 |
Environmental testing - Part 2 - 14: Tests
- Test N: Change of temperature
[Exception]
9 Test Nc: Rapid change of temperature, two - fluid - bath method |
온도: (-65 ~ 200) ℃ |
소재지 |
| EN 60068-2-2:2025 |
Basic Environmental Testing - Part 2 - 2:Tests
- Test B : Dry Heat
(Exceeding 175 ℃ excluded) |
온도: (35 ~ 100) ℃ |
소재지 |
| EN 60068-2-30:2025 |
Environmental Testing
- Part 2 - 30:Tests
- Test Db: Damp heat, cyclic(12h+12h cycle) |
온습도: (25 ~ 55) ℃, (80 ~ 95) % R.H. |
소재지 |
| EN 60068-2-6:2008 |
Environmental Testing
- Part 2 - 6: Tests
- Test Fc: Vibration(Sinusoidal)
[Exception]
5.1.2 Upper frequency
(5 000 Hz) |
진동주파수: (1 ~ 2 000) Hz
진동가속도: (1 ~ 50) m/s² |
소재지 |
| EN 60945:2002 |
Maritime navigation and radiocommunication equipment and system - General requirements - Methods of testing and required test results
7.1 : Extreme power supply
7.2 : Excessive conditions
7.3 : Power supply short - term variation
7.4 : Power supply failure
8.1 : General
8.2 : Dry heat
8.3 : Damp heat
8.4 : Low temperature
8.7 : Vibration
8.8 : Rain and spray (exposed equipment)
8.12 : Corrosion (salt mist) (all equipment categories)
12.1 : Protection against accidental access to dangerous voltages
[Exception]
8.5 Thermal shock (portable equipment)
8.6 Drop (portable equipment)
8.9 Immersion
8.10 Solar radiation (portable equipment)
8.11 Oil resistance (portable equipment)
9. Electromagnetic emission - Methods of testing and required test results
10. Immunity to electromagnetic environment - Methods of testing and required test
11. Special purpose tests - Methods of testing and required test results
12.2 Electromagnetic radio frequency radiation
12.3 Emission from visual display unit (VDU)
12.4 X-radiation |
전압: (0 ~ 300) V
시간: (30 ~ 60) s
고온: (55 ~ 70) ℃
온습도: 40 ℃, 95 % R.H.
저온: (-25 ~ -15) ℃
진동주파수: (2 ~ 100) Hz
진동가속도: 7 m/s²
살수: 100 L/min
프로브: 80 mm
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| EN 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests
[Exception]
10 Shock testing conditions(1 000 m/s²) |
진동주파수: (1 ~ 500) Hz
진동가속도: (0.37 ~ 144) m/s²
충격가속도: (10 ~ 500) m/s² |
소재지 |
| GC-01-K:2025 |
한국선급 제조법 및 형식승인 등에 관한 지침
제3장 형식승인
제23절 자동화시스템
2304. 형식시험
[제외항목]
5. 동력원변동시험
14. 정전기방전 내성시험
15. 전자기장 내성시험
16. 전도성 저주파 간섭에 대한 내성시험
17. 전도성 무선주파수 간섭에 대한 내성시험
18. 전기적 패스트 트랜젠트 / 버스트 내성시험
19. 서지 내성시험
20. 발산방사 측정시험
21. 전도방사 측정시험
22. 난연성시험
23. 내압력시험 |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| IEC 60068-2-1:2025 |
Environmental Testing - Part 2 - 1:Tests
- Test A : Cold |
온도: (-65 ~ +5) ℃ |
소재지 |
| IEC 60068-2-14:2023 |
Environmental testing - Part 2 - 14:Tests
- Test N : Change of temperature
(less than - 65 ℃ and exceeding 200 ℃ excluded)
[Exception]
9 Test Nc: Rapid change of temperature, two - fluid - bath method |
온도: (-65 ~ 200) ℃ |
소재지 |
| IEC 60068-2-18:2017 |
Environmental Testing - Part 2 - 18: Tests - Test R and Guidance: Water
[Exception]
5.2 Method Ra 1: Artificial rain
7.3 Method Rc 2: Pressurized water chamber |
살수: (1 ~ 100) L/min |
소재지 |
| IEC 60068-2-2:2025 |
Basic Environmental Testing - Part 2 - 2:Tests - Test B : Dry Heat
(Exceeding 175 ℃ excluded) |
온도: (35 ~ 175) ℃ |
소재지 |
| IEC 60068-2-27:2008 |
환경 시험 - 제2부 : 시험 - 시험 Ea와 지침 : 충격
[제외항목]
5. 가혹도 (1 000 m/s² ~ 30 000 m/s²) |
충격가속도: (50 ~ 500) m/s² |
소재지 |
| IEC 60068-2-30:2025 |
Environmental Testing
- Part 2 - 30:Tests
- Test Db: Damp heat, cyclic(12h+12h cycle) |
온습도: (25 ~ 55) ℃, (80 ~ 95) % R.H. |
소재지 |
| IEC 60068-2-31:2008 |
Environmental testing - Part 2 - 31: Tests - Test Ec: Rough handling shocks, primarily for equipment - type specimens
[Exception]
5.1 Drop and topple |
높이: 100 mm |
소재지 |
| IEC 60068-2-38:2021 |
Environmental Testing
- Part 2 - 38: Tests
- Test Z/AD : Composite temperature/humidity cyclic test |
온습도: (-10 ~ 65) ℃, (80 ~ 95) %R.H. |
소재지 |
| IEC 60068-2-52:2017 |
Environmental testing -
Part2: Tests - Test Kb: Salt mist, cyclic(sodium chloride solution)
[Exception]
6.2.2 Acidified salt solution |
온습도: 40 ℃, 93 %R.H.
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| IEC 60068-2-57:2013 |
Environmental testing - Part 2 - 57: Tests - Test Ff: Vibration - Time - history and sine - beat method |
진동주파수: (0.1 ~ 100) Hz
진동가속도: (1 ~ 50) m/s² |
소재지 |
| IEC 60068-2-6:2007 |
Environmental Testing
- Part 2 - 6:Tests
- Test Fc : Vibration(Sinusoidal)
[Exception]
5.1.2 Upper frequency
(5 000 Hz) |
진동주파수: (1 ~ 2 000) Hz
진동가속도: (1 ~ 50) m/s² |
소재지 |
| IEC 60068-2-64:2008+AMD1:2019 |
Environmental testing
- Part 2 - 64: Tests
- Test Fh: Vibration, broadband random and guidance |
진동주파수: (1 ~ 2 000) Hz
진동가속도: (1 ~ 280) m/s² |
소재지 |
| IEC 60068-2-67:1995+AMD1:2019 |
Environmental testing
- Part 2 - 67: Tests
- Test Cy: Damp heat, steady state, accelerated test primarily intended for components |
온습도: - 70 ℃ ~ 175 ℃ (95 % R.H.) |
소재지 |
| IEC 60068-2-75:2014+AMD1:2025 |
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
에너지량:(0.2 ~ 50) J |
소재지 |
| IEC 60068-2-78:2025 |
Environmental Testing
- Part 2 - 78: Tests
- Test Cab : Damp heat, steady state |
온습도: - 70 ℃ ~ 175 ℃ (95 % R.H.) |
소재지 |
| IEC 60092-504:2016 |
Electrical installations in ships - Part 504 : Automation and control and instrumentation
[Exception]
No. 13 : Electrostatic discharge
No. 14 : Electromagnetic field
No. 15 : Conducted low frequency
No. 16 : Conducted radio frequency
No. 17 : Burst/fast transients
No. 18 : Surge/slow transients
No. 19 : Radiated emission
No. 20 : Conducted emission |
전압: (0 ~ 300) V
시간: (30 ~ 60) s
고온: (55 ~ 70) ℃
온습도: 40 ℃, 95 % R.H.
저온: (-25 ~ -15) ℃
진동주파수: (2 ~ 100) Hz
진동가속도: 7 m/s²
살수: 100 L/min
프로브: 80 mm
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| IEC 60255-21-1:1988 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal) |
진동주파수: (10 ~ 150) Hz
충격가속도: (0.5 ~ 2.0) g |
소재지 |
| IEC 60255-21-2:1988 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests |
충격가속도: (5 ~ 30) g |
소재지 |
| IEC 60529:1989+A1:1999+A2:2013 |
Degrees of protection provided by enclosures
(IP Code) |
오실레이터: (400 ~ 2 000) mm
노즐: (6.3 ~ 12.5) mm
살수: (0.07 ~ 100) L/min
프로브 지름, 길이: (1 ~ 50) mm, (80 ~ 100) mm |
소재지 |
| IEC 60571:2012 |
Railway applications - Electronic equipment used on rolling stock
[Exception]
12.2.7 Supply overvoltages
12.2.8 Surges, electrostatic discharge and transient burst susceptibility tests
12.2.9 Radio frequency test
12.2.12 Vibration, shock and bump test(1 000 m/s²)
12.2.14 Equipment stress screening |
온도: (-40 ~ 85) ℃
진동주파수: (2 ~ 500) Hz
온습도: (25 ~ 55) ℃, (80 ~ 95) % R.H.
절연저항: (0 ~ 4 500) MΩ
진동가속도: (0.37 ~ 300) m/s²
충격가속도: (30 ~ 50) m/s²
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| IEC 60601-1-11:2015+AMD1:2020 |
Medical electrical equipment - Part 1 - 11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
10.1.2 * Requirements for mechanical strength for non - TRANSIT - OPERABLE ME EQUIPMENT
10.1.3 * Requirements for mechanical strength for TRANSIT - OPERABLE ME EQUIPMENT
[Exception]
10.1.2 * Requirements for mechanical strength for non - TRANSIT - OPERABLE ME EQUIPMENT (1 000 m/s²) |
진동주파수: (10 ~ 2 000) Hz
충격가속도: (0.5 ~ 300) m/s² |
소재지 |
| IEC 60945:2002 |
Maritime navigation and radiocommunication equipment and System - General requirements - Methods of testing and required test results
7.1 : Extreme power supply
7.2 : Excessive conditions
7.3 : Power supply short - term variation
7.4 : Power supply failure
8.1 : General
8.2 : Dry heat
8.3 : Damp heat
8.4 : Low temperature
8.7 : Vibration
8.8 : Rain and spray (exposed equipment)
8.12 : Corrosion (salt mist) (all equipment categories)
12.1 : Protection against accidental access to dangerous voltages
[Exception]
8.5 Thermal shock (portable equipment)
8.6 Drop (portable equipment)
8.9 Immersion
8.10 Solar radiation (portable equipment)
8.11 Oil resistance (portable equipment)
9. Electromagnetic emission - Methods of testing and required test results
10. Immunity to electromagnetic environment - Methods of testing and required test
11. Special purpose tests - Methods of testing and required test results
12.2 Electromagnetic radio frequency radiation
12.3 Emission from visual display unit (VDU)
12.4 X-radiation |
전압: (0 ~ 300) V
시간: (30 ~ 60) s
고온: (55 ~ 70) ℃
온습도: 40 ℃, 95 % R.H.
저온: (-25 ~ -15) ℃
진동주파수: (2 ~ 100) Hz
진동가속도: 7 m/s²
살수: 100 L/min
프로브: 80 mm
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| IEC 60950-22:2016 |
Information technology equipment - Safety - Part22: Equipment to be installed outdoors
[Exception]
8.2 Resistance to ultra - violet radiation
8.3 Resistance to corrosion
11 Outdoor equipment containing vented
batteries
Annex A Water - saturated sulphur dioxide
atmosphere
Annex C Ultraviolet light conditioning test
Annex D.2 Tensile strength and elongation tests
Annex D.3 Compression test
Annex D.4 Oil immersion test |
IP: IPX4, IP5X, IP6X |
소재지 |
| IEC 61373:2010 |
Railway applications - Rolling stock equipment - Shock and vibration tests
[Exception]
10.5 Shock testing conditions(1 000 m/s²) |
Frequency: (1 ~ 500) Hz
Acceleration: (0.37 ~ 300) m/s²
Shock Acceleration: (10 ~ 500) m/s² |
소재지 |
| IEC 62262:2002+AMD1:2021 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
충격에너지: (0.2 ~ 50) J |
소재지 |
| IEC 62498-3:2010 |
Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications |
진동주파수: (5 ∼2 000) ㎐,
가속도:최대 500 m/s² |
소재지 |
| IEC 60068-2-11:2021 |
Environmental testing - Part 2-11: Tests - Test Ka: Salt mist |
온도: 35 ℃
염도: 5 %
pH값: (6.5~7.2) pH |
소재지 |
| ISO 16750-3:2012 |
Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 3: Mechanical loads |
온도: (-50 ∼ 150) °C
주파수: (1 ∼ 2 000) Hz |
소재지 |
| ISO 16750-4:2010 |
Road vehicles - Environmental conditions and testing for electrical and
electronic equipment - Part 4: Climatic loads |
온도: (-70 ~ 175) ℃
습도: (50 ~ 95) %R.H.
염수온도: 35 ℃
염도: 5 %
pH값: (6.5 ~ 7.2) pH |
소재지 |
| KS C 5078:2015 |
자동차용 사고영상기록장치
7.3 내환경시험 |
온도: (-25 ~ 90) ℃
진동주파수: (5 ~ 500) Hz
가속도: (0.98 ~ 500) m/s² |
소재지 |
| KS C 7620:2003 |
철도 차량용 형광등 기구
[제외항목]
7.2 특성 시험
7.8 수명 시험
7.11 광속비 시험
7.13 잡음의 세기 시험 |
온도상승: (0 ~ 100) ℃
절연저항: (0 ~ 4 500) MΩ
고온: (20 ~ 55) ℃
전압: (0 ~ 110) V d.c. |
소재지 |
| KS C IEC 60068-2-1:2007 |
환경 시험 - 제2-1부: 시험 - 시험 A: 내한성 시험 |
온도: (-65 ~ +5) ℃ |
소재지 |
| KS C IEC 60068-2-11:2021 |
환경 시험 - 제2-11부: 시험 - 시험Ka: 염수분무시험 |
온도: 35 ℃
염도: 5 %
pH값: (6.5~7.2) pH |
소재지 |
| KS C IEC 60068-2-14:2023 |
환경 시험 - 제2-14부：시험 - 시험 N：온도 변화
Environmental testing - Part 2-14：Tests - Test N：Change of temperature
[제외항목]
9 시험 Nc: 온도의 급변(2욕조법) |
온도: (-65 ~ 200) ℃ |
소재지 |
| KS C IEC 60068-2-18:2017 |
환경 시험 - 제2-18부: 시험 - 시험 R과 지침: 물
[제외항목]
5.2방법 Ra 1: 인공강우
7.3 방법 Rc 2: 가압수 챔버 |
살수: (1 ~ 100) L/min |
소재지 |
| KS C IEC 60068-2-2:2007 |
환경 시험 - 제2-2부: 시험 - 시험 B : 내열성 시험 |
온도: (35 ~ 100) ℃ |
소재지 |
| KS C IEC 60068-2-27:2008 |
환경 시험－제2-27부：시험－시험 Ea와 지침：충격 시험
- 발행일 : 2017-03-10
[제외항목]
5. 가혹도
(1 000 m/s2~ 30 000 m/s²) |
충격 가속 B 도 : ( 10 ~ 500 ) ㎨
펄스 작용시간 : ( 1 ~ 30 ) ms |
소재지 |
| KS C IEC 60068-2-30:2005 |
환경 시험 - 제2-30부: 시험 - 시험 Db와 지침: 내습 사이클(12+12-h 사이클) |
온습도: (25 ~ 55) ℃, (80 ~ 95) % R.H. |
소재지 |
| KS C IEC 60068-2-31:2008 |
환경 시험 - 제2-31부 : 시험 - 시험Ec : 주로 장비형 시편에 사용하는 거친 취급 시 충격
[제외항목]
5.1 떨어짐과 넘어짐 |
높이: 100 mm |
소재지 |
| KS C IEC 60068-2-38:2021 |
환경 시험 - 제2-38부: 시험 - 시험 Z/AD: 합성 온도/습도 사이클 시험 |
온습도: (-10 ~ 65) ℃, (80 ~ 95) %R.H. |
소재지 |
| KS C IEC 60068-2-52:2017 |
환경 시험 - 제2부: 시험 - 시험 Kb : 염수분무, 싸이클(염화소듐 용액)
[제외항목]
6.2.2산성화된 염용액 |
온습도: 40 ℃, 93 %R.H.
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| KS C IEC 60068-2-6:2015 |
환경 시험 - 제2-6부 : 시험 - 시험 Fc : 진동(정현파)
[제외항목]
5.1.2상한주파수(5 000 Hz) |
진동주파수: (1 ~ 2 000) Hz
진동가속도: (1 ~ 500) m/s² |
소재지 |
| KS C IEC 60068-2-64:2019 |
환경 시험 - 제2-64부: 시험 - 시험 Fh: 광대역 불규칙 진동 시험 및 지침
[제외항목]
5.1 시험 진동수 범위 |
진동주파수: (1 ~ 2 000) Hz
진동가속도: (1 ~ 280) m/s² |
소재지 |
| KS C IEC 60068-2-67:2019 |
환경 시험 - 제2-67부: 안정 상태의 내습성 시험, 부품의 가속 시험에 적용 |
온습도: - 70 ℃~ 175 ℃ (95 % R.H.) |
소재지 |
| KS C IEC 60068-2-75:2014 |
환경 시험 - 제2-75부: 시험 - 시험 Eh: 해머 시험 |
에너지량:(0.2 ~ 50) J |
소재지 |
| KS C IEC 60068-2-78:2012 |
환경 시험 - 제2-78부: 시험 - 시험 Cab: 안정 상태의 내습성 시험 |
온습도: - 70 ℃~ 175 ℃ (95 % R.H.) |
소재지 |
| KS C IEC 60092-504:2001 |
선박용 전기설비 - 제504부：특별사항 - 제어 및 사용
[제외항목]
13 정전기 방전
14 전자기장
15 전도된 낫은 주파수
16 전도된 무선 주파수
17 과열/고속 과도현상
18 서지/쇼 과도현상
19 방사된 방출
20 전도된 방출
21 화염 지연(케이블) |
전압: (0 ~ 300) V
시간: (30 ~ 60) s
고온: (55 ~ 70) ℃
온습도: 40 ℃, 95 % R.H.
저온: (-25 ~ -15) ℃
진동주파수: (2 ~ 100) Hz
진동가속도: 7 m/s²
살수: 100 L/min
프로브: 80 mm
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| KS C IEC 60255-21-1:1988 |
전기계전기 제21 - 1부: 보호 계전기와 보호 기기의 진동,충격,충돌,지진 시험 - 진동 시험 용어 |
진동주파수: (10 ~ 150) Hz
충격가속도: (0.5 ~ 2.0) g |
소재지 |
| KS C IEC 60255-21-2:1988 |
전기릴레이 제21 - 2부: 보호계전기와 보호 기기의 진동,충격,충돌,지진 시험 지진 시험 |
충격가속도: (5 ~ 30) g |
소재지 |
| KS C IEC 60529:2013 |
외함의 밀폐 보호등급 구분(IP코드) |
오실레이터: (400 ~ 2 000) mm
노즐: (6.3 ~ 12.5) mm
살수: (0.07 ~ 100) L/min
프로브 지름, 길이: (1 ~ 50) mm, (80 ~ 100) mm |
소재지 |
| KS C IEC 60571:2012 |
철도 차량용 전자기기의 개별 요구사항
[제외항목]
12.2.7 공급 과전압
12.2.8 서지 (Surge), 정전기 방전 (ESD) 및 과도 버스트 민감성 시험
12.2.9 무선 주파수 시험
12.2.12 진동, 충격 및 충돌 시험(1 000 m/s²)
12.2.14 장비 응력 스크리닝 |
온도: (-40 ~ 85) ℃
진동주파수: (2 ~ 500) Hz
온습도: (25 ~ 55) ℃, (80 ~ 95) % R.H.
절연저항: (0 ~ 4 500) MΩ
진동가속도: (0.37 ~ 300) m/s²
충격가속도: (30 ~ 50) m/s²
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| KS C IEC 60601-1-11:2020 |
의료용 전기 기기 - 제1-11부: 기본 안전 및 필수 성능에 대한 일반 요구사항 - 부가 표준: 홈헬스케어 환경에서 사용되는 의료용 전기 기기와 의료용 전기 시스템에 대한 요구사항
[제외항목]
10.1.2 * 비 이동 작동형 의료용 전기기기(ME기기)에 대한 기계적 강도에 대한 요구사항
(1 000 m/s²) |
진동주파수: (10 ~ 2 000) Hz
충격가속도: (0.5 ~ 300) m/s² |
소재지 |
| KS C IEC 60664-1:2020 |
저압 기기의 절연협조 - 제1부 : 원칙, 요구사항, 시험 및 내전압 |
Vac : 5 000 V 이하
Vdc : 1 000 V 이하 |
소재지 |
| KS C IEC 61373:2010 |
철도 적용 - 철도차량 장치 - 충격 및 진동시험
[제외항목]
10. 충격 시험 조건
(1 000 m/s²) |
진동주파수: (1 ~ 500) Hz
진동가속도: (0.37 ~ 300) m/s²
충격가속도: (10 ~ 500) m/s² |
소재지 |
| KS C IEC 62262:2021 |
외부 기계적 충격에 대한 전기기기용 외함의 보호등급 (IK 코드) |
충격에너지: (0.2 ~ 50) J |
소재지 |
| KS R 1034:2023 |
자동차 부품 진동 시험 방법 |
진동주파수: (5 ~ 2 000) Hz
진동가속도: (4.90 ~ 44.1) m/s² |
소재지 |
| KS R 9144:2021 |
철도차량 부품의 진동시험방법 |
진동주파수: (1 ~ 70) Hz
진동가속도: (4.90 ~ 481) m/s² |
소재지 |
| KS R 9186:2021 |
철도신호보안 부품 진동시험 방법
[제외항목]
9.2 진동기능시험
(981 m/s² ~ 1 970 m/s²) |
진동주파수: (10 ~ 1 000) Hz
진동가속도: (4.90 ~ 316) m/s² |
소재지 |
| KS R 9187:2021 |
철도신호 보안부품 - 충격 시험방법
[제외항목]
4종,5종 |
충격가속도 : (98.1 ~500) m/s² |
소재지 |
| KS R 9193:2022 |
철도신호 보안부품의 절연 저항 및 내전압 시험 방법 |
Max. AC 5 000 V,
DC 1 000 V,
DC 500 V |
소재지 |
| KS R 9197:2022 |
철도차량의 절연저항 및 내전압 시험방법 |
Max. AC 5 000 V,
DC 1 000 V,
DC 500 V |
소재지 |
| KS X IEC 60945:2002 |
해상 항해 및 무선 통신 기기와 시스템 - 일반요구사항 : 시험방법과 요구되는 시험결과
7.1 : 과도전원공급
7.2 : 과도 조건
7.3 : 전원공급의 단시간 변동
7.4 : 전원 공급 상실
8.1 : 일반
8.2 : 건조 고온
8.3 : 온습도
8.4 : 저온
8.7 : 진동
8.8 : 비와 살수(노출용 장비)
8.12: 부식(염수 분무)(모든 분류의 장비)
12.1 : 위험한 전압에의 부주의한 접촉에 대한 보호
[제외항목]
8.5 열 충격(휴대용 장비)
8.6 낙하(휴대용 장비)
8.9 침수
8.10 태양열 방사(휴대용 장비)
8.11 오일 저항(휴대용 장비)
9. 전자파 방출 - 시험 방법 및 요구되는 시험 결과
10. 전자파 환경의 내성 - 시험 방법 및 요구되는 시험 결과
11. 특별한 목적의 시험 - 시험 방법 및 요구되는 시험 결과
12.2 전자계 무선 주파수 방사
12.3 디스플레이 유닛(VDU)으로부터 에너지 방출
12.4 X선 방사 |
전압: (0 ~ 300) V
시간: (30 ~ 60) s
고온: (55 ~ 70) ℃
온습도: 40 ℃, 95 % R.H.
저온: (-25 ~ -15) ℃
진동주파수: (2 ~ 100) Hz
진동가속도: 7 m/s²
살수: 100 L/min
프로브: 80 mm
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| Lloyd's Register Type Approval System Test Specification Number 1:2024 |
Performance and Environmental Test Specification for the following Environmentally Tested Products used in Marine Applications:
- Electrical Equipment
- Control and Monitoring Equipment
- Instrumentation and Internal
Communication Equipment
- Programmable Electronic Systems
[Exception]
6. Pressure Test
8.3 Hydraulic or pneumatic supplies
21. Electromagnetic immunity tests for equipment incorporating active electronic components
22. Immunity to conducted low frequency interference
23. Immunity to conducted radio interference
24. Immunity to radiated radio frequency fields
25. Immunity to fast low-energy transients (bursts)
26. Immunity to slow high-energy transients (surges)
27. Immunity to electrostatic discharge (ESD)
28. Electromagnetic emission tests for equipment incorporating active electronic components
29. Radiated emissions
30. Conducted emissions
31. Examination of software for type approval of products that include programmable electronic systems
32. Additional tests |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| MIL-STD-167-1A:2005 |
DEPARTMENT OF DEFENSE
TEST METHOD STANDARD
Mechanical Vibrations of Shipboard Equipment
(TYPE 1 - ENVIRONMENTAL) |
진동주파수: (4 ~ 33) Hz |
소재지 |
| MIL-STD-202G:2002 |
DEPARTMENT OF DEFENSE
Test Method Standard
Electronic and electrical Component Parts
Method 103B HUMIDITY(STEADY STATE)
Method 106G MOISTURE RESISTANCE
Method 107G THERMAL SHOCK TABLE 107 - I
Method 201A VIBRATION
Method 204A VIBRATION, HIGH FREQUENCY
Method 214A RANDOM VIBRATION |
온습도: (15 ∼ 40) ℃,
(25 ∼ 95) % R.H. 내습: (-10 ∼ 70) ℃,
(25 ∼ 98) % R.H.
열충격: (-70 ∼ 150) ℃
진동주파수: (10 ∼ 55) Hz
진동주파수:
(5 ∼ 2 000) Hz
랜덤진동주파수:
(50 ∼ 2 000) Hz
충격가속도:
(9.8 ~ 88) m/s²
진동주파수: (1 ~ 70) Hz
진동가속도:
(4.90 ~ 481) m/s²
진동주파수:
(10 ~ 1 000) Hz
진동가속도:
(4.90 ~ 316) m/s²
진동주파수:
(5 ~ 2 000) Hz
진동가속도:
(4.90 ~ 44.1) m/s²
충격가속도:
(50 ~ 500) m/s²
충격가속도:
(100 ~ 400) m/s²
진동주파수:
(10 ~ 2 000) Hz
충격가속도:
(0.5 ~ 300) m/s²
온도: (35 ~ 100) ℃
진동주파수:
(1 ~ 2 000) Hz
진동가속도:
(1 ~ 500) m/s²
온도: (-65 ~ 200) ℃ |
소재지 |
| MIL-STD-202H:2015 |
DEPARTMENT OF DEFENSE
Test Method Standard
Electronic and electrical Component Parts
Method 103 HUMIDITY(STEADY STATE)
Method 106 MOISTURE RESISTANCE
Method 107 THERMAL SHOCK TABLE 107 - I
Method 201 VIBRATION
Method 204 VIBRATION, HIGH FREQUENCY
Method 214 RANDOM VIBRATION |
온습도: (15 ∼ 40) ℃,
(25 ∼ 95) % R.H. 내습: (-10 ∼ 70) ℃,
(25 ∼ 98) % R.H.
열충격: (-70 ∼ 150) ℃
진동주파수: (10 ∼ 55) Hz
진동주파수:
(5 ∼ 2 000) Hz
랜덤진동주파수:
(50 ∼ 2 000) Hz
충격가속도:
(9.8 ~ 88) m/s²
진동주파수: (1 ~ 70) Hz
진동가속도:
(4.90 ~ 481) m/s²
진동주파수:
(10 ~ 1 000) Hz
진동가속도:
(4.90 ~ 316) m/s²
진동주파수:
(5 ~ 2 000) Hz
진동가속도:
(4.90 ~ 44.1) m/s²
충격가속도:
(50 ~ 500) m/s²
충격가속도:
(100 ~ 400) m/s²
진동주파수:
(10 ~ 2 000) Hz
충격가속도:
(0.5 ~ 300) m/s²
온도: (35 ~ 100) ℃
진동주파수:
(1 ~ 2 000) Hz
진동가속도:
(1 ~ 500) m/s²
온도: (-65 ~ 200) ℃ |
소재지 |
| MIL-STD-810F:2000 |
DEPARTMENT OF DEFENSE
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.4 High temperature Method
502.4 Low temperature Method
503.4 Temperature Shock Method
507.4 Humidity. Method
514.5 Vibration [Exception] Category 5 - Truck/Trailer/Tracked - Loose Cargo Category 6 - Truck/Trailer/Tracked - Large Assembly Cargo
516.5 Shock [Exception] Procedure Ⅶ - Rail Impact Procedure Ⅷ - Catapult Launch/Arrested Landing |
고온: (30 ~ 71) ℃
저온: (-61 ~ -6) ℃
열충격: (-61 ~ 71) ℃
온습도: (20 ~ 60) ℃, (85 ~ 95) % R.H.
진동주파수: (1 ~ 2 000) Hz
충격가속도: (98 ~ 735) m/s² |
소재지 |
| MIL-STD-810F:2003 |
DEPARTMENT OF DEFENSE
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.4 High temperature Method
502.4 Low temperature Method
503.4 Temperature Shock Method
507.4 Humidity. Method
514.5 Vibration
[Exception]
Category 5
- Truck/Trailer/Tracked - Loose Cargo
Category 6
- Truck/Trailer/Tracked - Large Assembly Cargo516.5 Shock
[Exception]
Procedure Ⅶ
- Rail Impact
Procedure Ⅷ
- Catapult Launch/Arrested Landing |
고온: (30 ~ 71) ℃
저온: (-61 ~ -6) ℃
열충격: (-61 ~ 71) ℃
온습도: (20 ~ 60) ℃, (85 ~ 95) % R.H.
진동주파수: (1 ~ 2 000) Hz
충격가속도: (98 ~ 735) m/s² |
소재지 |
| MIL-STD-810G:2008 |
DEPARTMENT OF DEFENSE
Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
501.5 High temperature Method
502.5 Low temperature Method
503.5 Temperature Shock Method
507.5 Humidity Method
514.6 Vibration
[Exception] Category5
- Truck/Trailer/Tracked - Loose Cargo Category6
- Truck/Trailer/Tracked - Large Assembly Cargo 516.6 Shock
[Exception]
Procedure Ⅶ - Pendulum Impact Procedure Ⅷ - Catapult Launch/Arrested Landing |
온도: (-61 ~ 100) ℃
온습도: (20 ~ 60) ℃, (85 ~ 95) % R.H.
진동주파수: (1 ~ 2 000) Hz
충격가속도: (98 ~ 735) m/s² |
소재지 |
| MIL-STD-810G:2014 |
DEPARTMENT OF DEFENSE
Test Method Standard for Environmental
Engineering Considerations and Laboratory
Tests
501.6 High temperature Method
502.6 Low temperature Method
503.6 Temperature Shock Method
507.6 Humidity Method
514.7 Vibration [Exception] Category5
- Truck/Trailer/Tracked - Loose Cargo Category6
- Truck/Trailer/Tracked - Large Assembly Cargo
516.7 Shock [Exception] Procedure
Ⅶ - Pendulum Impact Procedure Ⅷ - Catapult Launch/Arrested Landing |
온도: (-61 ~ 100) ℃
온습도: (20 ~ 60) ℃, (85 ~ 95) % R.H.
진동주파수: (1 ~ 2 000) Hz
충격가속도: (98 ~ 735) m/s² |
소재지 |
| MIL-STD-810H:2019 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD Environmental Engineering Considerations and Laboratory Tests
501.7 High temperature Method
502.7 Low temperature Method
503.7 Temperature Shock Method
507.6 Humidity Method
514.8 Vibration
516.8 Shock
528.1 Mechanical Vibrations of Shipboard Materiel
(Type I – Environmental)
[Exception]
514.8 Vibration
Category5
- Truck/Trailer/Tracked - Loose Cargo
Category6
- Truck/Trailer/Tracked - Large Assembly Cargo
516.8 Shock
Procedure Ⅶ - Pendulum Impact
Procedure Ⅷ – Catapult Launch/Arrested Landing |
온도: (-61 ~ 100) ℃
온습도: (20 ~ 60) ℃, (85 ~ 95) % R.H.
진동주파수: (1 ~ 2 000) Hz
충격가속도: (98 ~ 735) m/s² |
소재지 |
| MIL-STD-810H w/Change 1:2022 |
DEPARTMENT OF DEFENSE TEST METHOD STANDARD Environmental Engineering Considerations and Laboratory Tests
501.7 High temperature Method
502.7 Low temperature Method
503.7 Temperature Shock Method
507.6 Humidity Method
514.8 Vibration
516.8 Shock
528.1 Mechanical Vibrations of Shipboard Materiel
(Type I – Environmental)
[Exception]
514.8 Vibration
Category5
- Truck/Trailer/Tracked - Loose Cargo
Category6
- Truck/Trailer/Tracked - Large Assembly Cargo
516.8 Shock
Procedure Ⅶ - Pendulum Impact
Procedure Ⅷ – Catapult Launch/Arrested Landing |
온도: (-61 ~ 100) ℃
온습도: (20 ~ 60) ℃, (85 ~ 95) % R.H.
진동주파수: (1 ~ 2 000) Hz
충격가속도: (98 ~ 735) m/s² |
소재지 |
| NK:2026 |
Guidance for the Approval and Type Approval of Materials and Equipment for Marine use Part 7 Control and Instrumentation Equipment and Electrical Installations Chapter 1 Approval of use of automatic devices and equipment
[Exception]
Power supply fluctuation test
Pressure test
Electrostatic discharge immunity test
Radiated radio frequency immunity test
Conducted low frequency immunity test
Conducted high frequency immunity test
Electrical burst/fast transient immunity test
Surge immunity test
Radiated emission test
Conducted emission test
Flame retardant test |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
| RINA:2026 |
Rules for the Classification of Ships (2022) Part C Machinery, Systems and Fire Protection Chapter 3 Automation Section 6 Testing
[Exception]
No. 4b : Pneumatic and hydraulic
No. 13 : Electrostatic discharge
No. 14 : Electromagnetic field
No. 15 : Conducted low frequency
No. 16 : Conducted Radio Frequency
No. 17 : Electrical Fast Transients / Burst
No. 18 : Surge
No. 19 : Radiated Emission
No. 20 : Conducted Emission
No. 21 : Flame retardant |
전압: (0 ~ 300) V
온도: (-25 ~ 70) ℃
온습도: (20 ~ 55) ℃, (80 ~ 95) % R.H.
진동주파수: (2 ~ 100) Hz
진동가속도: (0.7 ~ 4.0) g
절연저항: (0 ~ 4 500) MΩ
내전압: (0 ~ 3 000) V
염도: 5 %
염용액: (15 ~ 35) ℃ |
소재지 |
