| ▶ 계측기기 |
| EN 61010-1:2010 /A1:2019 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 1: General requirements
(Exception)
11.6 Equipment rated with a degree of ingress protection (IP code)
11.7 Fluid pressure and leakage
12.3 Optical radiation
12.4 Microwave radiation
12.5.2 Ultrasonic pressure
12.6 Laser sources
13.2.3 Implosion of cathode ray tubes
Annex H Qualification of conformal coatings for protection against POLLUTION |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 50332-1:2013 |
Sound system equipment: Headphones and earphones associated with personal music players – Maximum sound pressure level measurement methodology –
Part 1: General method for “one package equipment” |
Frequency range: 100 ㎐ ~ 10 ㎑
Output voltage: (20 ~ 200) ㎷ |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI C63.10 - 2013 |
American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1:2006 |
Medical electrical equipment –
Part 1: General requirement for basic safety and essential performance
(Exception)
8.8.4.2 Resistance to environmental stress
9.5.2 Cathode ray tubes
9.6 Acoustic energy (including infra- and ultrasound) and vibration
10.4 Lasers and light emitting diodes (LEDs)
11.2.2 ME equipment and ME systems used in conjunction with oxygen rich environments
11.2.3 Single fault conditions related to oxygen rich environments in conjunction with ME equipment and ME systems
11.4 ME equipment and ME systems intended for use with flammable anaesthetics
11.7 Biocompatibility of ME equipment and ME systems
13.2.11 Failures of components in ME equipment used in conjunction with oxygen rich environments 15.4.2 Temperature and overload control devices 15.4.3.4 Lithium batteries
Annex G Protection against hazarous of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ANSI C63.4:2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 ㎑ to 40 ㎓ |
9 ㎑~ 40 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| EN 18031-1:2024 |
Common security requirements for radio equipment –
Part 1: Internet connected radio equipment |
– |
소재지 |
| ▶ 에너지효율 |
| 10 CFR Part 430, Subpart B, Appendix A |
Uniform Test Method for Measuring the Energy Consumption of Refrigerators, Refrigerator-Freezers, and Miscellaneous Refrigeration Products |
Under 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60068-2-1:2007 |
Environmental testing –
Part 2-1: Tests – Test A: Cold
(Exception)
5.3 Test Ad
5.4 Test Ae |
Temperature: (-40 ~ 5) ℃ |
소재지 |
| ▶ 계측기기 |
| EN IEC 61010-2-010:2020 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-010: Particular requirements for laboratory equipment for the heating of material |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 50332-2:2013 |
Sound system equipment: Headphones and earphones associated with personal music players – Maximum sound pressure level measurement methodology –
Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design |
Frequency range: 100 ㎐ ~ 10 ㎑
Output voltage: (20 ~ 200) ㎷ |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI C63.26 - 2015 |
American National Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1:2006 +A1:2013 |
Medical electrical equipment –
Part 1: General requirement for basic safety and essential performance
(Exception)
8.8.4.2 Resistance to environmental stress
9.5.2 Cathode ray tubes
9.6 Acoustic energy (including infra- and ultrasound) and vibration
10.4 Lasers and light emitting diodes (LEDs)
11.2.2 ME equipment and ME systems used in conjunction with oxygen rich environments
11.2.3 Single fault conditions related to oxygen rich environments in conjunction with ME equipment and ME systems
11.4 ME equipment and ME systems intended for use with flammable anaesthetics
11.7 Biocompatibility of ME equipment and ME systems
13.2.11 Failures of components in ME equipment used in conjunction with oxygen rich environments 15.4.2 Temperature and overload control devices 15.4.3.4 Lithium batteries
Annex G Protection against hazarous of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ANSI C63.4a:2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 ㎑ to 40 ㎓ |
9 ㎑~ 40 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| EN 18031-2:2024 |
Common security requirements for radio equipment –
Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment |
– |
소재지 |
| ▶ 에너지효율 |
| 10 CFR Part 430, Subpart B, Appendix H |
Uniform Test Method for Measuring the Power Consumption of Television Sets |
(0 ~ 5) kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60068-2-2:2007 |
Environmental testing –
Part 2-2: Tests – Test B: Dry heat
(Exception)
5.3 Test Bd
5.4 Test Be |
Temperature: (30 ~ 125) ℃ |
소재지 |
| ▶ 계측기기 |
| EN IEC 61010-2-040:2021 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
(Exception)
7.105 Pressure-retaining parts of a door
13 Protection against liberated gases, substances, explosion and implosion |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 50332-3:2017 |
Sound system equipment: headphones and earphones associated with personal music players – maximum sound pressure level measurement methodology –
Part 3: measurement method for sound dose management |
Frequency range: 100 ㎐ ~ 10 ㎑
Output voltage: (20 ~ 200) ㎷ |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI C63.4 - 2014 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1:2006 +A1:2013 +A2:2021 |
Medical electrical equipment –
Part 1: General requirement for basic safety and essential performance
(Exception)
8.8.4.2 Resistance to environmental stress
9.5.2 Cathode ray tubes
9.6 Acoustic energy (including infra- and ultrasound) and vibration
10.4 Lasers and light emitting diodes (LEDs)
11.2.2 ME equipment and ME systems used in conjunction with oxygen rich environments
11.2.3 Single fault conditions related to oxygen rich environments in conjunction with ME equipment and ME systems
11.4 ME equipment and ME systems intended for use with flammable anaesthetics
11.7 Biocompatibility of ME equipment and ME systems
13.2.11 Failures of components in ME equipment used in conjunction with oxygen rich environments 15.4.2 Temperature and overload control devices 15.4.3.4 Lithium batteries
Annex G Protection against hazarous of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS CISPR 11:2017 +AMD1:2020 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
7.6.7 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| EN 18031-3:2024 |
Common security requirements for radio equipment –
Part 3: Internet connected radio equipment processing virtual money or monetary value |
– |
소재지 |
| ▶ 에너지효율 |
| 10 CFR Part 430, Subpart B, Appendix Y1 |
Uniform Test Method for Measuring the Energy Consumption of Battery Chargers |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60068-2-30:2005 |
Environmental testing –
Part 2-30: Tests – Test Db: Damp heat, cyclic(12 h + 12 h cycle) |
Temperature: (25 ~ 55) ℃ Humidity: (60 ~ 97) % R.H. |
소재지 |
| ▶ 계측기기 |
| EN IEC 61010-2-081:2020 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purpose |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-1:2012 +A11:2014 +A13:2017 |
Household and similar electrical appliances – Safety –
Part 1: General requirements
(Exception)
19.11.4.6 IEC 61000-4-34
22.16 Automatic cord reels test
22.32 Oxigen bomb test
22.46 Software evaluation test
22.48 IEC 61770 test
24.1.1 Capacitor test (IEC 60384-14)
24.1.2 Transformer test (IEC 61558-2-6)
24.1.3 Switch test (IEC 61058-1)
24.1.4 Automatic control for 6.10 and 6.11 of IEC 60730-1
24.1.7 Telecommunication interface test (IEC 62151)
24.1.8 Thermal fuse test (IEC 60691)
24.1.9 Relay for clause 17 of IEC 60730-1
24.4 Terminal device for heating elements (IEC/TR 60083 or IEC 60906-1, IEC 60320-1)
24.7 Hose set (IEC 61770)
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI C63.4a - 2017 |
American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz
Amendment 1: Test Site Validation |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-10:2008 |
Medical electrical equipment –
Part 1-10: General requirements for basic safety and essential performance – Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
1. Temperature: max. 200 ℃
2. Humidity: max. 95 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| AS CISPR 11:2017 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
7.6.7 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| ETSI EN 303 645 V2.1.1 |
CYBER; Cyber Security for Consumer Internet of Things: Baseline Requirements |
– |
소재지 |
| ▶ 에너지효율 |
| 10 CFR Part 430, Subpart B, Appendix Z |
Uniform Test Method for Measuring the Energy Consumption of External Power Supplies |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60068-2-75:2014 |
Environmental testing –
Part 2-75: Tests – Test Eh: Hammer tests
(Exception)
5. Test Eha: Pendulum hammer |
(0.5 ~ 5) J |
소재지 |
| ▶ 계측기기 |
| EN IEC 61010-2-101:2022 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-101: Particular requirements in vitro diagnostic (IVD) medical equipment |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-1:2012 +A11:2014 +A13:2017 +A1:2019 +A14:2019 +A2:2019 |
Household and similar electrical appliances – Safety –
Part 1: General requirements
(Exception)
19.11.4.6 IEC 61000-4-34
22.16 Automatic cord reels test
22.32 Oxigen bomb test
22.46 Software evaluation test
22.48 IEC 61770 test
24.1.1 Capacitor test (IEC 60384-14)
24.1.2 Transformer test (IEC 61558-2-6)
24.1.3 Switch test (IEC 61058-1)
24.1.4 Automatic control for 6.10 and 6.11 of IEC 60730-1
24.1.7 Telecommunication interface test (IEC 62151)
24.1.8 Thermal fuse test (IEC 60691)
24.1.9 Relay for clause 17 of IEC 60730-1
24.4 Terminal device for heating elements (IEC/TR 60083 or IEC 60906-1, IEC 60320-1)
24.7 Hose set (IEC 61770)
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI C63.5 - 2017 |
American National Standard for Electromagnetic Compatibility – Radiated Emission Measurements in Electromagnetic Interference (EMI) Control – Calibration and Qualification of Antennas (9 kHz to 40 GHz) |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-10:2008 +A1:2015 |
Medical electrical equipment –
Part 1-10: General requirements for basic safety and essential performance – Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
1. Temperature: max. 200 ℃
2. Humidity: max. 95 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| AS CISPR 14.1:2018 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus
Part 1: Emission (CISPR 14-1:2016 (ED 6.0), MOD)
(Exception)
7.3.7.2 Electric fence supply units |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 소프트웨어 |
| ETSI EN 303 645 V3.1.3 |
CYBER; Cyber Security for Consumer Internet of Things: Baseline Requirements |
– |
소재지 |
| ▶ 에너지효율 |
| AHRI STANDARD 210/240-2017 |
Performance rating of unitary airconditioning and air-source heat pump equipment |
(window type only)
Cooling capacity less than 11 kW,
air-flowrate (max) 40 m3/min |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60068-2-78:2013 |
Environmental testing –
Part 2-78: Tests – Test Cab: Damp heat, steady state |
30 ℃, 93 % R.H.
30 ℃, 85 % R.H.
40 ℃, 93 % R.H.
40 ℃, 85 % R.H. |
소재지 |
| ▶ 계측기기 |
| IEC 61010-1:2010 +AMD1:2016 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 1: General requirements
(Exception)
11.6 Equipment rated with a degree of ingress protection (IP code)
11.7 Fluid pressure and leakage
12.3 Optical radiation
12.4 Microwave radiation
12.5.2 Ultrasonic pressure
12.6 Laser sources
13.2.3 Implosion of cathode ray tubes
Annex H Qualification of conformal coatings for protection against POLLUTION |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-15:2016 +A11:2018 +A12:2021 +A1:2021 +A2:2021 |
Household and similar electrical appliances – Safety –
Part 2-15: Particular requirements for appliances for heating liquids
(Exception)
22.103 Cordless appliance test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI/TIA - 603 - E (2016) |
Land Mobile FM or PM Communications Equipment Measurement and Performance Standards |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-10:2008 +A1:2015 +A2:2021 |
Medical electrical equipment –
Part 1-10: General requirements for basic safety and essential performance – Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
1. Temperature: max. 200 ℃
2. Humidity: max. 95 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS 61000.6.3:2012 |
ElectroMagnetic Compatibility(EMC) –
Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 소프트웨어 |
| IEC 60335-1:2020 |
Household and similar electrical appliances – Safety –
Part 1: General requirements
Annex R
Annex U |
– |
소재지 |
| ▶ 에너지효율 |
| AS/NZS IEC 62552.1:2018 |
Household refrigerating appliances – Characteristics and test methods,
Part 1: General requirements |
Less than 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60529:1991 /A1:2000 /A2:2013 |
Degrees of protection provided by enclosures (IP Code)
(Exception)
14.2.9 Test for second characteristic numeral 9 by high pressure and temperature water jetting |
IP1X, IP2X, IP3X, IP4X, IP5X, IP6X
IPX1, IPX2, IPX3, IPX4,
IPX5, IPX6, IPX7, IPX8 |
소재지 |
| ▶ 계측기기 |
| IEC 61010-2-010:2019 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-010: Particular requirements for laboratory equipment for the heating of material |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-2:2010 +A11:2012 +A1:2013 |
Household and similar electrical appliances – Safety –
Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
(Exception)
21 Mechanical strength
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Test energy: max.5 J |
소재지 |
| ▶ 유/무선 통신기기 |
| ANSI/TIA-102.CAAA - E (2016) |
Digital C4FM/CQPSK Transceiver Measurement Methods |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-11:2015 |
Medical electrical equipment –
Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
8.3 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS- ingress of particulate matter
10.1.2 Requirements for mechanical strength for non-transit-operable ME equipment
10.1.3 Requirements for mechanical strength for transit-operable ME equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS 61000.6.3:2021 |
ElectroMagnetic Compatibility(EMC) –
Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 소프트웨어 |
| IEC 62443-4-1:2018 |
Security for industrial automation and control systems –
Part 4-1: Secure product development lifecycle requirements |
– |
소재지 |
| ▶ 에너지효율 |
| AS/NZS IEC 62552.2:2018 |
Household refrigerating appliances – Characteristics and test methods,
Part 2: Performance requirements. |
Less than 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 60695-10-2:2014 |
Fire hazard testing- Part 10-2: Abnormal heat – Ball pressure test method |
Max. 150 ℃, (20 ± 0.2) N |
소재지 |
| ▶ 계측기기 |
| IEC 61010-2-040:2020 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
(Exception)
Cl.7.105: Pressure-retaining parts of a door
Cl.13: Protection against liberated gases, substances, explosion and implosion |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-21:2003 +A1:2005 +A2:2008 |
Household and similar electrical appliances – Safety –
Part 2-21: Particular requirements for storage water heaters
(Exception)
24.102.1 Thermostat operated test
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| AS/NZS 4268:2012 /Amdt 1:2013 |
Radio equipment and systems – Short range devices – Limits and methods of measurement |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-11:2015 +A1:2021 |
Medical electrical equipment –
Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
8.3 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS- ingress of particulate matter
10.1.2 Requirements for mechanical strength for non-transit-operable ME equipment
10.1.3 Requirements for mechanical strength for transit-operable ME equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 11:2011 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
7.6.8 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| IEC 62443-4-2:2019 |
Security for industrial automation and control systems –
Part 4-2: Technical security requirements for IACS components |
– |
소재지 |
| ▶ 에너지효율 |
| AS/NZS IEC 62552.3:2018 |
Household refrigerating appliances – Characteristics and test methods,
Part 3: Energy consumption and volume. |
Less than 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN 62262:2002 /A1:2021 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
(Exception)
7. Pendulum hammer |
IK04, IK06, IK07, IK08 |
소재지 |
| ▶ 계측기기 |
| IEC 61010-2-081:2019 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purpose |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-24:2010 |
Household and similar electrical appliances – Safety –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
(Exception)
22.108 Test apparatus for Flammable refrigerants (IEC 60079-15)
Annex CC Non-sparking “n” electrical apparatus and test conditions for “dc” devices |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| AS/NZS 4268:2017 |
Radio equipment and systems – Short range devices – Limits and methods of measurement |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-12:2015 |
Medical electrical equipment –
Part 1-12: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
(Exception)
8.1.1 Ingress of water or particulate matter into ME EQUIPMENT - ingress of particulate matter
8.1.2 Ingress of water or particulate matter into ME SYSTEMS - ingress of particulate matter
10.1.2 Requirements for mechanical strength for FIXED or PERMANENTLY INSTALLED ME EQUIPMENT intended for use in a road ambulance
10.1.3 Requirements for mechanical strength for TRANSPORTABLE ME EQUIPMENT
10.1.4 Requirements for mechanical strength for ME EQUIPMENT intended for airborne use |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 11:2024 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| IEC 81001-5-1:2021 |
Health software and health IT systems safety, effectiveness and security –
Part 5-1: Security - Activities in the product life cycle |
– |
소재지 |
| ▶ 에너지효율 |
| CAN/CSA-C300-08 |
Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and wine chillers |
Under 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN IEC 60068-2-14:2023 |
Environmental testing –
Part 2-14: Tests – Test N: Change of temperature
(Exception)
8. Test Nb
9. Test Nc |
Temperature: (-40 ~ 125) ℃, |
소재지 |
| ▶ 계측기기 |
| IEC 61010-2-101:2018 |
Safety requirements for electrical equipment for measurement, control, and laboratory use –
Part 2-101: Particular requirements in vitro diagnostic (IVD) medical equipment |
1. Test voltage:
- 1 phase: max. 300 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-24:2010 +A1:2019 +A2:2019 +A11:2020 |
Household and similar electrical appliances – Safety –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
(Exception)
22.108 Test apparatus for Flammable refrigerants (IEC 60079-15)
Annex CC Non-sparking “n” electrical apparatus and test conditions for “dc” devices |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 303 417 (V1.1.0, 2016.12) |
Wireless power transmission using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-12:2015 +A1:2020 |
Medical electrical equipment –
Part 1-12: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
(Exception)
8.1.1 Ingress of water or particulate matter into ME EQUIPMENT - ingress of particulate matter
8.1.2 Ingress of water or particulate matter into ME SYSTEMS - ingress of particulate matter
10.1.2 Requirements for mechanical strength for FIXED or PERMANENTLY INSTALLED ME EQUIPMENT intended for use in a road ambulance
10.1.3 Requirements for mechanical strength for TRANSPORTABLE ME EQUIPMENT
10.1.4 Requirements for mechanical strength for ME EQUIPMENT intended for airborne use |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 13:2012 |
Sound and television broadcast receivers and associated equipment –
Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 2 150 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
ERP: 0.9 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 소프트웨어 |
| ISO/IEC 25023:2016 |
Systems and software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Measurement of system and software product quality
8.2 Functional suitability measures
8.3 Performance efficiency measures
8.4 Compatibility measures
8.5 Usability measures
8.6 Reliability measures
8.7 Security measures
8.8 Maintainability measures
8.9 Portability measures |
– |
소재지 |
| ▶ 에너지효율 |
| CAN/CSA-C300-15 |
Energy performance and capacity of household refrigerators, refrigerator-freezers, freezers, and wine chillers |
Under 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| EN IEC 60068-2-38:2021 |
Environmental testing –
Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test |
Temperature: (-10 ~ 65) ℃
Humidity: (80 ~ 95) % R.H. |
소재지 |
| ▶ 계측기기 |
| KS C IEC 61010-1:2010 |
측정, 제어 및 실험실용 전기 장비의 안전 요구사항 –
제1부: 일반 요구사항
(제외항목)
11.6 특별히 보호된 장비
11.7 유체 압력 및 누출
12.3 자외선(UV) 방사
12.4 전자파
12.5.2 초음파 압력
12.6 레이저광원
13.2.3 음극선관의 폭발
부속서 H 오염 방지를 위한 등각 코팅의 자격 |
1. 시험전압:
- 단상: max. 300 Vac
2. 전류: max. 30 A
3. 주파수: max. 65 ㎐
4. 온도: max. 200 ℃
5. 절연저항: max. 999.9 ㏁
6. 토오크: max. 8 N·m
7. 습도: max. 95 % R.H.
8. 질량: max. 100 ㎏
9. 내전압: max. 10 ㎸
10. 누설전류: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-29:2004 +A2:2010 +A11:2018 |
Household and similar electrical appliances – Safety –
Part 2-29: Particular requirements for battery chargers
(Exception)
21.102 Vibration tests |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 303 417 (V1.1.1, 2017.09) |
Wireless power transmission using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, 79 - 90 kHz, 100 - 300 kHz, 6 765 - 6 795 kHz ranges;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-3:2008 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 14.1:2013 |
Electromagnetic Compatibility –
Requirements for household appliances, electrical tools and similar apparatus –
Part 1: Emission
(Exception)
7.3.7.2 Electric fence supply units |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 소프트웨어 |
| ISO/IEC 25051:2014 |
Software engineering – Systems and software Quality Requirements and Evaluation (SQuaRE) – Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
5.1 Requirements for product description
5.2 Requirements for user documentation
5.3 Quality requirements for software |
– |
소재지 |
| ▶ 에너지효율 |
| CSA C381.1-08 |
Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-1:2007 |
Environmental testing –
Part 2-1: Tests – Test A: Cold
(Exception)
5.3 Test Ad
5.4 Test Ae |
Temperature: (-40 ~ 5) ℃ |
소재지 |
| ▶ 계측기기 |
| KS C IEC 61010-2-010:2014 |
측정, 제어 및 실험실용 전기 장비의 안전 요구사항 –
제2-010부: 재료 가열을 위한 실험실용 장비의 개별 요구사항 |
1. 시험전압:
- 단상: max. 300 Vac
2. 전류: max. 30 A
3. 주파수: max. 65 ㎐
4. 온도: max. 200 ℃
5. 절연저항: max. 999.9 ㏁
6. 토오크: max. 8 N·m
7. 습도: max. 95 % R.H.
8. 질량: max. 100 ㎏
9. 내전압: max. 10 ㎸
10. 누설전류: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-40:2003 +A11:2004 +A12:2005 +A1:2006 +A2:2009 +A13:2012 |
Household and similar electrical appliances – Safety –
Part 2-40: Particular requirements for Electrical heat pumps, air-conditioners and dehumidifiers
(Exception)
22.108 Vacuum pressure test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 50360:2017 |
Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear |
450 ㎒ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-3:2008 +A1:2013 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 14.1:2021 |
Electromagnetic Compatibility –
Requirements for household appliances, electrical tools and similar apparatus –
Part 1: Emission
(Exception)
7.3.7.2 Electric fence supply units |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 소프트웨어 |
| NISTIR 8259A:2020 |
IoT Device Cybersecurity Capability Core Baseline |
– |
소재지 |
| ▶ 에너지효율 |
| CSA C381.1-17 |
Test method for calculating the energy efficiency of single-voltage external ac-dc and ac-ac power supplies |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-14:2023 |
Environmental testing –
Part 2-14: Tests – Test N: Change of temperature
(Exception)
8. Test Nb
9. Test Nc |
Temperature: (-40 ~ 125) ℃ |
소재지 |
| ▶ 계측기기 |
| KS C IEC 61010-2-040:2015 |
측정, 제어 및 실험실용 전기 장비의 안전 요구사항 –
제2-040부: 의료용 재료 처리용 멸균기와 세정 소독기의 개별 요구사항
(제외항목)
7.105 도어의압력유지부품
13 방출가스, 물질, 폭발 및 파열에 대한 보호 |
1. 시험전압:
- 단상: max. 300 Vac
2. 전류: max. 30 A
3. 주파수: max. 65 ㎐
4. 온도: max. 200 ℃
5. 절연저항: max. 999.9 ㏁
6. 토오크: max. 8 N·m
7. 습도: max. 95 % R.H.
8. 질량: max. 100 ㎏
9. 내전압: max. 10 ㎸
10. 누설전류: max. 10 ㎃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-65:2003 +A1:2008 +A11:2012 +A12:2022 |
Household and similar electrical appliances – Safety –
Part 2-65: Particular requirements for air-cleaning appliances
(Exception)
32 Radiation, toxicity and similar hazards
Annex AA UV radiation test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 50566:2013 |
Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz) |
450 ㎒ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-3:2008 +A1:2013 +A11:2016 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 22:2009 +AMD1:2010 |
Information technology equipment –
Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 소프트웨어 |
| UL 2900-1:2023 |
Software Cybersecurity for Network-Connectable Products,
Part 1: General Requirements
SOFTWARE COMPOSITION
SOFTWARE VULNERABILITIES |
– |
소재지 |
| ▶ 에너지효율 |
| CSA C381.2-17 |
Energy performance of battery charging systems and uninterruptible power supplies |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-2:2007 |
Environmental testing –
Part 2-2: Tests – Test B: Dry heat
(Exception)
5.3 Test Bd
5.4 Test Be |
Temperature: (30 ~ 125) ℃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-80:2003 +A1:2004 +A2:2009 |
Household and similar electrical appliances – Safety –
Part 2-80: Particular requirements for fans |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 50566:2013 /AC:2014 |
Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz) |
450 ㎒ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-3:2008 +A1:2013 +A11:2016 +A2:2021 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment –
Emission requirements
(Exception)
30 ㎒~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| CSA C62301-11 |
Household electrical appliances - Measurement of standby power |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-30:2005 |
Environmental testing –
Part 2-30: Tests – Test Db: Damp heat, cyclic(12 h + 12 h cycle) |
Temperature: (25 ~ 55) ℃
Humidity: (60 ~ 97) % R.H. |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-88:2002 |
Household and similar electrical appliances – Safety –
Part 2-88: Particular requirements for Humidifiers intended for use with heating, ventilation or air-conditioning systems
(Exception)
22.7 Test for physical properties of gasket materials. |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 50566:2017 |
Product standard to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz) |
450 ㎒ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-6:2010 |
Medical electrical equipment –
Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| AS+NZS CISPR 32:2015 +AMD1:2020 |
Electromagnetic compatibility of multimedia equipment –
Emission requirements
(Exception)
30 ㎒~ 1 ㎓ FAR Measurement
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| DGNTI-COPANIT 506:2017 |
Energy efficiency of central, packaged and split-type air-conditioners. Limits and test methods |
Cooling capacity: Under 8 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-38:2021 |
Environmental testing –
Part 2-38: Tests – Test Z/AD: Composite temperature/humidity cyclic test |
Temperature: (-10 ~ 65) ℃
Humidity: (80 ~ 95) % R.H. |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-89:2010 +A1:2016 +A2:2017 |
Household and similar electrical appliances – Safety –
Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 50663:2017 |
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz) |
10 ㎒ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-6:2010 +A1:2015 |
Medical electrical equipment –
Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| CFR 47 Part 15 |
Telecommunication-radio frequency devices |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 40 ㎓ |
소재지 |
| ▶ 에너지효율 |
| DGNTI-COPANIT 511: 2017 |
Energy Efficiency. Refrigerators and Freezers Home Appliances - Limits and Test Methods |
Under 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-75:2014 |
Environmental testing –
Part 2-75: Tests – Test Eh: Hammer tests
(Exception)
5. Test Eha: Pendulum hammer |
(0.5 ~ 5) J |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-98:2003 +A1:2005 +A2:2008 |
Household and similar electrical appliances – Safety –
Part 2-98: Particular requirements for humidifiers |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 50665:2017 |
Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
0 ㎐ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-6:2010 +A1:2015 +A2:2021 |
Medical electrical equipment –
Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| CFR 47 Part 18 |
Telecommunication-Industrial, scientific and medical equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 에너지효율 |
| EN 14511-1:2022 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling -
Part 1: Terms, definitions and classification |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60068-2-78:2012 |
Environmental testing –
Part 2-78: Tests – Test Cab: Damp heat, steady state |
30 ℃, 93 % R.H.
30 ℃, 85 % R.H.
40 ℃, 93 % R.H.
40 ℃, 85 % R.H. |
소재지 |
| ▶ 가정용 전기기기 |
| EN 60335-2-98:2003 +A1:2005 +A2:2008 +A11:2019 |
Household and similar electrical appliances – Safety –
Part 2-98: Particular requirements for humidifiers |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 62311:2008 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
0 ㎐ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-8:2007 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 11:2015 +AMD1:2016 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| EN 14511-2:2022 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling -
Part 2: Test conditions |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60529:1989 +AMD1:1999 +AMD2:2013 |
Degrees of protection provided by enclosures (IP Code)
(Exception)
14.2.9 Test for second characteristic numeral 9 by high pressure and temperature water jetting |
IP1X, IP2X, IP3X, IP4X, IP5X, IP6X
IPX1, IPX2, IPX3, IPX4,
IPX5, IPX6, IPX7, IPX8 |
소재지 |
| ▶ 가정용 전기기기 |
| EN 62368-1:2014 +A11:2017 |
Audio/video, information and communication technology equipment –
Part 1: Safety requirements
(Exception)
10 Radiation
Annex C UV radiation
Annex G Components
G.1 Switches
G.2 Relay
G.7 Power supply cords
G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use with outinterleavedinsulation
Annex M Equipment containing batteries and their protection circuit
M.7 Risk of explosion from lead acid and NiCd batteries
M8 Protection against internal ignition from external spark source of batteries with aqueous electrolyte
Annex S Tests for resistance to heat and fire S.3: Flammability tests for the bottom of a fire enclosure |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 62311:2020 |
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
0 ㎐ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-8:2007 +A1:2013 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 11:2015 +AMD2:2019 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| EN 14511-3:2022 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling -
Part 3: Test methods |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 60695-10-2:2014 |
Fire hazard testing –
Part 10-2: Abnormal heat – Ball pressure test method |
Max. 150 ℃, (20 ± 0.2) N |
소재지 |
| ▶ 가정용 전기기기 |
| EN IEC 60335-2-84:2021 + A11:2021 + A12:2023 |
Household and similar electrical appliances – Safety –
Part 2-84: Particular requirements for toilets
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN 62479:2010 |
Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
10 ㎒ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-8:2007 +A1:2013 +A11:2017 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 11:2024 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| EN 14511-4:2022 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling -
Part 4: Operating requirements, marking and instructions |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| IEC 62262:2002 +AMD1:2021 |
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
(Exception)
7. Pendulum hammer |
IK04, IK06, IK07, IK08 |
소재지 |
| ▶ 가정용 전기기기 |
| EN IEC 62368-1:2020 +A11:2020 |
Audio/video, information and communication technology equipment –
Part 1: Safety requirements
(Exception)
10 Radiation
Annex C UV radiation
Annex G Components
G.1 Switches
G.2 Relay
G.7 Power supply cords
G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use with outinterleavedinsulation
Annex M Equipment containing batteries and their protection circuit
M.7 Risk of explosion from lead acid and NiCd batteries
M8 Protection against internal ignition from external spark source of batteries with aqueous electrolyte
Annex S Tests for resistance to heat and fire S.3: Flammability tests for the bottom of a fire enclosure |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN IEC/IEEE 62209-1528:2021 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices –
Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) |
4 ㎒ ~ 10 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-8:2007 +A1:2013 +A11:2017 +A2:2021 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 14-1:2016 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
4.3.3.5 Electric fence |
CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| EN 14825:2022 |
Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling. Testing and rating at part load conditions and calculation of seasonal performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-1:2007 |
환경시험 –
제2-1부: 시험 – 시험 A: 내한성 시험
(제외항목)
5.3 시험 Ad
5.4 시험 Ae |
온도: (-40 ~ 5) ℃ |
소재지 |
| ▶ 가정용 전기기기 |
| EN IEC 62368-3:2020 |
Audio/video, information and communication technology equipment –
Part 3: Safety aspects for DC power transfer through communication cables and ports |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| EN IEC/IEEE 63195-1:2023 |
Assessment of power density of human exposure to radio frequency fields from wireless devices in close proximity to the head and body (frequency range of 6 GHz to 300 GHz) –
Part 1: Measurement procedure |
6 ㎓ ~ 60 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-9:2008 |
Medical electrical equipment –
Part 1-9: General requirements for basic safety and essential performance – Collateral Standard: Requirements for environmentally conscious design |
– |
소재지 |
| ▶ 전자기적합성 |
| CISPR 14-1:2020 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
4.3.3.5 Electric fence energisers
Table 9 testing methods - FAR, TEM-Waveguide |
CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| EN 50563:2011 /A1:2013 |
External a.c. - d.c. and a.c. - a.c. power supplies – Determination of no-load power and average efficiency of active modes |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-14:2023 |
환경시험 –
제2-14부: 시험 – 시험 N : 온도 변화
(제외항목)
8. 시험 Nb
9. 시험 Nc |
온도: (-40 ~ 125) ℃ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60065:2001 +AMD1:2005 +AMD2:2010 |
Audio, Video and Similar electronic apparatus – Safety requirements
(Exception)
6 Hazardous radiations
8.17 Insulated winding wires of wound components
14.2.1, 14.2.2, 14.2.3 Test according to IEC 60384-14
14.6 Switches
16 External flexible cords
18 Mechanical strength of picture tubes and protection against the effects of implosion
20.1.3 Printed boards
Annex H Insulated winding wires for use without interleaved insulation
Annex L Additional requirements for electronic flash apparatus for photographic purposes |
1. Test voltage:
- 1 phase: max.300 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 220-1 (V3.1.1, 2017.02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 1: Technical characteristics and methods of measurement |
9 ㎑ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-9:2013 +A1:2013 |
Medical electrical equipment –
Part 1-9: General requirements for basic safety and essential performance – Collateral Standard: Requirements for environmentally conscious design |
– |
소재지 |
| ▶ 전자기적합성 |
| CISPR 14-2:2015 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 2: Immunity - Product family standard
(Exception)
5.5 Radio frequency electromagnetic fields, 80 ㎒ to
1000 ㎒(IEC 61000-4-22) |
ESD: ±8 ㎸
RS: 3 V/m, (80 ~ 1 000) ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, (0.15 ~ 230) ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| EN 50564:2011 |
Household electrical appliances - Measurement of standby power |
Less than 10 kW |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-2:2007 |
환경시험 –
제2-2부: 시험 – 시험 B: 내열성 시험
(제외항목)
5.3 시험 Bd
5.4 시험 Be |
온도: (30 ~ 125) ℃ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60065:2014 |
Audio, Video and Similar electronic apparatus – Safety requirements
(Exception)
6 Hazardous radiations
8.16 Insulated winding wires of wound components
14.3.1, 14.3.2, 14.3.3, 14.3.4 Test according to IEC 60384-14
14.7 Switches
16 External flexible cords
18 Mechanical strength of picture tubes and protection against the effects of implosion
20.2.4 Printed boards
Annex H Insulated winding wires for use without interleaved insulation
Annex L Additional requirements for electronic flash apparatus for photographic purposes |
1. Test voltage:
- 1 phase: max.300 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 220-2 (V3.1.1, 2017.02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment |
9 ㎑ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-1-9:2013 +A1:2013 +A2:2020 |
Medical electrical equipment –
Part 1-9: General requirements for basic safety and essential performance – Collateral Standard: Requirements for environmentally conscious design |
– |
소재지 |
| ▶ 전자기적합성 |
| CISPR 14-2:2020 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 2: Immunity - Product family standard
(Exception)
5.5 Radio frequency electromagnetic fields, 80 ㎒ to
1000 ㎒(IEC 61000-4-22) |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 230 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| EPA Energy Star Program Requirements EPA Energy Star Program Requirements EnergyStarProgram Requirements |
- for Audio/Video Version 3.0
- for ComputersVersion 9.0
- for TelevisionsVersion 9.0
- for DisplaysVersion 8.0 |
(0 ~ 115) W
(0 ~ 500) W
(0 ~ 500) W
(0 ~ 300) W
(0 ~ 300) W |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-30:2005 |
환경시험 –
제2-30부: 시험 – 시험 Db와 지침: 주기적 내습(12 h + 12 h 주기) |
온도: (25 ~ 55) ℃
습도: (60 ~ 97) % R.H. |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-1:2001 +AMD1:2004 +AMD2:2006 |
Household and similar electrical appliances – Safety –
Part 1: General requirements
(Exception)
22.16 Automatic cord reels test
22.32 Oxigen bomb test
22.46 Software evaluation test
22.48 IEC 61770 test
24.1.1 Capacitor test (IEC 60384-14)
24.1.2 Transformer test (IEC 61558-2-6)
24.1.3 Switch test (IEC 61058-1)
24.1.4 Automatic control for 6.10 and 6.11 of IEC 60730-1
24.1.7 Telecommunication interface test (IEC 62151)
24.1.8 Thermal fuse test (IEC 60691)
24.1.9 Relay for clause 17 of IEC 60730-1
24.4 Terminal device for heating elements (IEC/TR 60083 or IEC 60906-1, IEC 60320-1)
24.7 Hose set (IEC 61770)
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 220-3-1 (V2.1.1, 2016.12) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz) |
9 ㎑ ~ 10 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-10:2015 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 15:2013 +AMD1:2015 |
Amendment 1 – Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
4.2 Insertion loss |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 300 ㎒ |
소재지 |
| ▶ 에너지효율 |
| GS 362:2018 |
Non - ducted air conditioners and heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-38:2021 |
환경시험 –
제2-38부: 시험 – 시험 Z/AD: 합성 온도/습도 사이클 시험 |
온도: (-10 ~ 65) ℃
습도: (80 ~ 95) % R.H. |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-1:2010 +AMD1:2013 +AMD2:2016 |
Household and similar electrical appliances – Safety –
Part 1: General requirements
(Exception)
19.11.4.6 IEC 61000-4-34
22.16 Automatic cord reels test
22.32 Oxigen bomb test
22.46 Software evaluation test
22.48 IEC 61770 test
24.1.1 Capacitor test (IEC 60384-14)
24.1.2 Transformer test (IEC 61558-2-6)
24.1.3 Switch test (IEC 61058-1)
24.1.4 Automatic control for 6.10 and 6.11 of IEC 60730-1
24.1.7 Telecommunication interface test (IEC 62151)
24.1.8 Thermal fuse test (IEC 60691)
24.1.9 Relay for clause 17 of IEC 60730-1
24.4 Terminal device for heating elements (IEC/TR 60083 or IEC 60906-1, IEC 60320-1)
24.7 Hose set (IEC 61770)
Annex F Capacitors
Annex H Switches
Annex J Coated printed circuit boards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 220-3-2 (V1.1.1, 2017.02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz |
9 ㎑ ~ 10 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-10:2015 +A1:2016 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 15:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
9.3 Measurement instrumentation and methods: FAR, TEM |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 1 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| GS IEC 62552:2007 |
Household refrigerating appliances – Characteristics and test methods |
Less than 1 000 L |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-75:2014 |
환경시험 –
제2-75부: 시험 – 시험 Eh: 해머 시험
(제외항목)
5. 시험 Eha: 진자 해머 |
(0.5 ~ 5) J |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-11:2008 |
Household and similar electrical appliances – Safety –
Part 2-11: Particular requirements for tumble dryers
(Exception)
18.101, 18.102 door opening and closing test
22.104 door opening and closing test
Annex CC Non-sparking "n" electrical apparatus |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 220-4 (V1.1.1, 2017.02) |
Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Metering devices operating in designated band 169,400 MHz to 169,475 MHz |
9 ㎑ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-10:2015 +A1:2016 +A2:2024 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 15:2018 +AMD1:2024 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
9.3 Measurement instrumentation and methods: FAR, TEM |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 6 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| GS IEC 62552-1:2015 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60068-2-78:2012 |
환경시험 –
제2-78부: 시험 – 시험 Cab: 안정 상태의 내습성 시험 |
30 ℃, 93 % R.H.
30 ℃, 85 % R.H.
40 ℃, 93 % R.H.
40 ℃, 85 % R.H. |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-11:2008 +AMD1:2012 |
Household and similar electrical appliances – Safety –
Part 2-11: Particular requirements for tumble dryers
(Exception)
18.101, 18.102 door opening and closing test
22.104 door opening and closing test
Annex CC Equipment protection by type of protection "n" |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 328 (V1.9.1, 2015.02) |
Wideband transmission systems ;
Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques ;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
30 ㎒ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-18:2015 |
Medical electrical equipment –
Part 2-18: Particular requirements for the safety of endoscopic equipment
(Exception)
201.10 Protection against unwanted and excessive radiation hazards
201.11.101.1 Thermal and other hazards from interconnection conditions with lasers |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 24:2010 +AMD1:2015 |
Amendment 1 – Information technology equipment –
Immunity characteristics – Limits and methods of measurement |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT: ±1 ㎸
Surge: ±4 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| GS IEC 62552-2:2015 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60529:2013 |
외함의 밀폐 보호등급 구분(IP코드)
(제외항목)
14.2.9 고압 및 고온 물 분사 제트에 의한 제2 특성 숫자 9 시험 |
IP1X, IP2X, IP3X, IP4X, IP5X, IP6X
IPX1, IPX2, IPX3, IPX4,
IPX5, IPX6, IPX7, IPX8 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-11:2008 +AMD1:2012 +AMD2:2015 |
Household and similar electrical appliances – Safety –
Part 2-11: Particular requirements for tumble dryers
(Exception)
18.101, 18.102 door opening and closing test
22.104 door opening and closing test
Annex CC Equipment protection by type of protection "n" |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 328 (V2.1.1. 2016.11) |
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
30 ㎒ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-19:2009 +A11:2011 +A1:2016 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 32:2015 |
Electromagnetic compatibility of multimedia equipment –
Emission Requirements
(Exception)
30 ㎒~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| GS IEC 62552-3:2015 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 60695-10-2:2014 |
화재 위험성 시험 –
제10-2부: 비정상적인 열 – 볼 프레셔(ball pressure) 시험 방법 |
최대 150 ℃, (20 ± 0.2) N |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-11:2019 |
Household and similar electrical appliances – Safety –
Part 2-11: Particular requirements for tumble dryers
(Exception)
18.101, 18.102 Ddoor opening and closing test
22.104 Door opening and closing test
Annex BB Equipment protection by type of protection "n" |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 328 (V2.2.1. 2019.04) |
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
30 ㎒ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-20:2009 +A11:2011 +A1:2016 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 32:2015 +AMD1:2019 |
Electromagnetic compatibility of multimedia equipment –
Emission Requirements
(Exception)
30 ㎒~ 1 ㎓ FAR Measurement
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| GS ISO 13253:2017 |
Ducted air-conditioners and air-to-air heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 환경 및 신뢰성 |
| KS C IEC 62262:2021 |
외부 기계적 충격에 대한 전기기기용 외함의 보호 등급(IK 코드)
(제외항목)
7. 추 해머 |
IK04, IK06, IK07, IK08 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-14:2016 |
Household and similar electrical appliances – Safety –
Part 2-14: Particular requirements for kitchen machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 328 (V2.2.2, 2019.07) |
Wideband transmission systems;
Data transmission equipment operating in the 2,4 GHz band;
Harmonised Standard for access to radio spectrum |
30 ㎒ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-21:2009 +A11:2011 +A1:2016 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
(Exception)
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| CISPR 35:2016 |
Electromagnetic compatibility of multimedia equipment –
Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011 |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒ RS(spot
test): 3 V/m, (1800,
2600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| GS ISO 16358-1:2020 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and calculating methods for seasonal performance factors –
Part 1: Cooling seasonal performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-14:2016 +AMD1:2019 |
Household and similar electrical appliances – Safety –
Part 2-14: Particular requirements for kitchen machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 330 (V2.1.1, 2017.02) |
Short Range Devices (SRD);
Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-24:2015 |
Medical electrical equipment –
Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 50130-4:2011 +A1:2014 |
Alarm systems Part 4: Electromagnetic compatibility –
Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems |
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 100 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| GSO 2530:2016 |
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners |
1φ, 300 Vac Max.,
20 A Max.,
50 Hz/60 Hz |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-15:2002 +AMD1:2005 +AMD2:2008 |
Household and similar electrical appliances – Safety –
Part 2-15 : Particular requirements for appliances for heating liquids
(Exception)
22.103 Cordless appliance test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 440 (V2.1.1, 2017.01) |
Short Range Devices (SRD);
Radio equipment to be used in the 1 GHz to 40 GHz frequency range;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
25 ㎒ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-25:2015 |
Medical electrical equipment –
Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55011:2009 +A1:2010 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.8 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| IEC 60350-2:2025 |
Household electric cooking appliances –
Part 2: Hobs - Methods for measuring performance
4 List of measurements
5 General conditions for the measurements
7 Energy consumption and heating up time |
1φ, 300 Vac Max., 50 ㎐/60 ㎐, 1 kW ~ 10 kW |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-15:2012 +AMD1:2016 +AMD2:2018 |
Household and similar electrical appliances – Safety –
Part 2-15 : Particular requirements for appliances for heating liquids
(Exception)
22.103 Cordless appliance test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 300 440 (V2.2.1, 2018.07) |
Short Range Devices (SRD);
Radio equipment to be used in the 1 GHz to 40 GHz frequency range;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
25 ㎒ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-27:2014 |
Medical electrical equipment –
Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55011:2016 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| IEC 60705:2024 |
Household microwave ovens – Methods for measuring performance
(Exception)
7 Dimensions and volume
10 Technical tests for performance
11 Heating performance
12 Cooking performance
13 Defrosting performance
Annex A, B, C, D, F |
1φ, 300 Vac Max., 50 ㎐/60 ㎐, 3 kVA |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-16:2022 |
Household and similar electrical appliances – Safety –
Part 2-16: Particular requirements for food waste disposers
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 893 (V1.8.1, 2015.03) |
Broadband Radio Access Networks (BRAN);
5 GHz high performance RLAN;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
30 ㎒ ~ 26 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-34:2014 |
Medical electrical equipment –
Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
(Exception)
201.12.1.101.2 Accuracy of systolic and diastolic pressure
201.12.1.101.3 Frequency response |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55011:2016 +A1:2017 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| IEC 62087-1:2015 |
Audio, video, and related equipment – Determination of power consumption –
Part 1: General |
(0 ~ 2 200) W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-2:2002 +AMD1:2004 +AMD2:2006 |
Household and similar electrical appliances – Safety –
Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
(Exception)
21 Mechanical strength
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Test energy: max.5 J |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 893 (V2.0.7, 2016.11) |
5 GHz RLAN;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
30 ㎒ ~ 26 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-37:2008 +A11:2011 +A1:2015 |
Medical electrical equipment –
Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55011:2016 +A11:2020 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| IEC 62087-2:2023 |
Audio, video, and related equipment – Determination of power consumption –
Part 2: Signals and media |
(0 ~ 2 200) W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-2:2009 +AMD1:2012 |
Household and similar electrical appliances – Safety –
Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
(Exception)
21 Mechanical strength
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Test energy: max.5 J |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 893 (V2.1.1, 2017.05) |
5 GHz RLAN;
Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
30 ㎒ ~ 26 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-4:2011 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
201.15.4.3.103 Rechargeable battery |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55011:2016 +A2:2021 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| IEC 62087-3:2023 |
Audio, video, and related equipment – Determination of power consumption –
Part 3: Television sets |
(0 ~ 2 200) W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-2:2009 +AMD1:2012 +AMD2:2016 |
Household and similar electrical appliances – Safety –
Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
(Exception)
21 Mechanical strength
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Test energy: max.5 J |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 893 (V2.2.1, 2024-11) |
5 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum |
30 ㎒ ~ 26 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-4:2011 +A1:2019 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS
201.15.4.3.103 Rechargeable battery |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55013:2013 +A1:2016 |
Sound and television broadcast receivers and associated equipment –
Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 2 150 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
ERP: 0.9 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| IEC 62087-4:2015 |
Audio, video, and related equipment – Determination of power consumption –
Part 4: Video recording equipment |
(0 ~ 2 200) W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-2:2019 |
Household and similar electrical appliances – Safety –
Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
(Exception)
21 Mechanical strength
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Test energy: max.5 J |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 908-1 (V11.1.1, 2016) |
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU;
Part 1: Introduction and common requirements |
30 ㎒ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-43:2010 +A1:2018 +A2:2020 |
Medical electrical equipment –
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55014-1:2006 +A1:2009 +A2:2011 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
7.3.7.2 Electric fence supply units |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| IEC 62087-5:2015 |
Audio, video, and related equipment – Determination of power consumption –
Part 5: Set-top-boxes |
(0 ~ 2 200) W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-21:1997 +AMD1:1999 |
Safety of household and similar electrical appliances –
Part 2-21: Particular requirements for storage water heaters
(Exception)
24.102.1 Thermostat operated test
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 908-1 (V13.1.1, 2019) |
IMT cellular networks; Harmonised Standard for access to radio spectrum;
Part 1: Introduction and common requirements |
30 ㎒ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-44:2009 +A11:2011 +A1:2012 +A2:2016 |
Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 55014-1:2017 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
Annex A.8.2 Electric fence energizers |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| IEC 62087-6:2015 |
Audio, video, and related equipment – Determination of power consumption –
Part 6: Audio equipment |
(0 ~ 2 200) W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-21:2002 +AMD1:2004 +AMD2:2008 |
Household and similar electrical appliances – Safety –
Part 2-21: Particular requirements for storage water heaters
(Exception)
24.102.1 Thermostat operated test
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 908-15 (V11.1.2, 2017) |
IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU;
Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
9 ㎑ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-45:2011 |
Medical electrical equipment –
Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55014-1:2017 +A11:2020 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
Annex A.8.2 Electric fence energizers |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| IEC 62301:2011 |
Household electrical appliances – Measurement of standby power |
Input Power: Max. 500 W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-21:2012 +AMD1:2018 |
Household and similar electrical appliances – Safety –
Part 2-21: Particular requirements for storage water heaters
(Exception)
24.102.1 Thermostat operated test
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 301 908-15 (V15.1.1, 2020) |
IMT cellular networks; Harmonised Standard for access to radio spectrum;
Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters |
9 ㎑ ~ 12.75 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-45:2011 +A1:2015 |
Medical electrical equipment –
Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55014-2:2015 |
Electromagnetic compatibility –
Requirements for household appliances, electric tools and similar apparatus –
Part 2: Immunity – Product family standard |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 230 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| IEC 62552:2007 |
Household refrigerating appliances – Characteristics and test methods |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-23:2016 |
Household and similar electrical appliances – Safety –
Part 2-23: Particular requirements for appliances for skin or hair care
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 340 (V1.2.1, 2020.09) |
Digital Terrestrial TV Broadcast Receivers;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-47:2015 |
Medical electrical equipment –
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55015:2013 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
4.2 Insertionloss |
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 300 ㎒
RE(Electromagnetic): 9 ㎑ ~ 30 ㎒ |
소재지 |
| ▶ 에너지효율 |
| IEC 62552-1:2015 +AMD1:2020 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-23:2016 +AMD1:2019 |
Household and similar electrical appliances – Safety –
Part 2-23: Particular requirements for appliances for skin or hair care
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-1 (V1.1.1, 2019.06) |
Broadcast Sound Receivers;
Part 1: Generic requirements and measuring methods |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-5:2015 |
Medical electrical equipment –
Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
(Exception)
201.10.102 Unwanted ultrasound radiation
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55015:2013 +A1:2015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 300 ㎒
RE(Electromagnetic): 9 ㎑ ~ 30 ㎒ |
소재지 |
| ▶ 에너지효율 |
| IEC 62552-2:2015 +AMD1:2020 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-24:2002 +AMD1:2005 +AMD2:2007 |
Household and similar electrical appliances – Safety –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
(Exception)
22.108 Test apparatus for Flammable refrigerants (IEC 60079-15)
Annex CC Non-sparking “n” electrical apparatus and test condition for “dc”devices |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-2 (V1.1.1, 2020.02) |
Broadcast Sound Receivers;
Part 2: AM broadcast sound service;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-50:2009 +A11:2011 +A1:2016 |
Medical electrical equipment –
Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55022:2010 +AC:2011 |
Information technology equipment –
Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| IEC 62552-3:2015 +AMD1:2020 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-24:2010 +AMD1:2012 +AMD2:2017 |
Household and similar electrical appliances – Safety –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
(Exception)
22.108 Test apparatus for Flammable refrigerants (IEC 60079-15)
Annex CC Non-sparking “n” electrical apparatus and test condition for “dc”devices |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-2 (V1.2.1, 2021.12) |
Broadcast Sound Receivers;
Part 2: AM broadcast sound service;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-52:2010 |
Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
(Exception)
201.9.2.2.2 Gaps
201.9.8.3.3 Dynamic forces due to loading from persons |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55024:2010 +A1:2015 |
Information technology equipment –
Immunity characteristics – Limits and methods of measurement |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| INTE E11-1:2021/ENM1:2022 |
Eficiencia energética.
Refrigeradores y congeladores electrodomésticos.
Parte 1: Requisitos. |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-24:2020 |
Household and similar electrical appliances – Safety –
Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
(Exception)
22.108 Test apparatus for Flammable refrigerants (IEC 60079-15)
Annex CC Non-sparking “n” electrical apparatus and test condition for “dc”devices |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-3 (V1.1.1, 2021.06) |
Broadcast Sound Receivers;
Part 3: FM broadcast sound service;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-52:2010 +A1:2015 |
Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
(Exception)
201.9.2.2.2 Gaps
201.9.8.3.3 Dynamic forces due to loading from persons |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 55032:2015 +A1:2020 |
Electromagnetic compatibility of multimedia equipment –
Emission Requirements
(Exception)
30 ㎒ ~ 1 ㎓ FAR test method
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| INTE E11-2:2021/ENM1:2022 |
Eficiencia energética.
Refrigeradores y congeladores electrodomésticos.
Parte 2: Etiquetado. |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-25:2020 |
Household and similar electrical appliances – Safety –
Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex BB Microwave ovens intended to be used on boared ships |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-4 (V1.1.1, 2021.06) |
Broadcast Sound Receivers;
Part 4: DAB broadcast sound service;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-54:2009 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 55032:2015 +A11:2020 |
Electromagnetic compatibility of multimedia equipment –
Emission Requirements
(Exception)
30 ㎒ ~ 1 ㎓ FAR test method
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| INTE E11-3:2021 |
Eficiencia energética.
Refrigeradores y congeladores electrodomésticos.
Parte 3: Métodos de ensayo. |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-29:2002 +AMD1:2004 +AMD2:2009 |
Household and similar electrical appliances – Safety –
Part 2-29: Particular requirements for battery chargers
(Exception)
21.102 Vibration tests |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-5 (V1.1.1, 2020.02) |
Broadcast Sound Receivers;
Part 5: DRM broadcast sound service;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-54:2009 +A1:2015 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 55032:2015 +AC:2016-07 |
Electromagnetic compatibility of multimedia equipment –
Emission Requirements
(Exception)
30 ㎒ ~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| ▶ 에너지효율 |
| ISO 13253:2017 |
Ducted air-conditioners and air-to-air heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-29:2016 |
Household and similar electrical appliances – Safety –
Part 2-29: Particular requirements for battery chargers
(Exception)
21.102 Vibration tests |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 345-5 (V1.2.1, 2021.12) |
Broadcast Sound Receivers;
Part 5: DRM broadcast sound service;
Harmonised Standard for access to radio spectrum |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-54:2009 +A1:2015 +A2:2019 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 55035:2017 |
Electromagnetic compatibility of multimedia equipment –
Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011 |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MF: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 13253:2017 /AMD1:2020 |
Ducted air-conditioners and air-to-air heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-29:2016 +AMD1:2019 |
Household and similar electrical appliances – Safety –
Part 2-29: Particular requirements for battery chargers
(Exception)
21.102 Vibration tests |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 372-2 (V1.1.1, 2016.04) |
Satellite Earth Stations and Systems (SES);
Satellite broadcast reception equipment;
Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU;
Part 2: Indoor unit |
9 ㎑ ~ 1 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-57:2011 |
Medical electrical equipment –
Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Measuring distance: 1 500 ㎜
5. Measuring power: 10 ㎼ - 300 W |
소재지 |
| ▶ 전자기적합성 |
| EN 55035:2017 +A11:2020 |
Electromagnetic compatibility of multimedia equipment –
Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011 |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MF: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 16358-1:2013 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and calculating methods for seasonal performance factors –
Part 1: Cooling seasonal performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-3:2022 |
Household and similar electrical appliances – Safety –
Part 2-3: Particular requirements for electric irons
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI EN 303 687 (V1.1.1, 2023-06) |
6 GHz WAS/RLAN;
Harmonised Standard for access to radio spectrum
- 4.3.4.2 Transmitter unwanted emissions in the spurious domain
- 4.2.5 Receiver spurious emissions |
30 ㎒ ~ 26 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-62:2015 |
Medical electrical equipment –
Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
(Exception)
201.4.101 Ultrasound measurements
201.10 Protection against unwanted and excessive radiation HAZARDS
201.12.1 Accuracy of controls and instruments
201.12.4 Protection against hazardous output |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-1-2:2007 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic compatibility – Requirements and tests |
CE: 9 k㎐ ~ 30 ㎒
RE: 9 k㎐ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 16358-1:2013 /AMD1:2019 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and calculating methods for seasonal performance factors –
Part 1: Cooling seasonal performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-30:2009 |
Household and similar electrical appliances – Safety –
Part 2-30: Particular requirements for room heaters
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ETSI TS 151 010-1 V12.8.0 |
Digital cellular telecommunications system (Phase 2+);
Mobile Station (MS) conformance specification;
Part 1: Conformance specification (3GPP TS 51.010-1 version 12.8.0 Release 12)
- 12.2 Radiated spurious emissions |
30 ㎒ ~ 4 000 ㎒ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-63:2015 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-1-2:2015 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 16358-1:2013 /AMD2:2024 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and calculating methods for seasonal performance factors –
Part 1: Cooling seasonal performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-30:2009 +AMD1:2016 |
Household and similar electrical appliances – Safety –
Part 2-30: Particular requirements for room heaters
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC OET Bulletin 65 supplement C:2001 |
Evaluating Compliance with FCC Guidelines for Human Exposure to Radio frequency Electromagnetic Fields |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-63:2015 +A1:2019 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-1-2:2015 +A1:2021 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance – Collateral standard: Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒ |
소재지 |
| ▶ 에너지효율 |
| ISO 16358-2:2013 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and claculating methods for seasonal performance factors –
Part 2: Heating seasonal performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-30:2009 +AMD1:2016 +AMD2:2021 |
Household and similar electrical appliances – Safety –
Part 2-30: Particular requirements for room heaters
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 1 Subpart I:2021 |
Procedures Implementing the National Environmental Policy Act of 1969 |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-63:2015 +A1:2019 +A2:2021 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-10:2015 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 16358-3:2013 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and claculating methods for seasonal performance factors –
Part 3: Annual performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-31:2012 |
Household and similar electrical appliances – Safety –
Part 2-31: Particular requirements for range hoods and other cooking fume extractors
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 15 Subpart C:2021 |
Radio frequency devices; Intentional Radiators |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-65:2013 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-10:2015 +A1:2016 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 5151:2010 |
Non - ducted air conditioners and heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-31:2012 +AMD1:2016 |
Household and similar electrical appliances – Safety –
Part 2-31: Particular requirements for range hoods and other cooking fume extractors
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 15 Subpart E:2021 |
Radio frequency devices; Unlicensed National Information Infrastructure Devices |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-65:2013 +A1:2020 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-18:2015 |
Medical electrical equipment –
Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 5151:2017 |
Non - ducted air conditioners and heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-31:2012 +AMD1:2016 +AMD2:2018 |
Household and similar electrical appliances – Safety –
Part 2-31: Particular requirements for range hoods and other cooking fume extractors
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 2:2021 |
Frequency allocations and radio treaty metters; General rules and regulations |
9 ㎑ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN 60601-2-65:2013 +A1:2020 +A2:2021 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-19:2009 +A1:2016 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| ISO 5151:2017 /AMD1:2020 |
Non - ducted air conditioners and heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-31:2024 |
Household and similar electrical appliances – Safety –
Part 2-31: Particular requirements for range hoods and other cooking fume extractors
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 22 Subpart H:2021 |
Public mobile services; Cellular Radiotelephone Services |
9 ㎑ ~ 26.5 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-19:2021 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-19:2009 +A11:2011 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS 2464-1:2013 |
Performance of household electrical appliances – Refrigeration appliances
Part 1: Energy consumption and performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-32:2019 |
Household and similar electrical appliances – Safety –
Part 2-32: Particular requirements for massage appliances
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 24 Subpart E:2021 |
Personal communications services; Broadband PCS |
9 ㎑ ~ 26.5 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-2:2009 +A11:2011 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS 2464-2:2013 |
Performance of household electrical appliances – Refrigerating appliances
Part 2: Minimum energy performance standard requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-35:2012 |
Household and similar electrical appliances – Safety –
Part 2-35: Particular requirements for instantaneous water heaters
(Exception)
3.104 Bare-element water heaters
22.47 Water mains pressure test
22.103 pressure relief device
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 25 Subpart E:2021 |
Satellite communications (Below 3GHz) |
9 ㎑ ~ 26.5 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-20:2020 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-21:2009 +A1:2016 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS 2464-2:2020 |
Performance of household electrical appliances – Refrigerating Performance of household electrical appliances – Refrigerating appliances
Part 2: Minimum energy performance standard requirements |
Less than 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-35:2012 +AMD1:2016 |
Household and similar electrical appliances – Safety –
Part 2-35: Particular requirements for instantaneous water heaters
(Exception)
3.104 Bare-element water heaters
22.47 Water mains pressure test
22.103 pressure relief device
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 27 Subpart C:2021 |
Wireless communications service |
9 ㎑ ~ 26.5 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-21:2021 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
(Exception)
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-22:2019 |
Medical electrical equipment –
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS B ISO 13253:2017 |
덕트 접속형 에어컨디셔너 및 공기 대 공기 열펌프 – 성능 시험 및 평가 |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-35:2012 +AMD1:2016 +AMD:2020 |
Household and similar electrical appliances – Safety –
Part 2-35: Particular requirements for instantaneous water heaters
(Exception)
3.104 Bare-element water heaters
22.47 Water mains pressure test
22.103 pressure relief device
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| FCC Part 96:2021 |
Citizens broadband radio service |
9 ㎑ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-22:2020 |
Medical electrical equipment –
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Measuring distance: 1 500 ㎜
5. Measuring power: 10 ㎼ - 300 W
6. Measuring wavelength: (350 - 1 700) ㎚ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-24:2015 |
Medical electrical equipment –
Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS B ISO 5151:2017 |
덕트 비접속형 에어컨디셔너 및 열펌프 – 성능 시험 및 평가 |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-36:2021 |
Household and similar electrical appliances – Safety –
Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| IEC TR 63170:2018 |
Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz |
6 ㎓ ~ 60 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
(Exception)
201.9.5 Expelled parts hazards |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-25:2015 |
Medical electrical equipment –
Part 2-25: Particular requirements for the safety of electrocardiographs Section 6. Protection against hazards of ignition of flammable anaesthetic mixtures |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS C 9306:2017 |
에어컨디셔너
9.3 냉방능력시험
9.4 냉방소비전력시험
9.7 난방능력시험
9.8 난방소비전력시험 |
냉방능력 11 kW 이하
냉방소비전력 5.5 kW이하
난방능력 11 kW 이하
난방소비전력 5.5 Kw이하 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-37:2021 |
Household and similar electrical appliances – Safety –
Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| IEC/IEEE 62209-1528:2020 |
Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices –
Human models, instrumentation and procedures (Frequency range of 4 MHz to 10 GHz) |
300 ㎒ ~ 10 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-37:2024 |
Medical electrical equipment –
Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-27:2014 |
Medical electrical equipment –
Part 2-27: Particular requirements for the safety, including essential performance of electrocardiographic monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS C 9321:2021 |
김치 냉장고
12.21 소비 전력량 시험
부속서 B. 소비 전력량 시험방법 및 산출방법 |
1 000 L 이하 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-38:2021 |
Household and similar electrical appliances – Safety –
Part 2-38: Particular requirements for commercial electric griddles and griddle grills
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| IEEE 1528 - 2013 |
IEEE Recommended Practice for Determining the Peak Spatial –
Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques |
100 ㎒ ~ 6 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-50:2021 |
Medical electrical equipment –
Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-28:2010 |
Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS C IEC 62301:2011 |
가정용 전기기기의 대기전력 측정방법 |
Input Power: Max. 500 W |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-39:2021 |
Household and similar electrical appliances – Safety –
Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| ONGO-TS-9001-V1.3.0 |
OnGo Release 1 Certification Test Plan |
3 550 ㎒ ~ 3 700 ㎒ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-66:2020 |
Medical electrical equipment –
Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-34:2000 |
Medical electrical equipment –
Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment
36. Electromagnetic compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS C IEC 62552:2007 |
가정용 냉장기기- 특성 및 시험 방법 |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-40:2002 +AMD1:2005 +AMD2:2005 |
Household and similar electrical appliances – Safety –
Part 2-40: Particular requirements for Electrical heat pumps, air-conditioners and dehumidifiers
(Exception)
22.108 Vacuum pressure test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-102 (Issue 5, 2015.03) |
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-83:2020 |
Medical electrical equipment –
Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment
(Exception)
201.6.101 Protection against optical radiation - Classification to IEC 62471 |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-34:2014 |
Medical electrical equipment –
Part 2-34: Particular requirements for the safety, including essential performance, of invasive blood pressure monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS IEC 62552-1:2015AMD1 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
1 000 L 이하 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-40:2013 +AMD1:2016 |
Household and similar electrical appliances – Safety –
Part 2-40: Particular requirements for Electrical heat pumps, air-conditioners and dehumidifiers
(Exception)
22.108 Vacuum pressure test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-102 (Issue 5, Amendment 1 2021.02) |
Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands) |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 60601-2-83:2020 +A11:2021 |
Medical electrical equipment –
Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment
(Exception)
201.6.101 Protection against optical radiation - Classification to IEC 62471 |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-37:2008 +A11:2011 +A1:2015 |
Medical electrical equipment –
Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202.6 Electromagnetic compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS IEC 62552-2:2015AMD1 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements |
1 000 L 이하 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-40:2018 |
Household and similar electrical appliances – Safety –
Part 2-40: Particular requirements for Electrical heat pumps, air-conditioners and dehumidifiers
(Exception)
22.108 Vacuum pressure test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-132 (Issue 3, 2013.01) |
Cellular Telephone Systems Operating in the Bands 824-849 MHz and 869-894 MHz |
9 ㎑ ~ 27 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-30:2019 |
Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
(Exception)
201.15. 3.5.101 Shock and vibration for other than transport
201.15.3.5.102 Shock and vibration for transport |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-4:2011 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| KS IEC 62552-3:2015AMD1 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
1 000 L 이하 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-40:2022 |
Household and similar electrical appliances – Safety –
Part 2-40: Particular requirements for Electrical heat pumps, air-conditioners and dehumidifiers
(Exception)
22.108 Vacuum pressure test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-133 (Issue 6, 2018.01) |
2 ㎓ Personal Communications Services |
9 ㎑ ~ 27 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-49:2019 |
Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-4:2011 +A1:2019 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| MS IEC 62552-1:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
Less than 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-42:2021 |
Household and similar electrical appliances – Safety –
Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
(Exception)
30.101 Test equipment according to ISO 9772 for category HBF
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-133 (Issue 6, Amendment 1 2018.01) |
2 ㎓ Personal Communications Services |
9 ㎑ ~ 27 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-60:2020 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-44:2009 +A2:2016 |
Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒,
ISM bands: 6 V
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| MS IEC 62552-2:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements (Second revision) (IEC 62552-2:2015) |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-43:2017 |
Household and similar electrical appliances – Safety –
Part 2-43: Particular clothes dryers and towel rails |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-139 (Issue 3, 2015.07) |
Advanced Wireless Services (AWS) Equipment Operating in the Bands 1710-1780 MHz and 2110-2180 MHz |
9 ㎑ ~ 27 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-77:2021 |
Medical electrical equipment –
Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-47:2015 |
Medical electrical equipment –
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| MS IEC 62552-3:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
Less than 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-45:2002 |
Household and similar electrical appliances – Safety –
Part 2-45: Particular requirements for portable heating tools and similar appliances
(Exception)
11.3 Platinum resistance
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-210 (Issue 10, 2019.12) |
Licence-Exempt Radio Apparatus: Category I Equipment |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-77:2021 +A1:2023 |
Medical electrical equipment –
Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-49:2015 |
Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NOM-011-ENER-2006 |
Energy efficiency of central, packaged and split-type air-conditioners. Limits, test methods and labelling |
Cooling capacity: Under 8 kW |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-45:2002 +AMD1:2008 |
Household and similar electrical appliances – Safety –
Part 2-45: Particular requirements for portable heating tools and similar appliances
(Exception)
11.3 Platinum resistance
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-210 (Issue 10, 2020.04) |
Licence-Exempt Radio Apparatus: Category I Equipment |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN IEC 80601-2-78:2020 |
Medical electrical equipment –
Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
(Exception)
211.10.1.1 General requirements for mechanical strength - Shock and Broadband random vibration test |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-5:2015 |
Medical electrical equipment –
Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NOM-015-ENER-2012 |
Energy efficiency of refrigerators and freezers home appliances, boundaries, testing and labeling methods |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-45:2002 +AMD1:2008 +AMD2:2011 |
Household and similar electrical appliances – Safety –
Part 2-45: Particular requirements for portable heating tools and similar appliances
(Exception)
11.3 Platinum resistance
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-210 (Issue 9, 2016.08) |
Licence-Exempt Radio Apparatus: Category I Equipment |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-12:2020 |
Medical electrical equipment –
Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy
201.15.3.5.101.1 Shock and vibration (robustness)
201.15.3.5.101.2 Shock and vibration for a transit-operable ventilator during operation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-52:2010 +A1:2015 |
Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NOM-015-ENER-2018 |
Energy efficiency of refrigerators and freezers home appliances, boundaries, testing and labeling methods |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-47:2021 |
Household and similar electrical appliances – Safety –
Part 2-47: Particular requirements for commercial electric boiling pans
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-216 (Issue 2, 2016.01) |
Wireless Power Transfer Devices |
9 ㎑ ~ 10 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-55:2018 |
Medical electrical equipment –
Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
(Exception)
201.15.3.5.101 Additional requirements for shock and vibration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-54:2009 +A1:2015 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒,
ISM bands: 6 V
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NOM-023-ENER-2018 |
Energy efficiency in split-type air conditioners, free discharge and without air ducts. Boundaries, testing and labeling methods. |
Cooling capacity less than 12 kW |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-49:2021 |
Household and similar electrical appliances – Safety –
Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
(Exception)
11.3 Platinum resistance
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-216 (Issue 2, Amendment 1 2020.09) |
Wireless Power Transfer Devices |
9 ㎑ ~ 10 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-56:2017 |
Medical electrical equipment –
Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-54:2009 +A2:2019 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸,
AD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NOM-026-ENER-2015 |
Energy efficiency in split type air conditioners (Inverter) with variable refrigerant flow, free discharge and without air ducts. Limits, test methods and labeling. |
Cooling capacity: Under 11 kW |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-5:2012 |
Household and similar electrical appliances – Safety –
Part 2-5: Particular requirements for dishwashers
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex BB Ageing test for elastomeric parts |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-247 (Issue 1, 2015.05) |
Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-56:2017+A1:2020 |
Medical electrical equipment –
Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-62:2015 |
Medical electrical equipment –
Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NTE INEN 2206:2011 |
Domestic refrigeration appliances or frost – Refrigerators with or without low temperature compartment and inspection requirements |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-5:2012 +AMD1:2018 |
Household and similar electrical appliances – Safety –
Part 2-5: Particular requirements for dishwashers
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex BB Ageing test for elastomeric parts |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-247 (Issue 2, 2017.02) |
Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-61:2019 |
Medical electrical equipment –
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
(Exception)
201.10 Protection against unwanted and excessive radiation HAZARDS - Laser
201.15.3.5.101.1 Shock and vibration
201.15.3.5.101.2 Shock and vibration for professional transport |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-63:2015 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NTE-INEN-2297 |
Household appliances to store frozen food and domestic food freezers for food. Requirements and inspection |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-50:2021 |
Household and similar electrical appliances – Safety –
Part 2-50: Particular requirements for commercial electric bains-marie
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-Gen (Issue 4, 2014.11) |
General Requirements for Compliance of Radio Apparatus |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-69:2020 |
Medical electrical equipment –
Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-63:2015 +A1:2019 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| NTE-INEN-IEC-62552: 2014 |
Household refrigerating appliances – Characteristics and test methods |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-58:2017 |
Household and similar electrical appliances – Safety –
Part 2-58: Particular requirements for commercial electric dishwashing machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex AA Ageing test for elastomeric parts
Annex BB Requirements to avoid backsiphonage |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-Gen (Issue 5, 2018.04) |
General Requirements for Compliance of Radio Apparatus |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-70:2020 |
Medical electrical equipment –
Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-63:2015 +A2:2021 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| OS GSO 2530:2016 |
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners |
1φ, 300 Vac Max.,
20 A Max.,
50 Hz/60 Hz |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-59:2021 |
Household and similar electrical appliances – Safety –
Part 2-59: Particular requirements for insect killers
(Exception)
32 Radiation toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-Gen (Issue 5, Amendment 1 2019.03) |
General Requirements for Compliance of Radio Apparatus |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-72:2015 |
Medical electrical equipment –
Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-65:2013 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| OS GSO IEC 62552-1:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-6:2014 |
Household and similar electrical appliances – Safety –
Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
(Exception)
22.135 Ovens intended for use on board ships shall withstand the pulses
22.136 Ovens intended for use on board ships shall withstand the vibrations
32 Radiation toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| RSS-Gen (Issue 5, Amendment 2 2021.02) |
General Requirements for Compliance of Radio Apparatus |
9 ㎑ ~ 40 ㎓ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-74:2020 |
Medical electrical equipment –
Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-65:2013 +A1:2020 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| OS GSO IEC 62552-2:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-6:2014 +AMD1:2018 |
Household and similar electrical appliances – Safety –
Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
(Exception)
22.135 Ovens intended for use on board ships shall withstand the pulses
22.136 Ovens intended for use on board ships shall withstand the vibrations
32 Radiation toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 유/무선 통신기기 |
| WINNF-TS-0122-V1.0.2 |
Test and Certification for Citizens Broadband Radio Service (CBRS); Conformance and Performance Test Technical Specification; CBSD/DP as Unit Under Test (UUT) |
3 550 ㎒ ~ 3 700 ㎒ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-74:2021 |
Medical electrical equipment –
Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 Hz
4. Temperature: max. 200 °C
5. Insulation resistance: max. 999.9 MΩ
6. Torque: max. 8 N∙m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 kg
9. Dielectric strength: max. 10 kV
10. Leakage current: max. 10 mA |
소재지 |
| ▶ 전자기적합성 |
| EN 60601-2-65:2013 +A2:2021 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| OS GSO IEC 62552-3:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-64:2021 |
Household and similar electrical appliances – Safety –
Part 2-64: Particular requirements for commercial electric kitchen machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-79:2019 |
Medical electrical equipment –
Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 60947-4-3:2014 |
Low-voltage switchgear and controlgear –
Part 4-3: Contactors and motor-starters – Semiconductor controllers and semiconductor contactors for non-motor loads
8.3 EMC requirements
9.4 General |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 에너지효율 |
| PNS IEC 62552-1:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-64:2021 +AMD1:2024 |
Household and similar electrical appliances – Safety –
Part 2-64: Particular requirements for commercial electric kitchen machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-80:2019 |
Medical electrical equipment –
Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-11:2000 |
ElectroMagnetic Compatibility(EMC) –
Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection |
≤75 A |
소재지 |
| ▶ 에너지효율 |
| PNS IEC 62552-2:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-65:2002 +AMD1:2008 +AMD2:2015 |
Household and similar electrical appliances – Safety –
Part 2-65: Particular requirements for air-cleaning appliances
(Exception)
32 Radiation, toxicity and similar hazards
Annex AA UV radiation test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-87:2021 |
Medical electrical equipment –
Part 2-87: Particular requirements for the basic safety and essential performance of high frequency ventilators
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy
201.15.3.5.101 Additional requirements for rough handling - Shock and Broadband random vibration test |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-12:2011 |
ElectroMagnetic Compatibility(EMC) –
Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase |
>16 A and ≤75 A |
소재지 |
| ▶ 에너지효율 |
| PNS IEC 62552-3:2016 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-7:2019 |
Household and similar electrical appliances – Safety –
Part 2-7: Particular requirements for washing machines
(Exception)
18.101, 18.102 Door opening and closing test
22.104 Door opening and closing test
Annex CC Detergent free electrolyser washing machines |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| EN ISO 80601-2-90:2021 |
Medical electrical equipment –
Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-12:2011 +A1:2024 |
ElectroMagnetic Compatibility(EMC) –
Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase |
>16 A and ≤75 A |
소재지 |
| ▶ 에너지효율 |
| PNS ISO 16358-1:2014 |
Air-cooled air conditioners and air-to-air heat pumps – Testing and calculating methods for seasonal performance factors –
Part 1: Cooling seasonal performance factor |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-75:2012 |
Household and similar electrical appliances – Safety –
Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex AA Aging test for elastomeric parts |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1:2005 |
Medical electrical equipment –
Part 1 General requirement for basic safety and essential performance
(Exception)
8.8.4.2 Resistance to environmental stress
9.5.2 Cathode ray tubes
9.6 Acoustic energy (including infra- and ultrasound) and vibration
10.4 Lasers and light emitting diodes (LEDs)
11.2.2 ME equipment and ME systems used in conjunction with oxygen rich environments
11.2.3 Single fault conditions related to oxygen rich environments in conjunction with ME equipment and ME systems
11.4 ME equipment and ME systems intended for use with flammable anaesthetics
11.7 Biocompatibility of ME equipment and ME systems
13.2.11 Failures of components in ME equipment used in conjunction with oxygen rich environments
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against hazarous of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-2:2014 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
≤16 A |
소재지 |
| ▶ 에너지효율 |
| PNS ISO 5151:2014 |
Non - ducted air conditioners and heat pumps – Testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-75:2012 +AMD1:2015 |
Household and similar electrical appliances – Safety –
Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex AA Aging test for elastomeric parts |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1:2005 +AMD1:2012 |
Medical electrical equipment –
Part 1 General requirement for basic safety and essential performance
(Exception)
8.8.4.2 Resistance to environmental stress
9.5.2 Cathode ray tubes
9.6 Acoustic energy (including infra- and ultrasound) and vibration
10.4 Lasers and light emitting diodes (LEDs)
11.2.2 ME equipment and ME systems used in conjunction with oxygen rich environments
11.2.3 Single fault conditions related to oxygen rich environments in conjunction with ME equipment and ME systems
11.4 ME equipment and ME systems intended for use with flammable anaesthetics
11.7 Biocompatibility of ME equipment and ME systems
13.2.11 Failures of components in ME equipment used in conjunction with oxygen rich environments
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against hazarous of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-3:2013 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
≤16 A |
소재지 |
| ▶ 에너지효율 |
| RTCR 482:2015 |
Energy efficiency. Household refrigerators and freezers. Limits, Test methods and labeling |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-75:2012 +AMD1:2015 +AMD2:2018 |
Household and similar electrical appliances – Safety –
Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex AA Aging test for elastomeric parts |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1:2005 +AMD1:2012 +AMD2:2020 |
Medical electrical equipment –
Part 1 General requirement for basic safety and essential performance
(Exception)
8.8.4.2 Resistance to environmental stress
9.5.2 Cathode ray tubes
9.6 Acoustic energy (including infra- and ultrasound) and vibration
10.4 Lasers and light emitting diodes (LEDs)
11.2.2 ME equipment and ME systems used in conjunction with oxygen rich environments
11.2.3 Single fault conditions related to oxygen rich environments in conjunction with ME equipment and ME systems
11.4 ME equipment and ME systems intended for use with flammable anaesthetics
11.7 Biocompatibility of ME equipment and ME systems
13.2.11 Failures of components in ME equipment used in conjunction with oxygen rich environments
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
Annex G Protection against hazarous of ignition of flammable anaesthetic mixtures
Annex L Insulated winding wires for use without interleaved insulation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-3:2013 +A1:2019 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
≤16 A |
소재지 |
| ▶ 에너지효율 |
| RTE INEN 009(1R):2020 |
Aparatos de uso doméstico para producción de frío |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-8:2022 |
Household and similar electrical appliances – Safety –
Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-10:2007 |
Medical electrical equipment –
Part 1-10: General requirements for basic safety and essential performance- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
1. Temperature: max. 200 ℃
2. Humidity: max. 95 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-3:2013 +A2:2021 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
≤16 A |
소재지 |
| ▶ 에너지효율 |
| RTE INEN 035(1R):2020 |
Eficiencia energética en artefactos de refrigeración de uso doméstico. Reporte de consumo de energía, métodos de prueba y etiquetado |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-80:2002 +AMD1:2004 +AMD2:2008 |
Household and similar electrical appliances – Safety –
Part 2-80: Particular requirements for fans |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-10:2007 +AMD1:2013 |
Medical electrical equipment –
Part 1-10: General requirements for basic safety and essential performance- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
1. Temperature: max. 200 ℃
2. Humidity: max. 95 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-3-3:2013 +A2:2021 +AC:2022-01 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection |
≤16 A |
소재지 |
| ▶ 에너지효율 |
| RTS 97.01.01:2015 |
Energy efficiency. Household refrigerators and freezers. Limits, Test methods and labeling |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-80:2015 |
Household and similar electrical appliances – Safety –
Part 2-80: Particular requirements for fans |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-10:2007 +AMD1:2013 +AMD2:2020 |
Medical electrical equipment –
Part 1-10: General requirements for basic safety and essential performance- Collateral Standard: Requirements for the development of physiologic closed-loop controllers |
1. Temperature: max. 200 ℃
2. Humidity: max. 95 % R.H. |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-11:2004 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests |
(0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| SANS 1691:2015 |
Household refrigerating appliances – Characteristics and test methods |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-84:2002 +AMD1:2008 +AMD2:2013 |
Household and similar electrical appliances – Safety –
Part 2-84: Particular requirements for toilets
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-11:2015 |
Medical electrical equipment –
Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
8.3 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS- ingress of particulate matter
10.1.2 Requirements for mechanical strength for non-transit-operable ME equipment
10.1.3 Requirements for mechanical strength for transit-operable ME equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-11:2004 +A1:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests |
(0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| SANS 54511-3:2016 |
Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling –
Part 3: Test methods |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-84:2019 |
Household and similar electrical appliances – Safety –
Part 2-84: Particular requirements for toilets
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-11:2015 +AMD1:2020 |
Medical electrical equipment –
Part 1-11: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
(Exception)
8.3 Additional requirements for ingress of water or particulate matter into ME EQUIPMENT and ME SYSTEMS- ingress of particulate matter
10.1.2 Requirements for mechanical strength for non-transit-operable ME equipment
10.1.3 Requirements for mechanical strength for transit-operable ME equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-13:2002 +A2:2016 |
ElectroMagnetic Compatibility(EMC) –
Part 4-13: Testing and measurement techniques – Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
≤2 ㎑ at 50 ㎐,
≤2.4 ㎑ at 60 ㎐
≤75 A |
소재지 |
| ▶ 에너지효율 |
| SANS 62552:2008 |
Household refrigerating appliances – Characteristics and test methods |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-85:2022 |
Household and similar electrical appliances – Safety –
Part 2-85: Particular requirements for fabric steamers
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-12:2014 |
Medical electrical equipment –
Part 1-12: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
(Exception)
8.1.1 Ingress of water or particulate matter into ME equipment –ingress of particulate matter
8.1.2 Ingress of water or particulate matter into ME SYSTEMS - ingress of particulate matter
10.1.2 Requirements for mechanical strength for FIXED or PERMANENTLY INSTALLED ME EQUIPMENT intended for use in a road ambulance
10.1.3 Requirements for mechanical strength for TRANSPORTABLE ME EQUIPMENT
10.1.4 Requirements for mechanical strength for ME EQUIPMENT intended for airborne use |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-17:1999 +A1:2004 |
ElectroMagnetic Compatibility(EMC) –
Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test |
≤360 V, ≤25 A |
소재지 |
| ▶ 에너지효율 |
| SANS 941:2014 |
Energy efficiency of electrical and electronic apparatus |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-88:2002 |
Household and similar electrical appliances – Safety –
Part 2-88: Particular requirements for Humidifiers intended for use with heating, ventilation or air-conditioning systems
(Exception)
22.7 Test for physical properties of gasket materials. |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-12:2014 +AMD1:2020 |
Medical electrical equipment –
Part 1-12: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
(Exception)
8.1.1 Ingress of water or particulate matter into ME equipment –ingress of particulate matter
8.1.2 Ingress of water or particulate matter into ME SYSTEMS - ingress of particulate matter
10.1.2 Requirements for mechanical strength for FIXED or PERMANENTLY INSTALLED ME EQUIPMENT intended for use in a road ambulance
10.1.3 Requirements for mechanical strength for TRANSPORTABLE ME EQUIPMENT
10.1.4 Requirements for mechanical strength for ME EQUIPMENT intended for airborne use |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-17:1999 +A2:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test |
≤360 V, ≤25 A |
소재지 |
| ▶ 에너지효율 |
| SASO 2663:2021 |
Air Conditioners - Minimum Energy Performance, Labelling and Testing Requirements for Low Capacity Window and Single-Split Types |
Cooling capacity less than 15 Kw |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-89:2002 +AMD1:2005 +AMD2:2007 |
Household and similar electrical appliances – Safety –
Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-3:2008 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-2:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
±(2 ~ 15) ㎸ |
소재지 |
| ▶ 에너지효율 |
| SASO 2664:2013 |
Energy Performance and Capacity of Household Refrigerators, Refrigerators – Freezers, and Freezers |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-89:2010 +AMD1:2012 |
Household and similar electrical appliances – Safety –
Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-3:2008 +AMD1:2013 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-29:2000 |
ElectroMagnetic Compatibility(EMC) –
Part 4-29: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
≤75 A |
소재지 |
| ▶ 에너지효율 |
| SASO 2681:2013 |
Non-ducted air conditioners and heat pumps – testing and rating performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-89:2010 +AMD1:2012 +AMD2:2015 |
Household and similar electrical appliances – Safety –
Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-3:2008 +AMD1:2013 +AMD2:2021 |
Medical electrical equipment –
Part 1-3: General requirements for basic safety and essential performance – Collateral Standard: Radiation protection in diagnostic X-ray equipment |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-3:2006 +A2:2010 |
ElectroMagnetic Compatibility(EMC) –
Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
10 V/m, 80 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 에너지효율 |
| SASO 2682:2013 |
Ducted air-conditioners and air-to-air heat pumps-testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-89:2019 |
Household and similar electrical appliances – Safety –
Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-6:2010 |
Medical electrical equipment –
Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-34:2007 +A1:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
>16 A and ≤75 A |
소재지 |
| ▶ 에너지효율 |
| SASO 2892:2018 |
Refrigerators and freezers – requirements of energy performance labels and tests |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-9:2019 |
Household and similar electrical appliances – Safety –
Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-6:2010 +AMD1:2013 |
Medical electrical equipment –
Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-34:2007 +A1:2009 +A2:2025 |
ElectroMagnetic Compatibility(EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
>16 A and ≤75 A |
소재지 |
| ▶ 에너지효율 |
| UAE.S 5010-1:2019 |
Labeling – Energy efficiency label for electrical appliances –
Part 1: Household air conditioners |
Cooling capacity: Under 11 kW |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-90:2015 |
Household and similar electrical appliances – Safety –
Part 2-90: Particular requirements for commercial microwave ovens
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex BB Requirements for commercial microwaves ovens without door and with conveyor-type means
Annex EE Microwaves ovens intended to be used on board ships |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-6:2010 +AMD1:2013 +AMD2:2020 |
Medical electrical equipment –
Part 1-6: General requirements for basic safety and essential performance – Collateral standard: Usability |
– |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-4:2012 |
ElectroMagnetic Compatibility(EMC) –
Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
±(0.25 ~ 4) ㎸ |
소재지 |
| ▶ 에너지효율 |
| UAE.S 5010-3:2022 |
Labeling – Energy efficiency label for electrical appliances –
Part 3: Household refrigerating appliances |
Under 1 000 L |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-90:2015 +AMD1:2019 |
Household and similar electrical appliances – Safety –
Part 2-90: Particular requirements for commercial microwave ovens
(Exception)
32 Radiation, toxicity and similar hazards
Annex R Software evaluation
Annex BB Requirements for commercial microwaves ovens without door and with conveyor-type means
Annex EE Microwaves ovens intended to be used on board ships |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.480 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Dielectric strength: max.10 ㎸
8. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-8:2006 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-5:2014 |
ElectroMagnetic Compatibility(EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test |
±(0.5 ~ 4) ㎸ |
소재지 |
| ▶ 에너지효율 |
| UAE.S 5010-5:2016 |
Labeling – Energy efficiency label for electrical appliances –
Part 5: Commercial and central air conditioners |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60335-2-98:2002 +AMD1:2004 +AMD2:2008 |
Household and similar electrical appliances – Safety –
Part 2-98: Particular requirements for humidifiers |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Torque: max.8 N·m
6. Humidity: max.95 % R.H.
7. Mass: max.100 ㎏
8. Dielectric strength: max.10 ㎸
9. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-8:2006 +AMD1:2012 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-5:2014 +A1:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test |
±(0.5 ~ 4) ㎸ |
소재지 |
| ▶ 에너지효율 |
| UAE.S GSO IEC 62552-1:2015 |
Household refrigerating appliances – Characteristics and test methods –
Part 1: General requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60950-1:2001 |
Information technology equipment – Safety –
Part 1: General requirements
(Exception)
2.8.7.3 Endurance test
3.2.5.1 AC power supply cords
4.2.8 Cathode ray tubes
4.3.12 Flammable liquids
4.3.13.2 Ionizing radiation
4.3.13.3 Effect of ultraviolet (UV) radiation on materials
Cl 4.3.13.4 Human exposure to ultraviolet (UV) radiation
4.3.13.5 Lasers (including LEDs)
6.3 Protection of the telecommunication wiring system from overheating
7 Connection to cable distribution systems
Annex A.3 Hot flaming oil test
Annex H Ionizing radiation
Annex U Insulated winding wires for use without interleaved insulation
Annex Y Ultraviolet light conditioning test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-8:2006 +AMD1:2012 +AMD2:2020 |
Medical electrical equipment –
Part 1-8: General requirements for basic safety and essential performance – Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems |
Sound level: 140 ㏈ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-6:2014 +AC:2015 |
ElectroMagnetic Compatibility(EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
10 V, 0.15 ㎒ ~ 80 ㎒ |
소재지 |
| ▶ 에너지효율 |
| UAE.S GSO IEC 62552-2:2015 |
Household refrigerating appliances – Characteristics and test methods –
Part 2: Performance requirements |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 60950-1:2005 +AMD1:2009 +AMD2:2013 |
Information technology equipment – Safety –
Part 1: General requirements
(Exception)
2.8.7.3 Endurance test
3.2.5.1 AC power supply cords
4.2.8 Cathode ray tubes
4.3.12 Flammable liquids
4.3.13.2 Ionizing radiation
4.3.13.3 Effect of ultraviolet (UV) radiation on materials
Cl 4.3.13.4 Human exposure to ultraviolet (UV) radiation
4.3.13.5 Lasers (including LEDs)
6.3 Protection of the telecommunication wiring system from overheating
7 Connection to cable distribution systems
Annex A.3 Hot flaming oil test
Annex H Ionizing radiation
Annex U Insulated winding wires for use without interleaved insulation
Annex Y Ultraviolet light conditioning test |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-9:2007 |
Medical electrical equipment –
Part 1-9: General requirements for basic safety and essential performance – Collateral Standard: Requirements for environmentally conscious design |
– |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-4-8:2010 |
ElectroMagnetic Compatibility(EMC) –
Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test |
(1 ~30) A/m |
소재지 |
| ▶ 에너지효율 |
| UAE.S GSO IEC 62552-3:2015 |
Household refrigerating appliances – Characteristics and test methods –
Part 3: Energy consumption and volume |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 62368-1:2014 |
Audio/video, information and communication technology equipment –
Part 1: Safety requirements
(Exception)
10 Radiation
Annex C UV radiation
Annex G Components
G.1 Switches
G.2 Relay
G.7 Power supply cords
G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M Equipment containing batteries and their protection circuit
M.7 Risk of explosion from lead acid and NiCd batteries
M.8 Protection against internal ignition from external spark source of batteries with aqueous electrolyte
Annex S Tests for resistance to heat and fire S.3: Flammability tests for the bottom of a fire enclosure |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-9:2007 +AMD1:2013 |
Medical electrical equipment –
Part 1-9: General requirements for basic safety and essential performance – Collateral Standard: Requirements for environmentally conscious design |
– |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-6-1:2007 |
ElectroMagnetic Compatibility(EMC) –
Part 6-1: Generic standards – Immunity for residential, commercial and light-industrial environments |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| UAE.S ISO 5151:2010 |
Non-ducted air conditioners and heat pumps – testing and rating for performance |
1φ, 300 Vac Max.,
20 A Max.,
50 ㎐/60 ㎐ |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 62368-1:2018 |
Audio/video, information and communication technology equipment –
Part 1: Safety requirements
(Exception)
10 Radiation
Annex C UV radiation
Annex G Components
G.1 Switches
G.2 Relay
G.7 Power supply cords
G.15 Pressurized liquid filled components
Annex J Insulated winding wires for use without interleaved insulation
Annex M Equipment containing batteries and their protection circuit
M.7 Risk of explosion from lead acid and NiCd batteries
M.8 Protection against internal ignition from external spark source of batteries with aqueous electrolyte
Annex S Tests for resistance to heat and fire S.3: Flammability tests for the bottom of a fire enclosure |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-1-9:2007 +AMD1:2013 +AMD2:2020 |
Medical electrical equipment –
Part 1-9: General requirements for basic safety and essential performance – Collateral Standard: Requirements for environmentally conscious design |
– |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-6-2:2005 +Corrigendum Sep.2005 |
ElectroMagnetic Compatibility(EMC) –
Part 6-2: Generic standards – Immunity for industrial environments |
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 에너지효율 |
| 기후에너지환경부 제2025-26호 (2026.1.23.) |
효율관리기자재의 운용규정
별표1의1 전기냉장고
별표1의3 김치냉장고
별표1의4 전기냉방기
별표1의9 전기냉온수기
별표1의10 전기밥솥
별표1의20 어댑터〮충전기
별표1의21 전기 냉난방기
별표1의22 상업용 전기냉장고
별표1의26 텔레비전 수상기
별표1의27 전기온풍기
별표1의28 전기스토브
별표1의30 제습기
별표1의36 전기레인지
별표1의42 사이니지 디스플레이
별표1의44 모니터
별표1의46 이동식 에어컨디셔너
별표1의49 컴퓨터
별표1의50 복합기
별표1의52 비데 |
- 전기냉장고: 유효내용적 1 000 L 이하
- 김치냉장고: 유효내용적 1 000 L 이하
- 전기냉방기: 냉방능력 11 kW 이하(싱글형)
- 전기냉온수기: 최대 3 kW 이하
- 전기밥솥: 20인용 이하
- 어댑터: 출력전력 150 W 이하
- 충전기: 입력전력 20 W 이하
- 전기 냉난방기: 냉방능력 11 kW 이하(싱글형)
- 상업용 냉장고 및 냉동냉장고: 유효 내용적 300 L 이상 2 000 L 이하
- 냉장진열대 : 유효내용적 300 L 이상 1 500 L 이하
- 텔레비전 수상기: 화면 대각선길이 47 ㎝ 이상부터 216 ㎝ 이하
- 전기온풍기, 전기스토브: 정격소비전력 500 W 이상 10 kW 이하
- 제습기: 1 kW 이하
- 전기레인지: 정격 소비 전력이 1 kW 이상 10 kW 이하
- 사이니지 디스플레이: 화면 대각선길이 30.48 cm 이상부터 154.94 cm 이하
- 모니터: 화면 대각선길이 153 cm 이하
- 이동식에어컨디셔너: 냉방능력 23 kW 미만
- 컴퓨터 : 15 kVA
- 복합기 : 5 000 W 이하
- 비데 : 3 500 W이하 |
소재지 |
| ▶ 가정용 전기기기 |
| IEC 62368-3:2017 |
Audio/video, information and communication technology equipment –
Part 3: Safety aspects for DC power transfer through communication cables and ports |
1. Test voltage:
- 1 phase: max.300 Vac
- Three phase: max.440 Vac
2. Current: max.30 A
3. Frequency: max.65 ㎐
4. Temperature: max.200 ℃
5. Insulation resistance: max.999.9 ㏁
6. Torque: max.8 N·m
7. Humidity: max.95 % R.H.
8. Mass: max.100 ㎏
9. Dielectric strength: max.10 ㎸
10. Leakage current: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-10:2012 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-6-3:2007 +A1:2011 +AC:2012 |
ElectroMagnetic Compatibility(EMC) –
Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A |
소재지 |
| ▶ 에너지효율 |
| 기후에너지환경부 제2026-25호 (2026.1.23.) |
대기전력저감 프로그램운용규정
별표1의3. 프린터
별표1의5. 복사기
별표1의6. 스캐너
별표1의10. 오디오
별표1의11. DVD플레이어
별표1의12. 라디오카세트
별표1의13. 전자레인지
별표1의15. 도어폰
별표1의16. 유무선전화기
별표1의20. 손건조기
별표1의21. 서버 |
프린터 : 500 W 이하
복사기 : 5 000 W 이하
스캐너 : 1 000 W 이하
오디오 : 1 000 W 이하
DVD 플레이어 : 150 W 이하
라디오카세트 : 1 000 W 이하
전자레인지 : 4 000 W 이하
도어폰 : 100 W 이하
유무선 전화기 : 150 W 이하
손건조기 : 2 000 W 이하
서버 : 1 000 W 이하 |
소재지 |
| ▶ 가정용 전기기기 |
| K 10010:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
새싹 및 콩나물 재배기의 개별요구사항
(제외항목)
32 방사선, 유독성 및 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-10:2012 +AMD1:2016 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61000-6-4:2007 +A1:2011 |
ElectroMagnetic Compatibility(EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| K 10012:2013 |
가정용 및 이와 유사한 전기기기의 안전성 –
전기헬스기구의 개별요구사항
(제외항목)
32 방사선, 유독성 및 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-10:2012 +AMD1:2016 +AMD2:2023 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 Hz
4. Temperature: max. 200 °C
5. Insulation resistance: max. 999.9 MΩ
6. Torque: max. 8 N∙m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 kg
9. Dielectric strength: max. 10 kV
10. Leakage current: max. 10 mA |
소재지 |
| ▶ 전자기적합성 |
| EN 61204-3:2000 |
Low voltage power supplies, d.c. output –
Part 3: ElectroMagnetic Compatibility(EMC) |
CE: 0.15 ㎒ ~ 30 ㎒
RE, DP: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| K 60335-2-85:2007 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-85부: 직물용 전기 스티머에 대한 개별 요구 사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-18:2009 |
Medical electrical equipment –
Part 2-18: Particular requirements for the safety of endoscopic equipment
(Exception)
201.10 Protection against unwanted and excessive radiation hazards
201.11.101.1 Thermal and other hazards from interconnection conditions with lasers |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61326-1:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| K 70000:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
전기소독기 및 이와 유사한 전기기기에 대한 개별 요구사항
(제외항목)
32 방사선, 유독성 및 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-19:2009 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61326-2-6:2013 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-1ː2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제1부: 일반 요구사항
(제외항목)
19.11.4.6 KS C IEC 61000-4-34 시험
22.16 자동식코드릴시험
22.32 산소용기
22.46 소프트웨어평가 시험
22.48 KS C IEC 61770 시험
24.1.1 캐패시터시험(KS C IEC 60384-14)
24.1.2 안전절연변압기(KS C IEC 61558-2-6)
24.1.3 스위치시험(KS C IEC 61058-1)
24.1.4 자동조절기시험(6.10 and 6.11 of KS C IEC 60730-1)
24.1.7 통신인터페이스 회로시험(KS C IEC 62151)
24.1.8 온도퓨즈 시험( KS C IEC 60691)
24.1.9 릴레이(clause 17 of KS C IEC 60730-1)
24.4 전열소자용단자로 사용하는 플러그 등 시험(IEC/TR 60083 or IEC 60906-1, KS C IEC 60320-1)
24.7 호스세트 시험(KS C IEC 61770)
부속서 F 커패시터
부속서 H 스위치
부속서 J 피복된 인쇄회로기판
부속서 R 소프트웨어 평가
부속서 T 비금속 재료에 대한 UV-C 방사 효과 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-19:2009 +AMD1:2016 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 61547:2009 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/Burst: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, (0.15 ~ 80) ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-11:2021 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-11부: 회전식 건조기의 개별 요구사항
(제외항목)
18.101, 18.102 문 개폐시험
22.104 문 개폐시험
Annex CC 보호 "n" 유형의 장비 보호 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-19:2020 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 80601-2-30:2010 +A1:2015 |
Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-14:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-14부: 주방기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-2:2009 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN 80601-2-60:2015 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-14:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-14부: 주방기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-2:2017 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 55011:2025 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 18 ㎓ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-15:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-15부: 액체 가열용 전기기기의 개별 요구사항
(제외항목)
22.103 무선제품시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-2:2017 +AMD1:2023 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 Hz
4. Temperature: max. 200 °C
5. Insulation resistance: max. 999.9 MΩ
6. Torque: max. 8 N∙m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 kg
9. Dielectric strength: max. 10 kV
10. Leakage current: max. 10 mA |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 55014-1:2021 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
4.3.3.5 Electric fence energisers
Table 9 testing methods - FAR, TEM-Waveguide |
CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-16:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-16부: 음식물 쓰레기 처리기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-20:2009 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 55014-2:2021 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus –
Part 2: Immunity – Product family standard
(Exception)
5.5 Radio frequency electromagnetic fields, 80 ㎒ to
1000 ㎒(IEC 61000-4-22) |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 230 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-16:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-16부: 음식물 쓰레기 처리기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-20:2009 +AMD1:2016 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 55015:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 1 000 ㎒
RE(Electromagnetic): 9 ㎑ ~ 30 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-2:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-2부: 전기 진공청소기 및 물흡입 청소기의 개별 요구사항
(제외항목)
21 기계적 강도
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. 인가에너지: max.5 J |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-20:2020 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
(Exception)
201.12.1.110 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 55015:2019 +A11:2020 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 1 000 ㎒
RE(Electromagnetic): 9 ㎑ ~ 30 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-21:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-21부: 전기온수기의 개별요구사항
(제외항목)
24.102.1 자동온도조절기시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-21:2009 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
(Exception)
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60601-2-19:2021 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-21:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-21부: 전기온수기의 개별요구사항
(제외항목)
24.102.1 자동온도조절기시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-21:2009 +AMD1:2016 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
(Exception)
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60601-2-2:2018 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-23:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-23부: 피부 손질 또는 모발 손질용 전기기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-21:2020 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
(Exception)
201.12.1.104 Oxygen control
201.12.4.2.101 CO2 concentration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60601-2-20:2020 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-24:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-24부 : 전기 냉장고, 아이스크림 기기 및 제빙기의 개별 요구사항
(제외항목)
19.105 배터리 동작기기 관련 시험 장비
22.108 인화성 냉매관련 시험장비 (IEC 60079-15)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 CC 비점화 “n”전기장치 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-22:2007 |
Medical electrical equipment –
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Measuring distance: 1 500 ㎜
5. Measuring power: 10 ㎼ - 300 W
6. Measuring wavelength: (350 - 1 700) ㎚ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60601-2-21:2021 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-24:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-24부 : 전기 냉장고, 아이스크림 기기 및 제빙기의 개별 요구사항
(제외항목)
19.105 배터리 동작기기 관련 시험 장비
22.108 인화성 냉매관련 시험장비 (IEC 60079-15)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 CC 비점화 “n”전기장치 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-22:2007 +AMD1:2012 |
Medical electrical equipment –
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Measuring distance: 1 500 ㎜
5. Measuring power: 10 ㎼ - 300 W
6. Measuring wavelength: (350 - 1 700) ㎚ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60601-2-22:2020 |
Medical electrical equipment –
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-25:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-25부: 전자레인지의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 BB 선상에서 사용하도록 만들어진 전자레인지 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-22:2019 |
Medical electrical equipment –
Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Measuring distance: 1 500 ㎜
5. Measuring power: 10 ㎼ - 300 W
6. Measuring wavelength: (350 - 1 700) ㎚ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60601-2-28:2019 |
Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-29:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-29부: 배터리 충전기의 개별 요구사항
(제외항목)
21.102 진동시험
32 방사선, 유독성 및 이와 유사한 위험성 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-24:2012 |
Medical electrical equipment –
Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-1:2021 |
Low-voltage switchgear and controlgear –
Part 1: General rules
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Tests for EMC |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-29:2026 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-29부: 배터리 충전기의 개별 요구사항
(제외항목)
21.102 진동시험
32 방사선, 유독성 및 이와 유사한 위험성 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-25:2011 |
Medical electrical equipment –
Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-1:2021 +AC:2023-01 |
Low-voltage switchgear and controlgear –
Part 1: General rules
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Tests for EMC |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-3:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-3부: 전기 다리미의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-27:2011 |
Medical electrical equipment –
Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-1:2021 +AC:2024-05 |
Low-voltage switchgear and controlgear –
Part 1: General rules
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Tests for EMC |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-30:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-30부: 실내용 난방기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-28:2017 |
Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
(Exception)
201.9.5 Expelled parts hazards |
1. Measuring distance: 1 500 ㎜
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-3:2021 |
Low-voltage switchgear and controlgear –
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Electromagnetic compatibility tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-31:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-31부: 레인지 후드의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-34:2011 |
Medical electrical equipment –
Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
(Exception)
201.12.1.101.2 Accuracy of systolic and diastolic pressure
201.12.1.101.3 Frequency response |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-3:2021 +A1:2025 |
Low-voltage switchgear and controlgear –
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Electromagnetic compatibility tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-32:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-32부: 전기 마사지 기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-37:2007 |
Medical electrical equipment –
Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-3:2021 +AC:2021-11 |
Low-voltage switchgear and controlgear –
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Electromagnetic compatibility tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-35:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-35부: 순간온수기의 개별 요구사항
(제외항목)
3.104 노출 전열 소자 온수기
22.47 수압 시험
22.103 압력 경감 장치
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-37:2007 +AMD1:2015 |
Medical electrical equipment –
Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-1:2019 |
Low-voltage switchgear and controlgear –
Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
8.3 ElectroMagnetic Compatibility(EMC)
9.4 EMC tests
(Exception)
9.4.2.9 Harmonics in the supply |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-35:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-35부: 순간온수기의 개별 요구사항
(제외항목)
3.104 노출 전열 소자 온수기
22.47 수압 시험
22.103 압력 경감 장치
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-37:2024 |
Medical electrical equipment –
Part 2-37: Particular requirements for the safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
(Exception)
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-1:2019 +AC:2020-05 |
Low-voltage switchgear and controlgear –
Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
8.3 ElectroMagnetic Compatibility(EMC)
9.4 EMC tests
(Exception)
9.4.2.9 Harmonics in the supply |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-36:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-36부 : 상업용 전기 조리레인지, 오븐, 호브 및 호브소자에 대한 개별요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-4:2010 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-1:2019 +AC:2021-04 |
Low-voltage switchgear and controlgear –
Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
8.3 ElectroMagnetic Compatibility(EMC)
9.4 EMC tests
(Exception)
9.4.2.9 Harmonics in the supply |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-37:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-37부: 상업용 전기 튀김기 및 전기 도너츠 튀김기에 대한 개별요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-4:2010 +AMD1:2018 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
(Exception)
201.11.6.7 Sterilization of ME EQUIPMENT and ME SYSTEMS |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-1:2025 |
Low-voltage switchgear and controlgear –
Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
8.3 ElectroMagnetic Compatibility(EMC)
9.4 EMC tests
(Exception)
9.4.2.9 Harmonics in the supply |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-37:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-37부: 상업용 전기 튀김기 및 전기 도너츠 튀김기에 대한 개별요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-43:2010 |
Medical electrical equipment –
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-2:2023 |
Low-voltage switchgear and controlgear –
Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters
8.3 EMC requirements
9.4 EMC tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-38:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-38부: 상업용 전기 그리들 및 그리들 그릴에 대한 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-43:2010 +AMD1:2017 |
Medical electrical equipment –
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-2:2023 +A1:2024 |
Low-voltage switchgear and controlgear –
Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters
8.3 EMC requirements
9.4 EMC tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-38:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-38부: 상업용 전기 그리들 및 그리들 그릴에 대한 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-43:2010 +AMD1:2017 +AMD2:2019 |
Medical electrical equipment –
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-4-3:2024 |
Low-voltage switchgear and controlgear –
Part 4-3: Contactors and motor-starters – Semiconductor controllers and semiconductor contactors for non-motor loads
8.3 EMC requirements
9.4 EMC tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-39:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-39부: 상업용 전기 다목적 조리팬의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-43:2022 |
Medical electrical equipment –
Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-5-2:2020 |
Low-voltage switchgear and controlgear –
Part 5-2: Control circuit devices and switching elements – Proximity switches
8.2.6 ElectroMagnetic Compatibility(EMC)
9.6 Verification of the electromagnetic compatibility |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-39:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-39부: 상업용 전기 다목적 조리팬의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-44:2009 |
Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 60947-5-2:2020 +A11:2022 |
Low-voltage switchgear and controlgear –
Part 5-2: Control circuit devices and switching elements – Proximity switches
Annex ZC Proximity switches with integrated radio functionality
ZC.5.3 Electromagnetic compatibility |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-40:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-40부: 히트펌프, 에어컨디셔너 및 제습기의 개별 요구사항
(제외항목)
22.108 진공압력시험
22.127 UV-C 외부조사 시험
22.128 UV-C 복사조도 시험
22.129 UV-C 스펙트림 조사량 시험
23.101 UV-C 노출 내부배선 시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 CC 가연성 냉매를 사용하는 장치의 수송, 마킹 및 저장
부속서 KK A2L의 고온 점화 온도 시험 방법
부속서 LL A2L 냉매용 냉매 검출 시스템
부속서 MM 냉매 센서 위치 확인 테스트
부속서 NN A2L 냉매에 대한 화염 안전장치 검증 테스트
부속서 OO 자외선 복사 조절 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-44:2009 +AMD1:2012 |
Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-3-11:2019 |
ElectroMagnetic Compatibility(EMC) –
Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current <= 75 A and subject to conditional connection |
≤75 A |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-42:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-42부: 상업용 전기 강제 대류형 오븐, 스팀형 조리기 및 스팀 대류형 오븐의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-44:2009 +AMD1:2012 +AMD2:2016 |
Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-3-2:2019 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
≤16 A |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-42:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-42부: 상업용 전기 강제 대류형 오븐, 스팀형 조리기 및 스팀 대류형 오븐의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-45:2011 |
Medical electrical equipment –
Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-3-2:2019 +A1:2021 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
≤16 A |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-43:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제 2-43부 : 옷건조기 및 타올걸이의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-45:2011 +AMD1:2015 |
Medical electrical equipment –
Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-3-2:2019 +A1:2021 +A2:2024 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: limits – Limits for harmonic current emissions (equipment input current <= 16 A per phase) |
≤16 A |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-45:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-45부: 휴대형 가열기기 및 이와 유사한 전기기기의 개별 요구사항
(제외항목)
11.3 백금저항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-45:2011 +AMD1:2015 +AMD2:2022 |
Medical electrical equipment –
Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-4-11:2020 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
(0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-47:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-47부: 상업용 전기 끓임 팬의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-47:2012 |
Medical electrical equipment –
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-4-11:2020 +AC:2020-06 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
(0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-47:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-47부: 상업용 전기 끓임 팬의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-5:2009 |
Medical electrical equipment –
Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
(Exception)
201.10.102 Unwanted ultrasound radiation
201.12 Accuracy of controls and instruments and protection against hazardous outputs |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-4-11:2020 +AC:2022-10 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
(0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-49:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-49부: 상업용 전기 보온기기의 개별 요구사항
(제외항목)
11.3 백금저항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-50:2009 |
Medical electrical equipment –
Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-4-3:2020 |
ElectroMagnetic Compatibility(EMC) –
Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
10 V/m, 80 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-49:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-49부: 상업용 전기 보온기기의 개별 요구사항
(제외항목)
11.3 백금저항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-50:2009 +AMD1:2016 |
Medical electrical equipment –
Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-4-6:2023 |
ElectroMagnetic Compatibility(EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
10 V, 0.15 ㎒ ~ 230 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-5:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-5부: 전기 식기세척기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 B 고무 부분의 수명 시험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-50:2020 |
Medical electrical equipment –
Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-6-1:2019 |
ElectroMagnetic Compatibility(EMC) –
Part 6-1: Generic standards – Immunity standard for residential, commercial and light-industrial environments |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-5:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-5부: 전기 식기세척기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 B 고무 부분의 수명 시험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-52:2009 |
Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
(Exception)
201.9.2.2.2 Gaps
201.9.8.3.3 Dynamic forces due to loading from persons |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-6-2:2019 |
ElectroMagnetic Compatibility(EMC) –
Part 6-2: Generic standards – Immunity standard for industrial environments |
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-50:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-50부: 상업용 전기 이중 냄비의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-52:2009 +AMD1:2015 |
Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
(Exception)
201.9.2.2.2 Gaps
201.9.8.3.3 Dynamic forces due to loading from persons |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-6-3:2021 |
ElectroMagnetic Compatibility(EMC) –
Part 6-3: Generic standards – Emission standard for equipment in residential environments |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-58:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-58부: 상업용 전기 식기세척기의 개별 요구사항
(제외항목)
3.5.102 브러시 기기
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 AA 엘라스토메릭 부분에 대한 열화 시험
부속서 BB 역류 방지를 위한 요구사항 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-54:2009 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61000-6-4:2019 |
ElectroMagnetic Compatibility(EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments
(Exception)
Table 1 – 1.3 Enclosure Test facility: TEM Waveguide |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-59:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-59부: 전기살충기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-54:2009 +AMD1:2015 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61204-3:2018 |
Low voltage switch mode power supplies –
Part 3: ElectroMagnetic Compatibility(EMC) |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒
3 V/m, 1 400 ㎒ ~ 2 000 ㎒
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-59:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-59부: 전기살충기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-54:2009 +AMD1:2015 +AMD2:2018 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61326-1:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H : ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-6:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-6부: 거치형 조리레인지, 호브, 오븐 및 이와 유사한 기기의 개별 요구사항
(제외항목)
22.135 선상 파동시험 요구 조건
22.136 선상 진동시험 요구 조건
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-54:2022 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61326-2-6:2021 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-64:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-64부: 상업용 전기주방기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-57:2011 |
Medical electrical equipment –
Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Measuring distance: 1 500 ㎜
5. Measuring power: 10 ㎼ - 300 W |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-64:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-64부: 상업용 전기주방기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-62:2013 |
Medical electrical equipment –
Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
(Exception)
201.4.101 Ultrasound measurements
201.10 Protection against unwanted and excessive radiation HAZARDS
201.12.1 Accuracy of controls and instruments
201.12.4 Protection against hazardous output |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 61547:2023 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-65:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-65부: 공기 청정기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와유사한 위험
부속서 AA 자외선복사전처리 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-63:2012 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 80601-2-30:2019 |
Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸, AD ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-65:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-65부: 공기 청정기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와유사한 위험
부속서 AA 자외선복사전처리 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-63:2012 +AMD1:2017 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 80601-2-49:2019 |
Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-7:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-7부: 세탁기의 개별 요구사항
(제외항목)
18.101, 18.102 문 개폐시험
22.104 문 개폐시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
Annex CC 무세제 전해조 세탁기 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-63:2012 +AMD1:2017 +AMD2:2021 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN IEC 80601-2-60:2020 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-75:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-75부: 상업용 디스펜싱기기 및 자동판매기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 AA 탄성체에 대한 노화 시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-65:2012 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: 35 ㎸p – 160 ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: 0.1 ㎃s – 9 999 ㎃s
6. Measuring current: 0.1 ㎃ – 3 000 ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| EN ISO 80601-2-61:2019 |
Medical electrical equipment –
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-8:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-8부: 면도기, 이발기 및 이와 유사한 전기기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 C 전동기의 노화 시험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-65:2012 +AMD1:2017 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-1 V2.1.1(2017-02) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 1: Common technical requirements; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU
(Exception)
9.6 Transients and surges in the vehicular environment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-80:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-80부: 전기 팬의 개별요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-65:2012 +AMD1:2017 +AMD2:2021 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment |
1. Test voltage:
- Single phase: max. 500 Vac
- Three phase: max. 500 Vac
2. Measuring tube voltage: (35 ~ 160) ㎸p
3. Measuring luminance: 1 500 ㏓
4. Measuring radiation dosage: 15 n㏉ – 1 000 ㏉
5. Measuring current time: (0.1 ~ 9 999) ㎃s
6. Measuring current: (0.1 ~ 3 000) ㎃
7. Measuring angle: 90° |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-1 V2.2.3(2019-11) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 1: Common technical requirements; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-84:2022 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-84부: 화장실용 전기기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-66:2019 |
Medical electrical equipment –
Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-17 V2.2.1(2012-09) |
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility(EMC) standard for radio equipment;
Part 17: Specific conditions for Broadband Data Transmission Systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-89:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-89부: 내장형 또는 원격 냉각 압축기를 가진 상업용 냉동기기의 개별 요구사항
(제외항목)
22.107 인화성 냉매관련 시험장비 (IEC 60079-15)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 B 방폭 “n” 전기 장치 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-83:2019 |
Medical electrical equipment –
Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment
(Exception)
201.6.101 Protection against optical radiation - Classification to IEC 62471 |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-17 V3.1.1(2017-02) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-9:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-9부: 토스터, 그릴, 로스터 및 이와 유사한 휴대용 조리기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 60601-2-83:2019 +AMD1:2022 |
Medical electrical equipment –
Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment
(Exception)
201.6.101 Protection against optical radiation - Classification to IEC 62471 |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-17 V3.2.4(2020-09) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-90:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-90부: 상업용 전자레인지의 개별 요구 사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 BB 가열실 문이 없고 컨베이어형 수단이 있는 상업용 전자레인지에 대한 요구사항
부속서 EE 선박에서 사용하도록 만들어진 전자레인지 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-30:2018 |
Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
(Exception)
201.15. 3.5.101 Shock and vibration for other than transport
201.15.3.5.102 Shock and vibration for transport |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-17 V3.2.5(2022-08) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-90:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-90부: 상업용 전자레인지의 개별 요구 사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 BB 가열실 문이 없고 컨베이어형 수단이 있는 상업용 전자레인지에 대한 요구사항
부속서 EE 선박에서 사용하도록 만들어진 전자레인지 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-49:2018 |
Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-17 V3.2.6(2023-06) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-98:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-98부: 전기 가습기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-60:2019 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-17 V3.3.1(2024-09) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband and Wideband Data Transmission Systems; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 60335-2-98:2025 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-98부: 전기 가습기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-77:2019 |
Medical electrical equipment –
Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-24 V1.5.1(2010-10) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services;
Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radio and ancillary equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 62368-1:2021 |
오디오/비디오, 정보통신기술기기 –
제1부: 안전요구사항
(제외항목)
10 방사선
부속서 C 자외선
부속서 G 부품
G.1 스위치
G.2 릴레이
G.7 주전원코드
G.15 가압 액체로 채워진 부품
부속서 J 중간절연 없이 사용하기 위한 절연 권선 전선
부속서 M 배터리를 포함하고 있는 기기와 보호 회로
M.7 납축(납 산성) 및 니켈 카드뮴 배터리의 폭팔 위험
M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 S 내열 및 내화성 시험
S.3 방화용 엔클로저의 밑면에 대한 난연성 시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 절연저항: max.999.9 ㏁
6. 토오크: max.8 N·m
7. 습도: max.95 % R.H.
8. 질량: max.100 ㎏
9. 내전압: max.10 ㎸
10. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-77:2019 +AMD1:2023 |
Medical electrical equipment –
Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-25 V2.3.2(2005-07) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services;
Part 25: Specific conditions for CDMA 1x spread spectrum Mobile Stations and ancillary equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KC 62368-1:2025 |
오디오/비디오, 정보통신기술기기 –
제1부: 안전요구사항
(제외항목)
10 방사선
부속서 C 자외선
부속서 G 부품
G.1 스위치
G.2 릴레이
G.7 주전원코드
G.15 가압 액체로 채워진 부품
부속서 J 중간절연 없이 사용하기 위한 절연 권선 전선
부속서 M 배터리를 포함하고 있는 기기와 보호 회로
M.7 납축(납 산성) 및 니켈 카드뮴 배터리의 폭팔 위험
M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 S 내열 및 내화성 시험
S.3 방화용 엔클로저의 밑면에 대한 난연성 시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 절연저항: max.999.9 ㏁
6. 토오크: max.8 N·m
7. 습도: max.95 % R.H.
8. 질량: max.100 ㎏
9. 내전압: max.10 ㎸
10. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| IEC 80601-2-78:2019 |
Medical electrical equipment –
Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
(Exception)
211.10.1.1 General requirements for mechanical strength - Shock and Broadband random vibration test |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-26 V2.3.2(2005-07) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services;
Part 26: Specific conditions for CDMA 1x spread spectrum Base Stations, repeaters and ancillary equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60065:2014 |
오디오, 비디오 및 이와 유사한 전자기기의 안전 요구사항
(제외항목)
6 위험방사
8.17 추가적인 삽입절연 없이사용하는 절연권선에 대한 요구사항
14.2.1, 14.2.2, 14.2.3 IEC 60384-14에 따른 커패시터와 RC- units에 대한 시험
14.6 스위치
16 외부유연성 코드
18 브라운관의 기계적 강도 및 폭축의 영향에 대한보호
20.1.3 인쇄회로기판
부속서 H 사이에 끼우는 절연없이 사용하는 절연된 권선용전선
부속서 L 사진을 목적으로하는 전자플래시 기기에대한 추가 요구사항 |
1. 시험전압:
- 단상: max.300 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 절연저항: max.999.9 ㏁
6. 토오크: max.8 N·m
7. 습도: max.95 % R.H.
8. 질량: max.100 ㎏
9. 내전압: max.10 ㎸
10. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-12:2011 |
Medical electrical equipment –
Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy
201.15.3.5.101.1 Shock and vibration
201.15.3.5.101.2 Shock and vibration for a MOBILE VENTILATOR |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-3 V1.6.1(2013-08) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 3: specific conditions for Short-Range Devices(SRD) operating on frequencies between 9 ㎑ and 246 ㎓ |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-1:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제1부: 일반 요구사항
(제외항목)
22.16 자동식코드릴시험
22.32 산소용기
22.46 소프트웨어평가 시험
22.48 KS C IEC 61770 시험
24.1.1 캐패시터시험(KS C IEC 60384-14)
24.1.2 안전절연변압기(KS C IEC 61558-2-6)
24.1.3 스위치시험(KS C IEC 61058-1)
24.1.4 자동조절기시험(6.10 and 6.11 of KS C IEC 60730-1)
24.1.7 통신인터페이스 회로시험(KS C IEC 62151)
24.1.8 온도퓨즈 시험( KS C IEC 60691)
24.1.9 릴레이(clause 17 of KS C IEC 60730-1)
24.4 전열소자용단자로 사용하는 플러그 등 시험(IEC/TR 60083 or IEC 60906-1, KS C IEC 60320-1)
24.7 호스세트 시험(KS C IEC 61770)
부속서 F 커패시터
부속서 H 스위치
부속서 J 피복된 인쇄회로기판
부속서 R 소프트웨어 평가
부속서 T 비금속 재료에 대한 UV-C 방사 효과 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-12:2020 |
Medical electrical equipment –
Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy
201.15.3.5.101.1 Shock and vibration (robustness)
201.15.3.5.101.2 Shock and vibration for a transit-operable ventilator during operation |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-3 V2.1.1(2019-03) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 3: specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 ㎑ and 246 ㎓; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-11:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-11부: 회전식 건조기의 개별 요구사항
(제외항목)
18.101, 18.102 문 개폐시험
22.104 문 개폐시험
Annex CC 보호 "n" 유형의 장비 보호 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-55:2018 |
Medical electrical equipment –
Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
(Exception)
201.15.3.5.101 Additional requirements for shock and vibration |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-3 V2.3.1(2022-11) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-14:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-14부: 주방기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
33 제품 성능
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-56:2017 |
Medical electrical equipment –
Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-3 V2.3.2(2023-01) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised Standard for ElectroMagnetic Compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-15:2018 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-15부: 액체 가열용 전기기기의 개별 요구사항
(제외항목)
22.103 무선제품시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-56:2017 +AMD1:2018 |
Medical electrical equipment –
Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-33 V2.2.1(2019-04) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-16:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-16부: 음식물 쓰레기 처리기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-61:2017 |
Medical electrical equipment –
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
(Exception)
201.10 Protection against unwanted and excessive radiation HAZARDS - Laser
201.15.3.5.101.1 Shock and vibration
201.15.3.5.101.2 Shock and vibration for professional transport |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-34 V2.1.1(2019-04) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 34: Specific conditions for External Power Supply (EPS) for mobile phones; Harmonised Standard covering the essential requirements of article 6 of Directive 2014/30/EU |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 6 000 ㎒,
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-2:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-2부: 전기 진공청소기 및 물흡입 청소기의 개별 요구사항
(제외항목)
21 기계적 강도
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. 인가에너지: max.5 J |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-69:2014 |
Medical electrical equipment –
Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-50 V2.2.1(2019-04) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication Base Station(BS), repeater and ancillary equipment; Harmonised Standard covering the essential requirements of article |
RE: 30 MHz ~ 6 GHz,
CE: 150 kHz ~ 30 MHz,
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 690 ㎒,
10 V/m, 690 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-21:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-21부: 전기온수기의 개별요구사항
(제외항목)
24.102.1 자동온도조절기시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-69:2020 |
Medical electrical equipment –
Part 2-69: Particular requirements for the basic safety and essential performance of oxygen concentrator equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-50 V2.3.1(2021-03) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
RE: 30 MHz ~ 6 GHz,
CE: 150 kHz ~ 30 MHz,
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 690 ㎒,
10 V/m, 690 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-23:2019 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-23부: 피부 손질 또는 모발 손질용 전기기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-70:2015 |
Medical electrical equipment –
Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-50 V2.4.1(2025-09) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility |
RE: 30 MHz ~ 6 GHz,
CE: 150 kHz ~ 30 MHz,
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 690 ㎒,
10 V/m, 690 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-24:2017 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-24부 : 전기 냉장고, 아이스크림 기기 및 제빙기의 개별 요구사항
(제외항목)
19.105 배터리 동작기기 관련 시험 장비
22.108 인화성 냉매관련 시험장비 (IEC 60079-15)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 CC 비점화 “n”전기장치 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-70:2020 |
Medical electrical equipment –
Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-52 V1.1.0(2016-11) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication Mobile and portable (UE) radio and ancillary equipment; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
(Exception)
Mobile devices |
RE: 30 MHz ~ 6 GHz
CE: 150 kHz ~ 30 MHz
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-25:2020 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-25부: 전자레인지의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 BB 선상에서 사용하도록 만들어진 전자레인지 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-72:2015 |
Medical electrical equipment –
Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-52 V1.2.1(2021-11) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Mobile devices |
RE: 30 MHz ~ 6 GHz
CE: 150 kHz ~ 30 MHz
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-29:2016 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-29부: 배터리 충전기의 개별 요구사항
(제외항목)
21.102 진동시험
32 방사선, 유독성 및 이와 유사한 위험성 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-74:2017 |
Medical electrical equipment –
Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-52 V1.3.1(2024-11) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility
(Exception)
Mobile devices |
RE: 30 MHz ~ 6 GHz
CE: 150 kHz ~ 30 MHz
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-3:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-3부: 전기 다리미의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
33 제품 성능
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-74:2021 |
Medical electrical equipment –
Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 Hz
4. Temperature: max. 200 °C
5. Insulation resistance: max. 999.9 MΩ
6. Torque: max. 8 N∙m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 kg
9. Dielectric strength: max. 10 kV
10. Leakage current: max. 10 mA |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-7 V1.3.1(2005-11) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 7: specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS) |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-30:2009 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-30부: 실내용 난방기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
33 제품 성능
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-79:2018 |
Medical electrical equipment –
Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-9 V1.4.1(2007-11) |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Electro Magnetic Compatibility (EMC) standard for radio equipment and services;
Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-31:2018 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-31부: 레인지 후드의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-80:2018 |
Medical electrical equipment –
Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ETSI EN 301 489-9 V2.1.1(2019-04) |
ElectroMagnetic Compatibility(EMC) standard for radio equipment and services;
Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-32:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-32부: 전기 마사지 기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-84:2020 |
Medical electrical equipment –
Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy
201.15.3.5.101 Additional requirements for rough handling - Broadband random vibration test |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ICES-001 Issue 5 |
Industrial, Scientific and Medical (ISM) Equipment |
CE: 0.009 ㎒ ~ 30 ㎒
RE: 0.009 ㎒ ~ 18 ㎓ |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-35:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-35부: 순간온수기의 개별 요구사항
(제외항목)
3.104 노출 전열 소자 온수기
22.47 수압 시험
22.103 압력 경감 장치
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-87:2021 |
Medical electrical equipment –
Part 2-87: Particular requirements for the basic safety and essential performance of high frequency ventilators
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy
201.15.3.5.101 Additional requirements for rough handling - Shock and Broadband random vibration test |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ICES-003 Issue 7 |
Information Technology Equipment (including Digital Apparatus) |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 40 ㎓ |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-36:2017 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-36부 : 상업용 전기 조리레인지, 오븐, 호브 및 호브소자에 대한 개별요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 의료기기 |
| ISO 80601-2-90:2021 |
Medical electrical equipment –
Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment
(Exception)
201.9.6.2.1.101 Additional requirements for audible acoustic energy |
1. Test voltage:
- Single phase: max. 300 Vac
- Three phase: max. 440 Vac
2. Current: max. 30 A
3. Frequency: max. 65 ㎐
4. Temperature: max. 200 ℃
5. Insulation resistance: max. 999.9 ㏁
6. Torque: max. 8 N·m
7. Humidity: max. 95 % R.H.
8. Mass: max. 100 ㎏
9. Dielectric strength: max. 10 ㎸
10. Leakage current: max. 10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| ICES-005 Issue 5 |
Lighting Equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 1 ㎓ |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-37:2017 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-37부: 상업용 전기 튀김기 및 전기 도너츠 튀김기에 대한 개별요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-1-2:2007 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility – Requirements and tests |
CE: 9 k㎐ ~ 30 ㎒
RE: 9 k㎐ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-38:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-38부: 상업용 전기 그리들 및 그리들 그릴에 대한 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-1-2:2014 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-39:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-39부: 상업용 전기 다목적 조리팬의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-1-2:2014 +A1:2020 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒ |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-40:2018 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-40부: 히트펌프, 에어컨디셔너 및 제습기의 개별 요구사항
(제외항목)
22.108 진공압력시험
22.127 UV-C 외부조사 시험
22.128 UV-C 복사조도 시험
22.129 UV-C 스펙트림 조사량 시험
23.101 UV-C 노출 내부배선 시험
32 방사선, 유독성 및 이와 유사한 위험성
부속서 CC 가연성 냉매를 사용하는 장치의 수송, 마킹 및 저장
부속서 KK A2L의 고온 점화 온도 시험 방법
부속서 LL A2L 냉매용 냉매 검출 시스템
부속서 MM 냉매 센서 위치 확인 테스트
부속서 NN A2L 냉매에 대한 화염 안전장치 검증 테스트
부속서 OO 자외선 복사 조절 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-10:2012 +AMD1:2016 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-42:2009 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-42부: 상업용 전기 강제 대류형 오븐, 스팀형 조리기 및 스팀 대류형 오븐의 개별 요구사항
(제외항목)
30.101 HBF 재료 분류용 KS M ISO 9772에 규정된 요구사항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-10:2012 +AMD1:2016 +AMD2:2023 |
Medical electrical equipment –
Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-43:2017 |
가정용 및 이와 유사한 전기기기의 안전성 –
제 2-43부 : 옷건조기 및 타올걸이의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-18:2009 |
Medical electrical equipment –
Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-45:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-45부: 휴대형 가열기기 및 이와 유사한 전기기기의 개별 요구사항
(제외항목)
11.3 백금저항
32 방사선, 유독성 및 이와 유사한 위험
33 제품 성능
부속서 B 전기 다리미의 성능 시험 방법
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-19:2009 +AMD1:2016 |
Amendment 1 – Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-47:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-47부: 상업용 전기 끓임 팬의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-19:2020 |
Medical electrical equipment –
Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-49:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-49부: 상업용 전기 보온기기의 개별 요구사항
(제외항목)
11.3 백금저항
32 방사선, 유독성 및 이와 유사한 위험
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-2:2009 +COR1:2014 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-5:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-5부: 전기 식기세척기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
33 제품 성능
부속서 R 소프트웨어 평가
부속서 BB 고무 부분의 수명
부속서 CC 전기 야채 세척기의 제품 성능 기준 및 시험방법 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-2:2017 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-50:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-50부: 상업용 전기 이중 냄비의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-20:2020 |
Medical electrical equipment –
Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-58:2017 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-58부: 상업용 전기 식기세척기의 개별 요구사항
(제외항목)
3.5.102 브러시 기기
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 AA 엘라스토메릭 부분에 대한 열화 시험
부속서 BB 역류 방지를 위한 요구사항 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-21:2020 |
Medical electrical equipment –
Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-59:2009 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-59부: 전기살충기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-24:2012 |
Medical electrical equipment –
Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-6:2018 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-6부: 거치형 조리레인지, 호브, 오븐 및 이와 유사한 기기의 개별 요구사항
(제외항목)
22.135 선상 파동시험 요구 조건
22.136 선상 진동시험 요구 조건
32 방사선, 유독성 및 이와 유사한 위험성
33 제품 성능
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-25:2011 |
Medical electrical equipment –
Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-64:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-64부: 상업용 전기주방기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-27:2011 |
Medical electrical equipment –
Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-65:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-65부: 공기 청정기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와유사한 위험
부속서 AA 자외선복사전처리 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-28:2010 |
Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-75:2018 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-75부: 상업용 디스펜싱기기 및 자동판매기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 AA 탄성체에 대한 노화 시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-28:2017 |
Medical electrical equipment –
Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-8:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-8부: 면도기, 이발기 및 이와 유사한 전기기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
33 제품 성능
부속서 C 전동기의 노화 시험
부속서 D 전기 면도기의 성능 시험방법
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-34:2011 |
Medical electrical equipment –
Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-80:2015 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-80부: 전기 팬의 개별요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-37:2007 +AMD1:2015 |
Amendment 1 – Medical electrical equipment –
Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202.6 Electromagnetic compatibility |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-84:2019 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-84부: 화장실용 전기기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-4:2010 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-85:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-85부: 직물용 전기 스티머에 대한 개별 요구 사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-4:2010 +AMD1:2018 |
Medical electrical equipment –
Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-89:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-89부: 내장형 또는 원격 냉각 압축기를 가진 상업용 냉동기기의 개별 요구사항
(제외항목)
22.107 인화성 냉매관련 시험장비 (IEC 60079-15)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 BB 방폭 “n” 전기 장치 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃
10. Pressure: max.3.5 ㎫ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-44:2009 +AMD1:2012 +AMD2:2016 |
Medical electrical equipment –
Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒,
ISM bands: 6 V
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-9:2012 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-9부: 토스터, 그릴, 로스터 및 이와 유사한 휴대용 조리기기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-47:2012 |
Medical electrical equipment –
Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-90:2019 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-90부: 상업용 전자레인지의 개별 요구 사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가
부속서 BB 가열실 문이 없고 컨베이어형 수단이 있는 상업용 전자레인지에 대한 요구사항
부속서 EE 선박에서 사용하도록 만들어진 전자레인지 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.480 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 내전압: max.10 ㎸
8. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-49:2011 |
Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60335-2-98:2008 |
가정용 및 이와 유사한 전기기기의 안전성 –
제2-98부: 전기 가습기의 개별 요구사항
(제외항목)
32 방사선, 유독성 및 이와 유사한 위험성
부속서 R 소프트웨어 평가 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 토오크: max.8 N·m
6. 습도: max.95 % R.H.
7. 질량: max.100 ㎏
8. 내전압: max.10 ㎸
9. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-5:2009 |
Medical electrical equipment –
Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 60950-1:2013 |
정보기술기기의 안전성 –
제1부: 일반 요구사항
(제외항목)
2.8.7.3 내구성 시험
3.2.5.1 AC 전원 코드
4.2.8 브라운관
4.3.12 가연성 액체
4.3.13.2 이온화 방사
4.3.13.3 재질에 대한 자외선 영향
4.3.13.4 자외선의 인체 노출
4.3.13.5 레이저 (LED 포함)
6.3 전기통신 배선 시스템의 과열 방지
7 케이블 분배 시스템에 연결
부속서 A.3 점화유 시험
부속서 H 이온화방사
부속서 U 중간 절연 없는 절연 권선 전선
부속서 Y 자외선 처리시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 절연저항: max.999.9 ㏁
6. 토오크: max.8 N·m
7. 습도: max.95 % R.H.
8. 질량: max.100 ㎏
9. 내전압: max.10 ㎸
10. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-52:2009 +AMD1:2015 |
Amendment 1 – Medical electrical equipment –
Part 2-52: Particular requirements for the basic safety and essential performance of medical beds
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 62368-1:2018 |
오디오/비디오, 정보통신기술기기 –
제1부: 안전요구사항
(제외항목)
10 방사선
부속서 C 자외선
부속서 G 부품
G.1 스위치
G.2 릴레이
G.7 주전원코드
G.15 가압 액체로 채워진 부품
부속서 J 중간절연 없이 사용하기 위한 절연 권선 전선
부속서 M 배터리를 포함하고 있는 기기와 보호 회로
M.7 납축(납 산성) 및 니켈 카드뮴 배터리의 폭팔 위험
M.8 수성 전해액 배터리의 외부 스파크 원으로부터 내부 점화에 대한 보호
부속서 S 내열 및 내화성 시험
S.3 방화용 엔클로저의 밑면에 대한 난연성 시험 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 절연저항: max.999.9 ㏁
6. 토오크: max.8 N·m
7. 습도: max.95 % R.H.
8. 질량: max.100 ㎏
9. 내전압: max.10 ㎸
10. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-54:2009 +AMD1:2015 |
Amendment 1 – Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒,
ISM bands: 6 V
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ▶ 가정용 전기기기 |
| KS C IEC 62368-3:2017 |
오디오/비디오, 정보통신기술기기 –
제3부: 통신 케이블과 포트를 통한 DC 전력 전송의 안전 측면 |
1. 시험전압:
- 단상: max.300 Vac
- 삼상: max.440 Vac
2. 전류: max.30 A
3. 주파수: max.65 ㎐
4. 온도: max.200 ℃
5. 절연저항: max.999.9 ㏁
6. 토오크: max.8 N·m
7. 습도: max.95 % R.H.
8. 질량: max.100 ㎏
9. 내전압: max.10 ㎸
10. 누설전류: max.10 ㎃ |
소재지 |
| ▶ 전자기적합성 |
| IEC 60601-2-54:2009 +AMD1:2015 +AMD2:2018 |
Amendment 1 – Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸,
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60601-2-54:2022 |
Medical electrical equipment –
Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸,
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60601-2-62:2013 |
Medical electrical equipment –
Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60601-2-63:2012 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60601-2-63:2012 +AMD1:2017 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60601-2-63:2012 +AMD1:2017 +AMD2:2021 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒ |
소재지 |
| IEC 60601-2-65:2012 +AMD1:2017 |
Amendment 1 – Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60601-2-65:2012 +AMD1:2017 +AMD2:2021 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 60947-1:2020 |
Low-voltage switchgear and controlgear –
Part 1: General rules
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Tests for EMC |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-1:2020/COR1:2022 |
Low-voltage switchgear and controlgear –
Part 1: General rules
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Tests for EMC |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-1:2020/COR2:2024 |
Low-voltage switchgear and controlgear –
Part 1: General rules
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Tests for EMC |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 6 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-3:2020 |
Low-voltage switchgear and controlgear –
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Electromagnetic compatibility tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒ |
소재지 |
| IEC 60947-3:2020 +AMD1:2025 |
Low-voltage switchgear and controlgear –
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Electromagnetic compatibility tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-3:2020/COR1:2021 |
Low-voltage switchgear and controlgear –
Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
8.3 ElectroMagnetic Compatibility(EMC)
9.4 Electromagnetic compatibility tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒ |
소재지 |
| IEC 60947-4-1:2023 |
Low-voltage switchgear and controlgear –
Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters
8.3 ElectroMagnetic Compatibility(EMC)
9.4 EMC tests
(Exception)
9.4.2.10 Harmonics in the supply |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-4-2:2020 |
Low-voltage switchgear and controlgear –
Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters
8.3 EMC requirements
9.4 EMC tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-4-2:2020 +AMD1:2024 |
Low-voltage switchgear and controlgear –
Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters
8.3 EMC requirements
9.4 EMC tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-4-3:2020 |
Low-voltage switchgear and controlgear –
Part 4-3: Contactors and motor-starters – Semiconductor controllers and semiconductor contactors for non-motor loads
8.3 EMC requirements
9.4 EMC tests |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 60947-5-2:2019 |
Low-voltage switchgear and controlgear –
Part 5-2: Control circuit devices and switching elements – Proximity switches
8.2.6 ElectroMagnetic Compatibility(EMC)
9.6 Verification of the electromagnetic compatibility |
Current: ≤ 32 A per Phase
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 ㎓
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 6 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Interruptions: 0 % |
소재지 |
| IEC 61000-3-11:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current ≤ 75 A and subjet to conditional connection |
≤75 A |
소재지 |
| IEC 61000-3-12:2011 |
ElectroMagnetic Compatibility(EMC) –
Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase |
>16 A and ≤75 A |
소재지 |
| IEC 61000-3-12:2011 +AMD1:2021 |
ElectroMagnetic Compatibility(EMC) –
Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase |
>16 A and ≤75 A |
소재지 |
| IEC 61000-3-2:2014 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤16 A |
소재지 |
| IEC 61000-3-2:2018 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤16 A |
소재지 |
| IEC 61000-3-2:2018 +AMD1:2020 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤16 A |
소재지 |
| IEC 61000-3-2:2018 +AMD1:2020 +AMD2:2024 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: Limits – Limits for harmonic current emissions (equipment input current <= 16A per phase) |
≤16 A |
소재지 |
| IEC 61000-3-3:2013 +AMD1:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A phase and not subject to conditional connection |
≤16 A |
소재지 |
| IEC 61000-3-3:2013 +AMD1:2017 +AMD2:2021 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A phase and not subject to conditional connection |
≤16 A |
소재지 |
| IEC 61000-4-11:2004 +AMD1:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
(0 ~ 100) % |
소재지 |
| IEC 61000-4-11:2020 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
(0 ~ 100) % |
소재지 |
| IEC 61000-4-13:2002 +AMD1:2009 +AMD2:2015 |
ElectroMagnetic Compatibility(EMC) –
Part 4-13: Testing and measurement techniques – Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
≤2 ㎑ at 50 ㎐,
≤2.4 ㎑ at 60 ㎐
≤75 A |
소재지 |
| IEC 61000-4-17:1999 +AMD1:2001 +AMD2:2008 |
ElectroMagnetic Compatibility(EMC) –
Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test |
≤360 V, ≤25 A |
소재지 |
| IEC 61000-4-2:2008 |
ElectroMagnetic Compatibility(EMC) –
Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
±(2 ~ 15) ㎸ |
소재지 |
| IEC 61000-4-29:2000 |
ElectroMagnetic Compatibility(EMC) –
Part 4-29: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
≤75 A |
소재지 |
| IEC 61000-4-3:2006 +AMD1:2007 +AMD2:2010 |
ElectroMagnetic Compatibility(EMC) –
Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
10 V/m, 80 ㎒ ~ 6 000 ㎒ |
소재지 |
| IEC 61000-4-3:2020 |
ElectroMagnetic Compatibility(EMC) –
Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
10 V/m, 80 ㎒ ~ 6 000 ㎒ |
소재지 |
| IEC 61000-4-34:2005 +AMD1:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
>16 A and ≤75 A |
소재지 |
| IEC 61000-4-34:2005 +AMD1:2009 +AMD2:2025 |
ElectroMagnetic Compatibility(EMC) –
Part 4-34: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase |
>16 A and ≤75 A |
소재지 |
| IEC 61000-4-4:2012 |
ElectroMagnetic Compatibility(EMC) –
Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
±(0.25 ~ 4) ㎸ |
소재지 |
| IEC 61000-4-5:2014 |
ElectroMagnetic Compatibility(EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test |
±(0.5 ~ 4) ㎸ |
소재지 |
| IEC 61000-4-5:2014 +AMD1:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test |
±(0.5 ~ 4) ㎸ |
소재지 |
| IEC 61000-4-6:2013 |
ElectroMagnetic Compatibility(EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
10 V, 0.15 ㎒ ~ 230 ㎒ |
소재지 |
| IEC 61000-4-6:2023 |
ElectroMagnetic Compatibility(EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
10 V, 0.15 ㎒ ~ 230 ㎒ |
소재지 |
| IEC 61000-4-8:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test |
(1 ~30) A/m |
소재지 |
| IEC 61000-6-1:2016 |
ElectroMagnetic Compatibility(EMC) –
Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
(Exception)
Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21
Table 4 – Immunity requirements – Input and output AC power ports of IEC 61000-4-34 |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61000-6-2:2016 |
ElectroMagnetic Compatibility(EMC) –
Part 6-2: Generic standards – Immunity standard for industrial environments
(Exception)
Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21 |
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61000-6-3:2006 +AMD1:2010 |
Amendment 1 – ElectroMagnetic Compatibility(EMC) –
Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
(Exception)
Table 1 – 1.3 Enclosure Test facility: TEM Waveguide |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A |
소재지 |
| IEC 61000-6-3:2020 |
ElectroMagnetic Compatibility(EMC) –
Part 6-3: Generic standards - Emission standard for equipment in residential environments
(Exception)
Table 3 – Requirements for radiated emissions, enclosure port 3.2 TEM, 3.3 FAR |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A |
소재지 |
| IEC 61000-6-4:2006 +AMD1:2010 |
ElectroMagnetic Compatibility(EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments
(Exception)
Table 1 – 1.3 Enclosure Test facility: TEM Waveguide |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| IEC 61000-6-4:2018 |
ElectroMagnetic Compatibility(EMC) –
Part 6-4: Generic standards - Emission standard for industrial environments
(Exception)
Table 3 – Requirements for radiated emissions - enclosure port: TEM, FAR |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| IEC 61204-3:2016 |
Low-voltage switch mode power supplies –
Part 3: ElectroMagnetic Compatibility(EMC) |
CE: 0.15 ㎒ ~ 30 ㎒
RE, RFI: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 1 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61326-1:2012 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61326-1:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61326-2-6:2012 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61326-2-6:2020 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 000 ㎒ ~ 6 000 ㎒,
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61326-2-6:2025 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 2-6: Particular requirements – In vitro diagnostic (IVD) medical equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 000 ㎒ ~ 6 000 ㎒,
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61547:2009 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 61547:2020 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: ±15 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 80601-2-30:2009 +AMD1:2013 |
Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/Burst: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 80601-2-30:2018 |
Medical electrical equipment –
Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸,
AD ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 80601-2-49:2018 |
Medical electrical equipment –
Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment
201.17 Electromagnetic compatibility of me equipment and me system
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 80601-2-60:2012 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
201.17 Electromagnetic compatibility of me equipment and me system |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| IEC 80601-2-60:2019 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ISO 80601-2-12:2011 |
Medical electrical equipment –
Part 2-12: Particular requirements for the basic safety and essential performance of critical care ventilators
201.17 Electromagnetic compatibility of me equipment and me systems
201.17. 101 Additional requirements for electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ISO 80601-2-12:2020 |
Medical electrical equipment –
Part 2-12: Particular requirements for the basic safety and essential performance of critical care ventilators
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ISO 80601-2-55:2011 |
Medical electrical equipment –
Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 20 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ISO 80601-2-55:2018 |
Medical electrical equipment –
Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ISO 80601-2-61:2011 |
Medical electrical equipment –
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/Burst: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| ISO 80601-2-61:2017 |
Medical electrical equipment –
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| QCVN 112:2017/BTTTT |
National technical regulation on general electromagnetic compatibility for radio broadband data transmission equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| QCVN 118:2018/BTTTT |
National technical regulation on Electromagnetic compatibility of multimedia equipment –
Emission requirements
(Exception)
30 ㎒~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex H: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| QCVN 18:2022/BTTTT |
National technical regulation on Electromagnetic Compatibility for Radio Equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 6 000 ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| QCVN 96:2015/BTTTT |
National technical regulation on electromagnetic compatibility for Short Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 211:2010 |
Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
(Exception)
6.3.1.3 Class A group 2 equipment with a rated input power > 75 ㎸A
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.8 Electric welding equipment |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓ |
소재지 |
| SANS 213:2011 |
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 2 150 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
ERP: 0.9 ㎓~ 18 ㎓ |
소재지 |
| SANS 214-1:2009 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
7.3.7.2 Electric fence supply units |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| SANS 214-1:2020 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
7.3.7.2 Electric fence supply units |
CE: 0.15 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| SANS 214-2:2009 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus –
Part 2: Immunity – Product family standard |
ESD: ±8 ㎸
RS: 3 V/m, (80 ~ 1 000) ㎒
EFT: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, (0.15 ~ 230) ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 215:2009 |
Limits and methods of measurements of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
4.2 Insertion loss |
CE: 9 ㎑ ~ 30 ㎒
RE: (30 ~ 300) ㎒
RE(Electromagnetic): 9 ㎑ ~ 30 ㎒ |
소재지 |
| SANS 215:2019 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
9.3 Measurement instrumentation and methods: FAR, TEM |
CE: 9 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
RE(Loop): 9 ㎑ ~ 30 ㎒ |
소재지 |
| SANS 222:2009 |
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement |
CE: (0.15 ~ 30) ㎒
RE: (30 ~ 6 000) ㎒ |
소재지 |
| SANS 224:2010 |
Information technology equipment – Immunity characteristics – Limits and methods of measurement |
ESD: ±8 ㎸
RS: 3 V/m, (80 ~ 1 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, (0.15 ~ 80) ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 2332:2017 |
Electromagnetic compatibility of multimedia equipment – Emission Requirements
(Exception)
30 ㎒~ 1 ㎓ FAR Test methods and associated limits for radiated emissions
Annex I: Other test methods and associated limits for radiated emissions |
CE: 0.15 ㎒ ~ 2 150 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 1 ㎓ ~ 18 ㎓ |
소재지 |
| SANS 2335:2018 |
Electromagnetic compatibility of multimedia equipment – Immunity requirements
(Exception)
4.2.2.2 Continuous RF electromagnetic field disturbances IEC 61000-4-20:2010 or IEC 61000-4-21:2011 |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
RS(spot test): 3 V/m, (1 800, 2 600, 3 500, 5 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 60601-1-2:2014 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance – Collateral standard: electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 60601-1-2:2022 |
Medical electrical equipment –
Part 1-2: General requirements for basic safety and essential performance – Collateral Standard: Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 60601-2-2:2019 |
Medical electrical equipment –
Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic disturbances – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 60601-2-63:2019 |
Medical electrical equipment –
Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) %
Proximity magnetic fields: 8 A/m ~ 65 A/m, 30 ㎑ ~ 13.56 ㎒ |
소재지 |
| SANS 60601-2-65:2019 |
Medical electrical equipment –
Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment
201.17 Electromagnetic compatibility of me equipment and me systems
202 Electromagnetic compatibility – Requirements and tests |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 2 500 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 61000-3-11:2003 |
ElectroMagnetic Compatibility(EMC) –
Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current ≤ 75 A and subjet to conditional connection |
≤75 A |
소재지 |
| SANS 61000-3-12:2012 |
ElectroMagnetic Compatibility(EMC) –
Part 3-12: Limits – Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase |
>16 A and ≤75 A |
소재지 |
| SANS 61000-3-2:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 3-2: Limits – Limits for harmonic current emissions (equipment input current ≤16 A per phase) |
≤16 A |
소재지 |
| SANS 61000-3-3:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 3-3: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection |
≤16 A |
소재지 |
| SANS 61000-4-11:2005 |
ElectroMagnetic Compatibility(EMC) –
Part 4-11: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations immunity tests |
(0 ~ 100) % |
소재지 |
| SANS 61000-4-2:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-2: Testing and measurement techniques – Electrostatic discharge immunity test |
±(2 ~ 15) ㎸ |
소재지 |
| SANS 61000-4-3:2008 |
ElectroMagnetic Compatibility(EMC) –
Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test |
10 V/m, 80 ㎒ ~ 6 000 ㎒ |
소재지 |
| SANS 61000-4-4:2011 |
ElectroMagnetic Compatibility(EMC) –
Part 4-4: Testing and measurement techniques – Electrical fast transient/burst immunity test |
±(0.25 ~ 4) ㎸ |
소재지 |
| SANS 61000-4-5:2006 |
ElectroMagnetic Compatibility(EMC) –
Part 4-5: Testing and measurement techniques – Surge immunity test |
±(0.5 ~ 4) ㎸ |
소재지 |
| SANS 61000-4-6:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
10 V, 0.15 ㎒ ~ 230 ㎒ |
소재지 |
| SANS 61000-4-6:2017 |
ElectroMagnetic Compatibility(EMC) –
Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields |
10 V, 0.15 ㎒ ~ 230 ㎒ |
소재지 |
| SANS 61000-4-8:2009 |
ElectroMagnetic Compatibility(EMC) –
Part 4-8: Testing and measurement techniques – Power frequency magnetic field immunity test |
(1 ~ 30) A/m |
소재지 |
| SANS 61000-6-1:2005 |
ElectroMagnetic Compatibility(EMC) –
Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
(Exception)
Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21
Table 4 – Immunity requirements – Input and output AC power ports of IEC 61000-4-34 |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 61000-6-2:2005 |
ElectroMagnetic Compatibility(EMC) –
Part 6-2: Generic standards – Immunity standard for industrial environments
(Exception)
Table 1 – Immunity requirements – Enclosure port of IEC 61000-4-20, IEC 61000-4-22, IEC 61000-4-21 |
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 10 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 61000-6-3:2011 |
ElectroMagnetic Compatibility(EMC) –
Part 6-3: Generic standards – Emission standard for equipment in residential environments
(Exception)
Table 3 – Requirements for radiated emissions, enclosure port 3.2 TEM, 3.3 FAR |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒
F/H: ≤75 A |
소재지 |
| SANS 61000-6-4:2011 |
ElectroMagnetic Compatibility(EMC) –
Part 6-4: Generic standards – Emission standard for industrial environments
(Exception)
Table 3 – Requirements for radiated emissions - enclosure port: TEM, FAR |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 30 ㎒ ~ 6 000 ㎒ |
소재지 |
| SANS 61204-3:2012 |
Low-voltage switch mode power supplies, d.c. output –
Part 3: ElectroMagnetic Compatibility(EMC) |
CE: 0.15 ㎒ ~ 30 ㎒
RE, RFI: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 2 000 ㎒,
1 V/m, 2 000 ㎒ ~ 2 700 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 1 V, 0.15 ㎒ ~ 80 ㎒
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 61326-1:2007 |
Electrical equipment for measurement, control and laboratory use – EMC requirements –
Part 1: General requirements |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 18 ㎓
F/H: ≤75 A
ESD: ±8 ㎸
RS: 10 V/m, 80 ㎒ ~ 1 000 ㎒,
3 V/m, 1 400 ㎒ ~ 6 000 ㎒,
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 61547:2012 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 61547:2021 |
Equipment for general lighting purposes – EMC immunity requirements |
ESD: ±8 ㎸
RS: 3 V/m, 80 ㎒ ~ 1 000 ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, 0.15 ㎒ ~ 80 ㎒
MS: 3 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 80601-2-60:2022 |
Medical electrical equipment –
Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| SANS 80601-2-61:2022 |
Medical electrical equipment –
Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
201.17 Electromagnetic compatibility of me equipment and me systems |
CE: 0.15 ㎑ ~ 30 ㎒
RE: 30 ㎒ ~ 1 000 ㎒
F/H: ≤75 A
ESD: CD ±8 ㎸
AD: ±15 ㎸
RS: 10 V/m, 80 ㎒ ~ 2 700 ㎒
RS(Proximity fields): 9 V/m ~ 28 V/m, 385 ㎒ ~ 5 785 ㎒
EFT/B: ±2 ㎸
Surge: ±2 ㎸
CS: 6 V, 0.15 ㎒ ~ 80 ㎒
MS: 30 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| TCN 68-196:2001 |
ElectroMagnetic Compatibility(EMC) Telecommunications Terminal Equipment Electromagnetic Immunity Requirements |
ESD: ± 8 ㎸
RS: 3 V/m, (80 ~ 1 000) ㎒
EFT/B: ±1 ㎸
Surge: ±2 ㎸
CS: 3 V, (0.15 ~ 80) ㎒
MS: 1 A/m
V-DIP: (0 ~ 100) % |
소재지 |
| TCVN 6988:2018 |
Industrial, scientific and medical equipment –
Radio-frequency disturbance characteristics - Limits and methods of measurement
(Exception)
6.3.2.3 Measurement at of distance of 30 m for group 2 class A equipment
7.6.7 Electric welding equipment |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 0.15 ㎒ ~ 18 ㎓ |
소재지 |
| TCVN 7186:2018 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(Exception)
9.3 Measurement instrumentation and methods: FAR, TEM |
CE: 9 ㎑ ~ 30 ㎒
RE: 9 ㎑ ~ 1 000 ㎒ |
소재지 |
| TCVN 7189:2009 |
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 30 ㎒
RE: 1 000 ㎒ ~ 6 000 ㎒ |
소재지 |
| TCVN 7492-1:2018 |
Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus –
Part 1: Emission
(Exception)
4.3.3.5 Electric fence |
CE: 0.009 ㎒ ~ 30 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 1 000 ㎒ |
소재지 |
| TCVN 7600:2010 (CISPR 13:2009) |
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement |
CE: 0.15 ㎒ ~ 2 150 ㎒
DP: 30 ㎒ ~ 300 ㎒
RE: 30 ㎒ ~ 6 ㎓
ERP: 0.9 ㎓ ~ 18 ㎓ |
소재지 |
