| ▶ 고무와 관련제품 |
| ISO 37:2024 |
Rubber, vulcanized or
thermoplastic —
Determination
of tensile stress-strain
properties |
Dumb-bells type 1A :
Tensile Strength
(0.1 ~ 50) MPa
Elongation at
Break
(0.1 ~ 1 000) % |
소재지 |
| ▶ 자동차 및 관련제품 |
49 CFR Section 571.109
-Standard No.109:2023 |
Standard No. 109; New pneumatic tires for vehicles manufactured from 1949 to 1975, bias ply tires, and T-type spare tires. |
Passenger Car Tires, Commercial Vehicle Tires |
소재지-1 |
49 CFR Section 571.119
-Standard No.119:2023 |
Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds), specialty tires, and tires for motorcycles. |
Passenger Car
Tires, Commercial Vehicle Tires |
소재지-1 |
49 CFR Section 571.139
-Standard No.139:2023 |
Standard No. 139; New pneumatic radial tires for light vehicles |
Passenger Car Tires |
소재지-1 |
| AIS 044:2004 |
Part1 : Automotive Vehicles – Pneumatic Tyres for Commercial Vehicles
(Exception)
6.6. Tire Uniformity Test
6.7. Tyre Stiffness Test
Part2 : Automotive Vehicles – Pneumatic Tyres for Passenger Car Vehicles
(Exception)
6.7. Tire Uniformity Test
6.8. Tyre Stiffness Test
|
Passenger Car Tires, Commercial Vehicle Tires |
소재지-1 |
| AIS-142:2019 |
Evaluation of Tyres with Regard to Rolling Sound Emissions and/or to Adhesion on Wet Surfaces and/or to Rolling Resistance
ANNEX-C Testing Procedure For Measuring Wet Grip
(Exception)
(A)-C1 category tyres
4.1 Testing method (a) using an instrumented passenger car
(B)-C2 and C3 category tyres
2.2 Standard vehicle procedure |
Adhesion on wet surface
: Class C1 tyres Load Index 77 ~ 121
: Class C2 tyres Load Index 88 ~ 121 |
소재지-2 |
| AIS-142:2019 |
Evaluation of Tyres with Regard to Rolling Sound Emissions and/or to Adhesion on Wet Surfaces and/or to Rolling Resistance
ANNEX-D (See 3.5) TEST PROCEDURE FOR MEASURING ROLLING RESISTANCE
(Exception)
1. Test Methods
b) in the torque method
c) in the deceleration method
d) in the power method
4.6 Measurement of parasitic losses
4.6.1 Skim Test Reading
b) Record the spindle Ft, input torque Tt, or the power, whichever applies
4.6.2 Deceleration method
5.1 Determination of parasitic losses
5.1.3 Torque method at drum axis
5.1.4 Power method at drum axis
5.1.5 Deceleration method
5.2 Rolling resistance calculation
5.2.3 Torque method at drum axis
5.2.4 Power method at drum axis
5.2.5 Deceleration method |
Rolling resistance coefficient
: Max. 50N/kN |
소재지-1 |
| GB/T 4501:2023 |
Laboratory test methods for truck and bus tyres capabilities |
Commercial Vehicle Tires |
소재지-1 |
| GB/T 4502:2023 |
Laboratory test methods for passenger car tyres capabilities |
Passenger Car Tires |
소재지-1 |
| GB/T 521:2023 |
Test method of measuring peripheral dimensions for tyres |
Passenger Car Tires, Commercial Vehicle Tires |
소재지-1 |
| GSO 52:2007 |
Standardization Organization for G.C.C (GSO) – Passenger car tyres
PART 2: GENERAL REQUIREMENTS
(Exception)
4.3 TENSILE STRENGTH AND ELONGATION TEST,
4.4 AGEING TEST |
Passenger Car Tires |
소재지-1 |
| GSO 53:2007 |
Standardization Organization for G.C.C (GSO) – Passenger car tyres
PART 3: METHODS OF TEST METHODS OF TEST
(Exception)
5. TENSILE STRENGTH AND ELONGATION TEST,
6. AGEING TEST |
Passenger Car Tires |
소재지-1 |
| GSO 646 :1996 |
Standardization Organization for (GSO) – Multi-Purpose vehicles, trucks, buses and trailers tyres
Part2 : Methods of test |
Commercial Vehicle Tires |
소재지-1 |
| GSO 646:2013 |
Standardization Organization for (GSO) – Multi-Purpose vehicles, trucks, buses and trailers tyres
Part2 : Methods of test |
Commercial Vehicle Tires |
소재지-1 |
| GSO 647 :1996 |
Standardization Organization for (GSO) – Multi-Purpose vehicles, trucks, buses and trailers tyres
Part3 : General requirements |
Commercial Vehicle Tires |
소재지-1 |
| GSO 647:2013 |
Standardization Organization for (GSO) – Multi-Purpose vehicles, trucks, buses and trailers tyres
Part3 : General requirements |
Commercial Vehicle Tires |
소재지-1 |
| IS 15633:2022 |
Indian Standard
AUTOMOTIVE VEHICLES - PNEUMATIC TYRES FOR PASSENGER CAR VEHICLES -DIAGONAL AND RADIAL PLY - SPECIFICATION |
Passenger Car Tires |
소재지-1 |
| IS 15636:2022 |
Indian Standard
AUTOMOTIVE VEHICLES - PNEUMATIC TYRES FOR COMMERCIAL VEHICLES – DIAGONAL AND RADIAL PLY SPECIFICATION |
Commercial Vehicle Tires |
소재지-1 |
| ISO 10191:2021 |
Passenger car tyres - Verifying tyre capabilities - Laboratory test methods |
Passenger Car Tires |
소재지-1 |
| ISO 10454:1993 |
Truck and bus tyres - Verifying tyre capabilities - Laboratory test methods |
Commercial Vehicle Tires |
소재지-1 |
| ISO 15222:2021 |
Truck and bus tyres-Method for measuring relative wet
grip performance -Loaded new tyres
(Exception)
6. Measurement of tyre wet grip on a standard vehicle |
Class C2 tyres
: Load Index 88 ~ 121 |
소재지-2 |
| ISO 23671:2021 |
Passenger car tyres-Method for measuring relative wet
grip performance-Loaded new tyres
(Exception)
6. Measurement of tyre wet grip on a standard vehicle |
Class C1 tyres
: Load Index 77 ~ 121 |
소재지-2 |
| ISO 28580:2018 |
Passenger car, truck and bus tyre rolling resistance
measurement method — Single point test and
correlation of measurement results
(Exception)
4. Test methods
b) Torque method
c) Deceleration method
d) Power method
7.6 Measurement of parasitic losses
7.6.2 Skim Test Reading
b) Record the spindle Ft, input torque Tt, or the power, whichever applies
7.6.3 Deceleration method
8.1 Determination of parasitic losses
8.1.3 Torque method at drum axis
8.1.4 Power method at drum axis
8.1.5 Deceleration method
8.2 Rolling resistance calculation
8.2.3 Torque method at drum axis
8.2.4 Power method at drum axis
8.2.5 Deceleration method |
Rolling Resistance
coefficient
: Max. 50 N/kN |
소재지-1 |
| Inmetro Regulation 379 :2021 |
Quality Technical Regulation for new tires intended for passenger cars, commercial light truck,commercial and towed vehicles.
Annex B2: Passenger car tires, including mixed-use and towed tires.
Annex B.3 Tires of commercial and light commercial vehicles and their towing.
|
Passenger Car Tires, Commercial Vehicle Tires
Dimensional test
Speed test under load |
소재지-1 |
| JIS D 4230:1998 |
Japanese Industrial Standard Tires for Automobile tyres |
Passenger Car Tires, Commercial Vehicle Tires |
소재지-1 |
| KS M 6750:2024 |
자동차용 타이어 |
승용차용 타이어, 소형 트럭용 타이어, 트럭 버스용 타이어 |
소재지-1 |
| SNI 0098:2019 |
Indonesian National Standard – Passenger car tire |
Passenger Car Tires |
소재지-1 |
| SNI 0099:2019 |
Indonesian National Standard – Truck and bus tire |
Commercial Vehicle Tires |
소재지-1 |
| SNI 0100:2019 |
Indonesian National Standard – Light truck tire |
Commercial Vehicle Tires |
소재지-1 |
| UN Regulation No. 117 – Rev.5:2025 + Amendment3:2025 |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 6. Test procedure for measuring rolling resistance
(Exception)
1. Test Methods
b) in the torque method
c) in the deceleration method
d) in the power method
4.6 Measurement of parasitic losses
4.6.1 Skim Test Reading
b) Record the spindle Ft, input torque Tt, or the power, whichever applies
4.6.2 Deceleration method
5.1 Determination of parasitic losses
5.1.3 Torque method at drum axis
5.1.4 Power method at drum axis
5.1.5 Deceleration method
5.2 Rolling resistance calculation
5.2.3 Torque method at drum axis
5.2.4 Power method at drum axis
5.2.5 Deceleration method |
Rolling resistance coefficient
: Max. 50N/kN |
소재지-1 |
| UN Regulation No.117 - Rev.4:2016 + Amendment2:2020 |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 5. Test procedures for measuring wet grip
(Exception)
Annex 5. Part A - C1 Category tyres
4.1 Testing methods (a) using and instrumented passenger car
Part B - C2 and C3 Category tyres
2.2 Standard vehicle procedure |
Adhesion on wet surface
: Class C1 tyres Load Index 77 ~ 121
: Class C2 tyres Load Index 88 ~ 121 |
소재지-2 |
UN Regulation No.117 - Rev.5:2025
+ Amendment3:2025 |
Uniform provisions concerning the
approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 5. Test procedures for measuring the adhesion on wet surfaces of tyres in new state
(Exception)
(A)-Class C1 tyres
4.1 Testing methods (a) using an instrumented passenger car
(B)-Classes C2 and C3 tyres
2.2 Standard vehicle procedure
Annex 9. Test procedure for measuring the adhesion on wet surfaces of tyres in worn state
(Exception)
2.4.1 Testing method (a) using an instrumented passenger car |
Adhesion on wet surface
: Class C1 tyres Load Index 77 ~ 121
: Class C2 tyres Load Index 88 ~ 121 |
소재지-2 |
| UN Regulation No.30 - Rev.3:2007 + Amendment12:2025 |
Uniform provisions concerning the approval of pneumatic tyres for motor vehicles and their trailers |
Passenger Car Tires |
소재지-1 |
| UN Regulation No.54 - Rev.3:2013 + Amendment9:2025 |
Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers. |
Commercial Vehicle Tires |
소재지-1 |
| 기후에너지환경부 제2025-61호 |
자동차용 타이어의 에너지 소비효율 측정 및 등급기준·표시
등에 관한 규정
[별표1] 타이어의 에너지소비효율 측정방법
1. 회전저항계수(Rolling Resistance Coefficient,
RRC) 측정방법
(적용제외)
[별표1] 타이어의 에너지소비효율 측정방법
1.2 시험방법
b) 토크 법(Torquemethod)
c) 감속법(Decelerationmethod)
d) 동력법(Powermethod)
1.5.6 수반손실 측정
b) 감속법(Decelerationmethod)
1.6.1 수반손실 결정
c) 드럼 축에서 토크 법(torque method)
d) 드럼 축에서 동력법(Power method)
e) 감속법(Decelerationmethod)
1.6.2 회전저항 계산
c) 드럼 축에서 토크 법(torque method)
d) 드럼 축에서 동력법(Power method)
e) 감속법(Deceleration method) |
회전저항(σm,i) : (0 ~ 50) N / kN, (0.01 N / kN) |
소재지-1 |
| 기후에너지환경부 제2025-61호 |
자동차용 타이어의 에너지 소비효율 측정 및 등급기준·표시 등에 관한 규정
[별표1] 타이어의 에너지소비효율 측정방법
2. 승용차용 젖은노면제동력지수(Wet Grip Index,
G) 측정방법
3. 소형트럭용 및 중대형트럭·버스용 타이어의 젖은노면제동력지수(Wet Grip Index, G) 측정방법
(적용제외)
[별표1] 타이어의 에너지소비효율 측정방법
2.4.1 표준 시험 차량을 이용한 방법
3.2 표준 시험 차량을 이용한 방법 |
젖은노면제동력:
승용차용 tyres Load Index 77~121
소형트럭용 tyres Load Index 88~121 |
소재지-2 |
| ▶ 음향특성 |
| AIS-142:2019 |
Evaluation of Tyres with Regard to Rolling Sound Emissions and/or to Adhesion on Wet Surfaces and/or to Rolling Resistance
ANNEX-A Coast-by test method for measuring tyre-rolling sound emission |
class C1 tyres
class C2 tyres |
소재지-2 |
| AIS-142:2019 |
Evaluation of Tyres with Regard to Rolling Sound Emissions and/or to Adhesion on Wet Surfaces and/or to Rolling Resistance
ANNEX-A Coast-by test method for measuring tyre-rolling sound emission |
class C1 tyres
class C2 tyres |
부속시설-1 |
| ISO 13325:2019 + Amendment1:2023(E) |
Tyres - Coast-by methods for measurement of
tyre-to-road sound emission
|
Class C1 tyres
Class C2 tyres |
소재지-2 |
| ISO 13325:2019 + Amendment1:2023(E) |
Tyres - Coast-by methods for measurement of
tyre-to-road sound emission
|
Class C1 tyres
Class C2 tyres |
부속시설-1 |
| KS M ISO 13325:2019 |
타이어 - 타이어에 의해 도로에서 발생되는 소리 측정용 타행 주행 방법 |
Class C1 tyres
Class C2 tyres |
소재지-2 |
| KS M ISO 13325:2019 |
타이어 - 타이어에 의해 도로에서 발생되는 소리 측정용 타행 주행 방법 |
Class C1 tyres
Class C2 tyres |
부속시설-1 |
| UN Regulation No. 117 - Rev.5:2025 + Amendment3:2025 |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 3. Coast-by test method for measuring tyre-rolling sound emission |
class C1 tyres class C2 tyres |
소재지-2 |
| UN Regulation No. 117 - Rev.5:2025 + Amendment3:2025 |
Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance
Annex 3. Coast-by test method for measuring tyre-rolling sound emission |
class C1 tyres class C2 tyres |
부속시설-1 |
